- 23 Sep, 2008 12 commits
-
-
Jaswinder Singh authored
Firmware blob looks like this... __le16 load_address unsigned char data[] [akpm@linux-foundation.org: include vmalloc.h] Signed-off-by:Jaswinder Singh <jaswinder@infradead.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Julia Lawall authored
The break after the return serves no purpose. Signed-off-by:
Julia Lawall <julia@diku.dk> Reviewed-by:
Richard Genoud <richard.genoud@gmail.com> Signed-off-by:
-
Julia Lawall authored
The kernel.h macro DIV_ROUND_UP performs the computation (((n) + (d) - 1) / (d)) but is perhaps more readable. An extract of the semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @haskernel@ @@ #include <linux/kernel.h> @depends on haskernel@ expression n,d; @@ ( - (n + d - 1) / d + DIV_ROUND_UP(n,d) | - (n + (d - 1)) / d + DIV_ROUND_UP(n,d) ) @depends on haskernel@ expression n,d; @@ - DIV_ROUND_UP((n),d) + DIV_ROUND_UP(n,d) @depends on haskernel@ expression n,d; @@ - DIV_ROUND_UP(n,(d)) + DIV_ROUND_UP(n,d) // </smpl> Signed-off-by:
-
Julia Lawall authored
The kernel.h macro DIV_ROUND_UP performs the computation (((n) + (d) - 1) / (d)) but is perhaps more readable. In the case of the file drivers/atm/eni.c, I am a little bit suspicious of the -1 at the end of the affected expression. Please check that that is what is wanted. An extract of the semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @haskernel@ @@ #include <linux/kernel.h> @depends on haskernel@ expression n,d; @@ ( - (n + d - 1) / d + DIV_ROUND_UP(n,d) | - (n + (d - 1)) / d + DIV_ROUND_UP(n,d) ) @depends on haskernel@ expression n,d; @@ - DIV_ROUND_UP((n),d) + DIV_ROUND_UP(n,d) @depends on haskernel@ expression n,d; @@ - DIV_ROUND_UP(n,(d)) + DIV_ROUND_UP(n,d) // </smpl> Signed-off-by:
-
Ming Lei authored
smp_mb is enough for ordering memory operations among processors,and mb is more expensive than smp_mb for UP machine, so replace it with smp_mb(). Signed-off-by:
Ming Lei <tom.leiming@gmail.com> Acked-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
Harvey Harrison authored
Signed-off-by:
Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by:
-
Bjorn Helgaas authored
Use "[%04x:%04x]" for PCI vendor/device IDs to follow the format used by lspci(8). Signed-off-by:
Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by:
-
Andi Kleen authored
- Remove noop VFS stubs. The VFS does that on a NULL pointer anyways. - Fix timer handler prototype to be correct - Comment ugly SMP race I didn't fix. Signed-off-by:
Andi Kleen <ak@linux.intel.com> Signed-off-by:
-
Harvey Harrison authored
Signed-off-by:
-
Harvey Harrison authored
Found two possible bugs where the z1 value was used directly without byteswapping. Signed-off-by:
-
Julia Lawall authored
After calling capi_ctr_get, error handling code should call capi_ctr_put. The semantic match that finds this problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @r@ expression x,E; statement S; position p1,p2,p3; @@ ( if ((x = capi_ctr_get@p1(...)) == NULL || ...) S | x = capi_ctr_get@p1(...) ... when != x if (x == NULL || ...) S ) <... if@p3 (...) { ... when != capi_ctr_put(x) when != if (x) { ... capi_ctr_put(x); ...} return@p2 ...; } ...> ( return x; | return 0; | x = E | E = x | capi_ctr_put(x) ) @exists@ position r.p1,r.p2,r.p3; expression x; int ret != 0; statement S; @@ * x = capi_ctr_get@p1(...) <... * if@p3 (...) S ...> * return@p2 \(NULL\|ret\); // </smpl> Signed-off-by:
-
Kaihui Luo authored
The function localtime_3 in xt_time.c gives a wrong monthday in a leap year after 28th 2. calculating monthday should use the array days_since_leapyear[] not days_since_year[] in a leap year. Signed-off-by:
Kaihui Luo <kaih.luo@gmail.com> Acked-by:
Jan Engelhardt <jengelh@computergmbh.de> Signed-off-by:
-
- 22 Sep, 2008 7 commits
-
-
David S. Miller authored
Signed-off-by: -
David S. Miller authored
Signed-off-by: -
David S. Miller authored
Signed-off-by: -
David S. Miller authored
Signed-off-by: -
David S. Miller authored
This will be used by subsequent changesets. Signed-off-by: -
David S. Miller authored
Signed-off-by: -
David S. Miller authored
This minor cleanup simplifies later changes which will convert struct sk_buff and friends over to using struct list_head. Signed-off-by:
-
- 21 Sep, 2008 18 commits
-
-
Tom Quetchenbach authored
I'm trying to use the TCP_MAXSEG option to setsockopt() to set the MSS for both sides of a bidirectional connection. man tcp says: "If this option is set before connection establishment, it also changes the MSS value announced to the other end in the initial packet." However, the kernel only uses the MTU/route cache to set the advertised MSS. That means if I set the MSS to, say, 500 before calling connect(), I will send at most 500-byte packets, but I will still receive 1500-byte packets in reply. This is a bug, either in the kernel or the documentation. This patch (applies to latest net-2.6) reduces the advertised value to that requested by the user as long as setsockopt() is called before connect() or accept(). This seems like the behavior that one would expect as well as that which is documented. I've tried to make sure that things that depend on the advertised MSS are set correctly. Signed-off-by:
Tom Quetchenbach <virtualphtn@gmail.com> Signed-off-by:
-
Arnaldo Carvalho de Melo authored
Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Alexander Duyck authored
Currently dequeueing a packet and requeueing the same packet will cause a different packet to be pulled on the next dequeue. This change forces requeue to rewind the current_band. Signed-off-by:
Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by:
-
Ilpo Järvinen authored
If lost skb is sacked, we might have nothing to retransmit as high as the retransmit_high is pointing to, so place it lower to avoid unnecessary walking. This is mainly for the case where high L'ed skbs gets sacked. Signed-off-by:
Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by:
-
Ilpo Järvinen authored
Most importantly avoid doing it with cumulative ACK. However, since we have lost_cnt_hint in the picture as well needing adjustments, it's not as trivial as dealing with retransmit_skb_hint (and cannot be done in the all place we could trivially leave retransmit_skb_hint untouched). With the previous patch, this should mostly remove O(n^2) behavior while cumulative ACKs start flowing once rexmit after a lossy round-trip made it through. Signed-off-by:
-
Ilpo Järvinen authored
Most importantly avoid doing it with cumulative ACK. Not clearing means that we no longer need n^2 processing in resolution of each fast recovery. Signed-off-by:
-
Ilpo Järvinen authored
This doesn't much sense here afaict, probably never has. Since fragmenting and collapsing deal the hints by themselves, there should be very little reason for the rexmit loop to do that. Signed-off-by:
-
Ilpo Järvinen authored
Both loops are quite similar, so they can be combined with little effort. As a result, forward_skb_hint becomes obsolete as well. Signed-off-by:
-
Ilpo Järvinen authored
The validity of the retransmit_high must then be ensured if no L'ed skb exits! This makes a minor change to behavior, we now have to iterate the head to find out that the loop terminates. Signed-off-by:
-
Ilpo Järvinen authored
Signed-off-by:
-
Ilpo Järvinen authored
Signed-off-by:
-
Ilpo Järvinen authored
Signed-off-by:
-
Ilpo Järvinen authored
Because lost counter no longer requires tuning, this is trivial to remove (the tuning wouldn't have been too hard either) because no "new" retransmittable skb appeared below retransmit_skb_hint when SACKing for sure. Signed-off-by:
-
Ilpo Järvinen authored
I suspect it might have been related to the changed amount of lost skbs, which was counted by retransmit_cnt_hint that got changed. The place for this clearing was very illogical anyway, it should have been after the LOST-bit clearing loop to make any sense. Signed-off-by:
-
Ilpo Järvinen authored
Main benefit in this is that we can then freely point the retransmit_skb_hint to anywhere we want to because there's no longer need to know what would be the count changes involve, and since this is really used only as a terminator, unnecessary work is one time walk at most, and if some retransmissions are necessary after that point later on, the walk is not full waste of time anyway. Since retransmit_high must be kept valid, all lost markers must ensure that. Now I also have learned how those "holes" in the rexmittable skbs can appear, mtu probe does them. So I removed the misleading comment as well. Signed-off-by:
-
Ilpo Järvinen authored
This useful because we'd need to verifying soon in many places which makes things slightly more complex than it used to be. Signed-off-by:
-
Ilpo Järvinen authored
Signed-off-by:
-
Ilpo Järvinen authored
Ie., the difference between partial and all clearing doesn't exists anymore since the SACK optimizations got dropped by an sacktag rewrite. Signed-off-by:
-
- 19 Sep, 2008 3 commits
-
-
-
David S. Miller authored
Fixes the following build warning: drivers/net/qlge/qlge_main.c:3897: warning: ‘qlge_resume’ defined but not used Signed-off-by: -
David S. Miller authored
drivers/net/qlge/qlge_dbg.c: In function ‘ql_dump_qdev’: drivers/net/qlge/qlge_dbg.c:369: warning: cast to pointer from integer of different size drivers/net/qlge/qlge_dbg.c:373: warning: cast to pointer from integer of different size drivers/net/qlge/qlge_dbg.c: In function ‘ql_dump_tx_ring’: drivers/net/qlge/qlge_dbg.c:457: warning: format ‘%llx’ expects type ‘long long unsigned int’, but argument 2 has type ‘long unsigned int’ drivers/net/qlge/qlge_dbg.c:461: warning: format ‘%llx’ expects type ‘long long unsigned int’, but argument 2 has type ‘long unsigned int’ drivers/net/qlge/qlge_dbg.c: In function ‘ql_dump_rx_ring’: drivers/net/qlge/qlge_dbg.c:557: warning: format ‘%llx’ expects type ‘long long unsigned int’, but argument 2 has type ‘long unsigned int’ drivers/net/qlge/qlge_dbg.c:565: warning: format ‘%llx’ expects type ‘long long unsigned int’, but argument 2 has type ‘long unsigned int’ drivers/net/qlge/qlge_dbg.c:575: warning: format ‘%llx’ expects type ‘long long unsigned int’, but argument 2 has type ‘long unsigned int’ drivers/net/qlge/qlge_dbg.c:579: warning: format ‘%llx’ expects type ‘long long unsigned int’, but argument 2 has type ‘long unsigned int’ drivers/net/qlge/qlge_dbg.c:598: warning: format ‘%llx’ expects type ‘long long unsigned int’, but argument 2 has type ‘long unsigned int’ drivers/net/qlge/qlge_dbg.c:602: warning: format ‘%llx’ expects type ‘long long unsigned int’, but argument 2 has type ‘long unsigned int’ Signed-off-by:
-
