- 22 Jun, 2009 7 commits
-
-
Dave Jones authored
When a packet is greater than ETH_ZLEN, we end up assigning the boolean result of a comparison to the size we unmap. Signed-off-by:
Dave Jones <davej@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Yevgeny Petrilin authored
Our RX rings are always full, there is no need to check whether we need to fill them or not. If we fail to allocate a new socket buffer, the incoming packet is dropped an the ring remains full. Signed-off-by:
Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by:
-
Yevgeny Petrilin authored
This check that verifies that the LSO header along with control segment and first data segment do not cross 128 bytes is no longer required. Signed-off-by:
-
Yevgeny Petrilin authored
When closing the port, we stop all transmit queues under the transmit lock. It ensures that we will not attempt to transmit new packets after the physical port was closed. Signed-off-by:
-
Yevgeny Petrilin authored
After we moved to be a multi queue device, need to stop/start all of our transmit queues. Signed-off-by:
-
Yevgeny Petrilin authored
We don't need this check in the transmit function Signed-off-by:
-
Yevgeny Petrilin authored
Reporting the counter's value through 'ethtool -S' Signed-off-by:
-
- 20 Jun, 2009 5 commits
-
-
David Brownell authored
The host-side CDC subset driver is binding more specifically than it should ... only to PXA 210/25x/26x Linux-USB gadgets. Loosen that restriction to match the gadget driver driver. This will various PXA 27x and PXA 3xx devices happier when talking to Linux hosts, potentially others. Signed-off-by:
David Brownell <dbrownell@users.sourceforge.net> Tested-by:
Aric D. Blumer <aric@sdgsystems.com> Signed-off-by:
-
Jiri Slaby authored
We cannot sleep in ql_reset_work under spinlock, unlock before sleep, relock after. Signed-off-by:
Jiri Slaby <jirislaby@gmail.com> Signed-off-by:
-
-
Neil Horman authored
Don't drop route if we're not caching I recently got a report of an oops on a route lookup. Maxime was testing what would happen if route caching was turned off (doing so by setting making rt_caching always return 0), and found that it triggered an oops. I looked at it and found that the problem stemmed from the fact that the route lookup routines were returning success from their lookup paths (which is good), but never set the **rp pointer to anything (which is bad). This happens because in rt_intern_hash, if rt_caching returns false, we call rt_drop and return 0. This almost emulates slient success. What we should be doing is assigning *rp = rt and _not_ dropping the route. This way, during slow path lookups, when we create a new route cache entry, we don't immediately discard it, rather we just don't add it into the cache hash table, but we let this one lookup use it for the purpose of this route request. Maxime has tested and reports it prevents the oops. There is still a subsequent routing issue that I'm looking into further, but I'm confident that, even if its related to this same path, this patch makes sense to take. Signed-off-by:
Neil Horman <nhorman@tuxdriver.com> Signed-off-by:
-
Tilman Schmidt authored
Remove duplicates, a stray merge conflict marker, and an entry for a file which doesn't exist, and move one entry to its correct alphabetical place. Signed-off-by:
Tilman Schmidt <tilman@imap.cc> Signed-off-by:
-
- 19 Jun, 2009 28 commits
-
-
Johannes Berg authored
When I disallowed interfering with stations on non-AP interfaces, I not only forget mesh but also managed interfaces which need this for the authorized flag. Let's actually validate everything properly. This fixes an nl80211 regression introduced by the interfering, under which wpa_supplicant -Dnl80211 could not properly connect. Signed-off-by:
Johannes Berg <johannes@sipsolutions.net> Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
Andrey Yurovsky authored
Mesh Point interfaces can also set parameters, for example plink_open is used to manually establish peer links from user-space (currently via iw). Add Mesh Point to the check in nl80211_set_station. Signed-off-by:
Andrey Yurovsky <andrey@cozybit.com> Signed-off-by:
-
Andrey Yurovsky authored
Commit b2a151a288 added a check that prevents adding or deleting stations on non-AP interfaces. Adding and deleting stations is supported for Mesh Point interfaces, so add Mesh Point to that check as well. Signed-off-by:
-
Jiri Slaby authored
73ca5203 (ath5k: remove conf->beacon_int usage) removed bintval setting from ath5k_config. We need to init the interval earlier and don't touch it in add_interface anymore. Otherwise it will be set only once by upper layer through bss_info_changed but not on second and further hostap executions. We ended up having bintval 1000 which rendered the AP useless on many clients. Signed-off-by:
-
Joe Perches authored
Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Gabor Juhos authored
We want to put the chip into FULL SLEEP state, when we are disabling the radio, but the the current code always change it to AWAKE/NETWORK SLEEP. Changes-licensed-under: ISC Signed-off-by:
Gabor Juhos <juhosg@openwrt.org> Signed-off-by:
-
Gabor Juhos authored
Changes-licensed-under: ISC Signed-off-by:
-
Troy Moure authored
"rfkill: rewrite" incorrectly reversed the meaning of 'state' in acer_rfkill_update() when it changed rfkill_force_state() to rfkill_set_sw_state(). Fix it. Signed-off-by:
Troy Moure <twmoure@szypr.net> Signed-off-by:
-
Jouni Malinen authored
This reverts 'ath5k: remove dummy PCI "retry timeout" fix' on the same theory as in 'ath9k: Fix PCI FATAL interrupts by restoring RETRY_TIMEOUT disabling'. Reported-by:
Bob Copeland <me@bobcopeland.com> Cc: stable@kernel.org Signed-off-by:
-
Alan Jenkins authored
This information allows userspace to implement a hybrid policy where it can store the rfkill soft-blocked state in platform non-volatile storage if available, and if not then file-based storage can be used. Some users prefer platform non-volatile storage because of the behaviour when dual-booting multiple versions of Linux, or if the rfkill setting is changed in the BIOS setting screens, or if the BIOS responds to wireless-toggle hotkeys itself before the relevant platform driver has been loaded. Signed-off-by:
Alan Jenkins <alan-jenkins@tuffmail.co.uk> Acked-by:
Henrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by:
-
Alan Jenkins authored
This will respect state changes over hibernation, e.g. if the user disables the wireless in the BIOS setup screen. It reveals an issue where ACPI silently kills the wireless on suspend. Normally, the BIOS restores the correct state from non-volatile storage on boot. But when hibernation is aborted, the wireless would remain killed. Fortunately we can work around this in the resume handler by simply writing back the same value we read from NVS. Signed-off-by:
-
Alan Jenkins authored
The setting of the "persistent" flag is also made more explicit using a new rfkill_init_sw_state() function, instead of special-casing rfkill_set_sw_state() when it is called before registration. Suspend is a bit of a corner case so we try to get away without adding another hack to rfkill-input - it's going to be removed soon. If the state does change over suspend, users will simply have to prod rfkill-input twice in order to toggle the state. Userspace policy agents will be able to implement a more consistent user experience. For example, they can avoid the above problem if they toggle devices individually. Then there would be no "global state" to get out of sync. Currently there are only two rfkill drivers with persistent soft-blocked state. thinkpad-acpi already checks the software state on resume. eeepc-laptop will require modification. Signed-off-by:
-
Alan Jenkins authored
If we return after fiddling with the state, userspace will see the wrong state and rfkill_set_sw_state() won't work until the next call to rfkill_set_block(). At the moment rfkill_set_block() will always be called from rfkill_resume(), but this will change in future. Also, presumably the point of this test is to avoid bothering devices which may be suspended. If we don't want to call set_block(), we probably don't want to call query() either :-). Signed-off-by:
-
Jouni Malinen authored
An earlier commit, 'ath9k: remove dummy PCI "retry timeout" fix', removed code that was documented to disable RETRY_TIMEOUT register (PCI reg 0x41) since it was claimed to be a no-op. However, it turns out that there are some combinations of hosts and ath9k-supported cards for which this is not a no-op (reg 0x41 has value 0x80, not 0) and this code (or something similar) is needed. In such cases, the driver may be next to unusable due to very frequent PCI FATAL interrupts from the card. Reverting the earlier commit, i.e., restoring the RETRY_TIMEOUT disabling, seems to resolve the issue. Since the removal of this code was not based on any known issue and was purely a cleanup change, the safest option here is to just revert that commit. Should there be desire to clean this up in the future, the change will need to be tested with a more complete coverage of cards and host systems. http://bugzilla.kernel.org/show_bug.cgi?id=13483 Cc: stable@kernel.org Signed-off-by:
Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by:
-
Hin-Tak Leung authored
Hans Pontar reported success on the sourceforge zd1211-devs mailing list. The device is branded "Arcor Easy Stick A 50 WLAN" (device manufactured by SMC for a German ISP - SMC model name: WN4501H-LF-IR). General information and Windows driver are available under (German only): http://www.arcor.de/hilfe/neu/index.php?sid=&aktion=anzeigen&rubrik=004018140&id=487 Device details: USB-IDs: Vendor: 0x083A Device: 0xE503 Chip ID: zd1211b chip 083a:e503 v4810 high 00-1d-19 AL2230S_RF pa0 g--N- Signed-off-by:
Hin-Tak Leung <htl10@users.sourceforge.net> Tested-by:
Hans Pontar <pontar@gmx.de> Signed-off-by:
-
Zhu Yi authored
The patch adds a mutex to protect the iwm_reset_worker against netdev ndo_open and ndo_stop because all of them call iwm_up and iwm_down in the implementation. Note the latter two are already protected by rtnl. So if iwm_reset_worker is not required in the future, the mutex can also be removed. Signed-off-by:
Zhu Yi <yi.zhu@intel.com> Signed-off-by:
Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by:
-
Zhu Yi authored
The iwm_if_free() is called before destroy_workqueue for isr_wq on device remove method. But if there is still some pending work in the isr_wq, the required data structures are already freed at this point. This leeds a kernel oops. The patch fixes this problem by moving iwm_if_free after destroy_workqueue. Signed-off-by:
-
Zhu Yi authored
We used to do alloc_netdev and register_netdev at the same time in iwm_if_alloc. But some bus related structures will only be initialized after iwm_priv is allocated. This caused a race condition that the netdev might be registered earlier. The patch adds iwm_if_add and iwm_if_remove so that the bus layer could register the device after all initialization is done. Signed-off-by:
-
Zhu Yi authored
We need to check for iwm_priv_init() errors and do proper cleanups. Otherwise we may fail to catch the create_singlethread_workqueue() error which will cause a kernel oops when destroy_workqueue() later. Signed-off-by:
-
Prabhanjan Sarnaik authored
The Unicast Promiscious Mode (UPM) bit in the mv643xx_eth port configuration register doesn't do exactly what its name would suggest: setting this bit merely enables reception of all unicast frames with a destination address that differs from our local MAC address in bits [47:4]. In particular, it doesn't have any effect on unicast frames with a destination address that matches our MAC address in bits [47:4] -- these will still be tested against the 16-entry unicast address filter table. Therefore, if the interface is set to promiscuous mode, just setting the unicast promiscuous bit isn't enough -- we need to set all filter bits in the unicast filter table to 1 as well. Reported-by:
Sachin Sanap <ssanap@marvell.com> Signed-off-by:
Prabhanjan Sarnaik <sarnaik@marvell.com> Tested-by:
Siddarth Gore <gores@marvell.com> Tested-by:
Mahavir Jain <mjain@marvell.com> Signed-off-by:
Lennert Buytenhek <buytenh@marvell.com> Cc: stable@kernel.org Signed-off-by:
-
Florian Westphal authored
all references got removed by 865c652d (r8169: remove non-napi code). Signed-off-by:
Florian Westphal <fwestphal@astaro.com> Signed-off-by:
-
Andy Gospodarek authored
The last hunk of this commit: commit 12d04a3c Author: Alexander Duyck <alexander.h.duyck@intel.com> Date: Wed Mar 25 22:05:03 2009 +0000 e1000e: commonize tx cleanup routine to match e1000 & igb changed the logic for determining if we should call napi_complete or not at then end of a napi poll. If the NIC is using MSI-X with no work to do in ->poll, net_rx_action can just spin indefinitely on older kernels and for 2 jiffies on newer kernels since napi_complete is never called and budget isn't decremented. Discovered and verified while testing driver backport to an older kernel. Signed-off-by:Andy Gospodarek <andy@greyhouse.net> Acked-by:
Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by:
-
Jonas Sjöquist authored
This patch adds five PID's to the whitelist set of devices. Devices added to the whitelist: Dell Wireless 5530 HSPA Ericsson Mobile Broadband Module variants (F3507g, F3607gw and F3307) Toshiba F3507g Signed-off-by:
Jonas Sjöquist <jonas.sjoquist@ericsson.com> Signed-off-by:
-
Dmitry Baryshkov authored
IEEE 802.15.4 git tree was moved from my private area to shared one. Fix address accordingly. Signed-off-by:
Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by:
-
Dmitry Baryshkov authored
Use print_hex_dump_bytes instead of self-written dumping function for outputting packet dumps. Signed-off-by:
-
Sathya Perla authored
Rcv and process ansync link status notifications from BE instead of polling for link status in the be_worker thread. Signed-off-by:
Sathya Perla <sathyap@serverengines.com> Signed-off-by:
-
Sathya Perla authored
Cleanup multicast_set method to avoid an extra copy of mc_list and unwanted promiscuos sets to BE. Signed-off-by:
-
Sathya Perla authored
Currenlty multicast_set and promiscuous_config cmds -- that may be called in BH context -- use the blocking MCC mbox to post cmds. An mbox cmd is protected via a spin_lock(cmd_lock) and not spin_lock_bh() as it is undesirable to disable BHs while a blocking mbox cmd is in progress (and take long to finish.) This can lockup a cmd in progress in process context. So, these two cmds in BH context must use the MCC queue to post cmds. Signed-off-by:
-
