- 04 Oct, 2023 7 commits
-
-
Michel Dänzer authored
Cleanup, no functional change intended. Signed-off-by:
Michel Dänzer <mdaenzer@redhat.com> Signed-off-by:
Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Rajneesh Bhardwaj authored
On GFXIP9.4.3 APU, allow the memory reporting as per the ttm pages limit in NPS1 mode. Reviewed-by:
Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by:
Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com> Signed-off-by:
-
Rajneesh Bhardwaj authored
To allow bigger allocations specially on systems such as GFXIP 9.4.3 that use GTT memory for VRAM allocations, relax the limits to maximize ROCm allocations. Reviewed-by:
-
Alex Deucher authored
Needed to avoid a hardware issue. v2: force high for all GC11 parts for consistency (Alex) v3: rebase Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
Alex Deucher authored
We normally place GART based on the location of VRAM and the available address space around that, but provide an option to force a particular location for hardware that needs it. v2: Switch to passing the placement via parameter Reviewed-by:
-
Wayne Lin authored
[Why & How] Fix following problems: - In abm config, forget to initialize config.ambient_thresholds_lux. - Adjust the coding style problem - Restrict to call psr_su_set_dsc_slice_height() under edp only Reviewed-by:
Robin Chen <robin.chen@amd.com> Signed-off-by:
Wayne Lin <Wayne.Lin@amd.com> Tested-by:
Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by:
-
Lang Yu authored
Cayn skilfish uses SMUIO v11.0.8 offset. Signed-off-by:
Lang Yu <Lang.Yu@amd.com> Reviewed-by:
Aaron Liu <aaron.liu@amd.com> Signed-off-by:
-
- 03 Oct, 2023 20 commits
-
-
Mario Limonciello authored
On some systems with Navi3x dGPU will attempt to use BACO for runtime PM but fails to resume properly. This is because on these systems the root port goes into D3cold which is incompatible with BACO. This happens because in this case dGPU is connected to a bridge between root port which causes BOCO detection logic to fail. Fix the intent of the logic by looking at root port, not the immediate upstream bridge for _PR3. Cc: stable@vger.kernel.org Suggested-by:
Jun Ma <Jun.Ma2@amd.com> Tested-by:
David Perry <David.Perry@amd.com> Fixes: b10c1c5b ("drm/amdgpu: add check for ACPI power resources") Signed-off-by:
Mario Limonciello <mario.limonciello@amd.com> Reviewed-by:
-
Mario Limonciello authored
While aligning SMU11 with SMU13 implementation an assumption was made that `dpm_context->dpm_tables.pcie_table` was populated in dpm table initialization like in SMU13 but it isn't. So restore some of the original logic and instead just check for amdgpu_device_pcie_dynamic_switching_supported() to decide whether to hardcode values; erring on the side of performance. Cc: stable@vger.kernel.org # 6.1+ Reported-and-tested-by:
Umio Yasuno <coelacanth_dream@protonmail.com> Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/1447#note_2101382 Fixes: e701156c ("drm/amd: Align SMU11 SMU_MSG_OverridePcieParameters implementation with SMU13") Signed-off-by:
-
Alex Hung authored
[WHY] drm_writeback requires to capture exact one frame in each writeback call. [HOW] frame_capture is disabled after each writeback is completed. Reviewed-by:
Harry Wentland <harry.wentland@amd.com> Signed-off-by:
Alex Hung <alex.hung@amd.com> Signed-off-by:
-
Alex Hung authored
[WHAT] Add a function to enable and disable DWB's frame captures. Reviewed-by:
-
Alex Hung authored
[WHY] Hardware may require different warmup approaches - big buffer or individual buffers. [HOW] Setup warmup for big buffer when it is required by specific hardware. Reviewed-by:
-
Alex Hung authored
[WHAT] Add a new field to keep track whether a crtc is previously writeback-enabled. Reviewed-by:
-
Alex Hung authored
[WHY] Counter j was not updated to present the num of writeback_info when writeback pipes are removed. [HOW] update j (num of writeback info) under the correct condition. Reviewed-by:
-
Alex Hung authored
[WHAT] hw_points_num is 0 before ogam LUT is programmed; however, function "dwb3_program_ogam_pwl" assumes hw_points_num is always greater than 0, i.e. substracting it by 1 as an array index. [HOW] Check hw_points_num is not equal to 0 before using it. Reviewed-by:
-
Alex Hung authored
[WHY] wb_enabled field is set to false before it is used, and the following code will never be executed. [HOW] Setting wb_enable to false after all removal work is completed. Reviewed-by:
-
Alex Hung authored
[WHAT] The enable and disable writeback calls need to be included in the coressponding functions in dc_stream. Reviewed-by:
-
Alex Hung authored
[WHAT] Handle writeback requests and fill in the required information for DWB programming and setup. Reviewed-by:
-
Harry Wentland authored
[WHAT] Writeback connectors don't have a physical sink but DC still needs a sink to function. Create a fake sink and stream for writeback connectors Reviewed-by:
-
Harry Wentland authored
[WHY] We need to track the dc_link and it would get confusing if re-using the amdgpu_dm_connector. [HOW] Creating new amdgpu_dm_wb_connector. Reviewed-by:
-
Harry Wentland authored
[WHAT] Again, we need to use this function for writeback connectors, which are not of type amdgpu_dm_connector. Use the common base drm_connector instead. Reviewed-by:
-
Srinivasan Shanmugam authored
Fixes the following: drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:3928: warning: Function parameter or member 'srf_updates' not described in 'could_mpcc_tree_change_for_active_pipes' Cc: Harry Wentland <harry.wentland@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Acked-by:
-
Dan Carpenter authored
"ret" was checked earlier inside the loop, so we know it is zero here. No need to check a second time. Reviewed-by:
Yang Wang <kevinyang.wang@amd.com> Signed-off-by:
Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by:
-
Harry Wentland authored
[WHAT] We need to use this function for both amdgpu_dm_connectors and drm_writeback_connectors. Modify it to operate on a drm_connector as a common base. Reviewed-by:
-
Alex Deucher authored
I think this was an abstraction back from when kfd supported both radeon and amdgpu. Since we just support amdgpu now, there is no more need for this and we can use the amdgpu structures directly. This also avoids having the kfd_cu_info structures on the stack when inlining which can blow up the stack. Cc: Arnd Bergmann <arnd@kernel.org> Acked-by:
Arnd Bergmann <arnd@arndb.de> Reviewed-by:
-
Harry Wentland authored
[WHY] We will be dealing with two types of connector: amdgpu_dm_connector and drm_writeback_connector. [HOW] We want to find both and then cast to the appriopriate type afterwards. Reviewed-by:
-
Alex Deucher authored
kfd_topology.c:2082:1: warning: the frame size of 1440 bytes is larger than 1024 bytes Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2866 Cc: Arnd Bergmann <arnd@kernel.org> Acked-by:
-
- 28 Sep, 2023 13 commits
-
-
Tao Zhou authored
Increase the retry loops and replace the constant number with macro. Signed-off-by:
Tao Zhou <tao.zhou1@amd.com> Reviewed-by:
Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by:
-
Harry Wentland authored
[WHY] Writeback connectors are based on a different object: drm_writeback_connector, and are therefore different from amdgpu_dm_connector. We need to be careful to ensure code designed for amdgpu_dm_connector doesn't inadvertently try to operate on a drm_writeback_connector. [HOW] Skip them when connector type is DRM_MODE_CONNECTOR_WRITEBACK. Reviewed-by:
-
Tao Zhou authored
No need to perform the full reset operation in case of gpu reset failure. Signed-off-by:
-
Victor Zhao authored
disable pp_power_profile_mode for sriov on gc11.0.3 as not supported by smu Signed-off-by:
Victor Zhao <Victor.Zhao@amd.com> Acked-by:
-
Xiaogang Chen authored
prange->svm_bo unref can happen in both mmu callback and a callback after migrate to system ram. Both are async call in different tasks. Sync svm_bo unref operation to avoid random "use-after-free". Signed-off-by:
Xiaogang Chen <xiaogang.chen@amd.com> Reviewed-by:
Philip Yang <Philip.Yang@amd.com> Reviewed-by:
Jesse Zhang <Jesse.Zhang@amd.com> Tested-by:
-
Michel Dänzer authored
It was only checking planes which had any state changes in the same commit. However, it also needs to check other enabled planes. Not doing this meant that a commit might spuriously "succeed", resulting in the cursor plane displaying with incorrect scaling. See https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3177#note_1824263 for an example. Fixes: d1bfbe8a ("amd/display: check cursor plane matches underlying plane") Reviewed-by:
-
Alex Hung authored
[WHAT] Create a drm_writeback_connector when connector signal equals SIGNAL_TYPE_VIRTUAL. Reviewed-by:
-
Mario Limonciello authored
As part of IP discovery early_init is run for all HW IP blocks. During this phase all firmware is supposed to be identified that may be missing so that the driver can avoid releasing resources used by the EFI framebuffer or simpledrm until the last possible moment. Move microcode loading from sw_init to early_init. Signed-off-by:
-
Mario Limonciello authored
As part of IP discovery early_init is run for all HW IP blocks. During this phase all firmware is supposed to be identified that may be missing so that the driver can avoid releasing resources used by the EFI framebuffer or simpledrm until the last possible moment. Move microcode loading from sw_init to early_init. Signed-off-by:
-
Mario Limonciello authored
As part of IP discovery early_init is run for all HW IP blocks. During this phase all firmware is supposed to be identified that may be missing so that the driver can avoid releasing resources used by the EFI framebuffer or simpledrm until the last possible moment. Move microcode loading from sw_init to early_init. Signed-off-by:
-
Mario Limonciello authored
As part of IP discovery early_init is run for all HW IP blocks. During this phase all firmware is supposed to be identified that may be missing so that the driver can avoid releasing resources used by the EFI framebuffer or simpledrm until the last possible moment. Move microcode loading from sw_init to early_init. Signed-off-by:
-
Mario Limonciello authored
As part of IP discovery early_init is run for all HW IP blocks. During this phase all firmware is supposed to be identified that may be missing so that the driver can avoid releasing resources used by the EFI framebuffer or simpledrm until the last possible moment. Move microcode loading from sw_init to early_init. Signed-off-by:
-
Mario Limonciello authored
As part of IP discovery early_init is run for all HW IP blocks. During this phase all firmware is supposed to be identified that may be missing so that the driver can avoid releasing resources used by the EFI framebuffer or simpledrm until the last possible moment. Move microcode loading from sw_init to early_init. Signed-off-by:
-
