Pull rdma updates from Jason Gunthorpe:
 "This contains a replacement driver for Intel iWarp hardware. This new
  driver supports the old ethernet hardware and also newer chips that
  can do ROCE.

  Other than that, this contains the typical mix of patches:

   - Driver updates and cleanups for bnxt_re, cxgb4, mlx4, and mlx5

   - Many static checker driven code clean ups, including a wide
     refcount_t conversion

   - Several series for the hns driver, more HIP09 HW capabilities,
     migration to new HW register manipulators, and code cleanups

   - Minor fixes and improvements in srp, rts, and cm

   - Improvements throughout for sysfs related code to use
     DEVICE_ATTR_*, make the ib_port sysfs first-class, and overall use
     sysfs APIs properly

   - Intel's new irdma driver replacing i40iw

   - rxe general clean ups and Memory Window support"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (211 commits)
  RDMA/core: Always release restrack object
  RDMA/mlx5: Don't access NULL-cleared mpi pointer
  RDMA/irdma: Fix potential overflow expression in irdma_prm_get_pbles
  RDMA/irdma: Check contents of user-space irdma_mem_reg_req object
  RDMA/rxe: Missing unlock on error in get_srq_wqe()
  RDMA/cma: Fix rdma_resolve_route() memory leak
  RDMA/core/sa_query: Remove unused argument
  RDMA/cma: Fix incorrect Packet Lifetime calculation
  RDMA/cma: Protect RMW with qp_mutex
  RDMA/cma: Remove unnecessary INIT->INIT transition
  RDMA/hns: Add window selection field of congestion control
  RDMA/hfi1: Remove use of kmap()
  RDMA/irdma: Remove use of kmap()
  RDMA/bnxt_re: Fix uninitialized struct bit field rsvd1
  IB/isert: Align target max I/O size to initiator size
  RDMA/hns: Fix incorrect vlan enable bit in QPC
  MAINTAINERS: Update Broadcom RDMA maintainers
  RDMA/irdma: Use the queried port attributes
  RDMA/rxe: Fix redundant skb_put_zero
  RDMA/rxe: Fix extra copy in prepare_ack_packet
  ...

Pull clk updates from Stephen Boyd:
 "This round has a diffstat dominated by Qualcomm clk drivers. Honestly
  though that's just a bunch of data so the diffstat reflects that.
  Looking beyond that there's just a bunch of updates all around in
  various clk drivers. Renesas and NXP (for i.MX) are two SoC vendors
  that have a lot of patches in here.

  Overall the driver changes look to be mostly enabling more clks and
  non-critical fixes that we could hold until the next merge window.

  I'm especially excited about the series from Arnd that graduates
  clkdev to be the only implementation of clk_get() and clk_put().
  That's a good step in the right direction to migreate eveerything over
  to the common clk framework. Now we don't have to worry about clkdev
  specific details, they're just part of the clk API now.

  Core:
   - clkdev is now the only option, i.e. clk_get()/clk_put() is
     implemented in only one place in the kernel instead of in
     drivers/clk/clkdev.c and in architectures that want their own
     implementation

  New Drivers:
   - Texas Instruments' LMK04832 Ultra Low-Noise JESD204B Compliant
     Clock Jitter Cleaner With Dual Loop PLLs
   - Qualcomm MDM9607 GCC
   - Qualcomm SC8180X display clks
   - Qualcomm SM6125 GCC
   - Qualcomm SM8250 CAMCC (camera)
   - Renesas RZ/G2L SoC
   - Hisilicon hi3559A SoC

  Updates:
   - Stop using clock-output-names in ST clk drivers (yay!)
   - Support secure mode of STM32MP1 SoCs
   - Improve clock support for Actions S500 SoC
   - duty cycle setting support on qcom clks
   - Add TI am33xx spread spectrum clock support
   - Use determine_rate() for the Amlogic pll ops instead of
     round_rate()
   - Restrict Amlogic gp0/1 and audio plls range on g12a/sm1
   - Improve Amlogic axg-audio controller error on deferral
   - Add NNA clocks on Amlogic g12a
   - Reduce memory footprint of Rockchip PLL rate tables
   - A fix for the newly added Rockchip rk3568 clk driver
   - Exported clock for the newly added Rockchip video decoder
   - Remove audio ipg clock from i.MX8MP
   - Remove deprecated legacy clock binding for i.MX SCU clock driver
   - Use common clk-imx8qxp for both i.MX8QXP and i.MX8QM
   - Add multiple clocks to clk-imx8qxp driver (enet, hdmi, lcdif,
     audio, parallel interface)
   - Add dedicated clock ops for i.MX paralel interface
   - Different fixes for clocks controlled by ATF on i.MX SoCs
   - Add A53/A72 frequency scaling support i.MX clk-scu driver
   - Add special case for DCSS clock on suspend for i.MX clk-scu driver
   - Add parent save/restore on suspend/resume to i.MX clk-scu driver
   - Skip runtime PM enablement for CPU clocks in i.MX clk-scu driver
   - Remove the sys1_pll/sys2_pll clock gates for i.MX8MQ and their
     bindings
   - Tegra clk driver no longer deasserts resets on clk_enable as it
     gets in the way of certain power-up sequences
   - Fix compile testing for Tegra clk driver
   - One patch to fix a divider on the Allwinner v3s Audio PLL
   - Add support for CPU core clock boost modes on Renesas R-Car Gen3
   - Add ISPCS (Image Signal Processor) clocks on Renesas R-Car V3U
   - Switch SH/R-Mobile and R-Car "DIV6" clocks to .determine_rate() and
     improve support for multiple parents
   - Switch Renesas RZ/N1 divider clocks to .determine_rate()
   - Add ZA2 (Audio Clock Generator) clock on Renesas R-Car D3
   - Convert ar7 to common clk framework
   - Convert ralink to common clk framework"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (161 commits)
  clk: zynqmp: Handle divider specific read only flag
  clk: zynqmp: Use firmware specific mux clock flags
  clk: zynqmp: Use firmware specific divider clock flags
  clk: zynqmp: Use firmware specific common clock flags
  clk: lmk04832: Use of match table
  clk: lmk04832: Depend on SPI
  clk: stm32mp1: new compatible for secure RCC support
  dt-bindings: clock: stm32mp1 new compatible for secure rcc
  dt-bindings: reset: add MCU HOLD BOOT ID for SCMI reset domains on stm32mp15
  dt-bindings: reset: add IDs for SCMI reset domains on stm32mp15
  dt-bindings: clock: add IDs for SCMI clocks on stm32mp15
  reset: stm32mp1: remove stm32mp1 reset
  clk: hisilicon: Add clock driver for hi3559A SoC
  dt-bindings: Document the hi3559a clock bindings
  clk: si5341: Add sysfs properties to allow checking/resetting device faults
  clk: si5341: Add silabs,iovdd-33 property
  clk: si5341: Add silabs,xaxb-ext-clk property
  clk: si5341: Allow different output VDD_SEL values
  clk: si5341: Update initialization magic
  clk: si5341: Check for input clock presence and PLL lock on startup
  ...

Pull drm updates from Dave Airlie:
 "Highlights:

   - AMD enables two more GPUs, with resulting header files

   - i915 has started to move to TTM for discrete GPU and enable DG1
     discrete GPU support (not by default yet)

   - new HyperV drm driver

   - vmwgfx adds arm64 support

   - TTM refactoring ongoing

   - 16bpc display support for AMD hw

  Otherwise it's just the usual insane amounts of work all over the
  place in lots of drivers and the core, as mostly summarised below:

  Core:
   - mark AGP ioctls as legacy
   - disable force probing for non-master clients
   - HDR metadata property helpers
   - HDMI infoframe signal colorimetry support
   - remove drm_device.pdev pointer
   - remove DRM_KMS_FB_HELPER config option
   - remove drm_pci_alloc/free
   - drm_err_*/drm_dbg_* helpers
   - use drm driver names for fbdev
   - leaked DMA handle fix
   - 16bpc fixed point format fourcc
   - add prefetching memcpy for WC
   - Documentation fixes

  aperture:
   - add aperture ownership helpers

  dp:
   - aux fixes
   - downstream 0 port handling
   - use extended base receiver capability DPCD
   - Rename DP_PSR_SELECTIVE_UPDATE to better mach eDP spec
   - mst: use khz as link rate during init
   - VCPI fixes for StarTech hub

  ttm:
   - provide tt_shrink file via debugfs
   - warn about freeing pinned BOs
   - fix swapping error handling
   - move page alignment into BO
   - cleanup ttm_agp_backend
   - add ttm_sys_manager
   - don't override vm_ops
   - ttm_bo_mmap removed
   - make ttm_resource base of all managers
   - remove VM_MIXEDMAP usage

  panel:
   - sysfs_emit support
   - simple: runtime PM support
   - simple: power up panel when reading EDID + caching

  bridge:
   - MHDP8546: HDCP support + DT bindings
   - MHDP8546: Register DP AUX channel with userspace
   - TI SN65DSI83 + SN65DSI84: add driver
   - Sil8620: Fix module dependencies
   - dw-hdmi: make CEC driver loading optional
   - Ti-sn65dsi86: refclk fixes, subdrivers, runtime pm
   - It66121: Add driver + DT bindings
   - Adv7511: Support I2S IEC958 encoding
   - Anx7625: fix power-on delay
   - Nwi-dsi: Modesetting fixes; Cleanups
   - lt6911: add missing MODULE_DEVICE_TABLE
   - cdns: fix PM reference leak

  hyperv:
   - add new DRM driver for HyperV graphics

  efifb:
   - non-PCI device handling fixes

  i915:
   - refactor IP/device versioning
   - XeLPD Display IP preperation work
   - ADL-P enablement patches
   - DG1 uAPI behind BROKEN
   - disable mmap ioctl for discerte GPUs
   - start enabling HuC loading for Gen12+
   - major GuC backend rework for new platforms
   - initial TTM support for Discrete GPUs
   - locking rework for TTM prep
   - use correct max source link rate for eDP
   - %p4cc format printing
   - GLK display fixes
   - VLV DSI panel power fixes
   - PSR2 disabled for RKL and ADL-S
   - ACPI _DSM invalid access fixed
   - DMC FW path abstraction
   - ADL-S PCI ID update
   - uAPI headers converted to kerneldoc
   - initial LMEM support for DG1
   - x86/gpu: add Jasperlake to gen11 early quirks

  amdgpu:
   - Aldebaran updates + initial SR-IOV
   - new GPU: Beige Goby and Yellow Carp support
   - more LTTPR display work
   - Vangogh updates
   - SDMA 5.x GCR fixes
   - PCIe ASPM support
   - Renoir TMZ enablement
   - initial multiple eDP panel support
   - use fdinfo to track devices/process info
   - pin/unpin TTM fixes
   - free resource on fence usage query
   - fix fence calculation
   - fix hotunplug/suspend issues
   - GC/MM register access macro cleanup for SR-IOV
   - W=1 fixes
   - ACPI ATCS/ATIF handling rework
   - 16bpc fixed point format support
   - Initial smartshift support
   - RV/PCO power tuning fixes
   - new INFO query for additional vbios info

  amdkfd:
   - SR-IOV aldebaran support
   - HMM SVM support

  radeon:
   - SMU regression fixes
   - Oland flickering fix

  vmwgfx:
   - enable console with fbdev emulation
   - fix cpu updates of coherent multisample surfaces
   - remove reservation semaphore
   - add initial SVGA3 support
   - support arm64

  msm:
   - devcoredump support for display errors
   - dpu/dsi: yaml bindings conversion
   - mdp5: alpha/blend_mode/zpos support
   - a6xx: cached coherent buffer support
   - gpu iova fault improvement
   - a660 support

  rockchip:
   - RK3036 win1 scaling support
   - RK3066/3188 missing register support
   - RK3036/3066/3126/3188 alpha support

  mediatek:
   - MT8167 HDMI support
   - MT8183 DPI dual edge support

  tegra:
   - fixed YUV support/scaling on Tegra186+

  ast:
   - use pcim_iomap
   - fix DP501 EDID

  bochs:
   - screen blanking support

  etnaviv:
   - export more GPU ID values to userspace
   - add HWDB entry for GPU on i.MX8MP
   - rework linear window calcs

  exynos:
   - pm runtime changes

  imx:
   - Annotate dma_fence critical section
   - fix PRG modifiers after drmm conversion
   - Add 8 pixel alignment fix for 1366x768
   - fix YUV advertising
   - add color properties

  ingenic:
   - IPU planes fix

  panfrost:
   - Mediatek MT8183 support + DT bindings
   - export AFBC_FEATURES register to userspace

  simpledrm:
   - %pr for printing resources

  nouveau:
   - pin/unpin TTM fixes

  qxl:
   - unpin shadow BO

  virtio:
   - create dumb BOs as guest blob

  vkms:
   - drmm_universal_plane_alloc
   - add XRGB plane composition
   - overlay support"

* tag 'drm-next-2021-07-01' of git://anongit.freedesktop.org/drm/drm: (1570 commits)
  drm/i915: Reinstate the mmap ioctl for some platforms
  drm/i915/dsc: abstract helpers to get bigjoiner primary/secondary crtc
  Revert "drm/msm/mdp5: provide dynamic bandwidth management"
  drm/msm/mdp5: provide dynamic bandwidth management
  drm/msm/mdp5: add perf blocks for holding fudge factors
  drm/msm/mdp5: switch to standard zpos property
  drm/msm/mdp5: add support for alpha/blend_mode properties
  drm/msm/mdp5: use drm_plane_state for pixel blend mode
  drm/msm/mdp5: use drm_plane_state for storing alpha value
  drm/msm/mdp5: use drm atomic helpers to handle base drm plane state
  drm/msm/dsi: do not enable PHYs when called for the slave DSI interface
  drm/msm: Add debugfs to trigger shrinker
  drm/msm/dpu: Avoid ABBA deadlock between IRQ modules
  drm/msm: devcoredump iommu fault support
  iommu/arm-smmu-qcom: Add stall support
  drm/msm: Improve the a6xx page fault handler
  iommu/arm-smmu-qcom: Add an adreno-smmu-priv callback to get pagefault info
  iommu/arm-smmu: Add support for driver IOMMU fault handlers
  drm/msm: export hangcheck_period in debugfs
  drm/msm/a6xx: add support for Adreno 660 GPU
  ...

Pull io_uring updates from Jens Axboe:

 - Multi-queue iopoll improvement (Fam)

 - Allow configurable io-wq CPU masks (me)

 - renameat/linkat tightening (me)

 - poll re-arm improvement (Olivier)

 - SQPOLL race fix (Olivier)

 - Cancelation unification (Pavel)

 - SQPOLL cleanups (Pavel)

 - Enable file backed buffers for shmem/memfd (Pavel)

 - A ton of cleanups and performance improvements (Pavel)

 - Followup and misc fixes (Colin, Fam, Hao, Olivier)

* tag 'for-5.14/io_uring-2021-06-30' of git://git.kernel.dk/linux-block: (83 commits)
  io_uring: code clean for kiocb_done()
  io_uring: spin in iopoll() only when reqs are in a single queue
  io_uring: pre-initialise some of req fields
  io_uring: refactor io_submit_flush_completions
  io_uring: optimise hot path restricted checks
  io_uring: remove not needed PF_EXITING check
  io_uring: mainstream sqpoll task_work running
  io_uring: refactor io_arm_poll_handler()
  io_uring: reduce latency by reissueing the operation
  io_uring: add IOPOLL and reserved field checks to IORING_OP_UNLINKAT
  io_uring: add IOPOLL and reserved field checks to IORING_OP_RENAMEAT
  io_uring: refactor io_openat2()
  io_uring: simplify struct io_uring_sqe layout
  io_uring: update sqe layout build checks
  io_uring: fix code style problems
  io_uring: refactor io_sq_thread()
  io_uring: don't change sqpoll creds if not needed
  io_uring: Create define to modify a SQPOLL parameter
  io_uring: Fix race condition when sqp thread goes to sleep
  io_uring: improve in tctx_task_work() resubmission
  ...

Pull misc fs updates from Jan Kara:
 "The new quotactl_fd() syscall (remake of quotactl_path() syscall that
  got introduced & disabled in 5.13 cycle), and couple of udf, reiserfs,
  isofs, and writeback fixes and cleanups"

* tag 'fs_for_v5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  writeback: fix obtain a reference to a freeing memcg css
  quota: remove unnecessary oom message
  isofs: remove redundant continue statement
  quota: Wire up quotactl_fd syscall
  quota: Change quotactl_path() systcall to an fd-based one
  reiserfs: Remove unneed check in reiserfs_write_full_page()
  udf: Fix NULL pointer dereference in udf_symlink function
  reiserfs: add check for invalid 1st journal block

Pull ext4 updates from Ted Ts'o:
 "In addition to bug fixes and cleanups, there are two new features for
  ext4 in 5.14:

   - Allow applications to poll on changes to
     /sys/fs/ext4/*/errors_count

   - Add the ioctl EXT4_IOC_CHECKPOINT which allows the journal to be
     checkpointed, truncated and discarded or zero'ed"

* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (32 commits)
  jbd2: export jbd2_journal_[un]register_shrinker()
  ext4: notify sysfs on errors_count value change
  fs: remove bdev_try_to_free_page callback
  ext4: remove bdev_try_to_free_page() callback
  jbd2: simplify journal_clean_one_cp_list()
  jbd2,ext4: add a shrinker to release checkpointed buffers
  jbd2: remove redundant buffer io error checks
  jbd2: don't abort the journal when freeing buffers
  jbd2: ensure abort the journal if detect IO error when writing original buffer back
  jbd2: remove the out label in __jbd2_journal_remove_checkpoint()
  ext4: no need to verify new add extent block
  jbd2: clean up misleading comments for jbd2_fc_release_bufs
  ext4: add check to prevent attempting to resize an fs with sparse_super2
  ext4: consolidate checks for resize of bigalloc into ext4_resize_begin
  ext4: remove duplicate definition of ext4_xattr_ibody_inline_set()
  ext4: fsmap: fix the block/inode bitmap comment
  ext4: fix comment for s_hash_unsigned
  ext4: use local variable ei instead of EXT4_I() macro
  ext4: fix avefreec in find_group_orlov
  ext4: correct the cache_nr in tracepoint ext4_es_shrink_exit
  ...

Merge tag 'for-5.14/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm

Pull device mapper updates from Mike Snitzer:

 - Various DM persistent-data library improvements and fixes that
   benefit both the DM thinp and cache targets.

 - A few small DM kcopyd efficiency improvements.

 - Significant zoned related block core, DM core and DM zoned target
   changes that culminate with adding zoned append emulation (which is
   required to properly fix DM crypt's zoned support).

 - Various DM writecache target changes that improve efficiency. Adds an
   optional "metadata_only" feature that only promotes bios flagged with
   REQ_META. But the most significant improvement is writecache's
   ability to pause writeback, for a confiurable time, if/when the
   working set is larger than the cache (and the cache is full) -- this
   ensures performance is no worse than the slower origin device.

* tag 'for-5.14/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (35 commits)
  dm writecache: make writeback pause configurable
  dm writecache: pause writeback if cache full and origin being written directly
  dm io tracker: factor out IO tracker
  dm btree remove: assign new_root only when removal succeeds
  dm zone: fix dm_revalidate_zones() memory allocation
  dm ps io affinity: remove redundant continue statement
  dm writecache: add optional "metadata_only" parameter
  dm writecache: add "cleaner" and "max_age" to Documentation
  dm writecache: write at least 4k when committing
  dm writecache: flush origin device when writing and cache is full
  dm writecache: have ssd writeback wait if the kcopyd workqueue is busy
  dm writecache: use list_move instead of list_del/list_add in writecache_writeback()
  dm writecache: commit just one block, not a full page
  dm writecache: remove unused gfp_t argument from wc_add_block()
  dm crypt: Fix zoned block device support
  dm: introduce zone append emulation
  dm: rearrange core declarations for extended use from dm-zone.c
  block: introduce BIO_ZONE_WRITE_LOCKED bio flag
  block: introduce bio zone helpers
  block: improve handling of all zones reset operation
  ...

Pull networking updates from Jakub Kicinski:
 "Core:

   - BPF:
      - add syscall program type and libbpf support for generating
        instructions and bindings for in-kernel BPF loaders (BPF loaders
        for BPF), this is a stepping stone for signed BPF programs
      - infrastructure to migrate TCP child sockets from one listener to
        another in the same reuseport group/map to improve flexibility
        of service hand-off/restart
      - add broadcast support to XDP redirect

   - allow bypass of the lockless qdisc to improving performance (for
     pktgen: +23% with one thread, +44% with 2 threads)

   - add a simpler version of "DO_ONCE()" which does not require jump
     labels, intended for slow-path usage

   - virtio/vsock: introduce SOCK_SEQPACKET support

   - add getsocketopt to retrieve netns cookie

   - ip: treat lowest address of a IPv4 subnet as ordinary unicast
     address allowing reclaiming of precious IPv4 addresses

   - ipv6: use prandom_u32() for ID generation

   - ip: add support for more flexible field selection for hashing
     across multi-path routes (w/ offload to mlxsw)

   - icmp: add support for extended RFC 8335 PROBE (ping)

   - seg6: add support for SRv6 End.DT46 behavior

   - mptcp:
      - DSS checksum support (RFC 8684) to detect middlebox meddling
      - support Connection-time 'C' flag
      - time stamping support

   - sctp: packetization Layer Path MTU Discovery (RFC 8899)

   - xfrm: speed up state addition with seq set

   - WiFi:
      - hidden AP discovery on 6 GHz and other HE 6 GHz improvements
      - aggregation handling improvements for some drivers
      - minstrel improvements for no-ack frames
      - deferred rate control for TXQs to improve reaction times
      - switch from round robin to virtual time-based airtime scheduler

   - add trace points:
      - tcp checksum errors
      - openvswitch - action execution, upcalls
      - socket errors via sk_error_report

  Device APIs:

   - devlink: add rate API for hierarchical control of max egress rate
     of virtual devices (VFs, SFs etc.)

   - don't require RCU read lock to be held around BPF hooks in NAPI
     context

   - page_pool: generic buffer recycling

  New hardware/drivers:

   - mobile:
      - iosm: PCIe Driver for Intel M.2 Modem
      - support for Qualcomm MSM8998 (ipa)

   - WiFi: Qualcomm QCN9074 and WCN6855 PCI devices

   - sparx5: Microchip SparX-5 family of Enterprise Ethernet switches

   - Mellanox BlueField Gigabit Ethernet (control NIC of the DPU)

   - NXP SJA1110 Automotive Ethernet 10-port switch

   - Qualcomm QCA8327 switch support (qca8k)

   - Mikrotik 10/25G NIC (atl1c)

  Driver changes:

   - ACPI support for some MDIO, MAC and PHY devices from Marvell and
     NXP (our first foray into MAC/PHY description via ACPI)

   - HW timestamping (PTP) support: bnxt_en, ice, sja1105, hns3, tja11xx

   - Mellanox/Nvidia NIC (mlx5)
      - NIC VF offload of L2 bridging
      - support IRQ distribution to Sub-functions

   - Marvell (prestera):
      - add flower and match all
      - devlink trap
      - link aggregation

   - Netronome (nfp): connection tracking offload

   - Intel 1GE (igc): add AF_XDP support

   - Marvell DPU (octeontx2): ingress ratelimit offload

   - Google vNIC (gve): new ring/descriptor format support

   - Qualcomm mobile (rmnet & ipa): inline checksum offload support

   - MediaTek WiFi (mt76)
      - mt7915 MSI support
      - mt7915 Tx status reporting
      - mt7915 thermal sensors support
      - mt7921 decapsulation offload
      - mt7921 enable runtime pm and deep sleep

   - Realtek WiFi (rtw88)
      - beacon filter support
      - Tx antenna path diversity support
      - firmware crash information via devcoredump

   - Qualcomm WiFi (wcn36xx)
      - Wake-on-WLAN support with magic packets and GTK rekeying

   - Micrel PHY (ksz886x/ksz8081): add cable test support"

* tag 'net-next-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2168 commits)
  tcp: change ICSK_CA_PRIV_SIZE definition
  tcp_yeah: check struct yeah size at compile time
  gve: DQO: Fix off by one in gve_rx_dqo()
  stmmac: intel: set PCI_D3hot in suspend
  stmmac: intel: Enable PHY WOL option in EHL
  net: stmmac: option to enable PHY WOL with PMT enabled
  net: say "local" instead of "static" addresses in ndo_dflt_fdb_{add,del}
  net: use netdev_info in ndo_dflt_fdb_{add,del}
  ptp: Set lookup cookie when creating a PTP PPS source.
  net: sock: add trace for socket errors
  net: sock: introduce sk_error_report
  net: dsa: replay the local bridge FDB entries pointing to the bridge dev too
  net: dsa: ensure during dsa_fdb_offload_notify that dev_hold and dev_put are on the same dev
  net: dsa: include fdb entries pointing to bridge in the host fdb list
  net: dsa: include bridge addresses which are local in the host fdb list
  net: dsa: sync static FDB entries on foreign interfaces to hardware
  net: dsa: install the host MDB and FDB entries in the master's RX filter
  net: dsa: reference count the FDB addresses at the cross-chip notifier level
  net: dsa: introduce a separate cross-chip notifier type for host FDBs
  net: dsa: reference count the MDB entries at the cross-chip notifier level
  ...

Pull scheduler fixes from Ingo Molnar:

 - Fix a small inconsistency (bug) in load tracking, caught by a new
   warning that several people reported.

 - Flip CONFIG_SCHED_CORE to default-disabled, and update the Kconfig
   help text.

* tag 'sched-urgent-2021-06-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/core: Disable CONFIG_SCHED_CORE by default
  sched/fair: Ensure _sum and _avg values stay consistent

Pull microblaze updates from Michal Simek:

 - Remove unused PAGE_UP/DOWN macros

 - Fix trivial spelling mistake

* tag 'microblaze-v5.14' of git://git.monstr.eu/linux-2.6-microblaze:
  arch: microblaze: Fix spelling mistake "vesion" -> "version"
  microblaze: Cleanup unused functions

Pull SafeSetID update from Micah Morton:
 "One very minor code cleanup change that marks a variable as
  __initdata"

* tag 'safesetid-5.14' of git://github.com/micah-morton/linux:
  LSM: SafeSetID: Mark safesetid_initialized as __initdata

Pull smack updates from Casey Schaufler:
 "There is nothing more significant than an improvement to a byte count
  check in smackfs.

  All changes have been in next for weeks"

* tag 'Smack-for-5.14' of git://github.com/cschaufler/smack-next:
  Smack: fix doc warning
  Revert "Smack: Handle io_uring kernel thread privileges"
  smackfs: restrict bytes count in smk_set_cipso()
  security/smack/: fix misspellings using codespell tool

Pull audit updates from Paul Moore:
 "Another merge window, another small audit pull request.

  Four patches in total: one is cosmetic, one removes an unnecessary
  initialization, one renames some enum values to prevent name
  collisions, and one converts list_del()/list_add() to list_move().

  None of these are earth shattering and all pass the audit-testsuite
  tests while merging cleanly on top of your tree from earlier today"

* tag 'audit-pr-20210629' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
  audit: remove unnecessary 'ret' initialization
  audit: remove trailing spaces and tabs
  audit: Use list_move instead of list_del/list_add
  audit: Rename enum audit_state constants to avoid AUDIT_DISABLED redefinition
  audit: add blank line after variable declarations

Pull SELinux updates from Paul Moore:

 - The slow_avc_audit() function is now non-blocking so we can remove
   the AVC_NONBLOCKING tricks; this also includes the 'flags' variant of
   avc_has_perm().

 - Use kmemdup() instead of kcalloc()+copy when copying parts of the
   SELinux policydb.

 - The InfiniBand device name is now passed by reference when possible
   in the SELinux code, removing a strncpy().

 - Minor cleanups including: constification of avtab function args,
   removal of useless LSM/XFRM function args, SELinux kdoc fixes, and
   removal of redundant assignments.

* tag 'selinux-pr-20210629' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
  selinux: kill 'flags' argument in avc_has_perm_flags() and avc_audit()
  selinux: slow_avc_audit has become non-blocking
  selinux: Fix kernel-doc
  selinux: use __GFP_NOWARN with GFP_NOWAIT in the AVC
  lsm_audit,selinux: pass IB device name by reference
  selinux: Remove redundant assignment to rc
  selinux: Corrected comment to match kernel-doc comment
  selinux: delete selinux_xfrm_policy_lookup() useless argument
  selinux: constify some avtab function arguments
  selinux: simplify duplicate_policydb_cond_list() by using kmemdup()

Pull clang feature updates from Kees Cook:

 - Add CC_HAS_NO_PROFILE_FN_ATTR in preparation for PGO support in the
   face of the noinstr attribute, paving the way for PGO and fixing
   GCOV. (Nick Desaulniers)

 - x86_64 LTO coverage is expanded to 32-bit x86. (Nathan Chancellor)

 - Small fixes to CFI. (Mark Rutland, Nathan Chancellor)

* tag 'clang-features-v5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  qemu_fw_cfg: Make fw_cfg_rev_attr a proper kobj_attribute
  Kconfig: Introduce ARCH_WANTS_NO_INSTR and CC_HAS_NO_PROFILE_FN_ATTR
  compiler_attributes.h: cleanups for GCC 4.9+
  compiler_attributes.h: define __no_profile, add to noinstr
  x86, lto: Enable Clang LTO for 32-bit as well
  CFI: Move function_nocfi() into compiler.h
  MAINTAINERS: Add Clang CFI section

A simple code clean for kiocb_done()
Signed-off-by: Hao Xu <haoxu@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

We currently spin in iopoll() when requests to be iopolled are for
same file(device), while one device may have multiple hardware queues.
given an example:

hw_queue_0     |    hw_queue_1
req(30us)           req(10us)

If we first spin on iopolling for the hw_queue_0. the avg latency would
be (30us + 30us) / 2 = 30us. While if we do round robin, the avg
latency would be (30us + 10us) / 2 = 20us since we reap the request in
hw_queue_1 in time. So it's better to do spinning only when requests
are in same hardware queue.
Signed-off-by: Hao Xu <haoxu@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Most of requests are allocated from an internal cache, so it's waste of
time fully initialising them every time. Instead, let's pre-init some of
the fields we can during initial allocation (e.g. kmalloc(), see
io_alloc_req()) and keep them valid on request recycling. There are four
of them in this patch:

->ctx is always stays the same
->link is NULL on free, it's an invariant
->result is not even needed to init, just a precaution
->async_data we now clean in io_dismantle_req() as it's likely to
   never be allocated.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/892ba0e71309bba9fe9e0142472330bbf9d8f05d.1624739600.git.asml.silence@gmail.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

Don't init req_batch before we actually need it. Also, add a small clean
up for req declaration.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/ad85512e12bd3a20d521e9782750300970e5afc8.1624739600.git.asml.silence@gmail.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

Move likely/unlikely from io_check_restriction() to specifically
ctx->restricted check, because doesn't do what it supposed to and make
the common path take an extra jump.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/22bf70d0a543dfc935d7276bdc73081784e30698.1624739600.git.asml.silence@gmail.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

Since cancellation got moved before exit_signals(), there is no one left
who can call io_run_task_work() with PF_EXIING set, so remove the check.
Note that __io_req_task_submit() still needs a similar check.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/f7f305ececb1e6044ea649fb983ca754805bb884.1624739600.git.asml.silence@gmail.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

task_works are widely used, so place io_run_task_work() directly into
the main path of io_sq_thread(), and remove it from other places where
it's not needed anymore.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/24eb5e35d519c590d3dffbd694b4c61a5fe49029.1624739600.git.asml.silence@gmail.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

gcc 11 goes a weird path and duplicates most of io_arm_poll_handler()
for READ and WRITE cases. Help it and move all pollin vs pollout
specific bits under a single if-else, so there is no temptation for this
kind of unfolding.

before vs after:
   text    data     bss     dec     hex filename
  85362   12650       8   98020   17ee4 ./fs/io_uring.o
  85186   12650       8   97844   17e34 ./fs/io_uring.o
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/1deea0037293a922a0358e2958384b2e42437885.1624739600.git.asml.silence@gmail.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

It is quite frequent that when an operation fails and returns EAGAIN,
the data becomes available between that failure and the call to
vfs_poll() done by io_arm_poll_handler().

Detecting the situation and reissuing the operation is much faster
than going ahead and push the operation to the io-wq.

Performance improvement testing has been performed with:
Single thread, 1 TCP connection receiving a 5 Mbps stream, no sqpoll.

4 measurements have been taken:
1. The time it takes to process a read request when data is already available
2. The time it takes to process by calling twice io_issue_sqe() after vfs_poll() indicated that data was available
3. The time it takes to execute io_queue_async_work()
4. The time it takes to complete a read request asynchronously

2.25% of all the read operations did use the new path.

ready data (baseline)
avg	3657.94182918628
min	580
max	20098
stddev	1213.15975908162

reissue	completion
average	7882.67567567568
min	2316
max	28811
stddev	1982.79172973284

insert io-wq time
average	8983.82276995305
min	3324
max	87816
stddev	2551.60056552038

async time completion
average	24670.4758861127
min	10758
max	102612
stddev	3483.92416873804

Conclusion:
On average reissuing the sqe with the patch code is 1.1uSec faster and
in the worse case scenario 59uSec faster than placing the request on
io-wq

On average completion time by reissuing the sqe with the patch code is
16.79uSec faster and in the worse case scenario 73.8uSec faster than
async completion.
Signed-off-by: Olivier Langlois <olivier@trillion01.com>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/9e8441419bb1b8f3c3fcc607b2713efecdef2136.1624364038.git.olivier@trillion01.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

We can't support IOPOLL with non-pollable request types, and we should
check for unused/reserved fields like we do for other request types.

Fixes: 14a1143b ("io_uring: add support for IORING_OP_UNLINKAT")
Cc: stable@vger.kernel.org
Reported-by: Dmitry Kadashev <dkadashev@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

We can't support IOPOLL with non-pollable request types, and we should
check for unused/reserved fields like we do for other request types.

Fixes: 80a261fd ("io_uring: add support for IORING_OP_RENAMEAT")
Cc: stable@vger.kernel.org
Reported-by: Dmitry Kadashev <dkadashev@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Put do_filp_open() fail path of io_openat2() under a single if,
deduplicating put_unused_fd(), making it look better and helping
the hot path.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/f4c84d25c049d0af2adc19c703bbfef607200209.1624543113.git.asml.silence@gmail.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

Flatten struct io_uring_sqe, the last union is exactly 64B, so move them
out of union { struct { ... }}, and decrease __pad2 size.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/2e21ef7aed136293d654450bc3088973a8adc730.1624543113.git.asml.silence@gmail.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

Add missing BUILD_BUG_SQE_ELEM() for ->buf_group verifying that SQE
layout doesn't change.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/1f9d21bd74599b856b3a632be4c23ffa184a3ef0.1624543113.git.asml.silence@gmail.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

Fix a bunch of problems mostly found by checkpatch.pl
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/cfaf9a2f27b43934144fe9422a916bd327099f44.1624543113.git.asml.silence@gmail.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

Move needs_sched declaration into the block where it's used, so it's
harder to misuse/wrongfully reuse.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/e4a07db1353ee38b924dd1b45394cf8e746130b4.1624543113.git.asml.silence@gmail.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

SQPOLL doesn't need to change creds if it's not submitting requests.
Move creds overriding into __io_sq_thread() after checking if there are
SQEs pending.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/c54368da2357ac539e0a333f7cfff70d5fb045b2.1624543113.git.asml.silence@gmail.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

Pull block driver updates from Jens Axboe:
 "Pretty calm round, mostly just NVMe and a bit of MD:

   - NVMe updates (via Christoph)
        - improve the APST configuration algorithm (Alexey Bogoslavsky)
        - look for StorageD3Enable on companion ACPI device
          (Mario Limonciello)
        - allow selecting the network interface for TCP connections
          (Martin Belanger)
        - misc cleanups (Amit Engel, Chaitanya Kulkarni, Colin Ian King,
          Christoph)
        - move the ACPI StorageD3 code to drivers/acpi/ and add quirks
          for certain AMD CPUs (Mario Limonciello)
        - zoned device support for nvmet (Chaitanya Kulkarni)
        - fix the rules for changing the serial number in nvmet
          (Noam Gottlieb)
        - various small fixes and cleanups (Dan Carpenter, JK Kim,
          Chaitanya Kulkarni, Hannes Reinecke, Wesley Sheng, Geert
          Uytterhoeven, Daniel Wagner)

   - MD updates (Via Song)
        - iostats rewrite (Guoqing Jiang)
        - raid5 lock contention optimization (Gal Ofri)

   - Fall through warning fix (Gustavo)

   - Misc fixes (Gustavo, Jiapeng)"

* tag 'for-5.14/drivers-2021-06-29' of git://git.kernel.dk/linux-block: (78 commits)
  nvmet: use NVMET_MAX_NAMESPACES to set nn value
  loop: Fix missing discard support when using LOOP_CONFIGURE
  nvme.h: add missing nvme_lba_range_type endianness annotations
  nvme: remove zeroout memset call for struct
  nvme-pci: remove zeroout memset call for struct
  nvmet: remove zeroout memset call for struct
  nvmet: add ZBD over ZNS backend support
  nvmet: add Command Set Identifier support
  nvmet: add nvmet_req_bio put helper for backends
  nvmet: add req cns error complete helper
  block: export blk_next_bio()
  nvmet: remove local variable
  nvmet: use nvme status value directly
  nvmet: use u32 type for the local variable nsid
  nvmet: use u32 for nvmet_subsys max_nsid
  nvmet: use req->cmd directly in file-ns fast path
  nvmet: use req->cmd directly in bdev-ns fast path
  nvmet: make ver stable once connection established
  nvmet: allow mn change if subsys not discovered
  nvmet: make sn stable once connection was established
  ...

Pull core block updates from Jens Axboe:

 - disk events cleanup (Christoph)

 - gendisk and request queue allocation simplifications (Christoph)

 - bdev_disk_changed cleanups (Christoph)

 - IO priority improvements (Bart)

 - Chained bio completion trace fix (Edward)

 - blk-wbt fixes (Jan)

 - blk-wbt enable/disable fix (Zhang)

 - Scheduler dispatch improvements (Jan, Ming)

 - Shared tagset scheduler improvements (John)

 - BFQ updates (Paolo, Luca, Pietro)

 - BFQ lock inversion fix (Jan)

 - Documentation improvements (Kir)

 - CLONE_IO block cgroup fix (Tejun)

 - Remove of ancient and deprecated block dump feature (zhangyi)

 - Discard merge fix (Ming)

 - Misc fixes or followup fixes (Colin, Damien, Dan, Long, Max, Thomas,
   Yang)

* tag 'for-5.14/block-2021-06-29' of git://git.kernel.dk/linux-block: (129 commits)
  block: fix discard request merge
  block/mq-deadline: Remove a WARN_ON_ONCE() call
  blk-mq: update hctx->dispatch_busy in case of real scheduler
  blk: Fix lock inversion between ioc lock and bfqd lock
  bfq: Remove merged request already in bfq_requests_merged()
  block: pass a gendisk to bdev_disk_changed
  block: move bdev_disk_changed
  block: add the events* attributes to disk_attrs
  block: move the disk events code to a separate file
  block: fix trace completion for chained bio
  block/partitions/msdos: Fix typo inidicator -> indicator
  block, bfq: reset waker pointer with shared queues
  block, bfq: check waker only for queues with no in-flight I/O
  block, bfq: avoid delayed merge of async queues
  block, bfq: boost throughput by extending queue-merging times
  block, bfq: consider also creation time in delayed stable merge
  block, bfq: fix delayed stable merge check
  block, bfq: let also stably merged queues enjoy weight raising
  blk-wbt: make sure throttle is enabled properly
  blk-wbt: introduce a new disable state to prevent false positive by rwb_enabled()
  ...

Pull HID updates from Jiri Kosina:

 - patch series that ensures that hid-multitouch driver disables touch
   and button-press reporting on hid-mt devices during suspend when the
   device is not configured as a wakeup-source, from Hans de Goede

 - support for ISH DMA on Intel EHL platform, from Even Xu

 - support for Renoir and Cezanne SoCs, Ambient Light Sensor and Human
   Presence Detection sensor for amd-sfh driver, from Basavaraj Natikar

 - other assorted code cleanups and device-specific fixes/quirks

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (45 commits)
  HID: thrustmaster: Switch to kmemdup() when allocate change_request
  HID: multitouch: Disable event reporting on suspend when the device is not a wakeup-source
  HID: logitech-dj: Implement may_wakeup ll-driver callback
  HID: usbhid: Implement may_wakeup ll-driver callback
  HID: core: Add hid_hw_may_wakeup() function
  HID: input: Add support for Programmable Buttons
  HID: wacom: Correct base usage for capacitive ExpressKey status bits
  HID: amd_sfh: Add initial support for HPD sensor
  HID: amd_sfh: Extend ALS support for newer AMD platform
  HID: amd_sfh: Extend driver capabilities for multi-generation support
  HID: surface-hid: Fix get-report request
  HID: sony: fix freeze when inserting ghlive ps3/wii dongles
  HID: usbkbd: Avoid GFP_ATOMIC when GFP_KERNEL is possible
  HID: amd_sfh: change in maintainer
  HID: intel-ish-hid: ipc: Specify that EHL no cache snooping
  HID: intel-ish-hid: ishtp: Add dma_no_cache_snooping() callback
  HID: intel-ish-hid: Set ISH driver depends on x86
  HID: hid-input: add Surface Go battery quirk
  HID: intel-ish-hid: Fix minor typos in comments
  HID: usbmouse: Avoid GFP_ATOMIC when GFP_KERNEL is possible
  ...

Pull EDAC updates from Tony Luck:
 "Various fixes and support for new CPUs:

   - Clean up error messages from thunderx_edac

   - Add MODULE_DEVICE_TABLE to ti_edac so it will autoload

   - Use %pR to print resources in aspeed_edac

   - Add Yazen Ghannam as MAINTAINER for AMD edac drivers

   - Fix Ice Lake and Sapphire Rapids drivers to report correct "near"
     or "far" device for errors in 2LM configurations

   - Add support of on package high bandwidth memory in Sapphire Rapids

   - New CPU support for three CPUs supporting in-band ECC (IOT SKUs for
     ICL-NNPI, Tiger Lake and Alder Lake)

   - Don't even try to load Intel EDAC drivers when running as a guest

   - Fix Kconfig dependency on X86_MCE_INTEL for EDAC_IGEN6"

* tag 'edac_updates_for_v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
  EDAC/igen6: fix core dependency
  EDAC/Intel: Do not load EDAC driver when running as a guest
  EDAC/igen6: Add Intel Alder Lake SoC support
  EDAC/igen6: Add Intel Tiger Lake SoC support
  EDAC/igen6: Add Intel ICL-NNPI SoC support
  EDAC/i10nm: Add support for high bandwidth memory
  EDAC/i10nm: Add detection of memory levels for ICX/SPR servers
  EDAC/skx_common: Add new ADXL components for 2-level memory
  MAINTAINERS: Make Yazen Ghannam maintainer for EDAC-AMD64
  EDAC/aspeed: Use proper format string for printing resource
  EDAC/ti: Add missing MODULE_DEVICE_TABLE
  EDAC/thunderx: Remove irrelevant variable from error messages

Merge tag 'tpmdd-next-v5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd

Pull tpm driver updates from Jarkko Sakkinen:
 "Bug fixes for TPM"

[ This isn't actually the whole contents of the tag and thus doesn't
  contain Jarkko's signature - I dropped the two top commits that added
  support for signing modules using elliptic curve keys because there's
  a new series for that that fixes a few confising things   - Linus ]

* tag 'tpmdd-next-v5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
  tpm: Replace WARN_ONCE() with dev_err_once() in tpm_tis_status()
  tpm_tis: Use DEFINE_RES_MEM() to simplify code
  tpm: fix some doc warnings in tpm1-cmd.c
  tpm_tis_spi: add missing SPI device ID entries
  tpm: add longer timeout for TPM2_CC_VERIFY_SIGNATURE
  char: tpm: move to use request_irq by IRQF_NO_AUTOEN flag
  tpm_tis_spi: set default probe function if device id not match
  tpm_crb: Use IOMEM_ERR_PTR when function returns iomem

Merge tag 'platform-drivers-x86-v5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86

Pull x86 platform driver updates from Hans de Goede:
 "Highlights:

   - New think-lmi driver adding support for changing Lenovo Thinkpad
     BIOS settings from within Linux using the standard firmware-
     attributes class sysfs API

   - MS Surface aggregator-cdev now also supports forwarding events to
     user-space (for debugging / new driver development purposes only)

   - New intel_skl_int3472 driver this provides the necessary glue to
     translate ACPI table information to GPIOs, regulators, etc. for
     camera sensors on Intel devices with IPU3 attached MIPI cameras

   - A whole bunch of other fixes + device-specific quirk additions

   - New devm_work_autocancel() devm-helpers.h function"

* tag 'platform-drivers-x86-v5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (83 commits)
  platform/x86: dell-wmi-sysman: Change user experience when Admin/System Password is modified
  platform/x86: intel_skl_int3472: Uninitialized variable in skl_int3472_handle_gpio_resources()
  platform/x86: think-lmi: Move kfree(setting->possible_values) to tlmi_attr_setting_release()
  platform/x86: think-lmi: Split current_value to reflect only the value
  platform/x86: think-lmi: Fix issues with duplicate attributes
  platform/x86: think-lmi: Return EINVAL when kbdlang gets set to a 0 length string
  platform/x86: intel_cht_int33fe: Move to its own subfolder
  platform/x86: intel_skl_int3472: Move to intel/ subfolder
  platform/x86: intel_skl_int3472: Provide skl_int3472_unregister_clock()
  platform/x86: intel_skl_int3472: Provide skl_int3472_unregister_regulator()
  platform/x86: intel_skl_int3472: Use ACPI GPIO resource directly
  platform/x86: intel_skl_int3472: Fix dependencies (drop CLKDEV_LOOKUP)
  platform/x86: intel_skl_int3472: Free ACPI device resources after use
  platform/x86: Remove "default n" entries
  platform/x86: ISST: Use numa node id for cpu pci dev mapping
  platform/x86: ISST: Optimize CPU to PCI device mapping
  tools/power/x86/intel-speed-select: v1.10 release
  tools/power/x86/intel-speed-select: Fix uncore memory frequency display
  extcon: extcon-max8997: Simplify driver using devm
  extcon: extcon-max8997: Fix IRQ freeing at error path
  ...

Pull mailbox updates from Jassi Brar:

 - imx: add support for i.MX8ULP

 - mtk: code change around callback struct

 - qcom: add sm6125, MSM8939 fix for channel exhaustion

 - microchip: add support for polarfire controller

 - misc: cosmetic changes to bcm-2835,flexrm,pdc, arm-mhu and hisilicon

* tag 'mailbox-v5.14' of git://git.linaro.org/landing-teams/working/fujitsu/integration: (26 commits)
  MAINTAINERS: add entry for polarfire soc mailbox
  dt-bindings: add bindings for polarfire soc system controller
  mbox: add polarfire soc system controller mailbox
  dt-bindings: add bindings for polarfire soc mailbox
  mailbox: imx: Avoid using val uninitialized in imx_mu_isr()
  mailbox: qcom: Add MSM8939 APCS support
  mailbox: qcom: Use PLATFORM_DEVID_AUTO to register platform device
  dt-bindings: mailbox: qcom: Add MSM8939 APCS compatible
  mailbox: qcom-apcs: Add SM6125 compatible
  dt-bindings: mailbox: Add binding for sm6125
  mailbox: mtk-cmdq: Fix uninitialized variable in cmdq_mbox_flush()
  mailbox: bcm-flexrm-mailbox: Remove redundant dev_err call in flexrm_mbox_probe()
  mailbox: bcm2835: Remove redundant dev_err call in bcm2835_mbox_probe()
  mailbox: qcom-ipcc: Fix IPCC mbox channel exhaustion
  mailbox: mtk-cmdq: Add struct cmdq_pkt in struct cmdq_cb_data
  mailbox: mtk-cmdq: Use mailbox rx_callback
  mailbox: mtk-cmdq: Remove cmdq_cb_status
  mailbox: imx-mailbox: support i.MX8ULP MU
  mailbox: imx: add xSR/xCR register array
  mailbox: imx: replace the xTR/xRR array with single register
  ...

Pull IPMI driver updates from Corey Minyard:
 "Mostly a restructure of the kcs_bmc driver to make it easier to use
  with different types of devices, and just to clean things up and
  improve things.

  Also some bug fixes for the kcs_bmc driver.

  One fix to the IPMI watchdog to stop the timer when the action is
  none. Not a big deal, but it's the right thing to do"

* tag 'for-linus-5.14-1' of git://github.com/cminyard/linux-ipmi:
  ipmi: kcs_bmc_aspeed: Fix less than zero comparison of a unsigned int
  ipmi: kcs_bmc_aspeed: Optionally apply status address
  ipmi: kcs_bmc_aspeed: Fix IBFIE typo from datasheet
  ipmi: kcs_bmc_aspeed: Implement KCS SerIRQ configuration
  dt-bindings: ipmi: Add optional SerIRQ property to ASPEED KCS devices
  dt-bindings: ipmi: Convert ASPEED KCS binding to schema
  ipmi: kcs_bmc: Add serio adaptor
  ipmi: kcs_bmc: Enable IBF on open
  ipmi: kcs_bmc: Allow clients to control KCS IRQ state
  ipmi: kcs_bmc: Decouple the IPMI chardev from the core
  ipmi: kcs_bmc: Strip private client data from struct kcs_bmc
  ipmi: kcs_bmc: Split headers into device and client
  ipmi: kcs_bmc: Turn the driver data-structures inside-out
  ipmi: kcs_bmc: Split out kcs_bmc_cdev_ipmi
  ipmi: kcs_bmc: Rename {read,write}_{status,data}() functions
  ipmi: kcs_bmc: Make status update atomic
  ipmi: kcs_bmc_aspeed: Use of match data to extract KCS properties
  ipmi/watchdog: Stop watchdog timer when the current action is 'none'