- 04 Jul, 2015 40 commits
-
-
Bjorn Helgaas authored
[ Upstream commit 3d9fecf6 ] We enable _CRS on all systems from 2008 and later. On older systems, we ignore _CRS and assume the whole physical address space (excluding RAM and other devices) is available for PCI devices, but on systems that support physical address spaces larger than 4GB, it's doubtful that the area above 4GB is really available for PCI. After d56dbf5b ("PCI: Allocate 64-bit BARs above 4G when possible"), we try to use that space above 4GB *first*, so we're more likely to put a device there. On Juan's Toshiba Satellite Pro U200, BIOS left the graphics, sound, 1394, and card reader devices unassigned (but only after Windows had been booted). Only the sound device had a 64-bit BAR, so it was the only device placed above 4GB, and hence the only device that didn't work. Keep _CRS enabled even on pre-2008 systems if they support physical address space larger than 4GB. Fixes: d56dbf5b ("PCI: Allocate 64-bit BARs above 4G when possible") Reported-and-tested-by:
Juan Dayer <jdayer@outlook.com> Reported-and-tested-by:
Alan Horsfield <alan@hazelgarth.co.uk> Link: https://bugzilla.kernel.org/show_bug.cgi?id=99221 Link: https://bugzilla.opensuse.org/show_bug.cgi?id=907092Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> CC: stable@vger.kernel.org # v3.14+ Signed-off-by:
Sasha Levin <sasha.levin@oracle.com>
-
Mikulas Patocka authored
[ Upstream commit dd4c1b7d ] If the number_of_areas argument was zero the kernel would crash on div-by-zero. Add better input validation. Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org # v3.12+ Signed-off-by:
-
Marc Zyngier authored
[ Upstream commit 4839ddc2 ] Commit fd1d0ddf (KVM: arm/arm64: check IRQ number on userland injection) rightly limited the range of interrupts userspace can inject in a guest, but failed to consider the (unlikely) case where a guest is configured with 1024 interrupts. In this case, interrupts ranging from 1020 to 1023 are unuseable, as they have a special meaning for the GIC CPU interface. Make sure that these number cannot be used as an IRQ. Also delete a redundant (and similarily buggy) check in kvm_set_irq. Reported-by:
Peter Maydell <peter.maydell@linaro.org> Cc: Andre Przywara <andre.przywara@arm.com> Cc: <stable@vger.kernel.org> # 4.1, 4.0, 3.19, 3.18 Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
-
Joe Thornber authored
[ Upstream commit 6096d91a ] The metadata space map has a simplified 'bootstrap' mode that is operational when extending the space maps. Whilst in this mode it's possible for some refcount decrement operations to become queued (eg, as a result of shadowing one of the bitmap indexes). These decrements were not being applied when switching out of bootstrap mode. The effect of this bug was the leaking of a 4k metadata block. This is detected by the latest version of thin_check as a non fatal error. Signed-off-by:
Joe Thornber <ejt@redhat.com> Signed-off-by:
-
Dave P Martin authored
[ Upstream commit b9bcc919 ] The memmap freeing code in free_unused_memmap() computes the end of each memblock by adding the memblock size onto the base. However, if SPARSEMEM is enabled then the value (start) used for the base may already have been rounded downwards to work out which memmap entries to free after the previous memblock. This may cause memmap entries that are in use to get freed. In general, you're not likely to hit this problem unless there are at least 2 memblocks and one of them is not aligned to a sparsemem section boundary. Note that carve-outs can increase the number of memblocks by splitting the regions listed in the device tree. This problem doesn't occur with SPARSEMEM_VMEMMAP, because the vmemmap code deals with freeing the unused regions of the memmap instead of requiring the arch code to do it. This patch gets the memblock base out of the memblock directly when computing the block end address to ensure the correct value is used. Signed-off-by:
Dave Martin <Dave.Martin@arm.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
Mark Rutland authored
[ Upstream commit 46b0567c ] Commit 6c81fe79 ("arm64: enable context tracking") did not update el0_sp_pc to use ct_user_exit, but this appears to have been unintentional. In commit 6ab6463a ("arm64: adjust el0_sync so that a function can be called") we made x0 available, and in the return to userspace we call ct_user_enter in the kernel_exit macro. Due to this, we currently don't correctly inform RCU of the user->kernel transition, and may erroneously account for time spent in the kernel as if we were in an extended quiescent state when CONFIG_CONTEXT_TRACKING is enabled. As we do record the kernel->user transition, a userspace application making accesses from an unaligned stack pointer can demonstrate the imbalance, provoking the following warning: ------------[ cut here ]------------ WARNING: CPU: 2 PID: 3660 at kernel/context_tracking.c:75 context_tracking_enter+0xd8/0xe4() Modules linked in: CPU: 2 PID: 3660 Comm: a.out Not tainted 4.1.0-rc7+ #8 Hardware name: ARM Juno development board (r0) (DT) Call trace: [<ffffffc000089914>] dump_backtrace+0x0/0x124 [<ffffffc000089a48>] show_stack+0x10/0x1c [<ffffffc0005b3cbc>] dump_stack+0x84/0xc8 [<ffffffc0000b3214>] warn_slowpath_common+0x98/0xd0 [<ffffffc0000b330c>] warn_slowpath_null+0x14/0x20 [<ffffffc00013ada4>] context_tracking_enter+0xd4/0xe4 [<ffffffc0005b534c>] preempt_schedule_irq+0xd4/0x114 [<ffffffc00008561c>] el1_preempt+0x4/0x28 [<ffffffc0001b8040>] exit_files+0x38/0x4c [<ffffffc0000b5b94>] do_exit+0x430/0x978 [<ffffffc0000b614c>] do_group_exit+0x40/0xd4 [<ffffffc0000c0208>] get_signal+0x23c/0x4f4 [<ffffffc0000890b4>] do_signal+0x1ac/0x518 [<ffffffc000089650>] do_notify_resume+0x5c/0x68 ---[ end trace 963c192600337066 ]--- This patch adds the missing ct_user_exit to the el0_sp_pc entry path, correcting the context tracking for this case. Signed-off-by:
Mark Rutland <mark.rutland@arm.com> Acked-by:
Will Deacon <will.deacon@arm.com> Fixes: 6c81fe79 ("arm64: enable context tracking") Cc: <stable@vger.kernel.org> # v3.17+ Signed-off-by:
-
Lorenzo Pieralisi authored
[ Upstream commit e2d99736 ] According to the PSCI specification and the SMC/HVC calling convention, PSCI function_ids that are not implemented must return NOT_SUPPORTED as return value. Current KVM implementation takes an unhandled PSCI function_id as an error and injects an undefined instruction into the guest if PSCI implementation is called with a function_id that is not handled by the resident PSCI version (ie it is not implemented), which is not the behaviour expected by a guest when calling a PSCI function_id that is not implemented. This patch fixes this issue by returning NOT_SUPPORTED whenever the kvm PSCI call is executed for a function_id that is not implemented by the PSCI kvm layer. Cc: <stable@vger.kernel.org> # 3.18+ Cc: Christoffer Dall <christoffer.dall@linaro.org> Acked-by:
Sudeep Holla <sudeep.holla@arm.com> Signed-off-by:
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by:
-
Frodo Lai authored
[ Upstream commit 469d7d22 ] The i2c_master_recv() uses readsize to receive data from i2c but compares to size of rdbuf which is always 27. This would cause problem when the max_fingers is not 5. Change the comparison value to readsize instead. Fixes: 36874c7e ("Input: pixcir_i2c_ts - support up to 5 fingers and hardware tracking IDs:) Cc: stable@vger.kernel.org Signed-off-by:
Frodo Lai <frodo_lai@bcmcom.com> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Hon Ching \(Vicky\) Lo authored
[ Upstream commit 9d75f089 ] tpm_ibmvtpm_probe() calls ibmvtpm_reset_crq(ibmvtpm) without having yet set the virtual device in the ibmvtpm structure. So in ibmvtpm_reset_crq, the phype call contains empty unit addresses, ibmvtpm->vdev->unit_address. Signed-off-by:
Hon Ching(Vicky) Lo <honclo@linux.vnet.ibm.com> Signed-off-by:
Joy Latten <jmlatten@linux.vnet.ibm.com> Reviewed-by:
Ashley Lai <ashley@ahsleylai.com> Cc: <stable@vger.kernel.org> Fixes: 132f7629 ("drivers/char/tpm: Add new device driver to support IBM vTPM") Signed-off-by:
Peter Huewe <peterhuewe@gmx.de> Signed-off-by:
-
Jeff Layton authored
[ Upstream commit 764ad8ba ] The current buffer is much too small if you have a relatively long hostname. Bring it up to the size of the one that SETCLIENTID has. Cc: <stable@vger.kernel.org> Reported-by:
Michael Skralivetsky <michael.skralivetsky@primarydata.com> Signed-off-by:
Jeff Layton <jeff.layton@primarydata.com> Signed-off-by:
Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by:
-
Mimi Zohar authored
[ Upstream commit 45b26133 ] This patch fixes a bug introduced in "4d7aeee ima: define new template ima-ng and template fields d-ng and n-ng". Changelog: - change int to uint32 (Roberto Sassu's suggestion) Signed-off-by:
Mimi Zohar <zohar@linux.vnet.ibm.com> Signed-off-by:
Roberto Sassu <rsassu@suse.de> Cc: stable@vger.kernel.org # 3.13 Signed-off-by:
-
Maxime Coquelin authored
[ Upstream commit 921cc294 ] The way the mask is generated in regmap_field_init() is wrong. Indeed, a field initialized with msb = 31 and lsb = 0 provokes a shift overflow while calculating the mask field. On some 32 bits architectures, such as x86, the generated mask is 0, instead of the expected 0xffffffff. This patch uses GENMASK() to fix the problem, as this macro is already safe regarding shift overflow. Signed-off-by:
Maxime Coquelin <maxime.coquelin@st.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org Signed-off-by:
-
Arnd Bergmann authored
[ Upstream commit 4b200b46 ] This fixes a several year old regression that I found while trying to get the Yoga 3 11 to work. The ideapad_rfk_set function is meant to send a command to the embedded controller through ACPI, but as of c1f73658, it sends the index of the rfkill device instead of the command, and ignores the opcode field. This changes it back to the original behavior, which indeed flips the rfkill state as seen in the debugfs interface. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Fixes: c1f73658 ("ideapad: pass ideapad_priv as argument (part 2)") Cc: stable@vger.kernel.org # v2.6.38+ Signed-off-by:
Darren Hart <dvhart@linux.intel.com> Signed-off-by:
-
Joseph Qi authored
[ Upstream commit 6f6a6fda ] If updating journal superblock fails after journal data has been flushed, the error is omitted and this will mislead the caller as a normal case. In ocfs2, the checkpoint will be treated successfully and the other node can get the lock to update. Since the sb_start is still pointing to the old log block, it will rewrite the journal data during journal recovery by the other node. Thus the new updates will be overwritten and ocfs2 corrupts. So in above case we have to return the error, and ocfs2_commit_cache will take care of the error and prevent the other node to do update first. And only after recovering journal it can do the new updates. The issue discussion mail can be found at: https://oss.oracle.com/pipermail/ocfs2-devel/2015-June/010856.html http://comments.gmane.org/gmane.comp.file-systems.ext4/48841 [ Fixed bug in patch which allowed a non-negative error return from jbd2_cleanup_journal_tail() to leak out of jbd2_fjournal_flush(); this was causing xfstests ext4/306 to fail. -- Ted ] Reported-by:
Yiwen Jiang <jiangyiwen@huawei.com> Signed-off-by:
Joseph Qi <joseph.qi@huawei.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Tested-by:
-
Arun Chandran authored
[ Upstream commit 15b8d2c4 ] In big endian mode regmap_bulk_read gives incorrect data for byte reads. This is because memcpy of a single byte from an address after full word read gives different results when endianness differs. ie. we get little-end in LE and big-end in BE. Signed-off-by:
Arun Chandran <achandran@mvista.com> Signed-off-by:
-
Dmitry Monakhov authored
[ Upstream commit b4f1afcd ] jbd2_cleanup_journal_tail() can be invoked by jbd2__journal_start() So allocations should be done with GFP_NOFS [Full stack trace snipped from 3.10-rh7] [<ffffffff815c4bd4>] dump_stack+0x19/0x1b [<ffffffff8105dba1>] warn_slowpath_common+0x61/0x80 [<ffffffff8105dcca>] warn_slowpath_null+0x1a/0x20 [<ffffffff815c2142>] slab_pre_alloc_hook.isra.31.part.32+0x15/0x17 [<ffffffff8119c045>] kmem_cache_alloc+0x55/0x210 [<ffffffff811477f5>] ? mempool_alloc_slab+0x15/0x20 [<ffffffff811477f5>] mempool_alloc_slab+0x15/0x20 [<ffffffff81147939>] mempool_alloc+0x69/0x170 [<ffffffff815cb69e>] ? _raw_spin_unlock_irq+0xe/0x20 [<ffffffff8109160d>] ? finish_task_switch+0x5d/0x150 [<ffffffff811f1a8e>] bio_alloc_bioset+0x1be/0x2e0 [<ffffffff8127ee49>] blkdev_issue_flush+0x99/0x120 [<ffffffffa019a733>] jbd2_cleanup_journal_tail+0x93/0xa0 [jbd2] -->GFP_KERNEL [<ffffffffa019aca1>] jbd2_log_do_checkpoint+0x221/0x4a0 [jbd2] [<ffffffffa019afc7>] __jbd2_log_wait_for_space+0xa7/0x1e0 [jbd2] [<ffffffffa01952d8>] start_this_handle+0x2d8/0x550 [jbd2] [<ffffffff811b02a9>] ? __memcg_kmem_put_cache+0x29/0x30 [<ffffffff8119c120>] ? kmem_cache_alloc+0x130/0x210 [<ffffffffa019573a>] jbd2__journal_start+0xba/0x190 [jbd2] [<ffffffff811532ce>] ? lru_cache_add+0xe/0x10 [<ffffffffa01c9549>] ? ext4_da_write_begin+0xf9/0x330 [ext4] [<ffffffffa01f2c77>] __ext4_journal_start_sb+0x77/0x160 [ext4] [<ffffffffa01c9549>] ext4_da_write_begin+0xf9/0x330 [ext4] [<ffffffff811446ec>] generic_file_buffered_write_iter+0x10c/0x270 [<ffffffff81146918>] __generic_file_write_iter+0x178/0x390 [<ffffffff81146c6b>] __generic_file_aio_write+0x8b/0xb0 [<ffffffff81146ced>] generic_file_aio_write+0x5d/0xc0 [<ffffffffa01bf289>] ext4_file_write+0xa9/0x450 [ext4] [<ffffffff811c31d9>] ? pipe_read+0x379/0x4f0 [<ffffffff811b93f0>] do_sync_write+0x90/0xe0 [<ffffffff811b9b6d>] vfs_write+0xbd/0x1e0 [<ffffffff811ba5b8>] SyS_write+0x58/0xb0 [<ffffffff815d4799>] system_call_fastpath+0x16/0x1b Signed-off-by:
Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by:
-
Alexander Usyskin authored
[ Upstream commit 3dc196ea ] Fix the hbm power gating state machine so it will wait till it receives confirmation interrupt for the PG_ISOLATION_EXIT message. In process of the suspend flow the devices first have to exit from the power gating state (runtime pm resume). If we do not handle the confirmation interrupt after sending PG_ISOLATION_EXIT message, we may receive it already after the suspend flow has changed the device state and interrupt will be interpreted as a spurious event, consequently link reset will be invoked which will prevent the device from completing the suspend flow kernel: [6603] mei_reset:136: mei_me 0000:00:16.0: powering down: end of reset kernel: [476] mei_me_irq_thread_handler:643: mei_me 0000:00:16.0: function called after ISR to handle the interrupt processing. kernel: mei_me 0000:00:16.0: FW not ready: resetting Cc: <stable@vger.kernel.org> #3.18+ Cc: Gabriele Mazzotta <gabriele.mzt@gmail.com> Link: https://bugzilla.kernel.org/show_bug.cgi?id=86241 Link: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=770397Tested-by:
Gabriele Mazzotta <gabriele.mzt@gmail.com> Signed-off-by:
Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by:
Tomas Winkler <tomas.winkler@intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Ryan Underwood authored
[ Upstream commit 2fb22a80 ] Disable write buffering on the Toshiba ToPIC95 if it is enabled by somebody (it is not supposed to be a power-on default according to the datasheet). On the ToPIC95, practically no 32-bit Cardbus card will work under heavy load without locking up the whole system if this is left enabled. I tried about a dozen. It does not affect 16-bit cards. This is similar to the O2 bugs in early controller revisions it seems. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=55961 Cc: <stable@vger.kernel.org> Signed-off-by:
Ryan C. Underwood <nemesis@icequake.net> Signed-off-by:
Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by:
-
Theodore Ts'o authored
[ Upstream commit bdf96838 ] The commit cf108bca: "ext4: Invert the locking order of page_lock and transaction start" caused __ext4_journalled_writepage() to drop the page lock before the page was written back, as part of changing the locking order to jbd2_journal_start -> page_lock. However, this introduced a potential race if there was a truncate racing with the data=journalled writeback mode. Fix this by grabbing the page lock after starting the journal handle, and then checking to see if page had gotten truncated out from under us. This fixes a number of different warnings or BUG_ON's when running xfstests generic/086 in data=journalled mode, including: jbd2_journal_dirty_metadata: vdc-8: bad jh for block 115643: transaction (ee3fe7 c0, 164), jh->b_transaction ( (null), 0), jh->b_next_transaction ( (null), 0), jlist 0 - and - kernel BUG at /usr/projects/linux/ext4/fs/jbd2/transaction.c:2200! ... Call Trace: [<c02b2ded>] ? __ext4_journalled_invalidatepage+0x117/0x117 [<c02b2de5>] __ext4_journalled_invalidatepage+0x10f/0x117 [<c02b2ded>] ? __ext4_journalled_invalidatepage+0x117/0x117 [<c027d883>] ? lock_buffer+0x36/0x36 [<c02b2dfa>] ext4_journalled_invalidatepage+0xd/0x22 [<c0229139>] do_invalidatepage+0x22/0x26 [<c0229198>] truncate_inode_page+0x5b/0x85 [<c022934b>] truncate_inode_pages_range+0x156/0x38c [<c0229592>] truncate_inode_pages+0x11/0x15 [<c022962d>] truncate_pagecache+0x55/0x71 [<c02b913b>] ext4_setattr+0x4a9/0x560 [<c01ca542>] ? current_kernel_time+0x10/0x44 [<c026c4d8>] notify_change+0x1c7/0x2be [<c0256a00>] do_truncate+0x65/0x85 [<c0226f31>] ? file_ra_state_init+0x12/0x29 - and - WARNING: CPU: 1 PID: 1331 at /usr/projects/linux/ext4/fs/jbd2/transaction.c:1396 irty_metadata+0x14a/0x1ae() ... Call Trace: [<c01b879f>] ? console_unlock+0x3a1/0x3ce [<c082cbb4>] dump_stack+0x48/0x60 [<c0178b65>] warn_slowpath_common+0x89/0xa0 [<c02ef2cf>] ? jbd2_journal_dirty_metadata+0x14a/0x1ae [<c0178bef>] warn_slowpath_null+0x14/0x18 [<c02ef2cf>] jbd2_journal_dirty_metadata+0x14a/0x1ae [<c02d8615>] __ext4_handle_dirty_metadata+0xd4/0x19d [<c02b2f44>] write_end_fn+0x40/0x53 [<c02b4a16>] ext4_walk_page_buffers+0x4e/0x6a [<c02b59e7>] ext4_writepage+0x354/0x3b8 [<c02b2f04>] ? mpage_release_unused_pages+0xd4/0xd4 [<c02b1b21>] ? wait_on_buffer+0x2c/0x2c [<c02b5a4b>] ? ext4_writepage+0x3b8/0x3b8 [<c02b5a5b>] __writepage+0x10/0x2e [<c0225956>] write_cache_pages+0x22d/0x32c [<c02b5a4b>] ? ext4_writepage+0x3b8/0x3b8 [<c02b6ee8>] ext4_writepages+0x102/0x607 [<c019adfe>] ? sched_clock_local+0x10/0x10e [<c01a8a7c>] ? __lock_is_held+0x2e/0x44 [<c01a8ad5>] ? lock_is_held+0x43/0x51 [<c0226dff>] do_writepages+0x1c/0x29 [<c0276bed>] __writeback_single_inode+0xc3/0x545 [<c0277c07>] writeback_sb_inodes+0x21f/0x36d ... Signed-off-by:
-
Catalin Marinas authored
[ Upstream commit 565630d5 ] After secondary CPU boot or hotplug, the active_mm of the idle thread is &init_mm. The init_mm.pgd (swapper_pg_dir) is only meant for TTBR1_EL1 and must not be set in TTBR0_EL1. Since when active_mm == &init_mm the TTBR0_EL1 is already set to the reserved value, there is no need to perform any context reset. Signed-off-by:
-
Zidan Wang authored
[ Upstream commit a077e81e ] the enum of "DAC Polarity" should be wm8960_enum[1]. Signed-off-by:
Zidan Wang <zidan.wang@freescale.com> Acked-by:
Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by:
-
Lior Amsalem authored
[ Upstream commit 9136291f ] This patch fixes a bug in the XOR driver where the cleanup function can be called and free descriptors that never been processed by the engine (which result in data errors). The cleanup function will free descriptors based on the ownership bit in the descriptors. Fixes: ff7b0479 ("dmaengine: DMA engine driver for Marvell XOR engine") Signed-off-by:
Lior Amsalem <alior@marvell.com> Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by:
Ofer Heifetz <oferh@marvell.com> Cc: stable@vger.kernel.org Signed-off-by:
Vinod Koul <vinod.koul@intel.com> Signed-off-by:
-
Cyrille Pitchen authored
[ Upstream commit 93563a6a ] For TX transactions, the TXCOMP bit in the Status Register is cleared when the first data is written into the Transmit Holding Register. In the lines from at91_do_twi_transfer(): at91_twi_write_data_dma(dev); at91_twi_write(dev, AT91_TWI_IER, AT91_TWI_TXCOMP); the TXCOMP interrupt may be enabled before the DMA controller has actually started to write into the THR. In such a case, the TXCOMP bit is still set into the Status Register so the interrupt is triggered immediately. The driver understands that a transaction completion has occurred but this transaction hasn't started yet. Hence the TXCOMP interrupt is no longer enabled by at91_do_twi_transfer() but instead by at91_twi_write_data_dma_callback(). Also, the TXCOMP bit in the Status Register in not a clear on read flag but a snapshot of the transmission state at the time the Status Register is read. When a NACK error is dectected by the I2C controller, the TXCOMP, NACK and TXRDY bits are set together to 1 in the SR. If enabled, the TXCOMP interrupt is triggered at the same time. Also setting the TXRDY to 1 triggers the DMA controller to write the next data into the THR. Such a write resets the TXCOMP bit to 0 in the SR. So depending on when the interrupt handler reads the SR, it may fail to detect the NACK error if it relies on the TXCOMP bit. The NACK bit and its interrupt should be used instead. For RX transactions, the TXCOMP bit in the Status Register is cleared when the START bit is set into the Control Register. However to unify the management of the TXCOMP bit when the DMA controller is used, the TXCOMP interrupt is now enabled by the DMA callbacks for both TX and RX transfers. Signed-off-by:
Cyrille Pitchen <cyrille.pitchen@atmel.com> Cc: stable@vger.kernel.org #3.10 and later Acked-by:
Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
-
Thomas Petazzoni authored
[ Upstream commit 27e7cd01 ] The pinctrl_gpio_range[] array described a first bank of 32 GPIOs and a second one of 27 GPIOs. However, since there is a total of 60 MPP pins that can be muxed as GPIOs, the second bank really has 28 GPIOs. Signed-off-by:
Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: <stable@vger.kernel.org> # v3.15+ Fixes: ca6d9a08 ("pinctrl: mvebu: add pin-muxing driver for the Marvell Armada 380/385") Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Thomas Petazzoni authored
[ Upstream commit d538990e ] There was an incorrect space in the definition of the function of one pin in the Armada 375 pinctrl driver, which this commit fixes. Signed-off-by:
-
Thomas Petazzoni authored
[ Upstream commit ea78b951 ] There was a mistake in the definition of the functions for MPP48 on Marvell Armada XP. The second function is dev(clkout), and not tclk. Signed-off-by:
-
Thomas Petazzoni authored
[ Upstream commit 80b3d04f ] The latest version of the Armada XP datasheet no longer documents the VDD cpu_pd functions, which might indicate they are not working and/or not supported. This commit ensures the pinctrl driver matches the datasheet. Signed-off-by:
-
Thomas Petazzoni authored
[ Upstream commit bc99357f ] After updating to a more recent version of the Armada XP datasheet, we realized that some of the pins documented as having a NAND-related functionality in fact did not have such functionality. This commit updates the pinctrl driver accordingly. Signed-off-by:
-
Thomas Petazzoni authored
[ Upstream commit e5447d26 ] After updating to a more recent version of the Armada 375, we realized that some of the pins documented as having a NAND-related functionality in fact did not have such functionality. This commit updates the pinctrl driver accordingly. Signed-off-by:
-
Thomas Petazzoni authored
[ Upstream commit 438881df ] Due to a mistake, the CS0 and CS1 SPI0 functions were incorrectly named "spi0-1" instead of just "spi0". This commit fixes that. This DT binding change does not affect any of the in-tree users. Signed-off-by:
-
Thomas Petazzoni authored
[ Upstream commit 331642fb ] A new revision of the Marvell Armada 38x hardware datasheet unveiled that the definition of some of the PCIe functions were not correct. This commit fixes the pinctrl driver accordingly. Some PCIe functions simply do not exist, some of the PCIe functions in fact were corresponding to other functions, and some PCIe functions have been added. Note: the seemingly unrelated removal of spi(cs2) on MPP47 is related: this function is in fact implemented on MPP43, instead of a PCIe function. Signed-off-by:
-
Bjorn Helgaas authored
[ Upstream commit 1dace011 ] The Foxconn K8M890-8237A has two PCI host bridges, and we can't assign resources correctly without the information from _CRS that tells us which address ranges are claimed by which bridge. In the bugs mentioned below, we incorrectly assign a sound card address (this example is from 1033299): bus: 00 index 2 [mem 0x80000000-0xfcffffffff] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7f]) pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xbfefffff] (ignored) pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xdfffffff] (ignored) pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfebfffff] (ignored) ACPI: PCI Root Bridge [PCI1] (domain 0000 [bus 80-ff]) pci_root PNP0A08:01: host bridge window [mem 0xbff00000-0xbfffffff] (ignored) pci 0000:80:01.0: [1106:3288] type 0 class 0x000403 pci 0000:80:01.0: reg 10: [mem 0xbfffc000-0xbfffffff 64bit] pci 0000:80:01.0: address space collision: [mem 0xbfffc000-0xbfffffff 64bit] conflicts with PCI Bus #00 [mem 0x80000000-0xfcffffffff] pci 0000:80:01.0: BAR 0: assigned [mem 0xfd00000000-0xfd00003fff 64bit] BUG: unable to handle kernel paging request at ffffc90000378000 IP: [<ffffffffa0345f63>] azx_create+0x37c/0x822 [snd_hda_intel] We assigned 0xfd_0000_0000, but that is not in any of the host bridge windows, and the sound card doesn't work. Turn on pci=use_crs automatically for this system. Link: https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/931368 Link: https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1033299Signed-off-by:
-
Rafael J. Wysocki authored
[ Upstream commit 3d56402d ] Add missing invocation of pm_generic_complete() to acpi_subsys_complete() to allow ->complete callbacks provided by the drivers of devices using the ACPI PM domain to be executed during system resume. Fixes: f25c0ae2 (ACPI / PM: Avoid resuming devices in ACPI PM domain during system suspend) Cc: 3.16+ <stable@vger.kernel.org> # 3.16+ Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Stefan Wahren authored
[ Upstream commit a7068e39 ] The buffer for condtraints debug isn't big enough to hold the output in all cases. So fix this issue by increasing the buffer. Signed-off-by:
Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by:
-
Alex Williamson authored
[ Upstream commit a5dd4b4b ] The commit referenced below deferred waiting for command completion until the start of the next command, allowing hardware to do the latching asynchronously. Unfortunately, being ready to accept a new command is the only indication we have that the previous command is completed. In cases where we need that state change to be enabled, we must still wait for completion. For instance, pciehp_reset_slot() attempts to disable anything that might generate a surprise hotplug on slots that support presence detection. If we don't wait for those settings to latch before the secondary bus reset, we negate any value in attempting to prevent the spurious hotplug. Create a base function with optional wait and helper functions so that pcie_write_cmd() turns back into the "safe" interface which waits before and after issuing a command and add pcie_write_cmd_nowait(), which eliminates the trailing wait for asynchronous completion. The following functions are returned to their previous behavior: pciehp_power_on_slot pciehp_power_off_slot pcie_disable_notification pciehp_reset_slot The rationale is that pciehp_power_on_slot() enables the link and therefore relies on completion of power-on. pciehp_power_off_slot() and pcie_disable_notification() need a wait because data structures may be freed after these calls and continued signaling from the device would be unexpected. And, of course, pciehp_reset_slot() needs to wait for the scenario outlined above. Fixes: 3461a068 ("PCI: pciehp: Wait for hotplug command completion lazily") Signed-off-by:
Alex Williamson <alex.williamson@redhat.com> Signed-off-by:
-
Christophe Ricard authored
[ Upstream commit 4ac82e89 ] ndlc_remove already calls st21nfcb_nci_i2c_disable and phy->powered is already set to 0. Cc: stable@vger.kernel.org Signed-off-by:
Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by:
Samuel Ortiz <sameo@linux.intel.com> Signed-off-by:
-
Christophe Ricard authored
[ Upstream commit 09f39a95 ] Once the data is sent, we need to preserve the full frame for the ndlc state machine. If the NDLC ACK is not received in time, the ndlc layer will resend the same frame. Having the header byte pulled will corrupt the frame. Cc: stable@vger.kernel.org Signed-off-by:
-
Firo Yang authored
[ Upstream commit 38bd83f0 ] Since ndev->driver_data is allocated by devm_kzalloc(), we do not need the inappropriate kfree to free it in driver's remove function. Freeing will trigger when driver unloads. Cc: stable@vger.kernel.org Acked-by:
Firo Yang <firogm@gmail.com> Signed-off-by:
-
Felix Fietkau authored
[ Upstream commit 300f77c0 ] AR93xx and newer needs to stop rx before tx to avoid getting the DMA engine or MAC into a stuck state. This should reduce/fix the occurence of "Failed to stop Tx DMA" logspam. Cc: stable@vger.kernel.org Signed-off-by:
Felix Fietkau <nbd@openwrt.org> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Marcel Holtmann authored
[ Upstream commit ecffc804 ] The SKB returned from the Intel specific version information command is missing a kfree_skb. Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
Johan Hedberg <johan.hedberg@intel.com> Cc: stable@vger.kernel.org Signed-off-by:
-
