Merge branch 'installation-update-guides' into 'master'

Installation and update guides for 7.14

cc @rspeicher

See merge request !1168

doc/install/installation.md

@@ -195,9 +195,9 @@ We recommend using a PostgreSQL database. For MySQL check [MySQL setup guide](da
 ### Clone the Source
 
     # Clone GitLab repository
-    sudo -u git -H git clone https://gitlab.com/gitlab-org/gitlab-ce.git -b 7-13-stable gitlab
+    sudo -u git -H git clone https://gitlab.com/gitlab-org/gitlab-ce.git -b 7-14-stable gitlab
 
-**Note:** You can change `7-13-stable` to `master` if you want the *bleeding edge* version, but never install master on a production server!
+**Note:** You can change `7-14-stable` to `master` if you want the *bleeding edge* version, but never install master on a production server!
 
 ### Configure It
 

doc/update/6.x-or-7.x-to-7.13.md → doc/update/6.x-or-7.x-to-7.14.md

-# From 6.x or 7.x to 7.13
-*Make sure you view this [upgrade guide from the `master` branch](../../../master/doc/update/6.x-or-7.x-to-7.13.md) for the most up to date instructions.*
+# From 6.x or 7.x to 7.14
+*Make sure you view this [upgrade guide from the `master` branch](../../../master/doc/update/6.x-or-7.x-to-7.14.md) for the most up to date instructions.*
 
-This allows you to upgrade any version of GitLab from 6.0 and up (including 7.0 and up) to 7.13.
+This allows you to upgrade any version of GitLab from 6.0 and up (including 7.0 and up) to 7.14.
 
 ## Global issue numbers
 
@@ -71,7 +71,7 @@ sudo -u git -H git checkout -- db/schema.rb # local changes will be restored aut
 For GitLab Community Edition:
 
 ```bash
-sudo -u git -H git checkout 7-13-stable
+sudo -u git -H git checkout 7-14-stable
 ```
 
 OR
@@ -79,7 +79,7 @@ OR
 For GitLab Enterprise Edition:
 
 ```bash
-sudo -u git -H git checkout 7-13-stable-ee
+sudo -u git -H git checkout 7-14-stable-ee
 ```
 
 ## 4. Install additional packages
@@ -127,7 +127,7 @@ sudo apt-get install nodejs
 ```bash
 cd /home/git/gitlab-shell
 sudo -u git -H git fetch
-sudo -u git -H git checkout v2.6.3
+sudo -u git -H git checkout v2.6.4
 ```
 
 ## 7. Install libs, migrations, etc.
@@ -162,11 +162,11 @@ sudo cp lib/support/init.d/gitlab /etc/init.d/gitlab
 TIP: to see what changed in `gitlab.yml.example` in this release use next command:
 
 ```
-git diff 6-0-stable:config/gitlab.yml.example 7-13-stable:config/gitlab.yml.example
+git diff 6-0-stable:config/gitlab.yml.example 7.14-stable:config/gitlab.yml.example
 ```
 
-* Make `/home/git/gitlab/config/gitlab.yml` the same as https://gitlab.com/gitlab-org/gitlab-ce/blob/7-13-stable/config/gitlab.yml.example but with your settings.
-* Make `/home/git/gitlab/config/unicorn.rb` the same as https://gitlab.com/gitlab-org/gitlab-ce/blob/7-13-stable/config/unicorn.rb.example but with your settings.
+* Make `/home/git/gitlab/config/gitlab.yml` the same as https://gitlab.com/gitlab-org/gitlab-ce/blob/7-14-stable/config/gitlab.yml.example but with your settings.
+* Make `/home/git/gitlab/config/unicorn.rb` the same as https://gitlab.com/gitlab-org/gitlab-ce/blob/7-14-stable/config/unicorn.rb.example but with your settings.
 * Make `/home/git/gitlab-shell/config.yml` the same as https://gitlab.com/gitlab-org/gitlab-shell/blob/v2.6.0/config.yml.example but with your settings.
 * Copy rack attack middleware config
 
@@ -182,14 +182,14 @@ sudo cp lib/support/logrotate/gitlab /etc/logrotate.d/gitlab
 
 ### Change Nginx settings
 
-* HTTP setups: Make `/etc/nginx/sites-available/gitlab` the same as https://gitlab.com/gitlab-org/gitlab-ce/blob/7-13-stable/lib/support/nginx/gitlab but with your settings.
-* HTTPS setups: Make `/etc/nginx/sites-available/gitlab-ssl` the same as https://gitlab.com/gitlab-org/gitlab-ce/blob/7-13-stable/lib/support/nginx/gitlab-ssl but with your settings.
+* HTTP setups: Make `/etc/nginx/sites-available/gitlab` the same as https://gitlab.com/gitlab-org/gitlab-ce/blob/7-14-stable/lib/support/nginx/gitlab but with your settings.
+* HTTPS setups: Make `/etc/nginx/sites-available/gitlab-ssl` the same as https://gitlab.com/gitlab-org/gitlab-ce/blob/7-14-stable/lib/support/nginx/gitlab-ssl but with your settings.
 * A new `location /uploads/` section has been added that needs to have the same content as the existing `location @gitlab` section.
 
 ### Check the version of /usr/local/bin/git
 
 If you installed Git from source into /usr/local/bin/git then please [check
-your version](7.12-to-7.13.md).
+your version](7.13-to-7.14.md).
 
 ## 9. Start application
 

doc/update/7.13-to-7.14.md

+# From 7.13 to 7.14
+
+### 0. Double-check your Git version
+
+**This notice applies only to /usr/local/bin/git**
+
+If you compiled Git from source on your GitLab server then please double-check
+that you are using a version that protects against CVE-2014-9390. For six
+months after this vulnerability became known the GitLab installation guide
+still contained instructions that would install the outdated, 'vulnerable' Git
+version 2.1.2.
+
+Run the following command to get your current Git version.
+
+```
+/usr/local/bin/git --version
+```
+
+If you see 'No such file or directory' then you did not install Git according
+to the outdated instructions from the GitLab installation guide and you can go
+to the next step 'Stop server' below.
+
+If you see a version string then it should be v1.8.5.6, v1.9.5, v2.0.5, v2.1.4,
+v2.2.1 or newer. You can use the [instructions in the GitLab source
+installation
+guide](https://gitlab.com/gitlab-org/gitlab-ce/blob/master/doc/install/installation.md#1-packages-dependencies)
+to install a newer version of Git.
+
+### 1. Stop server
+
+    sudo service gitlab stop
+
+### 2. Backup
+
+```bash
+cd /home/git/gitlab
+sudo -u git -H bundle exec rake gitlab:backup:create RAILS_ENV=production
+```
+
+### 3. Get latest code
+
+```bash
+sudo -u git -H git fetch --all
+sudo -u git -H git checkout -- db/schema.rb # local changes will be restored automatically
+```
+
+For GitLab Community Edition:
+
+```bash
+sudo -u git -H git checkout 7-14-stable
+```
+
+OR
+
+For GitLab Enterprise Edition:
+
+```bash
+sudo -u git -H git checkout 7-14-stable-ee
+```
+
+### 4. Update gitlab-shell
+
+```bash
+cd /home/git/gitlab-shell
+sudo -u git -H git fetch
+sudo -u git -H git checkout v2.6.4
+```
+
+### 5. Install libs, migrations, etc.
+
+```bash
+cd /home/git/gitlab
+
+# MySQL installations (note: the line below states '--without ... postgres')
+sudo -u git -H bundle install --without development test postgres --deployment
+
+# PostgreSQL installations (note: the line below states '--without ... mysql')
+sudo -u git -H bundle install --without development test mysql --deployment
+
+# Run database migrations
+sudo -u git -H bundle exec rake db:migrate RAILS_ENV=production
+
+# Clean up assets and cache
+sudo -u git -H bundle exec rake assets:clean assets:precompile cache:clear RAILS_ENV=production
+
+# Update init.d script
+sudo cp lib/support/init.d/gitlab /etc/init.d/gitlab
+```
+
+### 6. Update config files
+
+#### New configuration options for `gitlab.yml`
+
+There are new configuration options available for [`gitlab.yml`](config/gitlab.yml.example). View them with the command below and apply them to your current `gitlab.yml`.
+
+```
+git diff origin/7-13-stable:config/gitlab.yml.example origin/7-14-stable:config/gitlab.yml.example
+``````
+
+### 7. Start application
+
+    sudo service gitlab start
+    sudo service nginx restart
+
+### 8. Check application status
+
+Check if GitLab and its environment are configured correctly:
+
+    sudo -u git -H bundle exec rake gitlab:env:info RAILS_ENV=production
+
+To make sure you didn't miss anything run a more thorough check with:
+
+    sudo -u git -H bundle exec rake gitlab:check RAILS_ENV=production
+
+If all items are green, then congratulations, the upgrade is complete!
+
+## Things went south? Revert to previous version (7.13)
+
+### 1. Revert the code to the previous version
+Follow the [upgrade guide from 7.12 to 7.13](7.12-to-7.13.md), except for the database migration
+(The backup is already migrated to the previous version)
+
+### 2. Restore from the backup:
+
+```bash
+cd /home/git/gitlab
+sudo -u git -H bundle exec rake gitlab:backup:restore RAILS_ENV=production
+```
+If you have more than one backup *.tar file(s) please add `BACKUP=timestamp_of_backup` to the command above.