- 26 Nov, 2016 38 commits
-
-
Lokesh Vutla authored
commit 3984903a upstream. RTC can be clocked from an external 32KHz oscillator, or from the Peripheral PLL. The RTC has an internal oscillator buffer to support direct operation with a crystal. ---------------------------------------- | Device --------- | | | | | | | RTCSS | | | --------- | | | OSC |<------| RTC | | | | |------>| OSC |--- | | | | -------- | | | | | ----|clk | | | -------- | | | | | | PRCM |--- | | | | -------- -------- | ---------------------------------------- The RTC functional clock is sourced by default from the clock derived from the Peripheral PLL. In order to select source as external osc clk the following changes needs to be done: - Enable the RTC OSC (RTC_OSC_REG[4]OSC32K_GZ = 0) - Enable the clock mux(RTC_OSC_REG[6]K32CLK_EN = 1) - Select the external clock source (RTC_OSC_REG[3]32KCLK_SEL = 1) Fixes: 399cf0f6 ("rtc: omap: Add external clock enabling support") Signed-off-by:
Keerthy <j-keerthy@ti.com> Signed-off-by:
Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by:
Dave Gerlach <d-gerlach@ti.com> Signed-off-by:
Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Emil Lundmark authored
commit 5c2f117a upstream. Since 'parent_rate * mfn' may overflow 32 bits, the result should be stored using 64 bits. The problem was discovered when trying to set the rate of the audio PLL (pll4_post_div) on an i.MX6Q. The desired rate was 196.608 MHz, but the actual rate returned was 192.000570 MHz. The round rate function should have been able to return 196.608 MHz, i.e., the desired rate. Fixes: ba7f4f55 ("clk: imx: correct AV PLL rate formula") Cc: Anson Huang <b20788@freescale.com> Signed-off-by:
Emil Lundmark <emil@limesaudio.com> Reviewed-by:
Fabio Estevam <fabio.estevam@nxp.com> Acked-by:
Shawn Guo <shawnguo@kernel.org> Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org> Signed-off-by:
-
Wei Yongjun authored
commit a29e52a6 upstream. Fix the retrn value check which testing the wrong variable in mmp2_clk_init(). Fixes: 1ec770d9 ("clk: mmp: add mmp2 DT support for clock driver") Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by:
-
Wei Yongjun authored
commit deab0726 upstream. Fix the retrn value check which testing the wrong variable in pxa168_clk_init(). Fixes: ab08aefc ("clk: mmp: add pxa168 DT support for clock driver") Signed-off-by:
-
Wei Yongjun authored
commit 10f2bfb0 upstream. Fix the retrn value check which testing the wrong variable in pxa910_clk_init(). Fixes: 2bc61da9 ("clk: mmp: add pxa910 DT support for clock driver") Signed-off-by:
-
Michael S. Tsirkin authored
commit f3358507 upstream. Virtio 1.0 spec says VIRTIO_F_ANY_LAYOUT and VIRTIO_NET_F_GSO are legacy-only feature bits. Do not negotiate them in virtio 1 mode. Note this is a spec violation so we need to backport it to stable/downstream kernels. Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Reviewed-by:
Cornelia Huck <cornelia.huck@de.ibm.com> Acked-by:
Jason Wang <jasowang@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Ville Syrjälä authored
commit bc9db5ad upstream. My heuristic for detecting type 1 DVI DP++ adaptors based on the VBT port information apparently didn't survive the reality of buggy VBTs. In this particular case we have a machine with a natice HDMI port, but the VBT tells us it's a DP++ port based on its capabilities. The dvo_port information in VBT does claim that we're dealing with a HDMI port though, but we have other machines which do the same even when they actually have DP++ ports. So that piece of information alone isn't sufficient to tell the two apart. After staring at a bunch of VBTs from various machines, I have to conclude that the only other semi-reliable clue we can use is the presence of the AUX channel in the VBT. On this particular machine AUX channel is specified as zero, whereas on some of the other machines which listed the DP++ port as HDMI have a non-zero AUX channel. I've also seen VBTs which have dvo_port a DP but have a zero AUX channel. I believe those we need to treat as DP ports, so we'll limit the AUX channel check to just the cases where dvo_port is HDMI. If we encounter any more serious failures with this heuristic I think we'll have to have to throw it out entirely. But that could mean that there is a risk of type 1 DVI dongle users getting greeted by a black screen, so I'd rather not go there unless absolutely necessary. v2: Remove the duplicate PORT_A check (Daniel) Fix some typos in the commit message Cc: Daniel Otero <daniel.otero@outlook.com> Tested-by:
Daniel Otero <daniel.otero@outlook.com> Fixes: d6199256 ("drm/i915: Determine DP++ type 1 DVI adaptor presence based on VBT") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97994Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1478884464-14251-1-git-send-email-ville.syrjala@linux.intel.comReviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> (cherry picked from commit 7a17995a) Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Ville Syrjälä authored
commit fc22b787 upstream. Once we've determined that the sink is MST capable we never end up running through the full detect cycle again, despite getting HPDs. Fix tht by ripping out the incorrect piece of code responsible. This got broken when I moved the long HPD handling to the ->detect() hook, but failed to remove the leftover code. Cc: Ander Conselvan de Oliveira <conselvan2@gmail.com> Cc: drm-intel-fixes@lists.freedesktop.org Cc: Rui Tiago Matos <tiagomatos@gmail.com> Tested-by:
Rui Tiago Matos <tiagomatos@gmail.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98323 Cc: Kirill A. Shutemov <kirill@shutemov.name> Tested-by:
Kirill A. Shutemov <kirill@shutemov.name> References: https://bugs.freedesktop.org/show_bug.cgi?id=98306 Fixes: 10158116 ("drm/i915: Move long hpd handling into the hotplug work") Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> (cherry picked from commit 1aab956c) Signed-off-by:
-
Mario Kleiner authored
commit 8e94a46c upstream. External clients which import our bo's wait only for exclusive dmabuf-fences, not on shared ones, ditto for bo's which we import from external providers and write to. Therefore attach exclusive fences on prime shared buffers if our exported buffer gets imported by an external client, or if we import a buffer from an external exporter. See discussion in thread: https://lists.freedesktop.org/archives/dri-devel/2016-October/122370.html Prime export tested on Intel iGPU + AMD Tonga dGPU as DRI3/Present Prime render offload, and with the Tonga standalone as primary gpu. v2: Add a wait for all shared fences before prime export, as suggested by Christian Koenig. v3: - Mark buffer prime_exported in amdgpu_gem_prime_pin, so we only use the exclusive fence when exporting a bo to external clients like a separate iGPU, but not when exporting/importing from/to ourselves as part of regular DRI3 fd passing. - Propagate failure of reservation_object_wait_rcu back to caller. v4: - Switch to a prime_shared_count counter instead of a flag, which gets in/decremented on prime_pin/unpin, so we can switch back to shared fences if all clients detach from our exported bo. - Also switch to exclusive fence for prime imported bo's. v5: - Drop lret, instead use int ret -> long ret, as proposed by Christian. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=95472 Tested-by: Mike Lothian <mike@fireburn.co.uk> (v1) Signed-off-by:
Mario Kleiner <mario.kleiner.de@gmail.com> Reviewed-by: Christian König <christian.koenig@amd.com>. Cc: Christian König <christian.koenig@amd.com> Cc: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Benjamin Herrenschmidt authored
commit c0a36013 upstream. Commit d3cbff1b "powerpc: Put exception configuration in a common place" broke the setting of the AIL bit (which enables taking exceptions with the MMU still on) on all processors, moving it incorrectly to a function called only on the boot CPU. This was correct for the guest case but not when running in hypervisor mode. This fixes it by partially reverting that commit, putting the setting back in cpu_ready_for_interrupts() Fixes: d3cbff1b ("powerpc: Put exception configuration in a common place") Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Sven Ebenfeld authored
commit 83d2c9a9 upstream. When using AES-XTS on a Wandboard, we receive a Mode error: caam_jr 2102000.jr1: 20001311: CCB: desc idx 19: AES: Mode error. According to the Security Reference Manual, the Low Power AES units of the i.MX6 do not support the XTS mode. Therefore we must not register XTS implementations in the Crypto API. Signed-off-by:
Sven Ebenfeld <sven.ebenfeld@gmail.com> Reviewed-by:
Horia Geantă <horia.geanta@nxp.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au>
-
Fabio Estevam authored
commit e3c9d9d6 upstream. Since commit fa93fd4e ("regulator: core: Ensure we are at least in bounds for our constraints") the imx53-qsb board populated with a Dialog DA9053 PMIC fails to boot: LDO3: Bringing 3300000uV into 1800000-1800000uV The LDO3 voltage constraints passed in the device tree do not match the valid range according to the datasheet, so fix this accordingly to allow the board booting again. While at it, fix the other voltage constraints as well. Signed-off-by:
-
Theodore Ts'o authored
commit 8cdf3372 upstream. If the block size or cluster size is insane, reject the mount. This is important for security reasons (although we shouldn't be just depending on this check). Ref: http://www.securityfocus.com/archive/1/539661 Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1332506Reported-by:
Borislav Petkov <bp@alien8.de> Reported-by:
Nikolay Borisov <kernel@kyup.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
-
Borislav Petkov authored
commit c6a38553 upstream. So Sebastian turned off the PIE for kernel builds but that was too late - Kbuild.include already uses KBUILD_CFLAGS and trying to disable gcc options with, say cc-disable-warning, fails: gcc -D__KERNEL__ -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs ... -Wno-sign-compare -fno-asynchronous-unwind-tables -Wframe-address -c -x c /dev/null -o .31392.tmp /dev/null:1:0: error: code model kernel does not support PIC mode because that returns an error and we can't disable the warning. For example in this case: KBUILD_CFLAGS += $(call cc-disable-warning,frame-address,) which leads to gcc issuing all those warnings again. So let's turn off PIE/PIC at the earliest possible moment, when we declare KBUILD_CFLAGS so that cc-disable-warning picks it up too. Also, we need the $(call cc-option ...) because -fno-PIE is supported since gcc v3.4 and our lowest supported gcc version is 3.2 right now. Signed-off-by:
Borislav Petkov <bp@suse.de> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by:
Michal Marek <mmarek@suse.com> Signed-off-by:
-
Sebastian Andrzej Siewior authored
commit 90944e40 upstream. If the gcc is configured to do -fPIE by default then the build aborts later with: | Unsupported relocation type: unknown type rel type name (29) Tagging it stable so it is possible to compile recent stable kernels as well. Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by:
-
Sebastian Andrzej Siewior authored
commit 82031ea2 upstream. Adding -no-PIE to the fstack protector check. -no-PIE was introduced before -fstack-protector so there is no need for a runtime check. Without it the build stops: |Cannot use CONFIG_CC_STACKPROTECTOR_STRONG: -fstack-protector-strong available but compiler is broken due to -mcmodel=kernel + -fPIE if -fPIE is enabled by default. Tagging it stable so it is possible to compile recent stable kernels as well. Signed-off-by:
-
Sebastian Andrzej Siewior authored
commit 8ae94224 upstream. Debian started to build the gcc with -fPIE by default so the kernel build ends before it starts properly with: |kernel/bounds.c:1:0: error: code model kernel does not support PIC mode Also add to KBUILD_AFLAGS due to: |gcc -Wp,-MD,arch/x86/entry/vdso/vdso32/.note.o.d … -mfentry -DCC_USING_FENTRY … vdso/vdso32/note.S |arch/x86/entry/vdso/vdso32/note.S:1:0: sorry, unimplemented: -mfentry isn’t supported for 32-bit in combination with -fpic Tagging it stable so it is possible to compile recent stable kernels as well. Signed-off-by:
-
Linus Torvalds authored
commit ef6000b4 upstream. This affectively reverts commit 377ccbb4 ("Makefile: Mute warning for __builtin_return_address(>0) for tracing only") because it turns out that it really isn't tracing only - it's all over the tree. We already also had the warning disabled separately for mm/usercopy.c (which this commit also removes), and it turns out that we will also want to disable it for get_lock_parent_ip(), that is used for at least TRACE_IRQFLAGS. Which (when enabled) ends up being all over the tree. Steven Rostedt had a patch that tried to limit it to just the config options that actually triggered this, but quite frankly, the extra complexity and abstraction just isn't worth it. We have never actually had a case where the warning is actually useful, so let's just disable it globally and not worry about it. Acked-by:
Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Peter Anvin <hpa@zytor.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Alex Hemme authored
commit ad092de6 upstream. Deselect functionality can be ignored for device-trees with "i2c-mux-idle-disconnect" entries if no platform_data is available. By enabling the deselect functionality outside the platform_data block the logic works as it did in previous kernels. Fixes: 7fcac980 ("i2c: i2c-mux-pca954x: convert to use an explicit i2c mux core") Signed-off-by:
Alex Hemme <ahemme@cisco.com> Signed-off-by:
Ziyang Wu <ziywu@cisco.com> [touched up a few minor issues /peda] Signed-off-by:
Peter Rosin <peda@axentia.se> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
-
Linus Walleij authored
commit 93d710a6 upstream. We get the following build error from UM Linux after adding an entry to drivers/iio/gyro/Kconfig that issues "select I2C_MUX": ERROR: "devm_ioremap_resource" [drivers/i2c/muxes/i2c-mux-reg.ko] undefined! ERROR: "of_address_to_resource" [drivers/i2c/muxes/i2c-mux-reg.ko] undefined! It appears that the I2C mux core code depends on HAS_IOMEM for historical reasons, while CONFIG_I2C_MUX_REG does *not* have a direct dependency on HAS_IOMEM. This creates a situation where a allyesconfig or allmodconfig for UM Linux will select I2C_MUX, and will implicitly enable I2C_MUX_REG as well, and the compilation will fail for the register driver. Fix this up by making I2C_MUX_REG depend on HAS_IOMEM and removing the dependency from I2C_MUX. Reported-by:
kbuild test robot <fengguang.wu@intel.com> Reported-by:
Jonathan Cameron <jic23@jic23.retrosnub.co.uk> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Acked-by:
Jonathan Cameron <jic23@kernel.org> Acked-by:
-
Takashi Iwai authored
commit 9a254191 upstream. The commit [1a3f0991: ALSA: hda - Fix surround output pins for ASRock B150M mobo] introduced a fixup of pin configs for ASRock mobos to fix the surround outputs. However, this overrides the pin configs of the mic pins as if they are outputs-only, effectively disabling the mic inputs. Of course, it's a regression wrt mic functionality. Actually the pins 0x18 and 0x1a don't need to be changed; we just need to disable the bogus pins 0x14 and 0x15. Then the auto-parser will pick up mic pins as switchable and assign the surround outputs there. This patch removes the incorrect pin overrides of NID 0x18 and 0x1a from the ASRock fixup. Fixes: 1a3f0991 ('ALSA: hda - Fix surround output pins for ASRock...') Reported-and-tested-by:
Vitor Antunes <vitor.hda@gmail.com> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=187431Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Hui Wang authored
commit 2ecb704a upstream. Latest Thinkpad laptops use the HKEY_HID LEN0268 instead of the LEN0068, as a result neither audio mute led nor mic mute led can work any more. After adding the new HKEY_HID into the is_thinkpad(), both of them works well as before. Signed-off-by:
Hui Wang <hui.wang@canonical.com> Signed-off-by:
-
Takashi Iwai authored
commit 6ff1a253 upstream. The usb-audio driver implements the deferred device disconnection for the device in use. In this mode, the disconnection callback returns immediately while the actual ALSA card object removal happens later when all files get closed. As Shuah reported, this code flow, however, leads to a use-after-free, detected by KASAN: BUG: KASAN: use-after-free in snd_usb_audio_free+0x134/0x160 [snd_usb_audio] at addr ffff8801c863ce10 Write of size 8 by task pulseaudio/2244 Call Trace: [<ffffffff81b31473>] dump_stack+0x67/0x94 [<ffffffff81564ef1>] kasan_object_err+0x21/0x70 [<ffffffff8156518a>] kasan_report_error+0x1fa/0x4e0 [<ffffffff81564ad7>] ? kasan_slab_free+0x87/0xb0 [<ffffffff81565733>] __asan_report_store8_noabort+0x43/0x50 [<ffffffffa0fc0f54>] ? snd_usb_audio_free+0x134/0x160 [snd_usb_audio] [<ffffffffa0fc0f54>] snd_usb_audio_free+0x134/0x160 [snd_usb_audio] [<ffffffffa0fc0fb1>] snd_usb_audio_dev_free+0x31/0x40 [snd_usb_audio] [<ffffffff8243c78a>] __snd_device_free+0x12a/0x210 [<ffffffff8243d1f5>] snd_device_free_all+0x85/0xd0 [<ffffffff8242cae4>] release_card_device+0x34/0x130 [<ffffffff81ef1846>] device_release+0x76/0x1e0 [<ffffffff81b37ad7>] kobject_release+0x107/0x370 ..... Object at ffff8801c863cc80, in cache kmalloc-2048 size: 2048 Allocated: [<ffffffff810804eb>] save_stack_trace+0x2b/0x50 [<ffffffff81564296>] save_stack+0x46/0xd0 [<ffffffff8156450d>] kasan_kmalloc+0xad/0xe0 [<ffffffff81560d1a>] kmem_cache_alloc_trace+0xfa/0x240 [<ffffffff8214ea47>] usb_alloc_dev+0x57/0xc90 [<ffffffff8216349d>] hub_event+0xf1d/0x35f0 .... Freed: [<ffffffff810804eb>] save_stack_trace+0x2b/0x50 [<ffffffff81564296>] save_stack+0x46/0xd0 [<ffffffff81564ac1>] kasan_slab_free+0x71/0xb0 [<ffffffff81560929>] kfree+0xd9/0x280 [<ffffffff8214de6e>] usb_release_dev+0xde/0x110 [<ffffffff81ef1846>] device_release+0x76/0x1e0 .... It's the code trying to clear drvdata of the assigned usb_device where the usb_device itself was already released in usb_release_dev() after the disconnect callback. This patch fixes it by checking whether the code path is via the disconnect callback, i.e. chip->shutdown flag is set. Fixes: 79289e24 ('ALSA: usb-audio: Refer to chip->usb_id for quirks...') Reported-and-tested-by:
Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by:
-
Linus Walleij authored
commit 60f8339e upstream. When locking a GPIO line as IRQ, we go to lengths to double-check that the line is really set as input before marking it as used for IRQ. This is not good on GPIO chips that can sleep, because this function is called in IRQ-safe context. Just skip this if it can't be checked quickly. Currently this happens on sleeping expanders such as STMPE or TC3589x: BUG: scheduling while atomic: swapper/1/0x00000002 Modules linked in: CPU: 0 PID: 1 Comm: swapper Not tainted 4.9.0-rc1+ #38 Hardware name: Nomadik STn8815 [<c000f2e0>] (unwind_backtrace) from [<c000d244>] (show_stack+0x10/0x14) [<c000d244>] (show_stack) from [<c0037b78>] (__schedule_bug+0x54/0x80) [<c0037b78>] (__schedule_bug) from [<c042df14>] (__schedule+0x3a0/0x460) [<c042df14>] (__schedule) from [<c042e028>] (schedule+0x54/0xb8) (...) This patch fixes that problem and relies on the direction read from the chip when it was added. Fixes: 9c10280d ("gpio: flush direction status in gpiochip_lock_as_irq()") Cc: Patrice Chotard <patrice.chotard@st.com> Signed-off-by:
-
Oliver Hartkopp authored
commit deb507f9 upstream. Andrey Konovalov reported an issue with proc_register in bcm.c. As suggested by Cong Wang this patch adds a lock_sock() protection and a check for unsuccessful proc_create_data() in bcm_connect(). Reference: http://marc.info/?l=linux-netdev&m=147732648731237Reported-by:
Andrey Konovalov <andreyknvl@google.com> Suggested-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
Oliver Hartkopp <socketcan@hartkopp.net> Acked-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
-
Linus Walleij authored
commit f4058420 upstream. Since commit c4dd1ba3 ("mfd: stmpe: Add reset support for all STMPE variant") we're resetting the STMPE expanders before use. This caused a regression on the STMP2401 on the Nomadik NHK8815: stmpe-i2c 0-0043: stmpe2401 detected, chip id: 0x101 nmk-i2c 101f8000.i2c0: write to slave 0x43 timed out nmk-i2c 101f8000.i2c0: no ack received after address transmission stmpe-i2c 0-0044: stmpe2401 detected, chip id: 0x101 nmk-i2c 101f8000.i2c0: write to slave 0x44 timed out nmk-i2c 101f8000.i2c0: no ack received after address transmission It turns out that we start to poll for the reset bit to go low again too quickly: the STMPE2401 is not yet online and ready to be asked for the status of the RESET bit. By introducing a 10ms delay before starting to hammer the register for information, we get back to normal: stmpe-i2c 0-0043: stmpe2401 detected, chip id: 0x101 stmpe-i2c 0-0044: stmpe2401 detected, chip id: 0x101 Cc: Amelie Delaunay <amelie.delaunay@st.com> Fixes: c4dd1ba3 ("mfd: stmpe: Add reset support for all STMPE variant") Signed-off-by:
Patrice Chotard <patrice.chotard@st.com> Signed-off-by:
Lee Jones <lee.jones@linaro.org> Signed-off-by:
-
Azhar Shaikh authored
commit 274e43ed upstream. Commit 41a3da2b ("mfd: intel-lpss: Save register context on suspend") saved the register context while going to suspend and also put the device in reset state. Due to the resetting of device, system cannot enter S3/S0ix states when no_console_suspend flag is enabled. The system and serial console both hang. The resetting of device is not needed while going to suspend. Hence remove this code. Fixes: 41a3da2b ("mfd: intel-lpss: Save register context on suspend") Signed-off-by:
Azhar Shaikh <azhar.shaikh@intel.com> Acked-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
Ira Weiny authored
commit 458ed666 upstream. The new s_rnr_timeout was not properly being set and the code was incorrectly setting a different timer. Found by code inspection. Fixes: 08279d5c ("staging/rdma/hfi1: use new RNR timer") Reviewed-by:
Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by:
Ira Weiny <ira.weiny@intel.com> Signed-off-by:
Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
-
Dennis Dalessandro authored
commit e1fafdcb upstream. The initial code for rdmavt carried with it a restriction that was a vestige from the qib driver, that to dma map a page it had to be less than a page size. This is not the case on modern hardware, both qib and hfi1 will be just fine with unaligned map requests. This fixes a 4.8 regression where by an IPoIB transfer of > PAGE_SIZE will hang because the dma map page call always fails. This was introduced after commit 5faba546 ("IB/ipoib: Report SG feature regardless of HW UD CSUM capability") added the capability to use SG by default. Rather than override this, the HW supports it, so allow SG. Reviewed-by:
-
Miklos Szeredi authored
commit 59c3b76c upstream. If pos is at the beginning of a page and copied is zero then page is not zeroed but is marked uptodate. Fix by skipping everything except unlock/put of page if zero bytes were copied. Reported-by:
Al Viro <viro@zeniv.linux.org.uk> Fixes: 6b12c1b3 ("fuse: Implement write_begin/write_end callbacks") Signed-off-by:
Miklos Szeredi <mszeredi@redhat.com> Signed-off-by:
-
Thomas Gleixner authored
commit 7ee7e87d upstream. The type flags in the irq descriptor are there for historical reasons and only updated via irq_modify_status() or irq_set_type(). Both functions also update the type flags in irqdata. __setup_irq() is the only left over user of the type flags in the irq descriptor. If __setup_irq() is called with empty irq type flags, then the type flags are retrieved from irqdata. If an interrupt is shared, then the type flags are compared with the type flags stored in the irq descriptor. On x86 the ioapic does not have a irq_set_type() callback because the type is defined in the BIOS tables and cannot be changed. The type is stored in irqdata at setup time without updating the type data in the irq descriptor. As a result the comparison described above fails. There is no point in updating the irq descriptor flags because the only relevant storage is irqdata. Use the type flags from irqdata for both retrieval and comparison in __setup_irq() instead. Aside of that the print out in case of non matching type flags has the old and new type flags arguments flipped. Fix that as well. For correctness sake the flags stored in the irq descriptor should be removed, but this is beyond the scope of this bugfix and will be done in a later patch. Fixes: 4b357dae ("genirq: Look-up trigger type if not specified by caller") Reported-and-tested-by:
Thomas Gleixner <tglx@linutronix.de> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Jon Hunter <jonathanh@nvidia.com> Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1611072020360.3501@nanosSigned-off-by:
-
Steven Rostedt (Red Hat) authored
commit 546fece4 upstream. When a module is first loaded and its function ip records are added to the ftrace list of functions to modify, they are set to DISABLED, as their text is still in a read only state. When the module is fully loaded, and can be updated, the flag is cleared, and if their's any functions that should be tracing them, it is updated at that moment. But there's several locations that do record accounting and should ignore records that are marked as disabled, or they can cause issues. Alexei already fixed one location, but others need to be addressed. Fixes: b7ffffbb "ftrace: Add infrastructure for delayed enabling of module functions" Reported-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
-
Alexei Starovoitov authored
commit 977c1f9c upstream. ftrace_shutdown() checks for sanity of ftrace records and if dyn_ftrace->flags is not zero, it will warn. It can happen that 'flags' are set to FTRACE_FL_DISABLED at this point, since some module was loaded, but before ftrace_module_enable() cleared the flags for this module. In other words the module.c is doing: ftrace_module_init(mod); // calls ftrace_update_code() that sets flags=FTRACE_FL_DISABLED ... // here ftrace_shutdown() is called that warns, since err = prepare_coming_module(mod); // didn't have a chance to clear FTRACE_FL_DISABLED Fix it by ignoring disabled records. It's similar to what __ftrace_hash_rec_update() is already doing. Link: http://lkml.kernel.org/r/1478560460-3818619-1-git-send-email-ast@fb.com Fixes: b7ffffbb "ftrace: Add infrastructure for delayed enabling of module functions" Signed-off-by:
-
Wei Huang authored
commit b112c84a upstream. KVM calls kvm_pmu_set_counter_event_type() when PMCCFILTR is configured. But this function can't deals with PMCCFILTR correctly because the evtCount bits of PMCCFILTR, which is reserved 0, conflits with the SW_INCR event type of other PMXEVTYPER<n> registers. To fix it, when eventsel == 0, this function shouldn't return immediately; instead it needs to check further if select_idx is ARMV8_PMU_CYCLE_IDX. Another issue is that KVM shouldn't copy the eventsel bits of PMCCFILTER blindly to attr.config. Instead it ought to convert the request to the "cpu cycle" event type (i.e. 0x11). To support this patch and to prevent duplicated definitions, a limited set of ARMv8 perf event types were relocated from perf_event.c to asm/perf_event.h. Acked-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
Wei Huang <wei@redhat.com> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
-
Wei Huang authored
commit 9e3f7a29 upstream. We're missing the handling code for the cycle counter accessed from a 32bit guest, leading to unexpected results. Signed-off-by:
-
Ignacio Alvarado authored
commit 1650b4eb upstream. Function user_notifier_unregister should be called only once for each registered user notifier. Function kvm_arch_hardware_disable can be executed from an IPI context which could cause a race condition with a VCPU returning to user mode and attempting to unregister the notifier. Signed-off-by:
Ignacio Alvarado <ikalvarado@google.com> Fixes: 18863bdd ("KVM: x86 shared msr infrastructure") Reviewed-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
Radim Krčmář <rkrcmar@redhat.com> Signed-off-by:
-
Paolo Bonzini authored
commit 7301d6ab upstream. Reported by syzkaller: [ INFO: suspicious RCU usage. ] 4.9.0-rc4+ #47 Not tainted ------------------------------- ./include/linux/kvm_host.h:536 suspicious rcu_dereference_check() usage! stack backtrace: CPU: 1 PID: 6679 Comm: syz-executor Not tainted 4.9.0-rc4+ #47 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 ffff880039e2f6d0 ffffffff81c2e46b ffff88003e3a5b40 0000000000000000 0000000000000001 ffffffff83215600 ffff880039e2f700 ffffffff81334ea9 ffffc9000730b000 0000000000000004 ffff88003c4f8420 ffff88003d3f8000 Call Trace: [< inline >] __dump_stack lib/dump_stack.c:15 [<ffffffff81c2e46b>] dump_stack+0xb3/0x118 lib/dump_stack.c:51 [<ffffffff81334ea9>] lockdep_rcu_suspicious+0x139/0x180 kernel/locking/lockdep.c:4445 [< inline >] __kvm_memslots include/linux/kvm_host.h:534 [< inline >] kvm_memslots include/linux/kvm_host.h:541 [<ffffffff8105d6ae>] kvm_gfn_to_hva_cache_init+0xa1e/0xce0 virt/kvm/kvm_main.c:1941 [<ffffffff8112685d>] kvm_lapic_set_vapic_addr+0xed/0x140 arch/x86/kvm/lapic.c:2217 Reported-by:
Dmitry Vyukov <dvyukov@google.com> Fixes: fda4e2e8 Cc: Andrew Honig <ahonig@google.com> Signed-off-by:
David Hildenbrand <david@redhat.com> Signed-off-by:
-
Yazen Ghannam authored
commit b0b6e868 upstream. cpu_llc_id (Last Level Cache ID) derivation on AMD Fam17h has an underflow bug when extracting the socket_id value. It starts from 0 so subtracting 1 from it will result in an invalid value. This breaks scheduling topology later on since the cpu_llc_id will be incorrect. For example, the the cpu_llc_id of the *other* CPU in the loops in set_cpu_sibling_map() underflows and we're generating the funniest thread_siblings masks and then when I run 8 threads of nbench, they get spread around the LLC domains in a very strange pattern which doesn't give you the normal scheduling spread one would expect for performance. Other things like EDAC use cpu_llc_id so they will be b0rked too. So, the APIC ID is preset in APICx020 for bits 3 and above: they contain the core complex, node and socket IDs. The LLC is at the core complex level so we can find a unique cpu_llc_id by right shifting the APICID by 3 because then the least significant bit will be the Core Complex ID. Tested-by:
Yazen Ghannam <Yazen.Ghannam@amd.com> [ Cleaned up and extended the commit message. ] Signed-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
- 21 Nov, 2016 2 commits
-
-
Greg Kroah-Hartman authored
-
Michal Nazarewicz authored
commit a9e6f83c upstream. ffs_func_eps_disable is called from atomic context so it cannot sleep thus cannot grab a mutex. Change the handling of epfile->read_buffer to use non-sleeping synchronisation method. Reported-by:
Chen Yu <chenyu56@huawei.com> Signed-off-by:
Michał Nazarewicz <mina86@mina86.com> Fixes: 9353afbb ("buffer data from ‘oversized’ OUT requests") Tested-by:
John Stultz <john.stultz@linaro.org> Tested-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
