Instead of relying on the vendor specific implementations to send the
PME_Turn_Off message, introduce a generic way of sending the message using
the MSG TLP.

This is achieved by reserving a region for MSG TLP of size
'pci->region_align', at the end of the first IORESOURCE_MEM window of the
host bridge. And then sending the PME_Turn_Off message during system
suspend with the help of iATU.

The reason for reserving the MSG TLP region at the end of the
IORESOURCE_MEM is to avoid generating holes in between, because when the
region is allocated using allocate_resource(), memory will be allocated
from the start of the window. Later, if memory gets allocated for an
endpoint of size bigger than 'region_align', there will be a hole between
MSG TLP region and endpoint memory.

This generic implementation is optional for the glue drivers and can be
overridden by a custom 'pme_turn_off' callback.

Link: https://lore.kernel.org/linux-pci/20240418-pme_msg-v8-5-a54265c39742@nxp.comSigned-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

Add PCIE_MSG_CODE_PME_TURN_OFF macros to enable a PCIe host driver to send
PME_Turn_Off messages.

Link: https://lore.kernel.org/linux-pci/20240418-pme_msg-v8-4-a54265c39742@nxp.comSigned-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

Add "Message Routing" and "INTx Mechanism Messages" macros to enable
a PCIe driver to send messages for INTx Interrupt Signaling.

Values from PCIe r6.1, sec 2.2.8 and 2.2.8.1.

Link: https://lore.kernel.org/linux-pci/20240418-pme_msg-v8-1-a54265c39742@nxp.comSigned-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>

Add "code" and "routing" into struct dw_pcie_ob_atu_cfg for triggering
INTx IRQs by iATU in the PCIe endpoint mode in near the future.
PCIE_ATU_INHIBIT_PAYLOAD is set to issue TLP type of Msg instead of
MsgD. This implementation supports the data-less messages only for now.

Link: https://lore.kernel.org/linux-pci/20240418-pme_msg-v8-3-a54265c39742@nxp.comSigned-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>

This is a preparation before adding the Msg-type outbound iATU
mapping. The respective update will require two more arguments added
to __dw_pcie_prog_outbound_atu(). That will make the already
complicated function prototype even more hard to comprehend accepting
_eight_ arguments.

To prevent that and keep the code more-or-less readable, move all the
outbound iATU-related arguments to a new config structure: struct
dw_pcie_ob_atu_cfg, and pass a pointer to dw_pcie_prog_outbound_atu(). The
structure should be locally defined and populated with the outbound iATU
settings implied by the caller context.

As a result of this change there is no longer need in having the two
distinctive methods for the Host and Endpoint outbound iATU setups since
the code can directly call the dw_pcie_prog_outbound_atu() method with the
config structure populated, so drop dw_pcie_prog_ep_outbound_atu().

[kwilczynski: commit log]
Link: https://lore.kernel.org/linux-pci/20240418-pme_msg-v8-2-a54265c39742@nxp.comSigned-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>

When PERST# assert and deassert happens on the PERST# supported platforms,
both iATU0 and iATU6 will map inbound window to BAR0. DMA will access the
area that was previously allocated (iATU0) for BAR0, instead of the new
area (iATU6) for BAR0.

Right now, this isn't an issue because both iATU0 and iATU6 should
translate inbound accesses to BAR0 to the same allocated memory area.
However, having two separate inbound mappings for the same BAR is a
disaster waiting to happen.

The mappings between PCI BAR and iATU inbound window are maintained in the
dw_pcie_ep::bar_to_atu[] array. While allocating a new inbound iATU map for
a BAR, dw_pcie_ep_inbound_atu() API checks for the availability of the
existing mapping in the array and if it is not found (i.e., value in the
array indexed by the BAR is found to be 0), it allocates a new map value
using find_first_zero_bit().

The issue is the existing logic failed to consider the fact that the map
value '0' is a valid value for BAR0, so find_first_zero_bit() will return
'0' as the map value for BAR0 (note that it returns the first zero bit
position).

Due to this, when PERST# assert + deassert happens on the PERST# supported
platforms, the inbound window allocation restarts from BAR0 and the
existing logic to find the BAR mapping will return '6' for BAR0 instead of
'0' due to the fact that it considers '0' as an invalid map value.

Fix this issue by always incrementing the map value before assigning to
bar_to_atu[] array and then decrementing it while fetching. This will make
sure that the map value '0' always represents the invalid mapping."

Fixes: 4284c88f ("PCI: designware-ep: Allow pci_epc_set_bar() update inbound map address")
Closes: https://lore.kernel.org/linux-pci/ZXsRp+Lzg3x%2Fnhk3@x1-carbon/
Link: https://lore.kernel.org/linux-pci/20240412160841.925927-1-Frank.Li@nxp.comReported-by: Niklas Cassel <Niklas.Cassel@wdc.com>
Tested-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>

According to [1], msleep should be used for large sleeps, such as the
100-ish ms one in this function. Comply with the guide and use it.

[1] https://docs.kernel.org/timers/timers-howto.html

[kwilczynski: commit log]
Link: https://lore.kernel.org/linux-pci/20240215-topic-pci_sleep-v2-1-79334884546b@linaro.orgSigned-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

With commit 5779dd0a ("PCI: endpoint: Use notification chain mechanism
to notify EPC events to EPF") the linkup callback has been removed and
replaced by EPC event notifications.

With commit 256ae475 ("PCI: endpoint: Add pci_epf_ops to expose
function-specific attrs") a new (optional) add_cfs callback was added.
Update documentation accordingly.

Link: https://lore.kernel.org/linux-pci/20240418084924.1724703-1-alexander.stein@ew.tq-group.comSigned-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

These two functions are defined in the pci_endpoint_test.c file, but not
called elsewhere, so delete these unused functions.

This fixes the following warning:

  drivers/misc/pci_endpoint_test.c:144:19: warning: unused function 'pci_endpoint_test_bar_readl'.
  drivers/misc/pci_endpoint_test.c:150:20: warning: unused function 'pci_endpoint_test_bar_writel'.

No functional changes intended.

[kwilczynski: commit log]
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=9064
Link: https://lore.kernel.org/linux-pci/20240704023227.87039-1-jiapeng.chong@linux.alibaba.comReported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Add a comment suggesting that if the endpoint controller Vendor and Device
ID are programmable, an existing entry might be usable for testing without
having to add an entry to pci_endpoint_test_tbl[].

Link: https://lore.kernel.org/linux-pci/20240611125057.1232873-6-yoshihiro.shimoda.uh@renesas.comSigned-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>

dma_set_mask_and_coherent() should never fail when the mask is >= 32bit,
unless the architecture has no DMA support. So no need to check for the
error and also no need to set dma_set_mask_and_coherent(32) as a fallback.

Even if dma_set_mask_and_coherent(48) fails due to the lack of DMA support
(theoretically), then dma_set_mask_and_coherent(32) will also fail for the
same reason. So the fallback doesn't make sense.

Simplify the code by setting the streaming and coherent DMA mask to 48
bits.

Link: https://lore.kernel.org/linux-pci/20240502195903.3191049-1-Frank.Li@nxp.comSigned-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>

The current code uses writel()/readl(), which has an implicit memory
barrier for every single readl()/writel().

Additionally, reading 4 bytes at a time over the PCI bus is not really
optimal, considering that this code is running in an ioctl handler.

Use memcpy_toio()/memcpy_fromio() for BAR tests.

Before patch with a 4MB BAR:

  $ time /usr/bin/pcitest -b 1
  BAR1:           OKAY
  real    0m 1.56s

After patch with a 4MB BAR:

  $ time /usr/bin/pcitest -b 1
  BAR1:           OKAY
  real    0m 0.54s

Link: https://lore.kernel.org/linux-pci/20240322164139.678228-1-cassel@kernel.orgSigned-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>

Rockchip rk3588 requires 64KB alignment for BARs.

While there is an existing device_id:vendor_id in the driver with 64KB
alignment, that device_id:vendor_id is am654, which uses BAR2 instead of
BAR0 as the test_reg_bar, and also has special is_am654_pci_dev() checks
in the driver to disallow BAR0. In order to allow testing all BARs, add a
new rk3588 entry in the driver.

We intentionally do not add the vendor id to pci_ids.h, since the policy
for that file is that the vendor id has to be used by multiple drivers.

Hopefully, this new entry will be short-lived, as there is a series on the
mailing list which intends to move the address alignment restrictions from
this driver to the endpoint side.

Add a new entry for rk3588 in order to allow us to test all BARs.

Link: https://lore.kernel.org/linux-pci/20240607-rockchip-pcie-ep-v1-v5-11-0a042d6b0049@kernel.orgSigned-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

There are two issues related to epf_ntb_epc_cleanup():

  1) It should call epf_ntb_config_sspad_bar_clear()
  2) The epf_ntb_bind() function should call epf_ntb_epc_cleanup()
     to cleanup.

I also changed the ordering a bit.  Unwinding should be done in the
mirror order from how they are allocated.

Fixes: e35f56bb ("PCI: endpoint: Support NTB transfer between RC and EP")
Link: https://lore.kernel.org/linux-pci/aaffbe8d-7094-4083-8146-185f4a84e8a1@moroto.mountainSigned-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

Smatch complains about inconsistent NULL checking in vpci_scan_bus():

    drivers/pci/endpoint/functions/pci-epf-vntb.c:1024 vpci_scan_bus() error: we previously assumed 'vpci_bus' could be null (see line 1021)

Instead of printing an error message and then crashing we should return
an error code and clean up.

Also the NULL check is reversed so it prints an error for success
instead of failure.

Fixes: e35f56bb ("PCI: endpoint: Support NTB transfer between RC and EP")
Link: https://lore.kernel.org/linux-pci/68e0f6a4-fd57-45d0-945b-0876f2c8cb86@moroto.mountainSigned-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

Now that the driver core allows for struct class to be in read-only
memory, we should make all 'class' structures declared at build time
placing them into read-only memory, instead of having to be dynamically
allocated at runtime.

Link: https://lore.kernel.org/linux-pci/2024061011-citable-herbicide-1095@gregkhSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>

As like the 'epc_init' event, that is used to signal the EPF drivers about
the EPC initialization, let's introduce 'epc_deinit' event that is used to
signal EPC deinitialization.

The EPC deinitialization applies only when any sort of fundamental reset
is supported by the endpoint controller as per the PCIe spec.

Reference: PCIe r6.0, sec 4.2.5.9.1 and 6.6.1.

Currently, some EPC drivers like pcie-qcom-ep and pcie-tegra194 support
PERST# as the fundamental reset. So the 'deinit' event will be notified to
the EPF drivers when PERST# assert happens in the above mentioned EPC
drivers.

The EPF drivers, on receiving the event through the epc_deinit() callback
should reset the EPF state machine and also cleanup any configuration that
got affected by the fundamental reset like BAR, DMA etc...

This change also warrants skipping the cleanups in unbind() if already done
in epc_deinit().

Link: https://lore.kernel.org/r/20240606-pci-deinit-v1-2-4395534520dc@linaro.orgSigned-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>

Per PCIe r6.0, sec 5.2, a Link Down event can happen under any of the
following circumstances:

  1. Fundamental/Hot reset
  2. Link disable transmission by upstream component
  3. Moving from L2/L3 to L0

When the event happens, the EPC driver capable of detecting it may pass the
notification to the EPF driver through link_down() callback in 'struct
pci_epc_event_ops'.

While the PCIe spec has not defined the actual behavior of the endpoint
when the Link Down event happens, we may assume that at least the ongoing
transactions need to be stopped as the link won't be active, so
cancel the command handler work in the callback implementation
pci_epf_test_link_down(). The work will be started again in
pci_epf_test_link_up() once the link comes back again.

Link: https://lore.kernel.org/linux-pci/20240430-pci-epf-rework-v4-10-22832d0d456f@linaro.orgTested-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
[bhelgaas: update spec citation]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>

To maintain uniformity across EPF drivers, move DMA initialization to EPC
init callback. This will also allow us to deinit DMA during PERST# assert
in the further commits.

For EPC drivers without PERST#, DMA deinit will only happen during driver
unbind.

Link: https://lore.kernel.org/linux-pci/20240430-pci-epf-rework-v4-6-22832d0d456f@linaro.orgTested-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>

Move the pci_epc_clear_bar() and pci_epf_free_space() code to respective
helper functions. This allows reusing the helpers in future commits.

This also requires moving the pci_epf_test_unbind() definition below
pci_epf_test_bind() to avoid forward declaration of the above helpers.

No functional change.

Link: https://lore.kernel.org/linux-pci/20240430-pci-epf-rework-v4-5-22832d0d456f@linaro.orgTested-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>

BME which stands for 'Bus Master Enable' is not defined in the PCIe base
spec even though it is commonly referred in many places (vendor docs).  To
align with the spec, rename it to its expansion 'Bus Master Enable'.
Suggested-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/linux-pci/20240430-pci-epf-rework-v4-3-22832d0d456f@linaro.org
Link: https://lore.kernel.org/linux-pci/20240430-pci-epf-rework-v4-4-22832d0d456f@linaro.orgTested-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
[bhelgaas: squash removal of irrelevant 'Link is enabled']
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>

core_init() callback is used to notify the EPC initialization event to the
EPF drivers. The 'core' prefix was used indicate that the controller IP
core has completed initialization. But it serves no purpose as the EPF
driver will only care about the EPC initialization as a whole and there is
no real benefit to distinguish the IP core part.

Rename the core_init() callback in 'struct pci_epc_event_ops' to epc_init()
to make it more clear.

Link: https://lore.kernel.org/linux-pci/20240430-pci-epf-rework-v4-2-22832d0d456f@linaro.orgTested-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>

Instead of using a local variable to cache the 'msix_capable' flag, use it
directly to simplify the code.
Suggested-by: Niklas Cassel <cassel@kernel.org>
Link: https://lore.kernel.org/linux-pci/20240418-pci-epf-test-fix-v2-2-eacd54831444@linaro.orgSigned-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>

Instead of getting the epc_features from pci_epc_get_features() API, use
the cached pci_epf_test::epc_features value to avoid the NULL check. Since
the NULL check is already performed in pci_epf_test_bind(), having one more
check in pci_epf_test_core_init() is redundant and it is not possible to
hit the NULL pointer dereference.

Also with commit a01e7214 ("PCI: endpoint: Remove "core_init_notifier"
flag"), 'epc_features' got dereferenced without the NULL check, leading to
the following false positive Smatch warning:

  drivers/pci/endpoint/functions/pci-epf-test.c:784 pci_epf_test_core_init() error: we previously assumed 'epc_features' could be null (see line 747)

Thus, remove the redundant NULL check and also use the epc_features::
{msix_capable/msi_capable} flags directly to avoid local variables.

[kwilczynski: commit log]
Fixes: 5e50ee27 ("PCI: pci-epf-test: Add support to defer core initialization")
Closes: https://lore.kernel.org/linux-pci/024b5826-7180-4076-ae08-57d2584cca3f@moroto.mountain
Link: https://lore.kernel.org/linux-pci/20240418-pci-epf-test-fix-v2-1-eacd54831444@linaro.orgReported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>

In "struct pci_epf_group", the 'type_group' field is unused.

This was added, but already unused, by commit 70b3740f ("PCI: endpoint:
Automatically create a function specific attributes group").

Thus, remove it.

Found with cppcheck, unusedStructMember.

[kwilczynski: commit log]
Link: https://lore.kernel.org/linux-pci/6507d44b6c60a19af35a605e2d58050be8872ab6.1712341008.git.christophe.jaillet@wanadoo.frSigned-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

percpu.h depends on smp.h, but doesn't include it directly because of
circular header dependency issues; percpu.h is needed in a bunch of low
level headers.

This fixes a randconfig build error on mips:

  include/linux/alloc_tag.h: In function '__alloc_tag_ref_set':
  include/asm-generic/percpu.h:31:40: error: implicit declaration of function 'raw_smp_processor_id' [-Werror=implicit-function-declaration]
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 24e44cc2 ("mm: percpu: enable per-cpu allocation tagging")
Closes: https://lore.kernel.org/oe-kbuild-all/202405210052.DIrMXJNz-lkp@intel.com/Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'perf-tools-fixes-for-v6.10-1-2024-05-26' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools

Pull perf tool fix from Arnaldo Carvalho de Melo:
 "Revert a patch causing a regression.

  This made a simple 'perf record -e cycles:pp make -j199' stop working
  on the Ampere ARM64 system Linus uses to test ARM64 kernels".

* tag 'perf-tools-fixes-for-v6.10-1-2024-05-26' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools:
  Revert "perf parse-events: Prefer sysfs/JSON hardware events over legacy"

This reverts commit 617824a7.

This made a simple 'perf record -e cycles:pp make -j199' stop working on
the Ampere ARM64 system Linus uses to test ARM64 kernels, as discussed
at length in the threads in the Link tags below.

The fix provided by Ian wasn't acceptable and work to fix this will take
time we don't have at this point, so lets revert this and work on it on
the next devel cycle.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Cc: Ethan Adams <j.ethan.adams@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Tycho Andersen <tycho@tycho.pizza>
Cc: Yang Jihong <yangjihong@bytedance.com>
Link: https://lore.kernel.org/lkml/CAHk-=wi5Ri=yR2jBVk-4HzTzpoAWOgstr1LEvg_-OXtJvXXJOA@mail.gmail.com
Link: https://lore.kernel.org/lkml/CAHk-=wiWvtFyedDNpoV7a8Fq_FpbB+F5KmWK2xPY3QoYseOf_A@mail.gmail.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Pull smb client fixes from Steve French:

 - two important netfs integration fixes - including for a data
   corruption and also fixes for multiple xfstests

 - reenable swap support over SMB3

* tag '6.10-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: Fix missing set of remote_i_size
  cifs: Fix smb3_insert_range() to move the zero_point
  cifs: update internal version number
  smb3: reenable swapfiles over SMB3 mounts

Merge tag 'mm-hotfixes-stable-2024-05-25-09-13' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull misc fixes from Andrew Morton:
 "16 hotfixes, 11 of which are cc:stable.

  A few nilfs2 fixes, the remainder are for MM: a couple of selftests
  fixes, various singletons fixing various issues in various parts"

* tag 'mm-hotfixes-stable-2024-05-25-09-13' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
  mm/ksm: fix possible UAF of stable_node
  mm/memory-failure: fix handling of dissolved but not taken off from buddy pages
  mm: /proc/pid/smaps_rollup: avoid skipping vma after getting mmap_lock again
  nilfs2: fix potential hang in nilfs_detach_log_writer()
  nilfs2: fix unexpected freezing of nilfs_segctor_sync()
  nilfs2: fix use-after-free of timer for log writer thread
  selftests/mm: fix build warnings on ppc64
  arm64: patching: fix handling of execmem addresses
  selftests/mm: compaction_test: fix bogus test success and reduce probability of OOM-killer invocation
  selftests/mm: compaction_test: fix incorrect write of zero to nr_hugepages
  selftests/mm: compaction_test: fix bogus test success on Aarch64
  mailmap: update email address for Satya Priya
  mm/huge_memory: don't unpoison huge_zero_folio
  kasan, fortify: properly rename memintrinsics
  lib: add version into /proc/allocinfo output
  mm/vmalloc: fix vmalloc which may return null if called with __GFP_NOFAIL

Pull irq fixes from Ingo Molnar:

 - Fix x86 IRQ vector leak caused by a CPU offlining race

 - Fix build failure in the riscv-imsic irqchip driver
   caused by an API-change semantic conflict

 - Fix use-after-free in irq_find_at_or_after()

* tag 'irq-urgent-2024-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  genirq/irqdesc: Prevent use-after-free in irq_find_at_or_after()
  genirq/cpuhotplug, x86/vector: Prevent vector leak during CPU offline
  irqchip/riscv-imsic: Fixup riscv_ipi_set_virq_range() conflict

Pull x86 fixes from Ingo Molnar:

 - Fix regressions of the new x86 CPU VFM (vendor/family/model)
   enumeration/matching code

 - Fix crash kernel detection on buggy firmware with
   non-compliant ACPI MADT tables

 - Address Kconfig warning

* tag 'x86-urgent-2024-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/cpu: Fix x86_match_cpu() to match just X86_VENDOR_INTEL
  crypto: x86/aes-xts - switch to new Intel CPU model defines
  x86/topology: Handle bogus ACPI tables correctly
  x86/kconfig: Select ARCH_WANT_FRAME_POINTERS again when UNWINDER_FRAME_POINTER=y

Pull ipmi updates from Corey Minyard:
 "Mostly updates for deprecated interfaces, platform.remove and
  converting from a tasklet to a BH workqueue.

  Also use HAS_IOPORT for disabling inb()/outb()"

* tag 'for-linus-6.10-1' of https://github.com/cminyard/linux-ipmi:
  ipmi: kcs_bmc_npcm7xx: Convert to platform remove callback returning void
  ipmi: kcs_bmc_aspeed: Convert to platform remove callback returning void
  ipmi: ipmi_ssif: Convert to platform remove callback returning void
  ipmi: ipmi_si_platform: Convert to platform remove callback returning void
  ipmi: ipmi_powernv: Convert to platform remove callback returning void
  ipmi: bt-bmc: Convert to platform remove callback returning void
  char: ipmi: handle HAS_IOPORT dependencies
  ipmi: Convert from tasklet to BH workqueue

Pull ceph updates from Ilya Dryomov:
 "A series from Xiubo that adds support for additional access checks
  based on MDS auth caps which were recently made available to clients.

  This is needed to prevent scenarios where the MDS quietly discards
  updates that a UID-restricted client previously (wrongfully) acked to
  the user.

  Other than that, just a documentation fixup"

* tag 'ceph-for-6.10-rc1' of https://github.com/ceph/ceph-client:
  doc: ceph: update userspace command to get CephFS metadata
  ceph: add CEPHFS_FEATURE_MDS_AUTH_CAPS_CHECK feature bit
  ceph: check the cephx mds auth access for async dirop
  ceph: check the cephx mds auth access for open
  ceph: check the cephx mds auth access for setattr
  ceph: add ceph_mds_check_access() helper
  ceph: save cap_auths in MDS client when session is opened

Pull ntfs3 updates from Konstantin Komarov:
 "Fixes:
   - reusing of the file index (could cause the file to be trimmed)
   - infinite dir enumeration
   - taking DOS names into account during link counting
   - le32_to_cpu conversion, 32 bit overflow, NULL check
   - some code was refactored

  Changes:
   - removed max link count info display during driver init

  Remove:
   - atomic_open has been removed for lack of use"

* tag 'ntfs3_for_6.10' of https://github.com/Paragon-Software-Group/linux-ntfs3:
  fs/ntfs3: Break dir enumeration if directory contents error
  fs/ntfs3: Fix case when index is reused during tree transformation
  fs/ntfs3: Mark volume as dirty if xattr is broken
  fs/ntfs3: Always make file nonresident on fallocate call
  fs/ntfs3: Redesign ntfs_create_inode to return error code instead of inode
  fs/ntfs3: Use variable length array instead of fixed size
  fs/ntfs3: Use 64 bit variable to avoid 32 bit overflow
  fs/ntfs3: Check 'folio' pointer for NULL
  fs/ntfs3: Missed le32_to_cpu conversion
  fs/ntfs3: Remove max link count info display during driver init
  fs/ntfs3: Taking DOS names into account during link counting
  fs/ntfs3: remove atomic_open
  fs/ntfs3: use kcalloc() instead of kzalloc()

Pull smb server fixes from Steve French:
 "Two ksmbd server fixes, both for stable"

* tag '6.10-rc-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
  ksmbd: ignore trailing slashes in share paths
  ksmbd: avoid to send duplicate oplock break notifications

Pull RTC updates from Alexandre Belloni:
 "There is one new driver and then most of the changes are the device
  tree bindings conversions to yaml.

  New driver:
   - Epson RX8111

  Drivers:
   - Many Device Tree bindings conversions to dtschema
   - pcf8563: wakeup-source support"

* tag 'rtc-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
  pcf8563: add wakeup-source support
  rtc: rx8111: handle VLOW flag
  rtc: rx8111: demote warnings to debug level
  rtc: rx6110: Constify struct regmap_config
  dt-bindings: rtc: convert trivial devices into dtschema
  dt-bindings: rtc: stmp3xxx-rtc: convert to dtschema
  dt-bindings: rtc: pxa-rtc: convert to dtschema
  rtc: Add driver for Epson RX8111
  dt-bindings: rtc: Add Epson RX8111
  rtc: mcp795: drop unneeded MODULE_ALIAS
  rtc: nuvoton: Modify part number value
  rtc: test: Split rtc unit test into slow and normal speed test
  dt-bindings: rtc: nxp,lpc1788-rtc: convert to dtschema
  dt-bindings: rtc: digicolor-rtc: move to trivial-rtc
  dt-bindings: rtc: alphascale,asm9260-rtc: convert to dtschema
  dt-bindings: rtc: armada-380-rtc: convert to dtschema
  rtc: cros-ec: provide ID table for avoiding fallback match

Pull i3c updates from Alexandre Belloni:
 "Runtime PM (power management) is improved and hot-join support has
  been added to the dw controller driver.

  Core:
   - Allow device driver to trigger controller runtime PM

  Drivers:
   - dw: hot-join support
   - svc: better IBI handling"

* tag 'i3c/for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
  i3c: dw: Add hot-join support.
  i3c: master: Enable runtime PM for master controller
  i3c: master: svc: fix invalidate IBI type and miss call client IBI handler
  i3c: master: svc: change ENXIO to EAGAIN when IBI occurs during start frame
  i3c: Add comment for -EAGAIN in i3c_device_do_priv_xfers()

Pull jffs2 updates from Richard Weinberger:

 - Fix illegal memory access in jffs2_free_inode()

 - Kernel-doc fixes

 - print symbolic error names

* tag 'jffs2-for-linus-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs:
  jffs2: Fix potential illegal address access in jffs2_free_inode
  jffs2: Simplify the allocation of slab caches
  jffs2: nodemgmt: fix kernel-doc comments
  jffs2: print symbolic error name instead of error code