- 18 Nov, 2022 40 commits
-
-
Lorenzo Bianconi authored
Get rid of cpu_relax in mtk_pending_work routine since MTK_RESETTING is set only in mtk_pending_work() and it runs holding rtnl lock Signed-off-by:
Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Lorenzo Bianconi authored
Restore user configured MTU running mtk_hw_init() during tx timeout routine since it will be overwritten after a hw reset. Reported-by:
Felix Fietkau <nbd@nbd.name> Fixes: 9ea4d311 ("net: ethernet: mediatek: add the whole ethernet reset into the reset process") Signed-off-by:
-
Alex Elder authored
Dan Carpenter reported that Smatch found an instance where a pointer which had previously been assumed could be null (as indicated by a null check) was later dereferenced without a similar check. In practice this doesn't lead to a problem because currently the pointers used are all non-null. Nevertheless this patch addresses the reported problem. In addition, I spotted another bug that arose in the same commit. When the command to initialize a routing table memory region was added, the number of entries computed for the non-hashed table was wrong (it ended up being a Boolean rather than the count intended). This bug is fixed here as well. Reported-by:
Dan Carpenter <error27@gmail.com> Link: https://lore.kernel.org/kernel-janitors/Y3OOP9dXK6oEydkf@kiliTested-by:
Caleb Connolly <caleb.connolly@linaro.com> Fixes: 5cb76899 ("net: ipa: reduce arguments to ipa_table_init_add()") Signed-off-by:
Alex Elder <elder@linaro.org> Signed-off-by:
-
David S. Miller authored
Merge tag 'wireless-next-2022-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Kalle Valo says: ==================== wireless-next patches for v6.2 Second set of patches for v6.2. Only driver patches this time, nothing really special. Unused platform data support was removed from wl1251 and rtw89 got WoWLAN support. Major changes: ath11k * support configuring channel dwell time during scan rtw89 * new dynamic header firmware format support * Wake-over-WLAN support rtl8xxxu * enable IEEE80211_HW_SUPPORT_FAST_XMIT ==================== Signed-off-by:
-
David S. Miller authored
Xin Long says: ==================== sctp: support vrf processing This patchset adds the VRF processing in SCTP. Simliar to TCP/UDP, it includes socket bind and socket/association lookup changes. For socket bind change, it allows sockets to bind to a VRF device and allows multiple sockets with the same IP and PORT to bind to different interfaces in patch 1-3. For socket/association lookup change, it adds dif and sdif check in both asoc and ep lookup in patch 4 and 5, and when binding to nodev, users can decide if accept the packets received from one l3mdev by setup a sysctl option in patch 6. Note with VRF support, in a netns, an association will be decided by src ip + src port + dst ip + dst port + bound_dev_if, and it's possible for ss to have: State Local Address:Port Peer Address:Port ESTAB 192.168.1.2%vrf-s1:1234 `- ESTAB 192.168.1.2%veth1:1234 192.168.1.1:1234 ESTAB 192.168.1.2%vrf-s2:1234 `- ESTAB 192.168.1.2%veth2:1234 192.168.1.1:1234 See the selftest in patch 7 for more usage. Also, thanks Carlo for testing this patch series on their use. v1->v2: - In Patch 5, move sctp_sk_bound_dev_eq() definition to net/sctp/ input.c to avoid a build error when IP_SCTP is disabled, as Paolo suggested. - In Patch 7, avoid one sleep by disabling the IPv6 dad, and remove another sleep by using ss to check if the server's ready, and also delete two unncessary sleeps in sctp_hello.c, as Paolo suggested. ==================== Signed-off-by: -
Xin Long authored
This patch adds 12 small test cases: 01-04 test for the sysctl net.sctp.l3mdev_accept. 05-10 test for only binding to a right l3mdev device, the connection can be created. 11-12 test for two socks binding to different l3mdev devices at the same time, each of them can process the packets from the corresponding peer. The tests run for both IPv4 and IPv6 SCTP. Signed-off-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
-
Xin Long authored
This patch is to add sysctl net.sctp.l3mdev_accept to allow users to change the pernet global l3mdev_accept. Signed-off-by:
-
Xin Long authored
This patch at first adds a pernet global l3mdev_accept to decide if it accepts the packets from a l3mdev when a SCTP socket doesn't bind to any interface. It's set to 1 to avoid any possible incompatible issue, and in next patch, a sysctl will be introduced to allow to change it. Then similar to inet/udp_sk_bound_dev_eq(), sctp_sk_bound_dev_eq() is added to check either dif or sdif is equal to sk_bound_dev_if, and to check sid is 0 or l3mdev_accept is 1 if sk_bound_dev_if is not set. This function is used to match a association or a endpoint, namely called by sctp_addrs_lookup_transport() and sctp_endpoint_is_match(). All functions that needs updating are: sctp_rcv(): asoc: __sctp_rcv_lookup() __sctp_lookup_association() -> sctp_addrs_lookup_transport() __sctp_rcv_lookup_harder() __sctp_rcv_init_lookup() __sctp_lookup_association() -> sctp_addrs_lookup_transport() __sctp_rcv_walk_lookup() __sctp_rcv_asconf_lookup() __sctp_lookup_association() -> sctp_addrs_lookup_transport() ep: __sctp_rcv_lookup_endpoint() -> sctp_endpoint_is_match() sctp_connect(): sctp_endpoint_is_peeled_off() __sctp_lookup_association() sctp_has_association() sctp_lookup_association() __sctp_lookup_association() -> sctp_addrs_lookup_transport() sctp_diag_dump_one(): sctp_transport_lookup_process() -> sctp_addrs_lookup_transport() Signed-off-by: -
Xin Long authored
Add skb_sdif function in struct sctp_af to get the enslaved device for both ipv4 and ipv6 when adding SCTP VRF support in sctp_rcv in the next patch. Signed-off-by:
-
Xin Long authored
In sctp_get_port_local(), when binding to IP and PORT, it should also check sk_bound_dev_if to match listening sk if it's set by SO_BINDTOIFINDEX, so that multiple sockets with the same IP and PORT, but different sk_bound_dev_if can be listened at the same time. Signed-off-by:
-
Xin Long authored
When binding to an ipv6 address, it calls ipv6_chk_addr() to check if this address is on any dev. If a socket binds to a l3mdev but no dev is passed to do this check, all l3mdev and slaves will be skipped and the check will fail. This patch is to pass the bound_dev to make sure the devices under the same l3mdev can be returned in ipv6_chk_addr(). When the bound_dev is not a l3mdev or l3slave, l3mdev_master_dev_rcu() will return NULL in __ipv6_chk_addr_and_flags(), it will keep compitable with before when NULL dev was passed. Signed-off-by:
-
Xin Long authored
After binding to a l3mdev, it should use the route table from the corresponding VRF to verify the addr when binding to an address. Note ipv6 doesn't need it, as binding to ipv6 address does not verify the addr with route lookup. Signed-off-by:
-
Jiawen Wu authored
Fix duplicate check on polling timeout. Fixes: 1efa9bfe ("net: libwx: Implement interaction with firmware") Signed-off-by:
Jiawen Wu <jiawenwu@trustnetic.com> Reviewed-by:
Leon Romanovsky <leonro@nvidia.com> Signed-off-by:
-
Antoine Tenart authored
Following 1b16b3fd ("net: phy: mscc: macsec: clear encryption keys when freeing a flow"), go one step further and instead of calling memzero_explicit on the key when freeing a flow, simply not copy the key in the first place as it's only used when a new flow is set up. Signed-off-by:
Antoine Tenart <atenart@kernel.org> Signed-off-by:
-
Jakub Kicinski authored
Alex Elder says: ==================== net: ipa: change GSI firmware load specification Currently, GSI firmware must be loaded for IPA before it can be used--either by the modem, or by the AP. New hardware supports a third option, with the bootloader taking responsibility for loading GSI firmware. In that case, neither the AP nor the modem needs to do that. The first patch in this series deprecates the "modem-init" Device Tree property in the IPA binding, using a new "qcom,gsi-loader" property instead. The second and third implement logic in the code to support either the "old" or the "new" way of specifying how GSI firmware is loaded. The last two patches implement a new value for the "qcom,gsi-loader" property. If the value is "skip", neither the AP nor modem needs to load the GSI firmware. The first of these patches implements the change in the IPA binding; the second implements it in the code. ==================== Link: https://lore.kernel.org/r/20221116073257.34010-1-elder@linaro.orgSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Alex Elder authored
Define a new value "skip" for the "qcom,gsi-loader" Device Tree property. If used, it indicates that neither the AP nor the modem need to load GSI firmware (because it has already been loaded--for example by the boot loader). Signed-off-by:
-
Alex Elder authored
Add a new enumerated value to those defined for the qcom,gsi-loader property. If the qcom,gsi-loader is "skip", the GSI firmware will already be loaded, so neither the AP nor modem is required to load GSI firmware. Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by:
-
Alex Elder authored
Introduce a new way of specifying how the GSI firmware gets loaded for IPA. Currently, this is indicated by the presence or absence of the Boolean "modem-init" Device Tree property. The new property must have a value--either "self" or "modem"--which indicates whether the AP or modem is the GSI firmware loader, respectively. For legacy systems, the new property will not exist, and the "modem-init" property will be used. For newer systems, the "qcom,gsi-loader" property *must* exist, and must have one of the two prescribed values. It is an error to have both properties defined, and it is an error for the new property to have an unrecognized value. Signed-off-by:
-
Alex Elder authored
The GSI layer used for IPA requires firmware to be loaded. Currently either the AP or the modem loads the firmware, distinguished by whether the "modem-init" Device Tree property is defined. Some newer systems implement a third option. In preparation for that, encapsulate the code that determines how the GSI firmware gets loaded in a new function, ipa_firmware_loader(). Signed-off-by:
-
Alex Elder authored
GSI firmware for IPA must be loaded during initialization, either by the AP or by the modem. The loader is currently specified based on whether the Boolean modem-init property is present. Instead, use a new property with an enumerated value to indicate explicitly how GSI firmware gets loaded. With this in place, a third approach can be added in an upcoming patch. The new qcom,gsi-loader property has two defined values: - self: The AP loads GSI firmware - modem: The modem loads GSI firmware The modem-init property must still be supported, but is now marked deprecated. Update the example so it represents the SC7180 SoC, and provide examples for the qcom,gsi-loader, memory-region, and firmware-name properties. Signed-off-by:
-
Xin Long authored
Move these two macros from net/sctp/sctp.h to linux/sctp.h, so that it will be enough to include only linux/sctp.h in nft_exthdr.c and xt_sctp.c. It should not include "net/sctp/sctp.h" if a module does not have a dependence on SCTP module. Signed-off-by:
Saeed Mahameed <saeed@kernel.org> Link: https://lore.kernel.org/r/ef6468a687f36da06f575c2131cd4612f6b7be88.1668526821.git.lucien.xin@gmail.comSigned-off-by:
-
Xin Long authored
Currently "net/sctp/checksum.h" including "net/sctp/sctp.h" is included in quite some places in netfilter and openswitch and net/sched. It's not necessary to include "net/sctp/sctp.h" if a module does not have dependence on SCTP, "linux/sctp.h" is the right one to include. Signed-off-by:
-
Jakub Kicinski authored
Michal Wilczynski says: ==================== Implement devlink-rate API and extend it This patch series implements devlink-rate for ice driver. Unfortunately current API isn't flexible enough for our use case, so there is a need to extend it. Some functions have been introduced to enable the driver to export current Tx scheduling configuration. Pasting justification for this series from commit implementing devlink-rate in ice driver(that is a part of this series): There is a need to support modification of Tx scheduler tree, in the ice driver. This will allow user to control Tx settings of each node in the internal hierarchy of nodes. As a result user will be able to use Hierarchy QoS implemented entirely in the hardware. This patch implemenents devlink-rate API. It also exports initial default hierarchy. It's mostly dictated by the fact that the tree can't be removed entirely, all we can do is enable the user to modify it. For example root node shouldn't ever be removed, also nodes that have children are off-limits. Example initial tree with 2 VF's: [root@fedora ~]# devlink port function rate show pci/0000:4b:00.0/node_27: type node parent node_26 pci/0000:4b:00.0/node_26: type node parent node_0 pci/0000:4b:00.0/node_34: type node parent node_33 pci/0000:4b:00.0/node_33: type node parent node_32 pci/0000:4b:00.0/node_32: type node parent node_16 pci/0000:4b:00.0/node_19: type node parent node_18 pci/0000:4b:00.0/node_18: type node parent node_17 pci/0000:4b:00.0/node_17: type node parent node_16 pci/0000:4b:00.0/node_21: type node parent node_20 pci/0000:4b:00.0/node_20: type node parent node_3 pci/0000:4b:00.0/node_14: type node parent node_5 pci/0000:4b:00.0/node_5: type node parent node_3 pci/0000:4b:00.0/node_13: type node parent node_4 pci/0000:4b:00.0/node_12: type node parent node_4 pci/0000:4b:00.0/node_11: type node parent node_4 pci/0000:4b:00.0/node_10: type node parent node_4 pci/0000:4b:00.0/node_9: type node parent node_4 pci/0000:4b:00.0/node_8: type node parent node_4 pci/0000:4b:00.0/node_7: type node parent node_4 pci/0000:4b:00.0/node_6: type node parent node_4 pci/0000:4b:00.0/node_4: type node parent node_3 pci/0000:4b:00.0/node_3: type node parent node_16 pci/0000:4b:00.0/node_16: type node parent node_15 pci/0000:4b:00.0/node_15: type node parent node_0 pci/0000:4b:00.0/node_2: type node parent node_1 pci/0000:4b:00.0/node_1: type node parent node_0 pci/0000:4b:00.0/node_0: type node pci/0000:4b:00.0/1: type leaf parent node_27 pci/0000:4b:00.0/2: type leaf parent node_27 Let me visualize part of the tree: +---------+ | node_0 | +---------+ | +----v----+ | node_26 | +----+----+ | +----v----+ | node_27 | +----+----+ | |-----------------| +----v----+ +----v----+ | VF 1 | | VF 2 | +----+----+ +----+----+ So at this point there is a couple things that can be done. For example we could only assign parameters to VF's. [root@fedora ~]# devlink port function rate set pci/0000:4b:00.0/1 \ tx_max 5Gbps This would cap the VF 1 BW to 5Gbps. But let's say you would like to create a completely new branch. This can be done like this: [root@fedora ~]# devlink port function rate add \ pci/0000:4b:00.0/node_custom parent node_0 [root@fedora ~]# devlink port function rate add \ pci/0000:4b:00.0/node_custom_1 parent node_custom [root@fedora ~]# devlink port function rate set \ pci/0000:4b:00.0/1 parent node_custom_1 This creates a completely new branch and reassigns VF 1 to it. A number of parameters is supported per each node: tx_max, tx_share, tx_priority and tx_weight. ==================== Link: https://lore.kernel.org/r/20221115104825.172668-1-michal.wilczynski@intel.comSigned-off-by: -
Michal Wilczynski authored
Provide documentation for newly introduced netlink attributes for devlink-rate: tx_priority and tx_weight. Mention the possibility to export tree from the driver. Signed-off-by:
Michal Wilczynski <michal.wilczynski@intel.com> Signed-off-by:
-
Michal Wilczynski authored
Add documentation to a newly added devlink-rate feature. Provide some examples on how to use the commands, which netlink attributes are supported and descriptions of the attributes. Signed-off-by:
-
Michal Wilczynski authored
ADQ, DCB might interfere with Custom Tx Scheduler changes that user might introduce using devlink-rate API. Check if ADQ, DCB is active, when user tries to change any setting in exported Tx scheduler tree. If any of those are active block the user from doing so, and log an appropriate message. Remove the exported hierarchy if user enable ADQ or DCB. Prevent ADQ or DCB from getting configured if user already made some changes using devlink-rate API. Signed-off-by:
-
Michal Wilczynski authored
There is a need to support modification of Tx scheduler tree, in the ice driver. This will allow user to control Tx settings of each node in the internal hierarchy of nodes. As a result user will be able to use Hierarchy QoS implemented entirely in the hardware. This patch implemenents devlink-rate API. It also exports initial default hierarchy. It's mostly dictated by the fact that the tree can't be removed entirely, all we can do is enable the user to modify it. For example root node shouldn't ever be removed, also nodes that have children are off-limits. Example initial tree with 2 VF's: [root@fedora ~]# devlink port function rate show pci/0000:4b:00.0/node_27: type node parent node_26 pci/0000:4b:00.0/node_26: type node parent node_0 pci/0000:4b:00.0/node_34: type node parent node_33 pci/0000:4b:00.0/node_33: type node parent node_32 pci/0000:4b:00.0/node_32: type node parent node_16 pci/0000:4b:00.0/node_19: type node parent node_18 pci/0000:4b:00.0/node_18: type node parent node_17 pci/0000:4b:00.0/node_17: type node parent node_16 pci/0000:4b:00.0/node_21: type node parent node_20 pci/0000:4b:00.0/node_20: type node parent node_3 pci/0000:4b:00.0/node_14: type node parent node_5 pci/0000:4b:00.0/node_5: type node parent node_3 pci/0000:4b:00.0/node_13: type node parent node_4 pci/0000:4b:00.0/node_12: type node parent node_4 pci/0000:4b:00.0/node_11: type node parent node_4 pci/0000:4b:00.0/node_10: type node parent node_4 pci/0000:4b:00.0/node_9: type node parent node_4 pci/0000:4b:00.0/node_8: type node parent node_4 pci/0000:4b:00.0/node_7: type node parent node_4 pci/0000:4b:00.0/node_6: type node parent node_4 pci/0000:4b:00.0/node_4: type node parent node_3 pci/0000:4b:00.0/node_3: type node parent node_16 pci/0000:4b:00.0/node_16: type node parent node_15 pci/0000:4b:00.0/node_15: type node parent node_0 pci/0000:4b:00.0/node_2: type node parent node_1 pci/0000:4b:00.0/node_1: type node parent node_0 pci/0000:4b:00.0/node_0: type node pci/0000:4b:00.0/1: type leaf parent node_27 pci/0000:4b:00.0/2: type leaf parent node_27 Let me visualize part of the tree: +---------+ | node_0 | +---------+ | +----v----+ | node_26 | +----+----+ | +----v----+ | node_27 | +----+----+ | |-----------------| +----v----+ +----v----+ | VF 1 | | VF 2 | +----+----+ +----+----+ So at this point there is a couple things that can be done. For example we could only assign parameters to VF's. [root@fedora ~]# devlink port function rate set pci/0000:4b:00.0/1 \ tx_max 5Gbps This would cap the VF 1 BW to 5Gbps. But let's say you would like to create a completely new branch. This can be done like this: [root@fedora ~]# devlink port function rate add \ pci/0000:4b:00.0/node_custom parent node_0 [root@fedora ~]# devlink port function rate add \ pci/0000:4b:00.0/node_custom_1 parent node_custom [root@fedora ~]# devlink port function rate set \ pci/0000:4b:00.0/1 parent node_custom_1 This creates a completely new branch and reassigns VF 1 to it. A number of parameters is supported per each node: tx_max, tx_share, tx_priority and tx_weight. Signed-off-by: -
Michal Wilczynski authored
devlink-rate API requires a priv object to be allocated when node still doesn't have a parent. This is problematic, because ice_sched_node can't be currently created without a parent. Add an option to pre-allocate memory for ice_sched_node struct. Add new arguments to ice_sched_add() and ice_sched_add_elems() that allow for pre-allocation of memory for ice_sched_node struct. Signed-off-by:
-
Michal Wilczynski authored
To support new devlink-rate API ice_sched_node struct needs to store a number of additional parameters. This includes tx_max, tx_share, tx_weight, and tx_priority. Add new fields to ice_sched_node struct. Add new functions to configure the hardware with new parameters. Introduce new xarray to identify nodes uniquely. Signed-off-by:
-
Michal Wilczynski authored
Currently the driver is able to create leaf nodes for the devlink-rate, but is unable to set parent for them. This wasn't as issue before the possibility to export hierarchy from the driver. After adding the export feature, in order for the driver to supply correct hierarchy, it's necessary for it to be able to supply a parent name to devl_rate_leaf_create(). Introduce a new parameter 'parent_name' in devl_rate_leaf_create(). Signed-off-by:
Jiri Pirko <jiri@nvidia.com> Signed-off-by:
-
Michal Wilczynski authored
Currently it's not possible to reassign the parent of the node using one command. As the previous commit introduced a way to export entire hierarchy from the driver, being able to modify and reassign parents become important. This way user might easily change QoS settings without interrupting traffic. Example command: devlink port function rate set pci/0000:4b:00.0/1 parent node_custom_1 This reassigns leaf node parent to node_custom_1. Signed-off-by:
Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by:
-
Michal Wilczynski authored
Intel 100G card internal firmware hierarchy for Hierarchicial QoS is very rigid and can't be easily removed. This requires an ability to export default hierarchy to allow user to modify it. Currently the driver is only able to create the 'leaf' nodes, which usually represent the vport. This is not enough for HQoS implemented in Intel hardware. Introduce new function devl_rate_node_create() that allows for creation of the devlink-rate nodes from the driver. Signed-off-by:
-
Michal Wilczynski authored
To fully utilize offload capabilities of Intel 100G card QoS capabilities new attribute 'tx_weight' needs to be introduced. This attribute allows for usage of Weighted Fair Queuing arbitration scheme among siblings. This arbitration scheme can be used simultaneously with the strict priority. Introduce new attribute in devlink-rate that will allow for configuration of Weighted Fair Queueing. New attribute is optional. Signed-off-by:
-
Michal Wilczynski authored
To fully utilize offload capabilities of Intel 100G card QoS capabilities new attribute 'tx_priority' needs to be introduced. This attribute allows for usage of strict priority arbiter among siblings. This arbitration scheme attempts to schedule nodes based on their priority as long as the nodes remain within their bandwidth limit. Introduce new attribute in devlink-rate that will allow for configuration of strict priority. New attribute is optional. Signed-off-by:
-
Jakub Kicinski authored
Vladimir Oltean says: ==================== Autoload DSA tagging driver when dynamically changing protocol This patch set solves the issue reported by Michael and Heiko here: https://lore.kernel.org/lkml/20221027113248.420216-1-michael@walle.cc/ making full use of Michael's suggestion of having two modaliases: one gets used for loading the tagging protocol when it's the default one reported by the switch driver, the other gets loaded at user's request, by name. # modinfo tag_ocelot filename: /lib/modules/6.1.0-rc4+/kernel/net/dsa/tag_ocelot.ko license: GPL v2 alias: dsa_tag:seville alias: dsa_tag:id-21 alias: dsa_tag:ocelot alias: dsa_tag:id-15 depends: dsa_core intree: Y name: tag_ocelot vermagic: 6.1.0-rc4+ SMP preempt mod_unload modversions aarch64 Tested on NXP LS1028A-RDB with the following device tree addition: &mscc_felix_port4 { dsa-tag-protocol = "ocelot-8021q"; }; &mscc_felix_port5 { dsa-tag-protocol = "ocelot-8021q"; }; CONFIG_NET_DSA and everything that depends on it is built as module. Everything auto-loads, and "cat /sys/class/net/eno2/dsa/tagging" shows "ocelot-8021q". Traffic works as well. Furthermore, "echo ocelot-8021q" into the aforementioned sysfs file now auto-loads the driver for it. ==================== Link: https://lore.kernel.org/r/20221115011847.2843127-1-vladimir.oltean@nxp.comSigned-off-by:
-
Vladimir Oltean authored
Issue a request_module() call when an attempt to change the tagging protocol is made, either by sysfs or by device tree. In the case of ocelot (the only driver for which the default and the alternative tagging protocol are compiled as different modules), the user is now no longer required to insert tag_ocelot_8021q.ko manually. In the particular case of ocelot, this solves a problem where tag_ocelot_8021q.ko is built as module, and this is present in the device tree: &mscc_felix_port4 { dsa-tag-protocol = "ocelot-8021q"; }; &mscc_felix_port5 { dsa-tag-protocol = "ocelot-8021q"; }; Because no one attempts to load the module into the kernel at boot time, the switch driver will fail to probe (actually forever defer) until someone manually inserts tag_ocelot_8021q.ko. This is now no longer necessary and happens automatically. Rename dsa_find_tagger_by_name() to denote the change in functionality: there is now feature parity with dsa_tag_driver_get_by_id(), i.o.w. we also load the module if it's missing. Link: https://lore.kernel.org/lkml/20221027113248.420216-1-michael@walle.cc/Suggested-by:Michael Walle <michael@walle.cc> Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Tested-by: Michael Walle <michael@walle.cc> # on kontron-sl28 w/ ocelot_8021q Tested-by:
-
Vladimir Oltean authored
A future patch will introduce one more way of getting a reference on a tagging protocl driver (by name). Rename the current method to "by_id". Signed-off-by:
-
Vladimir Oltean authored
Currently, dsa_find_tagger_by_name() uses sysfs_streq() which works both with strings that contain \n at the end (echo ocelot > .../dsa/tagging) and with strings that don't (printf ocelot > .../dsa/tagging). There will be a problem once we'll want to construct the modalias string based on which we auto-load the protocol kernel module. If the sysfs buffer ends in a newline, we need to strip it first. This is a preparatory patch specifically for that. Signed-off-by:
-
Vladimir Oltean authored
Currently, tagging protocol drivers have a modalias of "dsa_tag:id-<number>", where the number is one of DSA_TAG_PROTO_*_VALUE. This modalias makes it possible for the request_module() call in dsa_tag_driver_get() to work, given the input it has - an integer returned by ds->ops->get_tag_protocol(). It is also possible to change tagging protocols at (pseudo-)runtime, via sysfs or via device tree, and this works via the name string of the tagging protocol rather than via its id (DSA_TAG_PROTO_*_VALUE). In the latter case, there is no request_module() call, because there is no association that the DSA core has between the string name and the ID, to construct the modalias. The module is simply assumed to have been inserted. This is actually slightly problematic when the tagging protocol change should take place at probe time, since it's expected that the dependency module should get autoloaded. For this purpose, let's introduce a second modalias, so that the DSA core can call request_module() by name. There is no reason to make the modalias by name optional, so just modify the MODULE_ALIAS_DSA_TAG_DRIVER() macro to take both the ID and the name as arguments, and generate two modaliases behind the scenes. Suggested-by:
-
Vladimir Oltean authored
It's autumn cleanup time, and today's target are modaliases. Michael says that for users of modinfo, "dsa_tag-20" is not the most suggestive name, and recommends a change to "dsa_tag-id-20". Andrew points out that other modaliases have a prefix delimited by colons, so he recommends "dsa_tag:20" instead of "dsa_tag-20". To satisfy both proposals, Florian recommends "dsa_tag:id-20". The modaliases are not stable ABI, and the essential information (protocol ID) is still conveyed in the new string, which request_module() must be adapted to form. Link: 20221027210830.3577793-1-vladimir.oltean@nxp.com Suggested-by:
Andrew Lunn <andrew@lunn.ch> Suggested-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
