- 12 Aug, 2014 1 commit
-
-
Lucas Tanure authored
Fix missing include in Intel i40e driver. Without this include linux next tree won't compile. Signed-off-by:
Lucas Tanure <tanure@linux.com> Tested-by:
Jim Young <jamesx.m.young@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 11 Aug, 2014 27 commits
-
-
David S. Miller authored
Florian Fainelli says: ==================== net: bcmgenet: Wake-on-LAN and suspend fixes This patch series fixes some mistakes that were introduced during the driver changes adding support suspend/resume and Wake-on-LAN. ==================== Signed-off-by:David S. Miller <davem@davemloft.net>
-
Florian Fainelli authored
In case we configured the adapter to be a wake up source from Wake-on-LAN, but we never actually woke up using Wake-on-LAN, we will leave the adapter in MagicPacket matching mode, which prevents any other type of packets from reaching the RX engine. Fix this by calling bcmgenet_power_up() with GENET_POWER_WOL_MAGIC to restore the adapter configuration in bcmgenet_resume(). The second problem we had was an imbalanced clock disabling in bcmgenet_wol_resume(), the Wake-on-LAN slow clock is only enabled in bcmgenet_suspend() if we configured Wake-on-LAN, yet we unconditionally disabled the clock in bcmgenet_wol_resume(). Fixes: 8c90db72 ("net: bcmgenet: suspend and resume from Wake-on-LAN") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Florian Fainelli authored
When we bring the interface down, phy_stop() will schedule the PHY state machine to call our link adjustment callback. By the time we do so, we may have clock gated off the GENET hardware block, and this will cause bus errors to happen in bcmgenet_mii_setup(): Make sure that we only touch the UMAC_CMD register when there is an actual link. This is safe to do for two reasons: - updating the Ethernet MAC registers only make sense when a physical link is present - the PHY library state machine first set phydev->link = 0 before invoking phydev->adjust_link in the PHY_HALTED case Fixes: 24052408 ("net: bcmgenet: only update UMAC_CMD if something changed") Signed-off-by:
-
Florian Fainelli authored
Make sure that we properly suspend and resume the PHY device when we enter low power modes. We had two calls to bcmgenet_mii_reset() which will issue a software-reset to the PHY without using the PHY library, get rid of them since they are completely bogus and mess up with the PHY library state. Make sure that we reset the PHY library cached values (link, pause and duplex) to allow the link adjustment callback to be invoked when needed. Fixes: b6e978e5 ("net: bcmgenet: add suspend/resume callbacks") Fixes: 1c1008c7 ("net: bcmgenet: add main driver file") Signed-off-by:
-
Florian Fainelli authored
bcmgenet_set_hw_params() will read the hardware version and compare it with the one we are getting from Device Tree. Due to the clock being enabled too late, bcmgenet_set_hw_params() will cause bus errors since the GENET hardware block is still gated off by the time bcmgenet_set_hw_params() is called, this will also make us fail the version check since we will read the value 0 from the hardware. Fix this by requesting the clock before the first piece of code that needs to access hardware register. Fixes: 1c1008c7 ("net: bcmgenet: add main driver file") Signed-off-by:
-
Rickard Strandqvist authored
Added a guaranteed null-terminate after call to strncpy. Signed-off-by:
Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Signed-off-by:
-
Zoltan Kiss authored
There is a long known problem with the netfront/netback interface: if the guest tries to send a packet which constitues more than MAX_SKB_FRAGS + 1 ring slots, it gets dropped. The reason is that netback maps these slots to a frag in the frags array, which is limited by size. Having so many slots can occur since compound pages were introduced, as the ring protocol slice them up into individual (non-compound) page aligned slots. The theoretical worst case scenario looks like this (note, skbs are limited to 64 Kb here): linear buffer: at most PAGE_SIZE - 17 * 2 bytes, overlapping page boundary, using 2 slots first 15 frags: 1 + PAGE_SIZE + 1 bytes long, first and last bytes are at the end and the beginning of a page, therefore they use 3 * 15 = 45 slots last 2 frags: 1 + 1 bytes, overlapping page boundary, 2 * 2 = 4 slots Although I don't think this 51 slots skb can really happen, we need a solution which can deal with every scenario. In real life there is only a few slots overdue, but usually it causes the TCP stream to be blocked, as the retry will most likely have the same buffer layout. This patch solves this problem by linearizing the packet. This is not the fastest way, and it can fail much easier as it tries to allocate a big linear area for the whole packet, but probably easier by an order of magnitude than anything else. Probably this code path is not touched very frequently anyway. Signed-off-by:
Zoltan Kiss <zoltan.kiss@citrix.com> Cc: Wei Liu <wei.liu2@citrix.com> Cc: Ian Campbell <Ian.Campbell@citrix.com> Cc: Paul Durrant <paul.durrant@citrix.com> Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: xen-devel@lists.xenproject.org Signed-off-by:
-
Uwe Kleine-König authored
This adds support for specifying the phy to be used with the fec in the devicetree using the standard phy-handle property and also supports fixed-link. Signed-off-by:
Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by:
-
Sanjeev Sharma authored
spin_is_locked() always return false in uniprocessor configuration and therefore it would be advise to repalce with WARN_ON_SMP(). Signed-off-by:
Sanjeev Sharma <Sanjeev_Sharma@mentor.com> Signed-off-by:
-
Zoltan Kiss authored
In the patch called "xen-netback: Turn off the carrier if the guest is not able to receive" NAPI was descheduled when the carrier was set off. That's not what most of the drivers do, and we don't have any specific reason to do so as well, so revert that change. Signed-off-by:
Wei Liu <wei.liu2@citrix.com> Signed-off-by:
-
Andreas Ruprecht authored
In the Makefile, qlcnic_minidump.o is included twice in the list of object files linked into qlcnic.o. This change removes the superfluous include. Signed-off-by:
Andreas Ruprecht <rupran@einserver.de> Signed-off-by:
-
Himangi Saraogi authored
The Linux kernel coding style guidelines suggest not using typedefs for structure types. This patch gets rid of the typedefs for port_t, card_status_t and card_t. Also, the names of the structs are changed to drop the _t, to make the name look less typedef-like. The following Coccinelle semantic patch detects two cases and a similar one detects the case for card_t. @tn1@ type td; @@ typedef struct { ... } td; @script:python tf@ td << tn1.td; tdres; @@ coccinelle.tdres = td; @@ type tn1.td; identifier tf.tdres; @@ -typedef struct + tdres { ... } -td ; @@ type tn1.td; identifier tf.tdres; @@ -td + struct tdres Signed-off-by:Himangi Saraogi <himangi774@gmail.com> Acked-by:
Julia Lawall <julia.lawall@lip6.fr> Signed-off-by:
-
Michael Schmitz authored
Support for Atari EtherNEC ROM port adapters in ne.c Signed-off-by:
Michael Schmitz <schmitz@debian.org> Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
Rickard Strandqvist authored
Added a guaranteed null-terminate after call to strncpy. Signed-off-by:
-
Himangi Saraogi authored
The Linux kernel coding style guidelines suggest not using typedefs for structure types. This patch gets rid of the typedefs for fr_hdr and pvc_device. Also, the names of the structs are changed to drop the _t, to make the name look less typedef-like. The following Coccinelle semantic patch detects the case fr_hdr and a similar one detects the case for pvc_device. @tn1@ type td; @@ typedef struct { ... } td; @script:python tf@ td << tn1.td; tdres; @@ coccinelle.tdres = td; @@ type tn1.td; identifier tf.tdres; @@ -typedef struct + tdres { ... } -td ; @@ type tn1.td; identifier tf.tdres; @@ -td + struct tdres Signed-off-by: -
Himangi Saraogi authored
The Linux kernel coding style guidelines suggest not using typedefs for structure types. This patch gets rid of the typedef for local_info_t. Also, the name of the struct is changed to drop the _t, to make the name look less typedef-like. The following Coccinelle semantic patch detects the case: @tn@ identifier i; type td; @@ -typedef struct i { ... } -td ; @@ type tn.td; identifier tn.i; @@ -td + struct i Signed-off-by: -
Himangi Saraogi authored
The Linux kernel coding style guidelines suggest not using typedefs for structure types. This patch gets rid of the typedef for atmel_priv_ioctl. The following Coccinelle semantic patch detects the case: @tn@ identifier i; type td; @@ -typedef struct i { ... } -td ; @@ type tn.td; identifier tn.i; @@ -td + struct i Signed-off-by: -
Himangi Saraogi authored
The Linux kernel coding style guidelines suggest not using typedefs for structure types. This patch gets rid of the typedef for com20020_dev_t. Also, the name of the struct is changed to drop the _t, to make the name look less typedef-like. The following Coccinelle semantic patch detects the case: @tn@ identifier i; type td; @@ -typedef struct i { ... } -td ; @@ type tn.td; identifier tn.i; @@ -td + struct i Signed-off-by: -
Himangi Saraogi authored
The Linux kernel coding style guidelines suggest not using typedefs for structure types. This patch gets rid of the typedef for local_info_t. Also, the name of the struct is changed to drop the _t, to make the name look less typedef-like. The following Coccinelle semantic patch detects the case: @tn@ identifier i; type td; @@ -typedef struct i { ... } -td ; @@ type tn.td; identifier tn.i; @@ -td + struct i Signed-off-by: -
Vlad Yasevich authored
Currently the functionality to untag traffic on input resides as part of the vlan module and is build only when VLAN support is enabled in the kernel. When VLAN is disabled, the function vlan_untag() turns into a stub and doesn't really untag the packets. This seems to create an interesting interaction between VMs supporting checksum offloading and some network drivers. There are some drivers that do not allow the user to change tx-vlan-offload feature of the driver. These drivers also seem to assume that any VLAN-tagged traffic they transmit will have the vlan information in the vlan_tci and not in the vlan header already in the skb. When transmitting skbs that already have tagged data with partial checksum set, the checksum doesn't appear to be updated correctly by the card thus resulting in a failure to establish TCP connections. The following is a packet trace taken on the receiver where a sender is a VM with a VLAN configued. The host VM is running on doest not have VLAN support and the outging interface on the host is tg3: 10:12:43.503055 52:54:00:ae:42:3f > 28:d2:44:7d:c2:de, ethertype 802.1Q (0x8100), length 78: vlan 100, p 0, ethertype IPv4, (tos 0x0, ttl 64, id 27243, offset 0, flags [DF], proto TCP (6), length 60) 10.0.100.1.58545 > 10.0.100.10.ircu-2: Flags [S], cksum 0xdc39 (incorrect -> 0x48d9), seq 1069378582, win 29200, options [mss 1460,sackOK,TS val 4294837885 ecr 0,nop,wscale 7], length 0 10:12:44.505556 52:54:00:ae:42:3f > 28:d2:44:7d:c2:de, ethertype 802.1Q (0x8100), length 78: vlan 100, p 0, ethertype IPv4, (tos 0x0, ttl 64, id 27244, offset 0, flags [DF], proto TCP (6), length 60) 10.0.100.1.58545 > 10.0.100.10.ircu-2: Flags [S], cksum 0xdc39 (incorrect -> 0x44ee), seq 1069378582, win 29200, options [mss 1460,sackOK,TS val 4294838888 ecr 0,nop,wscale 7], length 0 This connection finally times out. I've only access to the TG3 hardware in this configuration thus have only tested this with TG3 driver. There are a lot of other drivers that do not permit user changes to vlan acceleration features, and I don't know if they all suffere from a similar issue. The patch attempt to fix this another way. It moves the vlan header stipping code out of the vlan module and always builds it into the kernel network core. This way, even if vlan is not supported on a virtualizatoin host, the virtual machines running on top of such host will still work with VLANs enabled. CC: Patrick McHardy <kaber@trash.net> CC: Nithin Nayak Sujir <nsujir@broadcom.com> CC: Michael Chan <mchan@broadcom.com> CC: Jiri Pirko <jiri@resnulli.us> Signed-off-by:Vladislav Yasevich <vyasevic@redhat.com> Acked-by:
Jiri Pirko <jiri@resnulli.us> Signed-off-by:
-
David S. Miller authored
Iyappan Subramanian says: ==================== net: Add APM X-Gene SoC Ethernet driver support Adding APM X-Gene SoC Ethernet driver. v10: Address comments from v9 review * Documentation: aligned descriptions * simplified struct platform_driver initialization * fixed xgene_enet_mdio_config error path * fixed xgene_enet_init_hw error path * removed statistics spin_lock as it is not required * changed raw_desc fields to type __le64 * defined helper macros for set/get raw_descriptor fields v9: Address comments from v8 review * changed to direct read/write, byteswap into raw descriptor * fixed xgene_enet_create_desc_ring() error handling * removed references to IS_ERR_OR_NULL * disabled half duplex on phy_devce supported/advertising * simplified xgene_enet_adjust_link() function * fixed sparse tool compilation warnings v8: Address comments from v7 review * changed angle bracket to double quotes in header file include. v7: Address comments from v6 review * fixed skb memory leak when dma_map_single fails in xmit. v6: Address comments from v5 review * added basic ethtool support * added ndo_get_stats64 call back * deleted priting Rx error messages * renamed set_bits to xgene_set_bits to fix kbuild error (make ARCH=powerpc) v5: Address comments from v4 review * Documentation: Added phy-handle, reg-names and changed mdio part * dtb: Added reg-names supplemental property * changed platform_get_resource to platform_get_resource_byname * added separate tx/rx set_desc/get_desc functions to do raw_write/raw_read * removed set_desc/get_desc table lookup logic * added error handling logic based on per packet descriptor bits * added software managed Rx packet and error counters * added busy wait for register read/writes * changed mdio_bus->id to avoid conflict * fixed mdio_bus leak in case of mdio_config error * changed phy reg hard coded value to MII_BMSR * changed phy addr hard coded value to phy_device->addr * added paranthesis around macro arguments * converted helper macros to inline functions * changed use of goto's only to common work such as cleanup v4: Address comments from v3 review * MAINTAINERS: changed status to supported * Kconfig: made default to no * changed to bool data type wherever applicable * cleaned up single bit set and masking code * removed statistics counters masking * removed unnecessary OOM message printing * fixed dma_map_single and dma_unmap_single size parameter * changed set bits macro body using new set_bits function v3: Address comments from v2 review * cleaned up set_desc and get_desc functions * added dtb mdio node and phy-handle subnode * renamed dtb phy-mode to phy-connection-type * added of_phy_connect call to connec to PHY * added empty line after last local variable declaration * removed type casting when not required * removed inline keyword from source files * removed CONFIG_CPU_BIG_ENDIAN ifdef v2 * Completely redesigned ethernet driver * Added support to work with big endian kernel * Renamed dtb phyid entry to phy_addr * Changed dtb local-mac-address entry to byte string format * Renamed dtb eth8clk entry to menetclk v1 * Initial version ==================== Signed-off-by:
Iyappan Subramanian <isubramanian@apm.com> Signed-off-by:
Ravi Patel <rapatel@apm.com> Signed-off-by:
Keyur Chudgar <kchudgar@apm.com> Signed-off-by:
-
Iyappan Subramanian authored
This patch adds network driver for APM X-Gene SoC ethernet. Signed-off-by:
Dean Nelson <dnelson@redhat.com> Reviewed-by:
Tobias Klauser <tklauser@distanz.ch> Signed-off-by:
-
Iyappan Subramanian authored
This patch adds bindings for APM X-Gene SoC ethernet driver. Signed-off-by:
-
Iyappan Subramanian authored
This patch adds documentation for APM X-Gene SoC ethernet DTS binding. Signed-off-by:
-
Iyappan Subramanian authored
This patch adds a MAINTAINERS entry for APM X-Gene SoC ethernet driver. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller authored
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains fixes for your net tree, they are: 1) Unitialize the set element key and data from the commit path, otherwise this leaks chain refcount if the transaction is aborted, reported by Thomas Graf. 2) Fix crash when updating chains without no counters in nf_tables, this slipped through in the new transaction infrastructure, reported by Matteo Croce. 3) Replace all mutex_lock_interruptible() by mutex_lock() in the Netfilter tree, suggested by Patrick McHardy. This implicitly fixes the problem that Eric Dumazet reported in: http://patchwork.ozlabs.org/patch/373076/ 4) Fix error return code in nf_tables when deleting set element in nf_tables if the transaction cannot be allocated, from Julia Lawall. ==================== Signed-off-by:
-
Uwe Kleine-König authored
My series to fix the reference counting of dt nodes introduced a build failure. Fix it. Fixes: fa310789 ("net: ucc_geth: drop acquired references in probe error path and remove") Signed-off-by:
-
- 08 Aug, 2014 10 commits
-
-
Himangi Saraogi authored
The Linux kernel coding style guidelines suggest not using typedefs for structure types. This patch gets rid of the typedef for board_info_t. Also, the name of the structs is changed to drop the _t, to make the name look less typedef-like. The following Coccinelle semantic patch detects the cases: @tn@ identifier i; type td; @@ -typedef struct i { ... } -td ; @@ type tn.td; identifier tn.i; @@ -td + struct i Signed-off-by: -
Jiri Benc authored
Commit 1d8faf48 ("net/core: Add VF link state control") added new attribute to IFLA_VF_INFO group in rtnl_fill_ifinfo but did not adjust size of the allocated memory in if_nlmsg_size/rtnl_vfinfo_size. As the result, we may trigger warnings in rtnl_getlink and similar functions when many VF links are enabled, as the information does not fit into the allocated skb. Fixes: 1d8faf48 ("net/core: Add VF link state control") Reported-by:
Yulong Pei <ypei@redhat.com> Signed-off-by:
Jiri Benc <jbenc@redhat.com> Signed-off-by:
-
Julia Lawall authored
Of_node_put supports NULL as its argument, so the initial test is not necessary. Suggested by Uwe Kleine-König. The semantic patch that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression e; @@ -if (e) of_node_put(e); // </smpl> Signed-off-by:
-
Julia Lawall authored
Of_node_put supports NULL as its argument, so the initial test is not necessary. Suggested by Uwe Kleine-König. The semantic patch that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression e; @@ -if (e) of_node_put(e); // </smpl> Signed-off-by:
Michal Simek <michal.simek@xilinx.com> Signed-off-by:
-
Julia Lawall authored
Of_node_put supports NULL as its argument, so the initial test is not necessary. Suggested by Uwe Kleine-König. The semantic patch that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression e; @@ -if (e) of_node_put(e); // </smpl> Signed-off-by:
-
Niv Yehezkel authored
Since fib_lookup cannot return ESRCH no longer, checking for this error code is no longer neccesary. Signed-off-by:
Niv Yehezkel <executerx@gmail.com> Signed-off-by:
-
Julia Lawall authored
Convert a zero return value on error to a negative one, as returned elsewhere in the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ identifier ret; expression e1,e2; @@ ( if (\(ret < 0\|ret != 0\)) { ... return ret; } | ret = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // </smpl> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-
Pablo Neira Ayuso authored
Eric Dumazet reports that getsockopt() or setsockopt() sometimes returns -EINTR instead of -ENOPROTOOPT, causing headaches to application developers. This patch replaces all the mutex_lock_interruptible() by mutex_lock() in the netfilter tree, as there is no reason we should sleep for a long time there. Reported-by:
Eric Dumazet <edumazet@google.com> Suggested-by:
Patrick McHardy <kaber@trash.net> Signed-off-by:
Julian Anastasov <ja@ssi.bg>
-
Pablo Neira Ayuso authored
Fix possible replacement of the per-cpu chain counters by null pointer when updating an existing chain in the commit path. Reported-by:
Matteo Croce <technoboy85@gmail.com> Signed-off-by:
-
Pablo Neira Ayuso authored
This should happen once the element has been effectively released in the commit path, not before. This fixes a possible chain refcount leak if the transaction is aborted. Reported-by:
Thomas Graf <tgraf@suug.ch> Signed-off-by:
-
- 07 Aug, 2014 2 commits
-
-
Anish Bhatt authored
* Changes required due to 16eecd9b ("dcbnl : Fix misleading dcb_app->priority explanation") * Driver was previously not aware of what DCBx version was negotiated by firmware, this could lead to DCB app table in kernel or in firmware being populated wrong since IEEE/CEE used different formats made clear by above mentioned commit * Driver was missing a couple of state transitions that could be caused by other drivers that use chelsio hardware, resulting in incorrect behaviour (the change that addresses this also flips the state machine to switch on state instead of transition, hope this is okay in current window) * Prio queue info & tsa is no longer thrown away v2: Print DCBx state transition messages only when debug is enabled Signed-off-by:
Anish Bhatt <anish@chelsio.com> Signed-off-by:
-
Uwe Kleine-König authored
This matches what the other drivers using fixed-link support do and restores the behaviour before commit 87009814 ("ucc_geth: use the new fixed PHY helpers") for the affected device trees (i.e. no phy-handle and no fixed-link). Fixes: 87009814 ("ucc_geth: use the new fixed PHY helpers") Signed-off-by:
-
