- 04 Jul, 2011 28 commits
-
-
Artem Bityutskiy authored
This is a clean-up of the power-cut emulation code - remove the custom list of superblocks which we maintained to find the superblock by the UBI volume descriptor. We do not need that crud any longer, because now we can get the superblock as a function argument. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
Artem Bityutskiy authored
Now when we use UBIFS helpers for all the I/O, we can remove the horrible hack of re-defining UBI I/O functions. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
Artem Bityutskiy authored
Switch the rest of direct UBI calls to UBIFS helper functions. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
Artem Bityutskiy authored
Stop using 'ubi_leb_write()' directly and switch to the 'ubifs_leb_write()' helper. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
Artem Bityutskiy authored
Instead of using 'ubi_read()' function directly, used the 'ubifs_leb_read()' helper function instead. This allows to get rid of several redundant error messages and make sure that we always have a stack dump on read errors. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
Artem Bityutskiy authored
Introduce the following I/O helper functions: 'ubifs_leb_read()', 'ubifs_leb_write()', 'ubifs_leb_change()', 'ubifs_leb_unmap()', 'ubifs_leb_map()', 'ubifs_is_mapped(). The idea is to wrap all UBI I/O functions in order to encapsulate various assertions and error path handling (error message, stack dump, switching to R/O mode). And there are some other benefits of this which will be used in the following patches. This patch does not switch whole UBIFS to use these functions yet. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
Artem Bityutskiy authored
When switching to R/O mode due to an I/O error, always dump the stack, not only when debugging is enabled. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
Artem Bityutskiy authored
This patch contains several minor clean-up and preparational cahnges. 1. Remove 'dbg_read()', 'dbg_write()', 'dbg_change()', and 'dbg_leb_erase()' functions as they are not used. 2. Remove 'dbg_leb_read()' and 'dbg_is_mapped()' as they are not really needed, it is fine to let reads go through in failure mode. 3. Rename 'offset' argument to 'offs' to be consistent with the rest of UBIFS code. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
Artem Bityutskiy authored
Now we have per-FS (superblock) debugfs knobs, but they have one drawback - you have to first mount the FS and only after this you can switch self-checks on/off. But often we want to have the checks enabled during the mount. Introduce global debugging knobs for this purpose. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
Artem Bityutskiy authored
Separate out pieces of code from the debugfs file read/write functions and create separate 'interpret_user_input()'/'provide_user_output()' helpers. These helpers will be needed in one of the following patches, so this is just a preparational change. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
Artem Bityutskiy authored
Move 'dbg_debugfs_init()' and 'dbg_debugfs_exit()' functions which initialize debugfs for whole UBIFS subsystem below the code which initializes debugfs for a particular UBIFS instance. And do the same for 'ubifs_debugging_init()' and 'ubifs_debugging_exit()' functions. This layout is a bit better for the next patches, so this is just a preparation. Also, rename 'open_debugfs_file()' into 'dfs_file_open()' for consistency. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
Artem Bityutskiy authored
When we are testing UBIFS recovery, it is better to print in which eraseblock we are going to fail. Currently UBIFS prints it only if recovery debugging messages are enabled, but this is not very practical. So change 'dbg_rcvry()' messages to 'ubifs_warn()' messages. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
Artem Bityutskiy authored
UBIFS has many built-in self-check functions which can be enabled using the debug_chks module parameter or the corresponding sysfs file (/sys/module/ubifs/parameters/debug_chks). However, this is not flexible enough because it is not per-filesystem. This patch moves this to debugfs interfaces. We already have debugfs support, so this patch just adds more debugfs files. While looking at debugfs support I've noticed that it is racy WRT file-system unmount, and added a TODO entry for that. This problem has been there for long time and it is quite standard debugfs PITA. The plan is to fix this later. This patch is simple, but it is large because it changes many places where we check if a particular type of checks is enabled or disabled. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
Artem Bityutskiy authored
We have too many different debugging checks - lessen the amount by merging all index-related checks into one. At the same time, move the "force in-the-gap" test to the "index checks" class, because it is too heavy for the "general" class. This patch merges TNC, Old index, and Index size check and calles this just "index checks". Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
Artem Bityutskiy authored
This patch introduces helper functions for all debugging checks, so instead of doing if (!(ubifs_chk_flags & UBIFS_CHK_GEN)) we now do if (!dbg_is_chk_gen(c)) This is a preparation to further changes where the flags will go away, and we'll need to only change the helper functions, but the code which utilizes them won't be touched. At the same time this patch removes 'dbg_force_in_the_gaps()', 'dbg_force_in_the_gaps_enabled()', and dbg_failure_mode helpers for consistency. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
Artem Bityutskiy authored
Add 'const struct ubifs_info *c' parameter to 'dbg_check_synced_i_size()' function because we'll need it in the next patch when we switch to debugfs. So this patch is just a preparation. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
Artem Bityutskiy authored
Add 'struct ubifs_info *c' parameter to the 'dbg_check_name()' debugging function - it will be needed in one of the following commits where we switch to debugfs. So this is just a preparation. Mark parameters as 'const' while on it. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
Artem Bityutskiy authored
Add a couple of comments - while looking into TNC I could not easily figure out few facts, so it is a good idea to document them in the code. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
Artem Bityutskiy authored
The UBIFS lpt tree is in many aspects similar to the TNC tree, and we have similar flags for these trees. And by mistake we use the COW_ZNODE flag for LPT in some places, instead of the right flag COW_CNODE. And this works only because these two constants have the same value. This patch makes all the LPT code to use COW_CNODE and also changes COW_CNODE constant value to make sure we do not misuse the flags any more. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
Artem Bityutskiy authored
We have 3 znode flags: cow, obsolete, dirty. For the last flag we have a 'ubifs_zn_dirty()' helper function, but for the other 2 flags we use 'test_bit()' directly. This patch makes the situation more consistent and introduces helpers for the other 2 flags: 'ubifs_zn_cow()' and 'ubifs_zn_obsolete()'. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
Artem Bityutskiy authored
Remove dead pieces of code under "if (c->min_io_size == 1)" statement - we never execute it because in UBIFS 'c->min_io_size' is always at least 8. This are leftovers from old pre-mainline prototype. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
Artem Bityutskiy authored
Remove unnecessary brackets in "inode->i_flags |= (S_NOCMTIME)" statement to make the code not look silly. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
Artem Bityutskiy authored
Instead of using long "(inode->i_mode & S_IFMT) != S_IFREG" expression, use shorted "!S_ISREG(inode->i_mode)". Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
Artem Bityutskiy authored
Since this function is not only about size checking, rename it to 'dbg_check_dir()'. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
Artem Bityutskiy authored
Teach 'dbg_dump_inode()' dump directory entries for directory inodes. This requires few additional changes: 1. The 'c' argument of 'dbg_dump_inode()' cannot be const any more. 2. Users of 'dbg_dump_inode()' should not have 'tnc_mutex' locked. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
Artem Bityutskiy authored
When we fail to read a pnode or nnode - print stacktrace if debugging is enabled. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
Artem Bityutskiy authored
This patch lessens the 'struct ubifs_debug_info' size by 90 bytes by allocating less bytes for the debugfs root directory name. It introduces macros for the name patter an length instead of hard-coding 100 bytes. It also makes UBIFS use 'snprintf()' and teaches it to gracefully catch situations when the name array is too short. Additionally, this patch makes 2 unrelated changes - I just thought they do not deserve separate commits: simplifies 'ubifs_assert()' for non-debugging case and makes 'dbg_debugfs_init()' properly verify debugfs return code which may be an error code or NULL, so we should you 'IS_ERR_OR_NULL()' instead of 'IS_ERR()'. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
Artem Bityutskiy authored
If commit failed and it is in broken state, UBIFS switches to R/O mode. Most operations return -EROFS in this case, except of commit which returns -EINVAL. Make it return -EROFS too for consistency. This is also important for our power cut emulation testing. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
- 28 Jun, 2011 12 commits
-
-
Linus Torvalds authored
-
Hugh Dickins authored
When auditing the locking in i915_gem.c (for a prospective change which I then abandoned), I noticed two places where struct_mutex is not held across GEM object manipulations that would usually require it. Since one is in initial setup and the other in driver unload, I'm guessing the mutex is not required for either; but post a patch in case it is. Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Keith Packard <keithp@keithp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Hugh Dickins authored
The interface to ->truncate_range is changing very slightly: once "tmpfs: take control of its truncate_range" has been applied, this can be applied. For now there is only a slight inefficiency while this remains unapplied, but it will soon become essential for managing shmem's use of swap. Change i915_gem_object_truncate() to use shmem_truncate_range() directly: which should also spare i915 later change if we switch from inode_operations->truncate_range to file_operations->fallocate. Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Keith Packard <keithp@keithp.com> Cc: Dave Airlie <airlied@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Hugh Dickins authored
Soon tmpfs will stop supporting ->readpage and read_cache_page_gfp(): once "tmpfs: add shmem_read_mapping_page_gfp" has been applied, this patch can be applied to ease the transition. Make i915_gem_object_get_pages_gtt() use shmem_read_mapping_page_gfp() in the one place it's needed; elsewhere use shmem_read_mapping_page(), with the mapping's gfp_mask properly initialized. Forget about __GFP_COLD: since tmpfs initializes its pages with memset, asking for a cold page is counter-productive. Include linux/shmem_fs.h also in drm_gem.c: with shmem_file_setup() now declared there too, we shall remove the prototype from linux/mm.h later. Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Keith Packard <keithp@keithp.com> Cc: Dave Airlie <airlied@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Hugh Dickins authored
Soon tmpfs will stop supporting ->readpage and read_mapping_page(): once "tmpfs: add shmem_read_mapping_page_gfp" has been applied, this patch can be applied to ease the transition. ttm_tt_swapin() and ttm_tt_swapout() use shmem_read_mapping_page() in place of read_mapping_page(), since their swap_space has been created with shmem_file_setup(). Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Dave Airlie <airlied@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Andrew Morton authored
Fis the warning drivers/tty/serial/8250_pci.c:1457: warning: initialization from incompatible pointer type Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Ralf Baechle authored
Fix this section mismatch: WARNING: drivers/misc/ioc4.o(.data+0x144): Section mismatch in reference from the variable ioc4_load_modules_work to the function .devinit.text:ioc4_load_modules() The variable ioc4_load_modules_work references the function __devinit ioc4_load_modules() If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *driver, *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console This one is potentially fatal; by the time ioc4_load_modules is invoked it may already have been freed. For that reason ioc4_load_modules_work can't be turned to __devinitdata but also because it's referenced in ioc4_exit. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: Brent Casavant <bcasavan@sgi.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Ralf Baechle authored
Fix this section mismatch: WARNING: drivers/leds/leds-lp5523.o(.text+0x12f4): Section mismatch in reference from the function lp5523_probe() to the function .init.text:lp5523_init_led() The function lp5523_probe() references the function __init lp5523_init_led(). This is often because lp5523_probe lacks a __init annotation or the annotation of lp5523_init_led is wrong. Fixing this one triggers one more mismatch, fix that one as well. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Ralf Baechle authored
Fix this section mismatch: WARNING: drivers/leds/leds-lp5521.o(.text+0xf2c): Section mismatch in reference from the function lp5521_probe() to the function .init.text:lp5521_init_led() The function lp5521_probe() references the function __init lp5521_init_led(). This is often because lp5521_probe lacks a __init annotation or the annotation of lp5521_init_led is wrong. Fixing this mismatch triggers one more mismatch, fix that one as well. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
KAMEZAWA Hiroyuki authored
Commit d149e3b2 ("memcg: add the soft_limit reclaim in global direct reclaim") adds a softlimit hook to shrink_zones(). By this, soft limit is called as try_to_free_pages() do_try_to_free_pages() shrink_zones() mem_cgroup_soft_limit_reclaim() Then, direct reclaim is memcg softlimit hint aware, now. But, the memory cgroup's "limit" path can call softlimit shrinker. try_to_free_mem_cgroup_pages() do_try_to_free_pages() shrink_zones() mem_cgroup_soft_limit_reclaim() This will cause a global reclaim when a memcg hits limit. This is bug. soft_limit_reclaim() should be called when scanning_global_lru(sc) == true. And the commit adds a variable "total_scanned" for counting softlimit scanned pages....it's not "total". This patch removes the variable and update sc->nr_scanned instead of it. This will affect shrink_slab()'s scan condition but, global LRU is scanned by softlimit and I think this change makes sense. TODO: avoid too much scanning of a zone when softlimit did enough work. Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Ying Han <yinghan@google.com> Cc: Michal Hocko <mhocko@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Vasiliy Kulikov authored
Currently a single process may register exit handlers unlimited times. It may lead to a bloated listeners chain and very slow process terminations. Eg after 10KK sent TASKSTATS_CMD_ATTR_REGISTER_CPUMASKs ~300 Mb of kernel memory is stolen for the handlers chain and "time id" shows 2-7 seconds instead of normal 0.003. It makes it possible to exhaust all kernel memory and to eat much of CPU time by triggerring numerous exits on a single CPU. The patch limits the number of times a single process may register itself on a single CPU to one. One little issue is kept unfixed - as taskstats_exit() is called before exit_files() in do_exit(), the orphaned listener entry (if it was not explicitly deregistered) is kept until the next someone's exit() and implicit deregistration in send_cpu_listeners(). So, if a process registered itself as a listener exits and the next spawned process gets the same pid, it would inherit taskstats attributes. Signed-off-by: Vasiliy Kulikov <segooon@gmail.com> Cc: Balbir Singh <bsingharora@gmail.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Jan Kara authored
Under heavy memory and filesystem load, users observe the assertion mapping->nrpages == 0 in end_writeback() trigger. This can be caused by page reclaim reclaiming the last page from a mapping in the following race: CPU0 CPU1 ... shrink_page_list() __remove_mapping() __delete_from_page_cache() radix_tree_delete() evict_inode() truncate_inode_pages() truncate_inode_pages_range() pagevec_lookup() - finds nothing end_writeback() mapping->nrpages != 0 -> BUG page->mapping = NULL mapping->nrpages-- Fix the problem by doing a reliable check of mapping->nrpages under mapping->tree_lock in end_writeback(). Analyzed by Jay <jinshan.xiong@whamcloud.com>, lost in LKML, and dug out by Miklos Szeredi <mszeredi@suse.de>. Cc: Jay <jinshan.xiong@whamcloud.com> Cc: Miklos Szeredi <mszeredi@suse.de> Signed-off-by: Jan Kara <jack@suse.cz> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-