- 05 Jan, 2016 4 commits
-
-
Pavel Machek authored
[ Upstream commit f2a3771a ] atl1c driver is doing order-4 allocation with GFP_ATOMIC priority. That often breaks networking after resume. Switch to GFP_KERNEL. Still not ideal, but should be significantly better. atl1c_setup_ring_resources() is called from .open() function, and already uses GFP_KERNEL, so this change is safe. Signed-off-by: Pavel Machek <pavel@ucw.cz> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Nicolas Dichtel authored
[ Upstream commit 6a61d4db ] Parameters were updated only if the kernel was unable to find the tunnel with the new parameters, ie only if core pamareters were updated (keys, addr, link, type). Now it's possible to update ttl, hoplimit, flowinfo and flags. Fixes: c12b395a ("gre: Support GRE over IPv6") Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
WANG Cong authored
commit 7ba0c47c upstream. We need to wait for the flying timers, since we are going to free the mrtable right after it. Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Vineet Gupta authored
commit 30b9dbee upstream. Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
- 21 Dec, 2015 1 commit
-
-
Kamal Mostafa authored
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
- 17 Dec, 2015 9 commits
-
-
Konstantin Khlebnikov authored
commit 6adc5fd6 upstream. Proxy entries could have null pointer to net-device. Signed-off-by: Konstantin Khlebnikov <koct9i@gmail.com> Fixes: 84920c14 ("net: Allow ipv6 proxies and arp proxies be shown with iproute2") Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Aaro Koskinen authored
commit 3c25a860 upstream. Commit fcb26ec5 ("broadcom: move all PHY_ID's to header") updated broadcom_tbl to use PHY_IDs, but incorrectly replaced 0x0143bca0 with PHY_ID_BCM5482 (making a duplicate entry, and completely omitting the original). Fix that. Fixes: fcb26ec5 ("broadcom: move all PHY_ID's to header") Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Rainer Weikusat authored
commit 7d267278 upstream. Rainer Weikusat <rweikusat@mobileactivedefense.com> writes: An AF_UNIX datagram socket being the client in an n:1 association with some server socket is only allowed to send messages to the server if the receive queue of this socket contains at most sk_max_ack_backlog datagrams. This implies that prospective writers might be forced to go to sleep despite none of the message presently enqueued on the server receive queue were sent by them. In order to ensure that these will be woken up once space becomes again available, the present unix_dgram_poll routine does a second sock_poll_wait call with the peer_wait wait queue of the server socket as queue argument (unix_dgram_recvmsg does a wake up on this queue after a datagram was received). This is inherently problematic because the server socket is only guaranteed to remain alive for as long as the client still holds a reference to it. In case the connection is dissolved via connect or by the dead peer detection logic in unix_dgram_sendmsg, the server socket may be freed despite "the polling mechanism" (in particular, epoll) still has a pointer to the corresponding peer_wait queue. There's no way to forcibly deregister a wait queue with epoll. Based on an idea by Jason Baron, the patch below changes the code such that a wait_queue_t belonging to the client socket is enqueued on the peer_wait queue of the server whenever the peer receive queue full condition is detected by either a sendmsg or a poll. A wake up on the peer queue is then relayed to the ordinary wait queue of the client socket via wake function. The connection to the peer wait queue is again dissolved if either a wake up is about to be relayed or the client socket reconnects or a dead peer is detected or the client socket is itself closed. This enables removing the second sock_poll_wait from unix_dgram_poll, thus avoiding the use-after-free, while still ensuring that no blocked writer sleeps forever. Signed-off-by: Rainer Weikusat <rweikusat@mobileactivedefense.com> Fixes: ec0d215f ("af_unix: fix 'poll for write'/connected DGRAM sockets") Reviewed-by: Jason Baron <jbaron@akamai.com> Signed-off-by: David S. Miller <davem@davemloft.net> [ luis: backported to 3.16: adjusted context ] Signed-off-by: Luis Henriques <luis.henriques@canonical.com> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Nikolay Aleksandrov authored
commit 4c698046 upstream. Similar to ipv4, when destroying an mrt table the static mfc entries and the static devices are kept, which leads to devices that can never be destroyed (because of refcnt taken) and leaked memory. Make sure that everything is cleaned up on netns destruction. Fixes: 8229efda ("netns: ip6mr: enable namespace support in ipv6 multicast forwarding code") CC: Benjamin Thery <benjamin.thery@bull.net> Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Reviewed-by: Cong Wang <cwang@twopensource.com> Signed-off-by: David S. Miller <davem@davemloft.net> [ luis: backported to 3.16: adjusted context ] Signed-off-by: Luis Henriques <luis.henriques@canonical.com> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Noa Osherovich authored
commit d49c2197 upstream. The err variable wasn't set with the correct error value in some cases. Fixes: 47605df9 ('mlx4: Modify proxy/tunnel QP mechanism [..]') Signed-off-by: Noa Osherovich <noaos@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> [ luis: backported to 3.16: adjusted context ] Signed-off-by: Luis Henriques <luis.henriques@canonical.com> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Daniel Borkmann authored
commit 5cfb4c8d upstream. Since it's introduction in commit 69e3c75f ("net: TX_RING and packet mmap"), TX_RING could be used from SOCK_DGRAM and SOCK_RAW side. When used with SOCK_DGRAM only, the size_max > dev->mtu + reserve check should have reserve as 0, but currently, this is unconditionally set (in it's original form as dev->hard_header_len). I think this is not correct since tpacket_fill_skb() would then take dev->mtu and dev->hard_header_len into account for SOCK_DGRAM, the extra VLAN_HLEN could be possible in both cases. Presumably, the reserve code was copied from packet_snd(), but later on missed the check. Make it similar as we have it in packet_snd(). Fixes: 69e3c75f ("net: TX_RING and packet mmap") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Daniel Borkmann authored
commit 3c70c132 upstream. Packet sockets can be used by various net devices and are not really restricted to ARPHRD_ETHER device types. However, when currently checking for the extra 4 bytes that can be transmitted in VLAN case, our assumption is that we generally probe on ARPHRD_ETHER devices. Therefore, before looking into Ethernet header, check the device type first. This also fixes the issue where non-ARPHRD_ETHER devices could have no dev->hard_header_len in TX_RING SOCK_RAW case, and thus the check would test unfilled linear part of the skb (instead of non-linear). Fixes: 57f89bfa ("network: Allow af_packet to transmit +4 bytes for VLAN packets.") Fixes: 52f1454f ("packet: allow to transmit +4 byte in TX_RING slot for VLAN case") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Alexander Drozdov authored
commit dbd46ab4 upstream. tpacket_fill_skb() can return a negative value (-errno) which is stored in tp_len variable. In that case the following condition will be (but shouldn't be) true: tp_len > dev->mtu + dev->hard_header_len as dev->mtu and dev->hard_header_len are both unsigned. That may lead to just returning an incorrect EMSGSIZE errno to the user. Fixes: 52f1454f ("packet: allow to transmit +4 byte in TX_RING slot for VLAN case") Signed-off-by: Alexander Drozdov <al.drozdov@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Daniel Borkmann authored
commit 52f1454f upstream. Commit 57f89bfa ("network: Allow af_packet to transmit +4 bytes for VLAN packets.") added the possibility for non-mmaped frames to send extra 4 byte for VLAN header so the MTU increases from 1500 to 1504 byte, for example. Commit cbd89acb ("af_packet: fix for sending VLAN frames via packet_mmap") attempted to fix that for the mmap part but was reverted as it caused regressions while using eth_type_trans() on output path. Lets just act analogous to 57f89bfa and add a similar logic to TX_RING. We presume size_max as overcharged with +4 bytes and later on after skb has been built by tpacket_fill_skb() check for ETH_P_8021Q header on packets larger than normal MTU. Can be easily reproduced with a slightly modified trafgen in mmap(2) mode, test cases: { fill(0xff, 12) const16(0x8100) fill(0xff, <1504|1505>) } { fill(0xff, 12) const16(0x0806) fill(0xff, <1500|1501>) } Note that we need to do the test right after tpacket_fill_skb() as sockets can have PACKET_LOSS set where we would not fail but instead just continue to traverse the ring. Reported-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Ben Greear <greearb@candelatech.com> Cc: Phil Sutter <phil@nwl.cc> Tested-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
- 16 Dec, 2015 26 commits
-
-
Sasha Levin authored
commit 119d6f6a upstream. Because wakeups can (fundamentally) be late, a task might not be in the expected state. Therefore testing against a task's state is racy, and can yield false positives. Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: oleg@redhat.com Fixes: 9067ac85 ("wake_up_process() should be never used to wakeup a TASK_STOPPED/TRACED task") Link: http://lkml.kernel.org/r/1448933660-23082-1-git-send-email-sasha.levin@oracle.comSigned-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Marcin Wojtas authored
commit dc1aadf6 upstream. A value originally defined in the driver was inappropriate. Even though the ingress was somehow working, writing MVNETA_RXQ_INTR_ENABLE_ALL_MASK to MVNETA_INTR_ENABLE didn't make any effect, because the bits [31:16] are reserved and read-only. This commit updates MVNETA_RXQ_INTR_ENABLE_ALL_MASK to be compliant with the controller's documentation. Signed-off-by: Marcin Wojtas <mw@semihalf.com> Fixes: c5aff182 ("net: mvneta: driver for Marvell Armada 370/XP network unit") Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Marcin Wojtas authored
commit e5bdf689 upstream. MVNETA_RXQ_HW_BUF_ALLOC bit which controls enabling hardware buffer allocation was mistakenly set as BIT(1). This commit fixes the assignment. Signed-off-by: Marcin Wojtas <mw@semihalf.com> Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Fixes: c5aff182 ("net: mvneta: driver for Marvell Armada 370/XP network unit") Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Marcin Wojtas authored
commit db6ba9a5 upstream. This commit adds missing configuration of MBUS windows access protection in mvneta_conf_mbus_windows function - a dedicated variable for that purpose remained there unused since v3.8 initial mvneta support. Because of that the register contents were inherited from the bootloader. Signed-off-by: Marcin Wojtas <mw@semihalf.com> Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Fixes: c5aff182 ("net: mvneta: driver for Marvell Armada 370/XP network unit") Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Arnd Bergmann authored
commit 92792e48 upstream. Recent gcc versions warn about reading from a negative offset of an on-stack array: drivers/remoteproc/remoteproc_debugfs.c: In function 'rproc_recovery_write': drivers/remoteproc/remoteproc_debugfs.c:167:9: warning: 'buf[4294967295u]' may be used uninitialized in this function [-Wmaybe-uninitialized] I don't see anything in sys_write() that prevents us from being called with a zero 'count' argument, so we should add an extra check in rproc_recovery_write() to prevent the access and avoid the warning. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 2e37abb8 ("remoteproc: create a 'recovery' debugfs entry") Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Christoph Biedl authored
commit 19cebbcb upstream. Commit 35a4a573 ("isdn: clean up debug format string usage") introduced a safeguard to avoid accidential format string interpolation of data when calling debugl1 or HiSax_putstatus. This did however not take into account VHiSax_putstatus (called by HiSax_putstatus) does *not* call vsprintf if the head parameter is NULL - the format string is treated as plain text then instead. As a result, the string "%s" is processed literally, and the actual information is lost. This affects the isdnlog userspace program which stopped logging information since that commit. So revert the HiSax_putstatus invocations to the previous state. Fixes: 35a4a573 ("isdn: clean up debug format string usage") Cc: Kees Cook <keescook@chromium.org> Cc: Karsten Keil <isdn@linux-pingi.de> Signed-off-by: Christoph Biedl <linux-kernel.bfrz@manchmal.in-ulm.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Helmut Klein authored
commit 5442f0ea upstream. The "reg" entry in the "poweroff" section of "kirkwood-ts219.dtsi" addressed the wrong uart (0 = console). This patch changes the address to select uart 1, which is the uart connected to the pic microcontroller, which can switch the device off. Signed-off-by: Helmut Klein <hgkr.klein@gmail.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Fixes: 4350a47b ("ARM: Kirkwood: Make use of the QNAP Power off driver.") Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Eric Dumazet authored
commit 1b8e6a01 upstream. When a passive TCP is created, we eventually call tcp_md5_do_add() with sk pointing to the child. It is not owner by the user yet (we will add this socket into listener accept queue a bit later anyway) But we do own the spinlock, so amend the lockdep annotation to avoid following splat : [ 8451.090932] net/ipv4/tcp_ipv4.c:923 suspicious rcu_dereference_protected() usage! [ 8451.090932] [ 8451.090932] other info that might help us debug this: [ 8451.090932] [ 8451.090934] [ 8451.090934] rcu_scheduler_active = 1, debug_locks = 1 [ 8451.090936] 3 locks held by socket_sockopt_/214795: [ 8451.090936] #0: (rcu_read_lock){.+.+..}, at: [<ffffffff855c6ac1>] __netif_receive_skb_core+0x151/0xe90 [ 8451.090947] #1: (rcu_read_lock){.+.+..}, at: [<ffffffff85618143>] ip_local_deliver_finish+0x43/0x2b0 [ 8451.090952] #2: (slock-AF_INET){+.-...}, at: [<ffffffff855acda5>] sk_clone_lock+0x1c5/0x500 [ 8451.090958] [ 8451.090958] stack backtrace: [ 8451.090960] CPU: 7 PID: 214795 Comm: socket_sockopt_ [ 8451.091215] Call Trace: [ 8451.091216] <IRQ> [<ffffffff856fb29c>] dump_stack+0x55/0x76 [ 8451.091229] [<ffffffff85123b5b>] lockdep_rcu_suspicious+0xeb/0x110 [ 8451.091235] [<ffffffff8564544f>] tcp_md5_do_add+0x1bf/0x1e0 [ 8451.091239] [<ffffffff85645751>] tcp_v4_syn_recv_sock+0x1f1/0x4c0 [ 8451.091242] [<ffffffff85642b27>] ? tcp_v4_md5_hash_skb+0x167/0x190 [ 8451.091246] [<ffffffff85647c78>] tcp_check_req+0x3c8/0x500 [ 8451.091249] [<ffffffff856451ae>] ? tcp_v4_inbound_md5_hash+0x11e/0x190 [ 8451.091253] [<ffffffff85647170>] tcp_v4_rcv+0x3c0/0x9f0 [ 8451.091256] [<ffffffff85618143>] ? ip_local_deliver_finish+0x43/0x2b0 [ 8451.091260] [<ffffffff856181b6>] ip_local_deliver_finish+0xb6/0x2b0 [ 8451.091263] [<ffffffff85618143>] ? ip_local_deliver_finish+0x43/0x2b0 [ 8451.091267] [<ffffffff85618d38>] ip_local_deliver+0x48/0x80 [ 8451.091270] [<ffffffff85618510>] ip_rcv_finish+0x160/0x700 [ 8451.091273] [<ffffffff8561900e>] ip_rcv+0x29e/0x3d0 [ 8451.091277] [<ffffffff855c74b7>] __netif_receive_skb_core+0xb47/0xe90 Fixes: a8afca03 ("tcp: md5: protects md5sig_info with RCU") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Geert Uytterhoeven authored
commit cf897526 upstream. fs/cachefiles/rdwr.c: In function ‘cachefiles_write_page’: fs/cachefiles/rdwr.c:882: warning: ‘ret’ may be used uninitialized in this function If the jump to label "error" is taken, "ret" will indeed be uninitialized, and random stack data may be printed by the debug code. Fixes: 102f4d90 ("FS-Cache: Handle a write to the page immediately beyond the EOF marker") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Uwe Kleine-König authored
commit 705e63d2 upstream. There is a bit of a mess in the order of arguments to the ulpi write callback. There is int ulpi_write(struct ulpi *ulpi, u8 addr, u8 val) in drivers/usb/common/ulpi.c; struct usb_phy_io_ops { ... int (*write)(struct usb_phy *x, u32 val, u32 reg); } in include/linux/usb/phy.h. The callback registered by the musb driver has to comply to the latter, but up to now had "offset" first which effectively made the function broken for correct users. So flip the order and while at it also switch to the parameter names of struct usb_phy_io_ops's write. Fixes: ffb865b1 ("usb: musb: add ulpi access operations") Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
lucien authored
commit ed5a377d upstream. now sctp auth cannot work well when setting a hmacid manually, which is caused by that we didn't use the network order for hmacid, so fix it by adding the transformation in sctp_auth_ep_set_hmacs. even we set hmacid with the network order in userspace, it still can't work, because of this condition in sctp_auth_ep_set_hmacs(): if (id > SCTP_AUTH_HMAC_ID_MAX) return -EOPNOTSUPP; so this wasn't working before and thus it won't break compatibility. Fixes: 65b07e5d ("[SCTP]: API updates to suport SCTP-AUTH extensions.") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Luca Porzio authored
commit d3df0465 upstream. Anytime a write operation is performed with Reliable Write flag enabled, the eMMC device is enforced to bypass the cache and do a write to the underling NVM device by Jedec specification; this causes a performance penalty since write operations can't be optimized by the device cache. In our tests, we replayed a typical mobile daily trace pattern and found ~9% overall time reduction in trace replay by using this patch. Also the write ops within 4KB~64KB chunk size range get a 40~60% performance improvement by using the patch (as this range of write chunks are the ones affected by REQ_META). This patch has been discussed in the Mobile & Embedded Linux Storage Forum and it's the results of feedbacks from many people. We also checked with fsdevl and f2fs mailing list developers that this change in the usage of REQ_META is not affecting FS behavior and we got positive feedbacks. Reporting here the feedbacks: http://comments.gmane.org/gmane.linux.file-systems/97219 http://thread.gmane.org/gmane.linux.file-systems.f2fs/3178/focus=3183Signed-off-by: Bruce Ford <bford@micron.com> Signed-off-by: Luca Porzio <lporzio@micron.com> Fixes: ce39f9d1 ("mmc: support packed write command for eMMC4.5 devices") Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Dmitry V. Levin authored
commit 22eab110 upstream. When restarting a syscall with regs->ax == -ERESTART_RESTARTBLOCK, regs->ax is assigned to a restart_syscall number. For x32 tasks, this syscall number must have __X32_SYSCALL_BIT set, otherwise it will be an x86_64 syscall number instead of a valid x32 syscall number. This issue has been there since the introduction of x32. Reported-by: strace/tests/restart_syscall.test Reported-and-tested-by: Elvira Khabirova <lineprinter0@gmail.com> Signed-off-by: Dmitry V. Levin <ldv@altlinux.org> Cc: Elvira Khabirova <lineprinter0@gmail.com> Link: http://lkml.kernel.org/r/20151130215436.GA25996@altlinux.orgSigned-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Xunlei Pang authored
commit 8295c699 upstream. root_domain::rto_mask allocated through alloc_cpumask_var() contains garbage data, this may cause problems. For instance, When doing pull_rt_task(), it may do useless iterations if rto_mask retains some extra garbage bits. Worse still, this violates the isolated domain rule for clustered scheduling using cpuset, because the tasks(with all the cpus allowed) belongs to one root domain can be pulled away into another root domain. The patch cleans the garbage by using zalloc_cpumask_var() instead of alloc_cpumask_var() for root_domain::rto_mask allocation, thereby addressing the issues. Do the same thing for root_domain's other cpumask memembers: dlo_mask, span, and online. Signed-off-by: Xunlei Pang <xlpang@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1449057179-29321-1-git-send-email-xlpang@redhat.comSigned-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Peter Hurley authored
commit ee9159dd upstream. The N_X25 line discipline may access the previous line discipline's closed and already-freed private data on open [1]. The tty->disc_data field _never_ refers to valid data on entry to the line discipline's open() method. Rather, the ldisc is expected to initialize that field for its own use for the lifetime of the instance (ie. from open() to close() only). [1] [ 634.336761] ================================================================== [ 634.338226] BUG: KASAN: use-after-free in x25_asy_open_tty+0x13d/0x490 at addr ffff8800a743efd0 [ 634.339558] Read of size 4 by task syzkaller_execu/8981 [ 634.340359] ============================================================================= [ 634.341598] BUG kmalloc-512 (Not tainted): kasan: bad access detected ... [ 634.405018] Call Trace: [ 634.405277] dump_stack (lib/dump_stack.c:52) [ 634.405775] print_trailer (mm/slub.c:655) [ 634.406361] object_err (mm/slub.c:662) [ 634.406824] kasan_report_error (mm/kasan/report.c:138 mm/kasan/report.c:236) [ 634.409581] __asan_report_load4_noabort (mm/kasan/report.c:279) [ 634.411355] x25_asy_open_tty (drivers/net/wan/x25_asy.c:559 (discriminator 1)) [ 634.413997] tty_ldisc_open.isra.2 (drivers/tty/tty_ldisc.c:447) [ 634.414549] tty_set_ldisc (drivers/tty/tty_ldisc.c:567) [ 634.415057] tty_ioctl (drivers/tty/tty_io.c:2646 drivers/tty/tty_io.c:2879) [ 634.423524] do_vfs_ioctl (fs/ioctl.c:43 fs/ioctl.c:607) [ 634.427491] SyS_ioctl (fs/ioctl.c:622 fs/ioctl.c:613) [ 634.427945] entry_SYSCALL_64_fastpath (arch/x86/entry/entry_64.S:188) Reported-and-tested-by: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Bart Van Assche authored
commit b49493f9 upstream. Avoid that kmemleak reports the following memory leak if a SCSI LLD calls scsi_host_alloc() and scsi_host_put() but neither scsi_host_add() nor scsi_host_remove(). The following shell command triggers that scenario: for ((i=0; i<2; i++)); do srp_daemon -oac | while read line; do echo $line >/sys/class/infiniband_srp/srp-mlx4_0-1/add_target done done unreferenced object 0xffff88021b24a220 (size 8): comm "srp_daemon", pid 56421, jiffies 4295006762 (age 4240.750s) hex dump (first 8 bytes): 68 6f 73 74 35 38 00 a5 host58.. backtrace: [<ffffffff8151014a>] kmemleak_alloc+0x7a/0xc0 [<ffffffff81165c1e>] __kmalloc_track_caller+0xfe/0x160 [<ffffffff81260d2b>] kvasprintf+0x5b/0x90 [<ffffffff81260e2d>] kvasprintf_const+0x8d/0xb0 [<ffffffff81254b0c>] kobject_set_name_vargs+0x3c/0xa0 [<ffffffff81337e3c>] dev_set_name+0x3c/0x40 [<ffffffff81355757>] scsi_host_alloc+0x327/0x4b0 [<ffffffffa03edc8e>] srp_create_target+0x4e/0x8a0 [ib_srp] [<ffffffff8133778b>] dev_attr_store+0x1b/0x20 [<ffffffff811f27fa>] sysfs_kf_write+0x4a/0x60 [<ffffffff811f1e8e>] kernfs_fop_write+0x14e/0x180 [<ffffffff81176eef>] __vfs_write+0x2f/0xf0 [<ffffffff811771e4>] vfs_write+0xa4/0x100 [<ffffffff81177c64>] SyS_write+0x54/0xc0 [<ffffffff8151b257>] entry_SYSCALL_64_fastpath+0x12/0x6f Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Reviewed-by: Lee Duncan <lduncan@suse.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Hannes Reinecke authored
commit bf4e6b4e upstream. When a cloned request is retried on other queues it always needs to be checked against the queue limits of that queue. Otherwise the calculations for nr_phys_segments might be wrong, leading to a crash in scsi_init_sgtable(). To clarify this the patch renames blk_rq_check_limits() to blk_cloned_rq_check_limits() and removes the symbol export, as the new function should only be used for cloned requests and never exported. Cc: Mike Snitzer <snitzer@redhat.com> Cc: Ewan Milne <emilne@redhat.com> Cc: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Hannes Reinecke <hare@suse.de> Fixes: e2a60da7 ("block: Clean up special command handling logic") Acked-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Jan Engelhardt authored
commit d94e5a61 upstream. target_core_sbc's compare_and_write functionality suffers from taking data at the wrong memory location when writing a CAW request to disk when a SGL offset is non-zero. This can happen with loopback and vhost-scsi fabric drivers when SCF_PASSTHROUGH_SG_TO_MEM_NOALLOC is used to map existing user-space SGL memory into COMPARE_AND_WRITE READ/WRITE payload buffers. Given the following sample LIO subtopology, % targetcli ls /loopback/ o- loopback ................................. [1 Target] o- naa.6001405ebb8df14a ....... [naa.60014059143ed2b3] o- luns ................................... [2 LUNs] o- lun0 ................ [iblock/ram0 (/dev/ram0)] o- lun1 ................ [iblock/ram1 (/dev/ram1)] % lsscsi -g [3:0:1:0] disk LIO-ORG IBLOCK 4.0 /dev/sdc /dev/sg3 [3:0:1:1] disk LIO-ORG IBLOCK 4.0 /dev/sdd /dev/sg4 the following bug can be observed in Linux 4.3 and 4.4~rc1: % perl -e 'print chr$_ for 0..255,reverse 0..255' >rand % perl -e 'print "\0" x 512' >zero % cat rand >/dev/sdd % sg_compare_and_write -i rand -D zero --lba 0 /dev/sdd % sg_compare_and_write -i zero -D rand --lba 0 /dev/sdd Miscompare reported % hexdump -Cn 512 /dev/sdd 00000000 0f 0e 0d 0c 0b 0a 09 08 07 06 05 04 03 02 01 00 00000010 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 * 00000200 Rather than writing all-zeroes as instructed with the -D file, it corrupts the data in the sector by splicing some of the original bytes in. The page of the first entry of cmd->t_data_sg includes the CDB, and sg->offset is set to a position past the CDB. I presume that sg->offset is also the right choice to use for subsequent sglist members. Signed-off-by: Jan Engelhardt <jengelh@netitwork.de> Tested-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Nicholas Bellinger authored
commit 057085e5 upstream. This patch addresses a race + use after free where the first stage of COMPARE_AND_WRITE in compare_and_write_callback() is rescheduled after the backend sends the secondary WRITE, resulting in second stage compare_and_write_post() callback completing in target_complete_ok_work() before the first can return. Because current code depends on checking se_cmd->se_cmd_flags after return from se_cmd->transport_complete_callback(), this results in first stage having SCF_COMPARE_AND_WRITE_POST set, which incorrectly falls through into second stage CAW processing code, eventually triggering a NULL pointer dereference due to use after free. To address this bug, pass in a new *post_ret parameter into se_cmd->transport_complete_callback(), and depend upon this value instead of ->se_cmd_flags to determine when to return or fall through into ->queue_status() code for CAW. Cc: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> [ luis: backported to 3.16: adjusted context ] Signed-off-by: Luis Henriques <luis.henriques@canonical.com> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Nicholas Bellinger authored
commit ca82c2bd upstream. This patch addresses a case where iscsi_target_do_tx_login_io() fails sending the last login response PDU, after the RX/TX threads have already been started. The case centers around iscsi_target_rx_thread() not invoking allow_signal(SIGINT) before the send_sig(SIGINT, ...) occurs from the failure path, resulting in RX thread hanging indefinately on iscsi_conn->rx_login_comp. Note this bug is a regression introduced by: commit e5419865 Author: Nicholas Bellinger <nab@linux-iscsi.org> Date: Wed Jul 22 23:14:19 2015 -0700 iscsi-target: Fix iscsit_start_kthreads failure OOPs To address this bug, complete ->rx_login_complete for good measure in the failure path, and immediately return from RX thread context if connection state did not actually reach full feature phase (TARG_CONN_STATE_LOGGED_IN). Cc: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Boris Ostrovsky authored
commit 9c17d965 upstream. Doing so will cause the grant to be unmapped and then, during fault handling, the fault to be mistakenly treated as NUMA hint fault. In addition, even if those maps could partcipate in NUMA balancing, it wouldn't provide any benefit since we are unable to determine physical page's node (even if/when VNUMA is implemented). Marking grant maps' VMAs as VM_IO will exclude them from being part of NUMA balancing. Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Jeff Layton authored
commit c812012f upstream. If we pass in an empty nfs_fattr struct to nfs_update_inode, it will (correctly) not update any of the attributes, but it then clears the NFS_INO_INVALID_ATTR flag, which indicates that the attributes are up to date. Don't clear the flag if the fattr struct has no valid attrs to apply. Reviewed-by: Steve French <steve.french@primarydata.com> Signed-off-by: Jeff Layton <jeff.layton@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> [ luis: backported to 3.16: adjusted context ] Signed-off-by: Luis Henriques <luis.henriques@canonical.com> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Alex Deucher authored
commit 9c565e33 upstream. "Could not force DPM to low", etc. is usually harmless and just confuses users. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
David Sterba authored
commit 9dcbeed4 upstream. The calculation of range length in btrfs_sync_file leads to signed overflow. This was caught by PaX gcc SIZE_OVERFLOW plugin. https://forums.grsecurity.net/viewtopic.php?f=1&t=4284 The fsync call passes 0 and LLONG_MAX, the range length does not fit to loff_t and overflows, but the value is converted to u64 so it silently works as expected. The minimal fix is a typecast to u64, switching functions to take (start, end) instead of (start, len) would be more intrusive. Coccinelle script found that there's one more opencoded calculation of the length. <smpl> @@ loff_t start, end; @@ * end - start </smpl> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Chris Mason <clm@fb.com> [ kamal: backport to 3.13-stable: use len in both btrfs_wait_ordered_range calls, like b659ef02 Btrfs: avoid syncing log in the fast fsync path when not necessary ] Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Quentin Casasnovas authored
commit 8c7188b2 upstream. Sasha's found a NULL pointer dereference in the RDS connection code when sending a message to an apparently unbound socket. The problem is caused by the code checking if the socket is bound in rds_sendmsg(), which checks the rs_bound_addr field without taking a lock on the socket. This opens a race where rs_bound_addr is temporarily set but where the transport is not in rds_bind(), leading to a NULL pointer dereference when trying to dereference 'trans' in __rds_conn_create(). Vegard wrote a reproducer for this issue, so kindly ask him to share if you're interested. I cannot reproduce the NULL pointer dereference using Vegard's reproducer with this patch, whereas I could without. Complete earlier incomplete fix to CVE-2015-6937: 74e98eb0 ("RDS: verify the underlying transport exists before creating a connection") Cc: David S. Miller <davem@davemloft.net> Reviewed-by: Vegard Nossum <vegard.nossum@oracle.com> Reviewed-by: Sasha Levin <sasha.levin@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: Quentin Casasnovas <quentin.casasnovas@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Alex Deucher authored
commit 4e7697ed upstream. On some cards it takes a relatively long time for the change to take place. Make a timeout non-fatal. bug: https://bugs.freedesktop.org/show_bug.cgi?id=76130Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-