- 18 Feb, 2021 4 commits
-
-
Maxim Levitsky authored
trace_kvm_exit prints this value (using vmx_get_exit_info) so it makes sense to read it before the trace point. Fixes: dcf068da ("KVM: VMX: Introduce generic fastpath handler") Signed-off-by:
Maxim Levitsky <mlevitsk@redhat.com> Message-Id: <20210217145718.1217358-2-mlevitsk@redhat.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Sean Christopherson authored
Remove the restriction that prevents VMX from exposing INVPCID to the guest without PCID also being exposed to the guest. The justification of the restriction is that INVPCID will #UD if it's disabled in the VMCS. While that is a true statement, it's also true that RDTSCP will #UD if it's disabled in the VMCS. Neither of those things has any dependency whatsoever on the guest being able to set CR4.PCIDE=1, which is what is effectively allowed by exposing PCID to the guest. Removing the bogus restriction aligns VMX with SVM, and also allows for an interesting configuration. INVPCID is that fastest way to do a global TLB flush, e.g. see native_flush_tlb_global(). Allowing INVPCID without PCID would let a guest use the expedited flush while also limiting the number of ASIDs consumed by the guest. Signed-off-by:
Sean Christopherson <seanjc@google.com> Message-Id: <20210212003411.1102677-4-seanjc@google.com> Reviewed-by:
Jim Mattson <jmattson@google.com> Signed-off-by:
-
Sean Christopherson authored
Advertise INVPCID by default (if supported by the host kernel) instead of having both SVM and VMX opt in. INVPCID was opt in when it was a VMX only feature so that KVM wouldn't prematurely advertise support if/when it showed up in the kernel on AMD hardware. Signed-off-by:
-
Sean Christopherson authored
Intercept INVPCID if it's disabled in the guest, even when using NPT, as KVM needs to inject #UD in this case. Fixes: 4407a797 ("KVM: SVM: Enable INVPCID feature on AMD") Cc: Babu Moger <babu.moger@amd.com> Signed-off-by:
-
- 15 Feb, 2021 2 commits
-
-
Paolo Bonzini authored
The variable in practice will never be uninitialized, because the loop will always go through at least one iteration. In case it would not, make vcpu_get_cpuid report an assertion failure. Signed-off-by: -
Ignacio Alvarado authored
This test launches 512 VMs in serial and kills them after a random amount of time. The test was original written to exercise KVM user notifiers in the context of1650b4ebc99d: - KVM: Disable irq while unregistering user notifier - https://lore.kernel.org/kvm/CACXrx53vkO=HKfwWwk+fVpvxcNjPrYmtDZ10qWxFvVX_PTGp3g@mail.gmail.com/ Recently, this test piqued my interest because it proved useful to for AMD SNP in exercising the "in-use" pages, described in APM section 15.36.12, "Running SNP-Active Virtual Machines". Signed-off-by:
Ignacio Alvarado <ikalvarado@google.com> Signed-off-by:
Marc Orr <marcorr@google.com> Message-Id: <20210213001452.1719001-1-marcorr@google.com> Signed-off-by:
-
- 12 Feb, 2021 7 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarmPaolo Bonzini authored
KVM/arm64 updates for Linux 5.12 - Make the nVHE EL2 object relocatable, resulting in much more maintainable code - Handle concurrent translation faults hitting the same page in a more elegant way - Support for the standard TRNG hypervisor call - A bunch of small PMU/Debug fixes - Allow the disabling of symbol export from assembly code - Simplification of the early init hypercall handling
-
Marc Zyngier authored
Signed-off-by:Marc Zyngier <maz@kernel.org>
-
Marc Zyngier authored
Signed-off-by: -
Marc Zyngier authored
Signed-off-by: -
Marc Zyngier authored
Signed-off-by: -
Marc Zyngier authored
Signed-off-by: -
Marc Zyngier authored
KVM/arm64 fixes for 5.11, take #2 - Don't allow tagged pointers to point to memslots - Filter out ARMv8.1+ PMU events on v8.0 hardware - Hide PMU registers from userspace when no PMU is configured - More PMU cleanups - Don't try to handle broken PSCI firmware - More sys_reg() to reg_to_encoding() conversions Signed-off-by:
-
- 11 Feb, 2021 12 commits
-
-
Sean Christopherson authored
Add a 2 byte pad to struct compat_vcpu_info so that the sum size of its fields is actually 64 bytes. The effective size without the padding is also 64 bytes due to the compiler aligning evtchn_pending_sel to a 4-byte boundary, but depending on compiler alignment is subtle and unnecessary. Opportunistically replace spaces with tables in the other fields. Cc: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by:
David Woodhouse <dwmw@amazon.co.uk> Signed-off-by:
-
Sean Christopherson authored
Don't bother mapping the Xen shinfo pages into the guest, they don't need to be accessed using the GVAs and passing a define with "GPA" in the name to addr_gva2hpa() is confusing. Cc: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by:
-
Sean Christopherson authored
The Xen shinfo selftest uses '40' when setting the GPA of the vCPU info struct, but checks for the result at '0x40'. Arbitrarily use the hex version to resolve the bug. Fixes: 8d4e7e80 ("KVM: x86: declare Xen HVM shared info capability and add test case") Cc: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by:
-
Sean Christopherson authored
For better or worse, the memslot APIs take the number of pages, not the size in bytes. The Xen tests need 2 pages, not 8192 pages. Fixes: 8d4e7e80 ("KVM: x86: declare Xen HVM shared info capability and add test case") Cc: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by:
-
Sean Christopherson authored
Add the new Xen test binaries to KVM selftest's .gitnore. Signed-off-by:
-
Peter Shier authored
Fixes: 678e90a3 ("KVM: selftests: Test IPI to halted vCPU in xAPIC while backing page moves") Cc: Andrew Jones <drjones@redhat.com> Cc: Jim Mattson <jmattson@google.com> Signed-off-by:
Peter Shier <pshier@google.com> Signed-off-by:
-
Ricardo Koller authored
Building the KVM selftests with LLVM's integrated assembler fails with: $ CFLAGS=-fintegrated-as make -C tools/testing/selftests/kvm CC=clang lib/x86_64/svm.c:77:16: error: too few operands for instruction asm volatile ("vmsave\n\t" : : "a" (vmcb_gpa) : "memory"); ^ <inline asm>:1:2: note: instantiated into assembly here vmsave ^ lib/x86_64/svm.c:134:3: error: too few operands for instruction "vmload\n\t" ^ <inline asm>:1:2: note: instantiated into assembly here vmload ^ This is because LLVM IAS does not currently support calling vmsave, vmload, or vmload without an explicit %rax operand. Add an explicit operand to vmsave, vmload, and vmrum in svm.c. Fixing this was suggested by Sean Christopherson. Tested: building without this error in clang 11. The following patch (not queued yet) needs to be applied to solve the other remaining error: "selftests: kvm: remove reassignment of non-absolute variables". Suggested-by:Ricardo Koller <ricarkol@google.com> Message-Id: <20210210031719.769837-1-ricarkol@google.com> Signed-off-by:
-
Wei Yongjun authored
The sparse tool complains as follows: arch/x86/kvm/svm/svm.c:204:6: warning: symbol 'svm_gp_erratum_intercept' was not declared. Should it be static? This symbol is not used outside of svm.c, so this commit marks it static. Fixes: 82a11e9c ("KVM: SVM: Add emulation support for #GP triggered by SVM instructions") Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Message-Id: <20210210075958.1096317-1-weiyongjun1@huawei.com> Signed-off-by:
-
Paolo Bonzini authored
Merge tag 'kvm-ppc-next-5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc into HEAD PPC KVM update for 5.12 - Support for second data watchpoint on POWER10, from Ravi Bangoria - Remove some complex workarounds for buggy early versions of POWER9 - Guest entry/exit fixes from Nick Piggin and Fabiano Rosas
-
Waiman Long authored
include/asm-generic/qrwlock.h was trying to get arch_spin_is_locked via asm-generic/qspinlock.h. However, this does not work because architectures might be using queued rwlocks but not queued spinlocks (csky), or because they might be defining their own queued_* macros before including asm/qspinlock.h. To fix this, ensure that asm/spinlock.h always includes qrwlock.h after defining arch_spin_is_locked (either directly for csky, or via asm/qspinlock.h for other architectures). The only inclusion elsewhere is in kernel/locking/qrwlock.c. That one is really unnecessary because the file is only compiled in SMP configurations (config QUEUED_RWLOCKS depends on SMP) and in that case linux/spinlock.h already includes asm/qrwlock.h if needed, via asm/spinlock.h. Reported-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Waiman Long <longman@redhat.com> Fixes: 26128cb6 ("locking/rwlocks: Add contention detection for rwlocks") Tested-by:
Ben Gardon <bgardon@google.com> [Add arch/sparc and kernel/locking parts per discussion with Waiman. - Paolo] Signed-off-by:
-
Nicholas Piggin authored
Commit 68ad28a4 ("KVM: PPC: Book3S HV: Fix radix guest SLB side channel") incorrectly removed the radix host instruction patch to skip re-loading the host SLB entries when exiting from a hash guest. Restore it. Fixes: 68ad28a4 ("KVM: PPC: Book3S HV: Fix radix guest SLB side channel") Signed-off-by:
Nicholas Piggin <npiggin@gmail.com> Signed-off-by:
Paul Mackerras <paulus@ozlabs.org>
-
Paul Mackerras authored
Commit 68ad28a4 ("KVM: PPC: Book3S HV: Fix radix guest SLB side channel") changed the older guest entry path, with the side effect that vcpu->arch.slb_max no longer gets cleared for a radix guest. This means that a HPT guest which loads some SLB entries, switches to radix mode, runs the guest using the old guest entry path (e.g., because the indep_threads_mode module parameter has been set to false), and then switches back to HPT mode would now see the old SLB entries being present, whereas previously it would have seen no SLB entries. To avoid changing guest-visible behaviour, this adds a store instruction to clear vcpu->arch.slb_max for a radix guest using the old guest entry path. Signed-off-by:
-
- 10 Feb, 2021 11 commits
-
-
Fabiano Rosas authored
These machines don't support running both MMU types at the same time, so remove the KVM_CAP_PPC_MMU_HASH_V3 capability when the host is using Radix MMU. [paulus@ozlabs.org - added defensive check on kvmppc_hv_ops->hash_v3_possible] Signed-off-by:
Fabiano Rosas <farosas@linux.ibm.com> Signed-off-by:
-
Fabiano Rosas authored
The Facility Status and Control Register is a privileged SPR that defines the availability of some features in problem state. Since it can be written by the guest, we must restore it to the previous host value after guest exit. This restoration is currently done by taking the value from current->thread.fscr, which in the P9 path is not enough anymore because the guest could context switch the QEMU thread, causing the guest-current value to be saved into the thread struct. The above situation manifested when running a QEMU linked against a libc with System Call Vectored support, which causes scv instructions to be run by QEMU early during the guest boot (during SLOF), at which point the FSCR is 0 due to guest entry. After a few scv calls (1 to a couple hundred), the context switching happens and the QEMU thread runs with the guest value, resulting in a Facility Unavailable interrupt. This patch saves and restores the host value of FSCR in the inner guest entry loop in a way independent of current->thread.fscr. The old way of doing it is still kept in place because it works for the old entry path. Signed-off-by:
-
Yang Li authored
Eliminate the following coccicheck warning: ./arch/powerpc/kvm/booke.c:701:2-3: Unneeded semicolon Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Signed-off-by:
Yang Li <yang.lee@linux.alibaba.com> Signed-off-by:
-
Nicholas Piggin authored
IH=6 may preserve hypervisor real-mode ERAT entries and is the recommended SLBIA hint for switching partitions. Signed-off-by:
-
Nicholas Piggin authored
Signed-off-by:
-
Nicholas Piggin authored
The slbmte instruction is legal in radix mode, including radix guest mode. This means radix guests can load the SLB with arbitrary data. KVM host does not clear the SLB when exiting a guest if it was a radix guest, which would allow a rogue radix guest to use the SLB as a side channel to communicate with other guests. Fix this by ensuring the SLB is cleared when coming out of a radix guest. Only the first 4 entries are a concern, because radix guests always run with LPCR[UPRT]=1, which limits the reach of slbmte. slbia is not used (except in a non-performance-critical path) because it can clear cached translations. Signed-off-by:
-
Nicholas Piggin authored
This reverts much of commit c0101509 ("KVM: PPC: Book3S HV: Run HPT guests on POWER9 radix hosts"), which was required to run HPT guests on RPT hosts on early POWER9 CPUs without support for "mixed mode", which meant the host could not run with MMU on while guests were running. This code has some corner case bugs, e.g., when the guest hits a machine check or HMI the primary locks up waiting for secondaries to switch LPCR to host, which they never do. This could all be fixed in software, but most CPUs in production have mixed mode support, and those that don't are believed to be all in installations that don't use this capability. So simplify things and remove support. Signed-off-by:
-
Ravi Bangoria authored
Introduce KVM_CAP_PPC_DAWR1 which can be used by QEMU to query whether KVM supports 2nd DAWR or not. The capability is by default disabled even when the underlying CPU supports 2nd DAWR. QEMU needs to check and enable it manually to use the feature. Signed-off-by:
Ravi Bangoria <ravi.bangoria@linux.ibm.com> Signed-off-by:
-
Ravi Bangoria authored
KVM code assumes single DAWR everywhere. Add code to support 2nd DAWR. DAWR is a hypervisor resource and thus H_SET_MODE hcall is used to set/ unset it. Introduce new case H_SET_MODE_RESOURCE_SET_DAWR1 for 2nd DAWR. Also, KVM will support 2nd DAWR only if CPU_FTR_DAWR1 is set. Signed-off-by:
-
Ravi Bangoria authored
Power10 is introducing a second DAWR (Data Address Watchpoint Register). Use real register names (with suffix 0) from ISA for current macros and variables used by kvm. One exception is KVM_REG_PPC_DAWR. Keep it as it is because it's uapi so changing it will break userspace. Signed-off-by:
-
Ravi Bangoria authored
On powerpc, L1 hypervisor takes help of L0 using H_ENTER_NESTED hcall to load L2 guest state in cpu. L1 hypervisor prepares the L2 state in struct hv_guest_state and passes a pointer to it via hcall. Using that pointer, L0 reads/writes that state directly from/to L1 memory. Thus L0 must be aware of hv_guest_state layout of L1. Currently it uses version field to achieve this. i.e. If L0 hv_guest_state.version != L1 hv_guest_state.version, L0 won't allow nested kvm guest. This restriction can be loosened up a bit. L0 can be taught to understand older layout of hv_guest_state, if we restrict the new members to be added only at the end, i.e. we can allow nested guest even when L0 hv_guest_state.version > L1 hv_guest_state.version. Though, the other way around is not possible. Signed-off-by:
-
- 09 Feb, 2021 4 commits
-
-
Paolo Bonzini authored
Documentation/virt/kvm/api.rst:4927: WARNING: Title underline too short. 4.130 KVM_XEN_VCPU_GET_ATTR -------------------------- Fixes: e1f68169 ("KVM: Add documentation for Xen hypercall and shared_info updates") Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
-
David Woodhouse authored
In order to support Xen SHUTDOWN_soft_reset (for guest kexec, etc.) the VMM needs to be able to tear everything down and return the Xen features to a clean slate. Signed-off-by:
-
Maciej S. Szmigiero authored
When retpolines are enabled they have high overhead in the inner loop inside kvm_handle_hva_range() that iterates over the provided memory area. Let's mark this function and its TDP MMU equivalent __always_inline so compiler will be able to change the call to the actual handler function inside each of them into a direct one. This significantly improves performance on the unmap test on the existing kernel memslot code (tested on a Xeon 8167M machine): 30 slots in use: Test Before After Improvement Unmap 0.0353s 0.0334s 5% Unmap 2M 0.00104s 0.000407s 61% 509 slots in use: Test Before After Improvement Unmap 0.0742s 0.0740s None Unmap 2M 0.00221s 0.00159s 28% Looks like having an indirect call in these functions (and, so, a retpoline) might have interfered with unrolling of the whole loop in the CPU. Signed-off-by:
Maciej S. Szmigiero <maciej.szmigiero@oracle.com> Message-Id: <732d3fe9eb68aa08402a638ab0309199fa89ae56.1612810129.git.maciej.szmigiero@oracle.com> Signed-off-by:
-
Vitaly Kuznetsov authored
hv_vcpu_to_vcpu() helper is only used by other helpers and is not very complex, we can drop it without much regret. Signed-off-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Message-Id: <20210126134816.1880136-16-vkuznets@redhat.com> Signed-off-by:
-
