Since commit 571e31fa ("spi: bcm2835: Cache CS register value for
->prepare_message()"), the number of slaves has been limited by a
compile-time constant.  This was necessitated by statically-sized
arrays in the driver private data which contain per-slave register
values.

As suggested by Mark, move those register values to a per-slave
controller_state which is allocated on ->setup and freed on ->cleanup.
The limitation on the number of slaves is thus lifted.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: Joe Burmeister <joe.burmeister@devtank.co.uk>
Cc: Phil Elwell <phil@raspberrypi.com>
Link: https://lore.kernel.org/r/a847c01f09400801e74e0630bf5a0197591554da.1622150204.git.lukas@wunner.deSigned-off-by: Mark Brown <broonie@kernel.org>

Merge branch 'for-5.13' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi into spi-5.14

Commit c7299fea ("spi: Fix spi device unregister flow") changed the
SPI core's behavior if the ->setup() hook returns an error upon adding
an spi_device:  Before, the ->cleanup() hook was invoked to free any
allocations that were made by ->setup().  With the commit, that's no
longer the case, so the ->setup() hook is expected to free the
allocations itself.

I've identified 5 drivers which depend on the old behavior and am fixing
them up hereinafter: spi-bitbang.c spi-fsl-spi.c spi-omap-uwire.c
spi-omap2-mcspi.c spi-pxa2xx.c

Importantly, ->setup() is not only invoked on spi_device *addition*:
It may subsequently be called to *change* SPI parameters.  If changing
these SPI parameters fails, freeing memory allocations would be wrong.
That should only be done if the spi_device is finally destroyed.
I am therefore using a bool "initial_setup" in 4 of the affected drivers
to differentiate between the invocation on *adding* the spi_device and
any subsequent invocations: spi-bitbang.c spi-fsl-spi.c spi-omap-uwire.c
spi-omap2-mcspi.c

In spi-pxa2xx.c, it seems the ->setup() hook can only fail on spi_device
addition, not any subsequent calls.  It therefore doesn't need the bool.

It's worth noting that 5 other drivers already perform a cleanup if the
->setup() hook fails.  Before c7299fea, they caused a double-free
if ->setup() failed on spi_device addition.  Since the commit, they're
fine.  These drivers are: spi-mpc512x-psc.c spi-pl022.c spi-s3c64xx.c
spi-st-ssc4.c spi-tegra114.c

(spi-pxa2xx.c also already performs a cleanup, but only in one of
several error paths.)

Fixes: c7299fea ("spi: Fix spi device unregister flow")
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: Saravana Kannan <saravanak@google.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> # pxa2xx
Link: https://lore.kernel.org/r/f76a0599469f265b69c371538794101fa37b5536.1622149321.git.lukas@wunner.deSigned-off-by: Mark Brown <broonie@kernel.org>

It is helpful to see what state of CS signal was during one
or another SPI operation. All the same for SPI setup.

Enable tracing of the SPI setup and CS selection.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Message-Id: <20210526195655.75691-1-andriy.shevchenko@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

All chipsets from AR7100 up to QCA9563 have three dedicated chipselect
lines for the integrated SPI controller. Set the number of chipselect
lines available on the controller to this value.
Signed-off-by: David Bauer <mail@david-bauer.net>
Link: https://lore.kernel.org/r/20210522074453.39299-2-mail@david-bauer.netSigned-off-by: Mark Brown <broonie@kernel.org>

The ath79 platform has been converted to pure OF. The platform data is
not needed anymore because of this.
Signed-off-by: David Bauer <mail@david-bauer.net>
Link: https://lore.kernel.org/r/20210522074453.39299-1-mail@david-bauer.netSigned-off-by: Mark Brown <broonie@kernel.org>

Commit 571e31fa ("spi: bcm2835: Cache CS register value for
->prepare_message()") limited the number of slaves to 3 at compile-time.
The limitation was necessitated by a statically-sized array prepare_cs[]
in the driver private data which contains a per-slave register value.

The commit sought to enforce the limitation at run-time by setting the
controller's num_chipselect to 3:  Slaves with a higher chipselect are
rejected by spi_add_device().

However the commit neglected that num_chipselect only limits the number
of *native* chipselects.  If GPIO chipselects are specified in the
device tree for more than 3 slaves, num_chipselect is silently raised by
of_spi_get_gpio_numbers() and the result are out-of-bounds accesses to
the statically-sized array prepare_cs[].

As a bandaid fix which is backportable to stable, raise the number of
allowed slaves to 24 (which "ought to be enough for anybody"), enforce
the limitation on slave ->setup and revert num_chipselect to 3 (which is
the number of native chipselects supported by the controller).
An upcoming for-next commit will allow an arbitrary number of slaves.

Fixes: 571e31fa ("spi: bcm2835: Cache CS register value for ->prepare_message()")
Reported-by: Joe Burmeister <joe.burmeister@devtank.co.uk>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: stable@vger.kernel.org # v5.4+
Cc: Phil Elwell <phil@raspberrypi.com>
Link: https://lore.kernel.org/r/75854affc1923309fde05e47494263bde73e5592.1621703210.git.lukas@wunner.deSigned-off-by: Mark Brown <broonie@kernel.org>

Eliminate the follow smatch warning:

drivers/spi/spi-pxa2xx-pci.c:260 pxa2xx_spi_pci_probe() warn:
inconsistent indenting.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Link: https://lore.kernel.org/r/1621590465-73594-1-git-send-email-jiapeng.chong@linux.alibaba.comSigned-off-by: Mark Brown <broonie@kernel.org>

Allow SPI peripherals attached to this controller to know what is the
maximum transfer size and message size, so they can limit their transfer
lengths properly in case they are otherwise capable of larger transfer
sizes. For the sc18is602, this is 200 bytes in both cases, since as far
as I understand, it isn't possible to tell the controller to keep the
chip select asserted after the STOP command is sent.

The controller can support SPI messages larger than 200 bytes if
cs_change is set for individual transfers such that the portions with
chip select asserted are never longer than 200 bytes. What is not
supported is just SPI messages with a continuous chip select larger than
200. I don't think it is possible to express this using the current API,
so drivers which do send SPI messages with cs_change can safely just
look at the max_transfer_size limit.

An example of user for this is sja1105_xfer() in
drivers/net/dsa/sja1105/sja1105_spi.c which sends by default 64 * 4 =
256 byte transfers.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20210520131238.2903024-3-olteanv@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

For each spi_message, the sc18is602 I2C-to-SPI bridge driver checks the
length of each spi_transfer against 200 (the size of the chip's internal
buffer) minus hw->tlen (the number of bytes transferred so far).

The first byte of the transferred data is the Function ID (the SPI
slave's chip select) and as per the documentation of the chip:
https://www.nxp.com/docs/en/data-sheet/SC18IS602B.pdf
the data buffer is up to 200 bytes deep _without_ accounting for the
Function ID byte.

However, in sc18is602_txrx(), the driver keeps the Function ID as part
of the buffer, and increments hw->tlen from 0 to 1. Combined with the
check in sc18is602_check_transfer, this prevents us from issuing a
transfer that has exactly 200 bytes in size, but only 199.

Adjust the check function to reflect that the Function ID is not part of
the 200 byte deep data buffer.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20210520131238.2903024-2-olteanv@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

This patchset fixes missing parentheses of sizeof reported by checkpatch.pl
under drivers/spi/.

Zhiqi Song (7):
  spi: lm70llp: add parenthesis for sizeof
  spi: mpc512x-psc: add parenthesis for sizeof
  spi: mpc52xx: add parenthesis for sizeof
  spi: mpc52xx-psc: add parenthesis for sizeof
  spi: omap2-mcspi: add parenthesis for sizeof
  spi: omap-uwire: add parenthesis for sizeof
  spi: ppc4xx: add parenthesis for sizeof

 drivers/spi/spi-lm70llp.c     | 2 +-
 drivers/spi/spi-mpc512x-psc.c | 4 ++--
 drivers/spi/spi-mpc52xx-psc.c | 4 ++--
 drivers/spi/spi-mpc52xx.c     | 2 +-
 drivers/spi/spi-omap-uwire.c  | 2 +-
 drivers/spi/spi-omap2-mcspi.c | 2 +-
 drivers/spi/spi-ppc4xx.c      | 4 ++--
 7 files changed, 10 insertions(+), 10 deletions(-)

--
2.7.4

Fix missing parenthesis of sizeof reported by checkpatch.pl:
 WARNING: sizeof *pp should be sizeof(*pp).

The kernel coding style suggests thinking of sizeof as a function
and add parenthesis.
Signed-off-by: Zhiqi Song <songzhiqi1@huawei.com>
Link: https://lore.kernel.org/r/1621301902-64158-8-git-send-email-songzhiqi1@huawei.comSigned-off-by: Mark Brown <broonie@kernel.org>

Fix missing parenthesis of sizeof reported by checkpatch.pl:
 WARNING: sizeof *pp should be sizeof(*pp).

The kernel coding style suggests thinking of sizeof as a function
and add parenthesis.
Signed-off-by: Zhiqi Song <songzhiqi1@huawei.com>
Link: https://lore.kernel.org/r/1621301902-64158-7-git-send-email-songzhiqi1@huawei.comSigned-off-by: Mark Brown <broonie@kernel.org>

Fix missing parenthesis of sizeof reported by checkpatch.pl:
 WARNING: sizeof *pp should be sizeof(*pp).

The kernel coding style suggests thinking of sizeof as a function
and add parenthesis.
Signed-off-by: Zhiqi Song <songzhiqi1@huawei.com>
Link: https://lore.kernel.org/r/1621301902-64158-6-git-send-email-songzhiqi1@huawei.comSigned-off-by: Mark Brown <broonie@kernel.org>

Fix missing parenthesis of sizeof reported by checkpatch.pl:
 WARNING: sizeof *pp should be sizeof(*pp).

The kernel coding style suggests thinking of sizeof as a function
and add parenthesis.
Signed-off-by: Zhiqi Song <songzhiqi1@huawei.com>
Link: https://lore.kernel.org/r/1621301902-64158-5-git-send-email-songzhiqi1@huawei.comSigned-off-by: Mark Brown <broonie@kernel.org>

Fix missing parenthesis of sizeof reported by checkpatch.pl:
 WARNING: sizeof *pp should be sizeof(*pp).

The kernel coding style suggests thinking of sizeof as a function
and add parenthesis.
Signed-off-by: Zhiqi Song <songzhiqi1@huawei.com>
Link: https://lore.kernel.org/r/1621301902-64158-4-git-send-email-songzhiqi1@huawei.comSigned-off-by: Mark Brown <broonie@kernel.org>

Fix missing parenthesis of sizeof reported by checkpatch.pl:
 WARNING: sizeof *pp should be sizeof(*pp).

The kernel coding style suggests thinking of sizeof as a function
and add parenthesis.
Signed-off-by: Zhiqi Song <songzhiqi1@huawei.com>
Link: https://lore.kernel.org/r/1621301902-64158-3-git-send-email-songzhiqi1@huawei.comSigned-off-by: Mark Brown <broonie@kernel.org>

Fix missing parenthesis of sizeof reported by checkpatch.pl:
 WARNING: sizeof *pp should be sizeof(*pp).

The kernel coding style suggests thinking of sizeof as a function
and add parenthesis.

Cc: Kaiwan N Billimoria <kaiwan@designergraphix.com>
Signed-off-by: Zhiqi Song <songzhiqi1@huawei.com>
Link: https://lore.kernel.org/r/1621301902-64158-2-git-send-email-songzhiqi1@huawei.comSigned-off-by: Mark Brown <broonie@kernel.org>

One of the author names got an invalid char, probably due to
a bad charset conversion, being replaced by the
REPLACEMENT CHARACTER U+fffd ('�').

Use the author's e-mail has the characters without accents,
as also used at the .mailmap file.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/ff8d296e1fdcc4f1c6df94434a5720bcedcd0ecf.1621412009.git.mchehab+huawei@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Linux 5.13-rc2

Add Alain Volmat as STM32 SPI maintainer.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Reviewed-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://lore.kernel.org/r/1620796842-23546-1-git-send-email-alain.volmat@foss.st.comSigned-off-by: Mark Brown <broonie@kernel.org>

The predefined mask for threshold modification can be used
in case of Intel Merrifield SPI. Replace open-coded value
with predefined mask when programming FIFO thresholds.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210517140351.901-10-andriy.shevchenko@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Update documentation by pointing out that it's applicable mostly
for a legacy platform. While at it, add couple of points with regard
to ACPI, Device Tree, and automatic DMA enablement.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210517140351.901-9-andriy.shevchenko@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Fix style of the comments and messages along with typos in them.

While at it, update Intel Copyright year.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210517140351.901-8-andriy.shevchenko@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Instead of explicit casting use proper specifier in one case,
and fix specifier signness in another.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210517140351.901-7-andriy.shevchenko@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

In the few places it's redundant to compare against 0.
Drop the unneeded comparisons.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210517140351.901-6-andriy.shevchenko@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

The struct chip_data had been introduced in order to keep the parameters
that may be provided on stack during device allocation. There is no need
to duplicate parameters there, which are carried on by SPI device itself.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210517140351.901-5-andriy.shevchenko@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

SPI core has been already providing the GPIO CS handling. Use it.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210517140351.901-4-andriy.shevchenko@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

SPI core has been already providing the GPIO CS handling. Use it.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210517140351.901-3-andriy.shevchenko@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

SPI core may utilize properties and resources provided by the parent device.
Propagate firmware node to the child SPI controller device for that.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210517140351.901-2-andriy.shevchenko@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

The recent conversion of the common MTD properties to YAML now mandates
a particular node name for SPI flash devices.
Reported-by: Rob Herring <robh@kernel.org>
Signed-off-by: Michael Walle <michael@walle.cc>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210517153946.9502-1-michael@walle.ccSigned-off-by: Mark Brown <broonie@kernel.org>

Merge tag 'driver-core-5.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core fixes from Greg KH:
 "Here are two driver fixes for driver core changes that happened in
  5.13-rc1.

  The clk driver fix resolves a many-reported issue with booting some
  devices, and the USB typec fix resolves the reported problem of USB
  systems on some embedded boards.

  Both of these have been in linux-next this week with no reported
  issues"

* tag 'driver-core-5.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  clk: Skip clk provider registration when np is NULL
  usb: typec: tcpm: Don't block probing of consumers of "connector" nodes

Pull staging and IIO driver fixes from Greg KH:
 "Here are some small IIO driver fixes and one Staging driver fix for
  5.13-rc2.

  Nothing major, just some resolutions for reported problems:

   - gcc-11 bogus warning fix for rtl8723bs

   - iio driver tiny fixes

  All of these have been in linux-next for many days with no reported
  issues"

* tag 'staging-5.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  iio: tsl2583: Fix division by a zero lux_val
  iio: core: return ENODEV if ioctl is unknown
  iio: core: fix ioctl handlers removal
  iio: gyro: mpu3050: Fix reported temperature value
  iio: hid-sensors: select IIO_TRIGGERED_BUFFER under HID_SENSOR_IIO_TRIGGER
  iio: proximity: pulsedlight: Fix rumtime PM imbalance on error
  iio: light: gp2ap002: Fix rumtime PM imbalance on error
  staging: rtl8723bs: avoid bogus gcc warning

Pull USB fixes from Greg KH:
 "Here are some small USB fixes for 5.13-rc2. They consist of a number
  of resolutions for reported issues:

   - typec fixes for found problems

   - xhci fixes and quirk additions

   - dwc3 driver fixes

   - minor fixes found by Coverity

   - cdc-wdm fixes for reported problems

  All of these have been in linux-next for a few days with no reported
  issues"

* tag 'usb-5.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (28 commits)
  usb: core: hub: fix race condition about TRSMRCY of resume
  usb: typec: tcpm: Fix SINK_DISCOVERY current limit for Rp-default
  xhci: Add reset resume quirk for AMD xhci controller.
  usb: xhci: Increase timeout for HC halt
  xhci: Do not use GFP_KERNEL in (potentially) atomic context
  xhci: Fix giving back cancelled URBs even if halted endpoint can't reset
  xhci-pci: Allow host runtime PM as default for Intel Alder Lake xHCI
  usb: musb: Fix an error message
  usb: typec: tcpm: Fix wrong handling for Not_Supported in VDM AMS
  usb: typec: tcpm: Send DISCOVER_IDENTITY from dedicated work
  usb: typec: ucsi: Retrieve all the PDOs instead of just the first 4
  usb: fotg210-hcd: Fix an error message
  docs: usb: function: Modify path name
  usb: dwc3: omap: improve extcon initialization
  usb: typec: ucsi: Put fwnode in any case during ->probe()
  usb: typec: tcpm: Fix wrong handling in GET_SINK_CAP
  usb: dwc2: Remove obsolete MODULE_ constants from platform.c
  usb: dwc3: imx8mp: fix error return code in dwc3_imx8mp_probe()
  usb: dwc3: imx8mp: detect dwc3 core node via compatible string
  usb: dwc3: gadget: Return success always for kick transfer in ep queue
  ...

Pull timer fixes from Thomas Gleixner:
 "Two fixes for timers:

   - Use the ALARM feature check in the alarmtimer core code insted of
     the old method of checking for the set_alarm() callback.

     Drivers can have that callback set but the feature bit cleared. If
     such a RTC device is selected then alarms wont work.

   - Use a proper define to let the preprocessor check whether Hyper-V
     VDSO clocksource should be active.

     The code used a constant in an enum with #ifdef, which evaluates to
     always false and disabled the clocksource for VDSO"

* tag 'timers-urgent-2021-05-16' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  clocksource/drivers/hyper-v: Re-enable VDSO_CLOCKMODE_HVCLOCK on X86
  alarmtimer: Check RTC features instead of ops

Pull xen fixes from Juergen Gross:

 - two patches for error path fixes

 - a small series for fixing a regression with swiotlb with Xen on Arm

* tag 'for-linus-5.13b-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen/swiotlb: check if the swiotlb has already been initialized
  arm64: do not set SWIOTLB_NO_FORCE when swiotlb is required
  xen/arm: move xen_swiotlb_detect to arm/swiotlb-xen.h
  xen/unpopulated-alloc: fix error return code in fill_list()
  xen/gntdev: fix gntdev_mmap() error exit path

Pull x86 fixes from Borislav Petkov:
 "The three SEV commits are not really urgent material. But we figured
  since getting them in now will avoid a huge amount of conflicts
  between future SEV changes touching tip, the kvm and probably other
  trees, sending them to you now would be best.

  The idea is that the tip, kvm etc branches for 5.14 will all base
  ontop of -rc2 and thus everything will be peachy. What is more, those
  changes are purely mechanical and defines movement so they should be
  fine to go now (famous last words).

  Summary:

   - Enable -Wundef for the compressed kernel build stage

   - Reorganize SEV code to streamline and simplify future development"

* tag 'x86_urgent_for_v5.13_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/boot/compressed: Enable -Wundef
  x86/msr: Rename MSR_K8_SYSCFG to MSR_AMD64_SYSCFG
  x86/sev: Move GHCB MSR protocol and NAE definitions in a common header
  x86/sev-es: Rename sev-es.{ch} to sev.{ch}

Pull powerpc fixes from Michael Ellerman:

 - Fix a regression in the conversion of the 64-bit BookE interrupt
   entry to C.

 - Fix KVM hosts running with the hash MMU since the recent KVM gfn
   changes.

 - Fix a deadlock in our paravirt spinlocks when hcall tracing is
   enabled.

 - Several fixes for oopses in our runtime code patching for security
   mitigations.

 - A couple of minor fixes for the recent conversion of 32-bit interrupt
   entry/exit to C.

 - Fix __get_user() causing spurious crashes in sigreturn due to a bad
   inline asm constraint, spotted with GCC 11.

 - A fix for the way we track IRQ masking state vs NMI interrupts when
   using the new scv system call entry path.

 - A couple more minor fixes.

Thanks to Cédric Le Goater, Christian Zigotzky, Christophe Leroy,
Naveen N. Rao, Nicholas Piggin Paul Menzel, and Sean Christopherson.

* tag 'powerpc-5.13-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/64e/interrupt: Fix nvgprs being clobbered
  powerpc/64s: Make NMI record implicitly soft-masked code as irqs disabled
  powerpc/64s: Fix stf mitigation patching w/strict RWX & hash
  powerpc/64s: Fix entry flush patching w/strict RWX & hash
  powerpc/64s: Fix crashes when toggling entry flush barrier
  powerpc/64s: Fix crashes when toggling stf barrier
  KVM: PPC: Book3S HV: Fix kvm_unmap_gfn_range_hv() for Hash MMU
  powerpc/legacy_serial: Fix UBSAN: array-index-out-of-bounds
  powerpc/signal: Fix possible build failure with unsafe_copy_fpr_{to/from}_user
  powerpc/uaccess: Fix __get_user() with CONFIG_CC_HAS_ASM_GOTO_OUTPUT
  powerpc/pseries: warn if recursing into the hcall tracing code
  powerpc/pseries: use notrace hcall variant for H_CEDE idle
  powerpc/pseries: Don't trace hcall tracing wrapper
  powerpc/pseries: Fix hcall tracing recursion in pv queued spinlocks
  powerpc/syscall: Calling kuap_save_and_lock() is wrong
  powerpc/interrupts: Fix kuep_unlock() call

Pull scheduler fixes from Ingo Molnar:
 "Fix an idle CPU selection bug, and an AMD Ryzen maximum frequency
  enumeration bug"

* tag 'sched-urgent-2021-05-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, sched: Fix the AMD CPPC maximum performance value on certain AMD Ryzen generations
  sched/fair: Fix clearing of has_idle_cores flag in select_idle_cpu()