Skip to content

G
gitlab-ce
Commit 3f9abf64 authored by Amy Qualls's avatar Amy Qualls
Browse files
Options

Split sections apart into 3 pages 

I can't clean these up just yet, but step 1 is to get these pages
chopped apart so they can be edited in parallel.
parent b0df8b32
Hide whitespace changes
Inline Side-by-side
Showing with 435 additions and 417 deletions
doc/user/project/repository/mirror/bidirectional.md
View file @ 3f9abf64
---
stage: Create
group: Source Code
info: To determine the technical writer assigned to the Stage/Group associated with this page, see https://about.gitlab.com/handbook/engineering/ux/technical-writing/#assignments
disqus_identifier: 'https://docs.gitlab.com/ee/workflow/repository_mirroring.html'
---
# Bidirectional mirroring **(PREMIUM)**
> Moved to GitLab Premium in 13.9.
WARNING:
Bidirectional mirroring may cause conflicts.
If you configure a GitLab repository to both pull from, and push to, the same remote source, there
is no guarantee that either repository updates correctly. If you set up a repository for
bidirectional mirroring, you should prepare for the likely conflicts by deciding who resolves
them and how.
Rewriting any mirrored commit on either remote causes conflicts and mirroring to fail. This can
be prevented by [mirroring only protected branches](#mirror-only-protected-branches).
You should [protect the branches](../protected_branches.md) you wish to mirror on both
remotes to prevent conflicts caused by rewriting history.
Bidirectional mirroring also creates a race condition where commits made close together to the same
branch causes conflicts. The race condition can be mitigated by reducing the mirroring delay by using
a [Push event webhook](../integrations/webhooks.md#push-events) to trigger an immediate
pull to GitLab. Push mirroring from GitLab is rate limited to once per minute when only push mirroring
protected branches.
## Configure a webhook to trigger an immediate pull to GitLab
Assuming you have already configured the [push](#set-up-a-push-mirror-to-another-gitlab-instance-with-2fa-activated)
and [pull](#pull-from-a-remote-repository) mirrors in the upstream GitLab instance, to trigger an
immediate pull as suggested above, you must configure a [Push Event Web Hook](../integrations/webhooks.md#push-events)
in the downstream instance.
To do this:
1. Create a [personal access token](../../profile/personal_access_tokens.md) with `API` scope.
1. In your project, go to **Settings > Webhooks**.
1. Add the webhook URL which (in this case) uses the [Pull Mirror API](../../../api/projects.md#start-the-pull-mirroring-process-for-a-project)
request to trigger an immediate pull after updates to the repository.
```plaintext
https://gitlab.example.com/api/v4/projects/:id/mirror/pull?private_token=<your_access_token>
```
1. Ensure the **Push Events** checkbox is selected.
1. Select **Add Webhook** to save the webhook.
To test the integration, select the **Test** button and confirm GitLab doesn't return an error message.
## Prevent conflicts using a pre-receive hook
WARNING:
The solution proposed negatively affects the performance of
Git push operations because they are proxied to the upstream Git
repository.
A server-side `pre-receive` hook can be used to prevent the race condition
described above by only accepting the push after first pushing the commit to
the upstream Git repository. In this configuration one Git repository acts as
the authoritative upstream, and the other as downstream. The `pre-receive` hook
is installed on the downstream repository.
Read about [configuring Server hooks](../../../administration/server_hooks.md) on the GitLab server.
A sample `pre-receive` hook is provided below.
```shell
#!/usr/bin/env bash
# --- Assume only one push mirror target
# Push mirroring remotes are named `remote_mirror_<id>`, this finds the first remote and uses that.
TARGET_REPO=$(git remote | grep -m 1 remote_mirror)
proxy_push()
{
# --- Arguments
OLDREV=$(git rev-parse $1)
NEWREV=$(git rev-parse $2)
REFNAME="$3"
# --- Pattern of branches to proxy pushes
allowlist=$(expr "$branch" : "\(master\)")
case "$refname" in
refs/heads/*)
branch=$(expr "$refname" : "refs/heads/\(.*\)")
if [ "$allowlist" = "$branch" ]; then
unset GIT_QUARANTINE_PATH # handle https://git-scm.com/docs/git-receive-pack#_quarantine_environment
error="$(git push --quiet $TARGET_REPO $NEWREV:$REFNAME 2>&1)"
fail=$?
if [ "$fail" != "0" ]; then
echo >&2 ""
echo >&2 " Error: updates were rejected by upstream server"
echo >&2 " This is usually caused by another repository pushing changes"
echo >&2 " to the same ref. You may want to first integrate remote changes"
echo >&2 ""
return
fi
fi
;;
esac
}
# Allow dual mode: run from the command line just like the update hook, or
# if no arguments are given then run as a hook script
if [ -n "$1" -a -n "$2" -a -n "$3" ]; then
# Output to the terminal in command line mode - if someone wanted to
# resend an email; they could redirect the output to sendmail
# themselves
PAGER= proxy_push $2 $3 $1
else
# Push is proxied upstream one ref at a time. Because of this it is possible
# for some refs to succeed, and others to fail. This will result in a failed
# push.
while read oldrev newrev refname
do
proxy_push $oldrev $newrev $refname
done
fi
```
Note that this sample has a few limitations:
- This example may not work verbatim for your use case and might need modification.
- It doesn't regard different types of authentication mechanisms for the mirror.
- It doesn't work with forced updates (rewriting history).
- Only branches that match the `allowlist` patterns are proxy pushed.
- The script circumvents the Git hook quarantine environment because the update of `$TARGET_REPO`
is seen as a ref update, and Git displays warnings about it.
## Mirror with Perforce Helix via Git Fusion **(PREMIUM)**
> Moved to GitLab Premium in 13.9.
WARNING:
Bidirectional mirroring should not be used as a permanent configuration. Refer to
[Migrating from Perforce Helix](../import/perforce.md) for alternative migration approaches.
[Git Fusion](https://www.perforce.com/manuals/git-fusion/#Git-Fusion/section_avy_hyc_gl.html) provides a Git interface
to [Perforce Helix](https://www.perforce.com/products) which can be used by GitLab to bidirectionally
mirror projects with GitLab. This can help you in some situations when migrating from Perforce Helix
to GitLab where overlapping Perforce Helix workspaces cannot be migrated simultaneously to GitLab.
If using mirroring with Perforce Helix, you should only mirror protected branches. Perforce Helix
rejects any pushes that rewrite history. Only the fewest number of branches should be mirrored
due to the performance limitations of Git Fusion.
When configuring mirroring with Perforce Helix via Git Fusion, the following Git Fusion
settings are recommended:
- `change-pusher` should be disabled. Otherwise, every commit is rewritten as being committed
by the mirroring account, rather than being mapped to existing Perforce Helix users or the `unknown_git` user.
- `unknown_git` user is used as the commit author if the GitLab user doesn't exist in
Perforce Helix.
Read about [Git Fusion settings on Perforce.com](https://www.perforce.com/manuals/git-fusion/Content/Git-Fusion/section_vss_bdw_w3.html#section_zdp_zz1_3l).
doc/user/project/repository/mirror/index.md
View file @ 3f9abf64
......@@ -51,266 +51,6 @@ The following are some possible use cases for repository mirroring:
GitLab.com repository that's public, allows you to open source specific projects and contribute back
to the open source community.
## Push to a remote repository
> [Introduced](https://gitlab.com/gitlab-org/gitlab/-/merge_requests/40137) in GitLab 13.5: LFS support over HTTPS.
For an existing project, you can set up push mirroring as follows:
1. In your project, go to **Settings > Repository**, and then expand the **Mirroring repositories** section.
1. Enter a repository URL.
1. In the **Mirror direction** dropdown, select **Push**.
1. Select an authentication method from the **Authentication method** dropdown.
You can authenticate with either a password or an [SSH key](#ssh-authentication).
1. Select the **Only mirror protected branches** checkbox, if necessary.
1. Select the **Keep divergent refs** checkbox, if desired.
1. Select **Mirror repository** to save the configuration.
When push mirroring is enabled, only push commits directly to the mirrored repository to prevent the
mirror diverging.
Unlike [pull mirroring](#how-it-works), the mirrored repository is not periodically auto-synced.
The mirrored repository receives all changes only when:
- Commits are pushed to GitLab.
- A [forced update](#force-an-update) is initiated.
Changes pushed to files in the repository are automatically pushed to the remote mirror at least:
- Within five minutes of being received.
- Within one minute if **Only mirror protected branches** is enabled.
In the case of a diverged branch, an error displays in the **Mirroring repositories**
section.
### Configure push mirrors through the API
You can also create and modify project push mirrors through the
[remote mirrors API](../../../api/remote_mirrors.md).
### Keep divergent refs
> [Introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/208828) in GitLab 13.0.
By default, if any ref (branch or tag) on the remote mirror has diverged from the local repository, the local differences are forced to the remote.
For example, if a repository has `main` and `develop` branches that
have been mirrored to a remote, and then a new commit is added to `develop` on
the remote mirror. The next push updates all of the references on the remote mirror to match
the local repository, and the new commit added to the remote `develop` branch is lost.
With the **Keep divergent refs** option enabled, the `develop` branch is
skipped, causing only `main` to be updated. The mirror status
reflects that `develop` has diverged and was skipped, and be marked as a
failed update. Refs that exist in the mirror repository but not in the local
repository are left untouched.
NOTE:
After the mirror is created, this option can only be modified via the [API](../../../api/remote_mirrors.md).
### Set up a push mirror from GitLab to GitHub
To set up a mirror from GitLab to GitHub, you must follow these steps:
1. Create a [GitHub personal access token](https://docs.github.com/en/github/authenticating-to-github/keeping-your-account-and-data-secure/creating-a-personal-access-token) with the `public_repo` box checked.
1. Fill in the **Git repository URL** field using this format: `https://<your_github_username>@github.com/<your_github_group>/<your_github_project>.git`.
1. Fill in **Password** field with your GitHub personal access token.
1. Select **Mirror repository**.
The mirrored repository is listed. For example, `https://*****:*****@github.com/<your_github_group>/<your_github_project>.git`.
The repository pushes shortly thereafter. To force a push, select the **Update now** (**{retry}**) button.
### Set up a push mirror from GitLab to AWS CodeCommit
AWS CodeCommit push mirroring is the best way to connect GitLab repositories to
AWS CodePipeline, as GitLab isn't yet supported as one of their Source Code Management (SCM) providers.
Each new AWS CodePipeline needs significant AWS infrastructure setup. It also
requires an individual pipeline per branch.
If AWS CodeDeploy is the final step of a CodePipeline, you can, instead, leverage
GitLab CI/CD pipelines and use the AWS CLI in the final job in `.gitlab-ci.yml`
to deploy to CodeDeploy.
NOTE:
GitLab-to-AWS-CodeCommit push mirroring cannot use SSH authentication until [GitLab issue 34014](https://gitlab.com/gitlab-org/gitlab/-/issues/34014) is resolved.
To set up a mirror from GitLab to AWS CodeCommit:
1. In the AWS IAM console, create an IAM user.
1. Add the following least privileges permissions for repository mirroring as an "inline policy".
The Amazon Resource Names (ARNs) must explicitly include the region and account. The IAM policy
below grants privilege for mirroring access to two sample repositories. These permissions have
been tested to be the minimum (least privileged) required for mirroring:
```json
{
"Version": "2012-10-17",
"Statement": [
{
"Sid": "MinimumGitLabPushMirroringPermissions",
"Effect": "Allow",
"Action": [
"codecommit:GitPull",
"codecommit:GitPush"
],
"Resource": [
"arn:aws:codecommit:us-east-1:111111111111:MyDestinationRepo",
"arn:aws:codecommit:us-east-1:111111111111:MyDemo*"
]
}
]
}
```
1. After the user was created, select the AWS IAM user name.
1. Select the **Security credentials** tab.
1. Under **HTTPS Git credentials for AWS CodeCommit** select **Generate credentials**.
NOTE:
This Git user ID and password is specific to communicating with CodeCommit. Do
not confuse it with the IAM user ID or AWS keys of this user.
1. Copy or download special Git HTTPS user ID and password.
1. In the AWS CodeCommit console, create a new repository to mirror from your GitLab repository.
1. Open your new repository, and then select **Clone URL > Clone HTTPS** (not **Clone HTTPS (GRC)**).
1. In GitLab, open the repository to be push-mirrored.
1. Go to **Settings > Repository**, and then expand **Mirroring repositories**.
1. Fill in the **Git repository URL** field using this format:
```plaintext
https://<your_aws_git_userid>@git-codecommit.<aws-region>.amazonaws.com/v1/repos/<your_codecommit_repo>
```
Replace `<your_aws_git_userid>` with the AWS **special HTTPS Git user ID** from the IAM Git
credentials created earlier. Replace `<your_codecommit_repo>` with the name of your repository in CodeCommit.
1. For **Mirror direction**, select **Push**.
1. For **Authentication method**, select **Password** and fill in the **Password** field with the special IAM Git clone user ID **password** created earlier in AWS.
1. The option **Only mirror protected branches** should be good for CodeCommit as it pushes more
frequently (from every five minutes to every minute).
CodePipeline requires individual pipeline setups for named branches you wish to have a AWS CI setup for. Because feature branches that have dynamic names are unsupported, configuring **Only mirror protected branches** doesn't cause flexibility problems with CodePipeline integration as long as you are also willing to protect all the named branches you want to build CodePipelines for.
1. Select **Mirror repository**. You should see the mirrored repository appear:
```plaintext
https://*****:*****@git-codecommit.<aws-region>.amazonaws.com/v1/repos/<your_codecommit_repo>
```
To test mirroring by forcing a push, select the half-circle arrows button (hover text is **Update now**).
If **Last successful update** shows a date, you have configured mirroring correctly.
If it isn't working correctly, a red `error` tag appears and shows the error message as hover text.
### Set up a push mirror to another GitLab instance with 2FA activated
1. On the destination GitLab instance, create a [personal access token](../../profile/personal_access_tokens.md) with `write_repository` scope.
1. On the source GitLab instance:
1. Fill in the **Git repository URL** field using this format: `https://oauth2@<destination host>/<your_gitlab_group_or_name>/<your_gitlab_project>.git`.
1. Fill in the **Password** field with the GitLab personal access token created on the destination GitLab instance.
1. Select **Mirror repository**.
## Pull from a remote repository **(PREMIUM)**
> - [Added Git LFS support](https://gitlab.com/gitlab-org/gitlab/-/issues/10871) in GitLab 11.11.
> - Moved to GitLab Premium in 13.9.
You can set up a repository to automatically have its branches, tags, and commits updated from an
upstream repository.
If a repository you're interested in is located on a different server, and you want
to browse its content and its activity using the GitLab interface, you can configure
mirror pulling:
1. If your remote repository is on GitHub and you have
[two-factor authentication (2FA) configured](https://docs.github.com/en/github/authenticating-to-github/securing-your-account-with-two-factor-authentication-2fa),
create a [personal access token for GitHub](https://docs.github.com/en/github/authenticating-to-github/keeping-your-account-and-data-secure/creating-a-personal-access-token).
with the `repo` scope. If 2FA is enabled, this personal access
token serves as your GitHub password.
1. In your project, go to **Settings > Repository**, and then expand the
**Mirroring repositories** section.
1. In the **Git repository URL** field, enter a repository URL. Include the username
in the URL if required: `https://MYUSERNAME@github.com/group/PROJECTNAME.git`
1. In the **Mirror direction** dropdown, select **Pull**.
1. In the **Authentication method** dropdown, select your authentication method.
1. Select from the following checkboxes, if needed:
- **Overwrite diverged branches**
- **Trigger pipelines for mirror updates**
- **Only mirror protected branches**
1. Select **Mirror repository** to save the configuration.
Because GitLab is now set to pull changes from the upstream repository, you should not push commits
directly to the repository on GitLab. Instead, any commits should be pushed to the remote repository.
Changes pushed to the remote repository are pulled into the GitLab repository, either:
- Automatically in a certain period of time.
- When a [forced update](#force-an-update) is initiated.
WARNING:
If you do manually update a branch in the GitLab repository, the branch becomes diverged from
upstream, and GitLab no longer automatically updates this branch to prevent any changes from being lost.
Deleted branches and tags in the upstream repository are not reflected in the GitLab repository.
### How it works
After the pull mirroring feature has been enabled for a repository, the repository is added to a queue.
Once per minute, a Sidekiq cron job schedules repository mirrors to update, based on:
- The capacity available. This is determined by Sidekiq settings. For GitLab.com, see [GitLab.com Sidekiq settings](../../gitlab_com/index.md#sidekiq).
- The number of repository mirrors already in the queue that are due to be updated. Being due depends on when the repository mirror was last updated and how many times it's been retried.
Repository mirrors are updated as Sidekiq becomes available to process them. If the process of updating the repository mirror:
- **Succeeds**: An update is enqueued again with at least a 30 minute wait.
- **Fails**: (For example, a branch diverged from upstream.), The update attempted again later. Mirrors can fail
up to 14 times before they are no longer enqueued for updates.
### Overwrite diverged branches **(PREMIUM)**
> Moved to GitLab Premium in 13.9.
You can choose to always update your local branches with remote versions, even if they have
diverged from the remote.
WARNING:
For mirrored branches, enabling this option results in the loss of local changes.
To use this option, check the **Overwrite diverged branches** box when creating a repository mirror.
### Trigger pipelines for mirror updates **(PREMIUM)**
> Moved to GitLab Premium in 13.9.
If this option is enabled, pipelines trigger when branches or tags are
updated from the remote repository. Depending on the activity of the remote
repository, this may greatly increase the load on your CI runners. Only enable
this if you know they can handle the load. CI uses the credentials
assigned when you set up pull mirroring.
### Hard failure **(PREMIUM)**
> Moved to GitLab Premium in 13.9.
After 14 consecutive unsuccessful retries, the mirroring process is marked as a hard failure
and mirroring attempts stop. This failure is visible in either the:
- Project's main dashboard.
- Pull mirror settings page.
You can resume the project mirroring again by [forcing an update](#force-an-update).
### Trigger an update using the API **(PREMIUM)**
> Moved to GitLab Premium in 13.9.
Pull mirroring uses polling to detect new branches and commits added upstream, often minutes
afterwards. If you notify GitLab by [API](../../../api/projects.md#start-the-pull-mirroring-process-for-a-project),
updates are pulled immediately.
For more information, see [Start the pull mirroring process for a Project](../../../api/projects.md#start-the-pull-mirroring-process-for-a-project).
## Mirror only protected branches **(PREMIUM)**
> Moved to GitLab Premium in 13.9.
......@@ -421,163 +161,6 @@ update button which is available on the **Mirroring repositories** section of th
![Repository mirroring force update user interface](img/repository_mirroring_force_update.png)
## Bidirectional mirroring **(PREMIUM)**
> Moved to GitLab Premium in 13.9.
WARNING:
Bidirectional mirroring may cause conflicts.
If you configure a GitLab repository to both pull from, and push to, the same remote source, there
is no guarantee that either repository updates correctly. If you set up a repository for
bidirectional mirroring, you should prepare for the likely conflicts by deciding who resolves
them and how.
Rewriting any mirrored commit on either remote causes conflicts and mirroring to fail. This can
be prevented by [mirroring only protected branches](#mirror-only-protected-branches).
You should [protect the branches](../protected_branches.md) you wish to mirror on both
remotes to prevent conflicts caused by rewriting history.
Bidirectional mirroring also creates a race condition where commits made close together to the same
branch causes conflicts. The race condition can be mitigated by reducing the mirroring delay by using
a [Push event webhook](../integrations/webhooks.md#push-events) to trigger an immediate
pull to GitLab. Push mirroring from GitLab is rate limited to once per minute when only push mirroring
protected branches.
### Configure a webhook to trigger an immediate pull to GitLab
Assuming you have already configured the [push](#set-up-a-push-mirror-to-another-gitlab-instance-with-2fa-activated)
and [pull](#pull-from-a-remote-repository) mirrors in the upstream GitLab instance, to trigger an
immediate pull as suggested above, you must configure a [Push Event Web Hook](../integrations/webhooks.md#push-events)
in the downstream instance.
To do this:
1. Create a [personal access token](../../profile/personal_access_tokens.md) with `API` scope.
1. In your project, go to **Settings > Webhooks**.
1. Add the webhook URL which (in this case) uses the [Pull Mirror API](../../../api/projects.md#start-the-pull-mirroring-process-for-a-project)
request to trigger an immediate pull after updates to the repository.
```plaintext
https://gitlab.example.com/api/v4/projects/:id/mirror/pull?private_token=<your_access_token>
```
1. Ensure the **Push Events** checkbox is selected.
1. Select **Add Webhook** to save the webhook.
To test the integration, select the **Test** button and confirm GitLab doesn't return an error message.
### Prevent conflicts using a pre-receive hook
WARNING:
The solution proposed negatively affects the performance of
Git push operations because they are proxied to the upstream Git
repository.
A server-side `pre-receive` hook can be used to prevent the race condition
described above by only accepting the push after first pushing the commit to
the upstream Git repository. In this configuration one Git repository acts as
the authoritative upstream, and the other as downstream. The `pre-receive` hook
is installed on the downstream repository.
Read about [configuring Server hooks](../../../administration/server_hooks.md) on the GitLab server.
A sample `pre-receive` hook is provided below.
```shell
#!/usr/bin/env bash
# --- Assume only one push mirror target
# Push mirroring remotes are named `remote_mirror_<id>`, this finds the first remote and uses that.
TARGET_REPO=$(git remote | grep -m 1 remote_mirror)
proxy_push()
{
# --- Arguments
OLDREV=$(git rev-parse $1)
NEWREV=$(git rev-parse $2)
REFNAME="$3"
# --- Pattern of branches to proxy pushes
allowlist=$(expr "$branch" : "\(master\)")
case "$refname" in
refs/heads/*)
branch=$(expr "$refname" : "refs/heads/\(.*\)")
if [ "$allowlist" = "$branch" ]; then
unset GIT_QUARANTINE_PATH # handle https://git-scm.com/docs/git-receive-pack#_quarantine_environment
error="$(git push --quiet $TARGET_REPO $NEWREV:$REFNAME 2>&1)"
fail=$?
if [ "$fail" != "0" ]; then
echo >&2 ""
echo >&2 " Error: updates were rejected by upstream server"
echo >&2 " This is usually caused by another repository pushing changes"
echo >&2 " to the same ref. You may want to first integrate remote changes"
echo >&2 ""
return
fi
fi
;;
esac
}
# Allow dual mode: run from the command line just like the update hook, or
# if no arguments are given then run as a hook script
if [ -n "$1" -a -n "$2" -a -n "$3" ]; then
# Output to the terminal in command line mode - if someone wanted to
# resend an email; they could redirect the output to sendmail
# themselves
PAGER= proxy_push $2 $3 $1
else
# Push is proxied upstream one ref at a time. Because of this it is possible
# for some refs to succeed, and others to fail. This will result in a failed
# push.
while read oldrev newrev refname
do
proxy_push $oldrev $newrev $refname
done
fi
```
Note that this sample has a few limitations:
- This example may not work verbatim for your use case and might need modification.
- It doesn't regard different types of authentication mechanisms for the mirror.
- It doesn't work with forced updates (rewriting history).
- Only branches that match the `allowlist` patterns are proxy pushed.
- The script circumvents the Git hook quarantine environment because the update of `$TARGET_REPO`
is seen as a ref update, and Git displays warnings about it.
### Mirror with Perforce Helix via Git Fusion **(PREMIUM)**
> Moved to GitLab Premium in 13.9.
WARNING:
Bidirectional mirroring should not be used as a permanent configuration. Refer to
[Migrating from Perforce Helix](../import/perforce.md) for alternative migration approaches.
[Git Fusion](https://www.perforce.com/manuals/git-fusion/#Git-Fusion/section_avy_hyc_gl.html) provides a Git interface
to [Perforce Helix](https://www.perforce.com/products) which can be used by GitLab to bidirectionally
mirror projects with GitLab. This can help you in some situations when migrating from Perforce Helix
to GitLab where overlapping Perforce Helix workspaces cannot be migrated simultaneously to GitLab.
If using mirroring with Perforce Helix, you should only mirror protected branches. Perforce Helix
rejects any pushes that rewrite history. Only the fewest number of branches should be mirrored
due to the performance limitations of Git Fusion.
When configuring mirroring with Perforce Helix via Git Fusion, the following Git Fusion
settings are recommended:
- `change-pusher` should be disabled. Otherwise, every commit is rewritten as being committed
by the mirroring account, rather than being mapped to existing Perforce Helix users or the `unknown_git` user.
- `unknown_git` user is used as the commit author if the GitLab user doesn't exist in
Perforce Helix.
Read about [Git Fusion settings on Perforce.com](https://www.perforce.com/manuals/git-fusion/Content/Git-Fusion/section_vss_bdw_w3.html#section_zdp_zz1_3l).
## Troubleshooting
Should an error occur during a push, GitLab displays an **Error** highlight for that repository. Details on the error can then be seen by hovering over the highlight text.
......
doc/user/project/repository/mirror/pull.md
View file @ 3f9abf64
---
stage: Create
group: Source Code
info: To determine the technical writer assigned to the Stage/Group associated with this page, see https://about.gitlab.com/handbook/engineering/ux/technical-writing/#assignments
disqus_identifier: 'https://docs.gitlab.com/ee/workflow/repository_mirroring.html'
---
# Pull from a remote repository **(PREMIUM)**
> - [Added Git LFS support](https://gitlab.com/gitlab-org/gitlab/-/issues/10871) in GitLab 11.11.
> - Moved to GitLab Premium in 13.9.
You can set up a repository to automatically have its branches, tags, and commits updated from an
upstream repository.
If a repository you're interested in is located on a different server, and you want
to browse its content and its activity using the GitLab interface, you can configure
mirror pulling:
1. If your remote repository is on GitHub and you have
[two-factor authentication (2FA) configured](https://docs.github.com/en/github/authenticating-to-github/securing-your-account-with-two-factor-authentication-2fa),
create a [personal access token for GitHub](https://docs.github.com/en/github/authenticating-to-github/keeping-your-account-and-data-secure/creating-a-personal-access-token).
with the `repo` scope. If 2FA is enabled, this personal access
token serves as your GitHub password.
1. In your project, go to **Settings > Repository**, and then expand the
**Mirroring repositories** section.
1. In the **Git repository URL** field, enter a repository URL. Include the username
in the URL if required: `https://MYUSERNAME@github.com/group/PROJECTNAME.git`
1. In the **Mirror direction** dropdown, select **Pull**.
1. In the **Authentication method** dropdown, select your authentication method.
1. Select from the following checkboxes, if needed:
- **Overwrite diverged branches**
- **Trigger pipelines for mirror updates**
- **Only mirror protected branches**
1. Select **Mirror repository** to save the configuration.
Because GitLab is now set to pull changes from the upstream repository, you should not push commits
directly to the repository on GitLab. Instead, any commits should be pushed to the remote repository.
Changes pushed to the remote repository are pulled into the GitLab repository, either:
- Automatically in a certain period of time.
- When a [forced update](#force-an-update) is initiated.
WARNING:
If you do manually update a branch in the GitLab repository, the branch becomes diverged from
upstream, and GitLab no longer automatically updates this branch to prevent any changes from being lost.
Deleted branches and tags in the upstream repository are not reflected in the GitLab repository.
## How it works
After the pull mirroring feature has been enabled for a repository, the repository is added to a queue.
Once per minute, a Sidekiq cron job schedules repository mirrors to update, based on:
- The capacity available. This is determined by Sidekiq settings. For GitLab.com, see [GitLab.com Sidekiq settings](../../gitlab_com/index.md#sidekiq).
- The number of repository mirrors already in the queue that are due to be updated. Being due depends on when the repository mirror was last updated and how many times it's been retried.
Repository mirrors are updated as Sidekiq becomes available to process them. If the process of updating the repository mirror:
- **Succeeds**: An update is enqueued again with at least a 30 minute wait.
- **Fails**: (For example, a branch diverged from upstream.), The update attempted again later. Mirrors can fail
up to 14 times before they are no longer enqueued for updates.
## Overwrite diverged branches
> Moved to GitLab Premium in 13.9.
You can choose to always update your local branches with remote versions, even if they have
diverged from the remote.
WARNING:
For mirrored branches, enabling this option results in the loss of local changes.
To use this option, check the **Overwrite diverged branches** box when creating a repository mirror.
## Trigger pipelines for mirror updates
> Moved to GitLab Premium in 13.9.
If this option is enabled, pipelines trigger when branches or tags are
updated from the remote repository. Depending on the activity of the remote
repository, this may greatly increase the load on your CI runners. Only enable
this if you know they can handle the load. CI uses the credentials
assigned when you set up pull mirroring.
## Hard failure
> Moved to GitLab Premium in 13.9.
After 14 consecutive unsuccessful retries, the mirroring process is marked as a hard failure
and mirroring attempts stop. This failure is visible in either the:
- Project's main dashboard.
- Pull mirror settings page.
You can resume the project mirroring again by [forcing an update](#force-an-update).
## Trigger an update using the API
> Moved to GitLab Premium in 13.9.
Pull mirroring uses polling to detect new branches and commits added upstream, often minutes
afterwards. If you notify GitLab by [API](../../../api/projects.md#start-the-pull-mirroring-process-for-a-project),
updates are pulled immediately.
For more information, see [Start the pull mirroring process for a Project](../../../api/projects.md#start-the-pull-mirroring-process-for-a-project).
doc/user/project/repository/mirror/push.md
View file @ 3f9abf64
---
stage: Create
group: Source Code
info: To determine the technical writer assigned to the Stage/Group associated with this page, see https://about.gitlab.com/handbook/engineering/ux/technical-writing/#assignments
disqus_identifier: 'https://docs.gitlab.com/ee/workflow/repository_mirroring.html'
---
# Push to a remote repository
> [Introduced](https://gitlab.com/gitlab-org/gitlab/-/merge_requests/40137) in GitLab 13.5: LFS support over HTTPS.
For an existing project, you can set up push mirroring as follows:
1. In your project, go to **Settings > Repository**, and then expand the **Mirroring repositories** section.
1. Enter a repository URL.
1. In the **Mirror direction** dropdown, select **Push**.
1. Select an authentication method from the **Authentication method** dropdown.
You can authenticate with either a password or an [SSH key](#ssh-authentication).
1. Select the **Only mirror protected branches** checkbox, if necessary.
1. Select the **Keep divergent refs** checkbox, if desired.
1. Select **Mirror repository** to save the configuration.
When push mirroring is enabled, only push commits directly to the mirrored repository to prevent the
mirror diverging.
Unlike [pull mirroring](#how-it-works), the mirrored repository is not periodically auto-synced.
The mirrored repository receives all changes only when:
- Commits are pushed to GitLab.
- A [forced update](#force-an-update) is initiated.
Changes pushed to files in the repository are automatically pushed to the remote mirror at least:
- Within five minutes of being received.
- Within one minute if **Only mirror protected branches** is enabled.
In the case of a diverged branch, an error displays in the **Mirroring repositories**
section.
## Configure push mirrors through the API
You can also create and modify project push mirrors through the
[remote mirrors API](../../../api/remote_mirrors.md).
## Keep divergent refs
> [Introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/208828) in GitLab 13.0.
By default, if any ref (branch or tag) on the remote mirror has diverged from the local repository, the local differences are forced to the remote.
For example, if a repository has `main` and `develop` branches that
have been mirrored to a remote, and then a new commit is added to `develop` on
the remote mirror. The next push updates all of the references on the remote mirror to match
the local repository, and the new commit added to the remote `develop` branch is lost.
With the **Keep divergent refs** option enabled, the `develop` branch is
skipped, causing only `main` to be updated. The mirror status
reflects that `develop` has diverged and was skipped, and be marked as a
failed update. Refs that exist in the mirror repository but not in the local
repository are left untouched.
NOTE:
After the mirror is created, this option can only be modified via the [API](../../../api/remote_mirrors.md).
## Set up a push mirror from GitLab to GitHub
To set up a mirror from GitLab to GitHub, you must follow these steps:
1. Create a [GitHub personal access token](https://docs.github.com/en/github/authenticating-to-github/keeping-your-account-and-data-secure/creating-a-personal-access-token) with the `public_repo` box checked.
1. Fill in the **Git repository URL** field using this format: `https://<your_github_username>@github.com/<your_github_group>/<your_github_project>.git`.
1. Fill in **Password** field with your GitHub personal access token.
1. Select **Mirror repository**.
The mirrored repository is listed. For example, `https://*****:*****@github.com/<your_github_group>/<your_github_project>.git`.
The repository pushes shortly thereafter. To force a push, select the **Update now** (**{retry}**) button.
## Set up a push mirror from GitLab to AWS CodeCommit
AWS CodeCommit push mirroring is the best way to connect GitLab repositories to
AWS CodePipeline, as GitLab isn't yet supported as one of their Source Code Management (SCM) providers.
Each new AWS CodePipeline needs significant AWS infrastructure setup. It also
requires an individual pipeline per branch.
If AWS CodeDeploy is the final step of a CodePipeline, you can, instead, leverage
GitLab CI/CD pipelines and use the AWS CLI in the final job in `.gitlab-ci.yml`
to deploy to CodeDeploy.
NOTE:
GitLab-to-AWS-CodeCommit push mirroring cannot use SSH authentication until [GitLab issue 34014](https://gitlab.com/gitlab-org/gitlab/-/issues/34014) is resolved.
To set up a mirror from GitLab to AWS CodeCommit:
1. In the AWS IAM console, create an IAM user.
1. Add the following least privileges permissions for repository mirroring as an "inline policy".
The Amazon Resource Names (ARNs) must explicitly include the region and account. The IAM policy
below grants privilege for mirroring access to two sample repositories. These permissions have
been tested to be the minimum (least privileged) required for mirroring:
```json
{
"Version": "2012-10-17",
"Statement": [
{
"Sid": "MinimumGitLabPushMirroringPermissions",
"Effect": "Allow",
"Action": [
"codecommit:GitPull",
"codecommit:GitPush"
],
"Resource": [
"arn:aws:codecommit:us-east-1:111111111111:MyDestinationRepo",
"arn:aws:codecommit:us-east-1:111111111111:MyDemo*"
]
}
]
}
```
1. After the user was created, select the AWS IAM user name.
1. Select the **Security credentials** tab.
1. Under **HTTPS Git credentials for AWS CodeCommit** select **Generate credentials**.
NOTE:
This Git user ID and password is specific to communicating with CodeCommit. Do
not confuse it with the IAM user ID or AWS keys of this user.
1. Copy or download special Git HTTPS user ID and password.
1. In the AWS CodeCommit console, create a new repository to mirror from your GitLab repository.
1. Open your new repository, and then select **Clone URL > Clone HTTPS** (not **Clone HTTPS (GRC)**).
1. In GitLab, open the repository to be push-mirrored.
1. Go to **Settings > Repository**, and then expand **Mirroring repositories**.
1. Fill in the **Git repository URL** field using this format:
```plaintext
https://<your_aws_git_userid>@git-codecommit.<aws-region>.amazonaws.com/v1/repos/<your_codecommit_repo>
```
Replace `<your_aws_git_userid>` with the AWS **special HTTPS Git user ID** from the IAM Git
credentials created earlier. Replace `<your_codecommit_repo>` with the name of your repository in CodeCommit.
1. For **Mirror direction**, select **Push**.
1. For **Authentication method**, select **Password** and fill in the **Password** field with the special IAM Git clone user ID **password** created earlier in AWS.
1. The option **Only mirror protected branches** should be good for CodeCommit as it pushes more
frequently (from every five minutes to every minute).
CodePipeline requires individual pipeline setups for named branches you wish to have a AWS CI setup for. Because feature branches that have dynamic names are unsupported, configuring **Only mirror protected branches** doesn't cause flexibility problems with CodePipeline integration as long as you are also willing to protect all the named branches you want to build CodePipelines for.
1. Select **Mirror repository**. You should see the mirrored repository appear:
```plaintext
https://*****:*****@git-codecommit.<aws-region>.amazonaws.com/v1/repos/<your_codecommit_repo>
```
To test mirroring by forcing a push, select the half-circle arrows button (hover text is **Update now**).
If **Last successful update** shows a date, you have configured mirroring correctly.
If it isn't working correctly, a red `error` tag appears and shows the error message as hover text.
## Set up a push mirror to another GitLab instance with 2FA activated
1. On the destination GitLab instance, create a [personal access token](../../profile/personal_access_tokens.md) with `write_repository` scope.
1. On the source GitLab instance:
1. Fill in the **Git repository URL** field using this format: `https://oauth2@<destination host>/<your_gitlab_group_or_name>/<your_gitlab_project>.git`.
1. Fill in the **Password** field with the GitLab personal access token created on the destination GitLab instance.
1. Select **Mirror repository**.
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7