- 19 Jul, 2018 3 commits
-
-
Anusha Srivatsa authored
Add register defines and shifts that control the RC buffer threshold between encoder and decoder for eDP/MIPI and DP cases. The actual values are calculated usung a helper function. This patch adds the shifts to registers where the value will be written during atomic commit. v2: - Use _MMIO_PIPE() instead of _MMIO_(_PICK()) (Manasi) - Combine shifts (Manasi) Cc: Jani Nikula <jani.nikula@intel.com> Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by:
Anusha Srivatsa <anusha.srivatsa@intel.com> Reviewed-by:
Manasi Navare <manasi.d.navare@intel.com> Signed-off-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1531861861-10950-3-git-send-email-anusha.srivatsa@intel.com
-
Anusha Srivatsa authored
Display Stream Compression(DSC) has a set of Picture Parameter Set(PPS) components that the encoder must communicate to the decoder. This patch adds register definitions to the PPS parameters for eDP/MIPI case and Display Port. v2: - Use _MMIO_PIPE instead of _MMIO(_PICK()). (Manasi) - Use DSC constants as arguments. (Manasi) Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by:
-
Anusha Srivatsa authored
The Picture Parameter Set metadata for DSC has to be sent to the panel through secondary data packets. Add the error correction registers, data registers and control registers for the same. The control registers for transcoders A and B are already defined and will be reused for Icelake purpose. This patch adds Control register for EDP and transcoder C apart from adding the PPS data and error registers. v2: reuse MMIO_TRANS2 for _PPS_DATA and _PPS_ECC. The _MMIO_TRANS2(pipe, reg) macro definition takes care of the eDp case Cc: Jani Nikula <jani.nikula@intel.com> Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by:
-
- 18 Jul, 2018 2 commits
-
-
Rodrigo Vivi authored
It was originally introduced following the VESA spec in order to validate PSR. However we found so many issues around sink_crc that instead of helping PSR development it only brought another layer of trouble to the table. So, sink_crc has been a black whole for us in question of time, effort and hope. First of the problems is that HW statement is clear: "Do not attempt to use aux communication with PSR enabled". So the main reason behind sink_crc is already compromised. For a while we had hope on the aux-mutex could workaround this problem on SKL+ platforms, but that mutex was not reliable, not tested, and we shouldn't use according to HW engineers. Also, nor source, nor sink designed and implemented the sink_crc to be used like we are trying to use here. Well, the sink side of things is also apparently not prepared for this case. Each panel that we tried seemed to have a different behavior with same code and same source. So, for all the time we lost on trying to ducktape all these different issues I believe it is now time to move PSR to a more reliable validation. Maybe not a perfect one as we dreamed for this sink_crc, but at least more reliable. Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180705192528.30515-1-rodrigo.vivi@intel.com
-
Chris Wilson authored
If the driver is wedged, we skip idling the GPU. However, we may still have a few requests still not retired following the wedging (since they will be waiting for a background worker trying to acquire struct_mutex). As we hold the struct_mutex, always do a quick request retirement in order to flush the wedged path. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107257Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180717084121.28185-1-chris@chris-wilson.co.uk
-
- 17 Jul, 2018 2 commits
-
-
Chris Wilson authored
Our I915g (early gen3, the oldest machine we have in the farm) is still reporting occasional incoherency performing the following operations: 1) write through GGTT (indirect write into memory) 2) write through either CPU or WC (direct write into memory) 3) read from GGTT (indirect read) Instead of reporting the value from (2), the read from GGTT reports the earlier value written via the GGTT. We have made sure that the writes are flushed from the CPU (commit 3a32497f ("drm/i915/selftests: Provide full mb() around clflush") and commit add00e6d ("drm/i915: Flush the WCB following a WC write")), but still see the error, just less frequently. The only remaining cache that might be affected here is a chipset cache, so flush that as well. Testcase: igt/drv_selftest/live_coherency #gdg Signed-off-by:
-
Chris Wilson authored
In the huge pages tests, we may have lots of objects being trapped on the freelist as we hold the struct_mutex allowing the free worker no opportunity to recover the backing store. We also have stricter requirements and the desire for large contiguous pages, further increasing the allocation pressure. To reduce the chance of running out of memory, we could either drop the mutex and flush the free worker, or we could release the backing store directly. We do the latter in this patch for simplicity. References: https://bugs.freedesktop.org/show_bug.cgi?id=107254Signed-off-by:
Matthew Auld <matthew.william.auld@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180717082334.18774-1-chris@chris-wilson.co.uk
-
- 16 Jul, 2018 6 commits
-
-
Chris Wilson authored
We must be able to reset the GPU while we are waiting on it to perform an eviction (unbinding an active vma). So attach a spinning request to a target vma and try and it evict it from a thread to see if that blocks indefinitely. v2: Add a wait for the thread to start just in case that takes more than 10ms... v3: complete() not completion_done() to signal the completion. Signed-off-by:
-
Chris Wilson authored
Inject a failure into preemption completion to pretend as if the HW didn't successfully handle preemption and we are forced to do a reset in the middle. v2: Wait for preemption, to force testing with the missed preemption. Signed-off-by:
-
Chris Wilson authored
On reset/wedging, we cancel all pending replies from the HW and we also want to cancel an outstanding preemption event. Since we use the same function to cancel the pending replies for reset and for a preemption event, we can simply clear the active tracking for all. v2: Keep execlists_user_end() markup for wedging v3: Move assignment to inline to hide the bare assignment. Fixes: 60a94324 ("drm/i915/execlists: Drop clear_gtiir() on GPU reset") Signed-off-by:
-
Chris Wilson authored
If we declare the driver wedged before the GPU truly is, then we may see the GPU complete some CS events following our cancellation. This leaves us quite confused as we deleted all the bookkeeping and thus complain about the inconsistent state. We can just ignore the remaining events and let the GPU idle by not feeding it, and so avoid trying to racily overwrite shared state. We rely on there being a full GPU reset before unwedging, giving us the opportunity to reset the shared state. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107188Signed-off-by:
-
Chris Wilson authored
On an aborted module load, we unwind and free our device private - but we left a dangling pointer to our privates inside the pci_device. After the attempted aborted unload, we may still get a call to i915_pci_remove() when the module is removed, potentially chasing stale data. Signed-off-by:
-
Chris Wilson authored
Give in, since CI continues to incorrectly insist that KERN_NOTICE is a warning and flags the timeout message as unwanted spam. At first, the intention was to use the message to indicate which tests might warrant an extended run, but virtually all tests require a timeout so it is simply not as interesting as first thought. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103667Signed-off-by:
-
- 14 Jul, 2018 1 commit
-
-
Michał Winiarski authored
We're seeing "RPM wakelock ref not held during HW access" warning otherwise. Since IRQs are synced for runtime suspend we can just disable the wakeref asserts. Reported-by:
Marta Löfstedt <marta.lofstedt@intel.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105710Signed-off-by:
Michał Winiarski <michal.winiarski@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180714173703.7894-1-chris@chris-wilson.co.ukReviewed-by:
-
- 13 Jul, 2018 24 commits
-
-
Chris Wilson authored
With the new CSB processing code, we are not vulnerable to delayed delivery of a pre-reset interrupt as we use the CSB status pointers in the HWSP to decide if we need to parse any CSB events and no longer need to wait for the first post-reset interrupt to be assured that the CSB mmio registers are valid. The new icl code to clear registers has a nasty lock inversion: [ 57.409776] ====================================================== [ 57.409779] WARNING: possible circular locking dependency detected [ 57.409783] 4.18.0-rc4-CI-CI_DII_1137+ #1 Tainted: G U W [ 57.409785] ------------------------------------------------------ [ 57.409788] swapper/6/0 is trying to acquire lock: [ 57.409790] 000000004f304ee5 (&engine->timeline.lock/1){-.-.}, at: execlists_submit_request+0x2b/0x1a0 [i915] [ 57.409841] but task is already holding lock: [ 57.409844] 00000000aad89594 (&(&rq->lock)->rlock#2){-.-.}, at: notify_ring+0x2b2/0x480 [i915] [ 57.409869] which lock already depends on the new lock. [ 57.409872] the existing dependency chain (in reverse order) is: [ 57.409876] -> #2 (&(&rq->lock)->rlock#2){-.-.}: [ 57.409900] notify_ring+0x2b2/0x480 [i915] [ 57.409922] gen8_cs_irq_handler+0x39/0xa0 [i915] [ 57.409943] gen11_irq_handler+0x2f0/0x420 [i915] [ 57.409949] __handle_irq_event_percpu+0x42/0x370 [ 57.409952] handle_irq_event_percpu+0x2b/0x70 [ 57.409956] handle_irq_event+0x2f/0x50 [ 57.409959] handle_edge_irq+0xe7/0x190 [ 57.409964] handle_irq+0x67/0x160 [ 57.409967] do_IRQ+0x5e/0x120 [ 57.409971] ret_from_intr+0x0/0x1d [ 57.409974] _raw_spin_unlock_irqrestore+0x4e/0x60 [ 57.409979] tasklet_action_common.isra.5+0x47/0xb0 [ 57.409982] __do_softirq+0xd9/0x505 [ 57.409985] irq_exit+0xa9/0xc0 [ 57.409988] do_IRQ+0x9a/0x120 [ 57.409991] ret_from_intr+0x0/0x1d [ 57.409995] cpuidle_enter_state+0xac/0x360 [ 57.409999] do_idle+0x1f3/0x250 [ 57.410004] cpu_startup_entry+0x6a/0x70 [ 57.410010] start_secondary+0x19d/0x1f0 [ 57.410015] secondary_startup_64+0xa5/0xb0 [ 57.410018] -> #1 (&(&dev_priv->irq_lock)->rlock){-.-.}: [ 57.410081] clear_gtiir+0x30/0x200 [i915] [ 57.410116] execlists_reset+0x6e/0x2b0 [i915] [ 57.410140] i915_reset_engine+0x111/0x190 [i915] [ 57.410165] i915_handle_error+0x11a/0x4a0 [i915] [ 57.410198] i915_hangcheck_elapsed+0x378/0x530 [i915] [ 57.410204] process_one_work+0x248/0x6c0 [ 57.410207] worker_thread+0x37/0x380 [ 57.410211] kthread+0x119/0x130 [ 57.410215] ret_from_fork+0x3a/0x50 [ 57.410217] -> #0 (&engine->timeline.lock/1){-.-.}: [ 57.410224] _raw_spin_lock_irqsave+0x33/0x50 [ 57.410256] execlists_submit_request+0x2b/0x1a0 [i915] [ 57.410289] submit_notify+0x8d/0x124 [i915] [ 57.410314] __i915_sw_fence_complete+0x81/0x250 [i915] [ 57.410339] dma_i915_sw_fence_wake+0xd/0x20 [i915] [ 57.410344] dma_fence_signal_locked+0x79/0x200 [ 57.410368] notify_ring+0x2ba/0x480 [i915] [ 57.410392] gen8_cs_irq_handler+0x39/0xa0 [i915] [ 57.410416] gen11_irq_handler+0x2f0/0x420 [i915] [ 57.410421] __handle_irq_event_percpu+0x42/0x370 [ 57.410425] handle_irq_event_percpu+0x2b/0x70 [ 57.410428] handle_irq_event+0x2f/0x50 [ 57.410432] handle_edge_irq+0xe7/0x190 [ 57.410436] handle_irq+0x67/0x160 [ 57.410439] do_IRQ+0x5e/0x120 [ 57.410445] ret_from_intr+0x0/0x1d [ 57.410449] cpuidle_enter_state+0xac/0x360 [ 57.410453] do_idle+0x1f3/0x250 [ 57.410456] cpu_startup_entry+0x6a/0x70 [ 57.410460] start_secondary+0x19d/0x1f0 [ 57.410464] secondary_startup_64+0xa5/0xb0 [ 57.410466] other info that might help us debug this: [ 57.410471] Chain exists of: &engine->timeline.lock/1 --> &(&dev_priv->irq_lock)->rlock --> &(&rq->lock)->rlock#2 [ 57.410481] Possible unsafe locking scenario: [ 57.410485] CPU0 CPU1 [ 57.410487] ---- ---- [ 57.410490] lock(&(&rq->lock)->rlock#2); [ 57.410494] lock(&(&dev_priv->irq_lock)->rlock); [ 57.410498] lock(&(&rq->lock)->rlock#2); [ 57.410503] lock(&engine->timeline.lock/1); [ 57.410506] *** DEADLOCK *** [ 57.410511] 4 locks held by swapper/6/0: [ 57.410514] #0: 0000000074575789 (&(&dev_priv->irq_lock)->rlock){-.-.}, at: gen11_irq_handler+0x8a/0x420 [i915] [ 57.410542] #1: 000000009b29b30e (rcu_read_lock){....}, at: notify_ring+0x1a/0x480 [i915] [ 57.410573] #2: 00000000aad89594 (&(&rq->lock)->rlock#2){-.-.}, at: notify_ring+0x2b2/0x480 [i915] [ 57.410601] #3: 000000009b29b30e (rcu_read_lock){....}, at: submit_notify+0x35/0x124 [i915] [ 57.410635] stack backtrace: [ 57.410640] CPU: 6 PID: 0 Comm: swapper/6 Tainted: G U W 4.18.0-rc4-CI-CI_DII_1137+ #1 [ 57.410644] Hardware name: Intel Corporation Ice Lake Client Platform/IceLake U DDR4 SODIMM PD RVP, BIOS ICLSFWR1.R00.2222.A01.1805300339 05/30/2018 [ 57.410650] Call Trace: [ 57.410652] <IRQ> [ 57.410657] dump_stack+0x67/0x9b [ 57.410662] print_circular_bug.isra.16+0x1c8/0x2b0 [ 57.410666] __lock_acquire+0x1897/0x1b50 [ 57.410671] ? lock_acquire+0xa6/0x210 [ 57.410674] lock_acquire+0xa6/0x210 [ 57.410706] ? execlists_submit_request+0x2b/0x1a0 [i915] [ 57.410711] _raw_spin_lock_irqsave+0x33/0x50 [ 57.410741] ? execlists_submit_request+0x2b/0x1a0 [i915] [ 57.410769] execlists_submit_request+0x2b/0x1a0 [i915] [ 57.410774] ? _raw_spin_unlock_irqrestore+0x39/0x60 [ 57.410804] submit_notify+0x8d/0x124 [i915] [ 57.410828] __i915_sw_fence_complete+0x81/0x250 [i915] [ 57.410854] dma_i915_sw_fence_wake+0xd/0x20 [i915] [ 57.410858] dma_fence_signal_locked+0x79/0x200 [ 57.410882] notify_ring+0x2ba/0x480 [i915] [ 57.410907] gen8_cs_irq_handler+0x39/0xa0 [i915] [ 57.410933] gen11_irq_handler+0x2f0/0x420 [i915] [ 57.410938] __handle_irq_event_percpu+0x42/0x370 [ 57.410943] handle_irq_event_percpu+0x2b/0x70 [ 57.410947] handle_irq_event+0x2f/0x50 [ 57.410951] handle_edge_irq+0xe7/0x190 [ 57.410955] handle_irq+0x67/0x160 [ 57.410958] do_IRQ+0x5e/0x120 [ 57.410962] common_interrupt+0xf/0xf [ 57.410965] </IRQ> [ 57.410969] RIP: 0010:cpuidle_enter_state+0xac/0x360 [ 57.410972] Code: 44 00 00 31 ff e8 84 93 91 ff 45 84 f6 74 12 9c 58 f6 c4 02 0f 85 31 02 00 00 31 ff e8 7d 30 98 ff e8 e8 0e 94 ff fb 4c 29 fb <48> ba cf f7 53 e3 a5 9b c4 20 48 89 d8 48 c1 fb 3f 48 f7 ea b8 ff [ 57.411015] RSP: 0018:ffffc90000133e90 EFLAGS: 00000216 ORIG_RAX: ffffffffffffffdd [ 57.411023] RAX: ffff8804ae748040 RBX: 000000000002a97d RCX: 0000000000000000 [ 57.411029] RDX: 0000000000000046 RSI: ffffffff82141263 RDI: ffffffff820f05a7 [ 57.411035] RBP: 0000000000000001 R08: 0000000000000001 R09: 0000000000000000 [ 57.411041] R10: 0000000000000000 R11: 0000000000000000 R12: ffffffff8229f078 [ 57.411045] R13: ffff8804ab2adfa8 R14: 0000000000000000 R15: 0000000d5de092e3 [ 57.411052] do_idle+0x1f3/0x250 [ 57.411055] cpu_startup_entry+0x6a/0x70 [ 57.411059] start_secondary+0x19d/0x1f0 [ 57.411064] secondary_startup_64+0xa5/0xb0 The easiest remedy is to remove the defunct code. Fixes: ff047a87 ("drm/i915/icl: Correctly clear lost ctx-switch interrupts across reset for Gen11") References: fd8526e5 ("drm/i915/execlists: Trust the CSB") Signed-off-by:Michel Thierry <michel.thierry@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180713203529.1973-3-chris@chris-wilson.co.uk
-
Chris Wilson authored
Inside intel_engine_is_idle(), we flush the tasklet to ensure that is being run in a timely fashion (ksoftirqd has taught us to expect the worst). However, if we are in the middle of reset, the HW may not yet be ready to execute the submission tasklet and so we must respect the disable flag. Fixes: dd0cf235 ("drm/i915: Speed up idle detection by kicking the tasklets") Testcase: igt/drv_selftest/live_hangcheck Signed-off-by:
-
Chris Wilson authored
Knowing the boundary of each subtest can be instrumental in digesting the voluminous trace output and finding the critical piece of information. Signed-off-by:
-
Chris Wilson authored
Hopefully the final hack to get guc fault-injection happy before we can clean it up again, starting from a known good baseline... [ 383.017530] BUG: unable to handle kernel NULL pointer dereference at 00000000000000a0 [ 383.017556] Oops: 0000 [#1] PREEMPT SMP PTI [ 383.017566] CPU: 7 PID: 4725 Comm: drv_module_relo Tainted: G U 4.18.0-rc4-CI-CI_DRM_4485+ #1 [ 383.017581] Hardware name: Micro-Star International Co., Ltd. MS-7B54/Z370M MORTAR (MS-7B54), BIOS 1.10 12/28/2017 [ 383.017664] RIP: 0010:guc_stage_desc_pool_destroy+0x17/0xe0 [i915] [ 383.017674] Code: 59 a0 c6 05 02 59 18 00 01 e8 5e 01 c3 e0 eb b1 0f 1f 00 53 48 89 fb 48 81 c7 90 02 00 00 e8 60 64 45 e1 48 8b 83 80 02 00 00 <48> 8b 80 a0 00 00 00 48 8b 90 68 02 00 00 48 83 ea 01 48 81 fa ff [ 383.017771] RSP: 0018:ffffc900004bbdd0 EFLAGS: 00010282 [ 383.017782] RAX: 0000000000000000 RBX: ffff88012ff41300 RCX: 0000000000000000 [ 383.017794] RDX: 0000000000000000 RSI: ffffc900004bbd80 RDI: 0000000000000000 [ 383.017805] RBP: ffff88012ff40000 R08: 00000000d876ee11 R09: 0000000000000000 [ 383.017817] R10: 0000000000000000 R11: 0000000000000000 R12: ffff88012ff47770 [ 383.017828] R13: ffff88012ff40068 R14: ffff880264392ef8 R15: ffffffffa0639950 [ 383.017840] FS: 00007fb9c18c8980(0000) GS:ffff8802663c0000(0000) knlGS:0000000000000000 [ 383.017853] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 383.017864] CR2: 00000000000000a0 CR3: 00000001df6cc003 CR4: 00000000003606e0 [ 383.017875] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 383.017887] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 383.017898] Call Trace: [ 383.017962] intel_uc_fini+0x34/0xd0 [i915] [ 383.018020] i915_gem_fini+0x5c/0x100 [i915] [ 383.018093] i915_driver_unload+0xd2/0x110 [i915] [ 383.018150] i915_pci_remove+0x10/0x20 [i915] [ 383.018165] pci_device_remove+0x36/0xb0 [ 383.018179] device_release_driver_internal+0x185/0x250 [ 383.018193] driver_detach+0x35/0x70 [ 383.018205] bus_remove_driver+0x53/0xd0 [ 383.018217] pci_unregister_driver+0x25/0xa0 [ 383.018232] __se_sys_delete_module+0x162/0x210 [ 383.018245] ? do_syscall_64+0xd/0x190 [ 383.018257] do_syscall_64+0x55/0x190 [ 383.018270] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 383.018282] RIP: 0033:0x7fb9c0f7c1b7 [ 383.018290] Code: 73 01 c3 48 8b 0d d1 8c 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 b8 b0 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d a1 8c 2c 00 f7 d8 64 89 01 48 [ 383.018408] RSP: 002b:00007fffa01c2aa8 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0 [ 383.018425] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fb9c0f7c1b7 [ 383.018440] RDX: 0000000000000000 RSI: 0000000000000800 RDI: 0000560b96856d48 [ 383.018454] RBP: 0000560b96856ce0 R08: 0000560b96856d4c R09: 00007fffa01c2ae8 [ 383.018468] R10: 00007fffa01c1aa4 R11: 0000000000000206 R12: 0000560b954f7470 Testcase: igt/drv_module_reload/basic-reload-inject Signed-off-by:
Michal Wajdeczko <michal.wajdeczko@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180713172658.14070-1-chris@chris-wilson.co.uk
-
Ville Syrjälä authored
We're printing out which pins got a hotplug, so why not also print out which pins detected the long pulse as opposed to a short pulse. Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180705164357.28512-9-ville.syrjala@linux.intel.comReviewed-by:
-
Ville Syrjälä authored
We're doing a pointless translation from hpd_pin to port simply for passing the thing to long_pulse_detect(). Let's pass the hpd_pin directly instead. This removes the assumption that the hpd_pin and port always match. The only other place where we make that assumption anymore is intel_hpd_pin_default() and that's fine as it's what determines the relationship between the two. If we ever get hardware where the hpd pins are wired in more interesting ways it should be trivial to handle from now on. This should also fix the IS_CNL_WITH_PORT_F() case as that mapped pin E back to port F and passed that to spt_port_hotplug2_long_detect() which would always return false for port F. Now that we pass in pin E directly it'll actually do the right thing. Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Fixes: cf53902f ("drm/i915/cnl: Add HPD support for Port F.") Signed-off-by:
-
Ville Syrjälä authored
Use the enum hpd_pin type when talking about HPD pins, and rename the variable from a very nondescript 'i' to 'pin', a name we already use in other parts of the code. Signed-off-by:
-
Ville Syrjälä authored
Instead of looping over ports and hpd_pins, let's loop over the encoders when doing hotplug processing. And instead of depending on dev_priv->irq_port[] to tell us whether the encoder has the ->hpd_pulse() hook or not, we can just check for that directly. So we can just nuke irq_port[] entirely. Signed-off-by:
-
Ville Syrjälä authored
Rather than looping over all the ports and picking the encoder based on the port, let's just loop over all the encoders instead. Gets rid of some irq_port[] usage, which is a bit of an eye sore. Signed-off-by:
-
Ville Syrjälä authored
Add intel_encoder_is_dig_port() to match intel_encoder_is_dp(). Signed-off-by:
-
Ville Syrjälä authored
Add a convenience macro for iterating DP encoders. Signed-off-by:
-
Chris Wilson authored
On gen8 and onwards, we can mark GPU accesses through the ppGTT as being read-only, that is cause any GPU write onto that page to be discarded (not triggering a fault). This is all that we need to finally support the read-only flag for userptr! v2: Check default address space for read only support as a proxy for the user context/ppgtt. Testcase: igt/gem_userptr_blits/readonly* Signed-off-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by:
Jon Bloomfield <jon.bloomfield@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180712191430.9269-1-chris@chris-wilson.co.uk
-
Chris Wilson authored
If the user created a read-only object, they should not be allowed to circumvent the write protection using the pwrite ioctl. Signed-off-by:
-
Chris Wilson authored
If the user has created a read-only object, they should not be allowed to circumvent the write protection by using a GGTT mmapping. Deny it. Also most machines do not support read-only GGTT PTEs, so again we have to reject attempted writes. Fortunately, this is known a priori, so we can at least reject in the call to create the mmap (with a sanity check in the fault handler). v2: Check the vma->vm_flags during mmap() to allow readonly access. v3: Remove VM_MAYWRITE to curtail mprotect() Testcase: igt/gem_userptr_blits/readonly_mmap* Signed-off-by:
-
Chris Wilson authored
GVT is not propagating the PTE bits, and is always setting the read-write bit, thus breaking read-only support. Signed-off-by:
-
Jon Bloomfield authored
Hook up the flags to allow read-only ppGTT mappings for gen8+ v2: Include a selftest to check that writes to a readonly PTE are dropped v3: Don't duplicate cpu_check() as we can just reuse it, and even worse don't wholesale copy the theory-of-operation comment from igt_ctx_exec without changing it to explain the intention behind the new test! v4: Joonas really likes magic mystery values Signed-off-by:
-
Jon Bloomfield authored
We can set a bit inside the ppGTT PTE to indicate a page is read-only; writes from the GPU will be discarded. We can use this to protect pages and in particular support read-only userptr mappings (necessary for importing PROT_READ vma). Signed-off-by:
-
Clint Taylor authored
On GLK NUC platforms the HDMI retiming buffer needs additional disabled time to correctly sync to a faster incoming signal. When measured on a scope the highspeed lines of the HDMI clock turn off for ~400uS during a normal resolution change. The HDMI retimer on the GLK NUC appears to require at least a full frame of quiet time before a new faster clock can be correctly sync'd. Wait 100ms due to msleep inaccuracies while waiting for a completed frame. Add a quirk to the driver for GLK boards that use ITE66317 HDMI retimers. V2: Add more devices to the quirk list V3: Delay increased to 100ms, check to confirm crtc type is HDMI. V4: crtc type check extended to include _DDI and whitespace fixes v5: Fix white spaces, remove the macro for delay. Revert the crtc type check introduced in v4. Cc: Imre Deak <imre.deak@intel.com> Cc: <stable@vger.kernel.org> # v4.14+ Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105887Signed-off-by:Clint Taylor <clinton.a.taylor@intel.com> Tested-by:
Daniel Scheller <d.scheller.oss@gmail.com> Signed-off-by:
Radhakrishna Sripada <radhakrishna.sripada@intel.com> Signed-off-by:
Imre Deak <imre.deak@intel.com> Reviewed-by:
-
Chris Wilson authored
After aborting a module load, we may try and disable guc before we have finished setting it. Long term plan is to ensure perfect onion unwind, but in the short term we want to fix the oops to re-enable drv_module_reload. [ 317.401239] BUG: unable to handle kernel NULL pointer dereference at 0000000000000030 [ 317.401279] Oops: 0000 [#1] PREEMPT SMP PTI [ 317.401294] CPU: 5 PID: 4275 Comm: drv_module_relo Tainted: G U 4.18.0-rc4-CI-CI_DRM_4476+ #1 [ 317.401317] Hardware name: System manufacturer System Product Name/Z170M-PLUS, BIOS 3610 03/29/2018 [ 317.401440] RIP: 0010:unreserve_doorbell+0x0/0x80 [i915] [ 317.401454] Code: bb e0 48 8b 35 21 4d 18 00 49 c7 c0 a8 e5 62 a0 b9 cc 00 00 00 48 c7 c2 d8 41 5f a0 48 c7 c7 c9 f6 53 a0 e8 a2 3d c2 e0 0f 0b <0f> b7 47 30 66 3d 00 01 74 20 48 8b 57 18 48 0f a3 82 40 05 00 00 [ 317.401602] RSP: 0018:ffffc900003d3da0 EFLAGS: 00010246 [ 317.401619] RAX: ffffffff8223b300 RBX: 0000000000000000 RCX: 0000000000000000 [ 317.401636] RDX: 0000001fffffffc0 RSI: ffff880219f115f0 RDI: 0000000000000000 [ 317.401654] RBP: ffff880219f11838 R08: 0000000000000000 R09: 0000000000000000 [ 317.401671] R10: 0000000000000000 R11: 0000000000000000 R12: ffff880219f11300 [ 317.401689] R13: ffff880219f17770 R14: ffff88022c1daef8 R15: ffffffffa06ae950 [ 317.401707] FS: 00007febf77a9980(0000) GS:ffff880236d40000(0000) knlGS:0000000000000000 [ 317.401727] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 317.401743] CR2: 0000000000000030 CR3: 0000000222072003 CR4: 00000000003606e0 [ 317.401761] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 317.401779] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 317.401796] Call Trace: [ 317.401894] guc_client_free+0x9/0x130 [i915] [ 317.401993] intel_guc_submission_fini+0x50/0x90 [i915] [ 317.402092] intel_uc_fini+0x34/0xd0 [i915] [ 317.402179] i915_gem_fini+0x5c/0x100 [i915] [ 317.402249] i915_driver_unload+0xd2/0x110 [i915] [ 317.402321] i915_pci_remove+0x10/0x20 [i915] [ 317.402341] pci_device_remove+0x36/0xb0 [ 317.402357] device_release_driver_internal+0x185/0x250 [ 317.402374] driver_detach+0x35/0x70 [ 317.402390] bus_remove_driver+0x53/0xd0 [ 317.402404] pci_unregister_driver+0x25/0xa0 [ 317.402423] __se_sys_delete_module+0x162/0x210 [ 317.402439] ? do_syscall_64+0xd/0x190 [ 317.402454] do_syscall_64+0x55/0x190 [ 317.402470] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 317.402485] RIP: 0033:0x7febf6e5d1b7 [ 317.402496] Code: 73 01 c3 48 8b 0d d1 8c 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 b8 b0 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d a1 8c 2c 00 f7 d8 64 89 01 48 [ 317.402646] RSP: 002b:00007fffb5e72798 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0 [ 317.402667] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007febf6e5d1b7 [ 317.402686] RDX: 0000000000000000 RSI: 0000000000000800 RDI: 0000562da1addd98 [ 317.402703] RBP: 0000562da1addd30 R08: 0000562da1addd9c R09: 00007fffb5e727d8 [ 317.402721] R10: 00007fffb5e71794 R11: 0000000000000206 R12: 0000562da0ff6470 Testcase: igt/drv_module_reload/basic-reload-inject Signed-off-by:
-
Rodrigo Vivi authored
Signed-off-by: -
Rodrigo Vivi authored
Reduce the module parameter to enable or disable. The link stand by vs full link off was used only once. And it was actually masking another bug fixed by commit '84bb2916 ("drm/i915/psr: Check for SET_POWER_CAPABLE bit at PSR init time.")' So, let's remove these options for now. End goal is to fully remove the mod param, moving it to a debugfs interface in upcoming patches. Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Cc: Tarun Vyas <tarun.vyas@intel.com> Signed-off-by:
-
Rodrigo Vivi authored
PSR is no longer supported on VLV/CHV so this is just dead code. Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Signed-off-by:
José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180711220050.21809-1-rodrigo.vivi@intel.com
-
Dhinakaran Pandiyan authored
This allows to read i915_edp_psr_status from tests without triggering any AUX communication. Take this opportunity to move this under the eDP-1 connector directory as the status we print is of the sink. Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: José Roberto de Souza <jose.souza@intel.com> Suggested-by:
-
Tarun Vyas authored
In commit "drm/i915: Wait for PSR exit before checking for vblank evasion", the idea was to limit the PSR IDLE checks when PSR is actually supported. While CAN_PSR does do that check, it doesn't applies on a per-crtc basis. crtc_state->has_psr is a more granular check that only applies to pipe(s) that have PSR enabled. Without the has_psr check, we end up waiting on the eDP transcoder's PSR_STATUS register irrespective of whether the pipe being updated is driving it or not. v2: Remove unnecessary parantheses, make checkpatch happy. v3: Move the has_psr check to intel_psr_wait_for_idle and commit message changes (DK). v4: Derive dev_priv from intel_crtc_state (DK) v5: Commit message changes to reflect the HW behavior (DK) Fixes: a6089879 ("drm/i915: Wait for PSR exit before checking for vblank evasion") Reviewed-by:Tarun Vyas <tarun.vyas@intel.com> Signed-off-by:
-
- 12 Jul, 2018 2 commits
-
-
Ramalingam C authored
Support for Burst read in HW is added for HDCP2.2 compliance requirement. This patch enables the burst read for all the gmbus read of more than 511Bytes, on capable platforms. v2: Extra line is removed. v3: Macro is added for detecting the BURST_READ Support [Jani] Runtime detection of the need for burst_read [Jani] Calculation enhancement. v4: GMBUS0 reg val is passed from caller [ville] Removed a extra var [ville] Extra brackets are removed [ville] Implemented the handling of 512Bytes Burst Read. v5: Burst read max length is fixed at 767Bytes [Ville] v6: Collecting the received reviewed-by. Signed-off-by:
Ramalingam C <ramalingam.c@intel.com> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/1530192889-5789-3-git-send-email-ramalingam.c@intel.com
-
Ramalingam C authored
GMBUS HW supports 511Bytes as Max Bytes per single RD/WR op. Instead of enabling the 511Bytes per RD/WR cycle on legacy platforms for no absolute ROIs, this change allows the max bytes per op upto 511Bytes from Gen9 onwards. v2: No Change. v3: Inline function for max_xfer_size and renaming of the macro.[Jani] v4: Extra brackets removed [ville] Commit msg is modified. v5: Collecting the Reviewed-By received. Cc: Jani Nikula <jani.nikula@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
