- 15 May, 2020 1 commit
-
-
Bodo Stroesser authored
Testing with Loopback I found that, after a Loopback LUN has executed a TMR, I can no longer unlink the LUN. The rm command hangs in transport_clear_lun_ref() at wait_for_completion(&lun->lun_shutdown_comp) The reason is, that transport_lun_remove_cmd() is not called at the end of target_tmr_work(). It seems, that in other fabrics this call happens implicitly when the fabric drivers call transport_generic_free_cmd() during their ->queue_tm_rsp(). Unfortunately Loopback seems to not comply to the common way of calling transport_generic_free_cmd() from ->queue_*(). Instead it calls transport_generic_free_cmd() from its ->check_stop_free() only. But the ->check_stop_free() is called by transport_cmd_check_stop_to_fabric() after it has reset the se_cmd->se_lun pointer. Therefore the following transport_generic_free_cmd() skips the transport_lun_remove_cmd(). So this patch re-adds the transport_lun_remove_cmd() at the end of target_tmr_work(), which was removed during commit 2c9fa49e ("scsi: target/core: Make ABORT and LUN RESET handling synchronous"). For fabrics using transport_generic_free_cmd() in the usual way the double call to transport_lun_remove_cmd() doesn't harm, as transport_lun_remove_cmd() checks for this situation and does not release lun_ref twice. Link: https://lore.kernel.org/r/20200513153443.3554-1-bstroesser@ts.fujitsu.com Fixes: 2c9fa49e ("scsi: target/core: Make ABORT and LUN RESET handling synchronous") Cc: stable@vger.kernel.org Tested-by:
Bryant G. Ly <bryangly@gmail.com> Reviewed-by:
Bart van Assche <bvanassche@acm.org> Signed-off-by:
Bodo Stroesser <bstroesser@ts.fujitsu.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com>
-
- 11 May, 2020 2 commits
-
-
Can Guo authored
During system resume, scsi_resume_device() decreases a request queue's pm_only counter if the scsi device was quiesced before. But after that, if the scsi device's RPM status is RPM_SUSPENDED, the pm_only counter is still held (non-zero). Current SCSI resume hook only sets the RPM status of the scsi_device and its request queue to RPM_ACTIVE, but leaves the pm_only counter unchanged. This may make the request queue's pm_only counter remain non-zero after resume hook returns, hence those who are waiting on the mq_freeze_wq would never be woken up. Fix this by calling blk_post_runtime_resume() if a sdev's RPM status was RPM_SUSPENDED. (struct request_queue)0xFFFFFF815B69E938 pm_only = (counter = 2), rpm_status = 0, dev = 0xFFFFFF815B0511A0, ((struct device)0xFFFFFF815B0511A0)).power is_suspended = FALSE, runtime_status = RPM_ACTIVE, (struct scsi_device)0xffffff815b051000 request_queue = 0xFFFFFF815B69E938, sdev_state = SDEV_RUNNING, quiesced_by = 0x0, B::v.f_/task_0xFFFFFF810C246940 -000|__switch_to(prev = 0xFFFFFF810C246940, next = 0xFFFFFF80A49357C0) -001|context_switch(inline) -001|__schedule(?) -002|schedule() -003|blk_queue_enter(q = 0xFFFFFF815B69E938, flags = 0) -004|generic_make_request(?) -005|submit_bio(bio = 0xFFFFFF80A8195B80) Link: https://lore.kernel.org/r/1588740936-28846-1-git-send-email-cang@codeaurora.orgReviewed-by:
Can Guo <cang@codeaurora.org> Signed-off-by:
-
Ewan D. Milne authored
Calling ql_log() inside qla2x00_port_speed_show() is causing messages to be output to the console for no particularly good reason. The sysfs read routine should just return the information to userspace. The only reason to log a message is when the port speed actually changes, and this already occurs elsewhere. Link: https://lore.kernel.org/r/20200504175416.15417-1-emilne@redhat.com Fixes: 4910b524 ("scsi: qla2xxx: Add support for setting port speed") Cc: <stable@vger.kernel.org> # v5.1+ Reviewed-by:
Lee Duncan <lduncan@suse.com> Reviewed-by:
Laurence Oberman <loberman@redhat.com> Reviewed-by:
Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by:
Ewan D. Milne <emilne@redhat.com> Signed-off-by:
-
- 29 Apr, 2020 1 commit
-
-
Tyrel Datwyler authored
While removing an ibmvscsi client adapter a WARN_ON like the following is seen in the kernel log: drmgr: drmgr: -r -c slot -s U9080.M9S.783AEC8-V11-C11 -w 5 -d 1 WARNING: CPU: 9 PID: 24062 at ../kernel/dma/mapping.c:311 dma_free_attrs+0x78/0x110 Supported: No, Unreleased kernel CPU: 9 PID: 24062 Comm: drmgr Kdump: loaded Tainted: G X 5.3.18-12-default NIP: c0000000001fa758 LR: c0000000001fa744 CTR: c0000000001fa6e0 REGS: c0000002173375d0 TRAP: 0700 Tainted: G X (5.3.18-12-default) MSR: 8000000000029033 <SF,EE,ME,IR,DR,RI,LE> CR: 28088282 XER: 20000000 CFAR: c0000000001fbf0c IRQMASK: 1 GPR00: c0000000001fa744 c000000217337860 c00000000161ab00 0000000000000000 GPR04: 0000000000000000 c000011e12250000 0000000018010000 0000000000000000 GPR08: 0000000000000000 0000000000000001 0000000000000001 c0080000190f4fa8 GPR12: c0000000001fa6e0 c000000007fc2a00 0000000000000000 0000000000000000 GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR20: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR24: 000000011420e310 0000000000000000 0000000000000000 0000000018010000 GPR28: c00000000159de50 c000011e12250000 0000000000006600 c000011e5c994848 NIP [c0000000001fa758] dma_free_attrs+0x78/0x110 LR [c0000000001fa744] dma_free_attrs+0x64/0x110 Call Trace: [c000000217337860] [000000011420e310] 0x11420e310 (unreliable) [c0000002173378b0] [c0080000190f0280] release_event_pool+0xd8/0x120 [ibmvscsi] [c000000217337930] [c0080000190f3f74] ibmvscsi_remove+0x6c/0x160 [ibmvscsi] [c000000217337960] [c0000000000f3cac] vio_bus_remove+0x5c/0x100 [c0000002173379a0] [c00000000087a0a4] device_release_driver_internal+0x154/0x280 [c0000002173379e0] [c0000000008777cc] bus_remove_device+0x11c/0x220 [c000000217337a60] [c000000000870fc4] device_del+0x1c4/0x470 [c000000217337b10] [c0000000008712a0] device_unregister+0x30/0xa0 [c000000217337b80] [c0000000000f39ec] vio_unregister_device+0x2c/0x60 [c000000217337bb0] [c00800001a1d0964] dlpar_remove_slot+0x14c/0x250 [rpadlpar_io] [c000000217337c50] [c00800001a1d0bcc] remove_slot_store+0xa4/0x110 [rpadlpar_io] [c000000217337cd0] [c000000000c091a0] kobj_attr_store+0x30/0x50 [c000000217337cf0] [c00000000057c934] sysfs_kf_write+0x64/0x90 [c000000217337d10] [c00000000057be10] kernfs_fop_write+0x1b0/0x290 [c000000217337d60] [c000000000488c4c] __vfs_write+0x3c/0x70 [c000000217337d80] [c00000000048c648] vfs_write+0xd8/0x260 [c000000217337dd0] [c00000000048ca8c] ksys_write+0xdc/0x130 [c000000217337e20] [c00000000000b488] system_call+0x5c/0x70 Instruction dump: 7c840074 f8010010 f821ffb1 20840040 eb830218 7c8407b4 48002019 60000000 2fa30000 409e003c 892d0988 792907e0 <0b090000> 2fbd0000 419e0028 2fbc0000 ---[ end trace 5955b3c0cc079942 ]--- rpadlpar_io: slot U9080.M9S.783AEC8-V11-C11 removed This is tripped as a result of irqs being disabled during the call to dma_free_coherent() by release_event_pool(). At this point in the code path we have quiesced the adapter and it is overly paranoid to be holding the host lock. [mkp: fixed build warning reported by sfr] Link: https://lore.kernel.org/r/1588027793-17952-1-git-send-email-tyreld@linux.ibm.comSigned-off-by:
Tyrel Datwyler <tyreld@linux.ibm.com> Signed-off-by:
-
- 28 Apr, 2020 1 commit
-
-
Brian King authored
Commit ed830385 ("scsi: ibmvfc: Avoid loss of all paths during SVC node reboot") introduced a regression where when the client resets or re-enables its CRQ with the hypervisor there is a chance that if the server side doesn't issue its INIT handshake quick enough the client can issue an Implicit Logout prior to doing an NPIV Login. The server treats this scenario as a protocol violation and closes the CRQ on its end forcing the client through a reset that gets the client host state and next host action out of agreement leading to a BUG assert. ibmvfc 30000003: Partner initialization complete ibmvfc 30000002: Partner initialization complete ibmvfc 30000002: Host partner adapter deregistered or failed (rc=2) ibmvfc 30000002: Partner initialized ------------[ cut here ]------------ kernel BUG at ../drivers/scsi/ibmvscsi/ibmvfc.c:4489! Oops: Exception in kernel mode, sig: 5 [#1] LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries Supported: No, Unreleased kernel CPU: 16 PID: 1290 Comm: ibmvfc_0 Tainted: G OE X 5.3.18-12-default NIP: c00800000d84a2b4 LR: c00800000d84a040 CTR: c00800000d84a2a0 REGS: c00000000cb57a00 TRAP: 0700 Tainted: G OE X (5.3.18-12-default) MSR: 800000000282b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 24000848 XER: 00000001 CFAR: c00800000d84a070 IRQMASK: 1 GPR00: c00800000d84a040 c00000000cb57c90 c00800000d858e00 0000000000000000 GPR04: 0000000000000000 0000000000000000 0000000000000000 00000000000000a0 GPR08: c00800000d84a074 0000000000000001 0000000000000014 c00800000d84d7d0 GPR12: 0000000000000000 c00000001ea28200 c00000000016cd98 0000000000000000 GPR16: c00800000d84b7b8 0000000000000000 0000000000000000 c00000542c706d68 GPR20: 0000000000000005 c00000542c706d88 5deadbeef0000100 5deadbeef0000122 GPR24: 000000000000000c 000000000000000b c00800000d852180 0000000000000001 GPR28: 0000000000000000 c00000542c706da0 c00000542c706860 c00000542c706828 NIP [c00800000d84a2b4] ibmvfc_work+0x3ac/0xc90 [ibmvfc] LR [c00800000d84a040] ibmvfc_work+0x138/0xc90 [ibmvfc] This scenario can be prevented by rejecting any attempt to send an Implicit Logout if the client adapter is not logged in yet. Link: https://lore.kernel.org/r/20200427214824.6890-1-tyreld@linux.ibm.com Fixes: ed830385 ("scsi: ibmvfc: Avoid loss of all paths during SVC node reboot") Signed-off-by:
Brian King <brking@linux.vnet.ibm.com> Signed-off-by:
-
- 24 Apr, 2020 2 commits
-
-
Quinn Tran authored
Delete all sessions before unregistering local nvme port. This allows nvme layer to decrement all active rport count down to zero. Once the count is down to zero, nvme would call qla to continue with the npiv port deletion. PID: 27448 TASK: ffff9e34b777c1c0 CPU: 0 COMMAND: "qaucli" 0 [ffff9e25e84abbd8] __schedule at ffffffff977858ca 1 [ffff9e25e84abc68] schedule at ffffffff97785d79 2 [ffff9e25e84abc78] schedule_timeout at ffffffff97783881 3 [ffff9e25e84abd28] wait_for_completion at ffffffff9778612d 4 [ffff9e25e84abd88] qla_nvme_delete at ffffffffc0e3024e [qla2xxx] 5 [ffff9e25e84abda8] qla24xx_vport_delete at ffffffffc0e024b9 [qla2xxx] 6 [ffff9e25e84abdf0] fc_vport_terminate at ffffffffc011c247 [scsi_transport_fc] 7 [ffff9e25e84abe28] store_fc_host_vport_delete at ffffffffc011cd94 [scsi_transport_fc] 8 [ffff9e25e84abe70] dev_attr_store at ffffffff974b376b 9 [ffff9e25e84abe80] sysfs_kf_write at ffffffff972d9a92 10 [ffff9e25e84abe90] kernfs_fop_write at ffffffff972d907b 11 [ffff9e25e84abec8] vfs_write at ffffffff9724c790 12 [ffff9e25e84abf08] sys_write at ffffffff9724d55f 13 [ffff9e25e84abf50] system_call_fastpath at ffffffff97792ed2 RIP: 00007fc0bd81a6fd RSP: 00007ffff78d9648 RFLAGS: 00010202 RAX: 0000000000000001 RBX: 0000000000000022 RCX: 00007ffff78d96e0 RDX: 0000000000000022 RSI: 00007ffff78d94e0 RDI: 0000000000000008 RBP: 00007ffff78d9440 R8: 0000000000000000 R9: 00007fc0bd48b2cd R10: 0000000000000017 R11: 0000000000000293 R12: 0000000000000000 R13: 00005624e4dac840 R14: 00005624e4da9a10 R15: 0000000000000000 ORIG_RAX: 0000000000000001 CS: 0033 SS: 002b Link: https://lore.kernel.org/r/20200331104015.24868-4-njavali@marvell.comReviewed-by:Quinn Tran <qutran@marvell.com> Signed-off-by:
Nilesh Javali <njavali@marvell.com> Signed-off-by:
-
Arun Easi authored
In NPIV environment, a NPIV host may use a queue pair created by base host or other NPIVs, so the check for a queue pair created by this NPIV is not correct, and can cause an abort to fail, which in turn means the NVME command not returned. This leads to hang in nvme_fc layer in nvme_fc_delete_association() which waits for all I/Os to be returned, which is seen as hang in the application. Link: https://lore.kernel.org/r/20200331104015.24868-3-njavali@marvell.comReviewed-by:
Arun Easi <aeasi@marvell.com> Signed-off-by:
-
- 22 Apr, 2020 4 commits
-
-
David Disseldorp authored
SBC4 specifies that WRITE SAME requests with the UNMAP bit set to zero "shall perform the specified write operation to each LBA specified by the command". Commit 2237498f ("target/iblock: Convert WRITE_SAME to blkdev_issue_zeroout") modified the iblock backend to call blkdev_issue_zeroout() when handling WRITE SAME requests with UNMAP=0 and a zero data segment. The iblock blkdev_issue_zeroout() call incorrectly provides a flags parameter of 0 (bool false), instead of BLKDEV_ZERO_NOUNMAP. The bool false parameter reflects the blkdev_issue_zeroout() API prior to commit ee472d83 ("block: add a flags argument to (__)blkdev_issue_zeroout") which was merged shortly before 2237498f. Link: https://lore.kernel.org/r/20200419163109.11689-1-ddiss@suse.de Fixes: 2237498f ("target/iblock: Convert WRITE_SAME to blkdev_issue_zeroout") Reviewed-by:
David Disseldorp <ddiss@suse.de> Signed-off-by:
-
Martin Wilck authored
qlt_free_session_done() tries to post async PRLO / LOGO, and waits for the completion of these async commands. If UNLOADING is set, this is doomed to timeout, because the async logout command will never complete. The only way to avoid waiting pointlessly is to fail posting these commands in the first place if the driver is in UNLOADING state. In general, posting any command should be avoided when the driver is UNLOADING. With this patch, "rmmod qla2xxx" completes without noticeable delay. Link: https://lore.kernel.org/r/20200421204621.19228-3-mwilck@suse.com Fixes: 45235022 ("scsi: qla2xxx: Fix driver unload by shutting down chip") Acked-by:
Martin Wilck <mwilck@suse.com> Signed-off-by:
-
Martin Wilck authored
The purpose of the UNLOADING flag is to avoid port login procedures to continue when a controller is in the process of shutting down. It makes sense to set this flag before starting session teardown. Furthermore, use atomic test_and_set_bit() to avoid the shutdown being run multiple times in parallel. In qla2x00_disable_board_on_pci_error(), the test for UNLOADING is postponed until after the check for an already disabled PCI board. Link: https://lore.kernel.org/r/20200421204621.19228-2-mwilck@suse.com Fixes: 45235022 ("scsi: qla2xxx: Fix driver unload by shutting down chip") Reviewed-by:
Daniel Wagner <dwagner@suse.de> Reviewed-by:
Roman Bolshakov <r.bolshakov@yadro.com> Reviewed-by:
-
Dexuan Cui authored
The APIs scsi_host_block()/scsi_host_unblock() were recently added by commit 2bb95584 ("scsi: core: add scsi_host_(block,unblock) helper function") and so far the APIs are only used by: commit 3d3ca53b ("scsi: aacraid: use scsi_host_(block,unblock) to block I/O"). However, from reading the code, I think the APIs don't really work for aacraid, because, in the resume path of hibernation, when aac_suspend() -> scsi_host_block() is called, scsi_device_quiesce() has set the state to SDEV_QUIESCE, so aac_suspend() -> scsi_host_block() returns -EINVAL. Fix the issue by allowing the state change. Link: https://lore.kernel.org/r/1587170445-50013-1-git-send-email-decui@microsoft.com Fixes: 2bb95584 ("scsi: core: add scsi_host_(block,unblock) helper function") Reviewed-by:
Ming Lei <ming.lei@redhat.com> Signed-off-by:
Dexuan Cui <decui@microsoft.com> Signed-off-by:
-
- 15 Apr, 2020 2 commits
-
-
Diego Elio Pettenò authored
Link: https://lore.kernel.org/r/20200413170501.13381-1-flameeyes@flameeyes.comSigned-off-by:
Diego Elio Pettenò <flameeyes@flameeyes.com> Signed-off-by:
-
Wu Bo authored
If the __copy_from_user function failed we need to call sg_remove_request in sg_write. Link: https://lore.kernel.org/r/610618d9-e983-fd56-ed0f-639428343af7@huawei.comAcked-by:
Douglas Gilbert <dgilbert@interlog.com> Signed-off-by:
Wu Bo <wubo40@huawei.com> Signed-off-by:
-
- 14 Apr, 2020 1 commit
-
-
Li Bin authored
If the dxfer_len is greater than 256M then the request is invalid and we need to call sg_remove_request in sg_common_write. Link: https://lore.kernel.org/r/1586777361-17339-1-git-send-email-huawei.libin@huawei.com Fixes: f930c704 ("scsi: sg: only check for dxfer_len greater than 256M") Acked-by:
Li Bin <huawei.libin@huawei.com> Signed-off-by:
-
- 13 Apr, 2020 6 commits
-
-
Bodo Stroesser authored
In case command ring buffer becomes inconsistent, tcmu sets device flag TCMU_DEV_BIT_BROKEN. If the bit is set, tcmu rejects new commands from LIO core with TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE, and no longer processes completions from the ring. The reset_ring attribute can be used to completely clean up the command ring, so after reset_ring the ring no longer is inconsistent. Therefore reset_ring also should reset bit TCMU_DEV_BIT_BROKEN to allow normal processing. Link: https://lore.kernel.org/r/20200409101026.17872-1-bstroesser@ts.fujitsu.comAcked-by:
Mike Christie <mchristi@redhat.com> Signed-off-by:
-
Bodo Stroesser authored
Creation of the response to READ FULL STATUS fails for FC based reservations. Reason is the too high loop limit (< 24) in fc_get_pr_transport_id(). The string representation of FC WWPN is 23 chars long only ("11:22:33:44:55:66:77:88"). So when i is 23, the loop body is executed a last time for the ending '\0' of the string and thus hex2bin() reports an error. Link: https://lore.kernel.org/r/20200408132610.14623-3-bstroesser@ts.fujitsu.comSigned-off-by: -
Bodo Stroesser authored
This patch fixes a minor flaw that could be triggered by a PR OUT RESERVE on iSCSI, if TRANSPORT IDs with and without ISID are used in the same command. In case an ISCSI Transport ID has no ISID, port_nexus_ptr was not used to write NULL, so value from previous call might persist. I don't know if that ever could happen, but with the change the code is cleaner, I think. Link: https://lore.kernel.org/r/20200408132610.14623-2-bstroesser@ts.fujitsu.comSigned-off-by:
-
Nilesh Javali authored
Add njavali@marvell.com as new maintainer. Also add Marvell Upstream email alias to the maintainers list. Link: https://lore.kernel.org/r/20200403084018.30766-3-njavali@marvell.comReviewed-by:
-
Nilesh Javali authored
drivers/scsi/qla2xxx/qla_dbg.c:2542:7: warning: The scope of the variable 'pbuf' can be reduced. [variableScope] drivers/scsi/qla2xxx/qla_init.c:3615:6: warning: Variable 'rc' is assigned a value that is never used. [unreadVariable] drivers/scsi/qla2xxx/qla_isr.c:81:11-29: WARNING: dma_alloc_coherent use in rsp_els already zeroes out memory, so memset is not needed drivers/scsi/qla2xxx/qla_mbx.c:4889:15-33: WARNING: dma_alloc_coherent use in els_cmd_map already zeroes out memory, so memset is not needed [mkp: added newline after variable declaration] Link: https://lore.kernel.org/r/20200403084018.30766-2-njavali@marvell.comReported-by:
kbuild test robot <lkp@intel.com> Signed-off-by:
-
YueHaibing authored
If SATA_HOST is n, build fails: drivers/scsi/hisi_sas/hisi_sas_main.o: In function `hisi_sas_fill_ata_reset_cmd': hisi_sas_main.c:(.text+0x2500): undefined reference to `ata_tf_to_fis' Select SATA_HOST to fix this. Link: https://lore.kernel.org/r/20200402085812.32948-1-yuehaibing@huawei.com Fixes: bd322af1 ("ata: make SATA_PMP option selectable only if any SATA host driver is enabled") Reported-by:
Hulk Robot <hulkci@huawei.com> Reviewed-by:
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Acked-by:
John Garry <john.garry@huawei.com> Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
-
- 12 Apr, 2020 10 commits
-
-
Linus Torvalds authored
-
Linus Torvalds authored
This sorts the actual field names too, potentially causing even more chaos and confusion at merge time if you have edited the MAINTAINERS file. But the end result is a more consistent layout, and hopefully it's a one-time pain minimized by doing this just before the -rc1 release. This was entirely scripted: ./scripts/parse-maintainers.pl --input=MAINTAINERS --output=MAINTAINERS --order Requested-by:
Joe Perches <joe@perches.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
They are all supposed to be sorted, but people who add new entries don't always know the alphabet. Plus sometimes the entry names get edited, and people don't then re-order the entry. Let's see how painful this will be for merging purposes (the MAINTAINERS file is often edited in various different trees), but Joe claims there's relatively few patches in -next that touch this, and doing it just before -rc1 is likely the best time. Fingers crossed. This was scripted with /scripts/parse-maintainers.pl --input=MAINTAINERS --output=MAINTAINERS but then I also ended up manually upper-casing a few entry names that stood out when looking at the end result. Requested-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Thomas Gleixner: "A set of three patches to fix the fallout of the newly added split lock detection feature. It addressed the case where a KVM guest triggers a split lock #AC and KVM reinjects it into the guest which is not prepared to handle it. Add proper sanity checks which prevent the unconditional injection into the guest and handles the #AC on the host side in the same way as user space detections are handled. Depending on the detection mode it either warns and disables detection for the task or kills the task if the mode is set to fatal" * tag 'x86-urgent-2020-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: KVM: VMX: Extend VMXs #AC interceptor to handle split lock #AC in guest KVM: x86: Emulate split-lock access as a write in emulator x86/split_lock: Provide handle_guest_split_lock()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull time(keeping) updates from Thomas Gleixner: - Fix the time_for_children symlink in /proc/$PID/ so it properly reflects that it part of the 'time' namespace - Add the missing userns limit for the allowed number of time namespaces, which was half defined but the actual array member was not added. This went unnoticed as the array has an exessive empty member at the end but introduced a user visible regression as the output was corrupted. - Prevent further silent ucount corruption by adding a BUILD_BUG_ON() to catch half updated data. * tag 'timers-urgent-2020-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: ucount: Make sure ucounts in /proc/sys/user don't regress again time/namespace: Add max_time_namespaces ucount time/namespace: Fix time_for_children symlink
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fixes/updates from Thomas Gleixner: - Deduplicate the average computations in the scheduler core and the fair class code. - Fix a raise between runtime distribution and assignement which can cause exceeding the quota by up to 70%. - Prevent negative results in the imbalanace calculation - Remove a stale warning in the workqueue code which can be triggered since the call site was moved out of preempt disabled code. It's a false positive. - Deduplicate the print macros for procfs - Add the ucmap values to the SCHED_DEBUG procfs output for completness * tag 'sched-urgent-2020-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/debug: Add task uclamp values to SCHED_DEBUG procfs sched/debug: Factor out printing formats into common macros sched/debug: Remove redundant macro define sched/core: Remove unused rq::last_load_update_tick workqueue: Remove the warning in wq_worker_sleeping() sched/fair: Fix negative imbalance in imbalance calculation sched/fair: Fix race between runtime distribution and assignment sched/fair: Align rq->avg_idle and rq->avg_scan_cost
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Thomas Gleixner: "Three fixes/updates for perf: - Fix the perf event cgroup tracking which tries to track the cgroup even for disabled events. - Add Ice Lake server support for uncore events - Disable pagefaults when retrieving the physical address in the sampling code" * tag 'perf-urgent-2020-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/core: Disable page faults when getting phys address perf/x86/intel/uncore: Add Ice Lake server uncore support perf/cgroup: Correct indirection in perf_less_group_idx() perf/core: Fix event cgroup tracking -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull locking fixes from Thomas Gleixner: "Three small fixes/updates for the locking core code: - Plug a task struct reference leak in the percpu rswem implementation. - Document the refcount interaction with PID_MAX_LIMIT - Improve the 'invalid wait context' data dump in lockdep so it contains all information which is required to decode the problem" * tag 'locking-urgent-2020-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking/lockdep: Improve 'invalid wait context' splat locking/refcount: Document interaction with PID_MAX_LIMIT locking/percpu-rwsem: Fix a task_struct refcount -
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull cifs fixes from Steve French: "Ten cifs/smb fixes: - five RDMA (smbdirect) related fixes - add experimental support for swap over SMB3 mounts - also a fix which improves performance of signed connections" * tag '5.7-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6: smb3: enable swap on SMB3 mounts smb3: change noisy error message to FYI smb3: smbdirect support can be configured by default cifs: smbd: Do not schedule work to send immediate packet on every receive cifs: smbd: Properly process errors on ib_post_send cifs: Allocate crypto structures on the fly for calculating signatures of incoming packets cifs: smbd: Update receive credits before sending and deal with credits roll back on failure before sending cifs: smbd: Check send queue size before posting a send cifs: smbd: Merge code to track pending packets cifs: ignore cached share root handle closing errors
-
git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds authored
Pull NFS client bugfix from Trond Myklebust: "Fix an RCU read lock leakage in pnfs_alloc_ds_commits_list()" * tag 'nfs-for-5.7-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: pNFS: Fix RCU lock leakage
-
- 11 Apr, 2020 10 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2Linus Torvalds authored
Pull nios2 updates from Ley Foon Tan: - Remove nios2-dev@lists.rocketboards.org from MAINTAINERS - remove 'resetvalue' property - rename 'altr,gpio-bank-width' -> 'altr,ngpio' - enable the common clk subsystem on Nios2 * tag 'nios2-v5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2: MAINTAINERS: Remove nios2-dev@lists.rocketboards.org arch: nios2: remove 'resetvalue' property arch: nios2: rename 'altr,gpio-bank-width' -> 'altr,ngpio' arch: nios2: Enable the common clk subsystem on Nios2
-
git://git.infradead.org/users/hch/dma-mappingLinus Torvalds authored
Pull dma-mapping fixes from Christoph Hellwig: - fix an integer truncation in dma_direct_get_required_mask (Kishon Vijay Abraham) - fix the display of dma mapping types (Grygorii Strashko) * tag 'dma-mapping-5.7-1' of git://git.infradead.org/users/hch/dma-mapping: dma-debug: fix displaying of dma allocation type dma-direct: fix data truncation in dma_direct_get_required_mask()
-
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuildLinus Torvalds authored
Pull more Kbuild updates from Masahiro Yamada: - raise minimum supported binutils version to 2.23 - remove old CONFIG_AS_* macros that we know binutils >= 2.23 supports - move remaining CONFIG_AS_* tests to Kconfig from Makefile - enable -Wtautological-compare warnings to catch more issues - do not support GCC plugins for GCC <= 4.7 - fix various breakages of 'make xconfig' - include the linker version used for linking the kernel into LINUX_COMPILER, which is used for the banner, and also exposed to /proc/version - link lib-y objects to vmlinux forcibly when CONFIG_MODULES=y, which allows us to remove the lib-ksyms.o workaround, and to solve the last known issue of the LLVM linker - add dummy tools in scripts/dummy-tools/ to enable all compiler tests in Kconfig, which will be useful for distro maintainers - support the single switch, LLVM=1 to use Clang and all LLVM utilities instead of GCC and Binutils. - support LLVM_IAS=1 to enable the integrated assembler, which is still experimental * tag 'kbuild-v5.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (36 commits) kbuild: fix comment about missing include guard detection kbuild: support LLVM=1 to switch the default tools to Clang/LLVM kbuild: replace AS=clang with LLVM_IAS=1 kbuild: add dummy toolchains to enable all cc-option etc. in Kconfig kbuild: link lib-y objects to vmlinux forcibly when CONFIG_MODULES=y MIPS: fw: arc: add __weak to prom_meminit and prom_free_prom_memory kbuild: remove -I$(srctree)/tools/include from scripts/Makefile kbuild: do not pass $(KBUILD_CFLAGS) to scripts/mkcompile_h Documentation/llvm: fix the name of llvm-size kbuild: mkcompile_h: Include $LD version in /proc/version kconfig: qconf: Fix a few alignment issues kconfig: qconf: remove some old bogus TODOs kconfig: qconf: fix support for the split view mode kconfig: qconf: fix the content of the main widget kconfig: qconf: Change title for the item window kconfig: qconf: clean deprecated warnings gcc-plugins: drop support for GCC <= 4.7 kbuild: Enable -Wtautological-compare x86: update AS_* macros to binutils >=2.23, supporting ADX and AVX2 crypto: x86 - clean up poly1305-x86_64-cryptogams.S by 'make clean' ...
-
Sedat Dilek authored
I do not longer work for credativ Germany. Please, use my private email address instead. This is for the case when people want to CC me on patches sent from my old business email address. Signed-off-by:
Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by:
-
Trond Myklebust authored
Another brown paper bag moment. pnfs_alloc_ds_commits_list() is leaking the RCU lock. Fixes: a9901899 ("pNFS: Add infrastructure for cleaning up per-layout commit structures") Signed-off-by:
Trond Myklebust <trond.myklebust@hammerspace.com>
-
Xiaoyao Li authored
Two types of #AC can be generated in Intel CPUs: 1. legacy alignment check #AC 2. split lock #AC Reflect #AC back into the guest if the guest has legacy alignment checks enabled or if split lock detection is disabled. If the #AC is not a legacy one and split lock detection is enabled, then invoke handle_guest_split_lock() which will either warn and disable split lock detection for this task or force SIGBUS on it. [ tglx: Switch it to handle_guest_split_lock() and rename the misnamed helper function. ] Suggested-by:
Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by:
Xiaoyao Li <xiaoyao.li@intel.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
Borislav Petkov <bp@suse.de> Acked-by:
Paolo Bonzini <pbonzini@redhat.com> Link: https://lkml.kernel.org/r/20200410115517.176308876@linutronix.de
-
Xiaoyao Li authored
Emulate split-lock accesses as writes if split lock detection is on to avoid #AC during emulation, which will result in a panic(). This should never occur for a well-behaved guest, but a malicious guest can manipulate the TLB to trigger emulation of a locked instruction[1]. More discussion can be found at [2][3]. [1] https://lkml.kernel.org/r/8c5b11c9-58df-38e7-a514-dc12d687b198@redhat.com [2] https://lkml.kernel.org/r/20200131200134.GD18946@linux.intel.com [3] https://lkml.kernel.org/r/20200227001117.GX9940@linux.intel.comSuggested-by:
-
Thomas Gleixner authored
Without at least minimal handling for split lock detection induced #AC, VMX will just run into the same problem as the VMWare hypervisor, which was reported by Kenneth. It will inject the #AC blindly into the guest whether the guest is prepared or not. Provide a function for guest mode which acts depending on the host SLD mode. If mode == sld_warn, treat it like user space, i.e. emit a warning, disable SLD and mark the task accordingly. Otherwise force SIGBUS. [ bp: Add a !CPU_SUP_INTEL stub for handle_guest_split_lock(). ] Signed-off-by:
-
Masahiro Yamada authored
The keyword here is 'twice' to explain the trick. Signed-off-by:Masahiro Yamada <masahiroy@kernel.org>
-
Linus Torvalds authored
Merge yet more updates from Andrew Morton: - Almost all of the rest of MM (memcg, slab-generic, slab, pagealloc, gup, hugetlb, pagemap, memremap) - Various other things (hfs, ocfs2, kmod, misc, seqfile) * akpm: (34 commits) ipc/util.c: sysvipc_find_ipc() should increase position index kernel/gcov/fs.c: gcov_seq_next() should increase position index fs/seq_file.c: seq_read(): add info message about buggy .next functions drivers/dma/tegra20-apb-dma.c: fix platform_get_irq.cocci warnings change email address for Pali Rohár selftests: kmod: test disabling module autoloading selftests: kmod: fix handling test numbers above 9 docs: admin-guide: document the kernel.modprobe sysctl fs/filesystems.c: downgrade user-reachable WARN_ONCE() to pr_warn_once() kmod: make request_module() return an error when autoloading is disabled mm/memremap: set caching mode for PCI P2PDMA memory to WC mm/memory_hotplug: add pgprot_t to mhp_params powerpc/mm: thread pgprot_t through create_section_mapping() x86/mm: introduce __set_memory_prot() x86/mm: thread pgprot_t through init_memory_mapping() mm/memory_hotplug: rename mhp_restrictions to mhp_params mm/memory_hotplug: drop the flags field from struct mhp_restrictions mm/special: create generic fallbacks for pte_special() and pte_mkspecial() mm/vma: introduce VM_ACCESS_FLAGS mm/vma: define a default value for VM_DATA_DEFAULT_FLAGS ...
-
