- 27 Aug, 2024 3 commits
-
-
Petr Machata authored
This test neglects to put ports down on cleanup. Fix it. Fixes: 476a4f05 ("selftests: forwarding: add a no_forwarding.sh test") Signed-off-by:
Petr Machata <petrm@nvidia.com> Reviewed-by:
Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/0baf91dc24b95ae0cadfdf5db05b74888e6a228a.1724430120.git.petrm@nvidia.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Eric Dumazet authored
fq_dequeue() has a complex logic to find packets in one of the 3 bands. As Neal found out, it is possible that one band has a deficit smaller than its weight. fq_dequeue() can return NULL while some packets are elligible for immediate transmit. In this case, more than one iteration is needed to refill pband->credit. With default parameters (weights 589824 196608 65536) bug can trigger if large BIG TCP packets are sent to the lowest priority band. Bisected-by:
John Sperbeck <jsperbeck@google.com> Diagnosed-by:
Neal Cardwell <ncardwell@google.com> Fixes: 29f834aa ("net_sched: sch_fq: add 3 bands and WRR scheduling") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reviewed-by:
-
Brett Creeley authored
With recent work to the doorbell workaround code a small hole was introduced that could cause a tx_timeout. This happens if the rx dbell_deadline goes beyond the netdev watchdog timeout set by the driver (i.e. 2 seconds). Fix this by changing the netdev watchdog timeout to 5 seconds and reduce the max rx dbell_deadline to 4 seconds. The test that can reproduce the issue being fixed is a multi-queue send test via pktgen with the "burst" setting to 1. This causes the queue's doorbell to be rung on every packet sent to the driver, which may result in the device missing doorbells due to the high doorbell rate. Cc: stable@vger.kernel.org Fixes: 4ded136c ("ionic: add work item for missed-doorbell check") Signed-off-by:
Brett Creeley <brett.creeley@amd.com> Reviewed-by:
Shannon Nelson <shannon.nelson@amd.com> Link: https://patch.msgid.link/20240822192557.9089-1-brett.creeley@amd.comSigned-off-by:
Paolo Abeni <pabeni@redhat.com>
-
- 26 Aug, 2024 4 commits
-
-
MD Danish Anwar authored
Crash is seen on AM64x 10M link when connecting / disconnecting multiple times. The fix for this is to enable quirk_10m_link_issue for AM64x. Fixes: b256e133 ("net: ti: icssg-prueth: Add AM64x icssg support") Signed-off-by:
MD Danish Anwar <danishanwar@ti.com> Reviewed-by:
Roger Quadros <rogerq@kernel.org> Link: https://patch.msgid.link/20240823120412.1262536-1-danishanwar@ti.comSigned-off-by:
-
Jamie Bainbridge authored
A sysfs reader can race with a device reset or removal, attempting to read device state when the device is not actually present. eg: [exception RIP: qed_get_current_link+17] #8 [ffffb9e4f2907c48] qede_get_link_ksettings at ffffffffc07a994a [qede] #9 [ffffb9e4f2907cd8] __rh_call_get_link_ksettings at ffffffff992b01a3 #10 [ffffb9e4f2907d38] __ethtool_get_link_ksettings at ffffffff992b04e4 #11 [ffffb9e4f2907d90] duplex_show at ffffffff99260300 #12 [ffffb9e4f2907e38] dev_attr_show at ffffffff9905a01c #13 [ffffb9e4f2907e50] sysfs_kf_seq_show at ffffffff98e0145b #14 [ffffb9e4f2907e68] seq_read at ffffffff98d902e3 #15 [ffffb9e4f2907ec8] vfs_read at ffffffff98d657d1 #16 [ffffb9e4f2907f00] ksys_read at ffffffff98d65c3f #17 [ffffb9e4f2907f38] do_syscall_64 at ffffffff98a052fb crash> struct net_device.state ffff9a9d21336000 state = 5, state 5 is __LINK_STATE_START (0b1) and __LINK_STATE_NOCARRIER (0b100). The device is not present, note lack of __LINK_STATE_PRESENT (0b10). This is the same sort of panic as observed in commit 4224cfd7 ("net-sysfs: add check for netdevice being present to speed_show"). There are many other callers of __ethtool_get_link_ksettings() which don't have a device presence check. Move this check into ethtool to protect all callers. Fixes: d519e17e ("net: export device speed and duplex via sysfs") Fixes: 4224cfd7 ("net-sysfs: add check for netdevice being present to speed_show") Signed-off-by:Jamie Bainbridge <jamie.bainbridge@gmail.com> Link: https://patch.msgid.link/8bae218864beaa44ed01628140475b9bf641c5b0.1724393671.git.jamie.bainbridge@gmail.comSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetoothJakub Kicinski authored
Luiz Augusto von Dentz says: ==================== bluetooth pull request for net: - btintel: Allow configuring drive strength of BRI - hci_core: Fix not handling hibernation actions - btnxpuart: Fix random crash seen while removing driver * tag 'for-net-2024-08-23' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth: Bluetooth: hci_core: Fix not handling hibernation actions Bluetooth: btnxpuart: Fix random crash seen while removing driver Bluetooth: btintel: Allow configuring drive strength of BRI ==================== Link: https://patch.msgid.link/20240823200008.65241-1-luiz.dentz@gmail.comSigned-off-by:
-
Jacky Chou authored
The driver must ensure TX descriptor updates are visible before updating TX pointer and TX clear pointer. This resolves TX hangs observed on AST2600 when running iperf3. Signed-off-by:
Jacky Chou <jacky_chou@aspeedtech.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 23 Aug, 2024 6 commits
-
-
Luiz Augusto von Dentz authored
This fixes not handling hibernation actions on suspend notifier so they are treated in the same way as regular suspend actions. Fixes: 9952d90e ("Bluetooth: Handle PM_SUSPEND_PREPARE and PM_POST_SUSPEND") Signed-off-by:
Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
-
Neeraj Sanjay Kale authored
This fixes the random kernel crash seen while removing the driver, when running the load/unload test over multiple iterations. 1) modprobe btnxpuart 2) hciconfig hci0 reset 3) hciconfig (check hci0 interface up with valid BD address) 4) modprobe -r btnxpuart Repeat steps 1 to 4 The ps_wakeup() call in btnxpuart_close() schedules the psdata->work(), which gets scheduled after module is removed, causing a kernel crash. This hidden issue got highlighted after enabling Power Save by default in 4183a7be (Bluetooth: btnxpuart: Enable Power Save feature on startup) The new ps_cleanup() deasserts UART break immediately while closing serdev device, cancels any scheduled ps_work and destroys the ps_lock mutex. [ 85.884604] Unable to handle kernel paging request at virtual address ffffd4a61638f258 [ 85.884624] Mem abort info: [ 85.884625] ESR = 0x0000000086000007 [ 85.884628] EC = 0x21: IABT (current EL), IL = 32 bits [ 85.884633] SET = 0, FnV = 0 [ 85.884636] EA = 0, S1PTW = 0 [ 85.884638] FSC = 0x07: level 3 translation fault [ 85.884642] swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000041dd0000 [ 85.884646] [ffffd4a61638f258] pgd=1000000095fff003, p4d=1000000095fff003, pud=100000004823d003, pmd=100000004823e003, pte=0000000000000000 [ 85.884662] Internal error: Oops: 0000000086000007 [#1] PREEMPT SMP [ 85.890932] Modules linked in: algif_hash algif_skcipher af_alg overlay fsl_jr_uio caam_jr caamkeyblob_desc caamhash_desc caamalg_desc crypto_engine authenc libdes crct10dif_ce polyval_ce polyval_generic snd_soc_imx_spdif snd_soc_imx_card snd_soc_ak5558 snd_soc_ak4458 caam secvio error snd_soc_fsl_spdif snd_soc_fsl_micfil snd_soc_fsl_sai snd_soc_fsl_utils gpio_ir_recv rc_core fuse [last unloaded: btnxpuart(O)] [ 85.927297] CPU: 1 PID: 67 Comm: kworker/1:3 Tainted: G O 6.1.36+g937b1be4345a #1 [ 85.936176] Hardware name: FSL i.MX8MM EVK board (DT) [ 85.936182] Workqueue: events 0xffffd4a61638f380 [ 85.936198] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 85.952817] pc : 0xffffd4a61638f258 [ 85.952823] lr : 0xffffd4a61638f258 [ 85.952827] sp : ffff8000084fbd70 [ 85.952829] x29: ffff8000084fbd70 x28: 0000000000000000 x27: 0000000000000000 [ 85.963112] x26: ffffd4a69133f000 x25: ffff4bf1c8540990 x24: ffff4bf215b87305 [ 85.963119] x23: ffff4bf215b87300 x22: ffff4bf1c85409d0 x21: ffff4bf1c8540970 [ 85.977382] x20: 0000000000000000 x19: ffff4bf1c8540880 x18: 0000000000000000 [ 85.977391] x17: 0000000000000000 x16: 0000000000000133 x15: 0000ffffe2217090 [ 85.977399] x14: 0000000000000001 x13: 0000000000000133 x12: 0000000000000139 [ 85.977407] x11: 0000000000000001 x10: 0000000000000a60 x9 : ffff8000084fbc50 [ 85.977417] x8 : ffff4bf215b7d000 x7 : ffff4bf215b83b40 x6 : 00000000000003e8 [ 85.977424] x5 : 00000000410fd030 x4 : 0000000000000000 x3 : 0000000000000000 [ 85.977432] x2 : 0000000000000000 x1 : ffff4bf1c4265880 x0 : 0000000000000000 [ 85.977443] Call trace: [ 85.977446] 0xffffd4a61638f258 [ 85.977451] 0xffffd4a61638f3e8 [ 85.977455] process_one_work+0x1d4/0x330 [ 85.977464] worker_thread+0x6c/0x430 [ 85.977471] kthread+0x108/0x10c [ 85.977476] ret_from_fork+0x10/0x20 [ 85.977488] Code: bad PC value [ 85.977491] ---[ end trace 0000000000000000 ]--- Preset since v6.9.11 Fixes: 86d55f12 ("Bluetooth: btnxpuart: Deasset UART break before closing serdev device") Signed-off-by:
Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> Reviewed-by:
Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by:
-
Kiran K authored
BRI (Bluetooth Radio Interface) traffic from CNVr to CNVi was found causing cross talk step errors to WiFi. To avoid this potential issue OEM platforms can replace BRI resistor to adjust the BRI response line drive strength. During the *setup*, driver reads the drive strength value from uefi variable and passes it to the controller via vendor specific command with opcode 0xfc0a. dmesg: .. [21.982720] Bluetooth: hci0: Bootloader timestamp 2023.33 buildtype 1 build 45995 [21.984250] Bluetooth: hci0: Found device firmware: intel/ibt-0190-0291-iml.sfi [21.984255] Bluetooth: hci0: Boot Address: 0x30099000 [21.984256] Bluetooth: hci0: Firmware Version: 160-24.24 [22.011501] Bluetooth: hci0: Waiting for firmware download to complete [22.011518] Bluetooth: hci0: Firmware loaded in 26624 usecs [22.011584] Bluetooth: hci0: Waiting for device to boot [22.013546] Bluetooth: hci0: Malformed MSFT vendor event: 0x02 [22.013552] Bluetooth: hci0: Device booted in 1967 usecs ... [22.013792] Bluetooth: hci0: dsbr: enable: 0x01 value: 0x0b ... [22.015027] Bluetooth: hci0: Found device firmware: intel/ibt-0190-0291.sfi [22.015041] Bluetooth: hci0: Boot Address: 0x10000800 [22.015043] Bluetooth: hci0: Firmware Version: 160-24.24 [22.395821] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [22.395828] Bluetooth: BNEP filters: protocol multicast ... Signed-off-by:
Kiran K <kiran.k@intel.com> Signed-off-by:
-
Haiyang Zhang authored
The mana_hwc_rx_event_handler() / mana_hwc_handle_resp() calls complete(&ctx->comp_event) before posting the wqe back. It's possible that other callers, like mana_create_txq(), start the next round of mana_hwc_send_request() before the posting of wqe. And if the HW is fast enough to respond, it can hit no_wqe error on the HW channel, then the response message is lost. The mana driver may fail to create queues and open, because of waiting for the HW response and timed out. Sample dmesg: [ 528.610840] mana 39d4:00:02.0: HWC: Request timed out! [ 528.614452] mana 39d4:00:02.0: Failed to send mana message: -110, 0x0 [ 528.618326] mana 39d4:00:02.0 enP14804s2: Failed to create WQ object: -110 To fix it, move posting of rx wqe before complete(&ctx->comp_event). Cc: stable@vger.kernel.org Fixes: ca9c54d2 ("net: mana: Add a driver for Microsoft Azure Network Adapter (MANA)") Signed-off-by:
Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by:
Long Li <longli@microsoft.com> Signed-off-by:
-
Johannes Berg authored
As we discussed in the room at netdevconf earlier this week, drop the requirement for special comment style for netdev. For checkpatch, the general check accepts both right now, so simply drop the special request there as well. Acked-by:
Stephen Hemminger <stephen@networkplumber.org> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Acked-by:
-
Eric Dumazet authored
I have seen the WARN_ON(smp_processor_id() != cpu) firing in pktgen_thread_worker() during tests. We must use cpus_read_lock()/cpus_read_unlock() around the for_each_online_cpu(cpu) loop. While we are at it use WARN_ON_ONCE() to avoid a possible syslog flood. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
-
- 22 Aug, 2024 27 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Jakub Kicinski: "Including fixes from bluetooth and netfilter. Current release - regressions: - virtio_net: avoid crash on resume - move netdev_tx_reset_queue() call before RX napi enable Current release - new code bugs: - net/mlx5e: fix page leak and incorrect header release w/ HW GRO Previous releases - regressions: - udp: fix receiving fraglist GSO packets - tcp: prevent refcount underflow due to concurrent execution of tcp_sk_exit_batch() Previous releases - always broken: - ipv6: fix possible UAF when incrementing error counters on output - ip6: tunnel: prevent merging of packets with different L2 - mptcp: pm: fix IDs not being reusable - bonding: fix potential crashes in IPsec offload handling - Bluetooth: HCI: - MGMT: add error handling to pair_device() to avoid a crash - invert LE State quirk to be opt-out rather then opt-in - fix LE quote calculation - drv: dsa: VLAN fixes for Ocelot driver - drv: igb: cope with large MAX_SKB_FRAGS Kconfig settings - drv: ice: fi Rx data path on architectures with PAGE_SIZE >= 8192 Misc: - netpoll: do not export netpoll_poll_[disable|enable]() - MAINTAINERS: update the list of networking headers" * tag 'net-6.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (82 commits) s390/iucv: Fix vargs handling in iucv_alloc_device() net: ovs: fix ovs_drop_reasons error net: xilinx: axienet: Fix dangling multicast addresses net: xilinx: axienet: Always disable promiscuous mode MAINTAINERS: Mark JME Network Driver as Odd Fixes MAINTAINERS: Add header files to NETWORKING sections MAINTAINERS: Add limited globs for Networking headers MAINTAINERS: Add net_tstamp.h to SOCKET TIMESTAMPING section MAINTAINERS: Add sonet.h to ATM section of MAINTAINERS octeontx2-af: Fix CPT AF register offset calculation net: phy: realtek: Fix setting of PHY LEDs Mode B bit on RTL8211F net: ngbe: Fix phy mode set to external phy netfilter: flowtable: validate vlan header bnxt_en: Fix double DMA unmapping for XDP_REDIRECT ipv6: prevent possible UAF in ip6_xmit() ipv6: fix possible UAF in ip6_finish_output2() ipv6: prevent UAF in ip6_send_skb() netpoll: do not export netpoll_poll_[disable|enable]() selftests: mlxsw: ethtool_lanes: Source ethtool lib from correct path udp: fix receiving fraglist GSO packets ... -
Linus Torvalds authored
Merge tag 'kbuild-fixes-v6.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Eliminate the fdtoverlay command duplication in scripts/Makefile.lib - Fix 'make compile_commands.json' for external modules - Ensure scripts/kconfig/merge_config.sh handles missing newlines - Fix some build errors on macOS * tag 'kbuild-fixes-v6.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: fix typos "prequisites" to "prerequisites" Documentation/llvm: turn make command for ccache into code block kbuild: avoid scripts/kallsyms parsing /dev/null treewide: remove unnecessary <linux/version.h> inclusion scripts: kconfig: merge_config: config files: add a trailing newline Makefile: add $(srctree) to dependency of compile_commands.json target kbuild: clean up code duplication in cmd_fdtoverlay
-
Alexandra Winter authored
iucv_alloc_device() gets a format string and a varying number of arguments. This is incorrectly forwarded by calling dev_set_name() with the format string and a va_list, while dev_set_name() expects also a varying number of arguments. Symptoms: Corrupted iucv device names, which can result in log messages like: sysfs: cannot create duplicate filename '/devices/iucv/hvc_iucv1827699952' Fixes: 4452e8ef ("s390/iucv: Provide iucv_alloc_device() / iucv_release_device()") Link: https://bugzilla.suse.com/show_bug.cgi?id=1228425Signed-off-by:
Alexandra Winter <wintera@linux.ibm.com> Reviewed-by:
Thorsten Winkler <twinkler@linux.ibm.com> Reviewed-by:
Przemek Kitszel <przemyslaw.kitszel@intel.com> Link: https://patch.msgid.link/20240821091337.3627068-1-wintera@linux.ibm.comSigned-off-by:
-
Menglong Dong authored
There is something wrong with ovs_drop_reasons. ovs_drop_reasons[0] is "OVS_DROP_LAST_ACTION", but OVS_DROP_LAST_ACTION == __OVS_DROP_REASON + 1, which means that ovs_drop_reasons[1] should be "OVS_DROP_LAST_ACTION". And as Adrian tested, without the patch, adding flow to drop packets results in: drop at: do_execute_actions+0x197/0xb20 [openvsw (0xffffffffc0db6f97) origin: software input port ifindex: 8 timestamp: Tue Aug 20 10:19:17 2024 859853461 nsec protocol: 0x800 length: 98 original length: 98 drop reason: OVS_DROP_ACTION_ERROR With the patch, the same results in: drop at: do_execute_actions+0x197/0xb20 [openvsw (0xffffffffc0db6f97) origin: software input port ifindex: 8 timestamp: Tue Aug 20 10:16:13 2024 475856608 nsec protocol: 0x800 length: 98 original length: 98 drop reason: OVS_DROP_LAST_ACTION Fix this by initializing ovs_drop_reasons with index. Fixes: 9d802da4 ("net: openvswitch: add last-action drop reason") Signed-off-by:
Menglong Dong <dongml2@chinatelecom.cn> Tested-by:
Adrian Moreno <amorenoz@redhat.com> Reviewed-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nfJakub Kicinski authored
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: Patch #1 disable BH when collecting stats via hardware offload to ensure concurrent updates from packet path do not result in losing stats. From Sebastian Andrzej Siewior. Patch #2 uses write seqcount to reset counters serialize against reader. Also from Sebastian Andrzej Siewior. Patch #3 ensures vlan header is in place before accessing its fields, according to KMSAN splat triggered by syzbot. * tag 'nf-24-08-22' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: netfilter: flowtable: validate vlan header netfilter: nft_counter: Synchronize nft_counter_reset() against reader. netfilter: nft_counter: Disable BH in nft_counter_offload_stats(). ==================== Link: https://patch.msgid.link/20240822101842.4234-1-pablo@netfilter.orgSigned-off-by: -
Jakub Kicinski authored
Sean Anderson says: ==================== net: xilinx: axienet: Multicast fixes and improvements [part] ==================== First two patches of the series which are fixes. Link: https://patch.msgid.link/20240822154059.1066595-1-sean.anderson@linux.devSigned-off-by:
-
Sean Anderson authored
If a multicast address is removed but there are still some multicast addresses, that address would remain programmed into the frame filter. Fix this by explicitly setting the enable bit for each filter. Fixes: 8a3b7a25 ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver") Signed-off-by:
Sean Anderson <sean.anderson@linux.dev> Reviewed-by:
-
Sean Anderson authored
If promiscuous mode is disabled when there are fewer than four multicast addresses, then it will not be reflected in the hardware. Fix this by always clearing the promiscuous mode flag even when we program multicast addresses. Fixes: 8a3b7a25 ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver") Signed-off-by:
-
Masahiro Yamada authored
This typo in scripts/Makefile.build has been present for more than 20 years. It was accidentally copy-pasted to other scripts/Makefile.* files. Fix them all. Signed-off-by:
Masahiro Yamada <masahiroy@kernel.org> Reviewed-by:
Nathan Chancellor <nathan@kernel.org>
-
Paolo Abeni authored
Simon Horman says: ==================== MAINTAINERS: Networking updates This series includes Networking-related updates to MAINTAINERS. * Patches 1-4 aim to assign header files with "*net*' and '*skbuff*' in their name to Networking-related sections within Maintainers. There are a few such files left over after this patches. I have to sent separate patches to add them to SCSI SUBSYSTEM and NETWORKING DRIVERS (WIRELESS) sections [1][2]. [1] https://lore.kernel.org/linux-scsi/20240816-scsi-mnt-v1-1-439af8b1c28b@kernel.org/ [2] https://lore.kernel.org/linux-wireless/20240816-wifi-mnt-v1-1-3fb3bf5d44aa@kernel.org/ * Patch 5 updates the status of the JME driver to 'Odd Fixes' ==================== Link: https://patch.msgid.link/20240821-net-mnt-v2-0-59a5af38e69d@kernel.orgSigned-off-by:
-
Simon Horman authored
This driver only appears to have received sporadic clean-ups, typically part of some tree-wide activity, and fixes for quite some time. And according to the maintainer, Guo-Fu Tseng, the device has been EOLed for a long time (see Link). Accordingly, it seems appropriate to mark this driver as odd fixes. Cc: Moon Yeounsu <yyyynoom@gmail.com> Cc: Guo-Fu Tseng <cooldavid@cooldavid.org> Link: https://lore.kernel.org/netdev/20240805003139.M94125@cooldavid.org/Signed-off-by:
-
Simon Horman authored
This is part of an effort to assign a section in MAINTAINERS to header files that relate to Networking. In this case the files with "net" or "skbuff" in their name. This patch adds a number of such files to the NETWORKING DRIVERS and NETWORKING [GENERAL] sections. Signed-off-by:
-
Simon Horman authored
This aims to add limited globs to improve the coverage of header files in the NETWORKING DRIVERS and NETWORKING [GENERAL] sections. It is done so in a minimal way to exclude overlap with other sections. And so as not to require "X" entries to exclude files otherwise matched by these new globs. While imperfect, due to it's limited nature, this does extend coverage of header files by these sections. And aims to automatically cover new files that seem very likely belong to these sections. The include/linux/netdev* glob (both sections) + Subsumes the entries for: - include/linux/netdevice.h + Extends the sections to cover - include/linux/netdevice_xmit.h - include/linux/netdev_features.h The include/uapi/linux/netdev* globs: (both sections) + Subsumes the entries for: - include/linux/netdevice.h + Extends the sections to cover - include/linux/netdev.h The include/linux/skbuff* glob (NETWORKING [GENERAL] section only): + Subsumes the entry for: - include/linux/skbuff.h + Extends the section to cover - include/linux/skbuff_ref.h A include/uapi/linux/net_* glob was not added to the NETWORKING [GENERAL] section. Although it would subsume the entry for include/uapi/linux/net_namespace.h, which is fine, it would also extend coverage to: - include/uapi/linux/net_dropmon.h, which belongs to the NETWORK DROP MONITOR section - include/uapi/linux/net_tstamp.h which, as per an earlier patch in this series, belongs to the SOCKET TIMESTAMPING section Signed-off-by:
-
Simon Horman authored
This is part of an effort to assign a section in MAINTAINERS to header files that relate to Networking. In this case the files with "net" in their name. Cc: Richard Cochran <richardcochran@gmail.com> Cc: Willem de Bruijn <willemdebruijn.kernel@gmail.com> Signed-off-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
-
Simon Horman authored
This is part of an effort to assign a section in MAINTAINERS to header files that relate to Networking. In this case the files with "net" in their name. It seems that sonet.h is included in ATM related source files, and thus that ATM is the most relevant section for these files. Cc: Chas Williams <3chas3@gmail.com> Signed-off-by:
-
Bharat Bhushan authored
Some CPT AF registers are per LF and others are global. Translation of PF/VF local LF slot number to actual LF slot number is required only for accessing perf LF registers. CPT AF global registers access do not require any LF slot number. Also, there is no reason CPT PF/VF to know actual lf's register offset. Without this fix microcode loading will fail, VFs cannot be created and hardware is not usable. Fixes: bc35e28a ("octeontx2-af: replace cpt slot with lf id on reg write") Signed-off-by:
Bharat Bhushan <bbhushan2@marvell.com> Reviewed-by:
-
Sava Jakovljev authored
The current implementation incorrectly sets the mode bit of the PHY chip. Bit 15 (RTL8211F_LEDCR_MODE) should not be shifted together with the configuration nibble of a LED- it should be set independently of the index of the LED being configured. As a consequence, the RTL8211F LED control is actually operating in Mode A. Fix the error by or-ing final register value to write with a const-value of RTL8211F_LEDCR_MODE, thus setting Mode bit explicitly. Fixes: 17784801 ("net: phy: realtek: Add support for PHY LEDs on RTL8211F") Signed-off-by:
Sava Jakovljev <savaj@meyersound.com> Reviewed-by:
Marek Vasut <marex@denx.de> Link: https://patch.msgid.link/PAWP192MB21287372F30C4E55B6DF6158C38E2@PAWP192MB2128.EURP192.PROD.OUTLOOK.COMSigned-off-by:
-
Mengyuan Lou authored
The MAC only has add the TX delay and it can not be modified. MAC and PHY are both set the TX delay cause transmission problems. So just disable TX delay in PHY, when use rgmii to attach to external phy, set PHY_INTERFACE_MODE_RGMII_RXID to phy drivers. And it is does not matter to internal phy. Fixes: bc2426d7 ("net: ngbe: convert phylib to phylink") Signed-off-by:
Mengyuan Lou <mengyuanlou@net-swift.com> Cc: stable@vger.kernel.org # 6.3+ Reviewed-by:
Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/E6759CF1387CF84C+20240820030425.93003-1-mengyuanlou@net-swift.comSigned-off-by:
-
Pablo Neira Ayuso authored
Ensure there is sufficient room to access the protocol field of the VLAN header, validate it once before the flowtable lookup. ===================================================== BUG: KMSAN: uninit-value in nf_flow_offload_inet_hook+0x45a/0x5f0 net/netfilter/nf_flow_table_inet.c:32 nf_flow_offload_inet_hook+0x45a/0x5f0 net/netfilter/nf_flow_table_inet.c:32 nf_hook_entry_hookfn include/linux/netfilter.h:154 [inline] nf_hook_slow+0xf4/0x400 net/netfilter/core.c:626 nf_hook_ingress include/linux/netfilter_netdev.h:34 [inline] nf_ingress net/core/dev.c:5440 [inline] Fixes: 4cd91f7c ("netfilter: flowtable: add vlan support") Reported-by: syzbot+8407d9bb88cd4c6bf61a@syzkaller.appspotmail.com Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queueJakub Kicinski authored
Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2024-08-20 (ice) This series contains updates to ice driver only. Maciej fixes issues with Rx data path on architectures with PAGE_SIZE >= 8192; correcting page reuse usage and calculations for last offset and truesize. Michal corrects assignment of devlink port number to use PF id. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: ice: use internal pf id instead of function number ice: fix truesize operations for PAGE_SIZE >= 8192 ice: fix ICE_LAST_OFFSET formula ice: fix page reuse when PAGE_SIZE is over 8k ==================== Link: https://patch.msgid.link/20240820215620.1245310-1-anthony.l.nguyen@intel.comSigned-off-by:
-
Somnath Kotur authored
Remove the dma_unmap_page_attrs() call in the driver's XDP_REDIRECT code path. This should have been removed when we let the page pool handle the DMA mapping. This bug causes the warning: WARNING: CPU: 7 PID: 59 at drivers/iommu/dma-iommu.c:1198 iommu_dma_unmap_page+0xd5/0x100 CPU: 7 PID: 59 Comm: ksoftirqd/7 Tainted: G W 6.8.0-1010-gcp #11-Ubuntu Hardware name: Dell Inc. PowerEdge R7525/0PYVT1, BIOS 2.15.2 04/02/2024 RIP: 0010:iommu_dma_unmap_page+0xd5/0x100 Code: 89 ee 48 89 df e8 cb f2 69 ff 48 83 c4 08 5b 41 5c 41 5d 41 5e 41 5f 5d 31 c0 31 d2 31 c9 31 f6 31 ff 45 31 c0 e9 ab 17 71 00 <0f> 0b 48 83 c4 08 5b 41 5c 41 5d 41 5e 41 5f 5d 31 c0 31 d2 31 c9 RSP: 0018:ffffab1fc0597a48 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff99ff838280c8 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffffab1fc0597a78 R08: 0000000000000002 R09: ffffab1fc0597c1c R10: ffffab1fc0597cd3 R11: ffff99ffe375acd8 R12: 00000000e65b9000 R13: 0000000000000050 R14: 0000000000001000 R15: 0000000000000002 FS: 0000000000000000(0000) GS:ffff9a06efb80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000565c34c37210 CR3: 00000005c7e3e000 CR4: 0000000000350ef0 ? show_regs+0x6d/0x80 ? __warn+0x89/0x150 ? iommu_dma_unmap_page+0xd5/0x100 ? report_bug+0x16a/0x190 ? handle_bug+0x51/0xa0 ? exc_invalid_op+0x18/0x80 ? iommu_dma_unmap_page+0xd5/0x100 ? iommu_dma_unmap_page+0x35/0x100 dma_unmap_page_attrs+0x55/0x220 ? bpf_prog_4d7e87c0d30db711_xdp_dispatcher+0x64/0x9f bnxt_rx_xdp+0x237/0x520 [bnxt_en] bnxt_rx_pkt+0x640/0xdd0 [bnxt_en] __bnxt_poll_work+0x1a1/0x3d0 [bnxt_en] bnxt_poll+0xaa/0x1e0 [bnxt_en] __napi_poll+0x33/0x1e0 net_rx_action+0x18a/0x2f0 Fixes: 578fcfd2 ("bnxt_en: Let the page pool manage the DMA mapping") Reviewed-by:
Andy Gospodarek <andrew.gospodarek@broadcom.com> Reviewed-by:
Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by:
Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Reviewed-by:
-
Jakub Kicinski authored
Eric Dumazet says: ==================== ipv6: fix possible UAF in output paths First patch fixes an issue spotted by syzbot, and the two other patches fix error paths after skb_expand_head() adoption. ==================== Link: https://patch.msgid.link/20240820160859.3786976-1-edumazet@google.comSigned-off-by:
-
Eric Dumazet authored
If skb_expand_head() returns NULL, skb has been freed and the associated dst/idev could also have been freed. We must use rcu_read_lock() to prevent a possible UAF. Fixes: 0c9f227b ("ipv6: use skb_expand_head in ip6_xmit") Signed-off-by:
David Ahern <dsahern@kernel.org> Link: https://patch.msgid.link/20240820160859.3786976-4-edumazet@google.comSigned-off-by:
-
Eric Dumazet authored
If skb_expand_head() returns NULL, skb has been freed and associated dst/idev could also have been freed. We need to hold rcu_read_lock() to make sure the dst and associated idev are alive. Fixes: 5796015f ("ipv6: allocate enough headroom in ip6_finish_output2()") Signed-off-by:
-
Eric Dumazet authored
syzbot reported an UAF in ip6_send_skb() [1] After ip6_local_out() has returned, we no longer can safely dereference rt, unless we hold rcu_read_lock(). A similar issue has been fixed in commit a688caa3 ("ipv6: take rcu lock in rawv6_send_hdrinc()") Another potential issue in ip6_finish_output2() is handled in a separate patch. [1] BUG: KASAN: slab-use-after-free in ip6_send_skb+0x18d/0x230 net/ipv6/ip6_output.c:1964 Read of size 8 at addr ffff88806dde4858 by task syz.1.380/6530 CPU: 1 UID: 0 PID: 6530 Comm: syz.1.380 Not tainted 6.11.0-rc3-syzkaller-00306-gdf6cbc62 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024 Call Trace: <TASK> __dump_stack lib/dump_stack.c:93 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:119 print_address_description mm/kasan/report.c:377 [inline] print_report+0x169/0x550 mm/kasan/report.c:488 kasan_report+0x143/0x180 mm/kasan/report.c:601 ip6_send_skb+0x18d/0x230 net/ipv6/ip6_output.c:1964 rawv6_push_pending_frames+0x75c/0x9e0 net/ipv6/raw.c:588 rawv6_sendmsg+0x19c7/0x23c0 net/ipv6/raw.c:926 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x1a6/0x270 net/socket.c:745 sock_write_iter+0x2dd/0x400 net/socket.c:1160 do_iter_readv_writev+0x60a/0x890 vfs_writev+0x37c/0xbb0 fs/read_write.c:971 do_writev+0x1b1/0x350 fs/read_write.c:1018 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f936bf79e79 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f936cd7f038 EFLAGS: 00000246 ORIG_RAX: 0000000000000014 RAX: ffffffffffffffda RBX: 00007f936c115f80 RCX: 00007f936bf79e79 RDX: 0000000000000001 RSI: 0000000020000040 RDI: 0000000000000004 RBP: 00007f936bfe7916 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000000 R14: 00007f936c115f80 R15: 00007fff2860a7a8 </TASK> Allocated by task 6530: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3f/0x80 mm/kasan/common.c:68 unpoison_slab_object mm/kasan/common.c:312 [inline] __kasan_slab_alloc+0x66/0x80 mm/kasan/common.c:338 kasan_slab_alloc include/linux/kasan.h:201 [inline] slab_post_alloc_hook mm/slub.c:3988 [inline] slab_alloc_node mm/slub.c:4037 [inline] kmem_cache_alloc_noprof+0x135/0x2a0 mm/slub.c:4044 dst_alloc+0x12b/0x190 net/core/dst.c:89 ip6_blackhole_route+0x59/0x340 net/ipv6/route.c:2670 make_blackhole net/xfrm/xfrm_policy.c:3120 [inline] xfrm_lookup_route+0xd1/0x1c0 net/xfrm/xfrm_policy.c:3313 ip6_dst_lookup_flow+0x13e/0x180 net/ipv6/ip6_output.c:1257 rawv6_sendmsg+0x1283/0x23c0 net/ipv6/raw.c:898 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x1a6/0x270 net/socket.c:745 ____sys_sendmsg+0x525/0x7d0 net/socket.c:2597 ___sys_sendmsg net/socket.c:2651 [inline] __sys_sendmsg+0x2b0/0x3a0 net/socket.c:2680 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 45: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3f/0x80 mm/kasan/common.c:68 kasan_save_free_info+0x40/0x50 mm/kasan/generic.c:579 poison_slab_object+0xe0/0x150 mm/kasan/common.c:240 __kasan_slab_free+0x37/0x60 mm/kasan/common.c:256 kasan_slab_free include/linux/kasan.h:184 [inline] slab_free_hook mm/slub.c:2252 [inline] slab_free mm/slub.c:4473 [inline] kmem_cache_free+0x145/0x350 mm/slub.c:4548 dst_destroy+0x2ac/0x460 net/core/dst.c:124 rcu_do_batch kernel/rcu/tree.c:2569 [inline] rcu_core+0xafd/0x1830 kernel/rcu/tree.c:2843 handle_softirqs+0x2c4/0x970 kernel/softirq.c:554 __do_softirq kernel/softirq.c:588 [inline] invoke_softirq kernel/softirq.c:428 [inline] __irq_exit_rcu+0xf4/0x1c0 kernel/softirq.c:637 irq_exit_rcu+0x9/0x30 kernel/softirq.c:649 instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1043 [inline] sysvec_apic_timer_interrupt+0xa6/0xc0 arch/x86/kernel/apic/apic.c:1043 asm_sysvec_apic_timer_interrupt+0x1a/0x20 arch/x86/include/asm/idtentry.h:702 Last potentially related work creation: kasan_save_stack+0x3f/0x60 mm/kasan/common.c:47 __kasan_record_aux_stack+0xac/0xc0 mm/kasan/generic.c:541 __call_rcu_common kernel/rcu/tree.c:3106 [inline] call_rcu+0x167/0xa70 kernel/rcu/tree.c:3210 refdst_drop include/net/dst.h:263 [inline] skb_dst_drop include/net/dst.h:275 [inline] nf_ct_frag6_queue net/ipv6/netfilter/nf_conntrack_reasm.c:306 [inline] nf_ct_frag6_gather+0xb9a/0x2080 net/ipv6/netfilter/nf_conntrack_reasm.c:485 ipv6_defrag+0x2c8/0x3c0 net/ipv6/netfilter/nf_defrag_ipv6_hooks.c:67 nf_hook_entry_hookfn include/linux/netfilter.h:154 [inline] nf_hook_slow+0xc3/0x220 net/netfilter/core.c:626 nf_hook include/linux/netfilter.h:269 [inline] __ip6_local_out+0x6fa/0x800 net/ipv6/output_core.c:143 ip6_local_out+0x26/0x70 net/ipv6/output_core.c:153 ip6_send_skb+0x112/0x230 net/ipv6/ip6_output.c:1959 rawv6_push_pending_frames+0x75c/0x9e0 net/ipv6/raw.c:588 rawv6_sendmsg+0x19c7/0x23c0 net/ipv6/raw.c:926 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x1a6/0x270 net/socket.c:745 sock_write_iter+0x2dd/0x400 net/socket.c:1160 do_iter_readv_writev+0x60a/0x890 Fixes: 06254914 ("ipv6: ip6_push_pending_frames() should increment IPSTATS_MIB_OUTDISCARDS") Signed-off-by:
syzbot <syzkaller@googlegroups.com> Reviewed-by:
-
Eric Dumazet authored
netpoll_poll_disable() and netpoll_poll_enable() are only used from core networking code, there is no need to export them. Signed-off-by:
-
Ido Schimmel authored
Source the ethtool library from the correct path and avoid the following error: ./ethtool_lanes.sh: line 14: ./../../../net/forwarding/ethtool_lib.sh: No such file or directory Fixes: 40d269c0 ("selftests: forwarding: Move several selftests") Signed-off-by:
Ido Schimmel <idosch@nvidia.com> Signed-off-by:
-
