Skip to content

M
mariadb
Commit 30296dca authored by kostja@bodhi.(none)'s avatar kostja@bodhi.(none)
Browse files
Options

Merge bk-internal.mysql.com:/home/bk/mysql-5.1-27430 

into  bodhi.(none):/opt/local/work/mysql-5.1-27430
parents db705749 95ca5495
Show whitespace changes
Inline Side-by-side
Showing with 1218 additions and 42 deletions
mysql-test/r/ps_ddl.result
View file @ 30296dca
......@@ -35,6 +35,7 @@ Part 3: NOTHING -> VIEW transitions
=====================================================================
Part 4: TABLE -> NOTHING transitions
=====================================================================
# Test 4-a: select ... from <table>
create table t1 (a int);
prepare stmt from "select * from t1";
execute stmt;
......@@ -59,6 +60,32 @@ call p_verify_reprepare_count(0);
SUCCESS
deallocate prepare stmt;
# Test 4-b: TABLE -> NOTHING by renaming the table
create table t1 (a int);
prepare stmt from "select * from t1";
execute stmt;
a
call p_verify_reprepare_count(0);
SUCCESS
execute stmt;
a
call p_verify_reprepare_count(0);
SUCCESS
rename table t1 to t2;
execute stmt;
ERROR 42S02: Table 'test.t1' doesn't exist
call p_verify_reprepare_count(0);
SUCCESS
execute stmt;
ERROR 42S02: Table 'test.t1' doesn't exist
call p_verify_reprepare_count(0);
SUCCESS
deallocate prepare stmt;
drop table t2;
=====================================================================
Part 5: TABLE -> TABLE (DDL) transitions
=====================================================================
......@@ -192,6 +219,7 @@ SUCCESS
select @message;
@message
new trigger: 11
Test 6-e: removing a relevant trigger
drop trigger t1_bi;
set @val=12;
execute stmt using @val;
......@@ -444,6 +472,7 @@ deallocate prepare stmt;
=====================================================================
Part 8: TABLE -> TEMPORARY TABLE transitions
=====================================================================
# Test 8-a: base table used recreated as temporary table
create table t1 (a int);
prepare stmt from "select * from t1";
execute stmt;
......@@ -462,6 +491,37 @@ SUCCESS
drop table t1;
deallocate prepare stmt;
# Test 8-b: temporary table has precedence over base table with same name
create table t1 (a int);
prepare stmt from 'select count(*) from t1';
execute stmt;
count(*)
0
call p_verify_reprepare_count(0);
SUCCESS
execute stmt;
count(*)
0
call p_verify_reprepare_count(0);
SUCCESS
create temporary table t1 AS SELECT 1;
execute stmt;
count(*)
1
call p_verify_reprepare_count(1);
SUCCESS
execute stmt;
count(*)
1
call p_verify_reprepare_count(0);
SUCCESS
deallocate prepare stmt;
drop temporary table t1;
drop table t1;
=====================================================================
Part 9: TABLE -> VIEW transitions
=====================================================================
......@@ -503,6 +563,7 @@ deallocate prepare stmt;
=====================================================================
Part 11: TEMPORARY TABLE -> TABLE transitions
=====================================================================
# Test 11-a: temporary table replaced by base table
create table t1 (a int);
insert into t1 (a) value (1);
create temporary table t1 (a int);
......@@ -524,6 +585,38 @@ a
1
drop table t1;
deallocate prepare stmt;
# Test 11-b: temporary table has precedence over base table with same name
# temporary table disappears
create table t1 (a int);
create temporary table t1 as select 1 as a;
prepare stmt from "select count(*) from t1";
execute stmt;
count(*)
1
call p_verify_reprepare_count(0);
SUCCESS
execute stmt;
count(*)
1
call p_verify_reprepare_count(0);
SUCCESS
drop temporary table t1;
execute stmt;
count(*)
0
call p_verify_reprepare_count(1);
SUCCESS
execute stmt;
count(*)
0
call p_verify_reprepare_count(0);
SUCCESS
deallocate prepare stmt;
drop table t1;
=====================================================================
Part 12: TEMPORARY TABLE -> TEMPORARY TABLE (DDL) transitions
=====================================================================
......@@ -740,6 +833,7 @@ drop procedure p1;
create procedure p1(out x int) select max(a) from t2 into x;
# XXX: bug. The prelocked list is not invalidated
# and we keep opening table t1, whereas the procedure
# is now referring to table t2
execute stmt;
ERROR HY000: View 'test.v1' references invalid table(s) or column(s) or function(s) or definer/invoker of view lack rights to use them
call p_verify_reprepare_count(0);
......@@ -1503,11 +1597,11 @@ deallocate prepare stmt_sp;
Ensure that metadata validation is performed for every type of
SQL statement where it is needed.
=====================================================================
drop table if exists t1;
create table t1 (a int);
#
# SQLCOM_SELECT
#
drop table if exists t1;
create table t1 (a int);
prepare stmt from "select 1 as res from dual where (1) in (select * from t1)";
drop table t1;
create table t1 (x int);
......@@ -1566,6 +1660,18 @@ call p_verify_reprepare_count(0);
SUCCESS
drop table t2;
create view t2 as select 1;
execute stmt;
Got one of the listed errors
call p_verify_reprepare_count(1);
SUCCESS
execute stmt;
Got one of the listed errors
call p_verify_reprepare_count(0);
SUCCESS
drop view t2;
drop table t1;
create table t1 (x varchar(20));
execute stmt;
......@@ -1580,6 +1686,18 @@ call p_verify_reprepare_count(0);
SUCCESS
drop table t2;
alter table t1 add column y decimal(10,3);
execute stmt;
call p_verify_reprepare_count(1);
SUCCESS
select * from t2;
x y
drop table t2;
execute stmt;
call p_verify_reprepare_count(0);
SUCCESS
drop table t1;
deallocate prepare stmt;
# XXX: no validation of the first table in case of
......@@ -1634,6 +1752,56 @@ Note 1050 Table 't2' already exists
call p_verify_reprepare_count(0);
SUCCESS
drop table t1;
drop temporary table t2;
drop table t2;
deallocate prepare stmt;
create table t1 (a int);
prepare stmt from "create table t2 like t1";
execute stmt;
call p_verify_reprepare_count(0);
SUCCESS
drop table t2;
execute stmt;
call p_verify_reprepare_count(0);
SUCCESS
drop table t2;
drop table t1;
execute stmt;
ERROR 42S02: Table 'test.t1' doesn't exist
call p_verify_reprepare_count(0);
SUCCESS
execute stmt;
ERROR 42S02: Table 'test.t1' doesn't exist
call p_verify_reprepare_count(0);
SUCCESS
create table t1 (x char(17));
execute stmt;
call p_verify_reprepare_count(1);
SUCCESS
drop table t2;
execute stmt;
call p_verify_reprepare_count(0);
SUCCESS
drop table t2;
alter table t1 add column y time;
execute stmt;
call p_verify_reprepare_count(1);
SUCCESS
select * from t2;
x y
drop table t2;
execute stmt;
call p_verify_reprepare_count(0);
SUCCESS
drop table t1;
drop table t2;
deallocate prepare stmt;
......
mysql-test/r/ps_ddl1.result 0 → 100644
View file @ 30296dca
drop temporary table if exists t1;
drop table if exists t1, t2;
drop procedure if exists p_verify_reprepare_count;
drop procedure if exists p1;
drop function if exists f1;
drop view if exists t1;
drop schema if exists mysqltest;
create procedure p_verify_reprepare_count(expected int)
begin
declare old_reprepare_count int default @reprepare_count;
select variable_value from
information_schema.session_status where
variable_name='com_stmt_reprepare'
into @reprepare_count;
if old_reprepare_count + expected <> @reprepare_count then
select concat("Expected: ", expected,
", actual: ", @reprepare_count - old_reprepare_count)
as "ERROR";
else
select '' as "SUCCESS";
end if;
end|
set @reprepare_count= 0;
flush status;
drop table if exists t1;
# Column added or dropped is not within the list of selected columns
# or table comment has changed.
# A reprepare is probably not needed.
create table t1 (a int, b int);
prepare stmt from "select a from t1";
execute stmt;
a
call p_verify_reprepare_count(0);
SUCCESS
alter table t1 add column c int;
execute stmt;
a
call p_verify_reprepare_count(1);
SUCCESS
execute stmt;
a
call p_verify_reprepare_count(0);
SUCCESS
alter table t1 drop column b;
execute stmt;
a
call p_verify_reprepare_count(1);
SUCCESS
execute stmt;
a
call p_verify_reprepare_count(0);
SUCCESS
alter table t1 comment "My best table";
execute stmt;
a
call p_verify_reprepare_count(1);
SUCCESS
execute stmt;
a
call p_verify_reprepare_count(0);
SUCCESS
drop table t1;
deallocate prepare stmt;
# Selects using the table at various positions, inser,update ...
# + the table disappears
create table t1 (a int);
prepare stmt1 from "truncate t1";
prepare stmt2 from "select 1 as my_column from t1";
prepare stmt3 from "select 1 as my_column from (select * from t1) as t2";
prepare stmt4 from
"select 1 as my_column from (select 1) as t2 where exists (select 1 from t1)";
prepare stmt5 from "select * from (select 1 as b) as t2, t1";
prepare stmt6 from "select * from t1 union all select 1.5";
prepare stmt7 from "select 1 as my_column union all select 1 from t1";
prepare stmt8 from "insert into t1 values(1),(2)";
prepare stmt9 from "update t1 set a = 3 where a = 2";
prepare stmt10 from "delete from t1 where a = 1";
# Attention: Result logging is disabled.
execute stmt10;
execute stmt9;
execute stmt8;
execute stmt7;
execute stmt6;
execute stmt5;
execute stmt4;
execute stmt3;
execute stmt2;
execute stmt1;
call p_verify_reprepare_count(0);
SUCCESS
drop table t1;
execute stmt10;
ERROR 42S02: Table 'test.t1' doesn't exist
execute stmt9;
ERROR 42S02: Table 'test.t1' doesn't exist
execute stmt8;
ERROR 42S02: Table 'test.t1' doesn't exist
execute stmt7;
ERROR 42S02: Table 'test.t1' doesn't exist
execute stmt6;
ERROR 42S02: Table 'test.t1' doesn't exist
execute stmt5;
ERROR 42S02: Table 'test.t1' doesn't exist
execute stmt4;
ERROR 42S02: Table 'test.t1' doesn't exist
execute stmt3;
ERROR 42S02: Table 'test.t1' doesn't exist
execute stmt2;
ERROR 42S02: Table 'test.t1' doesn't exist
execute stmt1;
ERROR 42S02: Table 'test.t1' doesn't exist
call p_verify_reprepare_count(0);
SUCCESS
deallocate prepare stmt10;
deallocate prepare stmt9;
deallocate prepare stmt8;
deallocate prepare stmt7;
deallocate prepare stmt6;
deallocate prepare stmt5;
deallocate prepare stmt4;
deallocate prepare stmt3;
deallocate prepare stmt2;
deallocate prepare stmt1;
# Selects using the table at various positions, inser,update ...
# + layout change (drop column) which must cause a reprepare
create table t1 (a int, b int);
insert into t1 values(1,1),(2,2),(3,3);
create table t2 like t1;
insert into t1 values(2,2);
prepare stmt1 from "select a,b from t1";
prepare stmt2 from "select a,b from (select * from t1) as t1";
prepare stmt3 from "select * from t1 where a = 2 and b = 2";
prepare stmt4 from "select * from t2 where (a,b) in (select * from t1)";
prepare stmt5 from "select * from t1 union select * from t2";
prepare stmt6 from "select * from t1 union all select * from t2";
prepare stmt7 from "insert into t1 set a = 4, b = 4";
prepare stmt8 from "insert into t1 select * from t2";
# Attention: Result logging is disabled.
execute stmt8;
execute stmt7;
execute stmt6;
execute stmt5;
execute stmt4;
execute stmt3;
execute stmt2;
execute stmt1;
call p_verify_reprepare_count(0);
SUCCESS
alter table t1 drop column b;
execute stmt8;
ERROR 21S01: Column count doesn't match value count at row 1
call p_verify_reprepare_count(1);
SUCCESS
execute stmt7;
ERROR 42S22: Unknown column 'b' in 'field list'
call p_verify_reprepare_count(1);
SUCCESS
execute stmt6;
ERROR 21000: The used SELECT statements have a different number of columns
call p_verify_reprepare_count(1);
SUCCESS
execute stmt5;
ERROR 21000: The used SELECT statements have a different number of columns
call p_verify_reprepare_count(1);
SUCCESS
execute stmt4;
ERROR 21000: Operand should contain 2 column(s)
call p_verify_reprepare_count(1);
SUCCESS
execute stmt3;
ERROR 42S22: Unknown column 'b' in 'where clause'
call p_verify_reprepare_count(1);
SUCCESS
execute stmt2;
ERROR 42S22: Unknown column 'b' in 'field list'
call p_verify_reprepare_count(1);
SUCCESS
execute stmt1;
ERROR 42S22: Unknown column 'b' in 'field list'
call p_verify_reprepare_count(1);
SUCCESS
execute stmt8;
ERROR 21S01: Column count doesn't match value count at row 1
call p_verify_reprepare_count(1);
ERROR
Expected: 1, actual: 0
execute stmt7;
ERROR 42S22: Unknown column 'b' in 'field list'
call p_verify_reprepare_count(1);
SUCCESS
execute stmt6;
ERROR 21000: The used SELECT statements have a different number of columns
call p_verify_reprepare_count(1);
SUCCESS
execute stmt5;
ERROR 21000: The used SELECT statements have a different number of columns
call p_verify_reprepare_count(1);
SUCCESS
execute stmt4;
ERROR 21000: Operand should contain 2 column(s)
call p_verify_reprepare_count(1);
SUCCESS
execute stmt3;
ERROR 42S22: Unknown column 'b' in 'where clause'
call p_verify_reprepare_count(1);
SUCCESS
execute stmt2;
ERROR 42S22: Unknown column 'b' in 'field list'
call p_verify_reprepare_count(1);
SUCCESS
execute stmt1;
ERROR 42S22: Unknown column 'b' in 'field list'
call p_verify_reprepare_count(1);
SUCCESS
# Why does the INSERT ... SELECT does not get a reprepare or is
# only the counter not incremented?
execute stmt8;
ERROR 21S01: Column count doesn't match value count at row 1
call p_verify_reprepare_count(1);
ERROR
Expected: 1, actual: 0
alter table t2 add column c int;
execute stmt8;
ERROR 21S01: Column count doesn't match value count at row 1
call p_verify_reprepare_count(1);
SUCCESS
deallocate prepare stmt8;
deallocate prepare stmt7;
deallocate prepare stmt6;
deallocate prepare stmt5;
deallocate prepare stmt4;
deallocate prepare stmt3;
deallocate prepare stmt2;
deallocate prepare stmt1;
drop table t1;
drop table t2;
# select AVG(<col>) + optimizer uses index meets loss of the index
create table t1 (a int, b int, primary key(b),unique index t1_unq_idx(a));
insert into t1 set a = 0, b = 0;
insert into t1 select a + 1, b + 1 from t1;
insert into t1 select a + 2, b + 2 from t1;
insert into t1 select a + 4, b + 4 from t1;
insert into t1 select a + 8, b + 8 from t1;
# Optimizer strategy: Possible keys = NULL , Extra = Using index
prepare stmt from "select avg(a) from t1";
execute stmt;
avg(a)
7.5000
call p_verify_reprepare_count(0);
SUCCESS
execute stmt;
avg(a)
7.5000
call p_verify_reprepare_count(0);
SUCCESS
alter table t1 drop index t1_unq_idx;
# Optimizer strategy: Possible keys = NULL , Extra =
execute stmt;
avg(a)
7.5000
call p_verify_reprepare_count(1);
SUCCESS
execute stmt;
avg(a)
7.5000
call p_verify_reprepare_count(0);
SUCCESS
# select AVG(<col>) + optimizer uses table scan meets a new index
alter table t1 add unique index t1_unq_idx(a);
# Optimizer strategy: Possible keys = NULL , Extra = Using index
execute stmt;
avg(a)
7.5000
call p_verify_reprepare_count(1);
SUCCESS
execute stmt;
avg(a)
7.5000
call p_verify_reprepare_count(0);
SUCCESS
deallocate prepare stmt;
drop table t1;
# table replaced by not updatable view - Insert
create table t1 (a int);
prepare stmt from "insert into t1 values(1)";
execute stmt;
call p_verify_reprepare_count(0);
SUCCESS
drop table t1;
create view t1 as select 1;
execute stmt;
ERROR HY000: The target table t1 of the INSERT is not insertable-into
call p_verify_reprepare_count(1);
SUCCESS
drop view t1;
create table t2 (a int);
create view t1 as select * from t2 with check option;
execute stmt;
call p_verify_reprepare_count(1);
SUCCESS
execute stmt;
call p_verify_reprepare_count(0);
SUCCESS
select * from t1;
a
1
1
deallocate prepare stmt;
drop view t1;
drop table t2;
=====================================================================
Some freestyle tests
=====================================================================
create temporary table t1 as select 1 as a;
create procedure p1()
begin
drop temporary table t1;
end|
create function f1() returns int
begin
call p1();
return 1;
end|
prepare stmt from "select f1() as my_column, a from t1";
execute stmt;
ERROR HY000: Can't reopen table: 't1'
call p_verify_reprepare_count(0);
SUCCESS
select * from t1;
a
1
prepare stmt from "select a, f1() as my_column from t1";
execute stmt;
ERROR HY000: Can't reopen table: 't1'
call p_verify_reprepare_count(0);
SUCCESS
select * from t1;
a
1
prepare stmt from "select f1() as my_column, count(*) from t1";
execute stmt;
ERROR HY000: Can't reopen table: 't1'
call p_verify_reprepare_count(0);
SUCCESS
select * from t1;
a
1
prepare stmt from "select count(*), f1() as my_column from t1";
execute stmt;
ERROR HY000: Can't reopen table: 't1'
call p_verify_reprepare_count(0);
SUCCESS
select * from t1;
a
1
# Execute fails, no drop of temporary table
prepare stmt from "select 1 as my_column from (select 1) as t2
where exists (select f1() from t1)";
execute stmt;
my_column
1
call p_verify_reprepare_count(0);
SUCCESS
execute stmt;
my_column
1
call p_verify_reprepare_count(0);
SUCCESS
select * from t1;
a
1
# Execute drops temporary table
prepare stmt from "select f1()";
execute stmt;
f1()
1
call p_verify_reprepare_count(0);
SUCCESS
execute stmt;
ERROR 42S02: Unknown table 't1'
call p_verify_reprepare_count(0);
SUCCESS
drop function f1;
drop procedure p1;
deallocate prepare stmt;
# Execute fails, temporary table is not replaced by another
create temporary table t1 as select 1 as a;
create procedure p1()
begin
drop temporary table t1;
create temporary table t1 as select 'abc' as a;
end|
create function f1() returns int
begin
call p1();
return 1;
end|
prepare stmt from "select count(*), f1() as my_column from t1";
execute stmt;
ERROR HY000: Can't reopen table: 't1'
call p_verify_reprepare_count(0);
SUCCESS
select * from t1;
a
1
deallocate prepare stmt;
prepare stmt from "call p1";
execute stmt;
drop procedure p1;
create schema mysqltest;
create procedure mysqltest.p1()
begin
drop schema mysqltest;
create schema mysqltest;
end|
execute stmt;
ERROR 42000: PROCEDURE test.p1 does not exist
call p_verify_reprepare_count(0);
SUCCESS
execute stmt;
ERROR 42000: PROCEDURE test.p1 does not exist
call p_verify_reprepare_count(0);
SUCCESS
deallocate prepare stmt;
drop schema mysqltest;
drop temporary table t1;
# Cleanup
#
drop temporary table if exists t1;
drop table if exists t1, t2;
drop procedure if exists p_verify_reprepare_count;
drop procedure if exists p1;
drop function if exists f1;
drop view if exists t1;
drop schema if exists mysqltest;
mysql-test/t/ps_ddl.test
View file @ 30296dca
......@@ -104,6 +104,7 @@ prepare stmt from "select * from t1";
--echo Part 4: TABLE -> NOTHING transitions
--echo =====================================================================
--echo # Test 4-a: select ... from <table>
create table t1 (a int);
prepare stmt from "select * from t1";
......@@ -121,6 +122,25 @@ execute stmt;
call p_verify_reprepare_count(0);
deallocate prepare stmt;
--echo # Test 4-b: TABLE -> NOTHING by renaming the table
create table t1 (a int);
prepare stmt from "select * from t1";
execute stmt;
call p_verify_reprepare_count(0);
execute stmt;
call p_verify_reprepare_count(0);
rename table t1 to t2;
--error ER_NO_SUCH_TABLE
execute stmt;
call p_verify_reprepare_count(0);
--error ER_NO_SUCH_TABLE
execute stmt;
call p_verify_reprepare_count(0);
deallocate prepare stmt;
drop table t2;
--echo =====================================================================
--echo Part 5: TABLE -> TABLE (DDL) transitions
--echo =====================================================================
......@@ -143,11 +163,11 @@ call p_verify_reprepare_count(0);
drop table t1;
deallocate prepare stmt;
--echo =====================================================================
--echo Part 6: TABLE -> TABLE (TRIGGER) transitions
--echo =====================================================================
--echo # Test 6-a: adding a relevant trigger
create table t1 (a int);
......@@ -229,7 +249,7 @@ execute stmt using @val;
call p_verify_reprepare_count(1);
select @message;
--ehco Test 6-e: removing a relevant trigger
--echo Test 6-e: removing a relevant trigger
drop trigger t1_bi;
......@@ -414,6 +434,7 @@ deallocate prepare stmt;
--echo Part 8: TABLE -> TEMPORARY TABLE transitions
--echo =====================================================================
--echo # Test 8-a: base table used recreated as temporary table
create table t1 (a int);
prepare stmt from "select * from t1";
......@@ -430,6 +451,25 @@ call p_verify_reprepare_count(0);
drop table t1;
deallocate prepare stmt;
--echo # Test 8-b: temporary table has precedence over base table with same name
create table t1 (a int);
prepare stmt from 'select count(*) from t1';
execute stmt;
call p_verify_reprepare_count(0);
execute stmt;
call p_verify_reprepare_count(0);
create temporary table t1 AS SELECT 1;
execute stmt;
call p_verify_reprepare_count(1);
execute stmt;
call p_verify_reprepare_count(0);
deallocate prepare stmt;
drop temporary table t1;
drop table t1;
--echo =====================================================================
--echo Part 9: TABLE -> VIEW transitions
--echo =====================================================================
......@@ -471,6 +511,7 @@ deallocate prepare stmt;
--echo Part 11: TEMPORARY TABLE -> TABLE transitions
--echo =====================================================================
--echo # Test 11-a: temporary table replaced by base table
create table t1 (a int);
insert into t1 (a) value (1);
create temporary table t1 (a int);
......@@ -488,6 +529,27 @@ select * from t1;
drop table t1;
deallocate prepare stmt;
--echo # Test 11-b: temporary table has precedence over base table with same name
--echo # temporary table disappears
create table t1 (a int);
create temporary table t1 as select 1 as a;
prepare stmt from "select count(*) from t1";
execute stmt;
call p_verify_reprepare_count(0);
execute stmt;
call p_verify_reprepare_count(0);
drop temporary table t1;
execute stmt;
call p_verify_reprepare_count(1);
execute stmt;
call p_verify_reprepare_count(0);
deallocate prepare stmt;
drop table t1;
--echo =====================================================================
--echo Part 12: TEMPORARY TABLE -> TEMPORARY TABLE (DDL) transitions
--echo =====================================================================
......@@ -674,7 +736,7 @@ drop procedure p1;
create procedure p1(out x int) select max(a) from t2 into x;
--echo # XXX: bug. The prelocked list is not invalidated
--echo # and we keep opening table t1, whereas the procedure
--ehco # is now referring to table t2
--echo # is now referring to table t2
--error ER_VIEW_INVALID
execute stmt;
call p_verify_reprepare_count(0);
......@@ -1354,13 +1416,15 @@ deallocate prepare stmt_sp;
--echo Ensure that metadata validation is performed for every type of
--echo SQL statement where it is needed.
--echo =====================================================================
--echo #
--echo # SQLCOM_SELECT
--echo #
--disable_warnings
drop table if exists t1;
--enable_warnings
create table t1 (a int);
--echo #
--echo # SQLCOM_SELECT
--echo #
prepare stmt from "select 1 as res from dual where (1) in (select * from t1)";
drop table t1;
create table t1 (x int);
......@@ -1368,16 +1432,16 @@ execute stmt;
drop table t1;
deallocate prepare stmt;
call p_verify_reprepare_count(1);
--echo #
--echo # SQLCOM_CREATE_TABLE
--echo #
--disable_warnings
drop table if exists t1;
drop table if exists t2;
--enable_warnings
create table t1 (a int);
prepare stmt from 'create table t2 as select * from t1';
execute stmt;
drop table t2;
......@@ -1385,6 +1449,7 @@ execute stmt;
drop table t2;
execute stmt;
call p_verify_reprepare_count(0);
# Base table with name of table to be created exists
--error ER_TABLE_EXISTS_ERROR
execute stmt;
call p_verify_reprepare_count(1);
......@@ -1392,6 +1457,7 @@ call p_verify_reprepare_count(1);
execute stmt;
call p_verify_reprepare_count(0);
drop table t2;
# Temporary table with name of table to be created exists
create temporary table t2 (a int);
--error ER_TABLE_EXISTS_ERROR
execute stmt;
......@@ -1406,7 +1472,23 @@ drop table t2;
execute stmt;
call p_verify_reprepare_count(0);
drop table t2;
# View with name of table to be created exists
# Attention:
# We cannot print the error message because it contains a random filename.
# Example: 1050: Table '<some_path>/var/tmp/#sql_6979_0' already exists
# Therefore we mangle it via
# "--error ER_TABLE_EXISTS_ERROR,9999" (9999 is currently not used)
# to "Got one of the listed errors".
create view t2 as select 1;
--error ER_TABLE_EXISTS_ERROR,9999
execute stmt;
call p_verify_reprepare_count(1);
--error ER_TABLE_EXISTS_ERROR,9999
execute stmt;
call p_verify_reprepare_count(0);
drop view t2;
drop table t1;
# Table to be used recreated (drop,create) with different layout
create table t1 (x varchar(20));
execute stmt;
call p_verify_reprepare_count(1);
......@@ -1415,6 +1497,14 @@ drop table t2;
execute stmt;
call p_verify_reprepare_count(0);
drop table t2;
# Table to be used has a modified (alter table) layout
alter table t1 add column y decimal(10,3);
execute stmt;
call p_verify_reprepare_count(1);
select * from t2;
drop table t2;
execute stmt;
call p_verify_reprepare_count(0);
drop table t1;
deallocate prepare stmt;
--echo # XXX: no validation of the first table in case of
......@@ -1445,9 +1535,47 @@ call p_verify_reprepare_count(1);
execute stmt;
call p_verify_reprepare_count(0);
drop table t1;
drop temporary table t2;
drop table t2;
deallocate prepare stmt;
create table t1 (a int);
prepare stmt from "create table t2 like t1";
execute stmt;
call p_verify_reprepare_count(0);
drop table t2;
execute stmt;
call p_verify_reprepare_count(0);
drop table t2;
# Table to be used does not exist
drop table t1;
--error ER_NO_SUCH_TABLE
execute stmt;
call p_verify_reprepare_count(0);
--error ER_NO_SUCH_TABLE
execute stmt;
call p_verify_reprepare_count(0);
# Table to be used recreated (drop,create) with different layout
create table t1 (x char(17));
execute stmt;
call p_verify_reprepare_count(1);
drop table t2;
execute stmt;
call p_verify_reprepare_count(0);
drop table t2;
# Table to be used has a modified (alter table) layout
alter table t1 add column y time;
execute stmt;
call p_verify_reprepare_count(1);
select * from t2;
drop table t2;
execute stmt;
call p_verify_reprepare_count(0);
drop table t1;
drop table t2;
deallocate prepare stmt;
--echo #
--echo # SQLCOM_UPDATE
--echo #
......
mysql-test/t/ps_ddl1.test 0 → 100644
View file @ 30296dca
#
# Testing the behavior of 'PREPARE', 'DDL', 'EXECUTE' scenarios
#
# There are several subtests which are probably "superfluous" because a DDL
# statement before the EXECUTE <prepared stmt handle> contained a keyword
# or action (Example: Alter) which causes that all prepared statements using
# the modified object are reprepared before execution.
# Please do not delete these subtests if they disturb. Just disable them by
# if (0)
# {
# <tests to disable>
# }.
# There might be future optimisations of the server which decrease the amount
# of unneeded reprepares or skip unneeded prepare steps and than these subtests
# might become valuable.
# Example:
# Every preceding ALTER TABLE seems to cause a reprepare.
# But if the ALTER only changed the table comment ...
#
# Created: 2008-04-18 mleich
#
--disable_warnings
drop temporary table if exists t1;
drop table if exists t1, t2;
drop procedure if exists p_verify_reprepare_count;
drop procedure if exists p1;
drop function if exists f1;
drop view if exists t1;
drop schema if exists mysqltest;
--enable_warnings
delimiter |;
create procedure p_verify_reprepare_count(expected int)
begin
declare old_reprepare_count int default @reprepare_count;
select variable_value from
information_schema.session_status where
variable_name='com_stmt_reprepare'
into @reprepare_count;
if old_reprepare_count + expected <> @reprepare_count then
select concat("Expected: ", expected,
", actual: ", @reprepare_count - old_reprepare_count)
as "ERROR";
else
select '' as "SUCCESS";
end if;
end|
delimiter ;|
set @reprepare_count= 0;
flush status;
--disable_warnings
drop table if exists t1;
--disable_warnings
--echo # Column added or dropped is not within the list of selected columns
--echo # or table comment has changed.
--echo # A reprepare is probably not needed.
create table t1 (a int, b int);
prepare stmt from "select a from t1";
execute stmt;
call p_verify_reprepare_count(0);
alter table t1 add column c int;
execute stmt;
call p_verify_reprepare_count(1);
execute stmt;
call p_verify_reprepare_count(0);
alter table t1 drop column b;
execute stmt;
call p_verify_reprepare_count(1);
execute stmt;
call p_verify_reprepare_count(0);
alter table t1 comment "My best table";
execute stmt;
call p_verify_reprepare_count(1);
execute stmt;
call p_verify_reprepare_count(0);
drop table t1;
deallocate prepare stmt;
--echo # Selects using the table at various positions, inser,update ...
--echo # + the table disappears
create table t1 (a int);
# Attention:
# "truncate" must have the first position (= executed as last prepared
# statement), because it recreates the table which has leads to reprepare
# (is this really needed) of all statements.
prepare stmt1 from "truncate t1";
prepare stmt2 from "select 1 as my_column from t1";
prepare stmt3 from "select 1 as my_column from (select * from t1) as t2";
prepare stmt4 from
"select 1 as my_column from (select 1) as t2 where exists (select 1 from t1)";
prepare stmt5 from "select * from (select 1 as b) as t2, t1";
prepare stmt6 from "select * from t1 union all select 1.5";
prepare stmt7 from "select 1 as my_column union all select 1 from t1";
prepare stmt8 from "insert into t1 values(1),(2)";
prepare stmt9 from "update t1 set a = 3 where a = 2";
prepare stmt10 from "delete from t1 where a = 1";
let ps_stmt_count= 10;
--echo # Attention: Result logging is disabled.
# Checks of correct results of statements are not the goal of this test.
let $num= $ps_stmt_count;
while ($num)
{
--disable_result_log
eval execute stmt$num;
--enable_result_log
dec $num;
}
# There was no reprepare needed, because none of the objects has changed.
call p_verify_reprepare_count(0);
drop table t1;
let $num= $ps_stmt_count;
while ($num)
{
--error ER_NO_SUCH_TABLE
eval execute stmt$num;
dec $num;
}
# There was no reprepare needed, because the statement is no more applicable.
call p_verify_reprepare_count(0);
let $num= $ps_stmt_count;
while ($num)
{
eval deallocate prepare stmt$num;
dec $num;
}
--echo # Selects using the table at various positions, inser,update ...
--echo # + layout change (drop column) which must cause a reprepare
create table t1 (a int, b int);
insert into t1 values(1,1),(2,2),(3,3);
create table t2 like t1;
insert into t1 values(2,2);
prepare stmt1 from "select a,b from t1";
prepare stmt2 from "select a,b from (select * from t1) as t1";
prepare stmt3 from "select * from t1 where a = 2 and b = 2";
prepare stmt4 from "select * from t2 where (a,b) in (select * from t1)";
prepare stmt5 from "select * from t1 union select * from t2";
prepare stmt6 from "select * from t1 union all select * from t2";
prepare stmt7 from "insert into t1 set a = 4, b = 4";
prepare stmt8 from "insert into t1 select * from t2";
let ps_stmt_count= 8;
--echo # Attention: Result logging is disabled.
# Checks of correct results of statements are not the goal of this test.
let $num= $ps_stmt_count;
while ($num)
{
--disable_result_log
eval execute stmt$num;
--enable_result_log
dec $num;
}
call p_verify_reprepare_count(0);
alter table t1 drop column b;
--disable_abort_on_error
let $num= $ps_stmt_count;
while ($num)
{
eval execute stmt$num;
# A reprepare is needed, because layout change of t1 affects statement.
call p_verify_reprepare_count(1);
dec $num;
}
let $num= $ps_stmt_count;
while ($num)
{
eval execute stmt$num;
call p_verify_reprepare_count(1);
dec $num;
}
--echo # Why does the INSERT ... SELECT does not get a reprepare or is
--echo # only the counter not incremented?
eval execute stmt8;
call p_verify_reprepare_count(1);
--enable_abort_on_error
alter table t2 add column c int;
--error ER_WRONG_VALUE_COUNT_ON_ROW
eval execute stmt8;
call p_verify_reprepare_count(1);
let $num= $ps_stmt_count;
while ($num)
{
eval deallocate prepare stmt$num;
dec $num;
}
drop table t1;
drop table t2;
--echo # select AVG(<col>) + optimizer uses index meets loss of the index
create table t1 (a int, b int, primary key(b),unique index t1_unq_idx(a));
# We need an index which is not converted to PRIMARY KEY (becomes in
# case of InnoDB the key used for table clustering).
insert into t1 set a = 0, b = 0;
insert into t1 select a + 1, b + 1 from t1;
insert into t1 select a + 2, b + 2 from t1;
insert into t1 select a + 4, b + 4 from t1;
insert into t1 select a + 8, b + 8 from t1;
# "using index" optimizer strategy is intended
let $possible_keys=
query_get_value(explain select avg(a) from t1, possible_keys, 1);
let $extra=
query_get_value(explain select avg(a) from t1, Extra, 1);
--echo # Optimizer strategy: Possible keys = $possible_keys , Extra = $extra
prepare stmt from "select avg(a) from t1";
execute stmt;
call p_verify_reprepare_count(0);
execute stmt;
call p_verify_reprepare_count(0);
alter table t1 drop index t1_unq_idx;
let $possible_keys=
query_get_value(explain select avg(a) from t1, possible_keys, 1);
let $extra=
query_get_value(explain select avg(a) from t1, Extra, 1);
--echo # Optimizer strategy: Possible keys = $possible_keys , Extra = $extra
execute stmt;
call p_verify_reprepare_count(1);
execute stmt;
call p_verify_reprepare_count(0);
--echo # select AVG(<col>) + optimizer uses table scan meets a new index
alter table t1 add unique index t1_unq_idx(a);
let $possible_keys=
query_get_value(explain select avg(a) from t1, possible_keys, 1);
let $extra=
query_get_value(explain select avg(a) from t1, Extra, 1);
--echo # Optimizer strategy: Possible keys = $possible_keys , Extra = $extra
execute stmt;
call p_verify_reprepare_count(1);
execute stmt;
call p_verify_reprepare_count(0);
deallocate prepare stmt;
drop table t1;
--echo # table replaced by not updatable view - Insert
create table t1 (a int);
prepare stmt from "insert into t1 values(1)";
execute stmt;
call p_verify_reprepare_count(0);
drop table t1;
create view t1 as select 1;
--error ER_NON_INSERTABLE_TABLE
execute stmt;
call p_verify_reprepare_count(1);
drop view t1;
create table t2 (a int);
create view t1 as select * from t2 with check option;
execute stmt;
call p_verify_reprepare_count(1);
execute stmt;
call p_verify_reprepare_count(0);
select * from t1;
deallocate prepare stmt;
drop view t1;
drop table t2;
--echo =====================================================================
--echo Some freestyle tests
--echo =====================================================================
create temporary table t1 as select 1 as a;
delimiter |;
create procedure p1()
begin
drop temporary table t1;
end|
create function f1() returns int
begin
call p1();
return 1;
end|
delimiter ;|
prepare stmt from "select f1() as my_column, a from t1";
--error ER_CANT_REOPEN_TABLE
execute stmt;
call p_verify_reprepare_count(0);
select * from t1;
prepare stmt from "select a, f1() as my_column from t1";
--error ER_CANT_REOPEN_TABLE
execute stmt;
call p_verify_reprepare_count(0);
select * from t1;
prepare stmt from "select f1() as my_column, count(*) from t1";
--error ER_CANT_REOPEN_TABLE
execute stmt;
call p_verify_reprepare_count(0);
select * from t1;
prepare stmt from "select count(*), f1() as my_column from t1";
--error ER_CANT_REOPEN_TABLE
execute stmt;
call p_verify_reprepare_count(0);
select * from t1;
--echo # Execute fails, no drop of temporary table
prepare stmt from "select 1 as my_column from (select 1) as t2
where exists (select f1() from t1)";
execute stmt;
call p_verify_reprepare_count(0);
execute stmt;
call p_verify_reprepare_count(0);
select * from t1;
--echo # Execute drops temporary table
prepare stmt from "select f1()";
execute stmt;
call p_verify_reprepare_count(0);
--error ER_BAD_TABLE_ERROR
execute stmt;
call p_verify_reprepare_count(0);
drop function f1;
drop procedure p1;
deallocate prepare stmt;
--echo # Execute fails, temporary table is not replaced by another
create temporary table t1 as select 1 as a;
delimiter |;
create procedure p1()
begin
drop temporary table t1;
create temporary table t1 as select 'abc' as a;
end|
create function f1() returns int
begin
call p1();
return 1;
end|
delimiter ;|
prepare stmt from "select count(*), f1() as my_column from t1";
--error ER_CANT_REOPEN_TABLE
execute stmt;
call p_verify_reprepare_count(0);
select * from t1;
deallocate prepare stmt;
prepare stmt from "call p1";
execute stmt;
drop procedure p1;
create schema mysqltest;
delimiter |;
create procedure mysqltest.p1()
begin
drop schema mysqltest;
create schema mysqltest;
end|
delimiter ;|
--error ER_SP_DOES_NOT_EXIST
execute stmt;
call p_verify_reprepare_count(0);
--error ER_SP_DOES_NOT_EXIST
execute stmt;
call p_verify_reprepare_count(0);
deallocate prepare stmt;
drop schema mysqltest;
drop temporary table t1;
# Bug#36089 drop temp table in SP called by function, crash
# Note: A non prepared "select 1 from t1 having count(*) = f1();" is sufficient.
if (0)
{
create temporary table t1 as select 1 as a;
prepare stmt from "select 1 from t1 having count(*) = f1()";
execute stmt;
call p_verify_reprepare_count(0);
deallocate prepare stmt;
drop temporary table t1;
}
--echo # Cleanup
--echo #
--disable_warnings
drop temporary table if exists t1;
drop table if exists t1, t2;
drop procedure if exists p_verify_reprepare_count;
drop procedure if exists p1;
drop function if exists f1;
drop view if exists t1;
drop schema if exists mysqltest;
--enable_warnings
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7