A disconnect may just suspend the hub in absence of a physical
disconnect detection. If we start rejecting requests, the mass
storage function gets into a spin trying to requeue the same
request for ever and hangs.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>

When stalling EP0, we need to wait for an ACK interrupt,
otherwise we may get out of sync on the next setup packet
data phase. Also we need to ignore the direction when
processing that interrupt as the HW reports a potential
mismatch.

Implement this by adding a stall state to EP0. This fixes
some reported issues with mass storage and some hosts.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>

Otherwise, we can have a stale state after a disconnect and reconnect
causing errors on the first SETUP packet to the device.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>

This bit should be only set when the port enable goes down, for
example, on errors. Not when it gets set after a port reset. Some
USB stacks seem to be sensitive to this and fails enumeration.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>

Use clk_bulk_prepare_enable() and clk_bulk_disable_unprepare() to
simplify code a bit. No functional change intended.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-usb@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>

Use devres to get clocks and drop explicit clock freeing. No
functional change intended.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-usb@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>

Commit 08f871a3 ("usb: dwc3: host: convey the PHYs to xhci") added
forwarding of the generic PHYs from DWC3 core to the instantiated XHCI-plat
device. However XHCI(-plat) driver never gained support for generic PHYs,
thus the lookup added by that commit is never used. In meantime the commit
d64ff406 ("usb: dwc3: use bus->sysdev for DMA configuration")
incorrectly changed the device used for creating lookup, making the lookup
useless and generic PHYs inaccessible from XHCI device.

However since commit 178a0bce ("usb: core: hcd: integrate the PHY
wrapper into the HCD core") USB HCD already handles generic PHYs acquired
from the HCD's 'sysdev', which in this case is DWC3 core device. This means
that creating any custom lookup entries for XHCI driver is no longer needed
and can be simply removed.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>

Starting from DWC_usb31 version 1.90a and later, the DCTL.CSFRST bit
will not be cleared until after all the internal clocks are synchronized
during soft-reset. This may take a little more than 50ms. Set the
polling rate at 20ms instead.
Signed-off-by: Thinh Nguyen <thinhn@synopsys.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>

This enum is only used in drivers/usb/dwc3/dwc3-omap3.c
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>

Use use device_property_count_u32() directly, that makes code neater.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>

Instead of using to_pci_dev + pci_get_drvdata,
use dev_get_drvdata to make code simpler.
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>

Use use device_property_count_u32() directly, that makes code neater.
Acked-by: Minas Harutyunyan <hminas@synopsys.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>

Use devm_platform_ioremap_resource() to simplify the code a bit.
This is detected by coccinelle.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>

Use devm_platform_ioremap_resource() to simplify the code a bit.
This is detected by coccinelle.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>

Use devm_platform_ioremap_resource() to simplify the code a bit.
This is detected by coccinelle.
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>

When a gadget is disabled, kill_all_requests() can be called
simultaneously from both a user process via dwc2_hsotg_pullup() and from
the interrupt handler if the hardware detects disconnection.

Since we drop the lock in dwc2_hsotg_complete_request() in order to call
the completion handler, this means that the list is modified
concurrently and leads to an infinite loop in kill_all_requests().

Replace the foreach loop with a while-not-empty loop in order to remove
the danger of this concurrent modification.

Note: I observed this with threadirqs, I'm not sure if it can be
triggered without threaded interrupts.
Signed-off-by: John Keeping <john@metanate.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>

Mark switch cases where we are expecting to fall through.

This patch fixes the following warning (Building: at91_dt_defconfig arm):

drivers/usb/gadget/udc/atmel_usba_udc.c:329:13: warning: this statement may fall through [-Wimplicit-fallthrough=]
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>

Mark switch cases where we are expecting to fall through.

This patch fixes the following warning (Building: tct_hammer_defconfig arm):

drivers/usb/gadget/udc/s3c2410_udc.c:314:7: warning: this statement may fall through [-Wimplicit-fallthrough=]
drivers/usb/gadget/udc/s3c2410_udc.c:418:7: warning: this statement may fall through [-Wimplicit-fallthrough=]
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>

Pull tpm fixes from Jarkko Sakkinen:
 "Two bug fixes that did not make into my first pull request"

* tag 'tpmdd-next-20190805' of git://git.infradead.org/users/jjs/linux-tpmdd:
  tpm: tpm_ibm_vtpm: Fix unallocated banks
  tpm: Fix null pointer dereference on chip register error path

Pull MTD fixes from Miquel Raynal:
 "NAND:

   - Fix Micron driver as some chips enable internal ECC correction
     during their discovery while they advertize they do not have any.

  Hyperbus:

   - Restrict the build to only ARM64 SoCs (and compile testing) which
     is what should have been done since the beginning.

   - Fix Kconfig issue by selection something instead of implying it"

* tag 'mtd/fixes-for-5.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
  mtd: hyperbus: Add hardware dependency to AM654 driver
  mtd: hyperbus: Kconfig: Fix HBMC_AM654 dependencies
  mtd: rawnand: micron: handle on-die "ECC-off" devices correctly

The nr_allocated_banks and allocated banks are initialized as part of
tpm_chip_register. Currently, this is done as part of auto startup
function. However, some drivers, like the ibm vtpm driver, do not run
auto startup during initialization. This results in uninitialized memory
issue and causes a kernel panic during boot.

This patch moves the pcr allocation outside the auto startup function
into tpm_chip_register. This ensures that allocated banks are initialized
in any case.

Fixes: 879b5892 ("tpm: retrieve digest size of unknown algorithms with PCR read")
Reported-by: Michal Suchanek <msuchanek@suse.de>
Signed-off-by: Nayna Jain <nayna@linux.ibm.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Tested-by: Sachin Sant <sachinp@linux.vnet.ibm.com>
Tested-by: Michal Suchánek <msuchanek@suse.de>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>

If clk_enable is not defined and chip initialization
is canceled code hits null dereference.

Easily reproducible with vTPM init fail:
  swtpm chardev --tpmstate dir=nonexistent_dir --tpm2 --vtpm-proxy

BUG: kernel NULL pointer dereference, address: 00000000
...
Call Trace:
 tpm_chip_start+0x9d/0xa0 [tpm]
 tpm_chip_register+0x10/0x1a0 [tpm]
 vtpm_proxy_work+0x11/0x30 [tpm_vtpm_proxy]
 process_one_work+0x214/0x5a0
 worker_thread+0x134/0x3e0
 ? process_one_work+0x5a0/0x5a0
 kthread+0xd4/0x100
 ? process_one_work+0x5a0/0x5a0
 ? kthread_park+0x90/0x90
 ret_from_fork+0x19/0x24

Fixes: 719b7d81 ("tpm: introduce tpm_chip_start() and tpm_chip_stop()")
Cc: stable@vger.kernel.org # v5.1+
Signed-off-by: Milan Broz <gmazyland@gmail.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>

Pull powerpc fixes from Michael Ellerman:
 "Some more powerpc fixes for 5.3:

   - Wire up the new clone3 syscall.

   - A fix for the PAPR SCM nvdimm driver, to fix a crash when firmware
     gives us a device that's attached to a non-online NUMA node.

   - A fix for a boot failure on 32-bit with KASAN enabled.

   - Three fixes for implicit fall through warnings, some of which are
     errors for us due to -Werror.

  Thanks to: Aneesh Kumar K.V, Christophe Leroy, Kees Cook, Santosh
  Sivaraj, Stephen Rothwell"

* tag 'powerpc-5.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/kasan: fix early boot failure on PPC32
  drivers/macintosh/smu.c: Mark expected switch fall-through
  powerpc/spe: Mark expected switch fall-throughs
  powerpc/nvdimm: Pick nearby online node if the device node is not online
  powerpc/kvm: Fall through switch case explicitly
  powerpc: Wire up clone3 syscall

At the end of the v5.3 upstream kernel development cycle, Simon will be
stepping down from his role as Renesas SoC maintainer.  Starting with
the v5.4 development cycle, Geert is taking over this role.

Add Geert as a co-maintainer, and add his git repository and branch.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'kbuild-fixes-v5.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - detect missing missing "WITH Linux-syscall-note" for uapi headers

 - fix needless rebuild when using Clang

 - fix false-positive cc-option in Kconfig when using Clang

 - avoid including corrupted .*.cmd files in the modpost stage

 - fix warning of 'make vmlinux'

 - fix {m,n,x,g}config to not generate the broken .config on the second
   save operation.

 - some trivial Makefile fixes

* tag 'kbuild-fixes-v5.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kconfig: Clear "written" flag to avoid data loss
  kbuild: Check for unknown options with cc-option usage in Kconfig and clang
  lib/raid6: fix unnecessary rebuild of vpermxor*.c
  kbuild: modpost: do not parse unnecessary rules for vmlinux modpost
  kbuild: modpost: remove unnecessary dependency for __modpost
  kbuild: modpost: handle KBUILD_EXTRA_SYMBOLS only for external modules
  kbuild: modpost: include .*.cmd files only when targets exist
  kbuild: initialize CLANG_FLAGS correctly in the top Makefile
  kbuild: detect missing "WITH Linux-syscall-note" for uapi headers

Pull SafeSetID maintainer update from Micah Morton:
 "Add entry in MAINTAINERS file for SafeSetID LSM"

* tag 'safesetid-maintainers-correction-5.3-rc2' of git://github.com/micah-morton/linux:
  Add entry in MAINTAINERS file for SafeSetID LSM

Prior to this commit, starting nconfig, xconfig or gconfig, and saving
the .config file more than once caused data loss, where a .config file
that contained only comments would be written to disk starting from the
second save operation.

This bug manifests itself because the SYMBOL_WRITTEN flag is never
cleared after the first call to conf_write, and subsequent calls to
conf_write then skip all of the configuration symbols due to the
SYMBOL_WRITTEN flag being set.

This commit resolves this issue by clearing the SYMBOL_WRITTEN flag
from all symbols before conf_write returns.

Fixes: 8e2442a5 ("kconfig: fix missing choice values in auto.conf")
Cc: linux-stable <stable@vger.kernel.org> # 4.19+
Signed-off-by: M. Vefa Bicakci <m.v.b@runbox.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Pull Xtensa fix from Max Filippov:
 "Fix build for xtensa cores with coprocessors that was broken by
  entry/return abstraction patch"

* tag 'xtensa-20190803' of git://github.com/jcmvbkbc/linux-xtensa:
  xtensa: fix build for cores with coprocessors

Pull i2c fixes from Wolfram Sang:
 "A set of driver fixes for the I2C subsystem"

* 'i2c/for-current-fixed' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: s3c2410: Mark expected switch fall-through
  i2c: at91: fix clk_offset for sama5d2
  i2c: at91: disable TXRDY interrupt after sending data
  i2c: iproc: Fix i2c master read more than 63 bytes
  eeprom: at24: make spd world-readable again

Pull perf tooling fixes from Thomas Gleixner:
 "A set of updates for perf tools and documentation:

  perf header:
    - Prevent a division by zero
    - Deal with an uninitialized warning proper

  libbpf:
    - Fix the missiong __WORDSIZE definition for musl & al

  UAPI headers:
    - Synchronize kernel headers

  Documentation:
    - Fix the memory units for perf.data size"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  libbpf: fix missing __WORDSIZE definition
  perf tools: Fix perf.data documentation units for memory size
  perf header: Fix use of unitialized value warning
  perf header: Fix divide by zero error if f_header.attr_size==0
  tools headers UAPI: Sync if_link.h with the kernel
  tools headers UAPI: Sync sched.h with the kernel
  tools headers UAPI: Sync usbdevice_fs.h with the kernels to get new ioctl
  tools perf beauty: Fix usbdevfs_ioctl table generator to handle _IOC()
  tools headers UAPI: Update tools's copy of drm.h headers
  tools headers UAPI: Update tools's copy of mman.h headers
  tools headers UAPI: Update tools's copy of kvm.h headers
  tools include UAPI: Sync x86's syscalls_64.tbl and generic unistd.h to pick up clone3 and pidfd_open

Pull vdso timer fixes from Thomas Gleixner:
 "A series of commits to deal with the regression caused by the generic
  VDSO implementation.

  The usage of clock_gettime64() for 32bit compat fallback syscalls
  caused seccomp filters to kill innocent processes because they only
  allow clock_gettime().

  Handle the compat syscalls with clock_gettime() as before, which is
  not a functional problem for the VDSO as the legacy compat application
  interface is not y2038 safe anyway. It's just extra fallback code
  which needs to be implemented on every architecture.

  It's opt in for now so that it does not break the compile of already
  converted architectures in linux-next. Once these are fixed, the
  #ifdeffery goes away.

  So much for trying to be smart and reuse code..."

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  arm64: compat: vdso: Use legacy syscalls as fallback
  x86/vdso/32: Use 32bit syscall fallback
  lib/vdso/32: Provide legacy syscall fallbacks
  lib/vdso: Move fallback invocation to the callers
  lib/vdso/32: Remove inconsistent NULL pointer checks

Pull irq fixes from Thomas Gleixner:
 "A small bunch of fixes from the irqchip department:

   - Fix a couple of UAF on error paths (RZA1, GICv3 ITS)

   - Fix iMX GPCv2 trigger setting

   - Add missing of_node_put() on error path in MBIGEN

   - Add another bunch of /* fall-through */ to silence warnings"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/renesas-rza1: Fix an use-after-free in rza1_irqc_probe()
  irqchip/irq-imx-gpcv2: Forward irq type to parent
  irqchip/irq-mbigen: Add of_node_put() before return
  irqchip/gic-v3-its: Free unused vpt_page when alloc vpe table fail
  irqchip/gic-v3: Mark expected switch fall-through

Pull xfs fixes from Darrick Wong:

 - Avoid leaking kernel stack contents to userspace

 - Fix a potential null pointer dereference in the dabtree scrub code

* tag 'xfs-5.3-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: Fix possible null-pointer dereferences in xchk_da_btree_block_check_sibling()
  xfs: fix stack contents leakage in the v1 inumber ioctls

Merge misc fixes from Andrew Morton:
 "17 fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  drivers/acpi/scan.c: document why we don't need the device_hotplug_lock
  memremap: move from kernel/ to mm/
  lib/test_meminit.c: use GFP_ATOMIC in RCU critical section
  asm-generic: fix -Wtype-limits compiler warnings
  cgroup: kselftest: relax fs_spec checks
  mm/memory_hotplug.c: remove unneeded return for void function
  mm/migrate.c: initialize pud_entry in migrate_vma()
  coredump: split pipe command whitespace before expanding template
  page flags: prioritize kasan bits over last-cpuid
  ubsan: build ubsan.c more conservatively
  kasan: remove clang version check for KASAN_STACK
  mm: compaction: avoid 100% CPU usage during compaction when a task is killed
  mm: migrate: fix reference check race between __find_get_block() and migration
  mm: vmscan: check if mem cgroup is disabled or not before calling memcg slab shrinker
  ocfs2: remove set but not used variable 'last_hash'
  Revert "kmemleak: allow to coexist with fault injection"
  kernel/signal.c: fix a kernel-doc markup

Pull RISC-V fixes from Paul Walmsley:
 "Three minor RISC-V-related changes for v5.3-rc3:

   - Add build ID to VDSO builds to avoid a double-free in perf when
     libelf isn't used

   - Align the RV64 defconfig to the output of "make savedefconfig" so
     subsequent defconfig patches don't get out of hand

   - Drop a superfluous DT property from the FU540 SoC DT data (since it
     must be already set in board data that includes it)"

* tag 'riscv/for-v5.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: defconfig: align RV64 defconfig to the output of "make savedefconfig"
  riscv: dts: fu540-c000: drop "timebase-frequency"
  riscv: Fix perf record without libelf support

Let's document why the lock is not needed in acpi_scan_init(), right now
this is not really obvious.

[akpm@linux-foundation.org: fix tpyo]
Link: http://lkml.kernel.org/r/20190731135306.31524-1-david@redhat.comSigned-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

memremap.c implements MM functionality for ZONE_DEVICE, so it really
should be in the mm/ directory, not the kernel/ one.

Link: http://lkml.kernel.org/r/20190722094143.18387-1-hch@lst.deSigned-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kmalloc() shouldn't sleep while in RCU critical section, therefore use
GFP_ATOMIC instead of GFP_KERNEL.

The bug was spotted by the 0day kernel testing robot.

Link: http://lkml.kernel.org/r/20190725121703.210874-1-glider@google.com
Fixes: 7e659650cbda ("lib: introduce test_meminit module")
Signed-off-by: Alexander Potapenko <glider@google.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit d66acc39 ("bitops: Optimise get_order()") introduced a
compilation warning because "rx_frag_size" is an "ushort" while
PAGE_SHIFT here is 16.

The commit changed the get_order() to be a multi-line macro where
compilers insist to check all statements in the macro even when
__builtin_constant_p(rx_frag_size) will return false as "rx_frag_size"
is a module parameter.

In file included from ./arch/powerpc/include/asm/page_64.h:107,
                 from ./arch/powerpc/include/asm/page.h:242,
                 from ./arch/powerpc/include/asm/mmu.h:132,
                 from ./arch/powerpc/include/asm/lppaca.h:47,
                 from ./arch/powerpc/include/asm/paca.h:17,
                 from ./arch/powerpc/include/asm/current.h:13,
                 from ./include/linux/thread_info.h:21,
                 from ./arch/powerpc/include/asm/processor.h:39,
                 from ./include/linux/prefetch.h:15,
                 from drivers/net/ethernet/emulex/benet/be_main.c:14:
drivers/net/ethernet/emulex/benet/be_main.c: In function 'be_rx_cqs_create':
./include/asm-generic/getorder.h:54:9: warning: comparison is always
true due to limited range of data type [-Wtype-limits]
   (((n) < (1UL << PAGE_SHIFT)) ? 0 :  \
         ^
drivers/net/ethernet/emulex/benet/be_main.c:3138:33: note: in expansion
of macro 'get_order'
  adapter->big_page_size = (1 << get_order(rx_frag_size)) * PAGE_SIZE;
                                 ^~~~~~~~~

Fix it by moving all of this multi-line macro into a proper function,
and killing __get_order() off.

[akpm@linux-foundation.org: remove __get_order() altogether]
[cai@lca.pw: v2]
  Link: http://lkml.kernel.org/r/1564000166-31428-1-git-send-email-cai@lca.pw
Link: http://lkml.kernel.org/r/1563914986-26502-1-git-send-email-cai@lca.pw
Fixes: d66acc39 ("bitops: Optimise get_order()")
Signed-off-by: Qian Cai <cai@lca.pw>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: David Howells <dhowells@redhat.com>
Cc: Jakub Jelinek <jakub@redhat.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Bill Wendling <morbo@google.com>
Cc: James Y Knight <jyknight@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>