Commit 2210731e authored by petr@outpost.site's avatar petr@outpost.site

Merge pchardin@bk-internal.mysql.com:/home/bk/mysql-5.1

into  mysql.com:/home/cps/mysql/devel/5.1-csv-remove-mmap
parents 32c45f92 cde3d7d8
......@@ -4944,10 +4944,10 @@ val
UPDATE bug13894 SET val=6 WHERE val=10;
SELECT * FROM bug13894;
val
5
11
6
6
5
11
DROP TABLE bug13894;
DROP TABLE IF EXISTS bug14672;
CREATE TABLE bug14672 (c1 integer) engine = CSV;
......
......@@ -61,7 +61,7 @@ TODO:
/* The file extension */
#define CSV_EXT ".CSV" // The data file
#define CSN_EXT ".CSN" // Files used during repair
#define CSN_EXT ".CSN" // Files used during repair and update
#define CSM_EXT ".CSM" // Meta file
......@@ -77,6 +77,53 @@ static int tina_init= 0;
static handler *tina_create_handler(TABLE_SHARE *table, MEM_ROOT *mem_root);
static int tina_init_func();
off_t Transparent_file::read_next()
{
off_t bytes_read;
/*
No need to seek here, as the file managed by Transparent_file class
always points to upper_bound byte
*/
if ((bytes_read= my_read(filedes, buff, buff_size, MYF(0))) == MY_FILE_ERROR)
return -1;
/* end of file */
if (!bytes_read)
return -1;
lower_bound= upper_bound;
upper_bound+= bytes_read;
return lower_bound;
}
char Transparent_file::get_value(off_t offset)
{
off_t bytes_read;
/* check boundaries */
if ((lower_bound <= offset) && (offset < upper_bound))
return buff[offset - lower_bound];
else
{
VOID(my_seek(filedes, offset, MY_SEEK_SET, MYF(0)));
/* read appropriate portion of the file */
if ((bytes_read= my_read(filedes, buff, buff_size,
MYF(0))) == MY_FILE_ERROR)
return 0;
lower_bound= offset;
upper_bound= lower_bound + bytes_read;
/* end of file */
if (upper_bound == offset)
return 0;
return buff[0];
}
}
handlerton tina_hton;
/*****************************************************************************
......@@ -92,7 +139,7 @@ int sort_set (tina_set *a, tina_set *b)
We assume that intervals do not intersect. So, it is enought to compare
any two points. Here we take start of intervals for comparison.
*/
return ( a->begin > b->begin ? -1 : ( a->begin < b->begin ? 1 : 0 ) );
return ( a->begin > b->begin ? 1 : ( a->begin < b->begin ? -1 : 0 ) );
}
static byte* tina_get_key(TINA_SHARE *share,uint *length,
......@@ -102,55 +149,6 @@ static byte* tina_get_key(TINA_SHARE *share,uint *length,
return (byte*) share->table_name;
}
/*
Reloads the mmap file.
*/
int get_mmap(TINA_SHARE *share, int write)
{
DBUG_ENTER("ha_tina::get_mmap");
#ifdef __NETWARE__
my_message(errno, "Sorry, no mmap() on Netware", 0);
DBUG_ASSERT(0);
DBUG_RETURN(1);
#else
if (share->mapped_file && my_munmap(share->mapped_file,
share->file_stat.st_size))
DBUG_RETURN(1);
if (my_fstat(share->data_file, &share->file_stat, MYF(MY_WME)) == -1)
DBUG_RETURN(1);
if (share->file_stat.st_size)
{
if (write)
share->mapped_file= (byte *)my_mmap(NULL, share->file_stat.st_size,
PROT_READ|PROT_WRITE, MAP_SHARED,
share->data_file, 0);
else
share->mapped_file= (byte *)my_mmap(NULL, share->file_stat.st_size,
PROT_READ, MAP_PRIVATE,
share->data_file, 0);
if ((share->mapped_file == MAP_FAILED))
{
/*
Bad idea you think? See the problem is that nothing actually checks
the return value of ::rnd_init(), so tossing an error is about
it for us.
Never going to happen right? :)
*/
my_message(errno, "Woops, blew up opening a mapped file", 0);
DBUG_ASSERT(0);
DBUG_RETURN(1);
}
}
else
share->mapped_file= NULL;
DBUG_RETURN(0);
#endif /* __NETWARE__ */
}
static int tina_init_func()
{
if (!tina_init)
......@@ -191,6 +189,7 @@ static TINA_SHARE *get_share(const char *table_name, TABLE *table)
{
TINA_SHARE *share;
char meta_file_name[FN_REFLEN];
MY_STAT file_stat; /* Stat information for the data file */
char *tmp_name;
uint length;
......@@ -223,6 +222,8 @@ static TINA_SHARE *get_share(const char *table_name, TABLE *table)
share->table_name= tmp_name;
share->crashed= FALSE;
share->rows_recorded= 0;
share->update_file_opened= FALSE;
share->tina_write_opened= FALSE;
strmov(share->table_name, table_name);
fn_format(share->data_file_name, table_name, "", CSV_EXT,
MY_REPLACE_EXT|MY_UNPACK_FILENAME);
......@@ -244,33 +245,21 @@ static TINA_SHARE *get_share(const char *table_name, TABLE *table)
share->crashed= TRUE;
/*
After we read, we set the file to dirty. When we close, we will do the
opposite. If the meta file will not open we assume it is crashed and
If the meta file will not open we assume it is crashed and
mark it as such.
*/
if (read_meta_file(share->meta_file, &share->rows_recorded))
share->crashed= TRUE;
else
(void)write_meta_file(share->meta_file, share->rows_recorded, TRUE);
if ((share->data_file= my_open(share->data_file_name, O_RDWR|O_APPEND,
MYF(0))) == -1)
if (my_stat(share->data_file_name, &file_stat, MYF(MY_WME)) == NULL)
goto error2;
share->mapped_file= NULL; // We don't know the state as we just allocated it
if (get_mmap(share, 0) > 0)
goto error3;
/* init file length value used by readers */
share->saved_data_file_length= share->file_stat.st_size;
share->saved_data_file_length= file_stat.st_size;
}
share->use_count++;
pthread_mutex_unlock(&tina_mutex);
return share;
error3:
my_close(share->data_file,MYF(0));
error2:
thr_lock_delete(&share->lock);
pthread_mutex_destroy(&share->mutex);
......@@ -398,6 +387,30 @@ bool ha_tina::check_and_repair(THD *thd)
}
int ha_tina::init_tina_writer()
{
DBUG_ENTER("ha_tina::init_tina_writer");
/*
Mark the file as crashed. We will set the flag back when we close
the file. In the case of the crash it will remain marked crashed,
which enforce recovery.
*/
(void)write_meta_file(share->meta_file, share->rows_recorded, TRUE);
if ((share->tina_write_filedes=
my_open(share->data_file_name, O_RDWR|O_APPEND, MYF(0))) == -1)
{
DBUG_PRINT("info", ("Could not open tina file writes"));
share->crashed= TRUE;
DBUG_RETURN(1);
}
share->tina_write_opened= TRUE;
DBUG_RETURN(0);
}
bool ha_tina::is_crashed() const
{
DBUG_ENTER("ha_tina::is_crashed");
......@@ -418,10 +431,13 @@ static int free_share(TINA_SHARE *share)
share->crashed ? TRUE :FALSE);
if (my_close(share->meta_file, MYF(0)))
result_code= 1;
if (share->mapped_file)
my_munmap(share->mapped_file, share->file_stat.st_size);
share->mapped_file= NULL;
result_code= my_close(share->data_file,MYF(0));
if (share->tina_write_opened)
{
if (my_close(share->tina_write_filedes, MYF(0)))
result_code= 1;
share->tina_write_opened= FALSE;
}
hash_delete(&tina_open_tables, (byte*) share);
thr_lock_delete(&share->lock);
pthread_mutex_destroy(&share->mutex);
......@@ -437,30 +453,41 @@ int tina_end(ha_panic_function type)
return tina_done_func();
}
/*
Finds the end of a line.
Supports DOS, Unix, or Mac OS line endings.
This function finds the end of a line and returns the length
of the line ending.
We support three kinds of line endings:
'\r' -- Old Mac OS line ending
'\n' -- Traditional Unix and Mac OS X line ending
'\r''\n' -- DOS\Windows line ending
*/
byte * find_eoln(byte *data, off_t begin, off_t end, int *eoln_len)
off_t find_eoln_buff(Transparent_file *data_buff, off_t begin,
off_t end, int *eoln_len)
{
off_t dataend= begin;
*eoln_len= 0;
for (off_t x= begin; x < end; x++)
if (data[x] == '\r' || data[x] == '\n')
(*eoln_len)++;
else if (!(*eoln_len))
dataend++;
{
/* Unix (includes Mac OS X) */
if (data_buff->get_value(x) == '\n')
*eoln_len= 1;
else
return data+dataend;
if (data_buff->get_value(x) == '\r') // Mac or Dos
{
/* old Mac line ending */
if (x + 1 == end || (data_buff->get_value(x + 1) != '\n'))
*eoln_len= 1;
else // DOS style ending
*eoln_len= 2;
}
if (*eoln_len) // end of line was found
return x;
}
/*
if we only have one record in the file then our for loop will break
before we return. we should still have seen end of line markers and
so we just return the line here
*/
if (*eoln_len > 0)
return data+dataend;
return 0;
}
......@@ -478,12 +505,13 @@ ha_tina::ha_tina(TABLE_SHARE *table_arg)
They are not probably completely right.
*/
current_position(0), next_position(0), local_saved_data_file_length(0),
chain_alloced(0), chain_size(DEFAULT_CHAIN_LENGTH),
file_buff(0), chain_alloced(0), chain_size(DEFAULT_CHAIN_LENGTH),
records_is_known(0)
{
/* Set our original buffers from pre-allocated memory */
buffer.set((char*)byte_buffer, IO_SIZE, system_charset_info);
chain= chain_buffer;
file_buff= new Transparent_file();
}
......@@ -609,20 +637,18 @@ int ha_tina::chain_append()
*/
int ha_tina::find_current_row(byte *buf)
{
byte *mapped_ptr;
byte *end_ptr;
off_t end_offset, curr_offset= current_position;
int eoln_len;
my_bitmap_map *org_bitmap;
DBUG_ENTER("ha_tina::find_current_row");
mapped_ptr= (byte *)share->mapped_file + current_position;
/*
We do not read further then local_saved_data_file_length in order
not to conflict with undergoing concurrent insert.
*/
if ((end_ptr= find_eoln(share->mapped_file, current_position,
local_saved_data_file_length, &eoln_len)) == 0)
if ((end_offset=
find_eoln_buff(file_buff, current_position,
local_saved_data_file_length, &eoln_len)) == 0)
DBUG_RETURN(HA_ERR_END_OF_FILE);
/* Avoid asserts in ::store() for columns that are not going to be updated */
......@@ -631,36 +657,39 @@ int ha_tina::find_current_row(byte *buf)
for (Field **field=table->field ; *field ; field++)
{
buffer.length(0);
if (*mapped_ptr == '"')
mapped_ptr++; // Increment past the first quote
if (file_buff->get_value(curr_offset) == '"')
curr_offset++; // Incrementpast the first quote
else
{
dbug_tmp_restore_column_map(table->write_set, org_bitmap);
DBUG_RETURN(HA_ERR_CRASHED_ON_USAGE);
}
for(;mapped_ptr != end_ptr; mapped_ptr++)
for(;curr_offset != end_offset; curr_offset++)
{
// Need to convert line feeds!
if (*mapped_ptr == '"' &&
(((mapped_ptr[1] == ',') && (mapped_ptr[2] == '"')) ||
(mapped_ptr == end_ptr -1 )))
if (file_buff->get_value(curr_offset) == '"' &&
(((file_buff->get_value(curr_offset + 1) == ',') &&
(file_buff->get_value(curr_offset + 2) == '"')) ||
(curr_offset == end_offset -1 )))
{
mapped_ptr += 2; // Move past the , and the "
curr_offset+= 2; // Move past the , and the "
break;
}
if (*mapped_ptr == '\\' && mapped_ptr != (end_ptr - 1))
if (file_buff->get_value(curr_offset) == '\\' &&
curr_offset != (end_offset - 1))
{
mapped_ptr++;
if (*mapped_ptr == 'r')
curr_offset++;
if (file_buff->get_value(curr_offset) == 'r')
buffer.append('\r');
else if (*mapped_ptr == 'n' )
else if (file_buff->get_value(curr_offset) == 'n' )
buffer.append('\n');
else if ((*mapped_ptr == '\\') || (*mapped_ptr == '"'))
buffer.append(*mapped_ptr);
else if ((file_buff->get_value(curr_offset) == '\\') ||
(file_buff->get_value(curr_offset) == '"'))
buffer.append(file_buff->get_value(curr_offset));
else /* This could only happed with an externally created file */
{
buffer.append('\\');
buffer.append(*mapped_ptr);
buffer.append(file_buff->get_value(curr_offset));
}
}
else // ordinary symbol
......@@ -669,18 +698,18 @@ int ha_tina::find_current_row(byte *buf)
We are at final symbol and no last quote was found =>
we are working with a damaged file.
*/
if (mapped_ptr == end_ptr -1)
if (curr_offset == end_offset - 1)
{
dbug_tmp_restore_column_map(table->write_set, org_bitmap);
DBUG_RETURN(HA_ERR_CRASHED_ON_USAGE);
}
buffer.append(*mapped_ptr);
buffer.append(file_buff->get_value(curr_offset));
}
}
if (bitmap_is_set(table->read_set, (*field)->field_index))
(*field)->store(buffer.ptr(), buffer.length(), system_charset_info);
}
next_position= (end_ptr - share->mapped_file)+eoln_len;
next_position= end_offset + eoln_len;
/* Maybe use \N for null? */
memset(buf, 0, table->s->null_bytes); /* We do not implement nulls! */
dbug_tmp_restore_column_map(table->write_set, org_bitmap);
......@@ -779,7 +808,7 @@ void ha_tina::get_status()
void ha_tina::update_status()
{
/* correct local_saved_data_file_length for writers */
share->saved_data_file_length= share->file_stat.st_size;
share->saved_data_file_length= local_saved_data_file_length;
}
......@@ -830,6 +859,9 @@ int ha_tina::open(const char *name, int mode, uint open_options)
DBUG_RETURN(HA_ERR_CRASHED_ON_USAGE);
}
if ((data_file= my_open(share->data_file_name, O_RDONLY, MYF(0))) == -1)
DBUG_RETURN(0);
/*
Init locking. Pass handler object to the locking routines,
so that they could save/update local_saved_data_file_length value
......@@ -848,12 +880,14 @@ int ha_tina::open(const char *name, int mode, uint open_options)
/*
Close a database file. We remove ourselves from the shared strucutre.
If it is empty we destroy it and free the mapped file.
If it is empty we destroy it.
*/
int ha_tina::close(void)
{
int rc= 0;
DBUG_ENTER("ha_tina::close");
DBUG_RETURN(free_share(share));
rc= my_close(data_file, MYF(0));
DBUG_RETURN(free_share(share) || rc);
}
/*
......@@ -876,22 +910,17 @@ int ha_tina::write_row(byte * buf)
size= encode_quote(buf);
if (my_write(share->data_file, (byte*)buffer.ptr(), size,
MYF(MY_WME | MY_NABP)))
DBUG_RETURN(-1);
if (!share->tina_write_opened)
if (init_tina_writer())
DBUG_RETURN(-1);
/*
Ok, this is means that we will be doing potentially bad things
during a bulk insert on some OS'es. What we need is a cleanup
call for ::write_row that would let us fix up everything after the bulk
insert. The archive handler does this with an extra mutx call, which
might be a solution for this.
*/
if (get_mmap(share, 0) > 0)
/* use pwrite, as concurrent reader could have changed the position */
if (my_write(share->tina_write_filedes, (byte*)buffer.ptr(), size,
MYF(MY_WME | MY_NABP)))
DBUG_RETURN(-1);
/* update local copy of the max position to see our own changes */
local_saved_data_file_length= share->file_stat.st_size;
local_saved_data_file_length+= size;
/* update shared info */
pthread_mutex_lock(&share->mutex);
......@@ -906,6 +935,23 @@ int ha_tina::write_row(byte * buf)
}
int ha_tina::open_update_temp_file_if_needed()
{
char updated_fname[FN_REFLEN];
if (!share->update_file_opened)
{
if ((update_temp_file=
my_create(fn_format(updated_fname, share->table_name,
"", CSN_EXT,
MY_REPLACE_EXT | MY_UNPACK_FILENAME),
0, O_RDWR | O_TRUNC, MYF(MY_WME))) < 0)
return 1;
share->update_file_opened= TRUE;
}
return 0;
}
/*
This is called for an update.
Make sure you put in code to increment the auto increment, also
......@@ -929,16 +975,16 @@ int ha_tina::update_row(const byte * old_data, byte * new_data)
if (chain_append())
DBUG_RETURN(-1);
if (my_write(share->data_file, (byte*)buffer.ptr(), size,
if (open_update_temp_file_if_needed())
DBUG_RETURN(-1);
if (my_write(update_temp_file, (byte*)buffer.ptr(), size,
MYF(MY_WME | MY_NABP)))
DBUG_RETURN(-1);
/* UPDATE should never happen on the log tables */
DBUG_ASSERT(!share->is_log_table);
/* update local copy of the max position to see our own changes */
local_saved_data_file_length= share->file_stat.st_size;
DBUG_RETURN(0);
}
......@@ -1004,6 +1050,8 @@ int ha_tina::rnd_init(bool scan)
{
DBUG_ENTER("ha_tina::rnd_init");
/* set buffer to the beginning of the file */
file_buff->init_buff(data_file);
if (share->crashed)
DBUG_RETURN(HA_ERR_CRASHED_ON_USAGE);
......@@ -1011,11 +1059,6 @@ int ha_tina::rnd_init(bool scan)
stats.records= 0;
records_is_known= 0;
chain_ptr= chain;
#ifdef HAVE_MADVISE
if (scan)
(void) madvise(share->mapped_file, share->file_stat.st_size,
MADV_SEQUENTIAL);
#endif
DBUG_RETURN(0);
}
......@@ -1045,8 +1088,11 @@ int ha_tina::rnd_next(byte *buf)
ha_statistic_increment(&SSV::ha_read_rnd_next_count);
current_position= next_position;
if (!share->mapped_file)
/* don't scan an empty file */
if (!local_saved_data_file_length)
DBUG_RETURN(HA_ERR_END_OF_FILE);
if ((rc= find_current_row(buf)))
DBUG_RETURN(rc);
......@@ -1115,6 +1161,22 @@ int ha_tina::extra(enum ha_extra_function operation)
DBUG_RETURN(0);
}
/*
Set end_pos to the last valid byte of continuous area, closest
to the given "hole", stored in the buffer. "Valid" here means,
not listed in the chain of deleted records ("holes").
*/
bool ha_tina::get_write_pos(off_t *end_pos, tina_set *closest_hole)
{
if (closest_hole == chain_ptr) /* no more chains */
*end_pos= file_buff->end();
else
*end_pos= min(file_buff->end(),
closest_hole->begin);
return (closest_hole != chain_ptr) && (*end_pos == closest_hole->begin);
}
/*
Called after each table scan. In particular after deletes,
and updates. In the last case we employ chain of deleted
......@@ -1123,53 +1185,107 @@ int ha_tina::extra(enum ha_extra_function operation)
*/
int ha_tina::rnd_end()
{
char updated_fname[FN_REFLEN];
off_t file_buffer_start= 0;
DBUG_ENTER("ha_tina::rnd_end");
records_is_known= 1;
/* First position will be truncate position, second will be increment */
if ((chain_ptr - chain) > 0)
{
tina_set *ptr;
size_t length;
tina_set *ptr= chain;
/*
Setting up writable map, this will contain all of the data after the
get_mmap call that we have added to the file.
Re-read the beginning of a file (as the buffer should point to the
end of file after the scan).
*/
if (get_mmap(share, 1) > 0)
DBUG_RETURN(-1);
length= share->file_stat.st_size;
file_buff->init_buff(data_file);
/*
The sort handles updates/deletes with random orders.
It also sorts so that we move the final blocks to the
beginning so that we move the smallest amount of data possible.
The sort is needed when there were updates/deletes with random orders.
It sorts so that we move the firts blocks to the beginning.
*/
qsort(chain, (size_t)(chain_ptr - chain), sizeof(tina_set),
(qsort_cmp)sort_set);
for (ptr= chain; ptr < chain_ptr; ptr++)
off_t write_begin= 0, write_end;
/* create the file to write updated table if it wasn't yet created */
if (open_update_temp_file_if_needed())
DBUG_RETURN(-1);
/* write the file with updated info */
while ((file_buffer_start != -1)) // while not end of file
{
memmove(share->mapped_file + ptr->begin, share->mapped_file + ptr->end,
length - (size_t)ptr->end);
length= length - (size_t)(ptr->end - ptr->begin);
bool in_hole= get_write_pos(&write_end, ptr);
/* if there is something to write, write it */
if ((write_end - write_begin) &&
(my_write(update_temp_file,
(byte*)(file_buff->ptr() +
(write_begin - file_buff->start())),
write_end - write_begin, MYF_RW)))
goto error;
if (in_hole)
{
/* skip hole */
while (file_buff->end() <= ptr->end && file_buffer_start != -1)
file_buffer_start= file_buff->read_next();
write_begin= ptr->end;
ptr++;
}
else
write_begin= write_end;
if (write_end == file_buff->end())
file_buffer_start= file_buff->read_next(); /* shift the buffer */
}
/* Unmap the file before the new size is set */
if (my_munmap(share->mapped_file, share->file_stat.st_size))
if (my_sync(update_temp_file, MYF(MY_WME)) ||
my_close(update_temp_file, MYF(0)))
DBUG_RETURN(-1);
/* We set it to null so that get_mmap() won't try to unmap it */
share->mapped_file= NULL;
/* Set the file to the new size */
if (my_chsize(share->data_file, length, 0, MYF(MY_WME)))
share->update_file_opened= FALSE;
if (share->tina_write_opened)
{
if (my_close(share->tina_write_filedes, MYF(0)))
DBUG_RETURN(-1);
/*
Mark that the writer fd is closed, so that init_tina_writer()
will reopen it later.
*/
share->tina_write_opened= FALSE;
}
/*
Close opened fildes's. Then move updated file in place
of the old datafile.
*/
if (my_close(data_file, MYF(0)) ||
my_rename(fn_format(updated_fname, share->table_name, "", CSN_EXT,
MY_REPLACE_EXT | MY_UNPACK_FILENAME),
share->data_file_name, MYF(0)))
DBUG_RETURN(-1);
if (get_mmap(share, 0) > 0)
/* Open the file again */
if (((data_file= my_open(share->data_file_name, O_RDONLY, MYF(0))) == -1))
DBUG_RETURN(-1);
/*
The datafile is consistent at this point and the write filedes is
closed, so nothing worrying will happen to it in case of a crash.
Here we record this fact to the meta-file.
*/
(void)write_meta_file(share->meta_file, share->rows_recorded, FALSE);
}
DBUG_RETURN(0);
error:
my_close(update_temp_file, MYF(0));
share->update_file_opened= FALSE;
DBUG_RETURN(-1);
}
......@@ -1198,10 +1314,11 @@ int ha_tina::repair(THD* thd, HA_CHECK_OPT* check_opt)
File repair_file;
int rc;
ha_rows rows_repaired= 0;
off_t write_begin= 0, write_end;
DBUG_ENTER("ha_tina::repair");
/* empty file */
if (!share->mapped_file)
if (!share->saved_data_file_length)
{
share->rows_recorded= 0;
goto end;
......@@ -1212,12 +1329,15 @@ int ha_tina::repair(THD* thd, HA_CHECK_OPT* check_opt)
if (!(buf= (byte*) my_malloc(table->s->reclength, MYF(MY_WME))))
DBUG_RETURN(HA_ERR_OUT_OF_MEM);
/* position buffer to the start of the file */
file_buff->init_buff(data_file);
/*
Local_saved_data_file_length is initialized during the lock phase.
Sometimes this is not getting executed before ::repair (e.g. for
the log tables). We set it manually here.
*/
local_saved_data_file_length= share->file_stat.st_size;
local_saved_data_file_length= share->saved_data_file_length;
/* set current position to the beginning of the file */
current_position= next_position= 0;
......@@ -1232,11 +1352,10 @@ int ha_tina::repair(THD* thd, HA_CHECK_OPT* check_opt)
if (rc == HA_ERR_END_OF_FILE)
{
/* All rows were read ok until end of file, the file does not need repair. */
/*
If rows_recorded != rows_repaired, we should update
rows_recorded value to the current amount of rows.
All rows were read ok until end of file, the file does not need repair.
If rows_recorded != rows_repaired, we should update rows_recorded value
to the current amount of rows.
*/
share->rows_recorded= rows_repaired;
goto end;
......@@ -1252,36 +1371,45 @@ int ha_tina::repair(THD* thd, HA_CHECK_OPT* check_opt)
0, O_RDWR | O_TRUNC,MYF(MY_WME))) < 0)
DBUG_RETURN(HA_ERR_CRASHED_ON_REPAIR);
if (my_write(repair_file, (byte*)share->mapped_file, current_position,
MYF(MY_NABP)))
DBUG_RETURN(HA_ERR_CRASHED_ON_USAGE);
my_close(repair_file, MYF(0));
file_buff->init_buff(data_file);
/* we just truncated the file up to the first bad row. update rows count. */
share->rows_recorded= rows_repaired;
if (my_munmap(share->mapped_file, share->file_stat.st_size))
DBUG_RETURN(-1);
/* We set it to null so that get_mmap() won't try to unmap it */
share->mapped_file= NULL;
/* write repaired file */
while (1)
{
write_end= min(file_buff->end(), current_position);
if ((write_end - write_begin) &&
(my_write(repair_file, (byte*)file_buff->ptr(),
write_end - write_begin, MYF_RW)))
DBUG_RETURN(-1);
write_begin= write_end;
if (write_end== current_position)
break;
else
file_buff->read_next(); /* shift the buffer */
}
/*
Close the "to"-file before renaming
On Windows one cannot rename a file, which descriptor
is still open. EACCES will be returned when trying to delete
the "to"-file in my_rename()
Close the files and rename repaired file to the datafile.
We have to close the files, as on Windows one cannot rename
a file, which descriptor is still open. EACCES will be returned
when trying to delete the "to"-file in my_rename().
*/
my_close(share->data_file,MYF(0));
if (my_rename(repaired_fname, share->data_file_name, MYF(0)))
if (my_close(data_file,MYF(0)) || my_close(repair_file, MYF(0)) ||
my_rename(repaired_fname, share->data_file_name, MYF(0)))
DBUG_RETURN(-1);
/* Open the file again, it should now be repaired */
if ((share->data_file= my_open(share->data_file_name, O_RDWR|O_APPEND,
MYF(0))) == -1)
if ((data_file= my_open(share->data_file_name, O_RDWR|O_APPEND,
MYF(0))) == -1)
DBUG_RETURN(-1);
if (get_mmap(share, 0) > 0)
DBUG_RETURN(-1);
/* Set new file size. The file size will be updated by ::update_status() */
local_saved_data_file_length= (size_t) current_position;
end:
share->crashed= FALSE;
......@@ -1300,17 +1428,12 @@ int ha_tina::delete_all_rows()
if (!records_is_known)
DBUG_RETURN(my_errno=HA_ERR_WRONG_COMMAND);
/* Unmap the file before the new size is set */
if (share->mapped_file && my_munmap(share->mapped_file,
share->file_stat.st_size))
DBUG_RETURN(-1);
share->mapped_file= NULL;
if (!share->tina_write_opened)
if (init_tina_writer())
DBUG_RETURN(-1);
/* Truncate the file to zero size */
rc= my_chsize(share->data_file, 0, 0, MYF(MY_WME));
if (get_mmap(share, 0) > 0)
DBUG_RETURN(-1);
rc= my_chsize(share->tina_write_filedes, 0, 0, MYF(MY_WME));
stats.records=0;
DBUG_RETURN(rc);
......@@ -1372,12 +1495,15 @@ int ha_tina::check(THD* thd, HA_CHECK_OPT* check_opt)
if (!(buf= (byte*) my_malloc(table->s->reclength, MYF(MY_WME))))
DBUG_RETURN(HA_ERR_OUT_OF_MEM);
/* position buffer to the start of the file */
file_buff->init_buff(data_file);
/*
Local_saved_data_file_length is initialized during the lock phase.
Check does not use store_lock in certain cases. So, we set it
manually here.
*/
local_saved_data_file_length= share->file_stat.st_size;
local_saved_data_file_length= share->saved_data_file_length;
/* set current position to the beginning of the file */
current_position= next_position= 0;
/* Read the file row-by-row. If everything is ok, repair is not needed. */
......
......@@ -29,15 +29,12 @@
typedef struct st_tina_share {
char *table_name;
char data_file_name[FN_REFLEN];
byte *mapped_file; /* mapped region of file */
uint table_name_length, use_count;
/*
Below flag is needed to make log tables work with concurrent insert.
For more details see comment to ha_tina::update_status.
*/
my_bool is_log_table;
MY_STAT file_stat; /* Stat information for the data file */
File data_file; /* Current open data file */
/*
Here we save the length of the file for readers. This is updated by
inserts, updates and deletes. The var is initialized along with the
......@@ -46,7 +43,10 @@ typedef struct st_tina_share {
off_t saved_data_file_length;
pthread_mutex_t mutex;
THR_LOCK lock;
bool update_file_opened;
bool tina_write_opened;
File meta_file; /* Meta file we use */
File tina_write_filedes; /* File handler for readers */
bool crashed; /* Meta file is crashed */
ha_rows rows_recorded; /* Number of rows in tables */
} TINA_SHARE;
......@@ -56,6 +56,49 @@ struct tina_set {
off_t end;
};
class Transparent_file
{
File filedes;
byte *buff; /* in-memory window to the file or mmaped area */
/* current window sizes */
off_t lower_bound;
off_t upper_bound;
uint buff_size;
public:
Transparent_file() : lower_bound(0), buff_size(IO_SIZE)
{ buff= (byte *) my_malloc(buff_size*sizeof(byte), MYF(MY_WME)); }
~Transparent_file()
{ my_free((gptr)buff, MYF(MY_ALLOW_ZERO_PTR)); }
void init_buff(File filedes_arg)
{
filedes= filedes_arg;
/* read the beginning of the file */
lower_bound= 0;
VOID(my_seek(filedes, 0, MY_SEEK_SET, MYF(0)));
if (filedes && buff)
upper_bound= my_read(filedes, buff, buff_size, MYF(0));
}
byte *ptr()
{ return buff; }
off_t start()
{ return lower_bound; }
off_t end()
{ return upper_bound; }
/* get a char from the given position in the file */
char get_value (off_t offset);
/* shift a buffer windows to see the next part of the file */
off_t read_next();
};
class ha_tina: public handler
{
THR_LOCK_DATA lock; /* MySQL lock */
......@@ -64,6 +107,9 @@ class ha_tina: public handler
off_t next_position; /* Next position in the file scan */
off_t local_saved_data_file_length; /* save position for reads */
byte byte_buffer[IO_SIZE];
Transparent_file *file_buff;
File data_file; /* File handler for readers */
File update_temp_file;
String buffer;
/*
The chain contains "holes" in the file, occured because of
......@@ -77,12 +123,19 @@ class ha_tina: public handler
uint32 chain_size;
bool records_is_known;
private:
bool get_write_pos(off_t *end_pos, tina_set *closest_hole);
int open_update_temp_file_if_needed();
int init_tina_writer();
public:
ha_tina(TABLE_SHARE *table_arg);
~ha_tina()
~ha_tina()
{
if (chain_alloced)
my_free((gptr)chain,0);
my_free((gptr)chain, 0);
if (file_buff)
delete file_buff;
}
const char *table_type() const { return "CSV"; }
const char *index_type(uint inx) { return "NONE"; }
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment