merge from mysql-5.1-innodb_plugin branch.

change tree name to 'mysql-5.1-innodb_plugin'

.bzr-mysql/default.conf

 [MYSQL]
 post_commit_to = "satya.bn@sun.com,svoj@sun.com,joro@sun.com"
 post_push_to = "satya.bn@sun.com,svoj@sun.com,joro@sun.com"
-tree_name = "mysql-5.1-bugteam-innodb_plugin"
+tree_name = "mysql-5.1-innodb_plugin"

CMakeLists.txt

@@ -47,6 +47,10 @@ SET(WITH_MYISAMMRG_STORAGE_ENGINE TRUE)
 ADD_DEFINITIONS(-DWITH_MYISAMMRG_STORAGE_ENGINE)
 SET (mysql_plugin_defs "${mysql_plugin_defs},builtin_myisammrg_plugin")
 
+IF(WITH_COMMUNITY_FEATURES)
+  ADD_DEFINITIONS(-DENABLED_PROFILING -DCOMMUNITY_SERVER)
+ENDIF(WITH_COMMUNITY_FEATURES)
+
 IF(WITH_ARCHIVE_STORAGE_ENGINE)
   ADD_DEFINITIONS(-DWITH_ARCHIVE_STORAGE_ENGINE)
   SET (mysql_plugin_defs "${mysql_plugin_defs},builtin_archive_plugin")

client/mysqltest.cc

@@ -280,6 +280,7 @@ enum enum_commands {
   Q_SEND_QUIT, Q_CHANGE_USER, Q_MKDIR, Q_RMDIR,
   Q_LIST_FILES, Q_LIST_FILES_WRITE_FILE, Q_LIST_FILES_APPEND_FILE,
   Q_SEND_SHUTDOWN, Q_SHUTDOWN_SERVER,
+  Q_MOVE_FILE,
 
   Q_UNKNOWN,			       /* Unknown command.   */
   Q_COMMENT,			       /* Comments, ignored. */
@@ -376,6 +377,7 @@ const char *command_names[]=
   "list_files_append_file",
   "send_shutdown",
   "shutdown_server",
+  "move_file",
 
   0
 };
@@ -966,6 +968,7 @@ void check_command_args(struct st_command *command,
   for (i= 0; i < num_args; i++)
   {
     const struct command_arg *arg= &args[i];
+    char delimiter;
 
     switch (arg->type) {
       /* A string */
@@ -974,8 +977,15 @@ void check_command_args(struct st_command *command,
       while (*ptr && *ptr == ' ')
         ptr++;
       start= ptr;
-      /* Find end of arg, terminated by "delimiter_arg" */
-      while (*ptr && *ptr != delimiter_arg)
+      delimiter = delimiter_arg;
+      /* If start of arg is ' ` or " search to matching quote end instead */
+      if (*ptr && strchr ("'`\"", *ptr))
+      {
+	delimiter= *ptr;
+	start= ++ptr;
+      }
+      /* Find end of arg, terminated by "delimiter" */
+      while (*ptr && *ptr != delimiter)
         ptr++;
       if (ptr > start)
       {
@@ -987,6 +997,11 @@ void check_command_args(struct st_command *command,
         /* Empty string */
         init_dynamic_string(arg->ds, "", 0, 0);
       }
+      /* Find real end of arg, terminated by "delimiter_arg" */
+      /* This will do nothing if arg was not closed by quotes */
+      while (*ptr && *ptr != delimiter_arg)
+        ptr++;      
+
       command->last_argument= (char*)ptr;
 
       /* Step past the delimiter */
@@ -1794,7 +1809,7 @@ void check_result()
           log_file.file_name(), reject_file, errno);
 
     show_diff(NULL, result_file_name, reject_file);
-    die(mess);
+    die("%s", mess);
     break;
   }
   default: /* impossible */
@@ -2889,6 +2904,42 @@ void do_copy_file(struct st_command *command)
 }
 
 
+/*
+  SYNOPSIS
+  do_move_file
+  command	command handle
+
+  DESCRIPTION
+  move_file <from_file> <to_file>
+  Move <from_file> to <to_file>
+*/
+
+void do_move_file(struct st_command *command)
+{
+  int error;
+  static DYNAMIC_STRING ds_from_file;
+  static DYNAMIC_STRING ds_to_file;
+  const struct command_arg move_file_args[] = {
+    { "from_file", ARG_STRING, TRUE, &ds_from_file, "Filename to move from" },
+    { "to_file", ARG_STRING, TRUE, &ds_to_file, "Filename to move to" }
+  };
+  DBUG_ENTER("do_move_file");
+
+  check_command_args(command, command->first_argument,
+                     move_file_args,
+                     sizeof(move_file_args)/sizeof(struct command_arg),
+                     ' ');
+
+  DBUG_PRINT("info", ("Move %s to %s", ds_from_file.str, ds_to_file.str));
+  error= (my_rename(ds_from_file.str, ds_to_file.str,
+                    MYF(0)) != 0);
+  handle_command_error(command, error);
+  dynstr_free(&ds_from_file);
+  dynstr_free(&ds_to_file);
+  DBUG_VOID_RETURN;
+}
+
+
 /*
   SYNOPSIS
   do_chmod_file
@@ -4546,7 +4597,7 @@ void select_connection(struct st_command *command)
   };
   check_command_args(command, command->first_argument, connection_args,
                      sizeof(connection_args)/sizeof(struct command_arg),
-                     ',');
+                     ' ');
 
   DBUG_PRINT("info", ("changing connection: %s", ds_connection.str));
   select_connection_name(ds_connection.str);
@@ -7680,6 +7731,7 @@ int main(int argc, char **argv)
       case Q_CHANGE_USER: do_change_user(command); break;
       case Q_CAT_FILE: do_cat_file(command); break;
       case Q_COPY_FILE: do_copy_file(command); break;
+      case Q_MOVE_FILE: do_move_file(command); break;
       case Q_CHMOD_FILE: do_chmod_file(command); break;
       case Q_PERL: do_perl(command); break;
       case Q_DELIMITER:

include/myisam.h

@@ -404,7 +404,8 @@ typedef struct st_mi_check_param
   my_off_t keydata,totaldata,key_blocks,start_check_pos;
   ha_rows total_records,total_deleted;
   ha_checksum record_checksum,glob_crc;
-  ulong	use_buffers,read_buffer_length,write_buffer_length,
+  ulonglong use_buffers;
+  ulong read_buffer_length,write_buffer_length,
 	sort_buffer_length,sort_key_blocks;
   uint out_flag,warning_printed,error_printed,verbose;
   uint opt_sort_key,total_files,max_level;

mysql-test/collections/default.push

-perl mysql-test-run.pl --timer --force --comment=n_mix --mysqld=--binlog-format=mixed --experimental=collections/default.experimental
-perl mysql-test-run.pl --timer --force --comment=ps_row --ps-protocol --mysqld=--binlog-format=row --experimental=collections/default.experimental
-perl mysql-test-run.pl --timer --force --comment=embedded --embedded --experimental=collections/default.experimental
-perl mysql-test-run.pl --timer --force --comment=rpl_binlog_row --suite=rpl,binlog --mysqld=--binlog-format=row --experimental=collections/default.experimental
-perl mysql-test-run.pl --timer --force --comment=funcs_1 --suite=funcs_1 --experimental=collections/default.experimental
+perl mysql-test-run.pl --timer --force --parallel=auto --comment=n_mix --mysqld=--binlog-format=mixed --experimental=collections/default.experimental
+perl mysql-test-run.pl --timer --force --parallel=auto --comment=ps_row --ps-protocol --mysqld=--binlog-format=row --experimental=collections/default.experimental
+perl mysql-test-run.pl --timer --force --parallel=auto --comment=embedded --embedded --experimental=collections/default.experimental
+perl mysql-test-run.pl --timer --force --parallel=auto --comment=rpl_binlog_row --suite=rpl,binlog --mysqld=--binlog-format=row --experimental=collections/default.experimental
+perl mysql-test-run.pl --timer --force --parallel=auto --comment=funcs_1 --suite=funcs_1 --experimental=collections/default.experimental

mysql-test/lib/mtr_report.pm

@@ -71,6 +71,8 @@ sub _mtr_report_test_name ($) {
 
   print _name(), _timestamp();
   printf "%-40s ", $tname;
+  my $worker = $tinfo->{worker};
+  printf "w$worker " if $worker;
 
   return $tname;
 }
@@ -219,8 +221,8 @@ sub mtr_report_test ($) {
 }
 
 
-sub mtr_report_stats ($) {
-  my $tests= shift;
+sub mtr_report_stats ($;$) {
+  my ($tests, $dont_error)= @_;
 
   # ----------------------------------------------------------------------
   # Find out how we where doing
@@ -372,7 +374,7 @@ sub mtr_report_stats ($) {
 
   if ( $tot_failed != 0 || $found_problems)
   {
-    mtr_error("there were failing test cases");
+    mtr_error("there were failing test cases") unless $dont_error;
   }
 }
 

mysql-test/mysql-test-run.pl

@@ -313,7 +313,7 @@ sub main {
 
   #######################################################################
   my $num_tests= @$tests;
-  if ( not defined $opt_parallel ) {
+  if ( $opt_parallel eq "auto" ) {
     # Try to find a suitable value for number of workers
     my $sys_info= My::SysInfo->new();
 
@@ -528,6 +528,8 @@ sub run_test_server ($$$) {
 	    elsif ($opt_max_test_fail > 0 and
 		   $num_failed_test >= $opt_max_test_fail) {
 	      $suite_timeout_proc->kill();
+	      push(@$completed, $result);
+	      mtr_report_stats($completed, 1);
 	      mtr_report("Too many tests($num_failed_test) failed!",
 			 "Terminating...");
 	      return undef;
@@ -659,6 +661,7 @@ sub run_test_server ($$$) {
     # ----------------------------------------------------
     if ( ! $suite_timeout_proc->wait_one(0) )
     {
+      mtr_report_stats($completed, 1);
       mtr_report("Test suite timeout! Terminating...");
       return undef;
     }
@@ -723,6 +726,8 @@ sub run_worker ($) {
       delete($test->{'comment'});
       delete($test->{'logfile'});
 
+      $test->{worker} = $thread_num if $opt_parallel > 1;
+
       run_testcase($test);
       #$test->{result}= 'MTR_RES_PASSED';
       # Send it back, now with results set
@@ -790,7 +795,7 @@ sub command_line_setup {
              'vs-config'                => \$opt_vs_config,
 
 	     # Max number of parallel threads to use
-	     'parallel=i'               => \$opt_parallel,
+	     'parallel=s'               => \$opt_parallel,
 
              # Config file to use as template for all tests
 	     'defaults-file=s'          => \&collect_option,
@@ -1130,9 +1135,9 @@ sub command_line_setup {
   # --------------------------------------------------------------------------
   # Check parallel value
   # --------------------------------------------------------------------------
-  if ($opt_parallel < 1)
+  if ($opt_parallel ne "auto" && $opt_parallel < 1)
   {
-    mtr_error("0 or negative parallel value makes no sense, use positive number");
+    mtr_error("0 or negative parallel value makes no sense, use 'auto' or positive number");
   }
 
   # --------------------------------------------------------------------------
@@ -5197,6 +5202,7 @@ Misc options
   fast                  Run as fast as possible, dont't wait for servers
                         to shutdown etc.
   parallel=N            Run tests in N parallel threads (default=1)
+                        Use parallel=auto for auto-setting of N
   repeat=N              Run each test N number of times
   retry=N               Retry tests that fail N times, limit number of failures
                         to $opt_retry_failure

mysql-test/r/mysqltest.result

@@ -545,6 +545,8 @@ mysqltest: At line 1: Failed to open file 'non_existing_file'
 mysqltest: At line 1: Missing required argument 'filename' to command 'file_exists'
 mysqltest: At line 1: Missing required argument 'from_file' to command 'copy_file'
 mysqltest: At line 1: Missing required argument 'to_file' to command 'copy_file'
+mysqltest: At line 1: Missing required argument 'from_file' to command 'move_file'
+mysqltest: At line 1: Missing required argument 'to_file' to command 'move_file'
 mysqltest: At line 1: Missing required argument 'mode' to command 'chmod'
 mysqltest: At line 1: You must write a 4 digit octal number for mode
 mysqltest: At line 1: You must write a 4 digit octal number for mode
@@ -697,6 +699,7 @@ statement="SHOW COLUMNS FROM t1" row_number=1, column_name="Type", Value=int(11)
 statement=SHOW COLUMNS FROM t1 row_number=1, column_name=Default, Value=NULL
 value= ->A B<-
 value= 1
+value= 2
 mysqltest: At line 1: query_get_value - argument list started with '(' must be ended with ')'
 mysqltest: At line 1: Missing required argument 'query' to command 'query_get_value'
 mysqltest: At line 1: Missing required argument 'column name' to command 'query_get_value'

mysql-test/suite/funcs_1/datadict/processlist_priv.inc

@@ -212,7 +212,7 @@ GRANT PROCESS ON *.* TO ''@'localhost';
 --echo     anonymous user with PROCESS privilege
 --echo     SHOW/SELECT shows all processes/threads.
 --echo ####################################################################################
-connect (anonymous1,localhost,'',,information_schema);
+connect (anonymous1,localhost,"''",,information_schema);
 SHOW GRANTS;
 --replace_column 1 ID 3 HOST_NAME 6 TIME
 SHOW processlist;
@@ -253,7 +253,7 @@ REVOKE PROCESS ON *.* FROM ''@'localhost';
 
 --echo ####################################################################################
 --echo 7.1 New connection (anonymous2,localhost,'',,information_schema)
-connect (anonymous2,localhost,'',,information_schema);
+connect (anonymous2,localhost,"''",,information_schema);
 --echo     The anonymous user has no more the PROCESS privilege
 --echo     Again only the processes of the anonymous user are visible.
 --echo ####################################################################################

mysql-test/t/connect.test

@@ -55,7 +55,8 @@ disconnect con4;
 connect (fail_con,localhost,test,,test2);
 --replace_result $MASTER_MYSOCK MASTER_SOCKET $MASTER_MYPORT MASTER_PORT
 --error ER_ACCESS_DENIED_ERROR
-connect (fail_con,localhost,test,,"");
+# Need to protect "" within '' so it's interpreted literally
+connect (fail_con,localhost,test,,'""');
 --replace_result $MASTER_MYSOCK MASTER_SOCKET $MASTER_MYPORT MASTER_PORT
 --error ER_ACCESS_DENIED_ERROR
 connect (fail_con,localhost,test,zorro,test2);

mysql-test/t/mysqltest.test

@@ -1780,6 +1780,56 @@ remove_file $MYSQLTEST_VARDIR/tmp/file2.tmp;
 --error 1
 --exec echo "copy_file from_file;" | $MYSQL_TEST 2>&1
 
+
+# ----------------------------------------------------------------------------
+# test for move_file
+# ----------------------------------------------------------------------------
+
+# - Check that if source file does not exist, nothing will be created.
+
+--error 1
+file_exists $MYSQLTEST_VARDIR/tmp/file1.tmp;
+--error 1
+file_exists $MYSQLTEST_VARDIR/tmp/file2.tmp;
+--error 1
+move_file $MYSQLTEST_VARDIR/tmp/file1.tmp $MYSQLTEST_VARDIR/tmp/file2.tmp;
+--error 1
+file_exists $MYSQLTEST_VARDIR/tmp/file1.tmp;
+--error 1
+file_exists $MYSQLTEST_VARDIR/tmp/file2.tmp;
+
+# - Check that if source file exists, everything works properly.
+
+--write_file $MYSQLTEST_VARDIR/tmp/file1.tmp
+file1
+EOF
+
+move_file $MYSQLTEST_VARDIR/tmp/file1.tmp $MYSQLTEST_VARDIR/tmp/file2.tmp;
+--error 1
+file_exists $MYSQLTEST_VARDIR/tmp/file1.tmp;
+file_exists $MYSQLTEST_VARDIR/tmp/file2.tmp;
+
+# - Check that if destination file exists, everything works properly.
+#   (file2.tmp exists from the previous check; file1.tmp needs to be created)
+
+--write_file $MYSQLTEST_VARDIR/tmp/file1.tmp
+file1
+EOF
+
+move_file $MYSQLTEST_VARDIR/tmp/file1.tmp $MYSQLTEST_VARDIR/tmp/file2.tmp;
+--error 1
+file_exists $MYSQLTEST_VARDIR/tmp/file1.tmp;
+file_exists $MYSQLTEST_VARDIR/tmp/file2.tmp;
+remove_file $MYSQLTEST_VARDIR/tmp/file2.tmp;
+
+# - Check usage.
+
+--error 1
+--exec echo "move_file ;" | $MYSQL_TEST 2>&1
+
+--error 1
+--exec echo "move_file from_file;" | $MYSQL_TEST 2>&1
+
 # ----------------------------------------------------------------------------
 # test for chmod
 # ----------------------------------------------------------------------------
@@ -2037,6 +2087,10 @@ let $value= query_get_value(SELECT 'A B' AS "MyColumn", MyColumn, 1);
 let $value= query_get_value(SELECT 1 AS "My Column", My Column, 1);
 --echo value= $value
 #
+# 4.1 Query containing , protected by quotes, quotes also on column
+let $value= query_get_value('SELECT 1 as a, 2 as b', "b", 1);
+--echo value= $value
+#
 #------------ Negative tests ------------
 # 5. Incomplete statement including missing parameters
 # 5.1 incomplete statement

sql/table.cc

@@ -779,7 +779,7 @@ static int open_binary_frm(THD *thd, TABLE_SHARE *share, uchar *head,
   strpos=disk_buff+6;
 
   if (!(rec_per_key= (ulong*) alloc_root(&share->mem_root,
-					 sizeof(ulong*)*key_parts)))
+                                         sizeof(ulong)*key_parts)))
     goto err;
 
   for (i=0 ; i < keys ; i++, keyinfo++)

storage/myisam/myisamchk.c

@@ -287,8 +287,8 @@ static struct my_option my_long_options[] =
    0, 0, 0, GET_NO_ARG, NO_ARG, 0, 0, 0, 0, 0, 0},
   { "key_buffer_size", OPT_KEY_BUFFER_SIZE, "",
     (uchar**) &check_param.use_buffers, (uchar**) &check_param.use_buffers, 0,
-    GET_ULONG, REQUIRED_ARG, (long) USE_BUFFER_INIT, (long) MALLOC_OVERHEAD,
-    (long) ~0L, (long) MALLOC_OVERHEAD, (long) IO_SIZE, 0},
+    GET_ULL, REQUIRED_ARG, USE_BUFFER_INIT, MALLOC_OVERHEAD,
+    SIZE_T_MAX, MALLOC_OVERHEAD,  IO_SIZE, 0},
   { "key_cache_block_size", OPT_KEY_CACHE_BLOCK_SIZE,  "",
     (uchar**) &opt_key_cache_block_size,
     (uchar**) &opt_key_cache_block_size, 0,
@@ -1102,7 +1102,7 @@ static int myisamchk(MI_CHECK *param, char * filename)
       {
 	if (param->testflag & (T_EXTEND | T_MEDIUM))
 	  VOID(init_key_cache(dflt_key_cache,opt_key_cache_block_size,
-                              param->use_buffers, 0, 0));
+                              (size_t) param->use_buffers, 0, 0));
 	VOID(init_io_cache(&param->read_cache,datafile,
 			   (uint) param->read_buffer_length,
 			   READ_CACHE,
@@ -1525,8 +1525,8 @@ static int mi_sort_records(MI_CHECK *param,
   if (share->state.key_root[sort_key] == HA_OFFSET_ERROR)
     DBUG_RETURN(0);				/* Nothing to do */
 
-  init_key_cache(dflt_key_cache, opt_key_cache_block_size, param->use_buffers,
-                 0, 0);
+  init_key_cache(dflt_key_cache, opt_key_cache_block_size,
+                 (size_t) param->use_buffers, 0, 0);
   if (init_io_cache(&info->rec_cache,-1,(uint) param->write_buffer_length,
 		   WRITE_CACHE,share->pack.header_length,1,
 		   MYF(MY_WME | MY_WAIT_IF_FULL)))

storage/myisammrg/ha_myisammrg.cc

@@ -925,11 +925,11 @@ int ha_myisammrg::info(uint flag)
         with such a number, it'll be an error later anyway.
       */
       bzero((char*) table->key_info[0].rec_per_key,
-            sizeof(table->key_info[0].rec_per_key) * table->s->key_parts);
+            sizeof(table->key_info[0].rec_per_key[0]) * table->s->key_parts);
 #endif
       memcpy((char*) table->key_info[0].rec_per_key,
 	     (char*) mrg_info.rec_per_key,
-             sizeof(table->key_info[0].rec_per_key) *
+             sizeof(table->key_info[0].rec_per_key[0]) *
              min(file->keys, table->s->key_parts));
     }
   }