- 27 Sep, 2013 32 commits
-
-
Marek Vasut authored
commit 2a961d09 upstream. The removed check in the read_raw implementation was always true, therefore remove it. This also fixes a bug, by closely inspecting the code, one can notice the iio_validate_scan_mask_onehot() will always return 1 and therefore the subsequent condition will always succeed, therefore making the mxs_lradc_read_raw() function always return -EINVAL; . Signed-off-by:
Marek Vasut <marex@denx.de> Tested-by:
Otavio Salvador <otavio@ossystems.com.br> Acked-by:
Hector Palacios <hector.palacios@digi.com> Signed-off-by:
Jonathan Cameron <jic23@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Marek Vasut authored
commit e1b1fa66 upstream. The struct iio_dev .trig field is to be used only by the IIO core, the driver shall not fill this field. This fixes ugly crash when the driver is compiled as a module and the module is rmmod'd. Signed-off-by:
-
Dan Carpenter authored
commit 2c4283ca upstream. In dt282x_ai_insn_read() we call this macro like: wait_for(!mux_busy(), comedi_error(dev, "timeout\n"); return -ETIME;); Because the if statement doesn't have curly braces it means we always return -ETIME and the function never succeeds. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
-
Andy Lutomirski authored
commit d661684c upstream. This is a security bug. The follow-up will fix nsproxy to discourage this type of issue from happening again. Signed-off-by:
Andy Lutomirski <luto@amacapital.net> Reviewed-by:
"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Alan Stern authored
commit 69820e01 upstream. Since ohci-hcd supports runtime PM, the .pm field in its pci_driver structure should be protected by CONFIG_PM rather than CONFIG_PM_SLEEP. Without this change, OHCI controllers won't do runtime suspend if system suspend or hibernation isn't enabled. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
Pavel Shilovsky authored
commit 933d4b36 upstream. If a server sends a lease break to a connection that doesn't have opens with a lease key specified in the server response, we can't find an open file to send an ack. Fix this by walking through all connections we have. Signed-off-by:
Pavel Shilovsky <pshilovsky@samba.org> Signed-off-by:
Steve French <smfrench@gmail.com> Signed-off-by:
-
Pavel Shilovsky authored
commit 1a05096d upstream. This happens when we receive a lease break from a server, then find an appropriate lease key in opened files and schedule the oplock_break slow work. lw pointer isn't freed in this case. Signed-off-by:
-
Jeff Layton authored
commit 73e216a8 upstream. Oleksii reported that he had seen an oops similar to this: BUG: unable to handle kernel NULL pointer dereference at 0000000000000088 IP: [<ffffffff814dcc13>] sock_sendmsg+0x93/0xd0 PGD 0 Oops: 0000 [#1] PREEMPT SMP Modules linked in: ipt_MASQUERADE xt_REDIRECT xt_tcpudp iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack ip_tables x_tables carl9170 ath usb_storage f2fs nfnetlink_log nfnetlink md4 cifs dns_resolver hid_generic usbhid hid af_packet uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_core videodev rfcomm btusb bnep bluetooth qmi_wwan qcserial cdc_wdm usb_wwan usbnet usbserial mii snd_hda_codec_hdmi snd_hda_codec_realtek iwldvm mac80211 coretemp intel_powerclamp kvm_intel kvm iwlwifi snd_hda_intel cfg80211 snd_hda_codec xhci_hcd e1000e ehci_pci snd_hwdep sdhci_pci snd_pcm ehci_hcd microcode psmouse sdhci thinkpad_acpi mmc_core i2c_i801 pcspkr usbcore hwmon snd_timer snd_page_alloc snd ptp rfkill pps_core soundcore evdev usb_common vboxnetflt(O) vboxdrv(O)Oops#2 Part8 loop tun binfmt_misc fuse msr acpi_call(O) ipv6 autofs4 CPU: 0 PID: 21612 Comm: kworker/0:1 Tainted: G W O 3.10.1SIGN #28 Hardware name: LENOVO 2306CTO/2306CTO, BIOS G2ET92WW (2.52 ) 02/22/2013 Workqueue: cifsiod cifs_echo_request [cifs] task: ffff8801e1f416f0 ti: ffff880148744000 task.ti: ffff880148744000 RIP: 0010:[<ffffffff814dcc13>] [<ffffffff814dcc13>] sock_sendmsg+0x93/0xd0 RSP: 0000:ffff880148745b00 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff880148745b78 RCX: 0000000000000048 RDX: ffff880148745c90 RSI: ffff880181864a00 RDI: ffff880148745b78 RBP: ffff880148745c48 R08: 0000000000000048 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffff880181864a00 R13: ffff880148745c90 R14: 0000000000000048 R15: 0000000000000048 FS: 0000000000000000(0000) GS:ffff88021e200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000088 CR3: 000000020c42c000 CR4: 00000000001407b0 Oops#2 Part7 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Stack: ffff880148745b30 ffffffff810c4af9 0000004848745b30 ffff880181864a00 ffffffff81ffbc40 0000000000000000 ffff880148745c90 ffffffff810a5aab ffff880148745bc0 ffffffff81ffbc40 ffff880148745b60 ffffffff815a9fb8 Call Trace: [<ffffffff810c4af9>] ? finish_task_switch+0x49/0xe0 [<ffffffff810a5aab>] ? lock_timer_base.isra.36+0x2b/0x50 [<ffffffff815a9fb8>] ? _raw_spin_unlock_irqrestore+0x18/0x40 [<ffffffff810a673f>] ? try_to_del_timer_sync+0x4f/0x70 [<ffffffff815aa38f>] ? _raw_spin_unlock_bh+0x1f/0x30 [<ffffffff814dcc87>] kernel_sendmsg+0x37/0x50 [<ffffffffa081a0e0>] smb_send_kvec+0xd0/0x1d0 [cifs] [<ffffffffa081a263>] smb_send_rqst+0x83/0x1f0 [cifs] [<ffffffffa081ab6c>] cifs_call_async+0xec/0x1b0 [cifs] [<ffffffffa08245e0>] ? free_rsp_buf+0x40/0x40 [cifs] Oops#2 Part6 [<ffffffffa082606e>] SMB2_echo+0x8e/0xb0 [cifs] [<ffffffffa0808789>] cifs_echo_request+0x79/0xa0 [cifs] [<ffffffff810b45b3>] process_one_work+0x173/0x4a0 [<ffffffff810b52a1>] worker_thread+0x121/0x3a0 [<ffffffff810b5180>] ? manage_workers.isra.27+0x2b0/0x2b0 [<ffffffff810bae00>] kthread+0xc0/0xd0 [<ffffffff810bad40>] ? kthread_create_on_node+0x120/0x120 [<ffffffff815b199c>] ret_from_fork+0x7c/0xb0 [<ffffffff810bad40>] ? kthread_create_on_node+0x120/0x120 Code: 84 24 b8 00 00 00 4c 89 f1 4c 89 ea 4c 89 e6 48 89 df 4c 89 60 18 48 c7 40 28 00 00 00 00 4c 89 68 30 44 89 70 14 49 8b 44 24 28 <ff> 90 88 00 00 00 3d ef fd ff ff 74 10 48 8d 65 e0 5b 41 5c 41 RIP [<ffffffff814dcc13>] sock_sendmsg+0x93/0xd0 RSP <ffff880148745b00> CR2: 0000000000000088 The client was in the middle of trying to send a frame when the server->ssocket pointer got zeroed out. In most places, that we access that pointer, the srv_mutex is held. There's only one spot that I see that the server->ssocket pointer gets set and the srv_mutex isn't held. This patch corrects that. The upstream bug report was here: https://bugzilla.kernel.org/show_bug.cgi?id=60557Reported-by:
Oleksii Shevchuk <alxchk@gmail.com> Signed-off-by:
Jeff Layton <jlayton@redhat.com> Signed-off-by:
-
Oleg Nesterov authored
commit 03e12617 upstream. Starting from v3.10 (probably commit f91e2590: "tty: Signal foreground group processes in hangup") disassociate_ctty() sends SIGCONT if tty && on_exit. This breaks LSB test-suite, in particular test8 in _exit.c and test40 in sigcon5.c. Put the "!on_exit" check back to restore the old behaviour. Review by Peter Hurley: "Yes, this regression was introduced by me in that commit. The effect of the regression is that ptys will receive a SIGCONT when, in similar circumstances, ttys would not. The fact that two test vectors accidentally tripped over this regression suggests that some other apps may as well. Thanks for catching this" Signed-off-by:
Oleg Nesterov <oleg@redhat.com> Reported-by:
Karel Srot <ksrot@redhat.com> Reviewed-by:
Peter Hurley <peter@hurleysoftware.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Felipe Balbi authored
commit b0d7ffd4 upstream. We cannot request an IRQ with spinlocks held as that would trigger a sleeping inside spinlock warning. Reported-by:
Stephen Boyd <sboyd@codeaurora.org> Signed-off-by:
Felipe Balbi <balbi@ti.com> Signed-off-by:
-
Shawn Nematbakhsh authored
commit c8476fb8 upstream. If a USB controller with XHCI_RESET_ON_RESUME goes to runtime suspend, a reset will be performed upon runtime resume. Any previously suspended devices attached to the controller will be re-enumerated at this time. This will cause problems, for example, if an open system call on the device triggered the resume (the open call will fail). Note that this change is only relevant when persist_enabled is not set for USB devices. This patch should be backported to kernels as old as 3.0, that contain the commit c877b3b2 "xhci: Add reset on resume quirk for asrock p67 host". Signed-off-by:
Shawn Nematbakhsh <shawnn@chromium.org> Signed-off-by:
Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by:
-
Sarah Sharp authored
commit 52fb6125 upstream. The xHCI platform driver calls into usb_add_hcd to register the irq for its platform device. It does not want the xHCI generic driver to register an interrupt for it at all. The original code did that by setting the XHCI_BROKEN_MSI quirk, which tells the xHCI driver to not enable MSI or MSI-X for a PCI host. Unfortunately, if CONFIG_PCI is enabled, and CONFIG_USB_DW3 is enabled, the xHCI generic driver will attempt to register a legacy PCI interrupt for the xHCI platform device in xhci_try_enable_msi(). This will result in a bogus irq being registered, since the underlying device is a platform_device, not a pci_device, and thus the pci_device->irq pointer will be bogus. Add a new quirk, XHCI_PLAT, so that the xHCI generic driver can distinguish between a PCI device that can't handle MSI or MSI-X, and a platform device that should not have its interrupts touched at all. This quirk may be useful in the future, in case other corner cases like this arise. This patch should be backported to kernels as old as 3.9, that contain the commit 00eed9c8 "USB: xhci: correctly enable interrupts". Signed-off-by:
Yu Y Wang <yu.y.wang@intel.com> Tested-by:
-
Paul Mackerras authored
commit 7bfa9ad5 upstream. Commit 8e44ddc3 ("powerpc/kvm/book3s: Add support for H_IPOLL and H_XIRR_X in XICS emulation") added a call to get_tb() but didn't include the header that defines it, and on some configs this means book3s_xics.c fails to compile: arch/powerpc/kvm/book3s_xics.c: In function ‘kvmppc_xics_hcall’: arch/powerpc/kvm/book3s_xics.c:812:3: error: implicit declaration of function ‘get_tb’ [-Werror=implicit-function-declaration] Signed-off-by:
Paul Mackerras <paulus@samba.org> Signed-off-by:
Alexander Graf <agraf@suse.de> Signed-off-by:
-
Peter Maydell authored
commit 99f2b130 upstream. The SMAP register offsets in the versatile PCI controller code were all off by four. (This didn't have any observable bad effects because on this board PHYS_OFFSET is zero, and (a) writing zero to the flags register at offset 0x10 has no effect and (b) the reset value of the SMAP register is zero anyway, so failing to write SMAP2 didn't matter.) Signed-off-by:
Peter Maydell <peter.maydell@linaro.org> Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Kevin Hilman <khilman@linaro.org> Signed-off-by:
-
Peter Maydell authored
commit 829f9fed upstream. The versatile PCI controller code was confused between the PCI I/O window (at 0x43000000) and the first PCI memory window (at 0x44000000). Pass the correct base address to pci_remap_io() so that PCI I/O accesses work. Since the first PCI memory window isn't used at all (it's an odd size), rename the associated variables and labels so that it's clear that it isn't related to the I/O window. This has been tested and confirmed to fix PCI I/O accesses both on physical PB926+PCI backplane hardware and on QEMU. Signed-off-by:
-
Peter Maydell authored
commit f9b71fef upstream. The PCI controller code for the Versatile board has never had the correct IRQ mapping for hardware. For many years it had an odd mapping ("all interrupts are int 27") which aligned with the equivalent bug in QEMU. However as of commit 1bc39ac5 the mapping changed and no longer matched either hardware or QEMU, with the result that any PCI card beyond the first in QEMU would not have functioning interrupts; for example a boot with a SCSI controller would time out as follows: ------------ sym0: <895a> rev 0x0 at pci 0000:00:0d.0 irq 92 sym0: SCSI BUS has been reset. scsi0 : sym-2.2.3 [...] scsi 0:0:0:0: ABORT operation started scsi 0:0:0:0: ABORT operation timed-out. scsi 0:0:0:0: DEVICE RESET operation started scsi 0:0:0:0: DEVICE RESET operation timed-out. scsi 0:0:0:0: BUS RESET operation started scsi 0:0:0:0: BUS RESET operation timed-out. scsi 0:0:0:0: HOST RESET operation started sym0: SCSI BUS has been reset ------------ Fix the mapping so that it matches real hardware (checked against the schematics for PB926 and backplane, and tested against the hardware). This allows PCI cards using interrupts to work on hardware for the first time; this change will also work with QEMU 1.5 or later, where the equivalent bugs in the modelling of the hardware have been fixed. Although QEMU will attempt to autodetect whether the kernel is expecting the long-standing "everything is int 27" mapping or the one hardware has, for certainty we force it into "definitely behave like hardware mode"; this will avoid unexpected surprises later if we implement sparse irqs. This is harmless on hardware. Thanks to Paul Gortmaker for bisecting the problem and finding an initial solution, to Russell King for providing the correct interrupt mapping, and to Guenter Roeck for providing an initial version of this patch and prodding me into relocating the hardware and retesting everything. Signed-off-by:
-
Will Deacon authored
commit 178cd9ce upstream. This is a port of f2fe09b0 ("ARM: 7663/1: perf: fix ARMv7 EVTYPE_MASK to include NSH bit") to arm64, which fixes the broken evtype mask to include the NSH bit, allowing profiling at EL2. Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
Will Deacon authored
commit 8455e6ec upstream. This is a port of cb2d8b34 ("ARM: 7698/1: perf: fix group validation when using enable_on_exec") to arm64, which fixes the event validation checking so that events in the OFF state are still considered when enable_on_exec is true. Signed-off-by:
-
Christoffer Dall authored
commit 240e99cb upstream. The PAR was exported as CRn == 7 and CRm == 0, but in fact the primary coprocessor register number was determined by CRm for 64-bit coprocessor registers as the user space API was modeled after the coprocessor access instructions (see the ARM ARM rev. C - B3-1445). However, just changing the CRn to CRm breaks the sorting check when booting the kernel, because the internal kernel logic always treats CRn as the primary register number, and it makes the table sorting impossible to understand for humans. Alternatively we could change the logic to always have CRn == CRm, but that becomes unclear in the number of ways we do look up of a coprocessor register. We could also have a separate 64-bit table but that feels somewhat over-engineered. Instead, keep CRn the primary representation of the primary coproc. register number in-kernel and always export the primary number as CRm as per the existing user space ABI. Note: The TTBR registers just magically worked because they happened to follow the CRn(0) regs and were considered CRn(0) in the in-kernel representation. Signed-off-by:
Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by:
Kim Phillips <kim.phillips@linaro.org> Cc: Gleb Natapov <gleb@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jonghwan Choi <jhbird.choi@samsung.com> Signed-off-by:
-
Arnd Bergmann authored
commit 8b2efa89 upstream. A recent series has added CPU numbers to a lot of dts files, but unfortunately in a few cases the #address-cells and #size-cells values are missing, which causes build warnings. This adds the missing ones for sunxi and sama5 that I found through build testing. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by:
-
Lorenzo Pieralisi authored
commit 14c44aa5 upstream. This patch updates the in-kernel dts files according to the latest cpus and cpu bindings updates for ARM. Signed-off-by:
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by:
Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by:
-
Lorenzo Pieralisi authored
commit e757a6ee upstream. This patch updates the in-kernel dts files according to the latest cpus and cpu bindings updates for ARM. Signed-off-by:
Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by:
-
Colin Cross authored
commit 9e19b73c upstream. The coupled cpuidle waiting loop clears pending pokes before entering the safe state. If a poke arrives just before the pokes are cleared, but after the while loop condition checks, the poke will be lost and the cpu will stay in the safe state until another interrupt arrives. This may cause the cpu that sent the poke to spin in the ready loop with interrupts off until another cpu receives an interrupt, and if no other cpus have interrupts routed to them it can spin forever. Change the return value of cpuidle_coupled_clear_pokes to return if a poke was cleared, and move the need_resched() checks into the callers. In the waiting loop, if a poke was cleared restart the loop to repeat the while condition checks. Reported-by:
Neil Zhang <zhangwm@marvell.com> Signed-off-by:
Colin Cross <ccross@android.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Colin Cross authored
commit f983827b upstream. Joseph Lo <josephl@nvidia.com> reported a lockup on Tegra20 caused by a race condition in coupled cpuidle. When two or more cpus enter idle at the same time, the first cpus to arrive may go to the ready loop without processing pending pokes from the last cpu to arrive. This patch adds a check for pending pokes once all cpus have been synchronized in the ready loop and resets the coupled state and retries if any cpus failed to handle their pending poke. Retrying on all cpus may trigger the same issue again, so this patch also adds a check to ensure that each cpu has received at least one poke between when it enters the waiting loop and when it moves on to the ready loop. Reported-and-tested-by:
Joseph Lo <josephl@nvidia.com> Tested-by:
Stephen Warren <swarren@nvidia.com> Signed-off-by:
-
Rob Herring authored
commit 9dd4b294 upstream. xen_pm_init was unconditionally setting pm_power_off and arm_pm_restart function pointers. This breaks multi-platform kernels. Make this conditional on running as a Xen guest and make it a late_initcall to ensure it is setup after platform code for Dom0. Signed-off-by:
Rob Herring <rob.herring@calxeda.com> Signed-off-by:
Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by:
-
Roger Pau Monne authored
commit 5f338d90 upstream. With the current implementation, the callback in the tail of the list can be added twice, because the check done in gnttab_request_free_callback is bogus, callback->next can be NULL if it is the last callback in the list. If we add the same callback twice we end up with an infinite loop, were callback == callback->next. Replace this check with a proper one that iterates over the list to see if the callback has already been added. Signed-off-by:
Roger Pau Monné <roger.pau@citrix.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: David Vrabel <david.vrabel@citrix.com> Signed-off-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Acked-by:
Matt Wilson <msw@amazon.com> Reviewed-by:
David Vrabel <david.vrabel@citrix.com> Signed-off-by:
-
Vaidyanathan Srinivasan authored
commit 363edbe2 upstream. When adding cpuidle support to pSeries, we introduced two regressions: - The new cpuidle backend driver only works under hypervisors supporting the "SLPLAR" option, which isn't the case of the old POWER4 hypervisor and the HV "light" used on js2x blades - The cpuidle driver registers fairly late, meaning that for a significant portion of the boot process, we end up having all threads spinning. This slows down the boot process and increases the overall resource usage if the hypervisor has shared processors. This fixes both by implementing a "default" idle that will cede to the hypervisor when possible, in a very simple way without all the bells and whisles of cpuidle. Reported-by:
Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Acked-by:
Deepthi Dharwar <deepthi@linux.vnet.ibm.com> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Anton Blanchard authored
commit 230aef7a upstream. Normally when we haven't implemented an alignment handler for a load or store instruction the process will be terminated. The alignment handler uses the DSISR (or a pseudo one) to locate the right handler. Unfortunately ldbrx and stdbrx overlap lfs and stfs so we incorrectly think ldbrx is an lfs and stdbrx is an stfs. This bug is particularly nasty - instead of terminating the process we apply an incorrect fixup and continue on. With more and more overlapping instructions we should stop creating a pseudo DSISR and index using the instruction directly, but for now add a special case to catch ldbrx/stdbrx. Signed-off-by:
Anton Blanchard <anton@samba.org> Signed-off-by:
-
Herbert Xu authored
commit 77dbd7a9 upstream. crypto_larval_lookup should only return a larval if it created one. Any larval created by another entity must be processed through crypto_larval_wait before being returned. Otherwise this will lead to a larval being killed twice, which will most likely lead to a crash. Reported-by:
Kees Cook <keescook@chromium.org> Tested-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Alan Stern authored
commit 984f1733 upstream. This patch fixes an out-of-bounds error in sd_read_cache_type(), found by Google's AddressSanitizer tool. When the loop ends, we know that "offset" lies beyond the end of the data in the buffer, so no Caching mode page was found. In theory it may be present, but the buffer size is limited to 512 bytes. Signed-off-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
James Bottomley <JBottomley@Parallels.com> Signed-off-by:
-
Richard Weinberger authored
commit 5ef4414f upstream. get_peb_for_wl() removes the PEB from the free list. If the WL subsystem detects that no wear leveling is needed it cancels the operation and drops the gained PEB. In this case we have to put the PEB back into the free list. This issue was introduced with commit ed4b7021 (UBI: remove PEB from free tree in get_peb_for_wl()). Signed-off-by:
Richard Weinberger <richard@nod.at> Signed-off-by:
Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by:
-
Greg Kroah-Hartman authored
commit 9807b4d9 upstream. Right now the Makefile for the mpt3sas driver does not even allow the driver to be built into the kernel. So fix that up, as there doesn't seem to be any obvious reason why this shouldn't be done. Signed-off-by:
Sreekanth Reddy <Sreekanth.Reddy@lsi.com> Signed-off-by:
-
- 14 Sep, 2013 8 commits
-
-
Greg Kroah-Hartman authored
-
Jean-Christophe PLAGNIOL-VILLARD authored
commit f89ae61b upstream. Signed-off-by:
Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by:
-
Bing Zhao authored
commit 1211c961 upstream. Bug 60747 - 1286:2044 [Microsoft Surface Pro] Marvell 88W8797 wifi show 3 interface under network https://bugzilla.kernel.org/show_bug.cgi?id=60747 This issue was also reported previously by OLPC and some folks from the community. There are 3 network interfaces with different types being created when mwifiex driver is loaded: 1. mlan0 (infra. STA) 2. uap0 (AP) 3. p2p0 (P2P_CLIENT) The Network Manager attempts to use all 3 interfaces above without filtering the managed interface type. As the result, 3 identical interfaces are displayed under network manager. If user happens to click on an entry under which its interface is uap0 or p2p0, the association will fail. Work around it by removing the creation of AP and P2P interfaces at driver loading time. These interfaces can be added with 'iw' or other applications manually when they are needed. Signed-off-by:
Bing Zhao <bzhao@marvell.com> Signed-off-by:
Avinash Patil <patila@marvell.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com> Signed-off-by:
-
Sangjung Woo authored
commit 1748cbf7 upstream. Fix a read of the wrong register when checking whether the RTC timer has reached the alarm time. Signed-off-by:
Sangjung Woo <sangjung.woo@samsung.com> Signed-off-by:
Myugnjoo Ham <myungjoo.ham@samsung.com> Reviewed-by:
Jonghwa Lee <jonghwa3.lee@samsung.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Jonghwan Choi <jhbird.choi@samsung.com> Signed-off-by:
-
John Haxby authored
commit edb6f294 upstream. This affects xen pv guests with sufficiently old versions of xen and sufficiently new hardware. On such a system, a guest with a btrfs root won't even boot. Signed-off-by:
John Haxby <john.haxby@oracle.com> Signed-off-by:
Michael Marineau <michael.marineau@coreos.com> Signed-off-by:
-
Thomas Petazzoni authored
[ Upstream commit 71408602 ] This commit fixes a long-standing bug that has been reported by many users: on some Armada 370 platforms, only the network interface that has been used in U-Boot to tftp the kernel works properly in Linux. The other network interfaces can see a 'link up', but are unable to transmit data. The reports were generally made on the Armada 370-based Mirabox, but have also been given on the Armada 370-RD board. The network MAC in the Armada 370/XP (supported by the mvneta driver in Linux) has a functionality that allows it to continuously poll the PHY and directly update the MAC configuration accordingly (speed, duplex, etc.). The very first versions of the driver submitted for review were using this hardware mechanism, but due to this, the driver was not integrated with the kernel phylib. Following reviews, the driver was changed to use the phylib, and therefore a software based polling. In software based polling, Linux regularly talks to the PHY over the MDIO bus, and sees if the link status has changed. If it's the case then the adjust_link() callback of the driver is called to update the MAC configuration accordingly. However, it turns out that the adjust_link() callback was not configuring the hardware in a completely correct way: while it was setting the speed and duplex bits correctly, it wasn't telling the hardware to actually take into account those bits rather than what the hardware-based PHY polling mechanism has concluded. So, in fact the adjust_link() callback was basically a no-op. However, the network happened to be working because on the network interfaces used by U-Boot for tftp on Armada 370 platforms because the hardware PHY polling was enabled by the bootloader, and left enabled by Linux. However, the second network interface not used for tftp (or both network interfaces if the kernel is loaded from USB, NAND or SD card) didn't had the hardware PHY polling enabled. This patch fixes this situation by: (1) Making sure that the hardware PHY polling is disabled by clearing the MVNETA_PHY_POLLING_ENABLE bit in the MVNETA_UNIT_CONTROL register in the driver ->probe() function. (2) Making sure that the duplex and speed selections made by the adjust_link() callback are taken into account by clearing the MVNETA_GMAC_AN_SPEED_EN and MVNETA_GMAC_AN_DUPLEX_EN bits in the MVNETA_GMAC_AUTONEG_CONFIG register. This patch has been tested on Armada 370 Mirabox, and now both network interfaces are usable after boot. [ Problem introduced by commit c5aff182 ("net: mvneta: driver for Marvell Armada 370/XP network unit") ] Signed-off-by:
Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: Willy Tarreau <w@1wt.eu> Cc: Jochen De Smet <jochen.armkernel@leahnim.org> Cc: Peter Sanford <psanford@nearbuy.io> Cc: Ethan Tuttle <ethan@ethantuttle.com> Cc: Chény Yves-Gael <yves@cheny.fr> Cc: Ryan Press <ryan@presslab.us> Cc: Simon Guinot <simon.guinot@sequanux.org> Cc: vdonnefort@lacie.com Cc: stable@vger.kernel.org Acked-by:
Jason Cooper <jason@lakedaemon.net> Tested-by:
Vincent Donnefort <vdonnefort@gmail.com> Tested-by:
Yves-Gael Cheny <yves@cheny.fr> Tested-by:
Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by:
-
Daniel Borkmann authored
[ Upstream commit 3a1c7565 ] In tcp_v6_do_rcv() code, when processing pkt options, we soley work on our skb clone opt_skb that we've created earlier before entering tcp_rcv_established() on our way. However, only in condition ... if (np->rxopt.bits.rxtclass) np->rcv_tclass = ipv6_get_dsfield(ipv6_hdr(skb)); ... we work on skb itself. As we extract every other information out of opt_skb in ipv6_pktoptions path, this seems wrong, since skb can already be released by tcp_rcv_established() earlier on. When we try to access it in ipv6_hdr(), we will dereference freed skb. [ Bug added by commit 4c507d28 ("net: implement IP_RECVTOS for IP_PKTOPTIONS") ] Signed-off-by:
Daniel Borkmann <dborkman@redhat.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Acked-by:
Eric Dumazet <edumazet@google.com> Acked-by:
Jiri Benc <jbenc@redhat.com> Signed-off-by:
-
Hannes Frederic Sowa authored
[ Upstream commit 639739b5 ] Commit b67bfe0d ("hlist: drop the node parameter from iterators") changed the behavior of hlist_for_each_entry_safe to leave the p argument NULL. Fix this up by tracking the last argument. Reported-by:
Michele Baldessari <michele@acksyn.org> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: Sasha Levin <sasha.levin@oracle.com> Signed-off-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Tested-by:
-
