- 30 Sep, 2018 34 commits
-
-
Trond Myklebust authored
This no longer causes them to lose their place in the transmission queue. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
-
Trond Myklebust authored
Rather than forcing each and every RPC task to grab the socket write lock in order to send itself, we allow whichever task is holding the write lock to attempt to drain the entire transmit queue. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
-
Trond Myklebust authored
Avoid memory starvation by giving RPCs that are tagged with the RPC_TASK_SWAPPER flag the highest priority. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
-
Trond Myklebust authored
Both RDMA and UDP transports require the request to get a "congestion control" credit before they can be transmitted. Right now, this is done when the request locks the socket. We'd like it to happen when a request attempts to be transmitted for the first time. In order to support retransmission of requests that already hold such credits, we also want to ensure that they get queued first, so that we don't deadlock with requests that have yet to obtain a credit. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
-
Trond Myklebust authored
One of the intentions with the priority queues was to ensure that no single process can hog the transport. The field task->tk_owner therefore identifies the RPC call's origin, and is intended to allow the RPC layer to organise queues for fairness. This commit therefore modifies the transmit queue to group requests by task->tk_owner, and ensures that we round robin among those groups. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
-
Trond Myklebust authored
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
-
Trond Myklebust authored
Remove the checks for whether or not we need to transmit, and whether or not a reply has been received. Those are already handled in call_transmit() itself. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
-
Trond Myklebust authored
If the request is still on the queue, this will be incorrect behaviour. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
-
Trond Myklebust authored
When we shift to using the transmit queue, then the task that holds the write lock will not necessarily be the same as the one being transmitted. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
-
Trond Myklebust authored
Fix up the back channel code to recognise that it has already been transmitted, so does not need to be called again. Also ensure that we set req->rq_task. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
-
Trond Myklebust authored
Move the call encoding so that it occurs before the transport connection etc. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
-
Trond Myklebust authored
Add the queue that will enforce the ordering of RPC task transmission. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
-
Trond Myklebust authored
When storing a struct rpc_rqst on the slot allocation list, we currently use the same field 'rq_list' as we use to store the request on the receive queue. Since the structure is never on both lists at the same time, this is OK. However, for clarity, let's make that a union with different names for the different lists so that we can more easily distinguish between the two states. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
-
Trond Myklebust authored
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
-
Trond Myklebust authored
Allow the caller in clnt.c to call into the code to wait for a reply after calling xprt_transmit(). Again, the reason is that the backchannel code does not need this functionality. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
-
Trond Myklebust authored
Separate out the action of adding a request to the reply queue so that the backchannel code can simply skip calling it altogether. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
-
Trond Myklebust authored
We will use the same lock to protect both the transmit and receive queues. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
-
Trond Myklebust authored
Rather than waking up the entire queue of RPC messages a second time, just wake up the task that was put to sleep. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
-
Trond Myklebust authored
When asked to wake up an RPC task, it makes sense to test whether or not the task is still queued. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
-
Trond Myklebust authored
Add a helper that will wake up a task that is sleeping on a specific queue, and will set the value of task->tk_status. This is mainly intended for use by the transport layer to notify the task of an error condition. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
-
Trond Myklebust authored
We are going to need to pin for both send and receive. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
-
Trond Myklebust authored
If the previous message was only partially transmitted, we need to close the socket in order to avoid corruption of the message stream. To do so, we currently hijack the unlocking of the socket in order to schedule the close. Now that we track the message offset in the socket state, we can move that kind of checking out of the socket lock code, which is needed to allow messages to remain queued after dropping the socket lock. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
-
Trond Myklebust authored
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
-
Trond Myklebust authored
Rather than resetting state variables in socket state_change() callback, do it in the sunrpc TCP connect function itself. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
-
Trond Myklebust authored
Since we will want to introduce similar TCP state variables for the transmission of requests, let's rename the existing ones to label that they are for the receive side. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
-
Trond Myklebust authored
Currently, we grab the socket bit lock before we allow the message to be XDR encoded. That significantly slows down the transmission rate, since we serialise on a potentially blocking operation. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
-
Trond Myklebust authored
Add states to indicate that the message send and receive are not yet complete. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
-
Trond Myklebust authored
If a message has been encoded using RPCSEC_GSS, the server is maintaining a window of sequence numbers that it considers valid. The client should normally be tracking that window, and needs to verify that the sequence number used by the message being transmitted still lies inside the window of validity. So far, we've been able to assume this condition would be realised automatically, since the client has been encoding the message only after taking the socket lock. Once we change that condition, we will need the explicit check. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
-
Trond Myklebust authored
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
-
Trond Myklebust authored
Move the initialisation back into xprt.c. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
-
Greg Kroah-Hartman authored
-
https://github.com/ojeda/linuxGreg Kroah-Hartman authored
Miguel writes: "A trivial fix for auxdisplay - MAINTAINERS reference fix for moved file Reported by Joe Perches" * tag 'auxdisplay-for-greg-v4.19-rc6' of https://github.com/ojeda/linux: MAINTAINERS: fix reference to moved drivers/{misc => auxdisplay}/panel.c
-
Greg Kroah-Hartman authored
Merge tag 'libnvdimm-fixes2-4.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Dan writes: "filesystem-dax for 4.19-rc6 Fix a deadlock in the new for 4.19 dax_lock_mapping_entry() routine." * tag 'libnvdimm-fixes2-4.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: dax: Fix deadlock in dax_lock_mapping_entry()
-
Miguel Ojeda authored
Commit 51c1e9b5 ("auxdisplay: Move panel.c to drivers/auxdisplay folder") moved the file, but the MAINTAINERS reference was not updated. Link: https://lore.kernel.org/lkml/20180928220131.31075-1-joe@perches.com/Reported-by: Joe Perches <joe@perches.com> Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
-
- 29 Sep, 2018 6 commits
-
-
git://git.kernel.dk/linux-blockGreg Kroah-Hartman authored
Jens writes: "Block fixes for 4.19-rc6 A set of fixes that should go into this release. This pull request contains: - A fix (hopefully) for the persistent grants for xen-blkfront. A previous fix from this series wasn't complete, hence reverted, and this one should hopefully be it. (Boris Ostrovsky) - Fix for an elevator drain warning with SMR devices, which is triggered when you switch schedulers (Damien) - bcache deadlock fix (Guoju Fang) - Fix for the block unplug tracepoint, which has had the timer/explicit flag reverted since 4.11 (Ilya) - Fix a regression in this series where the blk-mq timeout hook is invoked with the RCU read lock held, hence preventing it from blocking (Keith) - NVMe pull from Christoph, with a single multipath fix (Susobhan Dey)" * tag 'for-linus-20180929' of git://git.kernel.dk/linux-block: xen/blkfront: correct purging of persistent grants Revert "xen/blkfront: When purging persistent grants, keep them in the buffer" blk-mq: I/O and timer unplugs are inverted in blktrace bcache: add separate workqueue for journal_write to avoid deadlock xen/blkfront: When purging persistent grants, keep them in the buffer block: fix deadline elevator drain for zoned block devices blk-mq: Allow blocking queue tag iter callbacks nvme: properly propagate errors in nvme_mpath_init
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipGreg Kroah-Hartman authored
Thomas writes: "A single fix for the AMD memory encryption boot code so it does not read random garbage instead of the cached encryption bit when a kexec kernel is allocated above the 32bit address limit." * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/boot: Fix kexec booting failure in the SEV bit detection code
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipGreg Kroah-Hartman authored
Thomas writes: "Three small fixes for clocksource drivers: - Proper error handling in the Atmel PIT driver - Add CLOCK_SOURCE_SUSPEND_NONSTOP for TI SoCs so suspend works again - Fix the next event function for Facebook Backpack-CMM BMC chips so usleep(100) doesnt sleep several milliseconds" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource/drivers/timer-atmel-pit: Properly handle error cases clocksource/drivers/fttmr010: Fix set_next_event handler clocksource/drivers/ti-32k: Add CLOCK_SOURCE_SUSPEND_NONSTOP flag for non-am43 SoCs
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipGreg Kroah-Hartman authored
Thomas writes: "A single fix for a missing sanity check when a pinned event is tried to be read on the wrong CPU due to a legit event scheduling failure." * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/core: Add sanity check to deal with pinned event failure
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmGreg Kroah-Hartman authored
Rafael writes: "Power management fix for 4.19-rc6 Fix incorrect __init and __exit annotations in the Qualcomm Kryo cpufreq driver (Nathan Chancellor)." * tag 'pm-4.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: qcom-kryo: Fix section annotations
-
Nathan Chancellor authored
There is currently a warning when building the Kryo cpufreq driver into the kernel image: WARNING: vmlinux.o(.text+0x8aa424): Section mismatch in reference from the function qcom_cpufreq_kryo_probe() to the function .init.text:qcom_cpufreq_kryo_get_msm_id() The function qcom_cpufreq_kryo_probe() references the function __init qcom_cpufreq_kryo_get_msm_id(). This is often because qcom_cpufreq_kryo_probe lacks a __init annotation or the annotation of qcom_cpufreq_kryo_get_msm_id is wrong. Remove the '__init' annotation from qcom_cpufreq_kryo_get_msm_id so that there is no more mismatch warning. Additionally, Nick noticed that the remove function was marked as '__init' when it should really be marked as '__exit'. Fixes: 46e2856b (cpufreq: Add Kryo CPU scaling driver) Fixes: 5ad7346b (cpufreq: kryo: Add module remove and exit) Reported-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Cc: 4.18+ <stable@vger.kernel.org> # 4.18+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-