For errors that don't preclude checking for further errors, aka "soft"
errors, just  continue testing for other errors.

Better coverage in verbose mode.
Suggested-by: David Ahern <dsahern@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-jafcokbj26m845dsgm2hx6az@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

This new test will validate these new routines extracted from 'perf
record':

 - perf_evlist__config_attrs
 - perf_evlist__prepare_workload
 - perf_evlist__start_workload

In addition to several other perf_evlist methods.

It consists of starting a simple workload, setting up just one event to
monitor ("cycles") requesting that several PERF_SAMPLE_ fields be
present in all events.

It then will check that the expected PERF_RECORD_ events are produced
and will sanity check all its fields.

Some checks performed:

. PERF_SAMPLE_TIME monotonically increases.

. PERF_SAMPLE_CPU is the one requested with sched_setaffinity

. PERF_SAMPLE_TID and PERF_SAMPLE_PID matches the one we forked
  in perf_evlist__prepare_workload and that is stored in
  evlist->workload.pid

. For the events where these fields are also present in its
  pre-sample_id_all fields (e.g. event->mmap.pid), that they are what
  is expected too.

. That we get a bunch of mmaps:

  PATH/libcSUFFIX
  PATH/ldSUFFIX
  [vdso]
  PATH/sleep

Example:

  [root@emilia ~]# taskset -c 3,4 perf test -v1 perf_sample
   6: Validate PERF_RECORD_* events & perf_sample fields:
  --- start ---
  7159480799825 3 PERF_RECORD_SAMPLE
  7159480805584 3 PERF_RECORD_SAMPLE
  7159480807814 3 PERF_RECORD_SAMPLE
  7159480810430 3 PERF_RECORD_SAMPLE
  7159480861511 3 PERF_RECORD_MMAP 8086/8086: [0x7fffffffd000(0x2000) @ 0x7fffffffd000]: //anon
  7159481052516 3 PERF_RECORD_COMM: sleep:8086
  7159481070188 3 PERF_RECORD_MMAP 8086/8086: [0x400000(0x6000) @ 0]: /bin/sleep
  7159481077104 3 PERF_RECORD_MMAP 8086/8086: [0x3d06400000(0x221000) @ 0]: /lib64/ld-2.12.so
  7159481092912 3 PERF_RECORD_MMAP 8086/8086: [0x7fff1adff000(0x1000) @ 0x7fff1adff000]: [vdso]
  7159481196779 3 PERF_RECORD_MMAP 8086/8086: [0x3d06800000(0x37f000) @ 0]: /lib64/libc-2.12.so
  7160481558435 3 PERF_RECORD_EXIT(8086:8086):(8086:8086)
  ---- end ----
  Validate PERF_RECORD_* events & perf_sample fields: Ok
  [root@emilia ~]#

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-svag18v2z4idas0dyz3umjpq@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

So that tools like 'perf test' can print the events when in verbose
mode, for instance.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-xnovdqfi25nc48gy6604k7yp@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

To obtain a list of available tests:

[root@emilia linux]# perf test list
 1: vmlinux symtab matches kallsyms
 2: detect open syscall event
 3: detect open syscall event on all cpus
 4: read samples using the mmap interface
 5: parse events tests
[root@emilia linux]#

To list just a subset:

[root@emilia linux]# perf test list syscall
 2: detect open syscall event
 3: detect open syscall event on all cpus
[root@emilia linux]#

To run a subset:

[root@emilia linux]# perf test detect
 2: detect open syscall event: Ok
 3: detect open syscall event on all cpus: Ok
[root@emilia linux]#

Specific tests can be chosen by number:

[root@emilia linux]# perf test 1 3 parse
 1: vmlinux symtab matches kallsyms: Ok
 3: detect open syscall event on all cpus: Ok
 5: parse events tests: Ok
[root@emilia linux]#

Now to write more tests!
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-nqec2145qfxdgimux28aw7v8@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

At first tools were required to do that, but while writing the python
bindings to simplify the API I made them auto-allocate when needed.

This just makes record, stat and top use that auto allocation,
simplifying them a bit.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-iokhcvkzzijr3keioubx8hlq@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Since we already ask for PERF_SAMPLE_ID and use it to quickly find the
associated evsel, add handler func + data to struct perf_evsel to avoid
using chains of if(strcmp(event_name)) and also to avoid all the linear
list searches via trace_event_find.

To demonstrate the technique convert 'perf sched' to it:

 # perf sched record sleep 5m

And then:

 Performance counter stats for '/tmp/oldperf sched lat':

        646.929438 task-clock                #    0.999 CPUs utilized
                 9 context-switches          #    0.000 M/sec
                 0 CPU-migrations            #    0.000 M/sec
            20,901 page-faults               #    0.032 M/sec
     1,290,144,450 cycles                    #    1.994 GHz
   <not supported> stalled-cycles-frontend
   <not supported> stalled-cycles-backend
     1,606,158,439 instructions              #    1.24  insns per cycle
       339,088,395 branches                  #  524.151 M/sec
         4,550,735 branch-misses             #    1.34% of all branches

       0.647524759 seconds time elapsed

Versus:

 Performance counter stats for 'perf sched lat':

        473.564691 task-clock                #    0.999 CPUs utilized
                 9 context-switches          #    0.000 M/sec
                 0 CPU-migrations            #    0.000 M/sec
            20,903 page-faults               #    0.044 M/sec
       944,367,984 cycles                    #    1.994 GHz
   <not supported> stalled-cycles-frontend
   <not supported> stalled-cycles-backend
     1,442,385,571 instructions              #    1.53  insns per cycle
       308,383,106 branches                  #  651.195 M/sec
         4,481,784 branch-misses             #    1.45% of all branches

       0.474215751 seconds time elapsed

[root@emilia ~]#

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-1kbzpl74lwi6lavpqke2u2p3@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Allows collecting events system wide and then pulling out events for a
specific task name(s). e.g,

    perf script -c gnome-shell,gnome-terminal

Applies on top of:
    https://lkml.org/lkml/2011/11/13/74

v2->v3
- update Documentation

v1->v2
- use comm_list from symbol_conf

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1321894972-24246-1-git-send-email-dsahern@gmail.comSigned-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Currently the meaning of -C varies by perf command: for perf-top,
perf-stat, perf-record it means cpu list. For perf-report it means comm
list. Then perf-annotate, perf-report and perf-script use -c for cpu
list.

Fix annotate, report and script to use -C for cpu list to be consistent
with top, stat and record. This means report needs to use -c for comm
list which does introduce a backward compatibility change.

v1 -> v2
- update perf-script.txt too

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1321209008-7004-1-git-send-email-dsahern@gmail.comSigned-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Use its 'perf_tool' base class instead.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-i33q40wwvk2zna8fd36ex6sm@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

To better reflect that it became the base class for all tools, that must
be in each tool struct and where common stuff will be put.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-qgpc4msetqlwr8y2k7537cxe@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Reducing the exposure of perf_session further, so that we can use the
classes in cases where no perf.data file is created.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-stua66dcscsezzrcdugvbmvd@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

So that we don't need to have that many globals.

Next steps will remove the 'session' pointer, that in most cases is
not needed.

Then we can rename perf_event_ops to 'perf_tool' that better describes
this class hierarchy.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-wp4djox7x6w1i2bab1pt4xxp@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Paving the way to remove these globals when we change the perf_event_ops
to receive as a first parameter a pointer to a perf_event_ops that will
then provide access to perf_annotate via container_of.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-xduzibqrdg3h5cttmk6p5wwc@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Paving the way to remove these globals when we change the perf_event_ops
to receive as a first parameter a pointer to a perf_event_ops that will
then provide access to perf_report via container_of.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-2eh2vi2nb5z3tg1lvoxv09xu@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Eventually session->sample_type will go away as we want to support
multiple sample types per session, so use it from the evsel which is a
step in that direction.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-0vwdpjcwbjezw459lw5n3ew1@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Since we have it in evsel->hists.callchain_cursor, remove it from
perf_session.

One more step in disentangling several places from requiring a
perf_session pointer.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-rxr5dj3di7ckyfmnz0naku1z@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Removing another case where a perf_session is required when processing
events.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-ug1wtjbnva4bxwknflkkrlrh@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

We will need this when not using perf_session in cases like 'perf top'
and strace where no perf.data file is created nor consumed.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-za923wjc41q5xot5vrhuhj3j@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Since symbol__alloc_hists need it, to avoid passing it around in many
functions have it in the symbol_conf struct.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-cwv8ysvpywzjq4v3xtbd4zwv@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Happens in a perf.data file where one of the events had no samples.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-j7st3oyiotvfxqde2nc41kxb@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Will be used in other tools to share the command line parsing code.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-8x0yr77r6lrd2t699s499m8n@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The 'machine' abstraction was introduced with 'perf kvm' where we could
have samples for the host and multiple guests, but at the time we ended
up keeping the list of all machines threads all in
session->host_machine.

Move the threads rb_tree to struct machine to separate the namespaces.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-mdg7sm6j3va09vtgj49gbsrp@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Tools being developed will need this to allow the user to override this
value.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-zydc1yhxfm0z35fuy95bsn1l@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Every tool that calls this and allows the user to override the value
needs this logic.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-lwscxpg57xfzahz5dmdfp9uz@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

So that we can easily start a workload in other tools.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-zdsksd4aphu0nltg2lpwsw3x@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Out of the code in 'perf record', so that we can share option parsing,
etc. Eventually will be used by 'perf top', but first 'trace' will use
it.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-hzjqsgnte1esk90ytq0ap98v@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Convenient way of asking for tracepoint events to be added to an
existing evlist.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-0ylj4wrg54791u0baqb9swbb@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Replacing the open coded equivalents in 'perf stat'.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-1btwadnf2tds2g07hsccsdse@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

We don't need to have two PATH_MAX char sized arrays holding it, just
one in util/debugfs.c will do.

Also rename debugfs_path to tracing_events_path, as it is not the path
to debugfs, that is debugfs_mountpoint. Both are now accessible.

This will allow accessing this code in the perf python binding without
having to drag in perf.c and util/parse-events.c.

The defaults for these variables are the canonical "/sys/kernel/debug"
and "/sys/kernel/debug/tracing/events/", removing the need for simple
tools to call debugfs_mount(NULL).

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-ug9jvtjrsqbluuhqqxpvg30f@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

No need for multiple definitions for STR() and die(), also use SuSv2's
PATH_MAX instead of adding MAX_PATH.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-qpujjkw7u0bf0tr4wt55cr9y@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

This patch solves the following problem:

Now some samples may be lost due to throttling. The number of samples is
restricted by sysctl_perf_event_sample_rate/HZ.  A trace event is
divided on some samples according to event's period.  I don't sure, that
we should generate more than one sample on each trace event. I think the
better way to use SAMPLE_PERIOD.

E.g.: I want to trace when a process sleeps. I created a process, which
sleeps for 1ms and for 4ms.  perf got 100 events in both cases.

swapper     0 [000]  1141.371830: sched_stat_sleep: comm=foo pid=1801 delay=1386750 [ns]
swapper     0 [000]  1141.369444: sched_stat_sleep: comm=foo pid=1801 delay=4499585 [ns]

In the first case a kernel want to send 4499585 events and
in the second case it wants to send 1386750 events.
perf-reports shows that process sleeps in both places equal time. It's
bug.

With this patch kernel generates one event on each "sleep" and the time
slice is saved in the field "period". Perf knows how handle it.
Signed-off-by: Andrew Vagin <avagin@openvz.org>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1320670457-2633428-3-git-send-email-avagin@openvz.orgSigned-off-by: Ingo Molnar <mingo@elte.hu>

Split the callchain code from the perf events core into
a new kernel/events/callchain.c file.

This simplifies a bit the big core.c
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
[keep ctx recursion handling inline and use internal headers]
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1318778104-17152-1-git-send-email-fweisbec@gmail.comSigned-off-by: Ingo Molnar <mingo@elte.hu>

Merge branch 'tip/perf/core' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace into perf/core

Add a sanity test of x86 insn decoder against a stream
of randomly generated input, at build time.

This test is also able to reproduce any bug that might
trigger by allowing the passing of random-seed and
iteration-number to the test, or by passing input
which has invalid byte code.

Changes in V2:
 - Code cleanup.
 - Show how to reproduce the error by insn_sanity test.
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: acme@redhat.com
Cc: ming.m.lin@intel.com
Cc: robert.richter@amd.com
Cc: ravitillo@lbl.gov
Cc: yrl.pp-manager.tt@hitachi.com
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20111020140109.20938.92572.stgit@localhost.localdomainSigned-off-by: Ingo Molnar <mingo@elte.hu>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux:
  drivers/media: video/a5k6aa is a module and so needs module.h
  mfd: fix build failures in recently added ab5500 code
  hwspinlock/u8500: include linux/module.h
  MTD: MAPS: bcm963xx-flash.c: explicitly include module.h

* 'for-linus' of git://neil.brown.name/md:
  md/raid5: STRIPE_ACTIVE has lock semantics, add barriers
  md/raid5: abort any pending parity operations when array fails.

* 'docs-move' of git://git.kernel.org/pub/scm/linux/kernel/git/rdunlap/linux-docs: (45 commits)
  DocBook/drm: Clean up a todo-note
  DocBook/drm: `device aware' -> `device-aware'
  DocBook/drm: `(device|driver) specific' -> `(device|driver)-specific'
  DocBook/drm: Clean up the paragraph on framebuffer objects
  DocBook/drm: Use `; otherwise,'
  DocBook/drm: Better flow with `, and then'
  DocBook/drm: Refer to the domain-setting function as a device-specific ioctl
  DocBook/drm: Improve flow of GPU/CPU coherence sentence
  DocBook/drm: Use an <itemizelist> for fundamental GEM operations
  DocBook/drm: Insert a comma
  DocBook/drm: Use a <variablelist> for vblank ioctls
  DocBook/drm: Use an itemizedlist for what an encoder needs to provide
  DocBook/drm: Insert `the' for readability, and change `set' to `setting'
  DocBook/drm: Remove extraneous commas
  DocBook/drm: Use a colon
  DocBook/drm: Clarify `final initialization' via better formatting
  DocBook/drm: Remove redundancy
  DocBook/drm: Insert `it' for smooth reading
  DocBook/drm: The word `so-called'; I do not think it connotes what you think it connotes
  DocBook/drm: Use a singular subject for grammatical cleanliness
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest: (21 commits)
  ktest: Evaluate variables entered on the command line
  ktest: Add variable ${PWD}
  ktest: Add another monitor flush before installing kernel
  ktest: Do not opencode reboot in grub setting
  ktest: Add processing of complex conditionals
  ktest: Fix parsing of config section lines
  ktest: Sort make_min_config configs by dependecies
  ktest: Add DEFINED keyword for IF statements
  ktest: Add OVERRIDE keyword to DEFAULTS section
  ktest: Consolidate TEST_TYPE and DEFAULT code
  ktest: Add INCLUDE keyword to include other config files
  ktest: Let IF keyword take comparisons
  ktest: Add IF and ELSE to config sections
  ktest: Do not reboot on config or build issues
  ktest: Add option REBOOT_SUCCESS_LINE to stop waiting after a reboot
  ktest: Add NO_INSTALL option to not install for a test
  ktest: Fail when grub menu not found
  ktest: Include monitor in reboot code
  ktest: Only need to save .config when doing mrproper
  ktest: Create outputdir if it does not exist
  ...

* 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  PM / OPP: Use ERR_CAST instead of ERR_PTR(PTR_ERR())
  PM / devfreq: fix private_data
  Documentation: Fix typo in freezer-subsystem.txt
  PM / QoS: Set cpu_dma_pm_qos->name