Skip to content

M
mariadb
Commit 5d5bed0b authored by malff@lambda.hsd1.co.comcast.net's avatar malff@lambda.hsd1.co.comcast.net
Browse files
Options

test update

parent 2e0ef942
Show whitespace changes
Inline Side-by-side
Showing with 2594 additions and 1328 deletions
mysql-test/r/ps_ddl.result
View file @ 5d5bed0b
This source diff could not be displayed because it is too large. You can view the blob instead.
mysql-test/t/ps_ddl.test
View file @ 5d5bed0b
......@@ -55,8 +55,28 @@ let $base_count = SELECT VARIABLE_VALUE from
INFORMATION_SCHEMA.SESSION_STATUS where variable_name='COM_STMT_REPREPARE'
into @base_count ;
let $reprepared = SELECT VARIABLE_VALUE - @base_count AS REPREPARED from
INFORMATION_SCHEMA.SESSION_STATUS where variable_name='COM_STMT_REPREPARE' ;
let $check = SELECT CASE (VARIABLE_VALUE - @base_count - @expected)
WHEN 0 THEN "PASSED"
ELSE "FAILED"
END
AS `CHECK`,
(VARIABLE_VALUE - @base_count - @expected) AS `OFFSET`
from INFORMATION_SCHEMA.SESSION_STATUS
where variable_name='COM_STMT_REPREPARE' ;
eval $base_count;
set @expected = 0;
# Maintainer:
# When not expecting a re-prepare, write the test like this:
# execute stmt;
# eval $check;
#
# When expecting a re-prepare, write the test like this:
# set @expected = @expected + 1;
# execute stmt;
# eval $check;
#
--echo =====================================================================
--echo Testing 1: NOTHING -> TABLE transitions
......@@ -66,8 +86,6 @@ INFORMATION_SCHEMA.SESSION_STATUS where variable_name='COM_STMT_REPREPARE' ;
drop table if exists t1;
--enable_warnings
eval $base_count;
# can not be tested since prepare failed
--error ER_NO_SUCH_TABLE
prepare stmt from 'select * from t1';
......@@ -92,23 +110,21 @@ prepare stmt from 'select * from t1';
drop table if exists t4;
--enable_warnings
eval $base_count;
create table t4(a int);
prepare stmt from 'select * from t4';
execute stmt;
eval $reprepared;
eval $check;
execute stmt;
eval $reprepared;
eval $check;
drop table t4;
--error ER_NO_SUCH_TABLE
execute stmt;
eval $reprepared;
eval $check;
--error ER_NO_SUCH_TABLE
execute stmt;
eval $reprepared;
eval $check;
--echo =====================================================================
--echo Testing 5: TABLE -> TABLE (DDL) transitions
......@@ -118,23 +134,21 @@ eval $reprepared;
drop table if exists t5;
--enable_warnings
eval $base_count;
create table t5(a int);
prepare stmt from 'select * from t5';
prepare stmt from 'select a from t5';
execute stmt;
eval $reprepared;
eval $check;
execute stmt;
eval $reprepared;
eval $check;
alter table t5 add column (b int);
# REPREPARED +1
set @expected = @expected + 1;
execute stmt;
eval $reprepared;
eval $check;
execute stmt;
eval $reprepared;
eval $check;
drop table t5;
......@@ -155,17 +169,15 @@ drop table t5;
drop table if exists t6;
--enable_warnings
eval $base_count;
create table t6(a int);
prepare stmt from 'insert into t6(a) value (?)';
set @val=1;
execute stmt using @val;
eval $reprepared;
eval $check;
set @val=2;
execute stmt using @val;
eval $reprepared;
eval $check;
# Relevant trigger: execute should reprepare
delimiter $$;
......@@ -178,25 +190,25 @@ delimiter ;$$
set @message="none";
set @val=3;
# REPREPARED +1
set @expected = @expected + 1;
execute stmt using @val;
eval $reprepared;
eval $check;
select @message;
set @val=4;
execute stmt using @val;
eval $reprepared;
eval $check;
select @message;
prepare stmt from 'insert into t6(a) value (?)';
set @message="none";
set @val=5;
execute stmt using @val;
eval $reprepared;
eval $check;
select @message;
set @message="none";
set @val=6;
execute stmt using @val;
eval $reprepared;
eval $check;
select @message;
# Unrelated trigger: execute can pass of fail, implementation dependent
......@@ -210,25 +222,26 @@ delimiter ;$$
set @message="none";
set @val=7;
set @expected = @expected + 1;
execute stmt using @val;
eval $reprepared;
eval $check;
select @message;
set @message="none";
set @val=8;
execute stmt using @val;
eval $reprepared;
eval $check;
select @message;
prepare stmt from 'insert into t6(a) value (?)';
set @message="none";
set @val=9;
execute stmt using @val;
eval $reprepared;
eval $check;
select @message;
set @message="none";
set @val=10;
execute stmt using @val;
eval $reprepared;
eval $check;
select @message;
# Relevant trigger: execute should reprepare
......@@ -243,25 +256,25 @@ delimiter ;$$
set @message="none";
set @val=11;
# REPREPARED +1
set @expected = @expected + 1;
execute stmt using @val;
eval $reprepared;
eval $check;
select @message;
set @val=12;
execute stmt using @val;
eval $reprepared;
eval $check;
select @message;
prepare stmt from 'insert into t6(a) value (?)';
set @message="none";
set @val=13;
execute stmt using @val;
eval $reprepared;
eval $check;
select @message;
set @message="none";
set @val=14;
execute stmt using @val;
eval $reprepared;
eval $check;
select @message;
# Unrelated trigger: execute can pass of fail, implementation dependent
......@@ -276,63 +289,62 @@ delimiter ;$$
set @message="none";
set @val=15;
set @expected = @expected + 1;
execute stmt using @val;
eval $reprepared;
eval $check;
select @message;
set @message="none";
set @val=16;
execute stmt using @val;
eval $reprepared;
eval $check;
select @message;
prepare stmt from 'insert into t6(a) value (?)';
set @message="none";
set @val=17;
execute stmt using @val;
eval $reprepared;
eval $check;
select @message;
set @message="none";
set @val=18;
execute stmt using @val;
eval $reprepared;
eval $check;
select @message;
drop trigger t6_bi;
set @message="none";
set @val=19;
# safe to re-execute
set @expected = @expected + 1;
execute stmt using @val;
eval $reprepared;
eval $check;
select @message;
set @val=20;
# safe to re-execute
execute stmt using @val;
eval $reprepared;
eval $check;
select @message;
prepare stmt from 'insert into t6(a) value (?)';
set @message="none";
set @val=21;
execute stmt using @val;
eval $reprepared;
eval $check;
select @message;
set @val=22;
execute stmt using @val;
eval $reprepared;
eval $check;
select @message;
drop trigger t6_bd;
set @val=23;
# safe to re-execute
set @expected = @expected + 1;
execute stmt using @val;
eval $reprepared;
eval $check;
select @message;
set @val=24;
# safe to re-execute
execute stmt using @val;
eval $reprepared;
eval $check;
select @message;
select * from t6 order by a;
......@@ -363,8 +375,6 @@ drop function if exists audit_func;
drop view if exists audit_view;
--enable_warnings
eval $base_count;
create table t7_proc(a int);
create table t7_func(a int);
create table t7_view(a int);
......@@ -400,10 +410,10 @@ create trigger t7_table_trigger_bi before insert on t7_dependent_table
prepare stmt_proc from 'insert into t7_proc(a) value (?)';
set @val=101;
execute stmt_proc using @val;
eval $reprepared;
eval $check;
set @val=102;
execute stmt_proc using @val;
eval $reprepared;
eval $check;
drop procedure audit_proc;
......@@ -411,20 +421,21 @@ create procedure audit_proc(a int)
insert into t7_audit values (NULL, a, "proc v2");
set @val=103;
set @expected = @expected + 1;
execute stmt_proc using @val;
eval $reprepared;
eval $check;
set @val=104;
execute stmt_proc using @val;
eval $reprepared;
eval $check;
prepare stmt_func from 'insert into t7_func(a) value (?)';
set @val=201;
execute stmt_func using @val;
eval $reprepared;
eval $check;
set @val=202;
execute stmt_func using @val;
eval $reprepared;
eval $check;
drop function audit_func;
......@@ -432,19 +443,20 @@ create function audit_func() returns varchar(50)
return "func v2";
set @val=203;
set @expected = @expected + 1;
execute stmt_func using @val;
eval $reprepared;
eval $check;
set @val=204;
execute stmt_func using @val;
eval $reprepared;
eval $check;
prepare stmt_view from 'insert into t7_view(a) value (?)';
set @val=301;
execute stmt_view using @val;
eval $reprepared;
eval $check;
set @val=302;
execute stmt_view using @val;
eval $reprepared;
eval $check;
drop view audit_view;
......@@ -455,52 +467,53 @@ create view audit_view as select "view v2" as reason from dual;
# This is because the table trigger is cached and is not invalidated.
set @val=303;
# REPREPARED +1
set @expected = @expected + 1;
execute stmt_view using @val;
eval $reprepared;
eval $check;
set @val=304;
execute stmt_view using @val;
eval $reprepared;
eval $check;
prepare stmt_table from 'insert into t7_table(a) value (?)';
set @val=401;
execute stmt_table using @val;
eval $reprepared;
eval $check;
set @val=402;
execute stmt_table using @val;
eval $reprepared;
eval $check;
alter table t7_dependent_table add column comments varchar(100) default NULL;
set @val=403;
# REPREPARED +1
set @expected = @expected + 1;
--error ER_WRONG_VALUE_COUNT_ON_ROW
execute stmt_table using @val;
eval $reprepared;
eval $check;
set @val=404;
set @expected = @expected + 1;
--error ER_WRONG_VALUE_COUNT_ON_ROW
execute stmt_table using @val;
eval $reprepared;
eval $check;
alter table t7_dependent_table drop column comments;
set @val=405;
# REPREPARED +1
set @expected = @expected + 1;
execute stmt_table using @val;
eval $reprepared;
eval $check;
set @val=406;
execute stmt_table using @val;
eval $reprepared;
eval $check;
prepare stmt_table_trigger from 'insert into t7_table(a) value (?)';
set @val=501;
execute stmt_table_trigger using @val;
eval $reprepared;
eval $check;
set @val=502;
execute stmt_table_trigger using @val;
eval $reprepared;
eval $check;
drop trigger t7_table_trigger_bi;
......@@ -508,12 +521,12 @@ create trigger t7_table_trigger_bi before insert on t7_dependent_table
for each row set NEW.reason="trigger v2";
set @val=503;
# REPREPARED +1
set @expected = @expected + 1;
execute stmt_table_trigger using @val;
eval $reprepared;
eval $check;
set @val=504;
execute stmt_table_trigger using @val;
eval $reprepared;
eval $check;
select * from t7_audit order by new_a;
......@@ -538,24 +551,22 @@ drop view audit_view;
drop table if exists t8;
--enable_warnings
eval $base_count;
create table t8(a int);
prepare stmt from 'select * from t8';
execute stmt;
eval $reprepared;
eval $check;
execute stmt;
eval $reprepared;
eval $check;
drop table t8;
create temporary table t8(a int);
# REPREPARED +1
set @expected = @expected + 1;
execute stmt;
eval $reprepared;
eval $check;
execute stmt;
eval $reprepared;
eval $check;
drop table t8;
......@@ -568,25 +579,23 @@ drop table if exists t9;
drop table if exists t9_b;
--enable_warnings
eval $base_count;
create table t9(a int);
create table t9_b(a int);
prepare stmt from 'select * from t9';
execute stmt;
eval $reprepared;
eval $check;
execute stmt;
eval $reprepared;
eval $check;
drop table t9;
create view t9 as select * from t9_b;
# REPREPARED +1
set @expected = @expected + 1;
execute stmt;
eval $reprepared;
eval $check;
execute stmt;
eval $reprepared;
eval $check;
drop view t9;
drop table t9_b;
......@@ -599,23 +608,21 @@ drop table t9_b;
drop temporary table if exists t10;
--enable_warnings
eval $base_count;
create temporary table t10(a int);
prepare stmt from 'select * from t10';
execute stmt;
eval $reprepared;
eval $check;
execute stmt;
eval $reprepared;
eval $check;
drop temporary table t10;
--error ER_NO_SUCH_TABLE
execute stmt;
eval $reprepared;
eval $check;
--error ER_NO_SUCH_TABLE
execute stmt;
eval $reprepared;
eval $check;
--echo =====================================================================
--echo Testing 11: TEMPORARY TABLE -> TABLE transitions
......@@ -626,25 +633,23 @@ drop table if exists t11;
drop temporary table if exists t11;
--enable_warnings
eval $base_count;
create table t11(a int);
insert into t11(a) value (1);
create temporary table t11(a int);
prepare stmt from 'select * from t11';
execute stmt;
eval $reprepared;
eval $check;
execute stmt;
eval $reprepared;
eval $check;
drop temporary table t11;
# REPREPARED +1
set @expected = @expected + 1;
execute stmt;
eval $reprepared;
eval $check;
execute stmt;
eval $reprepared;
eval $check;
select * from t11;
drop table t11;
......@@ -657,24 +662,22 @@ drop table t11;
drop temporary table if exists t12;
--enable_warnings
eval $base_count;
create temporary table t12(a int);
prepare stmt from 'select * from t12';
prepare stmt from 'select a from t12';
execute stmt;
eval $reprepared;
eval $check;
execute stmt;
eval $reprepared;
eval $check;
drop temporary table t12;
create temporary table t12(a int, b int);
# REPREPARED +1
set @expected = @expected + 1;
execute stmt;
eval $reprepared;
eval $check;
execute stmt;
eval $reprepared;
eval $check;
select * from t12;
drop table t12;
......@@ -688,25 +691,23 @@ drop temporary table if exists t13;
drop table if exists t13_b;
--enable_warnings
eval $base_count;
create temporary table t13(a int);
create table t13_b(a int);
prepare stmt from 'select * from t13';
execute stmt;
eval $reprepared;
eval $check;
execute stmt;
eval $reprepared;
eval $check;
drop temporary table t13;
create view t13 as select * from t13_b;
# REPREPARED +1
set @expected = @expected + 1;
execute stmt;
eval $reprepared;
eval $check;
execute stmt;
eval $reprepared;
eval $check;
drop view t13;
drop table t13_b;
......@@ -720,26 +721,25 @@ drop view if exists t14;
drop table if exists t14_b;
--enable_warnings
eval $base_count;
create table t14_b(a int);
create view t14 as select * from t14_b;
prepare stmt from 'select * from t14';
execute stmt;
eval $reprepared;
eval $check;
execute stmt;
eval $reprepared;
eval $check;
drop view t14;
# REPREPARED +1
set @expected = @expected + 1;
--error ER_NO_SUCH_TABLE
execute stmt;
eval $reprepared;
eval $check;
set @expected = @expected + 1;
--error ER_NO_SUCH_TABLE
execute stmt;
eval $reprepared;
eval $check;
drop table t14_b;
......@@ -752,25 +752,23 @@ drop view if exists t15;
drop table if exists t15_b;
--enable_warnings
eval $base_count;
create table t15_b(a int);
create view t15 as select * from t15_b;
prepare stmt from 'select * from t15';
execute stmt;
eval $reprepared;
eval $check;
execute stmt;
eval $reprepared;
eval $check;
drop view t15;
create table t15(a int);
# REPREPARED +1
set @expected = @expected + 1;
execute stmt;
eval $reprepared;
eval $check;
execute stmt;
eval $reprepared;
eval $check;
drop table t15_b;
drop table t15;
......@@ -784,25 +782,23 @@ drop view if exists t16;
drop table if exists t16_b;
--enable_warnings
eval $base_count;
create table t16_b(a int);
create view t16 as select * from t16_b;
prepare stmt from 'select * from t16';
execute stmt;
eval $reprepared;
eval $check;
execute stmt;
eval $reprepared;
eval $check;
drop view t16;
create temporary table t16(a int);
# REPREPARED +1
set @expected = @expected + 1;
execute stmt;
eval $reprepared;
eval $check;
execute stmt;
eval $reprepared;
eval $check;
drop table t16_b;
drop temporary table t16;
......@@ -816,8 +812,6 @@ drop view if exists t17;
drop table if exists t17_b;
--enable_warnings
eval $base_count;
create table t17_b(a int);
insert into t17_b values (10), (20), (30);
......@@ -826,19 +820,19 @@ select * from t17;
prepare stmt from 'select * from t17';
execute stmt;
eval $reprepared;
eval $check;
execute stmt;
eval $reprepared;
eval $check;
drop view t17;
create view t17 as select a, 2*a as b, 10*a as c from t17_b;
create view t17 as select a, 2*a as b, 5*a as c from t17_b;
select * from t17;
# REPREPARED +1
set @expected = @expected + 1;
execute stmt;
eval $reprepared;
eval $check;
execute stmt;
eval $reprepared;
eval $check;
drop table t17_b;
drop view t17;
......@@ -865,8 +859,6 @@ drop function if exists view_func;
drop view if exists view_view;
--enable_warnings
eval $base_count;
# TODO: insertable view -> trigger
# TODO: insertable view -> trigger -> proc ?
......@@ -886,47 +878,48 @@ create view t18_table as select * from t18;
prepare stmt_func from 'select * from t18_func';
execute stmt_func;
eval $reprepared;
eval $check;
execute stmt_func;
eval $reprepared;
eval $check;
drop function view_func;
create function view_func(x int) returns int
return x*x;
set @expected = @expected + 1;
execute stmt_func;
eval $reprepared;
eval $check;
execute stmt_func;
eval $reprepared;
eval $check;
prepare stmt_view from 'select * from t18_view';
execute stmt_view;
eval $reprepared;
eval $check;
execute stmt_view;
eval $reprepared;
eval $check;
drop view view_view;
create view view_view as select "view v2" as reason from dual;
# REPREPARED +1
set @expected = @expected + 1;
execute stmt_view;
eval $reprepared;
eval $check;
execute stmt_view;
eval $reprepared;
eval $check;
prepare stmt_table from 'select * from t18_table';
execute stmt_table;
eval $reprepared;
eval $check;
execute stmt_table;
eval $reprepared;
eval $check;
alter table t18 add column comments varchar(50) default NULL;
# REPREPARED +1
set @expected = @expected + 1;
execute stmt_table;
eval $reprepared;
eval $check;
execute stmt_table;
eval $reprepared;
eval $check;
drop table t18;
drop table t18_dependent_table;
......@@ -944,8 +937,6 @@ drop view view_view;
drop procedure if exists proc_19;
--enable_warnings
eval $base_count;
# Using a temporary table internally should not confuse the prepared
# statement code, and should not raise ER_PS_INVALIDATED errors
prepare stmt from
......@@ -956,17 +947,17 @@ prepare stmt from
create procedure proc_19() select "hi there";
execute stmt;
eval $reprepared;
eval $check;
execute stmt;
eval $reprepared;
eval $check;
drop procedure proc_19;
create procedure proc_19() select "hi there, again";
execute stmt;
eval $reprepared;
eval $check;
execute stmt;
eval $reprepared;
eval $check;
drop procedure proc_19;
......@@ -974,19 +965,17 @@ drop procedure proc_19;
--echo Testing 20: Special tables (log tables)
--echo =====================================================================
eval $base_count;
prepare stmt from
'select * from mysql.general_log where argument=\'IMPOSSIBLE QUERY STRING\'';
execute stmt;
eval $reprepared;
eval $check;
execute stmt;
eval $reprepared;
eval $check;
execute stmt;
eval $reprepared;
eval $check;
execute stmt;
eval $reprepared;
eval $check;
--echo =====================================================================
--echo Testing 21: Special tables (system tables)
......@@ -996,25 +985,23 @@ eval $reprepared;
drop procedure if exists proc_21;
--enable_warnings
eval $base_count;
prepare stmt from
'select type, db, name from mysql.proc where name=\'proc_21\'';
create procedure proc_21() select "hi there";
execute stmt;
eval $reprepared;
eval $check;
execute stmt;
eval $reprepared;
eval $check;
drop procedure proc_21;
create procedure proc_21() select "hi there, again";
execute stmt;
eval $reprepared;
eval $check;
execute stmt;
eval $reprepared;
eval $check;
drop procedure proc_21;
......@@ -1027,8 +1014,6 @@ drop table if exists t22_b;
drop view if exists t22;
--enable_warnings
eval $base_count;
create table t22_b(a int);
create algorithm=temptable view t22 as select a*a as a2 from t22_b;
......@@ -1041,15 +1026,15 @@ prepare stmt from 'select * from t22';
insert into t22_b values (1), (2), (3);
execute stmt;
eval $reprepared;
eval $check;
execute stmt;
eval $reprepared;
eval $check;
insert into t22_b values (4), (5), (6);
execute stmt;
eval $reprepared;
eval $check;
execute stmt;
eval $reprepared;
eval $check;
drop table t22_b;
drop view t22;
......@@ -1063,8 +1048,6 @@ drop table if exists t23_a;
drop table if exists t23_b;
--enable_warnings
eval $base_count;
create table t23_a(a int);
create table t23_b(b int);
......@@ -1075,16 +1058,16 @@ prepare stmt from 'select * from t23_a join t23_b';
insert into t23_a values (1), (2), (3);
insert into t23_b values (10), (20), (30);
execute stmt;
eval $reprepared;
eval $check;
execute stmt;
eval $reprepared;
eval $check;
insert into t23_a values (4);
insert into t23_b values (40);
execute stmt;
eval $reprepared;
eval $check;
execute stmt;
eval $reprepared;
eval $check;
drop table t23_a;
drop table t23_b;
......@@ -1099,28 +1082,26 @@ drop table t23_b;
drop table if exists t24_alter;
--enable_warnings
eval $base_count;
create table t24_alter(a int);
prepare stmt from 'alter table t24_alter add column b int';
execute stmt;
eval $reprepared;
eval $check;
drop table t24_alter;
create table t24_alter(a1 int, a2 int);
# t24_alter has changed, and it's not a problem
execute stmt;
eval $reprepared;
eval $check;
alter table t24_alter drop column b;
execute stmt;
eval $reprepared;
eval $check;
alter table t24_alter drop column b;
execute stmt;
eval $reprepared;
eval $check;
drop table t24_alter;
......@@ -1135,7 +1116,7 @@ insert into t24_repair values (1), (2), (3);
prepare stmt from 'repair table t24_repair';
execute stmt;
eval $reprepared;
eval $check;
drop table t24_repair;
create table t24_repair(a1 int, a2 int);
......@@ -1143,15 +1124,15 @@ insert into t24_repair values (1, 10), (2, 20), (3, 30);
# t24_repair has changed, and it's not a problem
execute stmt;
eval $reprepared;
eval $check;
alter table t24_repair add column b varchar(50) default NULL;
execute stmt;
eval $reprepared;
eval $check;
alter table t24_repair drop column b;
execute stmt;
eval $reprepared;
eval $check;
drop table t24_repair;
......@@ -1166,7 +1147,7 @@ insert into t24_analyze values (1), (2), (3);
prepare stmt from 'analyze table t24_analyze';
execute stmt;
eval $reprepared;
eval $check;
drop table t24_analyze;
create table t24_analyze(a1 int, a2 int);
......@@ -1174,15 +1155,15 @@ insert into t24_analyze values (1, 10), (2, 20), (3, 30);
# t24_analyze has changed, and it's not a problem
execute stmt;
eval $reprepared;
eval $check;
alter table t24_analyze add column b varchar(50) default NULL;
execute stmt;
eval $reprepared;
eval $check;
alter table t24_analyze drop column b;
execute stmt;
eval $reprepared;
eval $check;
drop table t24_analyze;
......@@ -1197,7 +1178,7 @@ insert into t24_optimize values (1), (2), (3);
prepare stmt from 'optimize table t24_optimize';
execute stmt;
eval $reprepared;
eval $check;
drop table t24_optimize;
create table t24_optimize(a1 int, a2 int);
......@@ -1205,15 +1186,15 @@ insert into t24_optimize values (1, 10), (2, 20), (3, 30);
# t24_optimize has changed, and it's not a problem
execute stmt;
eval $reprepared;
eval $check;
alter table t24_optimize add column b varchar(50) default NULL;
execute stmt;
eval $reprepared;
eval $check;
alter table t24_optimize drop column b;
execute stmt;
eval $reprepared;
eval $check;
drop table t24_optimize;
......@@ -1226,35 +1207,35 @@ drop procedure if exists changing_proc;
prepare stmt from 'show create procedure changing_proc';
--error ER_SP_DOES_NOT_EXIST
execute stmt;
eval $reprepared;
eval $check;
--error ER_SP_DOES_NOT_EXIST
execute stmt;
eval $reprepared;
eval $check;
create procedure changing_proc() begin end;
# changing_proc has changed, and it's not a problem
execute stmt;
eval $reprepared;
eval $check;
execute stmt;
eval $reprepared;
eval $check;
drop procedure changing_proc;
create procedure changing_proc(x int, y int) begin end;
execute stmt;
eval $reprepared;
eval $check;
execute stmt;
eval $reprepared;
eval $check;
drop procedure changing_proc;
--error ER_SP_DOES_NOT_EXIST
execute stmt;
eval $reprepared;
eval $check;
--error ER_SP_DOES_NOT_EXIST
execute stmt;
eval $reprepared;
eval $check;
# SQLCOM_SHOW_CREATE_FUNC:
......@@ -1265,35 +1246,35 @@ drop function if exists changing_func;
prepare stmt from 'show create function changing_func';
--error ER_SP_DOES_NOT_EXIST
execute stmt;
eval $reprepared;
eval $check;
--error ER_SP_DOES_NOT_EXIST
execute stmt;
eval $reprepared;
eval $check;
create function changing_func() returns int return 0;
# changing_proc has changed, and it's not a problem
execute stmt;
eval $reprepared;
eval $check;
execute stmt;
eval $reprepared;
eval $check;
drop function changing_func;
create function changing_func(x int, y int) returns int return x+y;
execute stmt;
eval $reprepared;
eval $check;
execute stmt;
eval $reprepared;
eval $check;
drop function changing_func;
--error ER_SP_DOES_NOT_EXIST
execute stmt;
eval $reprepared;
eval $check;
--error ER_SP_DOES_NOT_EXIST
execute stmt;
eval $reprepared;
eval $check;
# SQLCOM_SHOW_CREATE_TRIGGER:
......@@ -1306,10 +1287,10 @@ create table t24_trigger(a int);
prepare stmt from 'show create trigger t24_bi;';
--error ER_TRG_DOES_NOT_EXIST
execute stmt;
eval $reprepared;
eval $check;
--error ER_TRG_DOES_NOT_EXIST
execute stmt;
eval $reprepared;
eval $check;
delimiter $$;
create trigger t24_bi before insert on t24_trigger for each row
......@@ -1321,9 +1302,9 @@ delimiter ;$$
# t24_bi has changed, and it's not a problem
execute stmt;
eval $reprepared;
eval $check;
execute stmt;
eval $reprepared;
eval $check;
drop trigger t24_bi;
delimiter $$;
......@@ -1335,19 +1316,20 @@ $$
delimiter ;$$
# t24_bi has changed, and it's not a problem
set @expected = @expected + 1;
execute stmt;
eval $reprepared;
eval $check;
execute stmt;
eval $reprepared;
eval $check;
drop trigger t24_bi;
--error ER_TRG_DOES_NOT_EXIST
execute stmt;
eval $reprepared;
eval $check;
--error ER_TRG_DOES_NOT_EXIST
execute stmt;
eval $reprepared;
eval $check;
drop table t24_trigger;
......@@ -1361,23 +1343,21 @@ drop table t24_trigger;
drop table if exists t25_num_col;
--enable_warnings
eval $base_count;
create table t25_num_col(a int);
prepare stmt from 'select * from t25_num_col';
prepare stmt from 'select a from t25_num_col';
execute stmt;
eval $reprepared;
eval $check;
execute stmt;
eval $reprepared;
eval $check;
alter table t25_num_col add column b varchar(50) default NULL;
# REPREPARED +1
set @expected = @expected + 1;
execute stmt;
eval $reprepared;
eval $check;
execute stmt;
eval $reprepared;
eval $check;
drop table t25_num_col;
......@@ -1391,17 +1371,20 @@ create table t25_col_name(a int);
prepare stmt from 'select * from t25_col_name';
execute stmt;
eval $reprepared;
eval $check;
execute stmt;
eval $reprepared;
eval $check;
alter table t25_col_name change a b int;
# REPREPARED +1
set @expected = @expected + 1;
--error ER_PS_REBIND
execute stmt;
eval $reprepared;
eval $check;
set @expected = @expected + 1;
--error ER_PS_REBIND
execute stmt;
eval $reprepared;
eval $check;
drop table t25_col_name;
......@@ -1415,17 +1398,20 @@ create table t25_col_type(a int);
prepare stmt from 'select * from t25_col_type';
execute stmt;
eval $reprepared;
eval $check;
execute stmt;
eval $reprepared;
eval $check;
alter table t25_col_type change a a varchar(10);
# REPREPARED +1
set @expected = @expected + 1;
--error ER_PS_REBIND
execute stmt;
eval $reprepared;
eval $check;
set @expected = @expected + 1;
--error ER_PS_REBIND
execute stmt;
eval $reprepared;
eval $check;
drop table t25_col_type;
......@@ -1439,17 +1425,20 @@ create table t25_col_type_length(a varchar(10));
prepare stmt from 'select * from t25_col_type_length';
execute stmt;
eval $reprepared;
eval $check;
execute stmt;
eval $reprepared;
eval $check;
alter table t25_col_type_length change a a varchar(20);
# REPREPARED +1
set @expected = @expected + 1;
--error ER_PS_REBIND
execute stmt;
eval $reprepared;
eval $check;
set @expected = @expected + 1;
--error ER_PS_REBIND
execute stmt;
eval $reprepared;
eval $check;
drop table t25_col_type_length;
......@@ -1463,17 +1452,20 @@ create table t25_col_null(a varchar(10));
prepare stmt from 'select * from t25_col_null';
execute stmt;
eval $reprepared;
eval $check;
execute stmt;
eval $reprepared;
eval $check;
alter table t25_col_null change a a varchar(10) NOT NULL;
# REPREPARED +1
set @expected = @expected + 1;
--error ER_PS_REBIND
execute stmt;
eval $reprepared;
eval $check;
set @expected = @expected + 1;
--error ER_PS_REBIND
execute stmt;
eval $reprepared;
eval $check;
drop table t25_col_null;
......@@ -1488,22 +1480,23 @@ create table t25_col_default(a int, b int DEFAULT 10);
prepare stmt from 'insert into t25_col_default(a) values (?)';
set @val=1;
execute stmt using @val;
eval $reprepared;
eval $check;
set @val=2;
execute stmt using @val;
eval $reprepared;
eval $check;
alter table t25_col_default change b b int DEFAULT 20;
set @val=3;
# Must insert the correct default value for b
set @expected = @expected + 1;
execute stmt using @val;
eval $reprepared;
eval $check;
set @val=4;
# Must insert the correct default value for b
execute stmt using @val;
eval $reprepared;
eval $check;
select * from t25_col_default;
......@@ -1519,17 +1512,17 @@ create table t25_index(a varchar(10));
prepare stmt from 'select * from t25_index';
execute stmt;
eval $reprepared;
eval $check;
execute stmt;
eval $reprepared;
eval $check;
create index i1 on t25_index(a);
# REPREPARED +1
set @expected = @expected + 1;
execute stmt;
eval $reprepared;
eval $check;
execute stmt;
eval $reprepared;
eval $check;
drop table t25_index;
......@@ -1546,20 +1539,20 @@ show create table t25_index_unique;
prepare stmt from 'select * from t25_index_unique';
execute stmt;
eval $reprepared;
eval $check;
execute stmt;
eval $reprepared;
eval $check;
alter table t25_index_unique drop index i1;
create unique index i1 on t25_index_unique(a, b);
show create table t25_index_unique;
# REPREPARED +1
set @expected = @expected + 1;
execute stmt;
eval $reprepared;
eval $check;
execute stmt;
eval $reprepared;
eval $check;
drop table t25_index_unique;
......@@ -1579,8 +1572,6 @@ drop function if exists func_12093_unrelated;
drop procedure if exists proc_12093;
--enable_warnings
eval $base_count;
connect (con1,localhost,root,,);
connection default;
......@@ -1609,9 +1600,9 @@ prepare stmt_sf from 'select func_12093();';
prepare stmt_sp from 'call proc_12093(func_12093())';
execute stmt_sf;
eval $reprepared;
eval $check;
execute stmt_sp;
eval $reprepared;
eval $check;
connection con1;
......@@ -1622,17 +1613,17 @@ connection default;
# previously, failed with --error 1305
execute stmt_sf;
eval $reprepared;
eval $check;
# previously, failed with --error 1305
execute stmt_sp;
eval $reprepared;
eval $check;
# previously, failed with --error 1305
execute stmt_sf;
eval $reprepared;
eval $check;
# previously, failed with --error 1305
execute stmt_sp;
eval $reprepared;
eval $check;
deallocate prepare stmt_sf;
deallocate prepare stmt_sp;
......@@ -1652,26 +1643,25 @@ drop procedure proc_12093;
drop function if exists func_21294;
--enable_warnings
eval $base_count;
create function func_21294() returns int return 10;
prepare stmt from "select func_21294()";
execute stmt;
eval $reprepared;
eval $check;
drop function func_21294;
create function func_21294() returns int return 10;
# might pass or fail, implementation dependent
execute stmt;
eval $reprepared;
eval $check;
drop function func_21294;
create function func_21294() returns int return 20;
set @expected = @expected + 1;
execute stmt;
eval $reprepared;
eval $check;
deallocate prepare stmt;
drop function func_21294;
......@@ -1687,8 +1677,6 @@ drop table if exists t_27420_101;
drop view if exists v_27420;
--enable_warnings
eval $base_count;
connect (con1,localhost,root,,);
connection default;
......@@ -1706,7 +1694,7 @@ create view v_27420 as select t_27420_100.a X, t_27420_101.a Y
prepare stmt from 'select * from v_27420';
execute stmt;
eval $reprepared;
eval $check;
connection con1;
......@@ -1715,9 +1703,9 @@ create table v_27420(X int, Y int);
connection default;
# REPREPARED +1
set @expected = @expected + 1;
execute stmt;
eval $reprepared;
eval $check;
connection con1;
......@@ -1727,9 +1715,10 @@ create table v_27420 (a int, b int, filler char(200));
connection default;
# REPREPARED +1
set @expected = @expected + 1;
--error ER_PS_REBIND
execute stmt;
eval $reprepared;
eval $check;
disconnect con1;
......@@ -1748,8 +1737,6 @@ drop table if exists t_27430_1;
drop table if exists t_27430_2;
--enable_warnings
eval $base_count;
create table t_27430_1 (a int not null, oref int not null, key(a));
insert into t_27430_1 values
(1, 1),
......@@ -1769,9 +1756,9 @@ prepare stmt from
'select oref, a, a in (select a from t_27430_1 where oref=t_27430_2.oref) Z from t_27430_2';
execute stmt;
eval $reprepared;
eval $check;
execute stmt;
eval $reprepared;
eval $check;
drop table t_27430_1, t_27430_2;
......@@ -1790,11 +1777,14 @@ insert into t_27430_2 values
(NULL, 3),
(NULL, 4);
# REPREPARED +1
set @expected = @expected + 1;
--error ER_PS_REBIND
execute stmt;
eval $reprepared;
eval $check;
set @expected = @expected + 1;
--error ER_PS_REBIND
execute stmt;
eval $reprepared;
eval $check;
deallocate prepare stmt;
drop table t_27430_1;
......@@ -1811,8 +1801,6 @@ drop view if exists v_27690_1;
drop table if exists v_27690_2;
--enable_warnings
eval $base_count;
create table t_27690_1 (a int, b int);
insert into t_27690_1 values (1,1),(2,2);
......@@ -1822,27 +1810,27 @@ create table v_27690_2 as select * from t_27690_1;
prepare stmt from 'select * from v_27690_1, v_27690_2';
execute stmt;
eval $reprepared;
eval $check;
execute stmt;
eval $reprepared;
eval $check;
drop table v_27690_1;
--error ER_NO_SUCH_TABLE
execute stmt;
eval $reprepared;
eval $check;
--error ER_NO_SUCH_TABLE
execute stmt;
eval $reprepared;
eval $check;
create view v_27690_1 as select A.a, A.b from t_27690_1 A, t_27690_1 B;
# REPREPARED +1
set @expected = @expected + 1;
execute stmt;
eval $reprepared;
eval $check;
execute stmt;
eval $reprepared;
eval $check;
deallocate prepare stmt;
drop table t_27690_1;
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7