Skip to content

C
C-Astral dialect C library
Commit 2ac294ac authored by PX4BuildBot's avatar PX4BuildBot
Browse files
Options

autogenerated headers for rev... 

autogenerated headers for rev https://github.com/mavlink/mavlink/tree/c5796d16915b0f9125060b0b3c88c79217b8c328
parent 089833dc
Hide whitespace changes
Inline Side-by-side
Showing with 54 additions and 37 deletions
ASLUAV/ASLUAV.h
View file @ 2ac294ac
......@@ -123,7 +123,7 @@ typedef enum MAV_CMD
MAV_CMD_GET_MESSAGE_INTERVAL=510, /* Request the interval between messages for a particular MAVLink message ID. The receiver should ACK the command and then emit its response in a MESSAGE_INTERVAL message. |The MAVLink message ID| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| */
MAV_CMD_SET_MESSAGE_INTERVAL=511, /* Set the interval between messages for a particular MAVLink message ID. This interface replaces REQUEST_DATA_STREAM. |The MAVLink message ID| The interval between two messages. Set to -1 to disable and 0 to request default rate.| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Target address of message stream (if message has target address fields). 0: Flight-stack default (recommended), 1: address of requestor, 2: broadcast.| */
MAV_CMD_REQUEST_MESSAGE=512, /* Request the target system(s) emit a single instance of a specified message (i.e. a "one-shot" version of MAV_CMD_SET_MESSAGE_INTERVAL). |The MAVLink message ID of the requested message.| Index id (if appropriate). The use of this parameter (if any), must be defined in the requested message.| The use of this parameter (if any), must be defined in the requested message. By default assumed not used (0).| The use of this parameter (if any), must be defined in the requested message. By default assumed not used (0).| The use of this parameter (if any), must be defined in the requested message. By default assumed not used (0).| The use of this parameter (if any), must be defined in the requested message. By default assumed not used (0).| Target address for requested message (if message has target address fields). 0: Flight-stack default, 1: address of requestor, 2: broadcast.| */
MAV_CMD_REQUEST_PROTOCOL_VERSION=519, /* Request MAVLink protocol version compatibility |1: Request supported protocol versions by all nodes on the network| Reserved (all remaining params)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| */
MAV_CMD_REQUEST_PROTOCOL_VERSION=519, /* Request MAVLink protocol version compatibility. All receivers should ACK the command and then emit their capabilities in an PROTOCOL_VERSION message |1: Request supported protocol versions by all nodes on the network| Reserved (all remaining params)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| */
MAV_CMD_REQUEST_AUTOPILOT_CAPABILITIES=520, /* Request autopilot capabilities. The receiver should ACK the command and then emit its capabilities in an AUTOPILOT_VERSION message |1: Request autopilot version| Reserved (all remaining params)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| */
MAV_CMD_REQUEST_CAMERA_INFORMATION=521, /* Request camera information (CAMERA_INFORMATION). |0: No action 1: Request camera capabilities| Reserved (all remaining params)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| */
MAV_CMD_REQUEST_CAMERA_SETTINGS=522, /* Request camera settings (CAMERA_SETTINGS). |0: No Action 1: Request camera settings| Reserved (all remaining params)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| */
......@@ -142,7 +142,7 @@ typedef enum MAV_CMD
MAV_CMD_DO_GIMBAL_MANAGER_TRACK_RECTANGLE=1002, /* If the gimbal supports visual tracking (GIMBAL_MANAGER_CAP_FLAGS_HAS_TRACKING_RECTANGLE is set), this command allows to initiate the tracking. Such a tracking gimbal manager would usually be an integrated camera/gimbal, or alternatively a companion computer connected to a camera. |Top left corner of rectangle x value (normalized 0..1, 0 is left, 1 is right).| Top left corner of rectangle y value (normalized 0..1, 0 is top, 1 is bottom).| Bottom right corner of rectangle x value (normalized 0..1, 0 is left, 1 is right).| Bottom right corner of rectangle y value (normalized 0..1, 0 is top, 1 is bottom).| Reserved (default:0)| Reserved (default:0)| Component ID of gimbal device to address (or 1-6 for non-MAVLink gimbal), 0 for all gimbal device components. (Send command multiple times for more than one but not all gimbals.)| */
MAV_CMD_IMAGE_START_CAPTURE=2000, /* Start image capture sequence. Sends CAMERA_IMAGE_CAPTURED after each capture. Use NaN for reserved values. |Reserved (Set to 0)| Desired elapsed time between two consecutive pictures (in seconds). Minimum values depend on hardware (typically greater than 2 seconds).| Total number of images to capture. 0 to capture forever/until MAV_CMD_IMAGE_STOP_CAPTURE.| Capture sequence number starting from 1. This is only valid for single-capture (param3 == 1). Increment the capture ID for each capture command to prevent double captures when a command is re-transmitted. Use 0 to ignore it.| Reserved (all remaining params)| Reserved (default:0)| Reserved (default:0)| */
MAV_CMD_IMAGE_STOP_CAPTURE=2001, /* Stop image capture sequence Use NaN for reserved values. |Reserved (Set to 0)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:0)| Reserved (default:0)| Reserved (default:NaN)| */
MAV_CMD_REQUEST_CAMERA_IMAGE_CAPTURE=2002, /* Re-request a CAMERA_IMAGE_CAPTURE message. |Sequence number for missing CAMERA_IMAGE_CAPTURE message| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:0)| Reserved (default:0)| Reserved (default:NaN)| */
MAV_CMD_REQUEST_CAMERA_IMAGE_CAPTURE=2002, /* Re-request a CAMERA_IMAGE_CAPTURED message. |Sequence number for missing CAMERA_IMAGE_CAPTURED message| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:0)| Reserved (default:0)| Reserved (default:NaN)| */
MAV_CMD_DO_TRIGGER_CONTROL=2003, /* Enable or disable on-board camera triggering system. |Trigger enable/disable (0 for disable, 1 for start), -1 to ignore| 1 to reset the trigger sequence, -1 or 0 to ignore| 1 to pause triggering, but without switching the camera off or retracting it. -1 to ignore| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| */
MAV_CMD_VIDEO_START_CAPTURE=2500, /* Starts video capture (recording). |Video Stream ID (0 for all streams)| Frequency CAMERA_CAPTURE_STATUS messages should be sent while recording (0 for no messages, otherwise frequency)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)| */
MAV_CMD_VIDEO_STOP_CAPTURE=2501, /* Stop the current video capture (recording). |Video Stream ID (0 for all streams)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)| */
......
ASLUAV/version.h
View file @ 2ac294ac
......@@ -7,7 +7,7 @@
#ifndef MAVLINK_VERSION_H
#define MAVLINK_VERSION_H
#define MAVLINK_BUILD_DATE "Sat Apr 25 2020"
#define MAVLINK_BUILD_DATE "Mon Apr 27 2020"
#define MAVLINK_WIRE_PROTOCOL_VERSION "2.0"
#define MAVLINK_MAX_DIALECT_PAYLOAD_SIZE 255
......
ardupilotmega/ardupilotmega.h
View file @ 2ac294ac
......@@ -144,7 +144,7 @@ typedef enum MAV_CMD
MAV_CMD_GET_MESSAGE_INTERVAL=510, /* Request the interval between messages for a particular MAVLink message ID. The receiver should ACK the command and then emit its response in a MESSAGE_INTERVAL message. |The MAVLink message ID| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| */
MAV_CMD_SET_MESSAGE_INTERVAL=511, /* Set the interval between messages for a particular MAVLink message ID. This interface replaces REQUEST_DATA_STREAM. |The MAVLink message ID| The interval between two messages. Set to -1 to disable and 0 to request default rate.| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Target address of message stream (if message has target address fields). 0: Flight-stack default (recommended), 1: address of requestor, 2: broadcast.| */
MAV_CMD_REQUEST_MESSAGE=512, /* Request the target system(s) emit a single instance of a specified message (i.e. a "one-shot" version of MAV_CMD_SET_MESSAGE_INTERVAL). |The MAVLink message ID of the requested message.| Index id (if appropriate). The use of this parameter (if any), must be defined in the requested message.| The use of this parameter (if any), must be defined in the requested message. By default assumed not used (0).| The use of this parameter (if any), must be defined in the requested message. By default assumed not used (0).| The use of this parameter (if any), must be defined in the requested message. By default assumed not used (0).| The use of this parameter (if any), must be defined in the requested message. By default assumed not used (0).| Target address for requested message (if message has target address fields). 0: Flight-stack default, 1: address of requestor, 2: broadcast.| */
MAV_CMD_REQUEST_PROTOCOL_VERSION=519, /* Request MAVLink protocol version compatibility |1: Request supported protocol versions by all nodes on the network| Reserved (all remaining params)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| */
MAV_CMD_REQUEST_PROTOCOL_VERSION=519, /* Request MAVLink protocol version compatibility. All receivers should ACK the command and then emit their capabilities in an PROTOCOL_VERSION message |1: Request supported protocol versions by all nodes on the network| Reserved (all remaining params)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| */
MAV_CMD_REQUEST_AUTOPILOT_CAPABILITIES=520, /* Request autopilot capabilities. The receiver should ACK the command and then emit its capabilities in an AUTOPILOT_VERSION message |1: Request autopilot version| Reserved (all remaining params)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| */
MAV_CMD_REQUEST_CAMERA_INFORMATION=521, /* Request camera information (CAMERA_INFORMATION). |0: No action 1: Request camera capabilities| Reserved (all remaining params)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| */
MAV_CMD_REQUEST_CAMERA_SETTINGS=522, /* Request camera settings (CAMERA_SETTINGS). |0: No Action 1: Request camera settings| Reserved (all remaining params)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| */
......@@ -163,7 +163,7 @@ typedef enum MAV_CMD
MAV_CMD_DO_GIMBAL_MANAGER_TRACK_RECTANGLE=1002, /* If the gimbal supports visual tracking (GIMBAL_MANAGER_CAP_FLAGS_HAS_TRACKING_RECTANGLE is set), this command allows to initiate the tracking. Such a tracking gimbal manager would usually be an integrated camera/gimbal, or alternatively a companion computer connected to a camera. |Top left corner of rectangle x value (normalized 0..1, 0 is left, 1 is right).| Top left corner of rectangle y value (normalized 0..1, 0 is top, 1 is bottom).| Bottom right corner of rectangle x value (normalized 0..1, 0 is left, 1 is right).| Bottom right corner of rectangle y value (normalized 0..1, 0 is top, 1 is bottom).| Reserved (default:0)| Reserved (default:0)| Component ID of gimbal device to address (or 1-6 for non-MAVLink gimbal), 0 for all gimbal device components. (Send command multiple times for more than one but not all gimbals.)| */
MAV_CMD_IMAGE_START_CAPTURE=2000, /* Start image capture sequence. Sends CAMERA_IMAGE_CAPTURED after each capture. Use NaN for reserved values. |Reserved (Set to 0)| Desired elapsed time between two consecutive pictures (in seconds). Minimum values depend on hardware (typically greater than 2 seconds).| Total number of images to capture. 0 to capture forever/until MAV_CMD_IMAGE_STOP_CAPTURE.| Capture sequence number starting from 1. This is only valid for single-capture (param3 == 1). Increment the capture ID for each capture command to prevent double captures when a command is re-transmitted. Use 0 to ignore it.| Reserved (all remaining params)| Reserved (default:0)| Reserved (default:0)| */
MAV_CMD_IMAGE_STOP_CAPTURE=2001, /* Stop image capture sequence Use NaN for reserved values. |Reserved (Set to 0)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:0)| Reserved (default:0)| Reserved (default:NaN)| */
MAV_CMD_REQUEST_CAMERA_IMAGE_CAPTURE=2002, /* Re-request a CAMERA_IMAGE_CAPTURE message. |Sequence number for missing CAMERA_IMAGE_CAPTURE message| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:0)| Reserved (default:0)| Reserved (default:NaN)| */
MAV_CMD_REQUEST_CAMERA_IMAGE_CAPTURE=2002, /* Re-request a CAMERA_IMAGE_CAPTURED message. |Sequence number for missing CAMERA_IMAGE_CAPTURED message| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:0)| Reserved (default:0)| Reserved (default:NaN)| */
MAV_CMD_DO_TRIGGER_CONTROL=2003, /* Enable or disable on-board camera triggering system. |Trigger enable/disable (0 for disable, 1 for start), -1 to ignore| 1 to reset the trigger sequence, -1 or 0 to ignore| 1 to pause triggering, but without switching the camera off or retracting it. -1 to ignore| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| */
MAV_CMD_VIDEO_START_CAPTURE=2500, /* Starts video capture (recording). |Video Stream ID (0 for all streams)| Frequency CAMERA_CAPTURE_STATUS messages should be sent while recording (0 for no messages, otherwise frequency)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)| */
MAV_CMD_VIDEO_STOP_CAPTURE=2501, /* Stop the current video capture (recording). |Video Stream ID (0 for all streams)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)| */
......
ardupilotmega/version.h
View file @ 2ac294ac
......@@ -7,7 +7,7 @@
#ifndef MAVLINK_VERSION_H
#define MAVLINK_VERSION_H
#define MAVLINK_BUILD_DATE "Sat Apr 25 2020"
#define MAVLINK_BUILD_DATE "Mon Apr 27 2020"
#define MAVLINK_WIRE_PROTOCOL_VERSION "2.0"
#define MAVLINK_MAX_DIALECT_PAYLOAD_SIZE 255
......
autoquad/autoquad.h
View file @ 2ac294ac
......@@ -167,7 +167,7 @@ typedef enum MAV_CMD
MAV_CMD_GET_MESSAGE_INTERVAL=510, /* Request the interval between messages for a particular MAVLink message ID. The receiver should ACK the command and then emit its response in a MESSAGE_INTERVAL message. |The MAVLink message ID| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| */
MAV_CMD_SET_MESSAGE_INTERVAL=511, /* Set the interval between messages for a particular MAVLink message ID. This interface replaces REQUEST_DATA_STREAM. |The MAVLink message ID| The interval between two messages. Set to -1 to disable and 0 to request default rate.| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Target address of message stream (if message has target address fields). 0: Flight-stack default (recommended), 1: address of requestor, 2: broadcast.| */
MAV_CMD_REQUEST_MESSAGE=512, /* Request the target system(s) emit a single instance of a specified message (i.e. a "one-shot" version of MAV_CMD_SET_MESSAGE_INTERVAL). |The MAVLink message ID of the requested message.| Index id (if appropriate). The use of this parameter (if any), must be defined in the requested message.| The use of this parameter (if any), must be defined in the requested message. By default assumed not used (0).| The use of this parameter (if any), must be defined in the requested message. By default assumed not used (0).| The use of this parameter (if any), must be defined in the requested message. By default assumed not used (0).| The use of this parameter (if any), must be defined in the requested message. By default assumed not used (0).| Target address for requested message (if message has target address fields). 0: Flight-stack default, 1: address of requestor, 2: broadcast.| */
MAV_CMD_REQUEST_PROTOCOL_VERSION=519, /* Request MAVLink protocol version compatibility |1: Request supported protocol versions by all nodes on the network| Reserved (all remaining params)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| */
MAV_CMD_REQUEST_PROTOCOL_VERSION=519, /* Request MAVLink protocol version compatibility. All receivers should ACK the command and then emit their capabilities in an PROTOCOL_VERSION message |1: Request supported protocol versions by all nodes on the network| Reserved (all remaining params)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| */
MAV_CMD_REQUEST_AUTOPILOT_CAPABILITIES=520, /* Request autopilot capabilities. The receiver should ACK the command and then emit its capabilities in an AUTOPILOT_VERSION message |1: Request autopilot version| Reserved (all remaining params)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| */
MAV_CMD_REQUEST_CAMERA_INFORMATION=521, /* Request camera information (CAMERA_INFORMATION). |0: No action 1: Request camera capabilities| Reserved (all remaining params)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| */
MAV_CMD_REQUEST_CAMERA_SETTINGS=522, /* Request camera settings (CAMERA_SETTINGS). |0: No Action 1: Request camera settings| Reserved (all remaining params)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| */
......@@ -186,7 +186,7 @@ typedef enum MAV_CMD
MAV_CMD_DO_GIMBAL_MANAGER_TRACK_RECTANGLE=1002, /* If the gimbal supports visual tracking (GIMBAL_MANAGER_CAP_FLAGS_HAS_TRACKING_RECTANGLE is set), this command allows to initiate the tracking. Such a tracking gimbal manager would usually be an integrated camera/gimbal, or alternatively a companion computer connected to a camera. |Top left corner of rectangle x value (normalized 0..1, 0 is left, 1 is right).| Top left corner of rectangle y value (normalized 0..1, 0 is top, 1 is bottom).| Bottom right corner of rectangle x value (normalized 0..1, 0 is left, 1 is right).| Bottom right corner of rectangle y value (normalized 0..1, 0 is top, 1 is bottom).| Reserved (default:0)| Reserved (default:0)| Component ID of gimbal device to address (or 1-6 for non-MAVLink gimbal), 0 for all gimbal device components. (Send command multiple times for more than one but not all gimbals.)| */
MAV_CMD_IMAGE_START_CAPTURE=2000, /* Start image capture sequence. Sends CAMERA_IMAGE_CAPTURED after each capture. Use NaN for reserved values. |Reserved (Set to 0)| Desired elapsed time between two consecutive pictures (in seconds). Minimum values depend on hardware (typically greater than 2 seconds).| Total number of images to capture. 0 to capture forever/until MAV_CMD_IMAGE_STOP_CAPTURE.| Capture sequence number starting from 1. This is only valid for single-capture (param3 == 1). Increment the capture ID for each capture command to prevent double captures when a command is re-transmitted. Use 0 to ignore it.| Reserved (all remaining params)| Reserved (default:0)| Reserved (default:0)| */
MAV_CMD_IMAGE_STOP_CAPTURE=2001, /* Stop image capture sequence Use NaN for reserved values. |Reserved (Set to 0)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:0)| Reserved (default:0)| Reserved (default:NaN)| */
MAV_CMD_REQUEST_CAMERA_IMAGE_CAPTURE=2002, /* Re-request a CAMERA_IMAGE_CAPTURE message. |Sequence number for missing CAMERA_IMAGE_CAPTURE message| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:0)| Reserved (default:0)| Reserved (default:NaN)| */
MAV_CMD_REQUEST_CAMERA_IMAGE_CAPTURE=2002, /* Re-request a CAMERA_IMAGE_CAPTURED message. |Sequence number for missing CAMERA_IMAGE_CAPTURED message| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:0)| Reserved (default:0)| Reserved (default:NaN)| */
MAV_CMD_DO_TRIGGER_CONTROL=2003, /* Enable or disable on-board camera triggering system. |Trigger enable/disable (0 for disable, 1 for start), -1 to ignore| 1 to reset the trigger sequence, -1 or 0 to ignore| 1 to pause triggering, but without switching the camera off or retracting it. -1 to ignore| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| */
MAV_CMD_VIDEO_START_CAPTURE=2500, /* Starts video capture (recording). |Video Stream ID (0 for all streams)| Frequency CAMERA_CAPTURE_STATUS messages should be sent while recording (0 for no messages, otherwise frequency)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)| */
MAV_CMD_VIDEO_STOP_CAPTURE=2501, /* Stop the current video capture (recording). |Video Stream ID (0 for all streams)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)| */
......
autoquad/version.h
View file @ 2ac294ac
......@@ -7,7 +7,7 @@
#ifndef MAVLINK_VERSION_H
#define MAVLINK_VERSION_H
#define MAVLINK_BUILD_DATE "Sat Apr 25 2020"
#define MAVLINK_BUILD_DATE "Mon Apr 27 2020"
#define MAVLINK_WIRE_PROTOCOL_VERSION "2.0"
#define MAVLINK_MAX_DIALECT_PAYLOAD_SIZE 255
......
common/common.h
View file @ 2ac294ac
......@@ -743,7 +743,7 @@ typedef enum MAV_CMD
MAV_CMD_GET_MESSAGE_INTERVAL=510, /* Request the interval between messages for a particular MAVLink message ID. The receiver should ACK the command and then emit its response in a MESSAGE_INTERVAL message. |The MAVLink message ID| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| */
MAV_CMD_SET_MESSAGE_INTERVAL=511, /* Set the interval between messages for a particular MAVLink message ID. This interface replaces REQUEST_DATA_STREAM. |The MAVLink message ID| The interval between two messages. Set to -1 to disable and 0 to request default rate.| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Target address of message stream (if message has target address fields). 0: Flight-stack default (recommended), 1: address of requestor, 2: broadcast.| */
MAV_CMD_REQUEST_MESSAGE=512, /* Request the target system(s) emit a single instance of a specified message (i.e. a "one-shot" version of MAV_CMD_SET_MESSAGE_INTERVAL). |The MAVLink message ID of the requested message.| Index id (if appropriate). The use of this parameter (if any), must be defined in the requested message.| The use of this parameter (if any), must be defined in the requested message. By default assumed not used (0).| The use of this parameter (if any), must be defined in the requested message. By default assumed not used (0).| The use of this parameter (if any), must be defined in the requested message. By default assumed not used (0).| The use of this parameter (if any), must be defined in the requested message. By default assumed not used (0).| Target address for requested message (if message has target address fields). 0: Flight-stack default, 1: address of requestor, 2: broadcast.| */
MAV_CMD_REQUEST_PROTOCOL_VERSION=519, /* Request MAVLink protocol version compatibility |1: Request supported protocol versions by all nodes on the network| Reserved (all remaining params)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| */
MAV_CMD_REQUEST_PROTOCOL_VERSION=519, /* Request MAVLink protocol version compatibility. All receivers should ACK the command and then emit their capabilities in an PROTOCOL_VERSION message |1: Request supported protocol versions by all nodes on the network| Reserved (all remaining params)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| */
MAV_CMD_REQUEST_AUTOPILOT_CAPABILITIES=520, /* Request autopilot capabilities. The receiver should ACK the command and then emit its capabilities in an AUTOPILOT_VERSION message |1: Request autopilot version| Reserved (all remaining params)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| */
MAV_CMD_REQUEST_CAMERA_INFORMATION=521, /* Request camera information (CAMERA_INFORMATION). |0: No action 1: Request camera capabilities| Reserved (all remaining params)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| */
MAV_CMD_REQUEST_CAMERA_SETTINGS=522, /* Request camera settings (CAMERA_SETTINGS). |0: No Action 1: Request camera settings| Reserved (all remaining params)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| */
......@@ -762,7 +762,7 @@ typedef enum MAV_CMD
MAV_CMD_DO_GIMBAL_MANAGER_TRACK_RECTANGLE=1002, /* If the gimbal supports visual tracking (GIMBAL_MANAGER_CAP_FLAGS_HAS_TRACKING_RECTANGLE is set), this command allows to initiate the tracking. Such a tracking gimbal manager would usually be an integrated camera/gimbal, or alternatively a companion computer connected to a camera. |Top left corner of rectangle x value (normalized 0..1, 0 is left, 1 is right).| Top left corner of rectangle y value (normalized 0..1, 0 is top, 1 is bottom).| Bottom right corner of rectangle x value (normalized 0..1, 0 is left, 1 is right).| Bottom right corner of rectangle y value (normalized 0..1, 0 is top, 1 is bottom).| Reserved (default:0)| Reserved (default:0)| Component ID of gimbal device to address (or 1-6 for non-MAVLink gimbal), 0 for all gimbal device components. (Send command multiple times for more than one but not all gimbals.)| */
MAV_CMD_IMAGE_START_CAPTURE=2000, /* Start image capture sequence. Sends CAMERA_IMAGE_CAPTURED after each capture. Use NaN for reserved values. |Reserved (Set to 0)| Desired elapsed time between two consecutive pictures (in seconds). Minimum values depend on hardware (typically greater than 2 seconds).| Total number of images to capture. 0 to capture forever/until MAV_CMD_IMAGE_STOP_CAPTURE.| Capture sequence number starting from 1. This is only valid for single-capture (param3 == 1). Increment the capture ID for each capture command to prevent double captures when a command is re-transmitted. Use 0 to ignore it.| Reserved (all remaining params)| Reserved (default:0)| Reserved (default:0)| */
MAV_CMD_IMAGE_STOP_CAPTURE=2001, /* Stop image capture sequence Use NaN for reserved values. |Reserved (Set to 0)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:0)| Reserved (default:0)| Reserved (default:NaN)| */
MAV_CMD_REQUEST_CAMERA_IMAGE_CAPTURE=2002, /* Re-request a CAMERA_IMAGE_CAPTURE message. |Sequence number for missing CAMERA_IMAGE_CAPTURE message| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:0)| Reserved (default:0)| Reserved (default:NaN)| */
MAV_CMD_REQUEST_CAMERA_IMAGE_CAPTURE=2002, /* Re-request a CAMERA_IMAGE_CAPTURED message. |Sequence number for missing CAMERA_IMAGE_CAPTURED message| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:0)| Reserved (default:0)| Reserved (default:NaN)| */
MAV_CMD_DO_TRIGGER_CONTROL=2003, /* Enable or disable on-board camera triggering system. |Trigger enable/disable (0 for disable, 1 for start), -1 to ignore| 1 to reset the trigger sequence, -1 or 0 to ignore| 1 to pause triggering, but without switching the camera off or retracting it. -1 to ignore| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| */
MAV_CMD_VIDEO_START_CAPTURE=2500, /* Starts video capture (recording). |Video Stream ID (0 for all streams)| Frequency CAMERA_CAPTURE_STATUS messages should be sent while recording (0 for no messages, otherwise frequency)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)| */
MAV_CMD_VIDEO_STOP_CAPTURE=2501, /* Stop the current video capture (recording). |Video Stream ID (0 for all streams)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)| */
......@@ -1472,7 +1472,7 @@ typedef enum CAMERA_CAP_FLAGS
CAMERA_CAP_FLAGS_HAS_IMAGE_SURVEY_MODE=32, /* Camera has image survey mode (MAV_CMD_SET_CAMERA_MODE) | */
CAMERA_CAP_FLAGS_HAS_BASIC_ZOOM=64, /* Camera has basic zoom control (MAV_CMD_SET_CAMERA_ZOOM) | */
CAMERA_CAP_FLAGS_HAS_BASIC_FOCUS=128, /* Camera has basic focus control (MAV_CMD_SET_CAMERA_FOCUS) | */
CAMERA_CAP_FLAGS_HAS_VIDEO_STREAM=256, /* Camera has video streaming capabilities (use MAV_CMD_REQUEST_VIDEO_STREAM_INFORMATION for video streaming info) | */
CAMERA_CAP_FLAGS_HAS_VIDEO_STREAM=256, /* Camera has video streaming capabilities (request VIDEO_STREAM_INFORMATION with MAV_CMD_REQUEST_MESSAGE for video streaming info) | */
CAMERA_CAP_FLAGS_ENUM_END=257, /* | */
} CAMERA_CAP_FLAGS;
#endif
......
common/version.h
View file @ 2ac294ac
......@@ -7,7 +7,7 @@
#ifndef MAVLINK_VERSION_H
#define MAVLINK_VERSION_H
#define MAVLINK_BUILD_DATE "Sat Apr 25 2020"
#define MAVLINK_BUILD_DATE "Mon Apr 27 2020"
#define MAVLINK_WIRE_PROTOCOL_VERSION "2.0"
#define MAVLINK_MAX_DIALECT_PAYLOAD_SIZE 255
......
icarous/version.h
View file @ 2ac294ac
......@@ -7,7 +7,7 @@
#ifndef MAVLINK_VERSION_H
#define MAVLINK_VERSION_H
#define MAVLINK_BUILD_DATE "Sat Apr 25 2020"
#define MAVLINK_BUILD_DATE "Mon Apr 27 2020"
#define MAVLINK_WIRE_PROTOCOL_VERSION "2.0"
#define MAVLINK_MAX_DIALECT_PAYLOAD_SIZE 255
......
matrixpilot/matrixpilot.h
View file @ 2ac294ac
......@@ -140,7 +140,7 @@ typedef enum MAV_CMD
MAV_CMD_GET_MESSAGE_INTERVAL=510, /* Request the interval between messages for a particular MAVLink message ID. The receiver should ACK the command and then emit its response in a MESSAGE_INTERVAL message. |The MAVLink message ID| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| */
MAV_CMD_SET_MESSAGE_INTERVAL=511, /* Set the interval between messages for a particular MAVLink message ID. This interface replaces REQUEST_DATA_STREAM. |The MAVLink message ID| The interval between two messages. Set to -1 to disable and 0 to request default rate.| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Target address of message stream (if message has target address fields). 0: Flight-stack default (recommended), 1: address of requestor, 2: broadcast.| */
MAV_CMD_REQUEST_MESSAGE=512, /* Request the target system(s) emit a single instance of a specified message (i.e. a "one-shot" version of MAV_CMD_SET_MESSAGE_INTERVAL). |The MAVLink message ID of the requested message.| Index id (if appropriate). The use of this parameter (if any), must be defined in the requested message.| The use of this parameter (if any), must be defined in the requested message. By default assumed not used (0).| The use of this parameter (if any), must be defined in the requested message. By default assumed not used (0).| The use of this parameter (if any), must be defined in the requested message. By default assumed not used (0).| The use of this parameter (if any), must be defined in the requested message. By default assumed not used (0).| Target address for requested message (if message has target address fields). 0: Flight-stack default, 1: address of requestor, 2: broadcast.| */
MAV_CMD_REQUEST_PROTOCOL_VERSION=519, /* Request MAVLink protocol version compatibility |1: Request supported protocol versions by all nodes on the network| Reserved (all remaining params)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| */
MAV_CMD_REQUEST_PROTOCOL_VERSION=519, /* Request MAVLink protocol version compatibility. All receivers should ACK the command and then emit their capabilities in an PROTOCOL_VERSION message |1: Request supported protocol versions by all nodes on the network| Reserved (all remaining params)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| */
MAV_CMD_REQUEST_AUTOPILOT_CAPABILITIES=520, /* Request autopilot capabilities. The receiver should ACK the command and then emit its capabilities in an AUTOPILOT_VERSION message |1: Request autopilot version| Reserved (all remaining params)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| */
MAV_CMD_REQUEST_CAMERA_INFORMATION=521, /* Request camera information (CAMERA_INFORMATION). |0: No action 1: Request camera capabilities| Reserved (all remaining params)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| */
MAV_CMD_REQUEST_CAMERA_SETTINGS=522, /* Request camera settings (CAMERA_SETTINGS). |0: No Action 1: Request camera settings| Reserved (all remaining params)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| */
......@@ -159,7 +159,7 @@ typedef enum MAV_CMD
MAV_CMD_DO_GIMBAL_MANAGER_TRACK_RECTANGLE=1002, /* If the gimbal supports visual tracking (GIMBAL_MANAGER_CAP_FLAGS_HAS_TRACKING_RECTANGLE is set), this command allows to initiate the tracking. Such a tracking gimbal manager would usually be an integrated camera/gimbal, or alternatively a companion computer connected to a camera. |Top left corner of rectangle x value (normalized 0..1, 0 is left, 1 is right).| Top left corner of rectangle y value (normalized 0..1, 0 is top, 1 is bottom).| Bottom right corner of rectangle x value (normalized 0..1, 0 is left, 1 is right).| Bottom right corner of rectangle y value (normalized 0..1, 0 is top, 1 is bottom).| Reserved (default:0)| Reserved (default:0)| Component ID of gimbal device to address (or 1-6 for non-MAVLink gimbal), 0 for all gimbal device components. (Send command multiple times for more than one but not all gimbals.)| */
MAV_CMD_IMAGE_START_CAPTURE=2000, /* Start image capture sequence. Sends CAMERA_IMAGE_CAPTURED after each capture. Use NaN for reserved values. |Reserved (Set to 0)| Desired elapsed time between two consecutive pictures (in seconds). Minimum values depend on hardware (typically greater than 2 seconds).| Total number of images to capture. 0 to capture forever/until MAV_CMD_IMAGE_STOP_CAPTURE.| Capture sequence number starting from 1. This is only valid for single-capture (param3 == 1). Increment the capture ID for each capture command to prevent double captures when a command is re-transmitted. Use 0 to ignore it.| Reserved (all remaining params)| Reserved (default:0)| Reserved (default:0)| */
MAV_CMD_IMAGE_STOP_CAPTURE=2001, /* Stop image capture sequence Use NaN for reserved values. |Reserved (Set to 0)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:0)| Reserved (default:0)| Reserved (default:NaN)| */
MAV_CMD_REQUEST_CAMERA_IMAGE_CAPTURE=2002, /* Re-request a CAMERA_IMAGE_CAPTURE message. |Sequence number for missing CAMERA_IMAGE_CAPTURE message| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:0)| Reserved (default:0)| Reserved (default:NaN)| */
MAV_CMD_REQUEST_CAMERA_IMAGE_CAPTURE=2002, /* Re-request a CAMERA_IMAGE_CAPTURED message. |Sequence number for missing CAMERA_IMAGE_CAPTURED message| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:0)| Reserved (default:0)| Reserved (default:NaN)| */
MAV_CMD_DO_TRIGGER_CONTROL=2003, /* Enable or disable on-board camera triggering system. |Trigger enable/disable (0 for disable, 1 for start), -1 to ignore| 1 to reset the trigger sequence, -1 or 0 to ignore| 1 to pause triggering, but without switching the camera off or retracting it. -1 to ignore| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| */
MAV_CMD_VIDEO_START_CAPTURE=2500, /* Starts video capture (recording). |Video Stream ID (0 for all streams)| Frequency CAMERA_CAPTURE_STATUS messages should be sent while recording (0 for no messages, otherwise frequency)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)| */
MAV_CMD_VIDEO_STOP_CAPTURE=2501, /* Stop the current video capture (recording). |Video Stream ID (0 for all streams)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)| */
......
matrixpilot/version.h
View file @ 2ac294ac
......@@ -7,7 +7,7 @@
#ifndef MAVLINK_VERSION_H
#define MAVLINK_VERSION_H
#define MAVLINK_BUILD_DATE "Sat Apr 25 2020"
#define MAVLINK_BUILD_DATE "Mon Apr 27 2020"
#define MAVLINK_WIRE_PROTOCOL_VERSION "2.0"
#define MAVLINK_MAX_DIALECT_PAYLOAD_SIZE 255
......
message_definitions/common.xml
View file @ 2ac294ac
......@@ -2075,26 +2075,31 @@
<param index="7" label="Response Target" minValue="0" maxValue="2" increment="1">Target address for requested message (if message has target address fields). 0: Flight-stack default, 1: address of requestor, 2: broadcast.</param>
</entry>
<entry value="519" name="MAV_CMD_REQUEST_PROTOCOL_VERSION" hasLocation="false" isDestination="false">
<description>Request MAVLink protocol version compatibility</description>
<deprecated since="2019-08" replaced_by="MAV_CMD_REQUEST_MESSAGE"/>
<description>Request MAVLink protocol version compatibility. All receivers should ACK the command and then emit their capabilities in an PROTOCOL_VERSION message</description>
<param index="1" label="Protocol">1: Request supported protocol versions by all nodes on the network</param>
<param index="2">Reserved (all remaining params)</param>
</entry>
<entry value="520" name="MAV_CMD_REQUEST_AUTOPILOT_CAPABILITIES" hasLocation="false" isDestination="false">
<deprecated since="2019-08" replaced_by="MAV_CMD_REQUEST_MESSAGE"/>
<description>Request autopilot capabilities. The receiver should ACK the command and then emit its capabilities in an AUTOPILOT_VERSION message</description>
<param index="1" label="Version">1: Request autopilot version</param>
<param index="2">Reserved (all remaining params)</param>
</entry>
<entry value="521" name="MAV_CMD_REQUEST_CAMERA_INFORMATION" hasLocation="false" isDestination="false">
<deprecated since="2019-08" replaced_by="MAV_CMD_REQUEST_MESSAGE"/>
<description>Request camera information (CAMERA_INFORMATION).</description>
<param index="1" label="Capabilities" minValue="0" maxValue="1" increment="1">0: No action 1: Request camera capabilities</param>
<param index="2">Reserved (all remaining params)</param>
</entry>
<entry value="522" name="MAV_CMD_REQUEST_CAMERA_SETTINGS" hasLocation="false" isDestination="false">
<deprecated since="2019-08" replaced_by="MAV_CMD_REQUEST_MESSAGE"/>
<description>Request camera settings (CAMERA_SETTINGS).</description>
<param index="1" label="Settings" minValue="0" maxValue="1" increment="1">0: No Action 1: Request camera settings</param>
<param index="2">Reserved (all remaining params)</param>
</entry>
<entry value="525" name="MAV_CMD_REQUEST_STORAGE_INFORMATION" hasLocation="false" isDestination="false">
<deprecated since="2019-08" replaced_by="MAV_CMD_REQUEST_MESSAGE"/>
<description>Request storage information (STORAGE_INFORMATION). Use the command's target_component to target a specific component's storage.</description>
<param index="1" label="Storage ID" minValue="0" increment="1">Storage ID (0 for all, 1 for first, 2 for second, etc.)</param>
<param index="2" label="Information" minValue="0" maxValue="1" increment="1">0: No Action 1: Request storage information</param>
......@@ -2107,11 +2112,13 @@
<param index="3">Reserved (all remaining params)</param>
</entry>
<entry value="527" name="MAV_CMD_REQUEST_CAMERA_CAPTURE_STATUS" hasLocation="false" isDestination="false">
<deprecated since="2019-08" replaced_by="MAV_CMD_REQUEST_MESSAGE"/>
<description>Request camera capture status (CAMERA_CAPTURE_STATUS)</description>
<param index="1" label="Capture Status" minValue="0" maxValue="1" increment="1">0: No Action 1: Request camera capture status</param>
<param index="2">Reserved (all remaining params)</param>
</entry>
<entry value="528" name="MAV_CMD_REQUEST_FLIGHT_INFORMATION" hasLocation="false" isDestination="false">
<deprecated since="2019-08" replaced_by="MAV_CMD_REQUEST_MESSAGE"/>
<wip/>
<!-- This message is work-in-progress and it can therefore change. It should NOT be used in stable production environments. -->
<description>Request flight information (FLIGHT_INFORMATION)</description>
......@@ -2206,10 +2213,11 @@
<param index="7" reserved="True" default="NaN"/>
</entry>
<entry value="2002" name="MAV_CMD_REQUEST_CAMERA_IMAGE_CAPTURE" hasLocation="false" isDestination="false">
<deprecated since="2019-08" replaced_by="MAV_CMD_REQUEST_MESSAGE"/>
<wip/>
<!-- This message is work-in-progress and it can therefore change. It should NOT be used in stable production environments. -->
<description>Re-request a CAMERA_IMAGE_CAPTURE message.</description>
<param index="1" label="Number" minValue="0" increment="1">Sequence number for missing CAMERA_IMAGE_CAPTURE message</param>
<description>Re-request a CAMERA_IMAGE_CAPTURED message.</description>
<param index="1" label="Number" minValue="0" increment="1">Sequence number for missing CAMERA_IMAGE_CAPTURED message</param>
<param index="2" reserved="True" default="NaN"/>
<param index="3" reserved="True" default="NaN"/>
<param index="4" reserved="True" default="NaN"/>
......@@ -2254,12 +2262,14 @@
<param index="1" label="Stream ID" minValue="0" increment="1">Video Stream ID (0 for all streams, 1 for first, 2 for second, etc.)</param>
</entry>
<entry value="2504" name="MAV_CMD_REQUEST_VIDEO_STREAM_INFORMATION" hasLocation="false" isDestination="false">
<deprecated since="2019-08" replaced_by="MAV_CMD_REQUEST_MESSAGE"/>
<wip/>
<!-- This message is work-in-progress and it can therefore change. It should NOT be used in stable production environments. -->
<description>Request video stream information (VIDEO_STREAM_INFORMATION)</description>
<param index="1" label="Stream ID" minValue="0" increment="1">Video Stream ID (0 for all streams, 1 for first, 2 for second, etc.)</param>
</entry>
<entry value="2505" name="MAV_CMD_REQUEST_VIDEO_STREAM_STATUS" hasLocation="false" isDestination="false">
<deprecated since="2019-08" replaced_by="MAV_CMD_REQUEST_MESSAGE"/>
<wip/>
<!-- This message is work-in-progress and it can therefore change. It should NOT be used in stable production environments. -->
<description>Request video stream status (VIDEO_STREAM_STATUS)</description>
......@@ -3602,7 +3612,7 @@
<description>Camera has basic focus control (MAV_CMD_SET_CAMERA_FOCUS)</description>
</entry>
<entry value="256" name="CAMERA_CAP_FLAGS_HAS_VIDEO_STREAM">
<description>Camera has video streaming capabilities (use MAV_CMD_REQUEST_VIDEO_STREAM_INFORMATION for video streaming info)</description>
<description>Camera has video streaming capabilities (request VIDEO_STREAM_INFORMATION with MAV_CMD_REQUEST_MESSAGE for video streaming info)</description>
</entry>
</enum>
<enum name="VIDEO_STREAM_STATUS_FLAGS" bitmask="true">
......@@ -5690,7 +5700,7 @@
<field type="uint8_t" name="charge_state" enum="MAV_BATTERY_CHARGE_STATE">State for extent of discharge, provided by autopilot for warning or external reactions</field>
</message>
<message id="148" name="AUTOPILOT_VERSION">
<description>Version and capability of autopilot software. This should be emitted in response to a MAV_CMD_REQUEST_AUTOPILOT_CAPABILITIES command.</description>
<description>Version and capability of autopilot software. This should be emitted in response to a request with MAV_CMD_REQUEST_MESSAGE.</description>
<field type="uint64_t" name="capabilities" enum="MAV_PROTOCOL_CAPABILITY" display="bitmask">Bitmap of capabilities</field>
<field type="uint32_t" name="flight_sw_version">Firmware version number</field>
<field type="uint32_t" name="middleware_sw_version">Middleware version number</field>
......@@ -5997,7 +6007,7 @@
<field type="char[200]" name="tune2">tune extension (appended to tune)</field>
</message>
<message id="259" name="CAMERA_INFORMATION">
<description>Information about a camera</description>
<description>Information about a camera. Can be requested with a MAV_CMD_REQUEST_MESSAGE command.</description>
<field type="uint32_t" name="time_boot_ms" units="ms">Timestamp (time since system boot).</field>
<field type="uint8_t[32]" name="vendor_name">Name of the camera vendor</field>
<field type="uint8_t[32]" name="model_name">Name of the camera model</field>
......@@ -6013,7 +6023,7 @@
<field type="char[140]" name="cam_definition_uri">Camera definition URI (if any, otherwise only basic functions will be available). HTTP- (http://) and MAVLink FTP- (mavlinkftp://) formatted URIs are allowed (and both must be supported by any GCS that implements the Camera Protocol).</field>
</message>
<message id="260" name="CAMERA_SETTINGS">
<description>Settings of a camera, can be requested using MAV_CMD_REQUEST_CAMERA_SETTINGS.</description>
<description>Settings of a camera. Can be requested with a MAV_CMD_REQUEST_MESSAGE command.</description>
<field type="uint32_t" name="time_boot_ms" units="ms">Timestamp (time since system boot).</field>
<field type="uint8_t" name="mode_id" enum="CAMERA_MODE">Camera mode</field>
<extensions/>
......@@ -6021,7 +6031,7 @@
<field type="float" name="focusLevel">Current focus level (0.0 to 100.0, NaN if not known)</field>
</message>
<message id="261" name="STORAGE_INFORMATION">
<description>Information about a storage medium. This message is sent in response to a request and whenever the status of the storage changes (STORAGE_STATUS).</description>
<description>Information about a storage medium. This message is sent in response to a request with MAV_CMD_REQUEST_MESSAGE and whenever the status of the storage changes (STORAGE_STATUS). Use MAV_CMD_REQUEST_MESSAGE.param2 to indicate the index/id of requested storage: 0 for all, 1 for first, 2 for second, etc.</description>
<field type="uint32_t" name="time_boot_ms" units="ms">Timestamp (time since system boot).</field>
<field type="uint8_t" name="storage_id">Storage ID (1 for first, 2 for second, etc.)</field>
<field type="uint8_t" name="storage_count">Number of storage devices</field>
......@@ -6033,7 +6043,7 @@
<field type="float" name="write_speed" units="MiB/s">Write speed.</field>
</message>
<message id="262" name="CAMERA_CAPTURE_STATUS">
<description>Information about the status of a capture.</description>
<description>Information about the status of a capture. Can be requested with a MAV_CMD_REQUEST_MESSAGE command.</description>
<field type="uint32_t" name="time_boot_ms" units="ms">Timestamp (time since system boot).</field>
<field type="uint8_t" name="image_status">Current status of image capturing (0: idle, 1: capture in progress, 2: interval set but idle, 3: interval set and capture in progress)</field>
<field type="uint8_t" name="video_status">Current status of video capturing (0: idle, 1: capture in progress)</field>
......@@ -6042,7 +6052,7 @@
<field type="float" name="available_capacity" units="MiB">Available storage capacity.</field>
</message>
<message id="263" name="CAMERA_IMAGE_CAPTURED">
<description>Information about a captured image</description>
<description>Information about a captured image. This is emitted every time a message is captured. It may be re-requested using MAV_CMD_REQUEST_MESSAGE, using param2 to indicate the sequence number for the missing image.</description>
<field type="uint32_t" name="time_boot_ms" units="ms">Timestamp (time since system boot).</field>
<field type="uint64_t" name="time_utc" units="us">Timestamp (time since UNIX epoch) in UTC. 0 for unknown.</field>
<field type="uint8_t" name="camera_id">Camera ID (1 for first, 2 for second, etc.)</field>
......@@ -6101,7 +6111,7 @@
<message id="269" name="VIDEO_STREAM_INFORMATION">
<wip/>
<!-- This message is work-in-progress and it can therefore change. It should NOT be used in stable production environments. -->
<description>Information about video stream</description>
<description>Information about video stream. It may be requested using MAV_CMD_REQUEST_MESSAGE, where param2 indicates the video stream id: 0 for all streams, 1 for first, 2 for second, etc.</description>
<field type="uint8_t" name="stream_id">Video Stream ID (1 for first, 2 for second, etc.)</field>
<field type="uint8_t" name="count">Number of streams available.</field>
<field type="uint8_t" name="type" enum="VIDEO_STREAM_TYPE">Type of stream.</field>
......@@ -6118,7 +6128,7 @@
<message id="270" name="VIDEO_STREAM_STATUS">
<wip/>
<!-- This message is work-in-progress and it can therefore change. It should NOT be used in stable production environments. -->
<description>Information about the status of a video stream.</description>
<description>Information about the status of a video stream. It may be requested using MAV_CMD_REQUEST_MESSAGE.</description>
<field type="uint8_t" name="stream_id">Video Stream ID (1 for first, 2 for second, etc.)</field>
<field type="uint16_t" name="flags" enum="VIDEO_STREAM_STATUS_FLAGS">Bitmap of stream status flags</field>
<field type="float" name="framerate" units="Hz">Frame rate</field>
......@@ -6226,7 +6236,7 @@
<message id="300" name="PROTOCOL_VERSION">
<wip/>
<!-- This message is work-in-progress and it can therefore change. It should NOT be used in stable production environments. -->
<description>Version and capability of protocol version. This message is the response to REQUEST_PROTOCOL_VERSION and is used as part of the handshaking to establish which MAVLink version should be used on the network. Every node should respond to REQUEST_PROTOCOL_VERSION to enable the handshaking. Library implementers should consider adding this into the default decoding state machine to allow the protocol core to respond directly.</description>
<description>Version and capability of protocol version. This message can be requested with MAV_CMD_REQUEST_MESSAGE and is used as part of the handshaking to establish which MAVLink version should be used on the network. Every node should respond to a request for PROTOCOL_VERSION to enable the handshaking. Library implementers should consider adding this into the default decoding state machine to allow the protocol core to respond directly.</description>
<field type="uint16_t" name="version">Currently active MAVLink version number * 100: v1.0 is 100, v2.0 is 200, etc.</field>
<field type="uint16_t" name="min_version">Minimum MAVLink version supported</field>
<field type="uint16_t" name="max_version">Maximum MAVLink version supported (set to the same value as version by default)</field>
......
message_definitions/minimal.xml
View file @ 2ac294ac
......@@ -615,7 +615,13 @@
</enum>
<enum name="MAV_CMD">
<description>Commands to be executed by the MAV. They can be executed on user request, or as part of a mission script. If the action is used in a mission, the parameter mapping to the waypoint/mission message is as follows: Param 1, Param 2, Param 3, Param 4, X: Param 5, Y:Param 6, Z:Param 7. This command list is similar what ARINC 424 is for commercial aircraft: A data format how to interpret waypoint/mission data. See https://mavlink.io/en/guide/xml_schema.html#MAV_CMD for information about the structure of the MAV_CMD entries</description>
<entry value="512" name="MAV_CMD_REQUEST_MESSAGE" hasLocation="false" isDestination="false">
<description>Request the target system(s) emit a single instance of a specified message (i.e. a "one-shot" version of MAV_CMD_SET_MESSAGE_INTERVAL).</description>
<param index="1" label="Message ID" minValue="0" maxValue="16777215" increment="1">The MAVLink message ID of the requested message.</param>
<param index="2" label="Index ID" minValue="0" increment="1">Index id (if appropriate). The use of this parameter (if any), must be defined in the requested message.</param>
</entry>
<entry value="519" name="MAV_CMD_REQUEST_PROTOCOL_VERSION" hasLocation="false" isDestination="false">
<deprecated since="2019-08" replaced_by="MAV_CMD_REQUEST_MESSAGE"/>
<description>Request MAVLink protocol version compatibility</description>
<param index="1" label="Protocol">1: Request supported protocol versions by all nodes on the network</param>
<param index="2">Reserved (all remaining params)</param>
......
minimal/minimal.h
View file @ 2ac294ac
......@@ -291,6 +291,7 @@ typedef enum MAV_COMPONENT
#define HAVE_ENUM_MAV_CMD
typedef enum MAV_CMD
{
MAV_CMD_REQUEST_MESSAGE=512, /* Request the target system(s) emit a single instance of a specified message (i.e. a "one-shot" version of MAV_CMD_SET_MESSAGE_INTERVAL). |The MAVLink message ID of the requested message.| Index id (if appropriate). The use of this parameter (if any), must be defined in the requested message.| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| */
MAV_CMD_REQUEST_PROTOCOL_VERSION=519, /* Request MAVLink protocol version compatibility |1: Request supported protocol versions by all nodes on the network| Reserved (all remaining params)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| */
MAV_CMD_ENUM_END=520, /* | */
} MAV_CMD;
......
minimal/version.h
View file @ 2ac294ac
......@@ -7,7 +7,7 @@
#ifndef MAVLINK_VERSION_H
#define MAVLINK_VERSION_H
#define MAVLINK_BUILD_DATE "Sat Apr 25 2020"
#define MAVLINK_BUILD_DATE "Mon Apr 27 2020"
#define MAVLINK_WIRE_PROTOCOL_VERSION "2.0"
#define MAVLINK_MAX_DIALECT_PAYLOAD_SIZE 22
......
slugs/slugs.h
View file @ 2ac294ac
......@@ -123,7 +123,7 @@ typedef enum MAV_CMD
MAV_CMD_GET_MESSAGE_INTERVAL=510, /* Request the interval between messages for a particular MAVLink message ID. The receiver should ACK the command and then emit its response in a MESSAGE_INTERVAL message. |The MAVLink message ID| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| */
MAV_CMD_SET_MESSAGE_INTERVAL=511, /* Set the interval between messages for a particular MAVLink message ID. This interface replaces REQUEST_DATA_STREAM. |The MAVLink message ID| The interval between two messages. Set to -1 to disable and 0 to request default rate.| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Target address of message stream (if message has target address fields). 0: Flight-stack default (recommended), 1: address of requestor, 2: broadcast.| */
MAV_CMD_REQUEST_MESSAGE=512, /* Request the target system(s) emit a single instance of a specified message (i.e. a "one-shot" version of MAV_CMD_SET_MESSAGE_INTERVAL). |The MAVLink message ID of the requested message.| Index id (if appropriate). The use of this parameter (if any), must be defined in the requested message.| The use of this parameter (if any), must be defined in the requested message. By default assumed not used (0).| The use of this parameter (if any), must be defined in the requested message. By default assumed not used (0).| The use of this parameter (if any), must be defined in the requested message. By default assumed not used (0).| The use of this parameter (if any), must be defined in the requested message. By default assumed not used (0).| Target address for requested message (if message has target address fields). 0: Flight-stack default, 1: address of requestor, 2: broadcast.| */
MAV_CMD_REQUEST_PROTOCOL_VERSION=519, /* Request MAVLink protocol version compatibility |1: Request supported protocol versions by all nodes on the network| Reserved (all remaining params)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| */
MAV_CMD_REQUEST_PROTOCOL_VERSION=519, /* Request MAVLink protocol version compatibility. All receivers should ACK the command and then emit their capabilities in an PROTOCOL_VERSION message |1: Request supported protocol versions by all nodes on the network| Reserved (all remaining params)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| */
MAV_CMD_REQUEST_AUTOPILOT_CAPABILITIES=520, /* Request autopilot capabilities. The receiver should ACK the command and then emit its capabilities in an AUTOPILOT_VERSION message |1: Request autopilot version| Reserved (all remaining params)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| */
MAV_CMD_REQUEST_CAMERA_INFORMATION=521, /* Request camera information (CAMERA_INFORMATION). |0: No action 1: Request camera capabilities| Reserved (all remaining params)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| */
MAV_CMD_REQUEST_CAMERA_SETTINGS=522, /* Request camera settings (CAMERA_SETTINGS). |0: No Action 1: Request camera settings| Reserved (all remaining params)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| */
......@@ -142,7 +142,7 @@ typedef enum MAV_CMD
MAV_CMD_DO_GIMBAL_MANAGER_TRACK_RECTANGLE=1002, /* If the gimbal supports visual tracking (GIMBAL_MANAGER_CAP_FLAGS_HAS_TRACKING_RECTANGLE is set), this command allows to initiate the tracking. Such a tracking gimbal manager would usually be an integrated camera/gimbal, or alternatively a companion computer connected to a camera. |Top left corner of rectangle x value (normalized 0..1, 0 is left, 1 is right).| Top left corner of rectangle y value (normalized 0..1, 0 is top, 1 is bottom).| Bottom right corner of rectangle x value (normalized 0..1, 0 is left, 1 is right).| Bottom right corner of rectangle y value (normalized 0..1, 0 is top, 1 is bottom).| Reserved (default:0)| Reserved (default:0)| Component ID of gimbal device to address (or 1-6 for non-MAVLink gimbal), 0 for all gimbal device components. (Send command multiple times for more than one but not all gimbals.)| */
MAV_CMD_IMAGE_START_CAPTURE=2000, /* Start image capture sequence. Sends CAMERA_IMAGE_CAPTURED after each capture. Use NaN for reserved values. |Reserved (Set to 0)| Desired elapsed time between two consecutive pictures (in seconds). Minimum values depend on hardware (typically greater than 2 seconds).| Total number of images to capture. 0 to capture forever/until MAV_CMD_IMAGE_STOP_CAPTURE.| Capture sequence number starting from 1. This is only valid for single-capture (param3 == 1). Increment the capture ID for each capture command to prevent double captures when a command is re-transmitted. Use 0 to ignore it.| Reserved (all remaining params)| Reserved (default:0)| Reserved (default:0)| */
MAV_CMD_IMAGE_STOP_CAPTURE=2001, /* Stop image capture sequence Use NaN for reserved values. |Reserved (Set to 0)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:0)| Reserved (default:0)| Reserved (default:NaN)| */
MAV_CMD_REQUEST_CAMERA_IMAGE_CAPTURE=2002, /* Re-request a CAMERA_IMAGE_CAPTURE message. |Sequence number for missing CAMERA_IMAGE_CAPTURE message| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:0)| Reserved (default:0)| Reserved (default:NaN)| */
MAV_CMD_REQUEST_CAMERA_IMAGE_CAPTURE=2002, /* Re-request a CAMERA_IMAGE_CAPTURED message. |Sequence number for missing CAMERA_IMAGE_CAPTURED message| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:0)| Reserved (default:0)| Reserved (default:NaN)| */
MAV_CMD_DO_TRIGGER_CONTROL=2003, /* Enable or disable on-board camera triggering system. |Trigger enable/disable (0 for disable, 1 for start), -1 to ignore| 1 to reset the trigger sequence, -1 or 0 to ignore| 1 to pause triggering, but without switching the camera off or retracting it. -1 to ignore| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| */
MAV_CMD_VIDEO_START_CAPTURE=2500, /* Starts video capture (recording). |Video Stream ID (0 for all streams)| Frequency CAMERA_CAPTURE_STATUS messages should be sent while recording (0 for no messages, otherwise frequency)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)| */
MAV_CMD_VIDEO_STOP_CAPTURE=2501, /* Stop the current video capture (recording). |Video Stream ID (0 for all streams)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)| Reserved (default:NaN)| */
......
slugs/version.h
View file @ 2ac294ac
......@@ -7,7 +7,7 @@
#ifndef MAVLINK_VERSION_H
#define MAVLINK_VERSION_H
#define MAVLINK_BUILD_DATE "Sat Apr 25 2020"
#define MAVLINK_BUILD_DATE "Mon Apr 27 2020"
#define MAVLINK_WIRE_PROTOCOL_VERSION "2.0"
#define MAVLINK_MAX_DIALECT_PAYLOAD_SIZE 255
......
standard/version.h
View file @ 2ac294ac
......@@ -7,7 +7,7 @@
#ifndef MAVLINK_VERSION_H
#define MAVLINK_VERSION_H
#define MAVLINK_BUILD_DATE "Sat Apr 25 2020"
#define MAVLINK_BUILD_DATE "Mon Apr 27 2020"
#define MAVLINK_WIRE_PROTOCOL_VERSION "2.0"
#define MAVLINK_MAX_DIALECT_PAYLOAD_SIZE 255
......
test/version.h
View file @ 2ac294ac
......@@ -7,7 +7,7 @@
#ifndef MAVLINK_VERSION_H
#define MAVLINK_VERSION_H
#define MAVLINK_BUILD_DATE "Sat Apr 25 2020"
#define MAVLINK_BUILD_DATE "Mon Apr 27 2020"
#define MAVLINK_WIRE_PROTOCOL_VERSION "2.0"
#define MAVLINK_MAX_DIALECT_PAYLOAD_SIZE 179
......
uAvionix/version.h
View file @ 2ac294ac
......@@ -7,7 +7,7 @@
#ifndef MAVLINK_VERSION_H
#define MAVLINK_VERSION_H
#define MAVLINK_BUILD_DATE "Sat Apr 25 2020"
#define MAVLINK_BUILD_DATE "Mon Apr 27 2020"
#define MAVLINK_WIRE_PROTOCOL_VERSION "2.0"
#define MAVLINK_MAX_DIALECT_PAYLOAD_SIZE 255
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7