The following warning was reported when running "./test_progs -a
link_api -a linked_list" on a RISC-V QEMU VM:

  ------------[ cut here ]------------
  WARNING: CPU: 3 PID: 261 at kernel/bpf/memalloc.c:342 bpf_mem_refill
  Modules linked in: bpf_testmod(OE)
  CPU: 3 PID: 261 Comm: test_progs- ... 6.5.0-rc5-01743-gdcb152bb8328 #2
  Hardware name: riscv-virtio,qemu (DT)
  epc : bpf_mem_refill+0x1fc/0x206
   ra : irq_work_single+0x68/0x70
  epc : ffffffff801b1bc4 ra : ffffffff8015fe84 sp : ff2000000001be20
   gp : ffffffff82d26138 tp : ff6000008477a800 t0 : 0000000000046600
   t1 : ffffffff812b6ddc t2 : 0000000000000000 s0 : ff2000000001be70
   s1 : ff5ffffffffe8998 a0 : ff5ffffffffe8998 a1 : ff600003fef4b000
   a2 : 000000000000003f a3 : ffffffff80008250 a4 : 0000000000000060
   a5 : 0000000000000080 a6 : 0000000000000000 a7 : 0000000000735049
   s2 : ff5ffffffffe8998 s3 : 0000000000000022 s4 : 0000000000001000
   s5 : 0000000000000007 s6 : ff5ffffffffe8570 s7 : ffffffff82d6bd30
   s8 : 000000000000003f s9 : ffffffff82d2c5e8 s10: 000000000000ffff
   s11: ffffffff82d2c5d8 t3 : ffffffff81ea8f28 t4 : 0000000000000000
   t5 : ff6000008fd28278 t6 : 0000000000040000
  [<ffffffff801b1bc4>] bpf_mem_refill+0x1fc/0x206
  [<ffffffff8015fe84>] irq_work_single+0x68/0x70
  [<ffffffff8015feb4>] irq_work_run_list+0x28/0x36
  [<ffffffff8015fefa>] irq_work_run+0x38/0x66
  [<ffffffff8000828a>] handle_IPI+0x3a/0xb4
  [<ffffffff800a5c3a>] handle_percpu_devid_irq+0xa4/0x1f8
  [<ffffffff8009fafa>] generic_handle_domain_irq+0x28/0x36
  [<ffffffff800ae570>] ipi_mux_process+0xac/0xfa
  [<ffffffff8000a8ea>] sbi_ipi_handle+0x2e/0x88
  [<ffffffff8009fafa>] generic_handle_domain_irq+0x28/0x36
  [<ffffffff807ee70e>] riscv_intc_irq+0x36/0x4e
  [<ffffffff812b5d3a>] handle_riscv_irq+0x54/0x86
  [<ffffffff812b6904>] do_irq+0x66/0x98
  ---[ end trace 0000000000000000 ]---

The warning is due to WARN_ON_ONCE(tgt->unit_size != c->unit_size) in
free_bulk(). The direct reason is that a object is allocated and
freed by bpf_mem_caches with different unit_size.

The root cause is that KMALLOC_MIN_SIZE is 64 and there is no 96-bytes
slab cache in the specific VM. When linked_list test allocates a
72-bytes object through bpf_obj_new(), bpf_global_ma will allocate it
from a bpf_mem_cache with 96-bytes unit_size, but this bpf_mem_cache is
backed by 128-bytes slab cache. When the object is freed, bpf_mem_free()
uses ksize() to choose the corresponding bpf_mem_cache. Because the
object is allocated from 128-bytes slab cache, ksize() returns 128,
bpf_mem_free() chooses a 128-bytes bpf_mem_cache to free the object and
triggers the warning.

A similar warning will also be reported when using CONFIG_SLAB instead
of CONFIG_SLUB in a x86-64 kernel. Because CONFIG_SLUB defines
KMALLOC_MIN_SIZE as 8 but CONFIG_SLAB defines KMALLOC_MIN_SIZE as 32.

An alternative fix is to use kmalloc_size_round() in bpf_mem_alloc() to
choose a bpf_mem_cache which has the same unit_size with the backing
slab cache, but it may introduce performance degradation, so fix the
warning by adjusting the indexes in size_index according to the value of
KMALLOC_MIN_SIZE just like setup_kmalloc_cache_index_table() does.

Fixes: 822fb26b ("bpf: Add a hint to allocated objects.")
Reported-by: Björn Töpel <bjorn@kernel.org>
Closes: https://lore.kernel.org/bpf/87jztjmmy4.fsf@all.your.base.are.belong.to.usSigned-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20230908133923.2675053-2-houtao@huaweicloud.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Adding test that tries to attach program with bpf_override_return
helper to function not within error injection list.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230907200652.926951-2-jolsa@kernel.org

Currently the multi_kprobe link attach does not check error
injection list for programs with bpf_override_return helper
and allows them to attach anywhere. Adding the missing check.

Fixes: 0dcac272 ("bpf: Add multi kprobe link")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/bpf/20230907200652.926951-1-jolsa@kernel.org

I got the below warning when do fuzzing test:
unregister_netdevice: waiting for bond0 to become free. Usage count = 2

It can be repoduced via:

ip link add bond0 type bond
sysctl -w net.ipv4.conf.bond0.promote_secondaries=1
ip addr add 4.117.174.103/0 scope 0x40 dev bond0
ip addr add 192.168.100.111/255.255.255.254 scope 0 dev bond0
ip addr add 0.0.0.4/0 scope 0x40 secondary dev bond0
ip addr del 4.117.174.103/0 scope 0x40 dev bond0
ip link delete bond0 type bond

In this reproduction test case, an incorrect 'last_prim' is found in
__inet_del_ifa(), as a result, the secondary address(0.0.0.4/0 scope 0x40)
is lost. The memory of the secondary address is leaked and the reference of
in_device and net_device is leaked.

Fix this problem:
Look for 'last_prim' starting at location of the deleted IP and inserting
the promoted IP into the location of 'last_prim'.

Fixes: 0ff60a45 ("[IPV4]: Fix secondary IP addresses after promotion")
Signed-off-by: Liu Jian <liujian56@huawei.com>
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull networking updates from Jakub Kicinski:
 "Including fixes from netfilter and bpf.

  Current release - regressions:

   - eth: stmmac: fix failure to probe without MAC interface specified

  Current release - new code bugs:

   - docs: netlink: fix missing classic_netlink doc reference

  Previous releases - regressions:

   - deal with integer overflows in kmalloc_reserve()

   - use sk_forward_alloc_get() in sk_get_meminfo()

   - bpf_sk_storage: fix the missing uncharge in sk_omem_alloc

   - fib: avoid warn splat in flow dissector after packet mangling

   - skb_segment: call zero copy functions before using skbuff frags

   - eth: sfc: check for zero length in EF10 RX prefix

  Previous releases - always broken:

   - af_unix: fix msg_controllen test in scm_pidfd_recv() for
     MSG_CMSG_COMPAT

   - xsk: fix xsk_build_skb() dereferencing possible ERR_PTR()

   - netfilter:
      - nft_exthdr: fix non-linear header modification
      - xt_u32, xt_sctp: validate user space input
      - nftables: exthdr: fix 4-byte stack OOB write
      - nfnetlink_osf: avoid OOB read
      - one more fix for the garbage collection work from last release

   - igmp: limit igmpv3_newpack() packet size to IP_MAX_MTU

   - bpf, sockmap: fix preempt_rt splat when using raw_spin_lock_t

   - handshake: fix null-deref in handshake_nl_done_doit()

   - ip: ignore dst hint for multipath routes to ensure packets are
     hashed across the nexthops

   - phy: micrel:
      - correct bit assignments for cable test errata
      - disable EEE according to the KSZ9477 errata

  Misc:

   - docs/bpf: document compile-once-run-everywhere (CO-RE) relocations

   - Revert "net: macsec: preserve ingress frame ordering", it appears
     to have been developed against an older kernel, problem doesn't
     exist upstream"

* tag 'net-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (95 commits)
  net: enetc: distinguish error from valid pointers in enetc_fixup_clear_rss_rfs()
  Revert "net: team: do not use dynamic lockdep key"
  net: hns3: remove GSO partial feature bit
  net: hns3: fix the port information display when sfp is absent
  net: hns3: fix invalid mutex between tc qdisc and dcb ets command issue
  net: hns3: fix debugfs concurrency issue between kfree buffer and read
  net: hns3: fix byte order conversion issue in hclge_dbg_fd_tcam_read()
  net: hns3: Support query tx timeout threshold by debugfs
  net: hns3: fix tx timeout issue
  net: phy: Provide Module 4 KSZ9477 errata (DS80000754C)
  netfilter: nf_tables: Unbreak audit log reset
  netfilter: ipset: add the missing IP_SET_HASH_WITH_NET0 macro for ip_set_hash_netportnet.c
  netfilter: nft_set_rbtree: skip sync GC for new elements in this transaction
  netfilter: nf_tables: uapi: Describe NFTA_RULE_CHAIN_ID
  netfilter: nfnetlink_osf: avoid OOB read
  netfilter: nftables: exthdr: fix 4-byte stack OOB write
  selftests/bpf: Check bpf_sk_storage has uncharged sk_omem_alloc
  bpf: bpf_sk_storage: Fix the missing uncharge in sk_omem_alloc
  bpf: bpf_sk_storage: Fix invalid wait context lockdep report
  s390/bpf: Pass through tail call counter in trampolines
  ...

Pull more devicetree updates from Rob Herring:
 "A couple of conversions which didn't get picked up by the subsystems
  and one fix:

   - Convert st,stih407-irq-syscfg and Omnivision OV7251 bindings to DT
     schema

   - Merge Omnivision OV5695 into OV5693 binding

   - Fix of_overlay_fdt_apply prototype when !CONFIG_OF_OVERLAY"

* tag 'devicetree-fixes-for-6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  dt-bindings: irqchip: convert st,stih407-irq-syscfg to DT schema
  media: dt-bindings: Convert Omnivision OV7251 to DT schema
  media: dt-bindings: Merge OV5695 into OV5693 binding
  of: overlay: Fix of_overlay_fdt_apply prototype when !CONFIG_OF_OVERLAY

Merge tag 'pwm/for-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm

Pull pwm updates from Thierry Reding:
 "Various cleanups and fixes across the board"

* tag 'pwm/for-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (31 commits)
  pwm: lpc32xx: Remove handling of PWM channels
  pwm: atmel: Simplify using devm functions
  dt-bindings: pwm: brcm,kona-pwm: convert to YAML
  pwm: stmpe: Handle errors when disabling the signal
  pwm: stm32: Simplify using devm_pwmchip_add()
  pwm: stm32: Don't modify HW state in .remove() callback
  pwm: Fix order of freeing resources in pwmchip_remove()
  pwm: ntxec: Use device_set_of_node_from_dev()
  pwm: ntxec: Drop a write-only variable from driver data
  pwm: pxa: Don't reimplement of_device_get_match_data()
  pwm: lpc18xx-sct: Simplify using devm_clk_get_enabled()
  pwm: atmel-tcb: Don't track polarity in driver data
  pwm: atmel-tcb: Unroll atmel_tcb_pwm_set_polarity() into only caller
  pwm: atmel-tcb: Put per-channel data into driver data
  pwm: atmel-tcb: Fix resource freeing in error path and remove
  pwm: atmel-tcb: Harmonize resource allocation order
  pwm: Drop unused #include <linux/radix-tree.h>
  pwm: rz-mtu3: Fix build warning 'num_channel_ios' not described
  pwm: Remove outdated documentation for pwmchip_remove()
  pwm: atmel: Enable clk when pwm already enabled in bootloader
  ...

Pull RTC updates from Alexandre Belloni:
 "Subsystem:

   - Add a way for drivers to tell the core the supported alarm range is
     smaller than the date range. This is not used yet but will be
     useful for the alarmtimers in the next release.

   - fix Wvoid-pointer-to-enum-cast warnings

   - remove redundant of_match_ptr()

   - stop warning for invalid alarms when the alarm is disabled

  Drivers:

   - isl12022: allow setting the trip level for battery level detection

   - pcf2127: add support for PCF2131 and multiple timestamps

   - stm32: time precision improvement, many fixes

   - twl: NVRAM support"

* tag 'rtc-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (73 commits)
  dt-bindings: rtc: ds3231: Remove text binding
  rtc: wm8350: remove unnecessary messages
  rtc: twl: remove unnecessary messages
  rtc: sun6i: remove unnecessary message
  rtc: stop warning for invalid alarms when the alarm is disabled
  rtc: twl: add NVRAM support
  rtc: pcf85363: Allow to wake up system without IRQ
  rtc: m48t86: add DT support for m48t86
  dt-bindings: rtc: Add ST M48T86
  rtc: pcf2127: remove useless check
  rtc: rzn1: Report maximum alarm limit to rtc core
  rtc: ds1305: Report maximum alarm limit to rtc core
  rtc: tps6586x: Report maximum alarm limit to rtc core
  rtc: cmos: Report supported alarm limit to rtc infrastructure
  rtc: cros-ec: Detect and report supported alarm window size
  rtc: Add support for limited alarm timer offsets
  rtc: isl1208: Fix incorrect logic in isl1208_set_xtoscb()
  MAINTAINERS: remove obsolete pattern in RTC SUBSYSTEM section
  rtc: tps65910: Remove redundant dev_warn() and do not check for 0 return after calling platform_get_irq()
  rtc: omap: Do not check for 0 return after calling platform_get_irq()
  ...

Pull i3c updates from Alexandre Belloni:
 "Core:
   - Fix SETDASA when static and dynamic adress are equal
   - Fix cmd_v1 DAA exit criteria

  Drivers:
   - svc: allow probing without any device"

* tag 'i3c/for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
  i3c: master: svc: fix probe failure when no i3c device exist
  i3c: master: Fix SETDASA process
  dt-bindings: i3c: Fix description for assigned-address
  i3c: master: svc: Describe member 'saved_regs'
  i3c: master: svc: Do not check for 0 return after calling platform_get_irq()
  i3c/master: cmd_v1: Fix the exit criteria for the daa procedure
  i3c: Explicitly include correct DT includes

Merge tag 'regulator-fix-v6.6-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator fixes from Mark Brown:
 "A couple of fixes that came in during the merge window, both driver
  specific - one for a bug that came up in testing, one for a bug due
  to a misreading of the datasheet"

* tag 'regulator-fix-v6.6-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: tps6594-regulator: Fix random kernel crash
  regulator: tps6287x: Fix n_voltages

Pull spi fixes from Mark Brown:
 "A couple of fixes for the sun6i driver. The patch to reduce DMA RX to
  single byte width all the time is *hopefully* excessively cautious but
  it's unclear which SoCs are affected so the fix just covers everything
  for safety"

* tag 'spi-fix-v6.6-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: sun6i: fix race between DMA RX transfer completion and RX FIFO drain
  spi: sun6i: reduce DMA RX transfer width to single byte

Pull kvm updates from Paolo Bonzini:
 "ARM:

   - Clean up vCPU targets, always returning generic v8 as the preferred
     target

   - Trap forwarding infrastructure for nested virtualization (used for
     traps that are taken from an L2 guest and are needed by the L1
     hypervisor)

   - FEAT_TLBIRANGE support to only invalidate specific ranges of
     addresses when collapsing a table PTE to a block PTE. This avoids
     that the guest refills the TLBs again for addresses that aren't
     covered by the table PTE.

   - Fix vPMU issues related to handling of PMUver.

   - Don't unnecessary align non-stack allocations in the EL2 VA space

   - Drop HCR_VIRT_EXCP_MASK, which was never used...

   - Don't use smp_processor_id() in kvm_arch_vcpu_load(), but the cpu
     parameter instead

   - Drop redundant call to kvm_set_pfn_accessed() in user_mem_abort()

   - Remove prototypes without implementations

  RISC-V:

   - Zba, Zbs, Zicntr, Zicsr, Zifencei, and Zihpm support for guest

   - Added ONE_REG interface for SATP mode

   - Added ONE_REG interface to enable/disable multiple ISA extensions

   - Improved error codes returned by ONE_REG interfaces

   - Added KVM_GET_REG_LIST ioctl() implementation for KVM RISC-V

   - Added get-reg-list selftest for KVM RISC-V

  s390:

   - PV crypto passthrough enablement (Tony, Steffen, Viktor, Janosch)

     Allows a PV guest to use crypto cards. Card access is governed by
     the firmware and once a crypto queue is "bound" to a PV VM every
     other entity (PV or not) looses access until it is not bound
     anymore. Enablement is done via flags when creating the PV VM.

   - Guest debug fixes (Ilya)

  x86:

   - Clean up KVM's handling of Intel architectural events

   - Intel bugfixes

   - Add support for SEV-ES DebugSwap, allowing SEV-ES guests to use
     debug registers and generate/handle #DBs

   - Clean up LBR virtualization code

   - Fix a bug where KVM fails to set the target pCPU during an IRTE
     update

   - Fix fatal bugs in SEV-ES intrahost migration

   - Fix a bug where the recent (architecturally correct) change to
     reinject #BP and skip INT3 broke SEV guests (can't decode INT3 to
     skip it)

   - Retry APIC map recalculation if a vCPU is added/enabled

   - Overhaul emergency reboot code to bring SVM up to par with VMX, tie
     the "emergency disabling" behavior to KVM actually being loaded,
     and move all of the logic within KVM

   - Fix user triggerable WARNs in SVM where KVM incorrectly assumes the
     TSC ratio MSR cannot diverge from the default when TSC scaling is
     disabled up related code

   - Add a framework to allow "caching" feature flags so that KVM can
     check if the guest can use a feature without needing to search
     guest CPUID

   - Rip out the ancient MMU_DEBUG crud and replace the useful bits with
     CONFIG_KVM_PROVE_MMU

   - Fix KVM's handling of !visible guest roots to avoid premature
     triple fault injection

   - Overhaul KVM's page-track APIs, and KVMGT's usage, to reduce the
     API surface that is needed by external users (currently only
     KVMGT), and fix a variety of issues in the process

  Generic:

   - Wrap kvm_{gfn,hva}_range.pte in a union to allow mmu_notifier
     events to pass action specific data without needing to constantly
     update the main handlers.

   - Drop unused function declarations

  Selftests:

   - Add testcases to x86's sync_regs_test for detecting KVM TOCTOU bugs

   - Add support for printf() in guest code and covert all guest asserts
     to use printf-based reporting

   - Clean up the PMU event filter test and add new testcases

   - Include x86 selftests in the KVM x86 MAINTAINERS entry"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (279 commits)
  KVM: x86/mmu: Include mmu.h in spte.h
  KVM: x86/mmu: Use dummy root, backed by zero page, for !visible guest roots
  KVM: x86/mmu: Disallow guest from using !visible slots for page tables
  KVM: x86/mmu: Harden TDP MMU iteration against root w/o shadow page
  KVM: x86/mmu: Harden new PGD against roots without shadow pages
  KVM: x86/mmu: Add helper to convert root hpa to shadow page
  drm/i915/gvt: Drop final dependencies on KVM internal details
  KVM: x86/mmu: Handle KVM bookkeeping in page-track APIs, not callers
  KVM: x86/mmu: Drop @slot param from exported/external page-track APIs
  KVM: x86/mmu: Bug the VM if write-tracking is used but not enabled
  KVM: x86/mmu: Assert that correct locks are held for page write-tracking
  KVM: x86/mmu: Rename page-track APIs to reflect the new reality
  KVM: x86/mmu: Drop infrastructure for multiple page-track modes
  KVM: x86/mmu: Use page-track notifiers iff there are external users
  KVM: x86/mmu: Move KVM-only page-track declarations to internal header
  KVM: x86: Remove the unused page-track hook track_flush_slot()
  drm/i915/gvt: switch from ->track_flush_slot() to ->track_remove_region()
  KVM: x86: Add a new page-track hook to handle memslot deletion
  drm/i915/gvt: Don't bother removing write-protection on to-be-deleted slot
  KVM: x86: Reject memslot MOVE operations if KVMGT is attached
  ...

enetc_psi_create() returns an ERR_PTR() or a valid station interface
pointer, but checking for the non-NULL quality of the return code blurs
that difference away. So if enetc_psi_create() fails, we call
enetc_psi_destroy() when we shouldn't. This will likely result in
crashes, since enetc_psi_create() cleans up everything after itself when
it returns an ERR_PTR().

Fixes: f0168042 ("net: enetc: reimplement RFS/RSS memory clearing as PCI quirk")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/netdev/582183ef-e03b-402b-8e2d-6d9bb3c83bd9@moroto.mountain/Suggested-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230906141609.247579-1-vladimir.oltean@nxp.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

This reverts commit 39285e12.

Looks like the change has unintended consequences in exposing
objects before they are initialized. Let's drop this patch
and try again in net-next.

Reported-by: syzbot+44ae022028805f4600fc@syzkaller.appspotmail.com
Fixes: 39285e12 ("net: team: do not use dynamic lockdep key")
Link: https://lore.kernel.org/all/20230907103124.6adb7256@kernel.org/Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Pull more s390 updates from Heiko Carstens:

 - A couple of virtual vs physical address confusion fixes

 - Rework locking in dcssblk driver to address a lockdep warning

 - Remove support for "noexec" kernel command line option since there is
   no use case where it would make sense

 - Simplify kernel mapping setup and get rid of quite a bit of code

 - Add architecture specific __set_memory_yy() functions which allow us
   to modify kernel mappings. Unlike the set_memory_xx() variants they
   take void pointer start and end parameters, which allows using them
   without the usual casts, and also to use them on areas larger than
   8TB.

   Note that the set_memory_xx() family comes with an int num_pages
   parameter which overflows with 8TB. This could be addressed by
   changing the num_pages parameter to unsigned long, however requires
   to change all architectures, since the module code expects an int
   parameter (see module_set_memory()).

   This was indeed an issue since for debug_pagealloc() we call
   set_memory_4k() on the whole identity mapping. Therefore address this
   for now with the __set_memory_yy() variant, and address common code
   later

 - Use dev_set_name() and also fix memory leak in zcrypt driver error
   handling

 - Remove unused lsi_mask from airq_struct

 - Add warning for invalid kernel mapping requests

* tag 's390-6.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/vmem: do not silently ignore mapping limit
  s390/zcrypt: utilize dev_set_name() ability to use a formatted string
  s390/zcrypt: don't leak memory if dev_set_name() fails
  s390/mm: fix MAX_DMA_ADDRESS physical vs virtual confusion
  s390/airq: remove lsi_mask from airq_struct
  s390/mm: use __set_memory() variants where useful
  s390/set_memory: add __set_memory() variant
  s390/set_memory: generate all set_memory() functions
  s390/mm: improve description of mapping permissions of prefix pages
  s390/amode31: change type of __samode31, __eamode31, etc
  s390/mm: simplify kernel mapping setup
  s390: remove "noexec" option
  s390/vmem: fix virtual vs physical address confusion
  s390/dcssblk: fix lockdep warning
  s390/monreader: fix virtual vs physical address confusion

Pull MIPS updates from Thomas Bogendoerfer:
 "Just cleanups and fixes"

* tag 'mips_6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
  MIPS: TXx9: Do PCI error checks on own line
  arch/mips/configs/*_defconfig cleanup
  MIPS: VDSO: Conditionally export __vdso_gettimeofday()
  Mips: loongson3_defconfig: Enable ast drm driver by default
  mips: remove <asm/export.h>
  mips: replace #include <asm/export.h> with #include <linux/export.h>
  mips: remove unneeded #include <asm/export.h>
  MIPS: Loongson64: Fix more __iomem attributes
  MIPS: loongson32: Remove regs-rtc.h
  MIPS: loongson32: Remove regs-clk.h
  MIPS: More explicit DT include clean-ups
  MIPS: Fixup explicit DT include clean-up
  Revert MIPS: Loongson: Fix build error when make modules_install
  MIPS: Only fiddle with CHECKFLAGS if `need-compiler'
  MIPS: Fix CONFIG_CPU_DADDI_WORKAROUNDS `modules_install' regression
  MIPS: Explicitly include correct DT includes

Pull xtensa updates from Max Filippov:

 - enable MTD XIP support

 - fix base address of the xtensa perf module in newer hardware

* tag 'xtensa-20230905' of https://github.com/jcmvbkbc/linux-xtensa:
  xtensa: add XIP-aware MTD support
  xtensa: PMU: fix base address for the newer hardware

Recently we moved most cleanup from ntfs_put_super() into
ntfs3_kill_sb() as part of a bigger cleanup.  This accidently also moved
dropping inode references stashed in ntfs3's sb->s_fs_info from
@sb->put_super() to @sb->kill_sb().  But generic_shutdown_super()
verifies that there are no busy inodes past sb->put_super().  Fix this
and disentangle dropping inode references from freeing @sb->s_fs_info.

Fixes: a4f64a30 ("ntfs3: free the sbi in ->kill_sb") # mainline only
Reported-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Mateusz reports that glibc turns 'fstat()' calls into 'fstatat()', and
that seems to have been going on for quite a long time due to glibc
having tried to simplify its stat logic into just one point.

This turns out to cause completely unnecessary overhead, where we then
go off and allocate the kernel side pathname, and actually look up the
empty path.  Sure, our path lookup is quite optimized, but it still
causes a fair bit of allocation overhead and a couple of completely
unnecessary rounds of lockref accesses etc.

This is all hopefully getting fixed in user space, and there is a patch
floating around for just having glibc use the native fstat() system
call.  But even with the current situation we can at least improve on
things by catching the situation and short-circuiting it.

Note that this is still measurably slower than just a plain 'fstat()',
since just checking that the filename is actually empty is somewhat
expensive due to inevitable user space access overhead from the kernel
(ie verifying pointers, and SMAP on x86).  But it's still quite a bit
faster than actually looking up the path for real.

To quote numers from Mateusz:
 "Sapphire Rapids, will-it-scale, ops/s

  stock fstat	5088199
  patched fstat	7625244	(+49%)
  real fstat	8540383	(+67% / +12%)"

where that 'stock fstat' is the glibc translation of fstat into
fstatat() with an empty path, the 'patched fstat' is with this short
circuiting of the path lookup, and the 'real fstat' is the actual native
fstat() system call with none of this overhead.

Link: https://lore.kernel.org/lkml/20230903204858.lv7i3kqvw6eamhgz@f/Reported-by: Mateusz Guzik <mjguzik@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Florian Westphal says:

====================
netfilter updates for net

This PR contains nf_tables updates for your *net* tree.
This time almost all fixes are for old bugs:

First patch fixes a 4-byte stack OOB write, from myself.
This was broken ever since nftables was switches from 128 to 32bit
register addressing in v4.1.

2nd patch fixes an out-of-bounds read.
This has been broken ever since xt_osf got added in 2.6.31, the bug
was then just moved around during refactoring, from Wander Lairson Costa.

3rd patch adds a missing enum description, from Phil Sutter.

4th patch fixes a UaF inftables that occurs when userspace adds
elements with a timeout so small that expiration happens while the
transaction is still in progress.  Fix from Pablo Neira Ayuso.

Patch 5 fixes a memory out of bounds access, this was
broken since v4.20. Patch from Kyle Zeng and Jozsef Kadlecsik.

Patch 6 fixes another bogus memory access when building audit
record. Bug added in the previous pull request, fix from Pablo.

netfilter pull request 2023-09-06

* tag 'nf-23-09-06' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
  netfilter: nf_tables: Unbreak audit log reset
  netfilter: ipset: add the missing IP_SET_HASH_WITH_NET0 macro for ip_set_hash_netportnet.c
  netfilter: nft_set_rbtree: skip sync GC for new elements in this transaction
  netfilter: nf_tables: uapi: Describe NFTA_RULE_CHAIN_ID
  netfilter: nfnetlink_osf: avoid OOB read
  netfilter: nftables: exthdr: fix 4-byte stack OOB write
====================

Link: https://lore.kernel.org/r/20230906162525.11079-1-fw@strlen.deSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Jijie Shao says:

====================
There are some bugfix for the HNS3 ethernet driver
====================

Link: https://lore.kernel.org/r/20230906072018.3020671-1-shaojijie@huawei.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

HNS3 NIC does not support GSO partial packets segmentation. Actually tunnel
packets for example NvGRE packets segment offload and checksum offload is
already supported. There is no need to keep gso partial feature bit. So
this patch removes it.

Fixes: 76ad4f0e ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC")
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

When sfp is absent or unidentified, the port type should be
displayed as PORT_OTHERS, rather than PORT_FIBRE.

Fixes: 88d10bd6 ("net: hns3: add support for multiple media type")
Signed-off-by: Yisen Zhuang <yisen.zhuang@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

We hope that tc qdisc and dcb ets commands can not be used crosswise.
If we want to use any of the commands to configure tc,
We must use the other command to clear the existing configuration.

However, when we configure a single tc with tc qdisc,
we can still configure it with dcb ets.
Because we use mqprio_active as the tag of tc qdisc configuration,
but with dcb ets, we do not check mqprio_active.

This patch fix this issue by check mqprio_active before
executing the dcb ets command. and add dcb_ets_active to
replace HCLGE_FLAG_DCB_ENABLE and HCLGE_FLAG_MQPRIO_ENABLE
at the hclge layer,

Fixes: cacde272 ("net: hns3: Add hclge_dcb module for the support of DCB feature")
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Now in hns3_dbg_uninit(), there may be concurrency between
kfree buffer and read, it may result in memory error.

Moving debugfs_remove_recursive() in front of kfree buffer to ensure
they don't happen at the same time.

Fixes: 5e69ea7e ("net: hns3: refactor the debugfs process")
Signed-off-by: Hao Chen <chenhao418@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

req1->tcam_data is defined as "u8 tcam_data[8]", and we convert it as
(u32 *) without considerring byte order conversion,
it may result in printing wrong data for tcam_data.

Convert tcam_data to (__le32 *) first to fix it.

Fixes: b5a0b70d ("net: hns3: refactor dump fd tcam of debugfs")
Signed-off-by: Hao Chen <chenhao418@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

support query tx timeout threshold by debugfs
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Currently, the driver knocks the ring doorbell before updating
the ring->last_to_use in tx flow. if the hardware transmiting
packet and napi poll scheduling are fast enough, it may get
the old ring->last_to_use in drivers' napi poll.
In this case, the driver will think the tx is not completed, and
return directly without clear the flag __QUEUE_STATE_STACK_XOFF,
which may cause tx timeout.

Fixes: 20d06ca2 ("net: hns3: optimize the tx clean process")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

The KSZ9477 errata points out (in 'Module 4') the link up/down problems
when EEE (Energy Efficient Ethernet) is enabled in the device to which
the KSZ9477 tries to auto negotiate.

The suggested workaround is to clear advertisement of EEE for PHYs in
this chip driver.

To avoid regressions with other switch ICs the new MICREL_NO_EEE flag
has been introduced.

Moreover, the in-register disablement of MMD_DEVICE_ID_EEE_ADV.MMD_EEE_ADV
MMD register is removed, as this code is both; now executed too late
(after previous rework of the PHY and DSA for KSZ switches) and not
required as setting all members of eee_broken_modes bit field prevents
the KSZ9477 from advertising EEE.

Fixes: 69d3b36c ("net: dsa: microchip: enable EEE support") # for KSZ9477
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Tested-by: Oleksij Rempel <o.rempel@pengutronix.de> # Confirmed disabled EEE with oscilloscope.
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20230905093315.784052-1-lukma@denx.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Daniel Borkmann says:

====================
pull-request: bpf 2023-09-06

We've added 9 non-merge commits during the last 6 day(s) which contain
a total of 12 files changed, 189 insertions(+), 44 deletions(-).

The main changes are:

1) Fix bpf_sk_storage to address an invalid wait context lockdep
   report and another one to address missing omem uncharge,
   from Martin KaFai Lau.

2) Two BPF recursion detection related fixes,
   from Sebastian Andrzej Siewior.

3) Fix tailcall limit enforcement in trampolines for s390 JIT,
   from Ilya Leoshkevich.

4) Fix a sockmap refcount race where skbs in sk_psock_backlog can
   be referenced after user space side has already skb_consumed them,
   from John Fastabend.

5) Fix BPF CI flake/race wrt sockmap vsock write test where
   the transport endpoint is not connected, from Xu Kuohai.

6) Follow-up doc fix to address a cross-link warning,
   from Eduard Zingerman.

* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
  selftests/bpf: Check bpf_sk_storage has uncharged sk_omem_alloc
  bpf: bpf_sk_storage: Fix the missing uncharge in sk_omem_alloc
  bpf: bpf_sk_storage: Fix invalid wait context lockdep report
  s390/bpf: Pass through tail call counter in trampolines
  bpf: Assign bpf_tramp_run_ctx::saved_run_ctx before recursion check.
  bpf: Invoke __bpf_prog_exit_sleepable_recur() on recursion in kern_sys_bpf().
  bpf, sockmap: Fix skb refcnt race after locking changes
  docs/bpf: Fix "file doesn't exist" warnings in {llvm_reloc,btf}.rst
  selftests/bpf: Fix a CI failure caused by vsock write
====================

Link: https://lore.kernel.org/r/20230906095117.16941-1-daniel@iogearbox.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pull ceph updates from Ilya Dryomov:
 "Mixed with some fixes and cleanups, this brings in reasonably complete
  fscrypt support to CephFS! The list of things which don't work with
  encryption should be fairly short, mostly around the edges: fallocate
  (not supported well in CephFS to begin with), copy_file_range
  (requires re-encryption), non-default striping patterns.

  This was a multi-year effort principally by Jeff Layton with
  assistance from Xiubo Li, Luís Henriques and others, including several
  dependant changes in the MDS, netfs helper library and fscrypt
  framework itself"

* tag 'ceph-for-6.6-rc1' of https://github.com/ceph/ceph-client: (53 commits)
  ceph: make num_fwd and num_retry to __u32
  ceph: make members in struct ceph_mds_request_args_ext a union
  rbd: use list_for_each_entry() helper
  libceph: do not include crypto/algapi.h
  ceph: switch ceph_lookup/atomic_open() to use new fscrypt helper
  ceph: fix updating i_truncate_pagecache_size for fscrypt
  ceph: wait for OSD requests' callbacks to finish when unmounting
  ceph: drop messages from MDS when unmounting
  ceph: update documentation regarding snapshot naming limitations
  ceph: prevent snapshot creation in encrypted locked directories
  ceph: add support for encrypted snapshot names
  ceph: invalidate pages when doing direct/sync writes
  ceph: plumb in decryption during reads
  ceph: add encryption support to writepage and writepages
  ceph: add read/modify/write to ceph_sync_write
  ceph: align data in pages in ceph_sync_write
  ceph: don't use special DIO path for encrypted inodes
  ceph: add truncate size handling support for fscrypt
  ceph: add object version support for sync read
  libceph: allow ceph_osdc_new_request to accept a multi-op read
  ...

Pull input updates from Dmitry Torokhov:

 - a new driver for Azoteq IQS7210A/7211A/E touch controllers

 - support for Azoteq IQS7222D variant added to iqs7222 driver

 - support for touch keys functionality added to Melfas MMS114 driver

 - new hardware IDs added to exc3000 and Goodix drivers

 - xpad driver gained support for GameSir T4 Kaleid Controller

 - a fix for xpad driver to properly support some third-party
   controllers that need a magic packet to start properly

 - a fix for psmouse driver to more reliably switch to RMI4 mode on
   devices that use native RMI4/SMbus protocol

 - a quirk for i8042 for TUXEDO Gemini 17 Gen1/Clevo PD70PN laptops

 - multiple drivers have been updated to make use of devm and other
   newer APIs such as dev_err_probe(), devm_regulator_get_enable(), and
   others.

* tag 'input-for-v6.6-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (83 commits)
  Input: goodix - add support for ACPI ID GDX9110
  Input: rpckbd - fix the return value handle for platform_get_irq()
  Input: tca6416-keypad - switch to using input core's polling features
  Input: tca6416-keypad - convert to use devm_* api
  Input: tca6416-keypad - fix interrupt enable disbalance
  Input: tca6416-keypad - rely on I2C core to set up suspend/resume
  Input: tca6416-keypad - always expect proper IRQ number in i2c client
  Input: lm8323 - convert to use devm_* api
  Input: lm8323 - rely on device core to create kp_disable attribute
  Input: qt2160 - convert to use devm_* api
  Input: qt2160 - do not hard code interrupt trigger
  Input: qt2160 - switch to using threaded interrupt handler
  Input: qt2160 - tweak check for i2c adapter functionality
  Input: psmouse - add delay when deactivating for SMBus mode
  Input: mcs-touchkey - fix uninitialized use of error in mcs_touchkey_probe()
  Input: qt1070 - convert to use devm_* api
  Input: mcs-touchkey - convert to use devm_* api
  Input: amikbd - convert to use devm_* api
  Input: lm8333 - convert to use devm_* api
  Input: mms114 - add support for touch keys
  ...

Pull watchdog updates from Wim Van Sebroeck:

 - add marvell GTI watchdog driver

 - add support for Amlogic-T7 SoCs

 - document the IPQ5018 watchdog compatible

 - enable COMPILE_TEST for more watchdog device drivers

 - core: stop watchdog when executing poweroff command

 - other small improvements and fixes

* tag 'linux-watchdog-6.6-rc1' of git://www.linux-watchdog.org/linux-watchdog: (21 commits)
  watchdog: Add support for Amlogic-T7 SoCs
  watchdog: Add a new struct for Amlogic-GXBB driver
  dt-bindings: watchdog: Add support for Amlogic-T7 SoCs
  dt-bindings: watchdog: qcom-wdt: document IPQ5018
  watchdog: imx2_wdt: Improve dev_crit() message
  watchdog: stm32: Drop unnecessary of_match_ptr()
  watchdog: sama5d4: readout initial state
  watchdog: intel-mid_wdt: add MODULE_ALIAS() to allow auto-load
  watchdog: core: stop watchdog when executing poweroff command
  watchdog: pm8916_wdt: Remove redundant of_match_ptr()
  watchdog: xilinx_wwdt: Use div_u64() in xilinx_wwdt_start()
  watchdog: starfive: Remove #ifdef guards for PM related functions
  watchdog: s3c2410: Fix potential deadlock on &wdt->lock
  watchdog:rit_wdt: Add support for WDIOF_CARDRESET
  dt-bindings: watchdog: ti,rti-wdt: Add support for WDIOF_CARDRESET
  watchdog: Enable COMPILE_TEST for more drivers
  watchdog: advantech_ec_wdt: fix Kconfig dependencies
  watchdog: Explicitly include correct DT includes
  Watchdog: Add marvell GTI watchdog driver
  dt-bindings: watchdog: marvell GTI system watchdog driver
  ...

Deliver audit log from __nf_tables_dump_rules(), table dereference at
the end of the table list loop might point to the list head, leading to
this crash.

[ 4137.407349] BUG: unable to handle page fault for address: 00000000001f3c50
[ 4137.407357] #PF: supervisor read access in kernel mode
[ 4137.407359] #PF: error_code(0x0000) - not-present page
[ 4137.407360] PGD 0 P4D 0
[ 4137.407363] Oops: 0000 [#1] PREEMPT SMP PTI
[ 4137.407365] CPU: 4 PID: 500177 Comm: nft Not tainted 6.5.0+ #277
[ 4137.407369] RIP: 0010:string+0x49/0xd0
[ 4137.407374] Code: ff 77 36 45 89 d1 31 f6 49 01 f9 66 45 85 d2 75 19 eb 1e 49 39 f8 76 02 88 07 48 83 c7 01 83 c6 01 48 83 c2 01 4c 39 cf 74 07 <0f> b6 02 84 c0 75 e2 4c 89 c2 e9 58 e5 ff ff 48 c7 c0 0e b2 ff 81
[ 4137.407377] RSP: 0018:ffff8881179737f0 EFLAGS: 00010286
[ 4137.407379] RAX: 00000000001f2c50 RBX: ffff888117973848 RCX: ffff0a00ffffff04
[ 4137.407380] RDX: 00000000001f3c50 RSI: 0000000000000000 RDI: 0000000000000000
[ 4137.407381] RBP: 0000000000000000 R08: 0000000000000000 R09: 00000000ffffffff
[ 4137.407383] R10: ffffffffffffffff R11: ffff88813584d200 R12: 0000000000000000
[ 4137.407384] R13: ffffffffa15cf709 R14: 0000000000000000 R15: ffffffffa15cf709
[ 4137.407385] FS:  00007fcfc18bb580(0000) GS:ffff88840e700000(0000) knlGS:0000000000000000
[ 4137.407387] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 4137.407388] CR2: 00000000001f3c50 CR3: 00000001055b2001 CR4: 00000000001706e0
[ 4137.407390] Call Trace:
[ 4137.407392]  <TASK>
[ 4137.407393]  ? __die+0x1b/0x60
[ 4137.407397]  ? page_fault_oops+0x6b/0xa0
[ 4137.407399]  ? exc_page_fault+0x60/0x120
[ 4137.407403]  ? asm_exc_page_fault+0x22/0x30
[ 4137.407408]  ? string+0x49/0xd0
[ 4137.407410]  vsnprintf+0x257/0x4f0
[ 4137.407414]  kvasprintf+0x3e/0xb0
[ 4137.407417]  kasprintf+0x3e/0x50
[ 4137.407419]  nf_tables_dump_rules+0x1c0/0x360 [nf_tables]
[ 4137.407439]  ? __alloc_skb+0xc3/0x170
[ 4137.407442]  netlink_dump+0x170/0x330
[ 4137.407447]  __netlink_dump_start+0x227/0x300
[ 4137.407449]  nf_tables_getrule+0x205/0x390 [nf_tables]

Deliver audit log only once at the end of the rule dump+reset for
consistency with the set dump+reset.

Ensure audit reset access to table under rcu read side lock. The table
list iteration holds rcu read lock side, but recent audit code
dereferences table object out of the rcu read lock side.

Fixes: ea078ae9 ("netfilter: nf_tables: Audit log rule reset")
Fixes: 7e9be112 ("netfilter: nf_tables: Audit log setelem reset")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Acked-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Florian Westphal <fw@strlen.de>

The missing IP_SET_HASH_WITH_NET0 macro in ip_set_hash_netportnet can
lead to the use of wrong `CIDR_POS(c)` for calculating array offsets,
which can lead to integer underflow. As a result, it leads to slab
out-of-bound access.
This patch adds back the IP_SET_HASH_WITH_NET0 macro to
ip_set_hash_netportnet to address the issue.

Fixes: 886503f3 ("netfilter: ipset: actually allow allowable CIDR 0 in hash:net,port,net")
Suggested-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Kyle Zeng <zengyhkyle@gmail.com>
Acked-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>

New elements in this transaction might expired before such transaction
ends. Skip sync GC for such elements otherwise commit path might walk
over an already released object. Once transaction is finished, async GC
will collect such expired element.

Fixes: f6c383b8 ("netfilter: nf_tables: adapt set backend to use GC transaction API")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>

Add a brief description to the enum's comment.

Fixes: 837830a4 ("netfilter: nf_tables: add NFTA_RULE_CHAIN_ID attribute")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Florian Westphal <fw@strlen.de>

The opt_num field is controlled by user mode and is not currently
validated inside the kernel. An attacker can take advantage of this to
trigger an OOB read and potentially leak information.

BUG: KASAN: slab-out-of-bounds in nf_osf_match_one+0xbed/0xd10 net/netfilter/nfnetlink_osf.c:88
Read of size 2 at addr ffff88804bc64272 by task poc/6431

CPU: 1 PID: 6431 Comm: poc Not tainted 6.0.0-rc4 #1
Call Trace:
 nf_osf_match_one+0xbed/0xd10 net/netfilter/nfnetlink_osf.c:88
 nf_osf_find+0x186/0x2f0 net/netfilter/nfnetlink_osf.c:281
 nft_osf_eval+0x37f/0x590 net/netfilter/nft_osf.c:47
 expr_call_ops_eval net/netfilter/nf_tables_core.c:214
 nft_do_chain+0x2b0/0x1490 net/netfilter/nf_tables_core.c:264
 nft_do_chain_ipv4+0x17c/0x1f0 net/netfilter/nft_chain_filter.c:23
 [..]

Also add validation to genre, subtype and version fields.

Fixes: 11eeef41 ("netfilter: passive OS fingerprint xtables match")
Reported-by: Lucas Leong <wmliang@infosec.exchange>
Signed-off-by: Wander Lairson Costa <wander@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>

If priv->len is a multiple of 4, then dst[len / 4] can write past
the destination array which leads to stack corruption.

This construct is necessary to clean the remainder of the register
in case ->len is NOT a multiple of the register size, so make it
conditional just like nft_payload.c does.

The bug was added in 4.1 cycle and then copied/inherited when
tcp/sctp and ip option support was added.

Bug reported by Zero Day Initiative project (ZDI-CAN-21950,
ZDI-CAN-21951, ZDI-CAN-21961).

Fixes: 49499c3e ("netfilter: nf_tables: switch registers to 32 bit addressing")
Fixes: 935b7f64 ("netfilter: nft_exthdr: add TCP option matching")
Fixes: 133dc203 ("netfilter: nft_exthdr: Support SCTP chunks")
Fixes: dbb5281a ("netfilter: nf_tables: add support for matching IPv4 options")
Signed-off-by: Florian Westphal <fw@strlen.de>

Pull backlight updates from Lee Jones:
 "New Functionality:

   - Ensure correct includes are present and remove some that are not
     required

   - Drop redundant of_match_ptr() call to cast pointer to NULL

  Bug Fixes:

   - Revert to old (expected) behaviour of initialising PWM state on
     first brightness change

   - Correctly handle / propagate errors

   - Fix 'sometimes-uninitialised' issues"

* tag 'backlight-next-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
  backlight: led_bl: Remove redundant of_match_ptr()
  backlight: lp855x: Drop ret variable in brightness change function
  backlight: gpio_backlight: Drop output GPIO direction check for initial power state
  backlight: lp855x: Catch errors when changing brightness
  backlight: lp855x: Initialize PWM state on first brightness change
  backlight: qcom-wled: Explicitly include correct DT includes