- 07 Aug, 2019 7 commits
-
-
Quinn Tran authored
A hang was observed in the fcport delete path when the device was responding slow and an issue-lip path (results in session termination) was taken. Fix this by issuing logo requests unconditionally. PID: 19491 TASK: ffff8e23e67bb150 CPU: 0 COMMAND: "kworker/0:0" #0 [ffff8e2370297bf8] __schedule at ffffffffb4f7dbb0 #1 [ffff8e2370297c88] schedule at ffffffffb4f7e199 #2 [ffff8e2370297c98] schedule_timeout at ffffffffb4f7ba68 #3 [ffff8e2370297d40] msleep at ffffffffb48ad9ff #4 [ffff8e2370297d58] qlt_free_session_done at ffffffffc0c32052 [qla2xxx] #5 [ffff8e2370297e20] process_one_work at ffffffffb48bcfdf #6 [ffff8e2370297e68] worker_thread at ffffffffb48bdca6 #7 [ffff8e2370297ec8] kthread at ffffffffb48c4f81 Signed-off-by:
Quinn Tran <qutran@marvell.com> Signed-off-by:
Himanshu Madhani <hmadhani@marvell.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com>
-
Andrew Vasquez authored
Leverage the generic routine, qla24xx_update_fw_options(), for the configuration of firmware options for ISP27xx/ISP28xx. Signed-off-by:
Andrew Vasquez <andrewv@marvell.com> Signed-off-by:
-
Arun Easi authored
The following sequence of event leads to NVME port disappearing: - device port shut - nvme_fc_unregister_remoteport - device port online - remote port delete completes - relogin is scheduled - "post gidpn" message appears due to rscn generation # mismatch In short, if a device comes back online sooner than an unregister completion, a mismatch in rscn generation number occurs, which is not handled correctly during device relogin. Fix this by starting with a redo of GNL. When ql2xextended_error_logging is enabled, the re-plugged device's discovery stops with the following messages printed: --8<-- qla2xxx [0000:41:00.0]-480d:3: Relogin scheduled. qla2xxx [0000:41:00.0]-4800:3: DPC handler sleeping. qla2xxx [0000:41:00.0]-2902:3: qla24xx_handle_relogin_event 21:00:00:24:ff:17:9e:91 DS 0 LS 7 P 0 del 2 cnfl (null) rscn 1|2 login 1|2 fl 1 qla2xxx [0000:41:00.0]-28e9:3: qla24xx_handle_relogin_event 1666 21:00:00:24:ff:17:9e:91 post gidpn qla2xxx [0000:41:00.0]-480e:3: Relogin end. --8<-- Signed-off-by:Arun Easi <aeasi@marvell.com> Signed-off-by:
-
Andrew Vasquez authored
Current code misses or fails to account for proper recovery during early initialization failures: - Properly unwind allocations during probe() failures. - Protect against non-initialization memory allocations during unwinding. - Propagate error status during HW initialization. - Release SCSI host reference when memory allocations fail. Signed-off-by:
-
Quinn Tran authored
when fabric scan thread encounters IOCB Q Full, schedule a delayed work to retry fabric scan. Signed-off-by:
-
Quinn Tran authored
For any qla2xxx async command, the SRB buffer is used to send it. In setting up the SRB buffer, the timer for this command is started before all memory allocation has finished. Under low memory pressure, memory alloc can go to sleep and not wake up before the timer expires. Once timer has expired, the timer thread will access uninitialize fields resulting into NULL pointer crash. This patch fixes this crash by moving the start of timer after everything is setup. backtrace shows following PID: 3720 TASK: ffff996928401040 CPU: 0 COMMAND: "qla2xxx_1_dpc" 0 [ffff99652751b698] __schedule at ffffffff965676c7 1 [ffff99652751b728] schedule at ffffffff96567bc9 2 [ffff99652751b738] schedule_timeout at ffffffff965655e8 3 [ffff99652751b7e0] io_schedule_timeout at ffffffff9656726d 4 [ffff99652751b810] congestion_wait at ffffffff95fd8d12 5 [ffff99652751b870] isolate_migratepages_range at ffffffff95fddaf3 6 [ffff99652751b930] compact_zone at ffffffff95fdde96 7 [ffff99652751b980] compact_zone_order at ffffffff95fde0bc 8 [ffff99652751ba20] try_to_compact_pages at ffffffff95fde481 9 [ffff99652751ba80] __alloc_pages_direct_compact at ffffffff9655cc31 10 [ffff99652751bae0] __alloc_pages_slowpath at ffffffff9655d101 11 [ffff99652751bbd0] __alloc_pages_nodemask at ffffffff95fc0e95 12 [ffff99652751bc80] dma_generic_alloc_coherent at ffffffff95e3217f 13 [ffff99652751bcc8] x86_swiotlb_alloc_coherent at ffffffff95e6b7a1 14 [ffff99652751bcf8] qla2x00_rft_id at ffffffffc055b5e0 [qla2xxx] 15 [ffff99652751bd50] qla2x00_loop_resync at ffffffffc0533e71 [qla2xxx] 16 [ffff99652751be68] qla2x00_do_dpc at ffffffffc05210ca [qla2xxx] PID: 0 TASK: ffffffff96a18480 CPU: 0 COMMAND: "swapper/0" 0 [ffff99652fc03ae0] machine_kexec at ffffffff95e63674 1 [ffff99652fc03b40] __crash_kexec at ffffffff95f1ce12 2 [ffff99652fc03c10] crash_kexec at ffffffff95f1cf00 3 [ffff99652fc03c28] oops_end at ffffffff9656c758 4 [ffff99652fc03c50] no_context at ffffffff9655aa7e 5 [ffff99652fc03ca0] __bad_area_nosemaphore at ffffffff9655ab15 6 [ffff99652fc03cf0] bad_area_nosemaphore at ffffffff9655ac86 7 [ffff99652fc03d00] __do_page_fault at ffffffff9656f6b0 8 [ffff99652fc03d70] do_page_fault at ffffffff9656f915 9 [ffff99652fc03da0] page_fault at ffffffff9656b758 [exception RIP: unknown or invalid address] RIP: 0000000000000000 RSP: ffff99652fc03e50 RFLAGS: 00010202 RAX: 0000000000000000 RBX: ffff99652b79a600 RCX: ffff99652b79a760 RDX: ffff99652b79a600 RSI: ffffffffc0525ad0 RDI: ffff99652b79a600 RBP: ffff99652fc03e60 R8: ffffffff96a18a18 R9: ffffffff96ee3c00 R10: 0000000000000002 R11: ffff99652fc03de8 R12: ffff99652b79a760 R13: 0000000000000100 R14: ffffffffc0525ad0 R15: ffff99652b79a600 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 10 [ffff99652fc03e50] qla2x00_sp_timeout at ffffffffc0525af8 [qla2xxx] 11 [ffff99652fc03e68] call_timer_fn at ffffffff95ea7f58 12 [ffff99652fc03ea0] run_timer_softirq at ffffffff95eaa3bd 13 [ffff99652fc03f18] __do_softirq at ffffffff95ea0f05 14 [ffff99652fc03f88] call_softirq at ffffffff9657832c 15 [ffff99652fc03fa0] do_softirq at ffffffff95e2e675 16 [ffff99652fc03fc0] irq_exit at ffffffff95ea1285 17 [ffff99652fc03fd8] smp_apic_timer_interrupt at ffffffff965796c8 18 [ffff99652fc03ff0] apic_timer_interrupt at ffffffff96575df2 Signed-off-by: -
Quinn Tran authored
Relogin fails to move forward due to scan_state flag indicating device is not there. Before relogin process, Session delete process accidently modified the scan_state flag. [mkp: typos plus corrected Fixes: sha as reported by sfr] Fixes: 2dee5521 ("scsi: qla2xxx: Fix login state machine freeze") Cc: stable@vger.kernel.org Signed-off-by:
-
- 30 Jul, 2019 17 commits
-
-
Quinn Tran authored
Reject eh_{abort|device_reset|target_reset} when rport is being torn down or chip is down. Signed-off-by:Quinn Tran <quinn.tran@cavium.com> Signed-off-by:
-
Quinn Tran authored
Firmware dump captured during LOOP Init error does not yield any significant information. This patch removes call to trigger firmware dump collection during Loop Initialization. Signed-off-by:
-
Quinn Tran authored
For target mode, the default number of Q-Pairs allowed to use is 2. If the number of Q-Pairs allocated is lower than the default Q-Pairs, then lower value should be the set as default. [mkp: typo] Signed-off-by:
-
Quinn Tran authored
If an abort times out, the Abort IOCB completion and Abort timer can race against each other. This patch provides unique error code for timer path to allow proper cleanup. [mkp: typo] Signed-off-by:
-
Quinn Tran authored
[ 17.177276] qla2xxx 0000:05:00.0: DMA-API: device driver frees DMA memory with different size [device address=0x00000006198b0000] [map size=32784 bytes] [unmap size=8208 bytes] [ 17.177390] RIP: 0010:check_unmap+0x7a2/0x1750 [ 17.177425] Call Trace: [ 17.177438] debug_dma_free_coherent+0x1b5/0x2d5 [ 17.177470] dma_free_attrs+0x7f/0x140 [ 17.177489] qla24xx_sp_unmap+0x1e2/0x610 [qla2xxx] [ 17.177509] qla24xx_async_gnnft_done+0x9c6/0x17d0 [qla2xxx] [ 17.177535] qla2x00_do_work+0x514/0x2200 [qla2xxx] Fixes: b5f3bc39 ("scsi: qla2xxx: Fix inconsistent DMA mem alloc/free") Signed-off-by: -
Himanshu Madhani authored
With debug kernel we see following wanings indicating memory leak. [28809.523959] WARNING: CPU: 3 PID: 6790 at lib/dma-debug.c:978 dma_debug_device_change+0x166/0x1d0 [28809.523964] pci 0000:0c:00.6: DMA-API: device driver has pending DMA allocations while released from device [count=5] [28809.523964] One of leaked entries details: [device address=0x00000002aefe4000] [size=8208 bytes] [mapped with DMA_BIDIRECTIONAL] [mapped as coherent] Fix this by unmapping DMA memory. Signed-off-by:
-
Minwoo Im authored
We can request task management IOCTL command(MPI2_FUNCTION_SCSI_TASK_MGMT) to /dev/mpt3ctl. If the given task_type is either abort task or query task, it may need a field named "Initiator Port Transfer Tag to Manage" in the IU. Current code does not support to check target IPTT tag from the tm_request. This patch introduces to check TaskMID given from the userspace as a target tag. We have a rule of relationship between (struct request *req->tag) and smid in mpt3sas_base.c: 3318 u16 3319 mpt3sas_base_get_smid_scsiio(struct MPT3SAS_ADAPTER *ioc, u8 cb_idx, 3320 struct scsi_cmnd *scmd) 3321 { 3322 struct scsiio_tracker *request = scsi_cmd_priv(scmd); 3323 unsigned int tag = scmd->request->tag; 3324 u16 smid; 3325 3326 smid = tag + 1; So if we want to abort a request tagged #X, then we can pass (X + 1) to this IOCTL handler. Otherwise, user space just can pass 0 TaskMID to abort the first outstanding smid which is legacy behaviour. Cc: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Cc: Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com> Cc: Sathya Prakash <sathya.prakash@broadcom.com> Cc: James E.J. Bottomley <jejb@linux.ibm.com> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: MPT-FusionLinux.pdl@broadcom.com Signed-off-by:Minwoo Im <minwoo.im@samsung.com> Acked-by:
Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by:
Minwoo Im <minwoo.im.dev@gmail.com> Signed-off-by:
-
Gustavo A. R. Silva authored
Mark switch cases where we are expecting to fall through. This patch fixes the following warnings (Building: powerpc allyesconfig): drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.c: In function 'ibmvscsis_adapter_info': drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.c:1582:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if (connection_broken(vscsi)) ^ drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.c:1584:2: note: here default: ^~~~~~~ drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.c: In function 'ibmvscsis_ping_response': drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.c:2494:16: warning: this statement may fall through [-Wimplicit-fallthrough=] vscsi->flags |= CLIENT_FAILED; drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.c:2495:2: note: here case H_DROPPED: ^~~~ drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.c:2496:16: warning: this statement may fall through [-Wimplicit-fallthrough=] vscsi->flags |= RESPONSE_Q_DOWN; drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.c:2497:2: note: here case H_REMOTE_PARM: ^~~~ Reported-by:Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by:
Kees Cook <keescook@chromium.org> Reviewed-by:
Bryant G. Ly <bly@catalogicsoftware.com> Signed-off-by:
-
Gustavo A. R. Silva authored
Mark switch cases where we are expecting to fall through. This patch fixes the following warnings: drivers/scsi/cxlflash/main.c: In function 'send_afu_cmd': drivers/scsi/cxlflash/main.c:2347:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if (rc) { ^ drivers/scsi/cxlflash/main.c:2357:2: note: here case -EAGAIN: ^~~~ drivers/scsi/cxlflash/main.c: In function 'term_intr': drivers/scsi/cxlflash/main.c:754:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if (index == PRIMARY_HWQ) ^ drivers/scsi/cxlflash/main.c:756:2: note: here case UNMAP_TWO: ^~~~ drivers/scsi/cxlflash/main.c:757:3: warning: this statement may fall through [-Wimplicit-fallthrough=] cfg->ops->unmap_afu_irq(hwq->ctx_cookie, 2, hwq); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/scsi/cxlflash/main.c:758:2: note: here case UNMAP_ONE: ^~~~ drivers/scsi/cxlflash/main.c:759:3: warning: this statement may fall through [-Wimplicit-fallthrough=] cfg->ops->unmap_afu_irq(hwq->ctx_cookie, 1, hwq); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/scsi/cxlflash/main.c:760:2: note: here case FREE_IRQ: ^~~~ drivers/scsi/cxlflash/main.c: In function 'cxlflash_remove': drivers/scsi/cxlflash/main.c:975:3: warning: this statement may fall through [-Wimplicit-fallthrough=] cxlflash_release_chrdev(cfg); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/scsi/cxlflash/main.c:976:2: note: here case INIT_STATE_SCSI: ^~~~ drivers/scsi/cxlflash/main.c:978:3: warning: this statement may fall through [-Wimplicit-fallthrough=] scsi_remove_host(cfg->host); ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/scsi/cxlflash/main.c:979:2: note: here case INIT_STATE_AFU: ^~~~ drivers/scsi/cxlflash/main.c:980:3: warning: this statement may fall through [-Wimplicit-fallthrough=] term_afu(cfg); ^~~~~~~~~~~~~ drivers/scsi/cxlflash/main.c:981:2: note: here case INIT_STATE_PCI: ^~~~ drivers/scsi/cxlflash/main.c:983:3: warning: this statement may fall through [-Wimplicit-fallthrough=] pci_disable_device(pdev); ^~~~~~~~~~~~~~~~~~~~~~~~ drivers/scsi/cxlflash/main.c:984:2: note: here case INIT_STATE_NONE: ^~~~ drivers/scsi/cxlflash/main.c: In function 'num_hwqs_store': drivers/scsi/cxlflash/main.c:3018:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if (cfg->state == STATE_NORMAL) ^ drivers/scsi/cxlflash/main.c:3020:2: note: here default: ^~~~~~~ Reported-by:Matthew R. Ochs <mrochs@linux.ibm.com> Signed-off-by:
-
Dan Carpenter authored
There is a copy and paste bug here. It uses EVENT_TRIGGERS size instead of SCSI_TRIGGERS size but fortunately both size are 84 bytes so it doesn't affect runtime. These days the preferred style is to just say sizeof(object) instead of sizeof(type) so I have updated the function to the latest style as well. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
-
Andy Shevchenko authored
We can use for_each_set_bit() to slightly simplify the code. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
Chuhong Yuan authored
Use vzalloc instead of using vmalloc to allocate memory and then zeroing it with memset. This simplifies the code. Signed-off-by:
Chuhong Yuan <hslester96@gmail.com> Acked-by:
-
Sergei Shtylyov authored
Commit 1697c6a6 ("scsi: fdomain: Add register definitions") somehow missed the uses of CFG1_IRQ_MASK in the Futire Domain ISA driver, leaving the magic numbers intact. Fix this issue (with no change in the generated object file), removing an excess empty line, while at it... Fixes: 1697c6a6 ("scsi: fdomain: Add register definitions") Signed-off-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by:
-
Sergei Shtylyov authored
Commit 1697c6a6 ("scsi: fdomain: Add register definitions") somehow missed the masking of the 'status' variable with the SCSI phase mask in fdomain_work(), leaving the magic number intact. Fix this issue; while at it, change the order of BSTAT_{MSG|CMD|IO} bits in the MESSAGE IN phase *case* (with no change in the generated object file). Fixes: 1697c6a6 ("scsi: fdomain: Add register definitions") Signed-off-by:
-
Sergei Shtylyov authored
Commit 1697c6a6 ("scsi: fdomain: Add register definitions") somehow missed the use of BCTL_RST in fdomain_reset(), leaving the magic number intact. Fix this issue (with no change in the generated object file). Fixes: 1697c6a6 ("scsi: fdomain: Add register definitions") Signed-off-by:
-
YueHaibing authored
kmem_cache_destroy() can handle NULL pointer correctly, so there is no need to check NULL pointer before calling kmem_cache_destroy(). Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
-
YueHaibing authored
A null check before dma_pool_destroy is redundant, so remove it. This is detected by coccinelle. Signed-off-by:
-
- 22 Jul, 2019 9 commits
-
-
Bean Huo authored
This patch is to change msleep() to usleep_range() based on Documentation/timers/timers-howto.txt. It suggests using usleep_range() for small msec(1ms - 20ms) since msleep() will often sleep longer than desired value. After changing, booting time will be 5ms-10ms faster than before. I tested this change on two different platforms, one has 5ms faster, another one is about 10ms. I think this is different on different platform. Actually, from UFS host side, 1ms-5ms delay is already sufficient for its initialization of the local UIC layer. Fixes: 7a3e97b0 ([SCSI] ufshcd: UFS Host controller driver) Signed-off-by:
Bean Huo <beanhuo@micron.com> Acked-by:
Stanley Chu <stanley.chu@mediatek.com> Reviewed-by:
Avri Altman <avri.altman@wdc.com> Signed-off-by:
-
YueHaibing authored
A null check before a kfree is redundant, so remove it. This is detected by coccinelle. Signed-off-by:
James Smart <james.smart@broadcom.com> Signed-off-by:
-
Paolo Bonzini authored
Adding the command and kicking the virtqueue so far was done one after another. Make the kick optional, so that we can take into account SCMD_LAST. We also need a commit_rqs callback to kick the device if blk-mq aborts the submission before the last request is reached. Suggested-by:
Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Reviewed-by:
Hannes Reinecke <hare@suse.com> Reviewed-by:
Ming Lei <ming.lei@redhat.com> Signed-off-by:
-
Paolo Bonzini authored
This allows a list of requests to be issued, with the LLD only writing the hardware doorbell when necessary, after the last request was prepared. This is more efficient if we have lists of requests to issue, particularly on virtualized hardware, where writing the doorbell is more expensive than on real hardware. The use case for this is plugged IO, where blk-mq flushes a batch of requests all at once. The API is the same as for blk-mq, just with blk-mq concepts tweaked to fit the SCSI subsystem API: the "last" flag in blk_mq_queue_data becomes a flag in scsi_cmnd, while the queue_num in the commit_rqs callback is extracted from the hctx and passed as a parameter. The only complication is that blk-mq uses different plugging heuristics depending on whether commit_rqs is present or not. So we have two different sets of blk_mq_ops and pick one depending on whether the scsi_host template uses commit_rqs or not. Signed-off-by:
Bart Van Assche <bvanassche@acm.org> Reviewed-by:
-
Avri Altman authored
Added 'WITH Linux-syscall-note' exception which is the officially assigned exception identifier for the kernel syscall exception. This exception makes it possible to include GPL headers into non GPL code without confusing license compliance tools. Fixes: a851b2bd (scsi: uapi: ufs: Make utp_upiu_req visible to user space) Signed-off-by:
Pedro Sousa <pedrom.sousa@synopsys.com> Signed-off-by:
-
Stanley Chu authored
Currently only "interrupt-based" errors have their own history, however there are some "non-interrupt-based" errors or events which need history to improve debugging or help know the health status of UFS devices. Example of fatal errors: - Link startup error - Suspend error - Resume error Example of abnormal events: - Task or request abort - Device reset (now equals to Logical Unit Reset) - Host reset This patch tries to track above errors and events by existed UFS error history mechanism. Signed-off-by:
-
Stanley Chu authored
Currently UFS error history will be reset and lost during host reset flow by ufschd_probe_hba(). Avoid resetting it so error history can be kept as complete as possible to improve debugging. In addition, fix a minor display error in ufshcd_print_err_hist(). [mkp: commit desc clarification] Signed-off-by:
-
Stanley Chu authored
Provide more information about fatal and auto-hibern8 errors to improve debugging by extending existing UFS error history framework. [mkp: typos] Signed-off-by:
-
Stanley Chu authored
Remove "uic" term in below error history functions and structures for more general usages, struct ufs_uic_err_reg_hist; void ufshcd_update_uic_reg_hist(struct ufs_uic_err_reg_hist *reg_hist, u32 reg); void ufshcd_print_uic_err_hist(struct ufs_hba *hba, struct ufs_uic)err_reg_hist *err_hist, char *err_name); Signed-off-by:
-
- 21 Jul, 2019 7 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linuxLinus Torvalds authored
Pull Devicetree fixes from Rob Herring: "Fix several warnings/errors in validation of binding schemas" * tag 'devicetree-fixes-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dt-bindings: pinctrl: stm32: Fix missing 'clocks' property in examples dt-bindings: iio: ad7124: Fix dtc warnings in example dt-bindings: iio: avia-hx711: Fix avdd-supply typo in example dt-bindings: pinctrl: aspeed: Fix AST2500 example errors dt-bindings: pinctrl: aspeed: Fix 'compatible' schema errors dt-bindings: riscv: Limit cpus schema to only check RiscV 'cpu' nodes dt-bindings: Ensure child nodes are of type 'object'
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull vfs documentation typo fix from Al Viro. * 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: typo fix: it's d_make_root, not d_make_inode...
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull cifs fixes from Steve French: "Two fixes for stable, one that had dependency on earlier patch in this merge window and can now go in, and a perf improvement in SMB3 open" * tag '5.3-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6: cifs: update internal module number cifs: flush before set-info if we have writeable handles smb3: optimize open to not send query file internal info cifs: copy_file_range needs to strip setuid bits and update timestamps CIFS: fix deadlock in cached root handling
-
Qian Cai authored
The commit b3aa14f0 ("iommu: remove the mapping_error dma_map_ops method") incorrectly changed the checking from dma_ops_alloc_iova() in map_sg() causes a crash under memory pressure as dma_ops_alloc_iova() never return DMA_MAPPING_ERROR on failure but 0, so the error handling is all wrong. kernel BUG at drivers/iommu/iova.c:801! Workqueue: kblockd blk_mq_run_work_fn RIP: 0010:iova_magazine_free_pfns+0x7d/0xc0 Call Trace: free_cpu_cached_iovas+0xbd/0x150 alloc_iova_fast+0x8c/0xba dma_ops_alloc_iova.isra.6+0x65/0xa0 map_sg+0x8c/0x2a0 scsi_dma_map+0xc6/0x160 pqi_aio_submit_io+0x1f6/0x440 [smartpqi] pqi_scsi_queue_command+0x90c/0xdd0 [smartpqi] scsi_queue_rq+0x79c/0x1200 blk_mq_dispatch_rq_list+0x4dc/0xb70 blk_mq_sched_dispatch_requests+0x249/0x310 __blk_mq_run_hw_queue+0x128/0x200 blk_mq_run_work_fn+0x27/0x30 process_one_work+0x522/0xa10 worker_thread+0x63/0x5b0 kthread+0x1d2/0x1f0 ret_from_fork+0x22/0x40 Fixes: b3aa14f0 ("iommu: remove the mapping_error dma_map_ops method") Signed-off-by:
Qian Cai <cai@lca.pw> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Mike Rapoport authored
The hexagon implementation pte_alloc_one(), pte_alloc_one_kernel(), pte_free_kernel() and pte_free() is identical to the generic except of lack of __GFP_ACCOUNT for the user PTEs allocation. Switch hexagon to use generic version of these functions. Signed-off-by:
Mike Rapoport <rppt@linux.ibm.com> Signed-off-by:
-
git://github.com/jonmason/ntbLinus Torvalds authored
Pull NTB updates from Jon Mason: "New feature to add support for NTB virtual MSI interrupts, the ability to test and use this feature in the NTB transport layer. Also, bug fixes for the AMD and Switchtec drivers, as well as some general patches" * tag 'ntb-5.3' of git://github.com/jonmason/ntb: (22 commits) NTB: Describe the ntb_msi_test client in the documentation. NTB: Add MSI interrupt support to ntb_transport NTB: Add ntb_msi_test support to ntb_test NTB: Introduce NTB MSI Test Client NTB: Introduce MSI library NTB: Rename ntb.c to support multiple source files in the module NTB: Introduce functions to calculate multi-port resource index NTB: Introduce helper functions to calculate logical port number PCI/switchtec: Add module parameter to request more interrupts PCI/MSI: Support allocating virtual MSI interrupts ntb_hw_switchtec: Fix setup MW with failure bug ntb_hw_switchtec: Skip unnecessary re-setup of shared memory window for crosslink case ntb_hw_switchtec: Remove redundant steps of switchtec_ntb_reinit_peer() function NTB: correct ntb_dev_ops and ntb_dev comment typos NTB: amd: Silence shift wrapping warning in amd_ntb_db_vector_mask() ntb_hw_switchtec: potential shift wrapping bug in switchtec_ntb_init_sndev() NTB: ntb_transport: Ensure qp->tx_mw_dma_addr is initaliazed NTB: ntb_hw_amd: set peer limit register NTB: ntb_perf: Clear stale values in doorbell and command SPAD register NTB: ntb_perf: Disable NTB link after clearing peer XLAT registers ...
-
