Skip to content

M
mariadb
Commit caaa692c authored by unknown's avatar unknown
Browse files
Options

mysqld.cc: 

  Put --help first, reorder other options so that they are
  alphabetical. (shouldn't have to use grep to find an option.)
  Move group_concat_max_len to variable part of list.
  Rename character_set_server, collation_server,
  shared_memory_base_name to character-set-server,
  collation-server, shared-memory-base-name.
  Make default-collation message refer to collation-server
  rather than character-set-server.


sql/mysqld.cc:
  Put --help first, reorder other options so that they are
  alphabetical. (shouldn't have to use grep to find an option.)
  Move group_concat_max_len to variable part of list.
  Rename character_set_server, collation_server,
  shared_memory_base_name to character-set-server,
  collation-server, shared-memory-base-name.
  Make default-collation message refer to collation-server
  rather than character-set-server.
parent 41b820a5
Show whitespace changes
Inline Side-by-side
Showing with 213 additions and 203 deletions
sql/mysqld.cc
View file @ caaa692c
......@@ -3973,12 +3973,25 @@ enum options_mysqld
struct my_option my_long_options[] =
{
{"help", '?', "Display this help and exit.",
(gptr*) &opt_help, (gptr*) &opt_help, 0, GET_BOOL, NO_ARG, 0, 0, 0, 0,
0, 0},
#ifdef HAVE_REPLICATION
{"abort-slave-event-count", OPT_ABORT_SLAVE_EVENT_COUNT,
"Option used by mysql-test for debugging and testing of replication.",
(gptr*) &abort_slave_event_count, (gptr*) &abort_slave_event_count,
0, GET_INT, REQUIRED_ARG, 0, 0, 0, 0, 0, 0},
#endif /* HAVE_REPLICATION */
{"ansi", 'a', "Use ANSI SQL syntax instead of MySQL syntax.", 0, 0, 0,
GET_NO_ARG, NO_ARG, 0, 0, 0, 0, 0, 0},
{"basedir", 'b',
"Path to installation directory. All paths are usually resolved relative to this.",
(gptr*) &mysql_home_ptr, (gptr*) &mysql_home_ptr, 0, GET_STR, REQUIRED_ARG,
0, 0, 0, 0, 0, 0},
{"bdb", OPT_BDB, "Enable Berkeley DB (if this version of MySQL supports it). \
Disable with --skip-bdb (will save memory).",
(gptr*) &opt_bdb, (gptr*) &opt_bdb, 0, GET_BOOL, NO_ARG, 1, 0, 0,
0, 0, 0},
#ifdef HAVE_BERKELEY_DB
{"bdb-home", OPT_BDB_HOME, "Berkeley home directory.", (gptr*) &berkeley_home,
(gptr*) &berkeley_home, 0, GET_STR, REQUIRED_ARG, 0, 0, 0, 0, 0, 0},
......@@ -3995,10 +4008,6 @@ struct my_option my_long_options[] =
"Disable synchronously flushing logs. This option is deprecated, use --skip-sync-bdb-logs or sync-bdb-logs=0 instead",
// (gptr*) &opt_sync_bdb_logs, (gptr*) &opt_sync_bdb_logs, 0, GET_BOOL,
0, 0, 0, GET_NO_ARG, NO_ARG, 0, 0, 0, 0, 0, 0},
{"sync-bdb-logs", OPT_BDB_SYNC,
"Synchronously flush logs. Enabled by default",
(gptr*) &opt_sync_bdb_logs, (gptr*) &opt_sync_bdb_logs, 0, GET_BOOL,
NO_ARG, 1, 0, 0, 0, 0, 0},
{"bdb-shared-data", OPT_BDB_SHARED,
"Start Berkeley DB in multi-process mode.", 0, 0, 0, GET_NO_ARG, NO_ARG, 0,
0, 0, 0, 0, 0},
......@@ -4006,70 +4015,51 @@ struct my_option my_long_options[] =
(gptr*) &berkeley_tmpdir, (gptr*) &berkeley_tmpdir, 0, GET_STR,
REQUIRED_ARG, 0, 0, 0, 0, 0, 0},
#endif /* HAVE_BERKELEY_DB */
{"sync-frm", OPT_SYNC_FRM, "Sync .frm to disk on create. Enabled by default",
(gptr*) &opt_sync_frm, (gptr*) &opt_sync_frm, 0, GET_BOOL, NO_ARG, 1, 0,
0, 0, 0, 0},
{"bdb", OPT_BDB, "Enable Berkeley DB (if this version of MySQL supports it). \
Disable with --skip-bdb (will save memory).",
(gptr*) &opt_bdb, (gptr*) &opt_bdb, 0, GET_BOOL, NO_ARG, 1, 0, 0,
0, 0, 0},
{"big-tables", OPT_BIG_TABLES,
"Allow big result sets by saving all temporary sets on file (Solves most 'table full' errors).",
0, 0, 0, GET_NO_ARG, NO_ARG, 0, 0, 0, 0, 0, 0},
{"bind-address", OPT_BIND_ADDRESS, "IP address to bind to.",
(gptr*) &my_bind_addr_str, (gptr*) &my_bind_addr_str, 0, GET_STR,
REQUIRED_ARG, 0, 0, 0, 0, 0, 0},
{"binlog-do-db", OPT_BINLOG_DO_DB,
"Tells the master it should log updates for the specified database, and exclude all others not explicitly mentioned.",
0, 0, 0, GET_STR, REQUIRED_ARG, 0, 0, 0, 0, 0, 0},
{"binlog-ignore-db", OPT_BINLOG_IGNORE_DB,
"Tells the master that updates to the given database should not be logged tothe binary log.",
0, 0, 0, GET_STR, REQUIRED_ARG, 0, 0, 0, 0, 0, 0},
{"bind-address", OPT_BIND_ADDRESS, "IP address to bind to.",
(gptr*) &my_bind_addr_str, (gptr*) &my_bind_addr_str, 0, GET_STR,
REQUIRED_ARG, 0, 0, 0, 0, 0, 0},
{"bootstrap", OPT_BOOTSTRAP, "Used by mysql installation scripts.", 0, 0, 0,
GET_NO_ARG, NO_ARG, 0, 0, 0, 0, 0, 0},
{"character_set_server", 'C', "Set the default character set.",
{"character-set-server", 'C', "Set the default character set.",
(gptr*) &default_character_set_name, (gptr*) &default_character_set_name,
0, GET_STR, REQUIRED_ARG, 0, 0, 0, 0, 0, 0 },
{"collation_server", OPT_DEFAULT_COLLATION, "Set the default collation.",
{"character-sets-dir", OPT_CHARSETS_DIR,
"Directory where character sets are.", (gptr*) &charsets_dir,
(gptr*) &charsets_dir, 0, GET_STR, REQUIRED_ARG, 0, 0, 0, 0, 0, 0},
{"chroot", 'r', "Chroot mysqld daemon during startup.",
(gptr*) &mysqld_chroot, (gptr*) &mysqld_chroot, 0, GET_STR, REQUIRED_ARG,
0, 0, 0, 0, 0, 0},
{"collation-server", OPT_DEFAULT_COLLATION, "Set the default collation.",
(gptr*) &default_collation_name, (gptr*) &default_collation_name,
0, GET_STR, REQUIRED_ARG, 0, 0, 0, 0, 0, 0 },
{"concurrent-insert", OPT_CONCURRENT_INSERT,
"Use concurrent insert with MyISAM. Disable with --skip-concurrent-insert.",
(gptr*) &myisam_concurrent_insert, (gptr*) &myisam_concurrent_insert,
0, GET_BOOL, NO_ARG, 1, 0, 0, 0, 0, 0},
{"console", OPT_CONSOLE, "Write error output on screen; Don't remove the console window on windows.",
(gptr*) &opt_console, (gptr*) &opt_console, 0, GET_BOOL, NO_ARG, 0, 0, 0,
0, 0, 0},
#ifdef __WIN__
{"standalone", OPT_STANDALONE,
"Dummy option to start as a standalone program (NT).", 0, 0, 0, GET_NO_ARG,
NO_ARG, 0, 0, 0, 0, 0, 0},
#endif
{"core-file", OPT_WANT_CORE, "Write core on errors.", 0, 0, 0, GET_NO_ARG,
NO_ARG, 0, 0, 0, 0, 0, 0},
{"chroot", 'r', "Chroot mysqld daemon during startup.",
(gptr*) &mysqld_chroot, (gptr*) &mysqld_chroot, 0, GET_STR, REQUIRED_ARG,
0, 0, 0, 0, 0, 0},
{"character-sets-dir", OPT_CHARSETS_DIR,
"Directory where character sets are.", (gptr*) &charsets_dir,
(gptr*) &charsets_dir, 0, GET_STR, REQUIRED_ARG, 0, 0, 0, 0, 0, 0},
{"datadir", 'h', "Path to the database root.", (gptr*) &mysql_data_home,
(gptr*) &mysql_data_home, 0, GET_STR, REQUIRED_ARG, 0, 0, 0, 0, 0, 0},
#ifndef DBUG_OFF
{"debug", '#', "Debug log.", (gptr*) &default_dbug_option,
(gptr*) &default_dbug_option, 0, GET_STR, OPT_ARG, 0, 0, 0, 0, 0, 0},
#ifdef SAFEMALLOC
{"skip-safemalloc", OPT_SKIP_SAFEMALLOC,
"Don't use the memory allocation checking.", 0, 0, 0, GET_NO_ARG, NO_ARG,
0, 0, 0, 0, 0, 0},
#endif
#endif
#ifdef HAVE_OPENSSL
{"des-key-file", OPT_DES_KEY_FILE,
"Load keys for des_encrypt() and des_encrypt from given file.",
(gptr*) &des_key_file, (gptr*) &des_key_file, 0, GET_STR, REQUIRED_ARG,
0, 0, 0, 0, 0, 0},
#endif /* HAVE_OPENSSL */
{"default-character-set", 'C', "Set the default character set (Deprecated option, use character_set_server instead).",
{"default-character-set", 'C', "Set the default character set (deprecated option, use --character-set-server instead).",
(gptr*) &default_character_set_name, (gptr*) &default_character_set_name,
0, GET_STR, REQUIRED_ARG, 0, 0, 0, 0, 0, 0 },
{"default-collation", OPT_DEFAULT_COLLATION, "Set the default collation (Deprecated option, use character_set_server instead).",
{"default-collation", OPT_DEFAULT_COLLATION, "Set the default collation (deprecated option, use --collation-server instead).",
(gptr*) &default_collation_name, (gptr*) &default_collation_name,
0, GET_STR, REQUIRED_ARG, 0, 0, 0, 0, 0, 0 },
{"default-storage-engine", OPT_STORAGE_ENGINE,
......@@ -4086,6 +4076,19 @@ Disable with --skip-bdb (will save memory).",
{"delay-key-write-for-all-tables", OPT_DELAY_KEY_WRITE_ALL,
"Don't flush key buffers between writes for any MyISAM table (Deprecated option, use --delay-key-write=all instead).",
0, 0, 0, GET_NO_ARG, NO_ARG, 0, 0, 0, 0, 0, 0},
#ifdef HAVE_OPENSSL
{"des-key-file", OPT_DES_KEY_FILE,
"Load keys for des_encrypt() and des_encrypt from given file.",
(gptr*) &des_key_file, (gptr*) &des_key_file, 0, GET_STR, REQUIRED_ARG,
0, 0, 0, 0, 0, 0},
#endif /* HAVE_OPENSSL */
#ifdef HAVE_REPLICATION
{"disconnect-slave-event-count", OPT_DISCONNECT_SLAVE_EVENT_COUNT,
"Option used by mysql-test for debugging and testing of replication.",
(gptr*) &disconnect_slave_event_count,
(gptr*) &disconnect_slave_event_count, 0, GET_INT, REQUIRED_ARG, 0, 0, 0,
0, 0, 0},
#endif /* HAVE_REPLICATION */
{"enable-locking", OPT_ENABLE_LOCK,
"Deprecated option, use --external-locking instead.",
(gptr*) &opt_external_locking, (gptr*) &opt_external_locking,
......@@ -4098,46 +4101,49 @@ Disable with --skip-bdb (will save memory).",
{"enable-pstack", OPT_DO_PSTACK, "Print a symbolic stack trace on failure.",
(gptr*) &opt_do_pstack, (gptr*) &opt_do_pstack, 0, GET_BOOL, NO_ARG, 0, 0,
0, 0, 0, 0},
#ifdef HAVE_SMEM
{"shared-memory", OPT_ENABLE_SHARED_MEMORY,
"Enable the shared memory.",(gptr*) &opt_enable_shared_memory, (gptr*) &opt_enable_shared_memory,
0, GET_BOOL, NO_ARG, 0, 0, 0, 0, 0, 0},
#endif
{"exit-info", 'T', "Used for debugging; Use at your own risk!", 0, 0, 0,
GET_LONG, OPT_ARG, 0, 0, 0, 0, 0, 0},
{"external-locking", OPT_USE_LOCKING, "Use system (external) locking. With this option enabled you can run myisamchk to test (not repair) tables while the MySQL server is running.",
(gptr*) &opt_external_locking, (gptr*) &opt_external_locking,
0, GET_BOOL, NO_ARG, 0, 0, 0, 0, 0, 0},
{"flush", OPT_FLUSH, "Flush tables to disk between SQL commands.", 0, 0, 0,
GET_NO_ARG, NO_ARG, 0, 0, 0, 0, 0, 0},
{ "group_concat_max_len", OPT_GROUP_CONCAT_MAX_LEN,
"The maximum length of the result of function group_concat.",
(gptr*) &global_system_variables.group_concat_max_len,
(gptr*) &max_system_variables.group_concat_max_len, 0, GET_ULONG,
REQUIRED_ARG, 1024, 4, (long) ~0, 0, 1, 0},
/* We must always support the next option to make scripts like mysqltest
easier to do */
{"gdb", OPT_DEBUGGING,
"Set up signals usable for debugging",
(gptr*) &opt_debugging, (gptr*) &opt_debugging,
0, GET_BOOL, NO_ARG, 0, 0, 0, 0, 0, 0},
{"init-connect", OPT_INIT_CONNECT, "Command(s) that are executed for each new connection",
(gptr*) &opt_init_connect, (gptr*) &opt_init_connect, 0, GET_STR_ALLOC,
REQUIRED_ARG, 0, 0, 0, 0, 0, 0},
{"init-file", OPT_INIT_FILE, "Read SQL commands from this file at startup.",
(gptr*) &opt_init_file, (gptr*) &opt_init_file, 0, GET_STR, REQUIRED_ARG,
0, 0, 0, 0, 0, 0},
{"init-rpl-role", OPT_INIT_RPL_ROLE, "Set the replication role.", 0, 0, 0,
GET_STR, REQUIRED_ARG, 0, 0, 0, 0, 0, 0},
{"init-slave", OPT_INIT_SLAVE, "Command(s) that are executed when a slave connects to this master",
(gptr*) &opt_init_slave, (gptr*) &opt_init_slave, 0, GET_STR_ALLOC,
REQUIRED_ARG, 0, 0, 0, 0, 0, 0},
{"innodb", OPT_INNODB, "Enable InnoDB (if this version of MySQL supports it). \
Disable with --skip-innodb (will save memory).",
(gptr*) &opt_innodb, (gptr*) &opt_innodb, 0, GET_BOOL, NO_ARG, 1, 0, 0,
0, 0, 0},
{"innodb_data_file_path", OPT_INNODB_DATA_FILE_PATH,
"Path to individual files and their sizes.",
0, 0, 0, GET_STR, REQUIRED_ARG, 0, 0, 0, 0, 0, 0},
#ifdef HAVE_INNOBASE_DB
{"innodb_data_home_dir", OPT_INNODB_DATA_HOME_DIR,
"The common part for Innodb table spaces.", (gptr*) &innobase_data_home_dir,
"The common part for InnoDB table spaces.", (gptr*) &innobase_data_home_dir,
(gptr*) &innobase_data_home_dir, 0, GET_STR, REQUIRED_ARG, 0, 0, 0, 0, 0,
0},
{"innodb_log_group_home_dir", OPT_INNODB_LOG_GROUP_HOME_DIR,
"Path to innodb log files.", (gptr*) &innobase_log_group_home_dir,
(gptr*) &innobase_log_group_home_dir, 0, GET_STR, REQUIRED_ARG, 0, 0, 0, 0,
0, 0},
{"innodb_log_arch_dir", OPT_INNODB_LOG_ARCH_DIR,
"Where full logs should be archived.", (gptr*) &innobase_log_arch_dir,
(gptr*) &innobase_log_arch_dir, 0, GET_STR, REQUIRED_ARG, 0, 0, 0, 0, 0, 0},
{"innodb_log_archive", OPT_INNODB_LOG_ARCHIVE,
"Set to 1 if you want to have logs archived.", 0, 0, 0, GET_LONG, OPT_ARG,
0, 0, 0, 0, 0, 0},
{"innodb_fast_shutdown", OPT_INNODB_FAST_SHUTDOWN,
"Speeds up server shutdown process.", (gptr*) &innobase_fast_shutdown,
(gptr*) &innobase_fast_shutdown, 0, GET_BOOL, OPT_ARG, 1, 0, 0, 0, 0, 0},
{"innodb_file_per_table", OPT_INNODB_FILE_PER_TABLE,
"Stores each InnoDB table to an .ibd file in the database dir.",
(gptr*) &innobase_file_per_table,
(gptr*) &innobase_file_per_table, 0, GET_BOOL, NO_ARG, 0, 0, 0, 0, 0, 0},
{"innodb_flush_log_at_trx_commit", OPT_INNODB_FLUSH_LOG_AT_TRX_COMMIT,
"Set to 0 (write and flush once per second), 1 (write and flush at each commit) or 2 (write at commit, flush once per second).",
(gptr*) &innobase_flush_log_at_trx_commit,
......@@ -4147,38 +4153,28 @@ Disable with --skip-bdb (will save memory).",
"With which method to flush data.", (gptr*) &innobase_unix_file_flush_method,
(gptr*) &innobase_unix_file_flush_method, 0, GET_STR, REQUIRED_ARG, 0, 0, 0,
0, 0, 0},
{"innodb_fast_shutdown", OPT_INNODB_FAST_SHUTDOWN,
"Speeds up server shutdown process.", (gptr*) &innobase_fast_shutdown,
(gptr*) &innobase_fast_shutdown, 0, GET_BOOL, OPT_ARG, 1, 0, 0, 0, 0, 0},
{"innodb_max_dirty_pages_pct", OPT_INNODB_MAX_DIRTY_PAGES_PCT,
"Percentage of dirty pages allowed in bufferpool.", (gptr*) &srv_max_buf_pool_modified_pct,
(gptr*) &srv_max_buf_pool_modified_pct, 0, GET_ULONG, REQUIRED_ARG, 90, 0, 100, 0, 0, 0},
{"innodb_file_per_table", OPT_INNODB_FILE_PER_TABLE,
"Stores each InnoDB table to an .ibd file in the database dir.",
(gptr*) &innobase_file_per_table,
(gptr*) &innobase_file_per_table, 0, GET_BOOL, NO_ARG, 0, 0, 0, 0, 0, 0},
{"innodb_locks_unsafe_for_binlog", OPT_INNODB_LOCKS_UNSAFE_FOR_BINLOG,
"Force Innodb not to use next-key locking. Instead use only row-level locking",
"Force InnoDB not to use next-key locking. Instead use only row-level locking",
(gptr*) &innobase_locks_unsafe_for_binlog,
(gptr*) &innobase_locks_unsafe_for_binlog, 0, GET_BOOL, NO_ARG, 0, 0, 0, 0, 0, 0},
#endif /* End HAVE_INNOBASE_DB */
{"init-connect", OPT_INIT_CONNECT, "Command(s) that are executed for each new connection",
(gptr*) &opt_init_connect, (gptr*) &opt_init_connect, 0, GET_STR_ALLOC,
REQUIRED_ARG, 0, 0, 0, 0, 0, 0},
{"init-slave", OPT_INIT_SLAVE, "Command(s) that are executed when a slave connects to this master",
(gptr*) &opt_init_slave, (gptr*) &opt_init_slave, 0, GET_STR_ALLOC,
REQUIRED_ARG, 0, 0, 0, 0, 0, 0},
{"help", '?', "Display this help and exit.",
(gptr*) &opt_help, (gptr*) &opt_help, 0, GET_BOOL, NO_ARG, 0, 0, 0, 0,
0, 0},
{"verbose", 'v', "Used with --help option for detailed help",
(gptr*) &opt_verbose, (gptr*) &opt_verbose, 0, GET_BOOL, NO_ARG, 0, 0, 0, 0,
0, 0},
{"init-file", OPT_INIT_FILE, "Read SQL commands from this file at startup.",
(gptr*) &opt_init_file, (gptr*) &opt_init_file, 0, GET_STR, REQUIRED_ARG,
{"innodb_log_arch_dir", OPT_INNODB_LOG_ARCH_DIR,
"Where full logs should be archived.", (gptr*) &innobase_log_arch_dir,
(gptr*) &innobase_log_arch_dir, 0, GET_STR, REQUIRED_ARG, 0, 0, 0, 0, 0, 0},
{"innodb_log_archive", OPT_INNODB_LOG_ARCHIVE,
"Set to 1 if you want to have logs archived.", 0, 0, 0, GET_LONG, OPT_ARG,
0, 0, 0, 0, 0, 0},
{"log", 'l', "Log connections and queries to file.", (gptr*) &opt_logname,
(gptr*) &opt_logname, 0, GET_STR, OPT_ARG, 0, 0, 0, 0, 0, 0},
{"innodb_log_group_home_dir", OPT_INNODB_LOG_GROUP_HOME_DIR,
"Path to InnoDB log files.", (gptr*) &innobase_log_group_home_dir,
(gptr*) &innobase_log_group_home_dir, 0, GET_STR, REQUIRED_ARG, 0, 0, 0, 0,
0, 0},
{"innodb_max_dirty_pages_pct", OPT_INNODB_MAX_DIRTY_PAGES_PCT,
"Percentage of dirty pages allowed in bufferpool.", (gptr*) &srv_max_buf_pool_modified_pct,
(gptr*) &srv_max_buf_pool_modified_pct, 0, GET_ULONG, REQUIRED_ARG, 90, 0, 100, 0, 0, 0},
#endif /* End HAVE_INNOBASE_DB */
{"isam", OPT_ISAM, "Enable ISAM (if this version of MySQL supports it). \
Disable with --skip-isam.",
(gptr*) &opt_isam, (gptr*) &opt_isam, 0, GET_BOOL, NO_ARG, 1, 0, 0,
0, 0, 0},
{"language", 'L',
"Client error messages in given language. May be given as a full path.",
(gptr*) &language_ptr, (gptr*) &language_ptr, 0, GET_STR, REQUIRED_ARG,
......@@ -4188,6 +4184,8 @@ Disable with --skip-bdb (will save memory).",
(gptr*) &opt_local_infile,
(gptr*) &opt_local_infile, 0, GET_BOOL, OPT_ARG,
1, 0, 0, 0, 0, 0},
{"log", 'l', "Log connections and queries to file.", (gptr*) &opt_logname,
(gptr*) &opt_logname, 0, GET_STR, OPT_ARG, 0, 0, 0, 0, 0, 0},
{"log-bin", OPT_BIN_LOG,
"Log update queries in binary format.",
(gptr*) &opt_bin_logname, (gptr*) &opt_bin_logname, 0, GET_STR_ALLOC,
......@@ -4196,45 +4194,57 @@ Disable with --skip-bdb (will save memory).",
"File that holds the names for last binary log files.",
(gptr*) &opt_binlog_index_name, (gptr*) &opt_binlog_index_name, 0, GET_STR,
REQUIRED_ARG, 0, 0, 0, 0, 0, 0},
{"log-error", OPT_ERROR_LOG_FILE, "Log error file.",
(gptr*) &log_error_file_ptr, (gptr*) &log_error_file_ptr, 0, GET_STR,
OPT_ARG, 0, 0, 0, 0, 0, 0},
{"log-isam", OPT_ISAM_LOG, "Log all MyISAM changes to file.",
(gptr*) &myisam_log_filename, (gptr*) &myisam_log_filename, 0, GET_STR,
OPT_ARG, 0, 0, 0, 0, 0, 0},
{"log-update", OPT_UPDATE_LOG,
"Log updates to file.# where # is a unique number if not given.",
(gptr*) &opt_update_logname, (gptr*) &opt_update_logname, 0, GET_STR,
OPT_ARG, 0, 0, 0, 0, 0, 0},
{"log-slow-queries", OPT_SLOW_QUERY_LOG,
"Log slow queries to this log file. Defaults logging to hostname-slow.log file.",
(gptr*) &opt_slow_logname, (gptr*) &opt_slow_logname, 0, GET_STR, OPT_ARG,
0, 0, 0, 0, 0, 0},
{"log-long-format", '0',
"Log some extra information to update log. Please note that this option is deprecated; see --log-short-format option.",
0, 0, 0, GET_NO_ARG, NO_ARG, 0, 0, 0, 0, 0, 0},
{"log-short-format", OPT_SHORT_LOG_FORMAT,
"Don't log extra information to update and slow-query logs.",
(gptr*) &opt_short_log_format, (gptr*) &opt_short_log_format,
0, GET_BOOL, NO_ARG, 0, 0, 0, 0, 0, 0},
{"log-queries-not-using-indexes", OPT_LOG_QUERIES_NOT_USING_INDEXES,
"Log queries that are executed without benefit of any index.",
(gptr*) &opt_log_queries_not_using_indexes, (gptr*) &opt_log_queries_not_using_indexes,
0, GET_BOOL, NO_ARG, 0, 0, 0, 0, 0, 0},
{"log-short-format", OPT_SHORT_LOG_FORMAT,
"Don't log extra information to update and slow-query logs.",
(gptr*) &opt_short_log_format, (gptr*) &opt_short_log_format,
0, GET_BOOL, NO_ARG, 0, 0, 0, 0, 0, 0},
{"log-slave-updates", OPT_LOG_SLAVE_UPDATES,
"Tells the slave to log the updates from the slave thread to the binary log. You will need to turn it on if you plan to daisy-chain the slaves.",
(gptr*) &opt_log_slave_updates, (gptr*) &opt_log_slave_updates, 0, GET_BOOL,
NO_ARG, 0, 0, 0, 0, 0, 0},
{"log-slow-queries", OPT_SLOW_QUERY_LOG,
"Log slow queries to this log file. Defaults logging to hostname-slow.log file.",
(gptr*) &opt_slow_logname, (gptr*) &opt_slow_logname, 0, GET_STR, OPT_ARG,
0, 0, 0, 0, 0, 0},
{"log-update", OPT_UPDATE_LOG,
"Log updates to file.# where # is a unique number if not given.",
(gptr*) &opt_update_logname, (gptr*) &opt_update_logname, 0, GET_STR,
OPT_ARG, 0, 0, 0, 0, 0, 0},
{"log-warnings", 'W', "Log some not critical warnings to the log file. Use this option twice, or --log-warnings=2 if you want 'Aborted connections' warning to be logged in the error log file.",
(gptr*) &global_system_variables.log_warnings,
(gptr*) &max_system_variables.log_warnings, 0, GET_ULONG, OPT_ARG, 1, 0, 0,
0, 0, 0},
{"low-priority-updates", OPT_LOW_PRIORITY_UPDATES,
"INSERT/DELETE/UPDATE has lower priority than selects.",
(gptr*) &global_system_variables.low_priority_updates,
(gptr*) &max_system_variables.low_priority_updates,
0, GET_BOOL, NO_ARG, 0, 0, 0, 0, 0, 0},
{"master-connect-retry", OPT_MASTER_CONNECT_RETRY,
"The number of seconds the slave thread will sleep before retrying to connect to the master in case the master goes down or the connection is lost.",
(gptr*) &master_connect_retry, (gptr*) &master_connect_retry, 0, GET_UINT,
REQUIRED_ARG, 60, 0, 0, 0, 0, 0},
{"master-host", OPT_MASTER_HOST,
"Master hostname or IP address for replication. If not set, the slave thread will not be started. Note that the setting of master-host will be ignored if there exists a valid master.info file.",
(gptr*) &master_host, (gptr*) &master_host, 0, GET_STR, REQUIRED_ARG, 0, 0,
0, 0, 0, 0},
{"master-user", OPT_MASTER_USER,
"The username the slave thread will use for authentication when connecting to the master. The user must have FILE privilege. If the master user is not set, user test is assumed. The value in master.info will take precedence if it can be read.",
(gptr*) &master_user, (gptr*) &master_user, 0, GET_STR, REQUIRED_ARG, 0, 0,
0, 0, 0, 0},
{"master-info-file", OPT_MASTER_INFO_FILE,
"The location and name of the file that remembers the master and where the I/O replication \
thread is in the master's binlogs.",
(gptr*) &master_info_file, (gptr*) &master_info_file, 0, GET_STR,
REQUIRED_ARG, 0, 0, 0, 0, 0, 0},
{"master-password", OPT_MASTER_PASSWORD,
"The password the slave thread will authenticate with when connecting to the master. If not set, an empty password is assumed.The value in master.info will take precedence if it can be read.",
(gptr*)&master_password, (gptr*)&master_password, 0,
......@@ -4243,32 +4253,14 @@ Disable with --skip-bdb (will save memory).",
"The port the master is listening on. If not set, the compiled setting of MYSQL_PORT is assumed. If you have not tinkered with configure options, this should be 3306. The value in master.info will take precedence if it can be read.",
(gptr*) &master_port, (gptr*) &master_port, 0, GET_UINT, REQUIRED_ARG,
MYSQL_PORT, 0, 0, 0, 0, 0},
{"master-connect-retry", OPT_MASTER_CONNECT_RETRY,
"The number of seconds the slave thread will sleep before retrying to connect to the master in case the master goes down or the connection is lost.",
(gptr*) &master_connect_retry, (gptr*) &master_connect_retry, 0, GET_UINT,
REQUIRED_ARG, 60, 0, 0, 0, 0, 0},
{"master-retry-count", OPT_MASTER_RETRY_COUNT,
"The number of tries the slave will make to connect to the master before giving up.",
(gptr*) &master_retry_count, (gptr*) &master_retry_count, 0, GET_ULONG,
REQUIRED_ARG, 3600*24, 0, 0, 0, 0, 0},
{"master-info-file", OPT_MASTER_INFO_FILE,
"The location and name of the file that remembers the master and where the I/O replication \
thread is in the master's binlogs.",
(gptr*) &master_info_file, (gptr*) &master_info_file, 0, GET_STR,
REQUIRED_ARG, 0, 0, 0, 0, 0, 0},
{"master-ssl", OPT_MASTER_SSL,
"Enable the slave to connect to the master using SSL.",
(gptr*) &master_ssl, (gptr*) &master_ssl, 0, GET_BOOL, NO_ARG, 0, 0, 0, 0,
0, 0},
{"master-ssl-key", OPT_MASTER_SSL_KEY,
"Master SSL keyfile name. Only applies if you have enabled master-ssl.",
(gptr*) &master_ssl_key, (gptr*) &master_ssl_key, 0, GET_STR, OPT_ARG,
0, 0, 0, 0, 0, 0},
{"master-ssl-cert", OPT_MASTER_SSL_CERT,
"Master SSL certificate file name. Only applies if you have enabled \
master-ssl",
(gptr*) &master_ssl_cert, (gptr*) &master_ssl_cert, 0, GET_STR, OPT_ARG,
0, 0, 0, 0, 0, 0},
{"master-ssl-ca", OPT_MASTER_SSL_CA,
"Master SSL CA file. Only applies if you have enabled master-ssl.",
(gptr*) &master_ssl_ca, (gptr*) &master_ssl_ca, 0, GET_STR, OPT_ARG,
......@@ -4277,39 +4269,39 @@ master-ssl",
"Master SSL CA path. Only applies if you have enabled master-ssl.",
(gptr*) &master_ssl_capath, (gptr*) &master_ssl_capath, 0, GET_STR, OPT_ARG,
0, 0, 0, 0, 0, 0},
{"master-ssl-cert", OPT_MASTER_SSL_CERT,
"Master SSL certificate file name. Only applies if you have enabled \
master-ssl",
(gptr*) &master_ssl_cert, (gptr*) &master_ssl_cert, 0, GET_STR, OPT_ARG,
0, 0, 0, 0, 0, 0},
{"master-ssl-cipher", OPT_MASTER_SSL_CIPHER,
"Master SSL cipher. Only applies if you have enabled master-ssl.",
(gptr*) &master_ssl_cipher, (gptr*) &master_ssl_capath, 0, GET_STR, OPT_ARG,
0, 0, 0, 0, 0, 0},
{"myisam-recover", OPT_MYISAM_RECOVER,
"Syntax: myisam-recover[=option[,option...]], where option can be DEFAULT, BACKUP, FORCE or QUICK.",
(gptr*) &myisam_recover_options_str, (gptr*) &myisam_recover_options_str, 0,
GET_STR, OPT_ARG, 0, 0, 0, 0, 0, 0},
{"memlock", OPT_MEMLOCK, "Lock mysqld in memory.", (gptr*) &locked_in_memory,
(gptr*) &locked_in_memory, 0, GET_BOOL, NO_ARG, 0, 0, 0, 0, 0, 0},
{"master-ssl-key", OPT_MASTER_SSL_KEY,
"Master SSL keyfile name. Only applies if you have enabled master-ssl.",
(gptr*) &master_ssl_key, (gptr*) &master_ssl_key, 0, GET_STR, OPT_ARG,
0, 0, 0, 0, 0, 0},
{"master-user", OPT_MASTER_USER,
"The username the slave thread will use for authentication when connecting to the master. The user must have FILE privilege. If the master user is not set, user test is assumed. The value in master.info will take precedence if it can be read.",
(gptr*) &master_user, (gptr*) &master_user, 0, GET_STR, REQUIRED_ARG, 0, 0,
0, 0, 0, 0},
#ifdef HAVE_REPLICATION
{"disconnect-slave-event-count", OPT_DISCONNECT_SLAVE_EVENT_COUNT,
"Option used by mysql-test for debugging and testing of replication.",
(gptr*) &disconnect_slave_event_count,
(gptr*) &disconnect_slave_event_count, 0, GET_INT, REQUIRED_ARG, 0, 0, 0,
0, 0, 0},
{"abort-slave-event-count", OPT_ABORT_SLAVE_EVENT_COUNT,
"Option used by mysql-test for debugging and testing of replication.",
(gptr*) &abort_slave_event_count, (gptr*) &abort_slave_event_count,
0, GET_INT, REQUIRED_ARG, 0, 0, 0, 0, 0, 0},
{"max-binlog-dump-events", OPT_MAX_BINLOG_DUMP_EVENTS,
"Option used by mysql-test for debugging and testing of replication.",
(gptr*) &max_binlog_dump_events, (gptr*) &max_binlog_dump_events, 0,
GET_INT, REQUIRED_ARG, 0, 0, 0, 0, 0, 0},
{"sporadic-binlog-dump-fail", OPT_SPORADIC_BINLOG_DUMP_FAIL,
"Option used by mysql-test for debugging and testing of replication.",
(gptr*) &opt_sporadic_binlog_dump_fail,
(gptr*) &opt_sporadic_binlog_dump_fail, 0, GET_BOOL, NO_ARG, 0, 0, 0, 0, 0,
0},
#endif /* HAVE_REPLICATION */
{"safemalloc-mem-limit", OPT_SAFEMALLOC_MEM_LIMIT,
"Simulate memory shortage when compiled with the --with-debug=full option.",
0, 0, 0, GET_ULL, REQUIRED_ARG, 0, 0, 0, 0, 0, 0},
{"memlock", OPT_MEMLOCK, "Lock mysqld in memory.", (gptr*) &locked_in_memory,
(gptr*) &locked_in_memory, 0, GET_BOOL, NO_ARG, 0, 0, 0, 0, 0, 0},
{"myisam-recover", OPT_MYISAM_RECOVER,
"Syntax: myisam-recover[=option[,option...]], where option can be DEFAULT, BACKUP, FORCE or QUICK.",
(gptr*) &myisam_recover_options_str, (gptr*) &myisam_recover_options_str, 0,
GET_STR, OPT_ARG, 0, 0, 0, 0, 0, 0},
{"ndbcluster", OPT_NDBCLUSTER, "Enable NDB Cluster (if this version of MySQL supports it). \
Disable with --skip-ndbcluster (will save memory).",
(gptr*) &opt_ndbcluster, (gptr*) &opt_ndbcluster, 0, GET_BOOL, NO_ARG, 1, 0, 0,
0, 0, 0},
{"new", 'n', "Use very new possible 'unsafe' functions.",
(gptr*) &global_system_variables.new_mode,
(gptr*) &max_system_variables.new_mode,
......@@ -4331,32 +4323,43 @@ master-ssl",
{"pid-file", OPT_PID_FILE, "Pid file used by safe_mysqld.",
(gptr*) &pidfile_name_ptr, (gptr*) &pidfile_name_ptr, 0, GET_STR,
REQUIRED_ARG, 0, 0, 0, 0, 0, 0},
{"log-error", OPT_ERROR_LOG_FILE, "Log error file.",
(gptr*) &log_error_file_ptr, (gptr*) &log_error_file_ptr, 0, GET_STR,
OPT_ARG, 0, 0, 0, 0, 0, 0},
{"port", 'P', "Port number to use for connection.", (gptr*) &mysqld_port,
(gptr*) &mysqld_port, 0, GET_UINT, REQUIRED_ARG, 0, 0, 0, 0, 0, 0},
{"relay-log", OPT_RELAY_LOG,
"The location and name to use for relay logs.",
(gptr*) &opt_relay_logname, (gptr*) &opt_relay_logname, 0,
GET_STR_ALLOC, REQUIRED_ARG, 0, 0, 0, 0, 0, 0},
{"relay-log-index", OPT_RELAY_LOG_INDEX,
"The location and name to use for the file that keeps a list of the last \
relay logs.",
(gptr*) &opt_relaylog_index_name, (gptr*) &opt_relaylog_index_name, 0,
GET_STR, REQUIRED_ARG, 0, 0, 0, 0, 0, 0},
{"relay-log-info-file", OPT_RELAY_LOG_INFO_FILE,
"The location and name of the file that remembers where the SQL replication \
thread is in the relay logs.",
(gptr*) &relay_log_info_file, (gptr*) &relay_log_info_file, 0, GET_STR,
REQUIRED_ARG, 0, 0, 0, 0, 0, 0},
{"replicate-do-db", OPT_REPLICATE_DO_DB,
"Tells the slave thread to restrict replication to the specified database. To specify more than one database, use the directive multiple times, once for each database. Note that this will only work if you do not use cross-database queries such as UPDATE some_db.some_table SET foo='bar' while having selected a different or no database. If you need cross database updates to work, make sure you have 3.23.28 or later, and use replicate-wild-do-table=db_name.%.",
0, 0, 0, GET_STR, REQUIRED_ARG, 0, 0, 0, 0, 0, 0},
{"replicate-do-table", OPT_REPLICATE_DO_TABLE,
"Tells the slave thread to restrict replication to the specified table. To specify more than one table, use the directive multiple times, once for each table. This will work for cross-database updates, in contrast to replicate-do-db.",
0, 0, 0, GET_STR, REQUIRED_ARG, 0, 0, 0, 0, 0, 0},
{"replicate-wild-do-table", OPT_REPLICATE_WILD_DO_TABLE,
"Tells the slave thread to restrict replication to the tables that match the specified wildcard pattern. To specify more than one table, use the directive multiple times, once for each table. This will work for cross-database updates. Example: replicate-wild-do-table=foo%.bar% will replicate only updates to tables in all databases that start with foo and whose table names start with bar.",
0, 0, 0, GET_STR, REQUIRED_ARG, 0, 0, 0, 0, 0, 0},
{"replicate-ignore-db", OPT_REPLICATE_IGNORE_DB,
"Tells the slave thread to not replicate to the specified database. To specify more than one database to ignore, use the directive multiple times, once for each database. This option will not work if you use cross database updates. If you need cross database updates to work, make sure you have 3.23.28 or later, and use replicate-wild-ignore-table=db_name.%. ",
0, 0, 0, GET_STR, REQUIRED_ARG, 0, 0, 0, 0, 0, 0},
{"replicate-ignore-table", OPT_REPLICATE_IGNORE_TABLE,
"Tells the slave thread to not replicate to the specified table. To specify more than one table to ignore, use the directive multiple times, once for each table. This will work for cross-datbase updates, in contrast to replicate-ignore-db.",
0, 0, 0, GET_STR, REQUIRED_ARG, 0, 0, 0, 0, 0, 0},
{"replicate-wild-ignore-table", OPT_REPLICATE_WILD_IGNORE_TABLE,
"Tells the slave thread to not replicate to the tables that match the given wildcard pattern. To specify more than one table to ignore, use the directive multiple times, once for each table. This will work for cross-database updates. Example: replicate-wild-ignore-table=foo%.bar% will not do updates to tables in databases that start with foo and whose table names start with bar.",
0, 0, 0, GET_STR, REQUIRED_ARG, 0, 0, 0, 0, 0, 0},
{"replicate-rewrite-db", OPT_REPLICATE_REWRITE_DB,
"Updates to a database with a different name than the original. Example: replicate-rewrite-db=master_db_name->slave_db_name.",
0, 0, 0, GET_STR, REQUIRED_ARG, 0, 0, 0, 0, 0, 0},
{"replicate-wild-do-table", OPT_REPLICATE_WILD_DO_TABLE,
"Tells the slave thread to restrict replication to the tables that match the specified wildcard pattern. To specify more than one table, use the directive multiple times, once for each table. This will work for cross-database updates. Example: replicate-wild-do-table=foo%.bar% will replicate only updates to tables in all databases that start with foo and whose table names start with bar.",
0, 0, 0, GET_STR, REQUIRED_ARG, 0, 0, 0, 0, 0, 0},
{"replicate-wild-ignore-table", OPT_REPLICATE_WILD_IGNORE_TABLE,
"Tells the slave thread to not replicate to the tables that match the given wildcard pattern. To specify more than one table to ignore, use the directive multiple times, once for each table. This will work for cross-database updates. Example: replicate-wild-ignore-table=foo%.bar% will not do updates to tables in databases that start with foo and whose table names start with bar.",
0, 0, 0, GET_STR, REQUIRED_ARG, 0, 0, 0, 0, 0, 0},
#ifdef HAVE_REPLICATION
{"replicate-same-server-id", OPT_REPLICATE_SAME_SERVER_ID,
"In replication, if set to 1, do not skip events having our server id. \
......@@ -4371,8 +4374,6 @@ Can't be set to 1 if --log-slave-updates is used.",
"Hostname or IP of the slave to be reported to to the master during slave registration. Will appear in the output of SHOW SLAVE HOSTS. Leave unset if you do not want the slave to register itself with the master. Note that it is not sufficient for the master to simply read the IP of the slave off the socket once the slave connects. Due to NAT and other routing issues, that IP may not be valid for connecting to the slave from the master or other hosts.",
(gptr*) &report_host, (gptr*) &report_host, 0, GET_STR, REQUIRED_ARG, 0, 0,
0, 0, 0, 0},
{"report-user", OPT_REPORT_USER, "Undocumented.", (gptr*) &report_user,
(gptr*) &report_user, 0, GET_STR, REQUIRED_ARG, 0, 0, 0, 0, 0, 0},
{"report-password", OPT_REPORT_PASSWORD, "Undocumented.",
(gptr*) &report_password, (gptr*) &report_password, 0, GET_STR,
REQUIRED_ARG, 0, 0, 0, 0, 0, 0},
......@@ -4380,29 +4381,25 @@ Can't be set to 1 if --log-slave-updates is used.",
"Port for connecting to slave reported to the master during slave registration. Set it only if the slave is listening on a non-default port or if you have a special tunnel from the master or other clients to the slave. If not sure, leave this option unset.",
(gptr*) &report_port, (gptr*) &report_port, 0, GET_UINT, REQUIRED_ARG,
MYSQL_PORT, 0, 0, 0, 0, 0},
{"report-user", OPT_REPORT_USER, "Undocumented.", (gptr*) &report_user,
(gptr*) &report_user, 0, GET_STR, REQUIRED_ARG, 0, 0, 0, 0, 0, 0},
{"rpl-recovery-rank", OPT_RPL_RECOVERY_RANK, "Undocumented.",
(gptr*) &rpl_recovery_rank, (gptr*) &rpl_recovery_rank, 0, GET_ULONG,
REQUIRED_ARG, 0, 0, 0, 0, 0, 0},
{"relay-log", OPT_RELAY_LOG,
"The location and name to use for relay logs.",
(gptr*) &opt_relay_logname, (gptr*) &opt_relay_logname, 0,
GET_STR_ALLOC, REQUIRED_ARG, 0, 0, 0, 0, 0, 0},
{"relay-log-index", OPT_RELAY_LOG_INDEX,
"The location and name to use for the file that keeps a list of the last \
relay logs.",
(gptr*) &opt_relaylog_index_name, (gptr*) &opt_relaylog_index_name, 0,
GET_STR, REQUIRED_ARG, 0, 0, 0, 0, 0, 0},
{"safe-mode", OPT_SAFE, "Skip some optimize stages (for testing).",
0, 0, 0, GET_NO_ARG, NO_ARG, 0, 0, 0, 0, 0, 0},
#ifndef TO_BE_DELETED
{"safe-show-database", OPT_SAFE_SHOW_DB,
"Deprecated option; One should use GRANT SHOW DATABASES instead...",
"Deprecated option; use GRANT SHOW DATABASES instead...",
0, 0, 0, GET_NO_ARG, NO_ARG, 0, 0, 0, 0, 0, 0},
#endif
{"safe-user-create", OPT_SAFE_USER_CREATE,
"Don't allow new user creation by the user who has no write privileges to the mysql.user table.",
(gptr*) &opt_safe_user_create, (gptr*) &opt_safe_user_create, 0, GET_BOOL,
NO_ARG, 0, 0, 0, 0, 0, 0},
{"safemalloc-mem-limit", OPT_SAFEMALLOC_MEM_LIMIT,
"Simulate memory shortage when compiled with the --with-debug=full option.",
0, 0, 0, GET_ULL, REQUIRED_ARG, 0, 0, 0, 0, 0, 0},
{"secure-auth", OPT_SECURE_AUTH, "Disallow authentication for accounts that have old (pre-4.1) passwords.",
(gptr*) &opt_secure_auth, (gptr*) &opt_secure_auth, 0, GET_BOOL, NO_ARG,
my_bool(0), 0, 0, 0, 0, 0},
......@@ -4414,7 +4411,12 @@ relay logs.",
"Change the value of a variable. Please note that this option is deprecated;you can set variables directly with --variable-name=value.",
0, 0, 0, GET_STR, REQUIRED_ARG, 0, 0, 0, 0, 0, 0},
#ifdef HAVE_SMEM
{"shared_memory_base_name",OPT_SHARED_MEMORY_BASE_NAME,
{"shared-memory", OPT_ENABLE_SHARED_MEMORY,
"Enable the shared memory.",(gptr*) &opt_enable_shared_memory, (gptr*) &opt_enable_shared_memory,
0, GET_BOOL, NO_ARG, 0, 0, 0, 0, 0, 0},
#endif
#ifdef HAVE_SMEM
{"shared-memory-base-name",OPT_SHARED_MEMORY_BASE_NAME,
"Base name of shared memory.", (gptr*) &shared_memory_base_name, (gptr*) &shared_memory_base_name,
0, GET_STR, REQUIRED_ARG, 0, 0, 0, 0, 0, 0},
#endif
......@@ -4422,31 +4424,15 @@ relay logs.",
"Show user and password in SHOW SLAVE HOSTS on this master",
(gptr*) &opt_show_slave_auth_info, (gptr*) &opt_show_slave_auth_info, 0,
GET_BOOL, NO_ARG, 0, 0, 0, 0, 0, 0},
{"concurrent-insert", OPT_CONCURRENT_INSERT,
"Use concurrent insert with MyISAM. Disable with --skip-concurrent-insert.",
(gptr*) &myisam_concurrent_insert, (gptr*) &myisam_concurrent_insert,
0, GET_BOOL, NO_ARG, 1, 0, 0, 0, 0, 0},
{"skip-grant-tables", OPT_SKIP_GRANT,
"Start without grant tables. This gives all users FULL ACCESS to all tables!",
(gptr*) &opt_noacl, (gptr*) &opt_noacl, 0, GET_BOOL, NO_ARG, 0, 0, 0, 0, 0,
0},
{"innodb", OPT_INNODB, "Enable InnoDB (if this version of MySQL supports it). \
Disable with --skip-innodb (will save memory).",
(gptr*) &opt_innodb, (gptr*) &opt_innodb, 0, GET_BOOL, NO_ARG, 1, 0, 0,
0, 0, 0},
{"isam", OPT_ISAM, "Enable isam (if this version of MySQL supports it). \
Disable with --skip-isam.",
(gptr*) &opt_isam, (gptr*) &opt_isam, 0, GET_BOOL, NO_ARG, 1, 0, 0,
0, 0, 0},
{"ndbcluster", OPT_NDBCLUSTER, "Enable NDB Cluster (if this version of MySQL supports it). \
Disable with --skip-ndbcluster (will save memory).",
(gptr*) &opt_ndbcluster, (gptr*) &opt_ndbcluster, 0, GET_BOOL, NO_ARG, 1, 0, 0,
0, 0, 0},
{"skip-host-cache", OPT_SKIP_HOST_CACHE, "Don't cache host names.", 0, 0, 0,
GET_NO_ARG, NO_ARG, 0, 0, 0, 0, 0, 0},
{"skip-locking", OPT_SKIP_LOCK,
"Deprecated option, use --skip-external-locking instead.",
0, 0, 0, GET_NO_ARG, NO_ARG, 0, 0, 0, 0, 0, 0},
{"skip-host-cache", OPT_SKIP_HOST_CACHE, "Don't cache host names.", 0, 0, 0,
GET_NO_ARG, NO_ARG, 0, 0, 0, 0, 0, 0},
{"skip-name-resolve", OPT_SKIP_RESOLVE,
"Don't resolve hostnames. All hostnames are IP's or 'localhost'.",
0, 0, 0, GET_NO_ARG, NO_ARG, 0, 0, 0, 0, 0, 0},
......@@ -4455,6 +4441,13 @@ Disable with --skip-ndbcluster (will save memory).",
0, 0, 0},
{"skip-new", OPT_SKIP_NEW, "Don't use new, possible wrong routines.",
0, 0, 0, GET_NO_ARG, NO_ARG, 0, 0, 0, 0, 0, 0},
#ifndef DBUG_OFF
#ifdef SAFEMALLOC
{"skip-safemalloc", OPT_SKIP_SAFEMALLOC,
"Don't use the memory allocation checking.", 0, 0, 0, GET_NO_ARG, NO_ARG,
0, 0, 0, 0, 0, 0},
#endif
#endif
{"skip-show-database", OPT_SKIP_SHOW_DB,
"Don't allow 'SHOW DATABASE' commands.", 0, 0, 0, GET_NO_ARG, NO_ARG, 0, 0,
0, 0, 0, 0},
......@@ -4469,11 +4462,6 @@ Disable with --skip-ndbcluster (will save memory).",
{"skip-thread-priority", OPT_SKIP_PRIOR,
"Don't give threads different priorities.", 0, 0, 0, GET_NO_ARG, NO_ARG, 0,
0, 0, 0, 0, 0},
{"relay-log-info-file", OPT_RELAY_LOG_INFO_FILE,
"The location and name of the file that remembers where the SQL replication \
thread is in the relay logs.",
(gptr*) &relay_log_info_file, (gptr*) &relay_log_info_file, 0, GET_STR,
REQUIRED_ARG, 0, 0, 0, 0, 0, 0},
#ifdef HAVE_REPLICATION
{"slave-load-tmpdir", OPT_SLAVE_LOAD_TMPDIR,
"The location where the slave should put its temporary files when \
......@@ -4487,6 +4475,13 @@ replicating a LOAD DATA INFILE command.",
{"socket", OPT_SOCKET, "Socket file to use for connection.",
(gptr*) &mysqld_unix_port, (gptr*) &mysqld_unix_port, 0, GET_STR,
REQUIRED_ARG, 0, 0, 0, 0, 0, 0},
#ifdef HAVE_REPLICATION
{"sporadic-binlog-dump-fail", OPT_SPORADIC_BINLOG_DUMP_FAIL,
"Option used by mysql-test for debugging and testing of replication.",
(gptr*) &opt_sporadic_binlog_dump_fail,
(gptr*) &opt_sporadic_binlog_dump_fail, 0, GET_BOOL, NO_ARG, 0, 0, 0, 0, 0,
0},
#endif /* HAVE_REPLICATION */
{"sql-bin-update-same", OPT_SQL_BIN_UPDATE_SAME,
"If set, setting SQL_LOG_BIN to a value will automatically set SQL_LOG_UPDATE to the same value and vice versa.",
(gptr*) &opt_sql_bin_update, (gptr*) &opt_sql_bin_update, 0, GET_BOOL,
......@@ -4498,6 +4493,14 @@ replicating a LOAD DATA INFILE command.",
#ifdef HAVE_OPENSSL
#include "sslopt-longopts.h"
#endif
#ifdef __WIN__
{"standalone", OPT_STANDALONE,
"Dummy option to start as a standalone program (NT).", 0, 0, 0, GET_NO_ARG,
NO_ARG, 0, 0, 0, 0, 0, 0},
#endif
{"symbolic-links", 's', "Enable symbolic link support.",
(gptr*) &my_use_symdir, (gptr*) &my_use_symdir, 0, GET_BOOL, NO_ARG,
IF_PURIFY(0,1), 0, 0, 0, 0, 0},
{"temp-pool", OPT_TEMP_POOL,
"Using this option will cause most temporary files created to use a small set of names, rather than a unique name for each new file.",
(gptr*) &use_temp_pool, (gptr*) &use_temp_pool, 0, GET_BOOL, NO_ARG, 1,
......@@ -4515,24 +4518,17 @@ replicating a LOAD DATA INFILE command.",
{"transaction-isolation", OPT_TX_ISOLATION,
"Default transaction isolation level.", 0, 0, 0, GET_STR, REQUIRED_ARG, 0,
0, 0, 0, 0, 0},
{"external-locking", OPT_USE_LOCKING, "Use system (external) locking. With this option enabled you can run myisamchk to test (not repair) tables while the MySQL server is running.",
(gptr*) &opt_external_locking, (gptr*) &opt_external_locking,
0, GET_BOOL, NO_ARG, 0, 0, 0, 0, 0, 0},
{"use-symbolic-links", 's', "Enable symbolic link support. Deprecated option; Use --symbolic-links instead.",
(gptr*) &my_use_symdir, (gptr*) &my_use_symdir, 0, GET_BOOL, NO_ARG,
IF_PURIFY(0,1), 0, 0, 0, 0, 0},
{"symbolic-links", 's', "Enable symbolic link support.",
{"use-symbolic-links", 's', "Enable symbolic link support. Deprecated option; use --symbolic-links instead.",
(gptr*) &my_use_symdir, (gptr*) &my_use_symdir, 0, GET_BOOL, NO_ARG,
IF_PURIFY(0,1), 0, 0, 0, 0, 0},
{"user", 'u', "Run mysqld daemon as user.", 0, 0, 0, GET_STR, REQUIRED_ARG,
0, 0, 0, 0, 0, 0},
{"verbose", 'v', "Used with --help option for detailed help",
(gptr*) &opt_verbose, (gptr*) &opt_verbose, 0, GET_BOOL, NO_ARG, 0, 0, 0, 0,
0, 0},
{"version", 'V', "Output version information and exit.", 0, 0, 0, GET_NO_ARG,
NO_ARG, 0, 0, 0, 0, 0, 0},
{"log-warnings", 'W', "Log some not critical warnings to the log file. Use this option twice, or --log-warnings=2 if you want 'Aborted connections' warning to be logged in the error log file.",
(gptr*) &global_system_variables.log_warnings,
(gptr*) &max_system_variables.log_warnings, 0, GET_ULONG, OPT_ARG, 1, 0, 0,
0, 0, 0},
{"warnings", 'W', "Deprecated ; Use --log-warnings instead.",
{"warnings", 'W', "Deprecated; use --log-warnings instead.",
(gptr*) &global_system_variables.log_warnings,
(gptr*) &max_system_variables.log_warnings, 0, GET_ULONG, OPT_ARG, 1, 0, 0,
0, 0, 0},
......@@ -4608,6 +4604,11 @@ replicating a LOAD DATA INFILE command.",
"Use stopwords from this file instead of built-in list.",
(gptr*) &ft_stopword_file, (gptr*) &ft_stopword_file, 0, GET_STR,
REQUIRED_ARG, 0, 0, 0, 0, 0, 0},
{ "group_concat_max_len", OPT_GROUP_CONCAT_MAX_LEN,
"The maximum length of the result of function group_concat.",
(gptr*) &global_system_variables.group_concat_max_len,
(gptr*) &max_system_variables.group_concat_max_len, 0, GET_ULONG,
REQUIRED_ARG, 1024, 4, (long) ~0, 0, 1, 0},
#ifdef HAVE_INNOBASE_DB
{"innodb_mirrored_log_groups", OPT_INNODB_MIRRORED_LOG_GROUPS,
"Number of identical copies of log groups we keep for the database. Currently this should be set to 1.",
......@@ -4967,12 +4968,21 @@ The minimum value for this variable is 4096.",
(gptr*) &max_system_variables.sortbuff_size, 0, GET_ULONG, REQUIRED_ARG,
MAX_SORT_MEMORY, MIN_SORT_MEMORY+MALLOC_OVERHEAD*2, ~0L, MALLOC_OVERHEAD,
1, 0},
#ifdef HAVE_BERKELEY_DB
{"sync-bdb-logs", OPT_BDB_SYNC,
"Synchronously flush logs. Enabled by default",
(gptr*) &opt_sync_bdb_logs, (gptr*) &opt_sync_bdb_logs, 0, GET_BOOL,
NO_ARG, 1, 0, 0, 0, 0, 0},
#endif /* HAVE_BERKELEY_DB */
{"sync-binlog", OPT_SYNC_BINLOG,
"Sync the binlog to disk after every #th event. \
#=0 (the default) does no sync. Syncing slows MySQL down",
(gptr*) &sync_binlog_period,
(gptr*) &sync_binlog_period, 0, GET_ULONG, REQUIRED_ARG, 0, 0, ~0L, 0, 1,
0},
{"sync-frm", OPT_SYNC_FRM, "Sync .frm to disk on create. Enabled by default",
(gptr*) &opt_sync_frm, (gptr*) &opt_sync_frm, 0, GET_BOOL, NO_ARG, 1, 0,
0, 0, 0, 0},
{"table_cache", OPT_TABLE_CACHE,
"The number of open tables for all threads.", (gptr*) &table_cache_size,
(gptr*) &table_cache_size, 0, GET_ULONG, REQUIRED_ARG, 64, 1, 512*1024L,
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7