- 25 Apr, 2023 3 commits
-
-
Dave Stevenson authored
Copy Intel's "Broadcast RGB" property semantics to add manual override of the HDMI pixel range for monitors that don't abide by the content of the AVI Infoframe. Signed-off-by:
Dave Stevenson <dave.stevenson@raspberrypi.com> Reviewed-by: Hans Verkuil <hverkuil-cisco at xs4all.nl> Link: https://lore.kernel.org/r/20221207-rpi-hdmi-improvements-v3-3-bdd54f66884e@cerno.techSigned-off-by:
Maxime Ripard <maxime@cerno.tech>
-
Maxime Ripard authored
On VC4, the TV margins on the HDMI connector are implemented by scaling the planes. However, if only the TV margins or the connector are changed by a new state, the planes ending up on that connector won't be. Thus, they won't be updated properly and we'll effectively ignore that change until the next commit affecting these planes. Let's make sure to add all the planes attached to the connector so that we can update them properly. Reviewed-by:
Thomas Zimmermann <tzimmermann@suse.de> Link: https://lore.kernel.org/r/20221207-rpi-hdmi-improvements-v3-2-bdd54f66884e@cerno.techSigned-off-by:
-
Maxime Ripard authored
container_of_const() allows to preserve the pointer constness and is thus more flexible than inline functions. Let's switch all our instances of container_of() to container_of_const(). Reviewed-by:
Javier Martinez Canillas <javierm@redhat.com> Link: https://lore.kernel.org/r/20221207-rpi-hdmi-improvements-v3-1-bdd54f66884e@cerno.techSigned-off-by:
-
- 24 Apr, 2023 11 commits
-
-
Maíra Canal authored
Currently, the pixel conversion functions repeat the same loop to iterate the rows. Instead of repeating the same code for each pixel format, create a function to wrap the loop and isolate the pixel conversion functionality. Suggested-by:
Arthur Grillo <arthurgrillo@riseup.net> Signed-off-by:
Maíra Canal <mcanal@igalia.com> Reviewed-by:
Maíra Canal <mairacanal@riseup.net> Link: https://patchwork.freedesktop.org/patch/msgid/20230418130525.128733-2-mcanal@igalia.com
-
Arthur Grillo authored
Insert a parameterized test for the drm_rect_rotate_inv() to ensure its correctness and prevent future regressions. The test covers all rotation modes. It uses the same test cases from drm_test_rect_rotate(). Signed-off-by:
-
Arthur Grillo authored
Insert a parameterized test for the drm_rect_rotate() to ensure correctness and prevent future regressions. All possible rotation modes are covered by the test. Signed-off-by:
-
Arthur Grillo authored
Insert parameterized test for the drm_rect_calc_vscale() to ensure correctness and prevent future regressions. Besides the test for the usual case, tests the exceptions. It uses the same struct from drm_rect_calc_hscale(). Signed-off-by:
-
Arthur Grillo authored
Insert parameterized test for the drm_rect_calc_hscale() to ensure correctness and prevent future regressions. Besides the test for the usual case, tests the exceptions. Signed-off-by:
-
Arthur Grillo authored
Insert parameterized tests for the drm_rect_intersect() to ensure correctness and prevent future regressions. Also, create a helper for testing if two drm_rects are equal. Signed-off-by:
-
Thomas Zimmermann authored
Backmerging to get the exynos fbdev updates. Signed-off-by: -
Christian König authored
Switch to using RCU handling for the last scheduled job and add a function to return the error code of it. Signed-off-by:
Christian König <christian.koenig@amd.com> Reviewed-by:
Luben Tuikov <luben.tuikov@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230420115752.31470-2-christian.koenig@amd.com
-
Christian König authored
When a hw fence is signaled with an error properly forward that to the finished fence. Signed-off-by:
-
Yang Li authored
Convert platform_get_resource(),devm_ioremap_resource() to a single call to devm_platform_ioremap_resource(), as this is exactly what this function does. Signed-off-by:
Yang Li <yang.lee@linux.alibaba.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230421091319.79744-1-yang.lee@linux.alibaba.com
-
Dave Airlie authored
Merge tag 'exynos-drm-next-for-v6.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next A patch series for implementing fbdev emulation as in-kernel client. - This patch series refactors fbdev callbacks to DRM client functions and simplifies fbdev emulation initialization including some code cleanups. The changes make fbdev emulation behave like a regular DRM client. Signed-off-by:
Dave Airlie <airlied@redhat.com> From: Inki Dae <inki.dae@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230417100624.35229-1-inki.dae@samsung.com
-
- 23 Apr, 2023 1 commit
-
-
Dave Airlie authored
Merge tag 'drm-intel-next-fixes-2023-04-20-1' of git://anongit.freedesktop.org/drm/drm-intel into drm-next Active port PLL MST fix for second stream, CSC plane index fix, null and oob array deref fixes and selftest memory leak fix. Signed-off-by:
-
- 22 Apr, 2023 2 commits
-
-
Maíra Canal authored
This driver includes the deprecated OF GPIO header <linux/of_gpio.h> yet fail to use symbols from it, so drop this include. Cc: Alain Volmat <alain.volmat@foss.st.com> Signed-off-by:
Alain Volmat <avolmat@me.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220812205746.609107-5-mairacanal@riseup.net
-
Maíra Canal authored
This driver includes the deprecated OF GPIO header <linux/of_gpio.h> yet fail to use symbols from it, so drop the include. Cc: Andrzej Hajda <andrzej.hajda@intel.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Robert Foss <robert.foss@linaro.org> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Jonas Karlman <jonas@kwiboo.se> Cc: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by:
Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220812205746.609107-2-mairacanal@riseup.net
-
- 21 Apr, 2023 7 commits
-
-
Rodrigo Siqueira authored
This commit adds missing luminance control registers to enable a more standard way (VESA) to deal with eDP luminance control. Cc: Anthony Koo <anthony.koo@amd.com> Cc: Iswara Negulendran <iswara.nagulendran@amd.com> Cc: Felipe Clark <felipe.clark@amd.com> Cc: Harry Wentland <Harry.Wentland@amd.com> Signed-off-by:
Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Reviewed-by:
Harry Wentland <harry.wentland@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230412000943.429031-1-Rodrigo.Siqueira@amd.com
-
Richard Leitner authored
Add InnoLux G070ACE-L01 7" 800x480 TFT LCD with WLED backlight panel support. Timing data was extracted from datasheet and vendor provided EDID file. Signed-off-by:
Richard Leitner <richard.leitner@skidata.com> Reviewed-by:
Douglas Anderson <dianders@chromium.org> Signed-off-by:
-
Richard Leitner authored
Add Innolux G070ACE-L01 7" WVGA (800x480) TFT LCD panel compatible string. Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by:
-
Thomas Zimmermann authored
Move code from ad-hoc fbdev callbacks into DRM client functions and remove the old callbacks. The functions instruct the client to poll for changed output or restore the display. The DRM core calls both, the old callbacks and the new client helpers, from the same places. The new functions perform the same operation as before, so there's no change in functionality. Replace all code that initializes or releases fbdev emulation throughout the driver. Instead initialize the fbdev client by a single call to armada_fbdev_setup() after armada has registered its DRM device. As in most drivers, aramda's fbdev emulation now acts like a regular DRM client. The fbdev client setup consists of the initial preparation and the hot-plugging of the display. The latter creates the fbdev device and sets up the fbdev framebuffer. The setup performs display hot-plugging once. If no display can be detected, DRM probe helpers re-run the detection on each hotplug event. A call to drm_dev_unregister() releases the client automatically. No further action is required within armada. If the fbdev framebuffer has been fully set up, struct fb_ops.fb_destroy implements the release. For partially initialized emulation, the fbdev client reverts the initial setup. Signed-off-by:
-
Thomas Zimmermann authored
Initialize the fbdev client in the fbdev code with empty helper functions. Also clean up the client. The helpers will later implement various functionality of the DRM client. No functional changes. Signed-off-by:
-
Thomas Zimmermann authored
Only build armada's fbdev emulation if CONFIG_DRM_FBDEV_EMULATION has been enabled. No functional changes, but allows to build armada without fbdev. Signed-off-by:
Sui Jingfeng <suijingfeng@loongson.cn> Link: https://patchwork.freedesktop.org/patch/msgid/20230330073046.7150-3-tzimmermann@suse.de
-
Thomas Zimmermann authored
Include <linux/of.h> to get declarations of of_node_put() and of_device_is_available(). No functional changes. Signed-off-by:
-
- 20 Apr, 2023 16 commits
-
-
Nikita Travkin authored
This bridge doesn't actually implement HPD due to it being way too slow but instead expects the panel driver to wait enough to assume HPD is asserted. However some panels (such as the generic 'edp-panel') expect the bridge to deal with the delay and pass maximum delay to the aux instead. In order to support such panels, add a dummy implementation of wait that would just sleep the maximum delay and assume no failure has happened. Signed-off-by:
Nikita Travkin <nikita@trvn.ru> Reviewed-by:
-
Thomas Zimmermann authored
Include <asm-generic/fb.h> and set the required preprocessor tokens correctly. x86 now implements its own set of fb helpers, but still follows the overall pattern of the other <asm/fb.h> files. v3: * clarified commit message Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Helge Deller <deller@gmx.de> Link: https://patchwork.freedesktop.org/patch/msgid/20230417125651.25126-20-tzimmermann@suse.de
-
Thomas Zimmermann authored
Replace sparc64's fb_pgprotect() with the generic one from <asm-generic/fb.h>. On sparc, pgprot_writecombine() and pgprot_noncached() are the same; hence no functional changes v3: * use default implementation for fb_pgprotect() on sparc64 (Arnd) v2: * restore the original fb_pgprotect() Signed-off-by:
-
Thomas Zimmermann authored
Other architectures implment fb_is_primary_device() in a source file. Do the same on sparc. No functional changes, but allows to remove several include statement from <asm/fb.h>. v2: * don't include <asm/prom.h> in header file Signed-off-by:
-
Thomas Zimmermann authored
Replace the architecture's fbdev helpers with the generic ones from <asm-generic/fb.h>. No functional changes. v2: * use default implementation for fb_pgprotect() (Arnd) Signed-off-by:
John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Acked-by:
-
Thomas Zimmermann authored
Replace the architecture's fb_is_primary_device() with the generic one from <asm-generic/fb.h>. No functional changes. Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Acked-by:
-
Thomas Zimmermann authored
Replace the architecture's fbdev helpers with the generic ones from <asm-generic/fb.h>. On PARISC, pgprot_writecombine() and pgprot_noncached() are the same; hence no functional changes. v3: * use default implementation for fb_pgprotect() (Arnd) Signed-off-by:
-
Thomas Zimmermann authored
Move PARISC's implementation of fb_is_primary_device() into the architecture directory. This the place of the declaration and where other architectures implement this function. No functional changes. Signed-off-by:
-
Thomas Zimmermann authored
Fix trailing whitespaces. No functional changes. Signed-off-by:
-
Thomas Zimmermann authored
STI core files have been located in console and fbdev code. Move the source code and header to the directories for video helpers. Also update the config and build rules such that the code depends on the config symbol CONFIG_STI_CORE, which STI console and STI framebuffer select automatically. Cleans up the console makefile and prepares PARISC to implement fb_is_primary_device() within the arch/ directory. No functional changes. Signed-off-by:
-
Thomas Zimmermann authored
Fix trailing whitespaces. No functional changes. Signed-off-by:
-
Thomas Zimmermann authored
Replace the architecture's fb_is_primary_device() with the generic one from <asm-generic/fb.h>. No functional changes. Signed-off-by:
-
Thomas Zimmermann authored
Replace the architecture's fb_is_primary_device() with the generic one from <asm-generic/fb.h>. No functional changes. v2: * provide empty fb_pgprotect() on non-MMU systems Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Acked-by:
-
Thomas Zimmermann authored
Merge all variants of fb_pgprotect() into a single function body. There are two different cases for MMU systems. For non-MMU systems, the function body will be empty. No functional changes, but this will help with the switch to <asm-generic/fb.h>. Signed-off-by:
-
Thomas Zimmermann authored
Replace the architecture's fbdev helpers with the generic ones from <asm-generic/fb.h>. No functional changes. v2: * use default implementation for fb_pgprotect() (Arnd) Signed-off-by:
-
Thomas Zimmermann authored
Replace the architecture's fb_is_primary_device() with the generic one from <asm-generic/fb.h>. No functional changes. Signed-off-by:
-
