- 27 Oct, 2017 6 commits
-
-
Xin Long authored
The similar fix in patch 'ipip: only increase err_count for some certain type icmp in ipip_err' is needed for ip6gre_err. In Jianlin's case, udp netperf broke even when receiving a TooBig icmpv6 packet. Fixes: c12b395a ("gre: Support GRE over IPv6") Reported-by: Jianlin Shi <jishi@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Xin Long authored
t->err_count is used to count the link failure on tunnel and an err will be reported to user socket in tx path if t->err_count is not 0. udp socket could even return EHOSTUNREACH to users. Since commit fd58156e ("IPIP: Use ip-tunneling code.") removed the 'switch check' for icmp type in ipip_err(), err_count would be increased by the icmp packet with ICMP_EXC_FRAGTIME code. an link failure would be reported out due to this. In Jianlin's case, when receiving ICMP_EXC_FRAGTIME a icmp packet, udp netperf failed with the err: send_data: data send error: No route to host (errno 113) We expect this error reported from tunnel to socket when receiving some certain type icmp, but not ICMP_EXC_FRAGTIME, ICMP_SR_FAILED or ICMP_PARAMETERPROB ones. This patch is to bring 'switch check' for icmp type back to ipip_err so that it only reports link failure for the right type icmp, just as in ipgre_err() and ipip6_err(). Fixes: fd58156e ("IPIP: Use ip-tunneling code.") Reported-by: Jianlin Shi <jishi@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jose Abreu authored
According to DWMAC databook the first queue operating mode must always be in DCB. As MTL_QUEUE_DCB = 1, we need to always set the first queue operating mode to DCB otherwise driver will think that queue is in AVB mode (because MTL_QUEUE_AVB = 0). Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: Joao Pinto <jpinto@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jose Abreu authored
According to DT bindings documentation we are expecting a property called "snps,read-requests" but we are parsing instead a property called "read,read-requests". This is clearly a typo. Fix it. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: Joao Pinto <jpinto@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxDavid S. Miller authored
Saeed Mahameed says: ==================== Mellanox, mlx5 fixes 2017-10-26 The series includes some misc fixes for mlx5 core and etherent driver. Please pull and let me know if there's any problem. For -Stable: net/mlx5e: Properly deal with encap flows add/del under neigh update (kernels >= 4.12) net/mlx5: Fix health work queue spin lock to IRQ safe (kernels >= 4.13) ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Merge tag 'mac80211-for-davem-2017-10-25' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== pull-request: mac80211 2017-10-25 Here are: * follow-up fixes for the WoWLAN security issue, to fix a partial TKIP key material problem and to use crypto_memneq() * a change for better enforcement of FQ's memory limit * a disconnect/connect handling fix, and * a user rate mask validation fix ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 26 Oct, 2017 16 commits
-
-
Girish Moodalbail authored
Double free of skb_array in tap module is causing kernel panic. When tap_set_queue() fails we free skb_array right away by calling skb_array_cleanup(). However, later on skb_array_cleanup() is called again by tap_sock_destruct through sock_put(). This patch fixes that issue. Fixes: 362899b8 (macvtap: switch to use skb array) Signed-off-by: Girish Moodalbail <girish.moodalbail@oracle.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yousuk Seung authored
Current implementation calls tcp_rate_skb_sent() when tcp_transmit_skb() is called when it clones skb only. Not calling tcp_rate_skb_sent() is OK for all such code paths except from __tcp_retransmit_skb() which happens when skb->data address is not aligned. This may rarely happen e.g. when small amount of data is sent initially and the receiver partially acks odd number of bytes for some reason, possibly malicious. Signed-off-by: Yousuk Seung <ysseung@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
In my first attempt to fix the lockdep splat, I forgot we could enter inet_csk_route_req() with a freshly allocated request socket, for which refcount has not yet been elevated, due to complex SLAB_TYPESAFE_BY_RCU rules. We either are in rcu_read_lock() section _or_ we own a refcount on the request. Correct RCU verb to use here is rcu_dereference_check(), although it is not possible to prove we actually own a reference on a shared refcount :/ In v2, I added ireq_opt_deref() helper and use in three places, to fix other possible splats. [ 49.844590] lockdep_rcu_suspicious+0xea/0xf3 [ 49.846487] inet_csk_route_req+0x53/0x14d [ 49.848334] tcp_v4_route_req+0xe/0x10 [ 49.850174] tcp_conn_request+0x31c/0x6a0 [ 49.851992] ? __lock_acquire+0x614/0x822 [ 49.854015] tcp_v4_conn_request+0x5a/0x79 [ 49.855957] ? tcp_v4_conn_request+0x5a/0x79 [ 49.858052] tcp_rcv_state_process+0x98/0xdcc [ 49.859990] ? sk_filter_trim_cap+0x2f6/0x307 [ 49.862085] tcp_v4_do_rcv+0xfc/0x145 [ 49.864055] ? tcp_v4_do_rcv+0xfc/0x145 [ 49.866173] tcp_v4_rcv+0x5ab/0xaf9 [ 49.868029] ip_local_deliver_finish+0x1af/0x2e7 [ 49.870064] ip_local_deliver+0x1b2/0x1c5 [ 49.871775] ? inet_del_offload+0x45/0x45 [ 49.873916] ip_rcv_finish+0x3f7/0x471 [ 49.875476] ip_rcv+0x3f1/0x42f [ 49.876991] ? ip_local_deliver_finish+0x2e7/0x2e7 [ 49.878791] __netif_receive_skb_core+0x6d3/0x950 [ 49.880701] ? process_backlog+0x7e/0x216 [ 49.882589] __netif_receive_skb+0x1d/0x5e [ 49.884122] process_backlog+0x10c/0x216 [ 49.885812] net_rx_action+0x147/0x3df Fixes: a6ca7abe ("tcp/dccp: fix lockdep splat in inet_csk_route_req()") Fixes: c92e8c02 ("tcp/dccp: fix ireq->opt races") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: kernel test robot <fengguang.wu@intel.com> Reported-by: Maciej Żenczykowski <maze@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Håkon Bugge authored
The number of unsignaled work-requests posted to the IB send queue is tracked by a counter in the rds_ib_connection struct. When it reaches zero, or the caller explicitly asks for it, the send-signaled bit is set in send_flags and the counter is reset. This is performed by the rds_ib_set_wr_signal_state() function. However, this function is not always used which yields inaccurate accounting. This commit fixes this, re-factors a code bloat related to the matter, and makes the actual parameter type to the function consistent. Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Håkon Bugge authored
send_flags needs to be initialized before calling rds_ib_set_wr_signal_state(). Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Merge tag 'linux-can-fixes-for-4.14-20171024' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2017-10-24 here's another pull request for net/master. The patch by Gerhard Bertelsmann fixes the CAN_CTRLMODE_LOOPBACK in the sun4i driver. Two patches by Jimmy Assarsson for the kvaser_usb driver fix a print in the error path of the kvaser_usb_close() and remove a wrong warning message with the Leaf v2 firmware version v4.1.844. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Antoine Tenart authored
This patch replaces GFP_KERNEL by GFP_ATOMIC to avoid sleeping in the ndo_set_rx_mode() call which is called with BH disabled. Fixes: 3f518509 ("ethernet: Add new driver for Marvell Armada 375 network unit") Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Antoine Tenart authored
When calling mvpp2_prs_mac_multi_set() from mvpp2_prs_mac_init(), two parameters (the port index and the table index) are inverted. Fixes this. Fixes: 3f518509 ("ethernet: Add new driver for Marvell Armada 375 network unit") Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Antoine Tenart authored
This patch fixes a typo in the mvpp2_prs_tcam_data_cmp() function, as the shift value is inverted with the data. Fixes: 3f518509 ("ethernet: Add new driver for Marvell Armada 375 network unit") Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Huy Nguyen authored
Previously, tc with ets type and zero bandwidth is not accepted by driver. This behavior does not follow the IEEE802.1qaz spec. If there are tcs with ets type and zero bandwidth, these tcs are assigned to the lowest priority tc_group #0. We equally distribute 100% bw of the tc_group #0 to these zero bandwidth ets tcs. Also, the non zero bandwidth ets tcs are assigned to tc_group #1. If there is no zero bandwidth ets tc, the non zero bandwidth ets tcs are assigned to tc_group #0. Fixes: cdcf1121 ("net/mlx5e: Validate BW weight values of ETS") Signed-off-by: Huy Nguyen <huyn@mellanox.com> Reviewed-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
-
Or Gerlitz authored
Currently, the encap action offload is handled in the actions parse function and not in mlx5e_tc_add_fdb_flow() where we deal with all the other aspects of offloading actions (vlan, modify header) and the rule itself. When the neigh update code (mlx5e_tc_encap_flows_add()) recreates the encap entry and offloads the related flows, we wrongly call again into mlx5e_tc_add_fdb_flow(), this for itself would cause us to handle again the offloading of vlans and header re-write which puts things in non consistent state and step on freed memory (e.g the modify header parse buffer which is already freed). Since on error, mlx5e_tc_add_fdb_flow() detaches and may release the encap entry, it causes a corruption at the neigh update code which goes over the list of flows associated with this encap entry, or double free when the tc flow is later deleted by user-space. When neigh update (mlx5e_tc_encap_flows_del()) unoffloads the flows related to an encap entry which is now invalid, we do a partial repeat of the eswitch flow removal code which is wrong too. To fix things up we do the following: (1) handle the encap action offload in the eswitch flow add function mlx5e_tc_add_fdb_flow() as done for the other actions and the rule itself. (2) modify the neigh update code (mlx5e_tc_encap_flows_add/del) to only deal with the encap entry and rules delete/add and not with any of the other offloaded actions. Fixes: 232c0013 ('net/mlx5e: Add support to neighbour update flow') Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
-
Huy Nguyen authored
mlx5_ib_add is called during mlx5_pci_resume after a pci error. Before mlx5_ib_add completes, there are multiple events which trigger function mlx5_ib_event. This cause kernel panic because mlx5_ib_event accesses unitialized resources. The fix is to extend Erez Shitrit's patch <97834eba> ("net/mlx5: Delay events till ib registration ends") to cover the pci resume code path. Trace: mlx5_core 0001:01:00.6: mlx5_pci_resume was called mlx5_core 0001:01:00.6: firmware version: 16.20.1011 mlx5_core 0001:01:00.6: mlx5_attach_interface:164:(pid 779): mlx5_ib_event:2996:(pid 34777): warning: event on port 1 mlx5_ib_event:2996:(pid 34782): warning: event on port 1 Unable to handle kernel paging request for data at address 0x0001c104 Faulting instruction address: 0xd000000008f411fc Oops: Kernel access of bad area, sig: 11 [#1] ... ... Call Trace: [c000000fff77bb70] [d000000008f4119c] mlx5_ib_event+0x64/0x470 [mlx5_ib] (unreliable) [c000000fff77bc60] [d000000008e67130] mlx5_core_event+0xb8/0x210 [mlx5_core] [c000000fff77bd10] [d000000008e4bd00] mlx5_eq_int+0x528/0x860[mlx5_core] Fixes: 97834eba ("net/mlx5: Delay events till ib registration ends") Signed-off-by: Huy Nguyen <huyn@mellanox.com> Reviewed-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
-
Moshe Shemesh authored
spin_lock/unlock of health->wq_lock should be IRQ safe. It was changed to spin_lock_irqsave since adding commit 0179720d ("net/mlx5: Introduce trigger_health_work function") which uses spin_lock from asynchronous event (IRQ) context. Thus, all spin_lock/unlock of health->wq_lock should have been moved to IRQ safe mode. However, one occurrence on new code using this lock missed that change, resulting in possible deadlock: kernel: Possible unsafe locking scenario: kernel: CPU0 kernel: ---- kernel: lock(&(&health->wq_lock)->rlock); kernel: <Interrupt> kernel: lock(&(&health->wq_lock)->rlock); kernel: #012 *** DEADLOCK *** Fixes: 2a0165a0 ("net/mlx5: Cancel delayed recovery work when unloading the driver") Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
-
Julien Gomes authored
If the name argument of dev_get_valid_name() contains "%d", it will try to assign it a unit number in __dev__alloc_name() and return either the unit number (>= 0) or an error code (< 0). Considering positive values as error values prevent tun device creations relying this mechanism, therefor we should only consider negative values as errors here. Signed-off-by: Julien Gomes <julien@arista.com> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Pieter Jansen van Vuuren authored
Previously we did not ensure that a netdev is a representative netdev before dereferencing its private data. This can occur when an upper netdev is created on a representative netdev. This patch corrects this by first ensuring that the netdev is a representative netdev before using it. Checking only switchdev_port_same_parent_id is not sufficient to ensure that we can safely use the netdev. Failing to check that the netdev is also a representative netdev would result in incorrect dereferencing. Fixes: 1a1e586f ("nfp: add basic action capabilities to flower offloads") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Andrei Vagin authored
socket_diag shows information only about sockets from a namespace where a diag socket lives. But if we request information about one unix socket, the kernel don't check that its netns is matched with a diag socket namespace, so any user can get information about any unix socket in a system. This looks like a bug. v2: add a Fixes tag Fixes: 51d7cccf ("net: make sock diag per-namespace") Signed-off-by: Andrei Vagin <avagin@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 25 Oct, 2017 3 commits
-
-
Johannes Berg authored
For the reinstall prevention, the code I had added compares the whole key. It turns out though that iwlwifi firmware doesn't provide the TKIP TX MIC key as it's not needed in client mode, and thus the comparison will always return false. For client mode, thus always zero out the TX MIC key part before doing the comparison in order to avoid accepting the reinstall of the key with identical encryption and RX MIC key, but not the same TX MIC key (since the supplicant provides the real one.) Fixes: fdf7cb41 ("mac80211: accept key reinstall without changing anything") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-
Vivien Didelot authored
In the case of pdata, the dsa_cpu_parse function calls dev_put() before making sure it isn't NULL. Fix this. Fixes: 71e0bbde ("net: dsa: Add support for platform data") Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Tom Herbert authored
Sock lock may be taken in the message timer function which is a problem since timers run in BH. Instead of timers use delayed_work. Reported-by: Eric Dumazet <eric.dumazet@gmail.com> Fixes: bbb03029 ("strparser: Generalize strparser") Signed-off-by: Tom Herbert <tom@quantonium.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 24 Oct, 2017 10 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsecDavid S. Miller authored
Steffen Klassert says: ==================== pull request (net): ipsec 2017-10-24 1) Fix a memleak when we don't find a inner_mode during bundle creation. From David Miller. 2) Fix a xfrm policy dump crash. We may crash on error when dumping policies via netlink. Fix this by initializing the policy walk with the cb->start method. This fix is a serious stable candidate. From Herbert Xu. Please pull or let me know if there are problems. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jimmy Assarsson authored
To avoid kernel warning "Unhandled message (68)", ignore the CMD_FLUSH_QUEUE_REPLY message for now. As of Leaf v2 firmware version v4.1.844 (2017-02-15), flush tx queue is synchronous. There is a capability bit indicating whether flushing tx queue is synchronous or asynchronous. A proper solution would be to query the device for capabilities. If the synchronous tx flush capability bit is set, we should wait for CMD_FLUSH_QUEUE_REPLY message, while flushing the tx queue. Signed-off-by: Jimmy Assarsson <jimmyassarsson@gmail.com> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
-
Jimmy Assarsson authored
If the return value from kvaser_usb_send_simple_msg() was non-zero, the return value from kvaser_usb_flush_queue() was printed in the kernel warning. Signed-off-by: Jimmy Assarsson <jimmyassarsson@gmail.com> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
-
Gerhard Bertelsmann authored
Fix loopback mode by setting the right flag and remove presume mode. Signed-off-by: Gerhard Bertelsmann <info@gerhard-bertelsmann.de> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
-
Laszlo Toth authored
Commit 9b974202 ("sctp: support ipv6 nonlocal bind") introduced support for the above options as v4 sctp did, so patched sctp_v6_available(). In the v4 implementation it's enough, because sctp_inet_bind_verify() just returns with sctp_v4_available(). However sctp_inet6_bind_verify() has an extra check before that for link-local scope_id, which won't respect the above options. Added the checks before calling ipv6_chk_addr(), but not before the validation of scope_id. before (w/ both options): ./v6test fe80::10 sctp bind failed, errno: 99 (Cannot assign requested address) ./v6test fe80::10 tcp bind success, errno: 0 (Success) after (w/ both options): ./v6test fe80::10 sctp bind success, errno: 0 (Success) Signed-off-by: Laszlo Toth <laszlth@gmail.com> Reviewed-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Antoine Tenart authored
When Tx IRQs are used, txq_bufs_free() can be called from both the Tx path and from NAPI poll(). This led to CPU stalls as if these two tasks (Tx and Poll) are scheduled on two CPUs at the same time, DMA unmapping operations are done on the same txq buffers. This patch adds a check not to call txq_done() from the Tx path if Tx interrupts are used as it does not make sense to do so. Fixes: edc660fa ("net: mvpp2: replace TX coalescing interrupts with hrtimer") Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Antoine Tenart authored
The TSO header buffers are coming from a per cpu pool and should not be unmapped as they are reused. The PPv2 driver was unmapping all descriptors buffers unconditionally. This patch fixes this by checking the buffers dma addresses before unmapping them, and by not unmapping those who are located in the TSO header pool. Fixes: 186cd4d4 ("net: mvpp2: software tso support") Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yan Markman authored
TSO headers are managed with txq index and therefore should be aligned with the txq size, not with the aggregated txq size. Fixes: 186cd4d4 ("net: mvpp2: software tso support") Reported-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Yan Markman <ymarkman@marvell.com> Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Aleksander Morgado authored
The Huawei ME906 (12d1:15c1) comes with a standard ECM interface that requires management via AT commands sent over one of the control TTYs (e.g. connected with AT^NDISDUP). Signed-off-by: Aleksander Morgado <aleksander@aleksander.es> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ran Wang authored
This product is named 'TP-LINK USB 3.0 Gigabit Ethernet Network Adapter (Model No.is UE300)'. It uses chip RTL8153 and works with driver drivers/net/usb/r8152.c Signed-off-by: Ran Wang <ran.wang_1@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 23 Oct, 2017 3 commits
-
-
Herbert Xu authored
An independent security researcher, Mohamed Ghannam, has reported this vulnerability to Beyond Security's SecuriTeam Secure Disclosure program. The xfrm_dump_policy_done function expects xfrm_dump_policy to have been called at least once or it will crash. This can be triggered if a dump fails because the target socket's receive buffer is full. This patch fixes it by using the cb->start mechanism to ensure that the initialisation is always done regardless of the buffer situation. Fixes: 12a169e7 ("ipsec: Put dumpers on the dump list") Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
-
Eric Dumazet authored
This patch fixes the following lockdep splat in inet_csk_route_req() lockdep_rcu_suspicious inet_csk_route_req tcp_v4_send_synack tcp_rtx_synack inet_rtx_syn_ack tcp_fastopen_synack_time tcp_retransmit_timer tcp_write_timer_handler tcp_write_timer call_timer_fn Thread running inet_csk_route_req() owns a reference on the request socket, so we have the guarantee ireq->ireq_opt wont be changed or freed. lockdep can enforce this invariant for us. Fixes: c92e8c02 ("tcp/dccp: fix ireq->opt races") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Koichiro Den authored
When retransmission on TSQ handler was introduced in the commit f9616c35 ("tcp: implement TSQ for retransmits"), the retransmitted skbs' timestamps were updated on the actual transmission. In the later commit 385e2070 ("tcp: use tp->tcp_mstamp in output path"), it stops being done so. In the commit, the comment says "We try to refresh tp->tcp_mstamp only when necessary", and at present tcp_tsq_handler and tcp_v4_mtu_reduced applies to this. About the latter, it's okay since it's rare enough. About the former, even though possible retransmissions on the tasklet comes just after the destructor run in NET_RX softirq handling, the time between them could be nonnegligibly large to the extent that tcp_rack_advance or rto rearming be affected if other (remaining) RX, BLOCK and (preceding) TASKLET sofirq handlings are unexpectedly heavy. So in the same way as tcp_write_timer_handler does, doing tcp_mstamp_refresh ensures the accuracy of algorithms relying on it. Fixes: 385e2070 ("tcp: use tp->tcp_mstamp in output path") Signed-off-by: Koichiro Den <den@klaipeden.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 22 Oct, 2017 2 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: "A little more than usual this time around. Been travelling, so that is part of it. Anyways, here are the highlights: 1) Deal with memcontrol races wrt. listener dismantle, from Eric Dumazet. 2) Handle page allocation failures properly in nfp driver, from Jaku Kicinski. 3) Fix memory leaks in macsec, from Sabrina Dubroca. 4) Fix crashes in pppol2tp_session_ioctl(), from Guillaume Nault. 5) Several fixes in bnxt_en driver, including preventing potential NVRAM parameter corruption from Michael Chan. 6) Fix for KRACK attacks in wireless, from Johannes Berg. 7) rtnetlink event generation fixes from Xin Long. 8) Deadlock in mlxsw driver, from Ido Schimmel. 9) Disallow arithmetic operations on context pointers in bpf, from Jakub Kicinski. 10) Missing sock_owned_by_user() check in sctp_icmp_redirect(), from Xin Long. 11) Only TCP is supported for sockmap, make that explicit with a check, from John Fastabend. 12) Fix IP options state races in DCCP and TCP, from Eric Dumazet. 13) Fix panic in packet_getsockopt(), also from Eric Dumazet. 14) Add missing locked in hv_sock layer, from Dexuan Cui. 15) Various aquantia bug fixes, including several statistics handling cures. From Igor Russkikh et al. 16) Fix arithmetic overflow in devmap code, from John Fastabend. 17) Fix busted socket memory accounting when we get a fault in the tcp zero copy paths. From Willem de Bruijn. 18) Don't leave opt->tot_len uninitialized in ipv6, from Eric Dumazet" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (106 commits) stmmac: Don't access tx_q->dirty_tx before netif_tx_lock ipv6: flowlabel: do not leave opt->tot_len with garbage of_mdio: Fix broken PHY IRQ in case of probe deferral textsearch: fix typos in library helpers rxrpc: Don't release call mutex on error pointer net: stmmac: Prevent infinite loop in get_rx_timestamp_status() net: stmmac: Fix stmmac_get_rx_hwtstamp() net: stmmac: Add missing call to dev_kfree_skb() mlxsw: spectrum_router: Configure TIGCR on init mlxsw: reg: Add Tunneling IPinIP General Configuration Register net: ethtool: remove error check for legacy setting transceiver type soreuseport: fix initialization race net: bridge: fix returning of vlan range op errors sock: correct sk_wmem_queued accounting on efault in tcp zerocopy bpf: add test cases to bpf selftests to cover all access tests bpf: fix pattern matches for direct packet access bpf: fix off by one for range markings with L{T, E} patterns bpf: devmap fix arithmetic overflow in bitmap_size calculation net: aquantia: Bad udp rate on default interrupt coalescing net: aquantia: Enable coalescing management via ethtool interface ...
-
Bernd Edlinger authored
This is the possible reason for different hard to reproduce problems on my ARMv7-SMP test system. The symptoms are in recent kernels imprecise external aborts, and in older kernels various kinds of network stalls and unexpected page allocation failures. My testing indicates that the trouble started between v4.5 and v4.6 and prevails up to v4.14. Using the dirty_tx before acquiring the spin lock is clearly wrong and was first introduced with v4.6. Fixes: e3ad57c9 ("stmmac: review RX/TX ring management") Signed-off-by: Bernd Edlinger <bernd.edlinger@hotmail.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-