Commit b569e76c authored by Achilleas Pipinellis's avatar Achilleas Pipinellis

Merge branch 'docs/fix-lists-surrounded-by-new-lines' into 'master'

Ensure all lists are surrounded by new lines

See merge request gitlab-org/gitlab-ce!25479
parents 0152d6ff eb866309
...@@ -51,7 +51,7 @@ Authentiq will generate a Client ID and the accompanying Client Secret for you t ...@@ -51,7 +51,7 @@ Authentiq will generate a Client ID and the accompanying Client Secret for you t
``` ```
1. The `scope` is set to request the user's name, email (required and signed), and permission to send push notifications to sign in on subsequent visits. 1. The `scope` is set to request the user's name, email (required and signed), and permission to send push notifications to sign in on subsequent visits.
See [OmniAuth Authentiq strategy](https://github.com/AuthentiqID/omniauth-authentiq/wiki/Scopes,-callback-url-configuration-and-responses) for more information on scopes and modifiers. See [OmniAuth Authentiq strategy](https://github.com/AuthentiqID/omniauth-authentiq/wiki/Scopes,-callback-url-configuration-and-responses) for more information on scopes and modifiers.
1. Change `YOUR_CLIENT_ID` and `YOUR_CLIENT_SECRET` to the Client credentials you received in step 1. 1. Change `YOUR_CLIENT_ID` and `YOUR_CLIENT_SECRET` to the Client credentials you received in step 1.
......
...@@ -451,7 +451,7 @@ ldapsearch -H ldaps://$host:$port -D "$bind_dn" -y bind_dn_password.txt -b "$ba ...@@ -451,7 +451,7 @@ ldapsearch -H ldaps://$host:$port -D "$bind_dn" -y bind_dn_password.txt -b "$ba
### Invalid credentials when logging in ### Invalid credentials when logging in
- Make sure the user you are binding with has enough permissions to read the user's - Make sure the user you are binding with has enough permissions to read the user's
tree and traverse it. tree and traverse it.
- Check that the `user_filter` is not blocking otherwise valid users. - Check that the `user_filter` is not blocking otherwise valid users.
- Run the following check command to make sure that the LDAP settings are - Run the following check command to make sure that the LDAP settings are
correct and GitLab can see your users: correct and GitLab can see your users:
......
...@@ -34,7 +34,7 @@ Test Connection to ensure the configuration is correct. ...@@ -34,7 +34,7 @@ Test Connection to ensure the configuration is correct.
- **Default**: Checked - **Default**: Checked
- **Type**: InfluxDB 0.9.x (Even if you're using InfluxDB 0.10.x) - **Type**: InfluxDB 0.9.x (Even if you're using InfluxDB 0.10.x)
- **Url**: `https://localhost:8086` (Or the remote URL if you've installed InfluxDB - **Url**: `https://localhost:8086` (Or the remote URL if you've installed InfluxDB
on a separate server) on a separate server)
- **Access**: proxy - **Access**: proxy
- **Database**: gitlab - **Database**: gitlab
- **User**: admin (Or the username configured when setting up InfluxDB) - **User**: admin (Or the username configured when setting up InfluxDB)
......
...@@ -10,11 +10,11 @@ It allows you to see (from left to right): ...@@ -10,11 +10,11 @@ It allows you to see (from left to right):
- the current host serving the page - the current host serving the page
- the timing of the page (backend, frontend) - the timing of the page (backend, frontend)
- time taken and number of DB queries, click through for details of these queries - time taken and number of DB queries, click through for details of these queries
![SQL profiling using the Performance Bar](img/performance_bar_sql_queries.png) ![SQL profiling using the Performance Bar](img/performance_bar_sql_queries.png)
- time taken and number of [Gitaly] calls, click through for details of these calls - time taken and number of [Gitaly] calls, click through for details of these calls
![Gitaly profiling using the Performance Bar](img/performance_bar_gitaly_calls.png) ![Gitaly profiling using the Performance Bar](img/performance_bar_gitaly_calls.png)
- profile of the code used to generate the page, line by line. In the profile view, the numbers in the left panel represent wall time, cpu time, and number of calls (based on [rblineprof](https://github.com/tmm1/rblineprof)). - profile of the code used to generate the page, line by line. In the profile view, the numbers in the left panel represent wall time, cpu time, and number of calls (based on [rblineprof](https://github.com/tmm1/rblineprof)).
![Line profiling using the Performance Bar](img/performance_bar_line_profiling.png) ![Line profiling using the Performance Bar](img/performance_bar_line_profiling.png)
- time taken and number of calls to Redis - time taken and number of calls to Redis
- time taken and number of background jobs created by Sidekiq - time taken and number of background jobs created by Sidekiq
- time taken and number of Ruby GC calls - time taken and number of Ruby GC calls
......
...@@ -3,20 +3,20 @@ ...@@ -3,20 +3,20 @@
Keep your GitLab instance up and running smoothly. Keep your GitLab instance up and running smoothly.
- [Clean up Redis sessions](cleaning_up_redis_sessions.md): Prior to GitLab 7.3, - [Clean up Redis sessions](cleaning_up_redis_sessions.md): Prior to GitLab 7.3,
user sessions did not automatically expire from Redis. If user sessions did not automatically expire from Redis. If
you have been running a large GitLab server (thousands of users) since before you have been running a large GitLab server (thousands of users) since before
GitLab 7.3 we recommend cleaning up stale sessions to compact the Redis GitLab 7.3 we recommend cleaning up stale sessions to compact the Redis
database after you upgrade to GitLab 7.3. database after you upgrade to GitLab 7.3.
- [Moving repositories](moving_repositories.md): Moving all repositories managed - [Moving repositories](moving_repositories.md): Moving all repositories managed
by GitLab to another file system or another server. by GitLab to another file system or another server.
- [Sidekiq MemoryKiller](sidekiq_memory_killer.md): Configure Sidekiq MemoryKiller - [Sidekiq MemoryKiller](sidekiq_memory_killer.md): Configure Sidekiq MemoryKiller
to restart Sidekiq. to restart Sidekiq.
- [Unicorn](unicorn.md): Understand Unicorn and unicorn-worker-killer. - [Unicorn](unicorn.md): Understand Unicorn and unicorn-worker-killer.
- Speed up SSH operations by [Authorizing SSH users via a fast, - Speed up SSH operations by [Authorizing SSH users via a fast,
indexed lookup to the GitLab database](fast_ssh_key_lookup.md), and/or indexed lookup to the GitLab database](fast_ssh_key_lookup.md), and/or
by [doing away with user SSH keys stored on GitLab entirely in favor by [doing away with user SSH keys stored on GitLab entirely in favor
of SSH certificates](ssh_certificates.md). of SSH certificates](ssh_certificates.md).
- [Filesystem Performance Benchmarking](filesystem_benchmarking.md): Filesystem - [Filesystem Performance Benchmarking](filesystem_benchmarking.md): Filesystem
performance can have a big impact on GitLab performance, especially for actions performance can have a big impact on GitLab performance, especially for actions
that read or write Git repositories. This information will help benchmark that read or write Git repositories. This information will help benchmark
filesystem performance against known good and bad real-world systems. filesystem performance against known good and bad real-world systems.
...@@ -338,9 +338,9 @@ You may want to run GitLab Pages daemon on a separate server in order to decreas ...@@ -338,9 +338,9 @@ You may want to run GitLab Pages daemon on a separate server in order to decreas
Follow the steps below to configure GitLab Pages in a separate server. Follow the steps below to configure GitLab Pages in a separate server.
1. Suppose you have the main GitLab application server named `app1`. Prepare 1. Suppose you have the main GitLab application server named `app1`. Prepare
new Linux server (let's call it `app2`), create NFS share there and configure access to new Linux server (let's call it `app2`), create NFS share there and configure access to
this share from `app1`. Let's use the default GitLab Pages folder `/var/opt/gitlab/gitlab-rails/shared/pages` this share from `app1`. Let's use the default GitLab Pages folder `/var/opt/gitlab/gitlab-rails/shared/pages`
as the shared folder on `app2` and mount it to `/mnt/pages` on `app1`. as the shared folder on `app2` and mount it to `/mnt/pages` on `app1`.
1. On `app2` install GitLab omnibus and modify `/etc/gitlab/gitlab.rb` this way: 1. On `app2` install GitLab omnibus and modify `/etc/gitlab/gitlab.rb` this way:
......
...@@ -88,12 +88,13 @@ since that is needed in all configurations. ...@@ -88,12 +88,13 @@ since that is needed in all configurations.
### Wildcard domains ### Wildcard domains
>**Requirements:** **Requirements:**
> - [Wildcard DNS setup](#dns-configuration)
> - [Wildcard DNS setup](#dns-configuration)
> ---
> ---
> URL scheme: `http://page.example.io`
URL scheme: `http://page.example.io`
This is the minimum setup that you can use Pages with. It is the base for all This is the minimum setup that you can use Pages with. It is the base for all
other setups as described below. Nginx will proxy all requests to the daemon. other setups as described below. Nginx will proxy all requests to the daemon.
......
...@@ -10,15 +10,15 @@ say that issue notes poll every 2 seconds, and issue titles poll every 5 ...@@ -10,15 +10,15 @@ say that issue notes poll every 2 seconds, and issue titles poll every 5
seconds; these are _not_ the actual values. seconds; these are _not_ the actual values.
- 1 is the default, and recommended for most installations. (Issue notes poll - 1 is the default, and recommended for most installations. (Issue notes poll
every 2 seconds, and issue titles poll every 5 seconds.) every 2 seconds, and issue titles poll every 5 seconds.)
- 0 will disable UI polling completely. (On the next poll, clients will stop - 0 will disable UI polling completely. (On the next poll, clients will stop
polling for updates.) polling for updates.)
- A value greater than 1 will slow polling down. If you see issues with - A value greater than 1 will slow polling down. If you see issues with
database load from lots of clients polling for updates, increasing the database load from lots of clients polling for updates, increasing the
multiplier from 1 can be a good compromise, rather than disabling polling multiplier from 1 can be a good compromise, rather than disabling polling
completely. (For example: If this is set to 2, then issue notes poll every 4 completely. (For example: If this is set to 2, then issue notes poll every 4
seconds, and issue titles poll every 10 seconds.) seconds, and issue titles poll every 10 seconds.)
- A value between 0 and 1 will make the UI poll more frequently (so updates - A value between 0 and 1 will make the UI poll more frequently (so updates
will show in other sessions faster), but is **not recommended**. 1 should be will show in other sessions faster), but is **not recommended**. 1 should be
fast enough. (For example, if this is set to 0.5, then issue notes poll every fast enough. (For example, if this is set to 0.5, then issue notes poll every
1 second, and issue titles poll every 2.5 seconds.) 1 second, and issue titles poll every 2.5 seconds.)
...@@ -60,6 +60,7 @@ Runs the following rake tasks: ...@@ -60,6 +60,7 @@ Runs the following rake tasks:
It will check that each component was set up according to the installation guide and suggest fixes for issues found. It will check that each component was set up according to the installation guide and suggest fixes for issues found.
You may also have a look at our Troubleshooting Guides: You may also have a look at our Troubleshooting Guides:
- [Troubleshooting Guide (GitLab)](http://docs.gitlab.com/ee/README.html#troubleshooting) - [Troubleshooting Guide (GitLab)](http://docs.gitlab.com/ee/README.html#troubleshooting)
- [Troubleshooting Guide (Omnibus Gitlab)](http://docs.gitlab.com/omnibus/README.html#troubleshooting) - [Troubleshooting Guide (Omnibus Gitlab)](http://docs.gitlab.com/omnibus/README.html#troubleshooting)
......
...@@ -171,6 +171,7 @@ Parameters: ...@@ -171,6 +171,7 @@ Parameters:
If the commit fails for any reason we return a 400 error with a non-specific If the commit fails for any reason we return a 400 error with a non-specific
error message. Possible causes for a failed commit include: error message. Possible causes for a failed commit include:
- the `file_path` contained `/../` (attempted directory traversal); - the `file_path` contained `/../` (attempted directory traversal);
- the new file contents were identical to the current file contents, i.e. the - the new file contents were identical to the current file contents, i.e. the
user tried to make an empty commit; user tried to make an empty commit;
......
...@@ -75,7 +75,7 @@ When we call `mix` command, we'll pass two arguments: ...@@ -75,7 +75,7 @@ When we call `mix` command, we'll pass two arguments:
- The task we want it to run: `phoenix.new` - The task we want it to run: `phoenix.new`
- And the parameter `phoenix.new` requires, which is the name of the new project. In this case, - And the parameter `phoenix.new` requires, which is the name of the new project. In this case,
we're calling it `hello_gitlab_ci`, but you're free to set your own name: we're calling it `hello_gitlab_ci`, but you're free to set your own name:
```bash ```bash
mix phoenix.new hello_gitlab_ci mix phoenix.new hello_gitlab_ci
...@@ -249,7 +249,7 @@ project. ...@@ -249,7 +249,7 @@ project.
![Set up CI](img/setup-ci.png) ![Set up CI](img/setup-ci.png)
- On next screen, we can select a template ready to go. Click on **Apply a GitLab CI/CD Yaml - On next screen, we can select a template ready to go. Click on **Apply a GitLab CI/CD Yaml
template** and select **Elixir**: template** and select **Elixir**:
![Select template](img/select-template.png) ![Select template](img/select-template.png)
......
...@@ -106,10 +106,10 @@ flow, external contributors follow the following steps: ...@@ -106,10 +106,10 @@ flow, external contributors follow the following steps:
1. Fork a parent project. 1. Fork a parent project.
1. Create a merge request from the forked project that targets the `master` branch 1. Create a merge request from the forked project that targets the `master` branch
in the parent project. in the parent project.
1. A pipeline runs on the merge request. 1. A pipeline runs on the merge request.
1. A maintainer from the parent project checks the pipeline result, and merge 1. A maintainer from the parent project checks the pipeline result, and merge
into a target branch if the latest pipeline has passed. into a target branch if the latest pipeline has passed.
Currently, those pipelines are created in a **forked** project, not in the Currently, those pipelines are created in a **forked** project, not in the
parent project. This means you cannot completely trust the pipeline result, parent project. This means you cannot completely trust the pipeline result,
......
...@@ -115,16 +115,16 @@ Now, every time you create an MR for CE and EE: ...@@ -115,16 +115,16 @@ Now, every time you create an MR for CE and EE:
1. Continue cherry-picking: `git cherry-pick --continue` 1. Continue cherry-picking: `git cherry-pick --continue`
1. Push to EE: `git push origin branch-example-ee` 1. Push to EE: `git push origin branch-example-ee`
1. Create the EE-equivalent MR and link to the CE MR from the 1. Create the EE-equivalent MR and link to the CE MR from the
description "Ports [CE-MR-LINK] to EE" description "Ports [CE-MR-LINK] to EE"
1. Once all the jobs are passing in both CE and EE, you've addressed the 1. Once all the jobs are passing in both CE and EE, you've addressed the
feedback from your own team, and got them approved, the merge requests can be merged. feedback from your own team, and got them approved, the merge requests can be merged.
1. When both MRs are ready, the EE merge request will be merged first, and the 1. When both MRs are ready, the EE merge request will be merged first, and the
CE-equivalent will be merged next. CE-equivalent will be merged next.
**Important notes:** **Important notes:**
- The commit SHA can be easily found from the GitLab UI. From a merge request, - The commit SHA can be easily found from the GitLab UI. From a merge request,
open the tab **Commits** and click the copy icon to copy the commit SHA. open the tab **Commits** and click the copy icon to copy the commit SHA.
- To cherry-pick a **commit range**, such as [A > B > C > D] use: - To cherry-pick a **commit range**, such as [A > B > C > D] use:
```shell ```shell
...@@ -140,7 +140,7 @@ open the tab **Commits** and click the copy icon to copy the commit SHA. ...@@ -140,7 +140,7 @@ open the tab **Commits** and click the copy icon to copy the commit SHA.
``` ```
- To cherry-pick a **merge commit**, use the flag `-m 1`. For example, suppose that the - To cherry-pick a **merge commit**, use the flag `-m 1`. For example, suppose that the
merge commit SHA is `138f5e2f20289bb376caffa0303adb0cac859ce1`: merge commit SHA is `138f5e2f20289bb376caffa0303adb0cac859ce1`:
```shell ```shell
git cherry-pick -m 1 138f5e2f20289bb376caffa0303adb0cac859ce1 git cherry-pick -m 1 138f5e2f20289bb376caffa0303adb0cac859ce1
...@@ -163,12 +163,12 @@ merge commit SHA is `138f5e2f20289bb376caffa0303adb0cac859ce1`: ...@@ -163,12 +163,12 @@ merge commit SHA is `138f5e2f20289bb376caffa0303adb0cac859ce1`:
commits and you want to cherry-pick all but the merge commit. commits and you want to cherry-pick all but the merge commit.
- If you push more commits to the CE branch, you can safely repeat the procedure - If you push more commits to the CE branch, you can safely repeat the procedure
to cherry-pick them to the EE-equivalent branch. You can do that as many times as to cherry-pick them to the EE-equivalent branch. You can do that as many times as
necessary, using the same CE and EE branches. necessary, using the same CE and EE branches.
- If you submitted the merge request to the CE repo and the `ee-compat-check` job passed, - If you submitted the merge request to the CE repo and the `ee-compat-check` job passed,
you are not required to submit the EE-equivalent MR, but it's still recommended. If the you are not required to submit the EE-equivalent MR, but it's still recommended. If the
job failed, you are required to submit the EE MR so that you can fix the conflicts in EE job failed, you are required to submit the EE MR so that you can fix the conflicts in EE
before merging your changes into CE. before merging your changes into CE.
## FAQ ## FAQ
......
...@@ -199,7 +199,7 @@ different way. ...@@ -199,7 +199,7 @@ different way.
We add the ~"Accepting merge requests" label to: We add the ~"Accepting merge requests" label to:
- Low priority ~bug issues (i.e. we do not add it to the bugs that we want to - Low priority ~bug issues (i.e. we do not add it to the bugs that we want to
solve in the ~"Next Patch Release") solve in the ~"Next Patch Release")
- Small ~feature - Small ~feature
- Small ~"technical debt" issues - Small ~"technical debt" issues
...@@ -300,17 +300,17 @@ below will make it easy to manage this, without unnecessary overhead. ...@@ -300,17 +300,17 @@ below will make it easy to manage this, without unnecessary overhead.
1. Set weight for any issue at the earliest possible convenience 1. Set weight for any issue at the earliest possible convenience
1. If you don't agree with a set weight, discuss with other developers until 1. If you don't agree with a set weight, discuss with other developers until
consensus is reached about the weight consensus is reached about the weight
1. Issue weights are an abstract measurement of complexity of the issue. Do not 1. Issue weights are an abstract measurement of complexity of the issue. Do not
relate issue weight directly to time. This is called [anchoring](https://en.wikipedia.org/wiki/Anchoring) relate issue weight directly to time. This is called [anchoring](https://en.wikipedia.org/wiki/Anchoring)
and something you want to avoid. and something you want to avoid.
1. Something that has a weight of 1 (or no weight) is really small and simple. 1. Something that has a weight of 1 (or no weight) is really small and simple.
Something that is 9 is rewriting a large fundamental part of GitLab, Something that is 9 is rewriting a large fundamental part of GitLab,
which might lead to many hard problems to solve. Changing some text in GitLab which might lead to many hard problems to solve. Changing some text in GitLab
is probably 1, adding a new Git Hook maybe 4 or 5, big features 7-9. is probably 1, adding a new Git Hook maybe 4 or 5, big features 7-9.
1. If something is very large, it should probably be split up in multiple 1. If something is very large, it should probably be split up in multiple
issues or chunks. You can simply not set the weight of a parent issue and set issues or chunks. You can simply not set the weight of a parent issue and set
weights to children issues. weights to children issues.
## Regression issues ## Regression issues
......
...@@ -7,16 +7,16 @@ description: How to add docs for new or enhanced GitLab features. ...@@ -7,16 +7,16 @@ description: How to add docs for new or enhanced GitLab features.
At GitLab, developers contribute new or updated documentation along with their code, but product managers and technical writers also have essential roles in the process. At GitLab, developers contribute new or updated documentation along with their code, but product managers and technical writers also have essential roles in the process.
- **Developers**: Author/update documentation in the same MR as their code, and - **Developers**: Author/update documentation in the same MR as their code, and
merge it by the feature freeze for the assigned milestone. Request technical writer merge it by the feature freeze for the assigned milestone. Request technical writer
assistance if needed. Other developers typically act as reviewers. assistance if needed. Other developers typically act as reviewers.
- **Product Managers** (PMs): In the issue for all new and enhanced features, - **Product Managers** (PMs): In the issue for all new and enhanced features,
confirm the documentation requirements, plus the mentioned feature description confirm the documentation requirements, plus the mentioned feature description
and use cases, which can be reused in docs. They can bring in a technical and use cases, which can be reused in docs. They can bring in a technical
writer for discussion or collaboration, and can be called upon themselves as a doc reviewer. writer for discussion or collaboration, and can be called upon themselves as a doc reviewer.
- **Technical Writers**: Review doc requirements in issues, track issues and MRs - **Technical Writers**: Review doc requirements in issues, track issues and MRs
that contain docs changes, help with any questions throughout the authoring/editing process, that contain docs changes, help with any questions throughout the authoring/editing process,
work on special projects related to the documentation, and review all new and updated work on special projects related to the documentation, and review all new and updated
docs content, whether before or after it is merged. docs content, whether before or after it is merged.
Beyond this process, any member of the GitLab community can also author or request documentation Beyond this process, any member of the GitLab community can also author or request documentation
improvements that are not associated with a new or changed feature. See the [Documentation improvement workflow](improvement-workflow.md). improvements that are not associated with a new or changed feature. See the [Documentation improvement workflow](improvement-workflow.md).
...@@ -80,7 +80,7 @@ must: ...@@ -80,7 +80,7 @@ must:
- Add the `Documentation` label. - Add the `Documentation` label.
- Confirm or add the [documentation requirements](#documentation-requirements). - Confirm or add the [documentation requirements](#documentation-requirements).
- Ensure the issue contains any new or updated feature name, overview/description, - Ensure the issue contains any new or updated feature name, overview/description,
and use cases, as required per the [documentation structure and template](structure.md), when applicable. and use cases, as required per the [documentation structure and template](structure.md), when applicable.
Everyone is encouraged to draft the requirements in the issue, but a product manager will Everyone is encouraged to draft the requirements in the issue, but a product manager will
do the following: do the following:
...@@ -100,20 +100,20 @@ Follow the process below unless otherwise agreed with the product manager and te ...@@ -100,20 +100,20 @@ Follow the process below unless otherwise agreed with the product manager and te
- Include any new and edited docs in the MR introducing the code. - Include any new and edited docs in the MR introducing the code.
- Use the Documentation requirements confirmed by the Product Manager in the - Use the Documentation requirements confirmed by the Product Manager in the
issue and discuss any further doc plans or ideas as needed. issue and discuss any further doc plans or ideas as needed.
- If the new or changed doc requires extensive collaboration or conversation, a separate, - If the new or changed doc requires extensive collaboration or conversation, a separate,
linked issue can be used for the planning process. linked issue can be used for the planning process.
- We are trying to avoid using a separate MR, so that the docs stay with the code, but the - We are trying to avoid using a separate MR, so that the docs stay with the code, but the
Technical Writing team is interested in discussing any potential exceptions that may be suggested. Technical Writing team is interested in discussing any potential exceptions that may be suggested.
- Use the [Documentation guidelines](index.md), as well as other resources linked from there, - Use the [Documentation guidelines](index.md), as well as other resources linked from there,
including the Documentation [Structure and template](structure.md) page, [Style Guide](styleguide.md), and [Markdown Guide](https://about.gitlab.com/handbook/product/technical-writing/markdown-guide/). including the Documentation [Structure and template](structure.md) page, [Style Guide](styleguide.md), and [Markdown Guide](https://about.gitlab.com/handbook/product/technical-writing/markdown-guide/).
- If you need any help to choose the correct place for a doc, discuss a documentation - If you need any help to choose the correct place for a doc, discuss a documentation
idea or outline, or request any other help, ping the Technical Writer for the relevant idea or outline, or request any other help, ping the Technical Writer for the relevant
[DevOps stage](https://about.gitlab.com/handbook/product/categories/#devops-stages) [DevOps stage](https://about.gitlab.com/handbook/product/categories/#devops-stages)
in your issue or MR, or write within `#docs` on the GitLab Slack. in your issue or MR, or write within `#docs` on the GitLab Slack.
- The docs must be merged with the code **by the feature freeze date**, otherwise - The docs must be merged with the code **by the feature freeze date**, otherwise
the feature cannot be included with the release. A policy for documenting feature-flagged the feature cannot be included with the release. A policy for documenting feature-flagged
issues is forthcoming and you are welcome to join the [discussion](https://gitlab.com/gitlab-org/gitlab-ce/issues/56813). issues is forthcoming and you are welcome to join the [discussion](https://gitlab.com/gitlab-org/gitlab-ce/issues/56813).
#### Reviews and merging #### Reviews and merging
...@@ -124,35 +124,35 @@ All reviewers can help ensure accuracy, clarity, completeness, and adherence to ...@@ -124,35 +124,35 @@ All reviewers can help ensure accuracy, clarity, completeness, and adherence to
1. **The code reviewer** for the MR, to confirm accuracy, clarity, and completeness. 1. **The code reviewer** for the MR, to confirm accuracy, clarity, and completeness.
1. Optionally: Others involved in the work, such as other devs or the PM. 1. Optionally: Others involved in the work, such as other devs or the PM.
1. Optionally: The technical writer for the DevOps stage. If not prior to merging, the technical writer will review after the merge. 1. Optionally: The technical writer for the DevOps stage. If not prior to merging, the technical writer will review after the merge.
This helps us ensure that the developer has time to merge good content by the freeze, and that it can be further refined by the release, if needed. This helps us ensure that the developer has time to merge good content by the freeze, and that it can be further refined by the release, if needed.
- To decide whether to request this review before the merge, consider the amount of time left before the code freeze, the size of the change, - To decide whether to request this review before the merge, consider the amount of time left before the code freeze, the size of the change,
and your degree of confidence in having users of an RC use your docs as written. and your degree of confidence in having users of an RC use your docs as written.
- Pre-merge tech writer reviews should be most common when the code is complete well in advance of the freeze and/or for larger documentation changes. - Pre-merge tech writer reviews should be most common when the code is complete well in advance of the freeze and/or for larger documentation changes.
- You can request a review and if there is not sufficient time to complete it prior to the freeze, - You can request a review and if there is not sufficient time to complete it prior to the freeze,
the maintainer can merge the current doc changes (if complete) and create a follow-up doc review issue. the maintainer can merge the current doc changes (if complete) and create a follow-up doc review issue.
- The technical writer can also help decide what docs to merge before the freeze and whether to work on further changes in a follow up MR. - The technical writer can also help decide what docs to merge before the freeze and whether to work on further changes in a follow up MR.
- **To request a pre-merge technical writer review**, assign the writer listed for the applicable [DevOps stage](https://about.gitlab.com/handbook/product/categories/#devops-stages). - **To request a pre-merge technical writer review**, assign the writer listed for the applicable [DevOps stage](https://about.gitlab.com/handbook/product/categories/#devops-stages).
- **To request a post-merge technical writer review**, [create an issue for one using the Doc Review template](https://gitlab.com/gitlab-org/gitlab-ce/issues/new?issuable_template=Doc%20Review) and link it from the MR that makes the doc change. - **To request a post-merge technical writer review**, [create an issue for one using the Doc Review template](https://gitlab.com/gitlab-org/gitlab-ce/issues/new?issuable_template=Doc%20Review) and link it from the MR that makes the doc change.
1. **The maintainer** who is assigned to merge the MR, to verify clarity, completeness, and quality, to the best of their ability. 1. **The maintainer** who is assigned to merge the MR, to verify clarity, completeness, and quality, to the best of their ability.
- Upon merging, if a technical writer review has not been performed and there is not yet a linked issue for a follow-up review, the maintainer should [create an issue using the Doc Review template](https://gitlab.com/gitlab-org/gitlab-ce/issues/new?issuable_template=Doc%20Review), link it from the MR, and - Upon merging, if a technical writer review has not been performed and there is not yet a linked issue for a follow-up review, the maintainer should [create an issue using the Doc Review template](https://gitlab.com/gitlab-org/gitlab-ce/issues/new?issuable_template=Doc%20Review), link it from the MR, and
mention the original MR author in the new issue. Alternatively, the mainitainer can ask the MR author to create and link this issue before the MR is merged. mention the original MR author in the new issue. Alternatively, the mainitainer can ask the MR author to create and link this issue before the MR is merged.
- After merging, documentation changes are reviewed by: - After merging, documentation changes are reviewed by:
1. The technical writer--**if** their review was not performed prior to the merge. 1. The technical writer--**if** their review was not performed prior to the merge.
2. Optionally: by the PM (for accuracy and to ensure it's consistent with the vision for how the product will be used). 2. Optionally: by the PM (for accuracy and to ensure it's consistent with the vision for how the product will be used).
Any party can raise the item to the PM for review at any point: the dev, the technical writer, or the PM, who can request/plan a review at the outset. Any party can raise the item to the PM for review at any point: the dev, the technical writer, or the PM, who can request/plan a review at the outset.
### Technical Writer role ### Technical Writer role
#### Planning #### Planning
- The technical writer monitors the documentation needs of issues assigned to the current and next milestone - The technical writer monitors the documentation needs of issues assigned to the current and next milestone
for their DevOps stage(s), and participates in any needed discussion on docs planning and requirements refinement for their DevOps stage(s), and participates in any needed discussion on docs planning and requirements refinement
with the dev, PM, and others. with the dev, PM, and others.
- The technical writer will review these requirements again upon the kickoff and provide feedback, as needed. - The technical writer will review these requirements again upon the kickoff and provide feedback, as needed.
This is not a blocking review and developers should not wait to work on docs. This is not a blocking review and developers should not wait to work on docs.
#### Collaboration #### Collaboration
...@@ -165,12 +165,12 @@ Additionally, technical writers are available for questions at any time. ...@@ -165,12 +165,12 @@ Additionally, technical writers are available for questions at any time.
#### Review #### Review
- Techncial writers provide non-blocking reviews of all documentation changes, - Techncial writers provide non-blocking reviews of all documentation changes,
before or after the change is merged. However, if the docs are ready in the MR while before or after the change is merged. However, if the docs are ready in the MR while
there's time before the freeze, the technical writer's review can commence early, on request. there's time before the freeze, the technical writer's review can commence early, on request.
- The technical writer will confirm that the doc is clear, grammatically correct, - The technical writer will confirm that the doc is clear, grammatically correct,
and discoverable, while avoiding redundancy, bad file locations, typos, broken links, and discoverable, while avoiding redundancy, bad file locations, typos, broken links,
etc. The technical writer will review the documentation for the following, which etc. The technical writer will review the documentation for the following, which
the developer and code reviewer should have already made a good-faith effort to ensure: the developer and code reviewer should have already made a good-faith effort to ensure:
- Clarity. - Clarity.
- Adherence to the plans and goals in the issue. - Adherence to the plans and goals in the issue.
- Location (make sure the docs are in the correct directorkes and has the correct name). - Location (make sure the docs are in the correct directorkes and has the correct name).
......
...@@ -21,10 +21,10 @@ to accomplish their work with GitLab. ...@@ -21,10 +21,10 @@ to accomplish their work with GitLab.
## How to update the docs ## How to update the docs
1. Click "Edit this Page" at the bottom of any page on docs.gitlab.com, or navigate to 1. Click "Edit this Page" at the bottom of any page on docs.gitlab.com, or navigate to
one of the repositories and doc paths listed on the [GitLab Documentation guidelines](index.md) page. one of the repositories and doc paths listed on the [GitLab Documentation guidelines](index.md) page.
Work in a fork if you do not have developer access to the GitLab project. Work in a fork if you do not have developer access to the GitLab project.
1. Follow the described standards and processes listed on that Guidelines page, 1. Follow the described standards and processes listed on that Guidelines page,
including the linked resources: the [Structure and template](structure.md) page, [Style Guide](styleguide.md), and [Markdown Guide](https://about.gitlab.com/handbook/product/technical-writing/markdown-guide/). including the linked resources: the [Structure and template](structure.md) page, [Style Guide](styleguide.md), and [Markdown Guide](https://about.gitlab.com/handbook/product/technical-writing/markdown-guide/).
1. Follow GitLab's [Merge Request Guidelines](../contributing/merge_request_workflow.md#merge-request-guidelines). 1. Follow GitLab's [Merge Request Guidelines](../contributing/merge_request_workflow.md#merge-request-guidelines).
If you need any help to choose the correct place for a doc, discuss a documentation If you need any help to choose the correct place for a doc, discuss a documentation
......
...@@ -20,7 +20,7 @@ Every feature or use case document should include the following content in the f ...@@ -20,7 +20,7 @@ Every feature or use case document should include the following content in the f
with exceptions and details noted below and in the template included on this page. with exceptions and details noted below and in the template included on this page.
- **Title**: Top-level heading with the feature name, or a use case name, which would start with - **Title**: Top-level heading with the feature name, or a use case name, which would start with
a verb, like Configuring, Enabling, etc. a verb, like Configuring, Enabling, etc.
- **Introduction**: A couple sentences about the subject matter and what's to be found on this page. - **Introduction**: A couple sentences about the subject matter and what's to be found on this page.
- **Overview** Describe what it is, what it does, and in what context it should be used. - **Overview** Describe what it is, what it does, and in what context it should be used.
- **Use cases**: describes real use case scenarios for that feature/configuration. - **Use cases**: describes real use case scenarios for that feature/configuration.
......
...@@ -61,17 +61,19 @@ Please use your best judgement when to use it and please contribute new points t ...@@ -61,17 +61,19 @@ Please use your best judgement when to use it and please contribute new points t
--- ---
### Share your work early ### Share your work early
1. Before writing code, ensure your vision of the architecture is aligned with 1. Before writing code, ensure your vision of the architecture is aligned with
GitLab's architecture. GitLab's architecture.
1. Add a diagram to the issue and ask a frontend architect in the slack channel `#fe_architectural` about it. 1. Add a diagram to the issue and ask a frontend architect in the slack channel `#fe_architectural` about it.
![Diagram of Issue Boards Architecture](img/boards_diagram.png) ![Diagram of Issue Boards Architecture](img/boards_diagram.png)
1. Don't take more than one week between starting work on a feature and 1. Don't take more than one week between starting work on a feature and
sharing a Merge Request with a reviewer or a maintainer. sharing a Merge Request with a reviewer or a maintainer.
### Vue features ### Vue features
1. Follow the steps in [Vue.js Best Practices](vue.md) 1. Follow the steps in [Vue.js Best Practices](vue.md)
1. Follow the style guide. 1. Follow the style guide.
1. Only a handful of people are allowed to merge Vue related features. 1. Only a handful of people are allowed to merge Vue related features.
Reach out to one of Vue experts early in this process. Reach out to one of Vue experts early in this process.
...@@ -9,7 +9,7 @@ Add the `Filter` object to the plugins array of a `DropLab.prototype.init` or `D ...@@ -9,7 +9,7 @@ Add the `Filter` object to the plugins array of a `DropLab.prototype.init` or `D
- `Filter` requires a config value for `template`. - `Filter` requires a config value for `template`.
- `template` should be the key of the objects within your data array that you want to compare - `template` should be the key of the objects within your data array that you want to compare
to the user input string, for filtering. to the user input string, for filtering.
```html ```html
<input href="#" id="trigger" data-dropdown-trigger="#list"> <input href="#" id="trigger" data-dropdown-trigger="#list">
......
...@@ -9,7 +9,7 @@ Add the `InputSetter` object to the plugins array of a `DropLab.prototype.init` ...@@ -9,7 +9,7 @@ Add the `InputSetter` object to the plugins array of a `DropLab.prototype.init`
- `InputSetter` requires a config value for `input` and `valueAttribute`. - `InputSetter` requires a config value for `input` and `valueAttribute`.
- `input` should be the DOM element that you want to manipulate. - `input` should be the DOM element that you want to manipulate.
- `valueAttribute` should be a string that is the name of an attribute on your list items that is used to get the value - `valueAttribute` should be a string that is the name of an attribute on your list items that is used to get the value
to update the `input` element with. to update the `input` element with.
You can also set the `InputSetter` config to an array of objects, which will allow you to update multiple elements. You can also set the `InputSetter` config to an array of objects, which will allow you to update multiple elements.
......
...@@ -5,6 +5,7 @@ ...@@ -5,6 +5,7 @@
### Realtime Components ### Realtime Components
When writing code for realtime features we have to keep a couple of things in mind: When writing code for realtime features we have to keep a couple of things in mind:
1. Do not overload the server with requests. 1. Do not overload the server with requests.
1. It should feel realtime. 1. It should feel realtime.
...@@ -12,16 +13,16 @@ Thus, we must strike a balance between sending requests and the feeling of realt ...@@ -12,16 +13,16 @@ Thus, we must strike a balance between sending requests and the feeling of realt
Use the following rules when creating realtime solutions. Use the following rules when creating realtime solutions.
1. The server will tell you how much to poll by sending `Poll-Interval` in the header. 1. The server will tell you how much to poll by sending `Poll-Interval` in the header.
Use that as your polling interval. This way it is [easy for system administrators to change the Use that as your polling interval. This way it is [easy for system administrators to change the
polling rate](../../administration/polling.md). polling rate](../../administration/polling.md).
A `Poll-Interval: -1` means you should disable polling, and this must be implemented. A `Poll-Interval: -1` means you should disable polling, and this must be implemented.
1. A response with HTTP status different from 2XX should disable polling as well. 1. A response with HTTP status different from 2XX should disable polling as well.
1. Use a common library for polling. 1. Use a common library for polling.
1. Poll on active tabs only. Please use [Visibility](https://github.com/ai/visibilityjs). 1. Poll on active tabs only. Please use [Visibility](https://github.com/ai/visibilityjs).
1. Use regular polling intervals, do not use backoff polling, or jitter, as the interval will be 1. Use regular polling intervals, do not use backoff polling, or jitter, as the interval will be
controlled by the server. controlled by the server.
1. The backend code will most likely be using etags. You do not and should not check for status 1. The backend code will most likely be using etags. You do not and should not check for status
`304 Not Modified`. The browser will transform it for you. `304 Not Modified`. The browser will transform it for you.
### Lazy Loading Images ### Lazy Loading Images
......
...@@ -14,9 +14,9 @@ See [our current .eslintrc](https://gitlab.com/gitlab-org/gitlab-ce/blob/master/ ...@@ -14,9 +14,9 @@ See [our current .eslintrc](https://gitlab.com/gitlab-org/gitlab-ce/blob/master/
#### ESlint #### ESlint
1. **Never** disable eslint rules unless you have a good reason. 1. **Never** disable eslint rules unless you have a good reason.
You may see a lot of legacy files with `/* eslint-disable some-rule, some-other-rule */` You may see a lot of legacy files with `/* eslint-disable some-rule, some-other-rule */`
at the top, but legacy files are a special case. Any time you develop a new feature or at the top, but legacy files are a special case. Any time you develop a new feature or
refactor an existing one, you should abide by the eslint rules. refactor an existing one, you should abide by the eslint rules.
1. **Never Ever EVER** disable eslint globally for a file 1. **Never Ever EVER** disable eslint globally for a file
...@@ -53,7 +53,7 @@ refactor an existing one, you should abide by the eslint rules. ...@@ -53,7 +53,7 @@ refactor an existing one, you should abide by the eslint rules.
1. [class-methods-use-this][eslint-this] 1. [class-methods-use-this][eslint-this]
1. When they are needed _always_ place ESlint directive comment blocks on the first line of a script, 1. When they are needed _always_ place ESlint directive comment blocks on the first line of a script,
followed by any global declarations, then a blank newline prior to any imports or code. followed by any global declarations, then a blank newline prior to any imports or code.
```javascript ```javascript
// bad // bad
...@@ -125,8 +125,8 @@ followed by any global declarations, then a blank newline prior to any imports o ...@@ -125,8 +125,8 @@ followed by any global declarations, then a blank newline prior to any imports o
``` ```
1. Relative paths: when importing a module in the same directory, a child 1. Relative paths: when importing a module in the same directory, a child
directory, or an immediate parent directory prefer relative paths. When directory, or an immediate parent directory prefer relative paths. When
importing a module which is two or more levels up, prefer either `~/` or `ee/`. importing a module which is two or more levels up, prefer either `~/` or `ee/`.
In **app/assets/javascripts/my-feature/subdir**: In **app/assets/javascripts/my-feature/subdir**:
...@@ -163,9 +163,9 @@ importing a module which is two or more levels up, prefer either `~/` or `ee/`. ...@@ -163,9 +163,9 @@ importing a module which is two or more levels up, prefer either `~/` or `ee/`.
``` ```
1. Avoid using IIFE. Although we have a lot of examples of files which wrap their 1. Avoid using IIFE. Although we have a lot of examples of files which wrap their
contents in IIFEs (immediately-invoked function expressions), contents in IIFEs (immediately-invoked function expressions),
this is no longer necessary after the transition from Sprockets to webpack. this is no longer necessary after the transition from Sprockets to webpack.
Do not use them anymore and feel free to remove them when refactoring legacy code. Do not use them anymore and feel free to remove them when refactoring legacy code.
1. Avoid adding to the global namespace. 1. Avoid adding to the global namespace.
```javascript ```javascript
...@@ -484,8 +484,8 @@ Please check this [rules][eslint-plugin-vue-rules] for more documentation. ...@@ -484,8 +484,8 @@ Please check this [rules][eslint-plugin-vue-rules] for more documentation.
``` ```
1. Default key should be provided if the prop is not required. 1. Default key should be provided if the prop is not required.
_Note:_ There are some scenarios where we need to check for the existence of the property. _Note:_ There are some scenarios where we need to check for the existence of the property.
On those a default key should not be provided. On those a default key should not be provided.
```javascript ```javascript
// good // good
......
...@@ -223,6 +223,7 @@ need to test the rendered output. [Vue][vue-test] guide's to unit test show us e ...@@ -223,6 +223,7 @@ need to test the rendered output. [Vue][vue-test] guide's to unit test show us e
## Vue.js Expert Role ## Vue.js Expert Role
One should apply to be a Vue.js expert by opening an MR when the Merge Request's they create and review show: One should apply to be a Vue.js expert by opening an MR when the Merge Request's they create and review show:
- Deep understanding of Vue and Vuex reactivy - Deep understanding of Vue and Vuex reactivy
- Vue and Vuex code are structured according to both official and our guidelines - Vue and Vuex code are structured according to both official and our guidelines
- Full understanding of testing a Vue and Vuex application - Full understanding of testing a Vue and Vuex application
......
...@@ -32,8 +32,8 @@ These logs suffer from a number of problems: ...@@ -32,8 +32,8 @@ These logs suffer from a number of problems:
1. They often lack timestamps or other contextual information (e.g. project ID, user) 1. They often lack timestamps or other contextual information (e.g. project ID, user)
2. They may span multiple lines, which make them hard to find via Elasticsearch. 2. They may span multiple lines, which make them hard to find via Elasticsearch.
3. They lack a common structure, which make them hard to parse by log 3. They lack a common structure, which make them hard to parse by log
forwarders, such as Logstash or Fluentd. This also makes them hard to forwarders, such as Logstash or Fluentd. This also makes them hard to
search. search.
Note that currently on GitLab.com, any messages in `production.log` will Note that currently on GitLab.com, any messages in `production.log` will
NOT get indexed by Elasticsearch due to the sheer volume and noise. They NOT get indexed by Elasticsearch due to the sheer volume and noise. They
...@@ -61,12 +61,12 @@ importer. You want to log issues created, merge requests, etc. as the ...@@ -61,12 +61,12 @@ importer. You want to log issues created, merge requests, etc. as the
importer progresses. Here's what to do: importer progresses. Here's what to do:
1. Look at [the list of GitLab Logs](../administration/logs.md) to see 1. Look at [the list of GitLab Logs](../administration/logs.md) to see
if your log message might belong with one of the existing log files. if your log message might belong with one of the existing log files.
1. If there isn't a good place, consider creating a new filename, but 1. If there isn't a good place, consider creating a new filename, but
check with a maintainer if it makes sense to do so. A log file should check with a maintainer if it makes sense to do so. A log file should
make it easy for people to search pertinent logs in one place. For make it easy for people to search pertinent logs in one place. For
example, `geo.log` contains all logs pertaining to GitLab Geo. example, `geo.log` contains all logs pertaining to GitLab Geo.
To create a new file: To create a new file:
1. Choose a filename (e.g. `importer_json.log`). 1. Choose a filename (e.g. `importer_json.log`).
1. Create a new subclass of `Gitlab::JsonLogger`: 1. Create a new subclass of `Gitlab::JsonLogger`:
...@@ -130,15 +130,15 @@ To create a new file: ...@@ -130,15 +130,15 @@ To create a new file:
## Additional steps with new log files ## Additional steps with new log files
1. Consider log retention settings. By default, Omnibus will rotate any 1. Consider log retention settings. By default, Omnibus will rotate any
logs in `/var/log/gitlab/gitlab-rails/*.log` every hour and [keep at logs in `/var/log/gitlab/gitlab-rails/*.log` every hour and [keep at
most 30 compressed files](https://docs.gitlab.com/omnibus/settings/logs.html#logrotate). most 30 compressed files](https://docs.gitlab.com/omnibus/settings/logs.html#logrotate).
On GitLab.com, that setting is only 6 compressed files. These settings should suffice On GitLab.com, that setting is only 6 compressed files. These settings should suffice
for most users, but you may need to tweak them in [omnibus-gitlab](https://gitlab.com/gitlab-org/omnibus-gitlab). for most users, but you may need to tweak them in [omnibus-gitlab](https://gitlab.com/gitlab-org/omnibus-gitlab).
1. If you add a new file, submit an issue to the [production 1. If you add a new file, submit an issue to the [production
tracker](https://gitlab.com/gitlab-com/gl-infra/production/issues) or tracker](https://gitlab.com/gitlab-com/gl-infra/production/issues) or
a merge request to the [gitlab_fluentd](https://gitlab.com/gitlab-cookbooks/gitlab_fluentd) a merge request to the [gitlab_fluentd](https://gitlab.com/gitlab-cookbooks/gitlab_fluentd)
project. See [this example](https://gitlab.com/gitlab-cookbooks/gitlab_fluentd/merge_requests/51/diffs). project. See [this example](https://gitlab.com/gitlab-cookbooks/gitlab_fluentd/merge_requests/51/diffs).
1. Be sure to update the [GitLab CE/EE documentation](../administration/logs.md) and the [GitLab.com 1. Be sure to update the [GitLab CE/EE documentation](../administration/logs.md) and the [GitLab.com
runbooks](https://gitlab.com/gitlab-com/runbooks/blob/master/howto/logging.md). runbooks](https://gitlab.com/gitlab-com/runbooks/blob/master/howto/logging.md).
...@@ -15,6 +15,7 @@ Check the list of WAI-ARIA roles [here][roles] ...@@ -15,6 +15,7 @@ Check the list of WAI-ARIA roles [here][roles]
When using icons or images that aren't absolutely needed to understand the context, we should use `aria-hidden="true"`. When using icons or images that aren't absolutely needed to understand the context, we should use `aria-hidden="true"`.
On the other hand, if an icon is crucial to understand the context we should do one of the following: On the other hand, if an icon is crucial to understand the context we should do one of the following:
1. Use `aria-label` in the element with a meaningful description 1. Use `aria-label` in the element with a meaningful description
1. Use `aria-labelledby` to point to an element that contains the explanation for that icon 1. Use `aria-labelledby` to point to an element that contains the explanation for that icon
......
...@@ -3,6 +3,7 @@ ...@@ -3,6 +3,7 @@
## Buttons ## Buttons
<a name="button-type"></a><a name="1.1"></a> <a name="button-type"></a><a name="1.1"></a>
- [1.1](#button-type) **Use button type** Button tags requires a `type` attribute according to the [W3C HTML specification][button-type-spec]. - [1.1](#button-type) **Use button type** Button tags requires a `type` attribute according to the [W3C HTML specification][button-type-spec].
``` ```
...@@ -14,6 +15,7 @@ ...@@ -14,6 +15,7 @@
``` ```
<a name="button-role"></a><a name="1.2"></a> <a name="button-role"></a><a name="1.2"></a>
- [1.2](#button-role) **Use button role for non buttons** If an HTML element has an onClick handler but is not a button, it should have `role="button"`. This is more [accessible][button-role-accessible]. - [1.2](#button-role) **Use button role for non buttons** If an HTML element has an onClick handler but is not a button, it should have `role="button"`. This is more [accessible][button-role-accessible].
``` ```
...@@ -27,6 +29,7 @@ ...@@ -27,6 +29,7 @@
## Links ## Links
<a name="blank-links"></a><a name="2.1"></a> <a name="blank-links"></a><a name="2.1"></a>
- [2.1](#blank-links) **Use rel for target blank** Use `rel="noopener noreferrer"` whenever your links open in a new window i.e. `target="_blank"`. This prevents [the following][jitbit-target-blank] security vulnerability documented by JitBit - [2.1](#blank-links) **Use rel for target blank** Use `rel="noopener noreferrer"` whenever your links open in a new window i.e. `target="_blank"`. This prevents [the following][jitbit-target-blank] security vulnerability documented by JitBit
``` ```
...@@ -38,6 +41,7 @@ ...@@ -38,6 +41,7 @@
``` ```
<a name="fake-links"></a><a name="2.2"></a> <a name="fake-links"></a><a name="2.2"></a>
- [2.2](#fake-links) **Do not use fake links** Use a button tag if a link only invokes JavaScript click event handlers. This is more semantic. - [2.2](#fake-links) **Do not use fake links** Use a button tag if a link only invokes JavaScript click event handlers. This is more semantic.
``` ```
......
...@@ -10,6 +10,7 @@ You can run eslint locally by running `yarn eslint` ...@@ -10,6 +10,7 @@ You can run eslint locally by running `yarn eslint`
## Arrays ## Arrays
<a name="avoid-foreach"></a><a name="1.1"></a> <a name="avoid-foreach"></a><a name="1.1"></a>
- [1.1](#avoid-foreach) **Avoid ForEach when mutating data** Use `map`, `reduce` or `filter` instead of `forEach` when mutating data. This will minimize mutations in functions ([which is aligned with Airbnb's style guide][airbnb-minimize-mutations]) - [1.1](#avoid-foreach) **Avoid ForEach when mutating data** Use `map`, `reduce` or `filter` instead of `forEach` when mutating data. This will minimize mutations in functions ([which is aligned with Airbnb's style guide][airbnb-minimize-mutations])
``` ```
...@@ -27,6 +28,7 @@ You can run eslint locally by running `yarn eslint` ...@@ -27,6 +28,7 @@ You can run eslint locally by running `yarn eslint`
## Functions ## Functions
<a name="limit-params"></a><a name="2.1"></a> <a name="limit-params"></a><a name="2.1"></a>
- [2.1](#limit-params) **Limit number of parameters** If your function or method has more than 3 parameters, use an object as a parameter instead. - [2.1](#limit-params) **Limit number of parameters** If your function or method has more than 3 parameters, use an object as a parameter instead.
``` ```
...@@ -44,6 +46,7 @@ You can run eslint locally by running `yarn eslint` ...@@ -44,6 +46,7 @@ You can run eslint locally by running `yarn eslint`
## Classes & constructors ## Classes & constructors
<a name="avoid-constructor-side-effects"></a><a name="3.1"></a> <a name="avoid-constructor-side-effects"></a><a name="3.1"></a>
- [3.1](#avoid-constructor-side-effects) **Avoid side effects in constructors** Avoid making some operations in the `constructor`, such as asynchronous calls, API requests and DOM manipulations. Prefer moving them into separate functions. This will make tests easier to write and code easier to maintain. - [3.1](#avoid-constructor-side-effects) **Avoid side effects in constructors** Avoid making some operations in the `constructor`, such as asynchronous calls, API requests and DOM manipulations. Prefer moving them into separate functions. This will make tests easier to write and code easier to maintain.
```javascript ```javascript
...@@ -71,6 +74,7 @@ You can run eslint locally by running `yarn eslint` ...@@ -71,6 +74,7 @@ You can run eslint locally by running `yarn eslint`
``` ```
<a name="avoid-classes-to-handle-dom-events"></a><a name="3.2"></a> <a name="avoid-classes-to-handle-dom-events"></a><a name="3.2"></a>
- [3.2](#avoid-classes-to-handle-dom-events) **Avoid classes to handle DOM events** If the only purpose of the class is to bind a DOM event and handle the callback, prefer using a function. - [3.2](#avoid-classes-to-handle-dom-events) **Avoid classes to handle DOM events** If the only purpose of the class is to bind a DOM event and handle the callback, prefer using a function.
``` ```
...@@ -95,8 +99,9 @@ You can run eslint locally by running `yarn eslint` ...@@ -95,8 +99,9 @@ You can run eslint locally by running `yarn eslint`
``` ```
<a name="element-container"></a><a name="3.3"></a> <a name="element-container"></a><a name="3.3"></a>
- [3.3](#element-container) **Pass element container to constructor** When your class manipulates the DOM, receive the element container as a parameter. - [3.3](#element-container) **Pass element container to constructor** When your class manipulates the DOM, receive the element container as a parameter.
This is more maintainable and performant. This is more maintainable and performant.
``` ```
// bad // bad
...@@ -117,6 +122,7 @@ This is more maintainable and performant. ...@@ -117,6 +122,7 @@ This is more maintainable and performant.
## Type Casting & Coercion ## Type Casting & Coercion
<a name="use-parseint"></a><a name="4.1"></a> <a name="use-parseint"></a><a name="4.1"></a>
- [4.1](#use-parseint) **Use ParseInt** Use `ParseInt` when converting a numeric string into a number. - [4.1](#use-parseint) **Use ParseInt** Use `ParseInt` when converting a numeric string into a number.
``` ```
...@@ -130,6 +136,7 @@ This is more maintainable and performant. ...@@ -130,6 +136,7 @@ This is more maintainable and performant.
## CSS Selectors ## CSS Selectors
<a name="use-js-prefix"></a><a name="5.1"></a> <a name="use-js-prefix"></a><a name="5.1"></a>
- [5.1](#use-js-prefix) **Use js prefix** If a CSS class is only being used in JavaScript as a reference to the element, prefix the class name with `js-` - [5.1](#use-js-prefix) **Use js prefix** If a CSS class is only being used in JavaScript as a reference to the element, prefix the class name with `js-`
``` ```
...@@ -143,6 +150,7 @@ This is more maintainable and performant. ...@@ -143,6 +150,7 @@ This is more maintainable and performant.
## Modules ## Modules
<a name="use-absolute-paths"></a><a name="6.1"></a> <a name="use-absolute-paths"></a><a name="6.1"></a>
- [6.1](#use-absolute-paths) **Use absolute paths for nearby modules** Use absolute paths if the module you are importing is less than two levels up. - [6.1](#use-absolute-paths) **Use absolute paths for nearby modules** Use absolute paths if the module you are importing is less than two levels up.
``` ```
...@@ -154,6 +162,7 @@ This is more maintainable and performant. ...@@ -154,6 +162,7 @@ This is more maintainable and performant.
``` ```
<a name="use-relative-paths"></a><a name="6.2"></a> <a name="use-relative-paths"></a><a name="6.2"></a>
- [6.2](#use-relative-paths) **Use relative paths for distant modules** If the module you are importing is two or more levels up, use a relative path instead of an absolute path. - [6.2](#use-relative-paths) **Use relative paths for distant modules** If the module you are importing is two or more levels up, use a relative path instead of an absolute path.
``` ```
...@@ -165,22 +174,27 @@ This is more maintainable and performant. ...@@ -165,22 +174,27 @@ This is more maintainable and performant.
``` ```
<a name="global-namespace"></a><a name="6.3"></a> <a name="global-namespace"></a><a name="6.3"></a>
- [6.3](#global-namespace) **Do not add to global namespace** - [6.3](#global-namespace) **Do not add to global namespace**
<a name="domcontentloaded"></a><a name="6.4"></a> <a name="domcontentloaded"></a><a name="6.4"></a>
- [6.4](#domcontentloaded) **Do not use DOMContentLoaded in non-page modules** Imported modules should act the same each time they are loaded. `DOMContentLoaded` events are only allowed on modules loaded in the `/pages/*` directory because those are loaded dynamically with webpack. - [6.4](#domcontentloaded) **Do not use DOMContentLoaded in non-page modules** Imported modules should act the same each time they are loaded. `DOMContentLoaded` events are only allowed on modules loaded in the `/pages/*` directory because those are loaded dynamically with webpack.
## Security ## Security
<a name="avoid-xss"></a><a name="7.1"></a> <a name="avoid-xss"></a><a name="7.1"></a>
- [7.1](#avoid-xss) **Avoid XSS** Do not use `innerHTML`, `append()` or `html()` to set content. It opens up too many vulnerabilities. - [7.1](#avoid-xss) **Avoid XSS** Do not use `innerHTML`, `append()` or `html()` to set content. It opens up too many vulnerabilities.
## ESLint ## ESLint
<a name="disable-eslint-file"></a><a name="8.1"></a> <a name="disable-eslint-file"></a><a name="8.1"></a>
- [8.1](#disable-eslint-file) **Disabling ESLint in new files** Do not disable ESLint when creating new files. Existing files may have existing rules disabled due to legacy compatibility reasons but they are in the process of being refactored. - [8.1](#disable-eslint-file) **Disabling ESLint in new files** Do not disable ESLint when creating new files. Existing files may have existing rules disabled due to legacy compatibility reasons but they are in the process of being refactored.
<a name="disable-eslint-rule"></a><a name="8.2"></a> <a name="disable-eslint-rule"></a><a name="8.2"></a>
- [8.2](#disable-eslint-rule) **Disabling ESLint rule** Do not disable specific ESLint rules. Due to technical debt, you may disable the following rules only if you are invoking/instantiating existing code modules - [8.2](#disable-eslint-rule) **Disabling ESLint rule** Do not disable specific ESLint rules. Due to technical debt, you may disable the following rules only if you are invoking/instantiating existing code modules
- [no-new][no-new] - [no-new][no-new]
......
...@@ -88,10 +88,10 @@ An example debug output would look as follows: ...@@ -88,10 +88,10 @@ An example debug output would look as follows:
Each line represents a rule that was evaluated. There are a few things to note: Each line represents a rule that was evaluated. There are a few things to note:
1. The `-` or `+` symbol indicates whether the rule block was evaluated to be 1. The `-` or `+` symbol indicates whether the rule block was evaluated to be
`false` or `true`, respectively. `false` or `true`, respectively.
2. The number inside the brackets indicates the score. 2. The number inside the brackets indicates the score.
3. The last part of the line (e.g. `@john : Issue/1`) shows the username 3. The last part of the line (e.g. `@john : Issue/1`) shows the username
and subject for that rule. and subject for that rule.
Here you can see that the first four rules were evaluated `false` for Here you can see that the first four rules were evaluated `false` for
which user and subject. For example, you can see in the last line that which user and subject. For example, you can see in the last line that
......
...@@ -51,6 +51,7 @@ request path. By doing this we avoid query parameter ordering problems and make ...@@ -51,6 +51,7 @@ request path. By doing this we avoid query parameter ordering problems and make
route matching easier. route matching easier.
For more information see: For more information see:
- [`Poll-Interval` header](fe_guide/performance.md#realtime-components) - [`Poll-Interval` header](fe_guide/performance.md#realtime-components)
- [RFC 7232](https://tools.ietf.org/html/rfc7232) - [RFC 7232](https://tools.ietf.org/html/rfc7232)
- [ETag proposal](https://gitlab.com/gitlab-org/gitlab-ce/issues/26926) - [ETag proposal](https://gitlab.com/gitlab-org/gitlab-ce/issues/26926)
...@@ -73,6 +73,7 @@ To make sure that indices still fit. You could find great details in: ...@@ -73,6 +73,7 @@ To make sure that indices still fit. You could find great details in:
## Run tests ## Run tests
In order to run the test you can use the following commands: In order to run the test you can use the following commands:
- `rake spec` to run the rspec suite - `rake spec` to run the rspec suite
- `rake karma` to run the karma test suite - `rake karma` to run the karma test suite
- `rake gitlab:test` to run all the tests - `rake gitlab:test` to run all the tests
......
...@@ -41,24 +41,24 @@ Currently, we are using _multi-project pipeline_-like approach to run QA ...@@ -41,24 +41,24 @@ Currently, we are using _multi-project pipeline_-like approach to run QA
pipelines. pipelines.
1. Developer triggers a manual action, that can be found in CE / EE merge 1. Developer triggers a manual action, that can be found in CE / EE merge
requests. This starts a chain of pipelines in multiple projects. requests. This starts a chain of pipelines in multiple projects.
1. The script being executed triggers a pipeline in [Omnibus GitLab][omnibus-gitlab] 1. The script being executed triggers a pipeline in [Omnibus GitLab][omnibus-gitlab]
and waits for the resulting status. We call this a _status attribution_. and waits for the resulting status. We call this a _status attribution_.
1. GitLab packages are being built in the [Omnibus GitLab][omnibus-gitlab] 1. GitLab packages are being built in the [Omnibus GitLab][omnibus-gitlab]
pipeline. Packages are then pushed to its Container Registry. pipeline. Packages are then pushed to its Container Registry.
1. When packages are ready, and available in the registry, a final step in the 1. When packages are ready, and available in the registry, a final step in the
[Omnibus GitLab][omnibus-gitlab] pipeline, triggers a new [Omnibus GitLab][omnibus-gitlab] pipeline, triggers a new
[GitLab QA pipeline][gitlab-qa-pipelines]. It also waits for a resulting status. [GitLab QA pipeline][gitlab-qa-pipelines]. It also waits for a resulting status.
1. GitLab QA pulls images from the registry, spins-up containers and runs tests 1. GitLab QA pulls images from the registry, spins-up containers and runs tests
against a test environment that has been just orchestrated by the `gitlab-qa` against a test environment that has been just orchestrated by the `gitlab-qa`
tool. tool.
1. The result of the [GitLab QA pipeline][gitlab-qa-pipelines] is being 1. The result of the [GitLab QA pipeline][gitlab-qa-pipelines] is being
propagated upstream, through Omnibus, back to the CE / EE merge request. propagated upstream, through Omnibus, back to the CE / EE merge request.
#### How do I write tests? #### How do I write tests?
......
...@@ -21,14 +21,14 @@ First, you'll need an account on Azure. There are three ways to do this: ...@@ -21,14 +21,14 @@ First, you'll need an account on Azure. There are three ways to do this:
- If your company (or you) already has an account, then you are ready to go! - If your company (or you) already has an account, then you are ready to go!
- You can also open your own Azure account for free. _At time of writing_, you get $200 - You can also open your own Azure account for free. _At time of writing_, you get $200
of credit to spend on Azure services for 30 days. You can use this credit to try out paid Azure of credit to spend on Azure services for 30 days. You can use this credit to try out paid Azure
services, exploring Microsoft's cloud for free. Even after the first 30 days, you never have to pay services, exploring Microsoft's cloud for free. Even after the first 30 days, you never have to pay
anything unless you decide to transition to paid services with a Pay-As-You-Go Azure subscription. anything unless you decide to transition to paid services with a Pay-As-You-Go Azure subscription.
This is a great way to try out Azure and cloud computing, and you can This is a great way to try out Azure and cloud computing, and you can
[read more in their comprehensive FAQ][Azure-Free-Account-FAQ]. [read more in their comprehensive FAQ][Azure-Free-Account-FAQ].
- If you have an MSDN subscription, you can activate your Azure subscriber benefits. Your MSDN - If you have an MSDN subscription, you can activate your Azure subscriber benefits. Your MSDN
subscription gives you recurring Azure credits every month, so why not put those credits to use and subscription gives you recurring Azure credits every month, so why not put those credits to use and
try out GitLab right now? try out GitLab right now?
## Working with Azure ## Working with Azure
...@@ -216,10 +216,10 @@ Like all servers, our VM will be running many services. However, we want to open ...@@ -216,10 +216,10 @@ Like all servers, our VM will be running many services. However, we want to open
ports to enable public internet access to two services in particular: ports to enable public internet access to two services in particular:
1. **HTTP** (port 80) - opening port 80 will enable our VM to respond to HTTP requests, allowing 1. **HTTP** (port 80) - opening port 80 will enable our VM to respond to HTTP requests, allowing
public access to the instance of GitLab running on our VM. public access to the instance of GitLab running on our VM.
1. **SSH** (port 22) - opening port 22 will enable our VM to respond to SSH connection requests, 1. **SSH** (port 22) - opening port 22 will enable our VM to respond to SSH connection requests,
allowing public access (with authentication) to remote terminal sessions allowing public access (with authentication) to remote terminal sessions
_(you'll see why we need [SSH] access to our VM [later on in this tutorial](#maintaining-your-gitlab-instance))_ _(you'll see why we need [SSH] access to our VM [later on in this tutorial](#maintaining-your-gitlab-instance))_
### Open HTTP on Port 80 ### Open HTTP on Port 80
......
...@@ -5,6 +5,7 @@ There are a few nuances to Amazon EKS which are important to be aware of, when d ...@@ -5,6 +5,7 @@ There are a few nuances to Amazon EKS which are important to be aware of, when d
## Persistent volume management ## Persistent volume management
There are two methods to manage volume claims on Kubernetes: There are two methods to manage volume claims on Kubernetes:
1. Manually creating each persistent volume (recommended on EKS) 1. Manually creating each persistent volume (recommended on EKS)
1. Utilizing dynamic provisioning to automatically create the persistent volumes 1. Utilizing dynamic provisioning to automatically create the persistent volumes
......
...@@ -12,7 +12,7 @@ See the documentation below for details on how to configure these services. ...@@ -12,7 +12,7 @@ See the documentation below for details on how to configure these services.
- [Akismet](akismet.md) Configure Akismet to stop spam - [Akismet](akismet.md) Configure Akismet to stop spam
- [Auth0 OmniAuth](auth0.md) Enable the Auth0 OmniAuth provider - [Auth0 OmniAuth](auth0.md) Enable the Auth0 OmniAuth provider
- [Bitbucket](bitbucket.md) Import projects from Bitbucket.org and login to your GitLab instance with your - [Bitbucket](bitbucket.md) Import projects from Bitbucket.org and login to your GitLab instance with your
Bitbucket.org account Bitbucket.org account
- [CAS](cas.md) Configure GitLab to sign in using CAS - [CAS](cas.md) Configure GitLab to sign in using CAS
- [External issue tracker](external-issue-tracker.md) Redmine, JIRA, etc. - [External issue tracker](external-issue-tracker.md) Redmine, JIRA, etc.
- [Gmail actions buttons](gmail_action_buttons_for_gitlab.md) Adds GitLab actions to messages - [Gmail actions buttons](gmail_action_buttons_for_gitlab.md) Adds GitLab actions to messages
......
...@@ -4,18 +4,18 @@ To enable the Auth0 OmniAuth provider, you must create an Auth0 account, and an ...@@ -4,18 +4,18 @@ To enable the Auth0 OmniAuth provider, you must create an Auth0 account, and an
application. application.
1. Sign in to the [Auth0 Console](https://auth0.com/auth/login). If you need to 1. Sign in to the [Auth0 Console](https://auth0.com/auth/login). If you need to
create an account, you can do so at the same link. create an account, you can do so at the same link.
1. Select "New App/API". 1. Select "New App/API".
1. Provide the Application Name ('GitLab' works fine). 1. Provide the Application Name ('GitLab' works fine).
1. Once created, you should see the Quick Start options. Disregard them and 1. Once created, you should see the Quick Start options. Disregard them and
select 'Settings' above the Quick Start options. select 'Settings' above the Quick Start options.
1. At the top of the Settings screen, you should see your Domain, Client ID and 1. At the top of the Settings screen, you should see your Domain, Client ID and
Client Secret. Take note of these as you'll need to put them in the Client Secret. Take note of these as you'll need to put them in the
configuration file. For example: configuration file. For example:
- Domain: `test1234.auth0.com` - Domain: `test1234.auth0.com`
- Client ID: `t6X8L2465bNePWLOvt9yi41i` - Client ID: `t6X8L2465bNePWLOvt9yi41i`
- Client Secret: `KbveM3nqfjwCbrhaUy_gDu2dss8TIlHIdzlyf33pB7dEK5u_NyQdp65O_o02hXs2` - Client Secret: `KbveM3nqfjwCbrhaUy_gDu2dss8TIlHIdzlyf33pB7dEK5u_NyQdp65O_o02hXs2`
...@@ -44,7 +44,7 @@ configuration file. For example: ...@@ -44,7 +44,7 @@ configuration file. For example:
``` ```
1. See [Initial OmniAuth Configuration](omniauth.md#initial-omniauth-configuration) 1. See [Initial OmniAuth Configuration](omniauth.md#initial-omniauth-configuration)
for initial settings. for initial settings.
1. Add the provider configuration: 1. Add the provider configuration:
...@@ -76,10 +76,10 @@ for initial settings. ...@@ -76,10 +76,10 @@ for initial settings.
``` ```
1. Change `YOUR_AUTH0_CLIENT_ID` to the client ID from the Auth0 Console page 1. Change `YOUR_AUTH0_CLIENT_ID` to the client ID from the Auth0 Console page
from step 5. from step 5.
1. Change `YOUR_AUTH0_CLIENT_SECRET` to the client secret from the Auth0 Console 1. Change `YOUR_AUTH0_CLIENT_SECRET` to the client secret from the Auth0 Console
page from step 5. page from step 5.
1. [Reconfigure][] or [restart GitLab][] for the changes to take effect if you 1. [Reconfigure][] or [restart GitLab][] for the changes to take effect if you
installed GitLab via Omnibus or from source respectively. installed GitLab via Omnibus or from source respectively.
......
...@@ -9,7 +9,7 @@ To enable the Facebook OmniAuth provider you must register your application with ...@@ -9,7 +9,7 @@ To enable the Facebook OmniAuth provider you must register your application with
1. Select the type "Website" 1. Select the type "Website"
1. Enter a name for your app. This can be anything. Consider something like "&lt;Organization&gt;'s GitLab" or "&lt;Your Name&gt;'s GitLab" or 1. Enter a name for your app. This can be anything. Consider something like "&lt;Organization&gt;'s GitLab" or "&lt;Your Name&gt;'s GitLab" or
something else descriptive. something else descriptive.
1. Choose "Create New Facebook App ID" 1. Choose "Create New Facebook App ID"
......
...@@ -125,10 +125,10 @@ image below we have the settings for this article but note the ...@@ -125,10 +125,10 @@ image below we have the settings for this article but note the
following two options which are of particular interest for HA: following two options which are of particular interest for HA:
1. Multi-AZ-Deployment is recommended as redundancy. Read more at 1. Multi-AZ-Deployment is recommended as redundancy. Read more at
[High Availability (Multi-AZ)](http://docs.aws.amazon.com/AmazonRDS/latest/UserGuide/Concepts.MultiAZ.html) [High Availability (Multi-AZ)](http://docs.aws.amazon.com/AmazonRDS/latest/UserGuide/Concepts.MultiAZ.html)
1. While we chose a General Purpose (SSD) for this article a Provisioned 1. While we chose a General Purpose (SSD) for this article a Provisioned
IOPS (SSD) is best suited for HA. Read more about it at IOPS (SSD) is best suited for HA. Read more about it at
[Storage for Amazon RDS](http://docs.aws.amazon.com/AmazonRDS/latest/UserGuide/CHAP_Storage.html) [Storage for Amazon RDS](http://docs.aws.amazon.com/AmazonRDS/latest/UserGuide/CHAP_Storage.html)
![RDS Instance Specs](img/instance_specs.png) ![RDS Instance Specs](img/instance_specs.png)
......
...@@ -86,6 +86,7 @@ git config --global user.email you@example.com ...@@ -86,6 +86,7 @@ git config --global user.email you@example.com
```bash ```bash
git config --global --list git config --global --list
``` ```
- You might want or be required to use an SSH key. - You might want or be required to use an SSH key.
- Instructions: [SSH](http://doc.gitlab.com/ce/ssh/README.html) - Instructions: [SSH](http://doc.gitlab.com/ce/ssh/README.html)
...@@ -413,6 +414,7 @@ Revert is safer considering we can revert a revert ...@@ -413,6 +414,7 @@ Revert is safer considering we can revert a revert
--- ---
### Version Control ### Version Control
- Local VCS was used with a filesystem or a simple db. - Local VCS was used with a filesystem or a simple db.
- Centralized VCS such as Subversion includes collaboration but - Centralized VCS such as Subversion includes collaboration but
still is prone to data loss as the main server is the single point of still is prone to data loss as the main server is the single point of
......
...@@ -30,7 +30,7 @@ and we need to change to a different branch. ...@@ -30,7 +30,7 @@ and we need to change to a different branch.
---------- ----------
- Every time we save a stash it gets stacked so by using list we can see all our - Every time we save a stash it gets stacked so by using list we can see all our
stashes. stashes.
``` ```
git stash list git stash list
......
...@@ -95,7 +95,7 @@ Now, you can use pgloader to migrate the data from MySQL to PostgreSQL: ...@@ -95,7 +95,7 @@ Now, you can use pgloader to migrate the data from MySQL to PostgreSQL:
``` ```
1. Once the migration finishes, you should see a summary table that looks like 1. Once the migration finishes, you should see a summary table that looks like
the following: the following:
``` ```
table name read imported errors total time table name read imported errors total time
...@@ -242,7 +242,7 @@ Now, you can use pgloader to migrate the data from MySQL to PostgreSQL: ...@@ -242,7 +242,7 @@ Now, you can use pgloader to migrate the data from MySQL to PostgreSQL:
``` ```
1. Once the migration finishes, you should see a summary table that looks like 1. Once the migration finishes, you should see a summary table that looks like
the following: the following:
``` ```
table name read imported errors total time table name read imported errors total time
......
...@@ -248,10 +248,10 @@ For large projects with many contributors, it may be useful to stop discussions ...@@ -248,10 +248,10 @@ For large projects with many contributors, it may be useful to stop discussions
in issues or merge requests in these scenarios: in issues or merge requests in these scenarios:
- The project maintainer has already resolved the discussion and it is not helpful - The project maintainer has already resolved the discussion and it is not helpful
for continued feedback. The project maintainer has already directed new conversation for continued feedback. The project maintainer has already directed new conversation
to newer issues or merge requests. to newer issues or merge requests.
- The people participating in the discussion are trolling, abusive, or otherwise - The people participating in the discussion are trolling, abusive, or otherwise
being unproductive. being unproductive.
In these cases, a user with Developer permissions or higher in the project can lock (and unlock) In these cases, a user with Developer permissions or higher in the project can lock (and unlock)
an issue or a merge request, using the "Lock" section in the sidebar. For issues, an issue or a merge request, using the "Lock" section in the sidebar. For issues,
...@@ -284,7 +284,7 @@ finding useful information can be hard. There is a way to filter comments from s ...@@ -284,7 +284,7 @@ finding useful information can be hard. There is a way to filter comments from s
From a merge request's **Discussion** tab, or from an epic/issue overview, find the filter's dropdown menu on the right side of the page, from which you can choose one of the following options: From a merge request's **Discussion** tab, or from an epic/issue overview, find the filter's dropdown menu on the right side of the page, from which you can choose one of the following options:
- **Show all activity**: displays all user comments and system notes - **Show all activity**: displays all user comments and system notes
(issue updates, mentions from other issues, changes to the description, etc). (issue updates, mentions from other issues, changes to the description, etc).
- **Show comments only**: only displays user comments in the list. - **Show comments only**: only displays user comments in the list.
- **Show history only**: only displays activity notes. - **Show history only**: only displays activity notes.
...@@ -306,7 +306,7 @@ suggestions with a click, which will generate a commit in ...@@ -306,7 +306,7 @@ suggestions with a click, which will generate a commit in
the Merge Request authored by the user that applied them. the Merge Request authored by the user that applied them.
1. Choose a line of code to be changed, add a new comment, then click 1. Choose a line of code to be changed, add a new comment, then click
on the **Insert suggestion** icon in the toolbar: on the **Insert suggestion** icon in the toolbar:
![Add a new comment](img/insert_suggestion.png) ![Add a new comment](img/insert_suggestion.png)
......
...@@ -18,9 +18,9 @@ a link to the group settings. By clicking the last button you can leave that gro ...@@ -18,9 +18,9 @@ a link to the group settings. By clicking the last button you can leave that gro
You can create groups for numerous reasons. To name a few: You can create groups for numerous reasons. To name a few:
- Organize related projects under the same [namespace](#namespaces), add members to that - Organize related projects under the same [namespace](#namespaces), add members to that
group and grant access to all their projects at once group and grant access to all their projects at once
- Create a group, include members of your team, and make it easier to - Create a group, include members of your team, and make it easier to
`@mention` all the team at once in issues and merge requests `@mention` all the team at once in issues and merge requests
- Create a group for your company members, and create [subgroups](subgroups/index.md) - Create a group for your company members, and create [subgroups](subgroups/index.md)
for each individual team. Let's say you create a group called `company-team`, and among others, for each individual team. Let's say you create a group called `company-team`, and among others,
you created subgroups in this group for each individual team `backend-team`, you created subgroups in this group for each individual team `backend-team`,
...@@ -43,11 +43,11 @@ In GitLab, a namespace is a unique name to be used as a user name, a group name, ...@@ -43,11 +43,11 @@ In GitLab, a namespace is a unique name to be used as a user name, a group name,
For example, consider a user named Alex: For example, consider a user named Alex:
1. Alex creates an account on GitLab.com with the username `alex`; 1. Alex creates an account on GitLab.com with the username `alex`;
their profile will be accessed under `https://gitlab.example.com/alex` their profile will be accessed under `https://gitlab.example.com/alex`
1. Alex creates a group for their team with the groupname `alex-team`; 1. Alex creates a group for their team with the groupname `alex-team`;
the group and its projects will be accessed under `https://gitlab.example.com/alex-team` the group and its projects will be accessed under `https://gitlab.example.com/alex-team`
1. Alex creates a subgroup of `alex-team` with the subgroup name `marketing`; 1. Alex creates a subgroup of `alex-team` with the subgroup name `marketing`;
this subgroup and its projects will be accessed under `https://gitlab.example.com/alex-team/marketing` this subgroup and its projects will be accessed under `https://gitlab.example.com/alex-team/marketing`
By doing so: By doing so:
...@@ -107,7 +107,7 @@ Consider we have a group with two projects: ...@@ -107,7 +107,7 @@ Consider we have a group with two projects:
- On the **Group Members** page we can now add a new user to the group. - On the **Group Members** page we can now add a new user to the group.
- Now because this user is a **Developer** member of the group, he automatically - Now because this user is a **Developer** member of the group, he automatically
gets **Developer** access to **all projects** within that group. gets **Developer** access to **all projects** within that group.
If necessary, you can increase the access level of an individual user for a specific project, If necessary, you can increase the access level of an individual user for a specific project,
by adding them again as a new member to the project with the new permission levels. by adding them again as a new member to the project with the new permission levels.
...@@ -267,9 +267,9 @@ Define project templates at a group-level by setting a group as a template sourc ...@@ -267,9 +267,9 @@ Define project templates at a group-level by setting a group as a template sourc
### Advanced settings ### Advanced settings
- **Projects**: view all projects within that group, add members to each project, - **Projects**: view all projects within that group, add members to each project,
access each project's settings, and remove any project from the same screen. access each project's settings, and remove any project from the same screen.
- **Webhooks**: configure [webhooks](../project/integrations/webhooks.md) to your group. - **Webhooks**: configure [webhooks](../project/integrations/webhooks.md) to your group.
- **Kubernetes cluster integration**: connect your GitLab group with [Kubernetes clusters](clusters/index.md). - **Kubernetes cluster integration**: connect your GitLab group with [Kubernetes clusters](clusters/index.md).
- **Audit Events**: view [Audit Events](https://docs.gitlab.com/ee/administration/audit_events.html#audit-events) - **Audit Events**: view [Audit Events](https://docs.gitlab.com/ee/administration/audit_events.html#audit-events)
for the group. **[STARTER ONLY]** for the group. **[STARTER ONLY]**
- **Pipelines quota**: keep track of the [pipeline quota](../admin_area/settings/continuous_integration.md) for the group. - **Pipelines quota**: keep track of the [pipeline quota](../admin_area/settings/continuous_integration.md) for the group.
...@@ -38,10 +38,10 @@ GitLab is a Git-based platform that integrates a great number of essential tools ...@@ -38,10 +38,10 @@ GitLab is a Git-based platform that integrates a great number of essential tools
- Hosting code in repositories with version control - Hosting code in repositories with version control
- Tracking proposals for new implementations, bug reports, and feedback with a - Tracking proposals for new implementations, bug reports, and feedback with a
fully featured [Issue Tracker](project/issues/index.md#issue-tracker) fully featured [Issue Tracker](project/issues/index.md#issue-tracker)
- Organizing and prioritizing with [Issue Boards](project/issues/index.md#issue-boards) - Organizing and prioritizing with [Issue Boards](project/issues/index.md#issue-boards)
- Reviewing code in [Merge Requests](project/merge_requests/index.md) with live-preview changes per - Reviewing code in [Merge Requests](project/merge_requests/index.md) with live-preview changes per
branch with [Review Apps](../ci/review_apps/index.md) branch with [Review Apps](../ci/review_apps/index.md)
- Building, testing and deploying with built-in [Continuous Integration](../ci/README.md) - Building, testing and deploying with built-in [Continuous Integration](../ci/README.md)
- Deploying personal and professional static websites with [GitLab Pages](project/pages/index.md) - Deploying personal and professional static websites with [GitLab Pages](project/pages/index.md)
- Integrating with Docker by using [GitLab Container Registry](project/container_registry.md) - Integrating with Docker by using [GitLab Container Registry](project/container_registry.md)
...@@ -51,9 +51,9 @@ With GitLab Enterprise Edition, you can also: ...@@ -51,9 +51,9 @@ With GitLab Enterprise Edition, you can also:
- Provide support with [Service Desk](https://docs.gitlab.com/ee/user/project/service_desk.html) - Provide support with [Service Desk](https://docs.gitlab.com/ee/user/project/service_desk.html)
- Improve collaboration with - Improve collaboration with
[Merge Request Approvals](https://docs.gitlab.com/ee/user/project/merge_requests/index.html#merge-request-approvals), [Merge Request Approvals](https://docs.gitlab.com/ee/user/project/merge_requests/index.html#merge-request-approvals),
[Multiple Assignees for Issues](https://docs.gitlab.com/ee/user/project/issues/multiple_assignees_for_issues.html), [Multiple Assignees for Issues](https://docs.gitlab.com/ee/user/project/issues/multiple_assignees_for_issues.html),
and [Multiple Issue Boards](https://docs.gitlab.com/ee/user/project/issue_board.html#multiple-issue-boards) and [Multiple Issue Boards](https://docs.gitlab.com/ee/user/project/issue_board.html#multiple-issue-boards)
- Create formal relationships between issues with [Related Issues](https://docs.gitlab.com/ee/user/project/issues/related_issues.html) - Create formal relationships between issues with [Related Issues](https://docs.gitlab.com/ee/user/project/issues/related_issues.html)
- Use [Burndown Charts](https://docs.gitlab.com/ee/user/project/milestones/burndown_charts.html) to track progress during a sprint or while working on a new version of their software. - Use [Burndown Charts](https://docs.gitlab.com/ee/user/project/milestones/burndown_charts.html) to track progress during a sprint or while working on a new version of their software.
- Leverage [Elasticsearch](https://docs.gitlab.com/ee/integration/elasticsearch.html) with [Advanced Global Search](https://docs.gitlab.com/ee/user/search/advanced_global_search.html) and [Advanced Syntax Search](https://docs.gitlab.com/ee/user/search/advanced_search_syntax.html) for faster, more advanced code search across your entire GitLab instance - Leverage [Elasticsearch](https://docs.gitlab.com/ee/integration/elasticsearch.html) with [Advanced Global Search](https://docs.gitlab.com/ee/user/search/advanced_global_search.html) and [Advanced Syntax Search](https://docs.gitlab.com/ee/user/search/advanced_search_syntax.html) for faster, more advanced code search across your entire GitLab instance
...@@ -77,12 +77,12 @@ build, test, and deploy your app with built-in GitLab CI/CD. Or, you can do ...@@ -77,12 +77,12 @@ build, test, and deploy your app with built-in GitLab CI/CD. Or, you can do
it all at once, from one single project. it all at once, from one single project.
- [Repositories](project/repository/index.md): Host your codebase in - [Repositories](project/repository/index.md): Host your codebase in
repositories with version control and as part of a fully integrated platform. repositories with version control and as part of a fully integrated platform.
- [Issues](project/issues/index.md): Explore the best of GitLab Issues' features. - [Issues](project/issues/index.md): Explore the best of GitLab Issues' features.
- [Merge Requests](project/merge_requests/index.md): Collaborate on code, - [Merge Requests](project/merge_requests/index.md): Collaborate on code,
reviews, live preview changes per branch, and request approvals with Merge Requests. reviews, live preview changes per branch, and request approvals with Merge Requests.
- [Milestones](project/milestones/index.md): Work on multiple issues and merge - [Milestones](project/milestones/index.md): Work on multiple issues and merge
requests towards the same target date with Milestones. requests towards the same target date with Milestones.
## GitLab CI/CD ## GitLab CI/CD
...@@ -92,9 +92,9 @@ directly from GitLab. No third-party integrations needed. ...@@ -92,9 +92,9 @@ directly from GitLab. No third-party integrations needed.
- [GitLab Auto Deploy](../ci/autodeploy/index.md): Deploy your application out-of-the-box with GitLab Auto Deploy. - [GitLab Auto Deploy](../ci/autodeploy/index.md): Deploy your application out-of-the-box with GitLab Auto Deploy.
- [Review Apps](../ci/review_apps/index.md): Live-preview the changes introduced by a merge request with Review Apps. - [Review Apps](../ci/review_apps/index.md): Live-preview the changes introduced by a merge request with Review Apps.
- [GitLab Pages](project/pages/index.md): Publish your static site directly from - [GitLab Pages](project/pages/index.md): Publish your static site directly from
GitLab with GitLab Pages. You can build, test, and deploy any Static Site Generator with Pages. GitLab with GitLab Pages. You can build, test, and deploy any Static Site Generator with Pages.
- [GitLab Container Registry](project/container_registry.md): Build and deploy Docker - [GitLab Container Registry](project/container_registry.md): Build and deploy Docker
images with Container Registry. images with Container Registry.
## Account ## Account
...@@ -102,13 +102,13 @@ There is a lot you can customize and configure ...@@ -102,13 +102,13 @@ There is a lot you can customize and configure
to enjoy the best of GitLab. to enjoy the best of GitLab.
- [Settings](profile/index.md): Manage your user settings to change your personal info, - [Settings](profile/index.md): Manage your user settings to change your personal info,
personal access tokens, authorized applications, etc. personal access tokens, authorized applications, etc.
- [Authentication](../topics/authentication/index.md): Read through the authentication - [Authentication](../topics/authentication/index.md): Read through the authentication
methods available in GitLab. methods available in GitLab.
- [Permissions](permissions.md): Learn the different set of permissions levels for each - [Permissions](permissions.md): Learn the different set of permissions levels for each
user type (guest, reporter, developer, maintainer, owner). user type (guest, reporter, developer, maintainer, owner).
- [Feature highlight](feature_highlight.md): Learn more about the little blue dots - [Feature highlight](feature_highlight.md): Learn more about the little blue dots
around the app that explain certain features around the app that explain certain features
- [Abuse reports](abuse_reports.md): Report abuse from users to GitLab administrators - [Abuse reports](abuse_reports.md): Report abuse from users to GitLab administrators
## Groups ## Groups
......
...@@ -41,7 +41,7 @@ or a U2F device. ...@@ -41,7 +41,7 @@ or a U2F device.
**On your phone:** **On your phone:**
1. Install a compatible application. We recommend [Google Authenticator] 1. Install a compatible application. We recommend [Google Authenticator]
\(proprietary\) or [FreeOTP] \(open source\). \(proprietary\) or [FreeOTP] \(open source\).
1. In the application, add a new entry in one of two ways: 1. In the application, add a new entry in one of two ways:
- Scan the code with your phone's camera to add the entry automatically. - Scan the code with your phone's camera to add the entry automatically.
- Enter the details provided to add the entry manually. - Enter the details provided to add the entry manually.
......
...@@ -35,13 +35,13 @@ From there, you can: ...@@ -35,13 +35,13 @@ From there, you can:
- Manage [2FA](account/two_factor_authentication.md) - Manage [2FA](account/two_factor_authentication.md)
- Change your username and [delete your account](account/delete_account.md) - Change your username and [delete your account](account/delete_account.md)
- Manage applications that can - Manage applications that can
[use GitLab as an OAuth provider](../../integration/oauth_provider.md#introduction-to-oauth) [use GitLab as an OAuth provider](../../integration/oauth_provider.md#introduction-to-oauth)
- Manage [personal access tokens](personal_access_tokens.md) to access your account via API and authorized applications - Manage [personal access tokens](personal_access_tokens.md) to access your account via API and authorized applications
- Add and delete emails linked to your account - Add and delete emails linked to your account
- Choose which email to use for notifications, web-based commits, and display on your public profile - Choose which email to use for notifications, web-based commits, and display on your public profile
- Manage [SSH keys](../../ssh/README.md#ssh) to access your account via SSH - Manage [SSH keys](../../ssh/README.md#ssh) to access your account via SSH
- Manage your [preferences](preferences.md#syntax-highlighting-theme) - Manage your [preferences](preferences.md#syntax-highlighting-theme)
to customize your own GitLab experience to customize your own GitLab experience
- [View your active sessions](active_sessions.md) and revoke any of them if necessary - [View your active sessions](active_sessions.md) and revoke any of them if necessary
- Access your audit log, a security log of important events involving your account - Access your audit log, a security log of important events involving your account
......
...@@ -80,6 +80,7 @@ Here's a little explanation of how this works behind the scenes: ...@@ -80,6 +80,7 @@ Here's a little explanation of how this works behind the scenes:
To sum up, anything that doesn't follow the [GitLab flow] won't be tracked at all. To sum up, anything that doesn't follow the [GitLab flow] won't be tracked at all.
So, the Cycle Analytics dashboard won't present any data: So, the Cycle Analytics dashboard won't present any data:
- For merge requests that do not close an issue. - For merge requests that do not close an issue.
- For issues not labeled with a label present in the Issue Board. - For issues not labeled with a label present in the Issue Board.
- For issues not assigned a milestone. - For issues not assigned a milestone.
......
...@@ -22,14 +22,14 @@ Import your projects from Bitbucket Server to GitLab with minimal effort. ...@@ -22,14 +22,14 @@ Import your projects from Bitbucket Server to GitLab with minimal effort.
## Limitations ## Limitations
1. Currently GitLab doesn't allow comments on arbitrary lines of code, so any 1. Currently GitLab doesn't allow comments on arbitrary lines of code, so any
Bitbucket comments out of bounds will be inserted as comments in the merge Bitbucket comments out of bounds will be inserted as comments in the merge
request. request.
1. Bitbucket Server allows multiple levels of threading. GitLab 1. Bitbucket Server allows multiple levels of threading. GitLab
import will collapse this into one discussion and quote part of the original import will collapse this into one discussion and quote part of the original
comment. comment.
1. Declined pull requests have unreachable commits, which prevents the GitLab 1. Declined pull requests have unreachable commits, which prevents the GitLab
importer from generating a proper diff. These pull requests will show up as importer from generating a proper diff. These pull requests will show up as
empty changes. empty changes.
1. Attachments in Markdown are currently not imported. 1. Attachments in Markdown are currently not imported.
1. Task lists are not imported. 1. Task lists are not imported.
1. Emoji reactions are not imported 1. Emoji reactions are not imported
......
...@@ -23,6 +23,6 @@ users to GitLab users. ...@@ -23,6 +23,6 @@ users to GitLab users.
![Import Project](img/fogbugz_import_select_project.png) ![Import Project](img/fogbugz_import_select_project.png)
1. Once the import has finished click the link to take you to the project 1. Once the import has finished click the link to take you to the project
dashboard. Follow the directions to push your existing repository. dashboard. Follow the directions to push your existing repository.
![Finished](img/fogbugz_import_finished.png) ![Finished](img/fogbugz_import_finished.png)
...@@ -67,7 +67,7 @@ developer documentation. ...@@ -67,7 +67,7 @@ developer documentation.
Before you begin, ensure that any GitHub users who you want to map to GitLab users have either: Before you begin, ensure that any GitHub users who you want to map to GitLab users have either:
- A GitLab account that has logged in using the GitHub icon - A GitLab account that has logged in using the GitHub icon
\- or - \- or -
- A GitLab account with an email address that matches the [public email address](https://help.github.com/articles/setting-your-commit-email-address-on-github/) of the GitHub user - A GitLab account with an email address that matches the [public email address](https://help.github.com/articles/setting-your-commit-email-address-on-github/) of the GitHub user
User-matching attempts occur in that order, and if a user is not identified either way, the activity is associated with User-matching attempts occur in that order, and if a user is not identified either way, the activity is associated with
......
...@@ -19,7 +19,7 @@ When you create a project in GitLab, you'll have access to a large number of ...@@ -19,7 +19,7 @@ When you create a project in GitLab, you'll have access to a large number of
- [Issue Boards](issue_board.md): Organize and prioritize your workflow - [Issue Boards](issue_board.md): Organize and prioritize your workflow
- [Multiple Issue Boards](https://docs.gitlab.com/ee/user/project/issue_board.html#multiple-issue-boards): Allow your teams to create their own workflows (Issue Boards) for the same project **[STARTER]** - [Multiple Issue Boards](https://docs.gitlab.com/ee/user/project/issue_board.html#multiple-issue-boards): Allow your teams to create their own workflows (Issue Boards) for the same project **[STARTER]**
- [Repositories](repository/index.md): Host your code in a fully - [Repositories](repository/index.md): Host your code in a fully
integrated platform integrated platform
- [Branches](repository/branches/index.md): use Git branching strategies to - [Branches](repository/branches/index.md): use Git branching strategies to
collaborate on code collaborate on code
- [Protected branches](protected_branches.md): Prevent collaborators - [Protected branches](protected_branches.md): Prevent collaborators
...@@ -29,7 +29,7 @@ integrated platform ...@@ -29,7 +29,7 @@ integrated platform
- [Signing commits](gpg_signed_commits/index.md): use GPG to sign your commits - [Signing commits](gpg_signed_commits/index.md): use GPG to sign your commits
- [Deploy tokens](deploy_tokens/index.md): Manage project-based deploy tokens that allow permanent access to the repository and Container Registry. - [Deploy tokens](deploy_tokens/index.md): Manage project-based deploy tokens that allow permanent access to the repository and Container Registry.
- [Merge Requests](merge_requests/index.md): Apply your branching - [Merge Requests](merge_requests/index.md): Apply your branching
strategy and get reviewed by your team strategy and get reviewed by your team
- [Merge Request Approvals](https://docs.gitlab.com/ee/user/project/merge_requests/merge_request_approvals.html): Ask for approval before - [Merge Request Approvals](https://docs.gitlab.com/ee/user/project/merge_requests/merge_request_approvals.html): Ask for approval before
implementing a change **[STARTER]** implementing a change **[STARTER]**
- [Fix merge conflicts from the UI](merge_requests/resolve_conflicts.md): - [Fix merge conflicts from the UI](merge_requests/resolve_conflicts.md):
...@@ -38,13 +38,13 @@ strategy and get reviewed by your team ...@@ -38,13 +38,13 @@ strategy and get reviewed by your team
of the changes proposed in a merge request in a per-branch basis of the changes proposed in a merge request in a per-branch basis
- [Labels](labels.md): Organize issues and merge requests by labels - [Labels](labels.md): Organize issues and merge requests by labels
- [Time Tracking](../../workflow/time_tracking.md): Track estimate time - [Time Tracking](../../workflow/time_tracking.md): Track estimate time
and time spent on and time spent on
the conclusion of an issue or merge request the conclusion of an issue or merge request
- [Milestones](milestones/index.md): Work towards a target date - [Milestones](milestones/index.md): Work towards a target date
- [Description templates](description_templates.md): Define context-specific - [Description templates](description_templates.md): Define context-specific
templates for issue and merge request description fields for your project templates for issue and merge request description fields for your project
- [Slash commands (quick actions)](quick_actions.md): Textual shortcuts for - [Slash commands (quick actions)](quick_actions.md): Textual shortcuts for
common actions on issues or merge requests common actions on issues or merge requests
- [Web IDE](web_ide/index.md) - [Web IDE](web_ide/index.md)
**GitLab CI/CD:** **GitLab CI/CD:**
...@@ -68,7 +68,7 @@ common actions on issues or merge requests ...@@ -68,7 +68,7 @@ common actions on issues or merge requests
- [Kubernetes cluster integration](clusters/index.md): Connecting your GitLab project - [Kubernetes cluster integration](clusters/index.md): Connecting your GitLab project
with a Kubernetes cluster with a Kubernetes cluster
- [GitLab Pages](pages/index.md): Build, test, and deploy your static - [GitLab Pages](pages/index.md): Build, test, and deploy your static
website with GitLab Pages website with GitLab Pages
**Other features:** **Other features:**
...@@ -76,11 +76,11 @@ website with GitLab Pages ...@@ -76,11 +76,11 @@ website with GitLab Pages
- [Snippets](../snippets.md): store, share and collaborate on code snippets. - [Snippets](../snippets.md): store, share and collaborate on code snippets.
- [Cycle Analytics](cycle_analytics.md): review your development lifecycle. - [Cycle Analytics](cycle_analytics.md): review your development lifecycle.
- [Syntax highlighting](highlighting.md): an alternative to customize - [Syntax highlighting](highlighting.md): an alternative to customize
your code blocks, overriding GitLab's default choice of language. your code blocks, overriding GitLab's default choice of language.
- [Badges](badges.md): badges for the project overview. - [Badges](badges.md): badges for the project overview.
- [Releases](releases/index.md): a way to track deliverables in your project as snapshot in time of - [Releases](releases/index.md): a way to track deliverables in your project as snapshot in time of
the source, build output, and other metadata or artifacts the source, build output, and other metadata or artifacts
associated with a released version of your code. associated with a released version of your code.
### Project's integrations ### Project's integrations
...@@ -96,7 +96,7 @@ Learn how to [create a new project](../../gitlab-basics/create-project.md) in Gi ...@@ -96,7 +96,7 @@ Learn how to [create a new project](../../gitlab-basics/create-project.md) in Gi
You can [fork a project](../../gitlab-basics/fork-project.md) in order to: You can [fork a project](../../gitlab-basics/fork-project.md) in order to:
- Collaborate on code by forking a project and creating a merge request - Collaborate on code by forking a project and creating a merge request
from your fork to the upstream project from your fork to the upstream project
- Fork a sample project to work on the top of that - Fork a sample project to work on the top of that
## Project settings ## Project settings
......
...@@ -30,12 +30,12 @@ need to follow the firsts steps of the next section. ...@@ -30,12 +30,12 @@ need to follow the firsts steps of the next section.
1. Click "Irker". 1. Click "Irker".
1. Select the "Active" checkbox. 1. Select the "Active" checkbox.
1. Enter the server host address where `irkerd` runs (defaults to `localhost`) 1. Enter the server host address where `irkerd` runs (defaults to `localhost`)
in the `Server host` field on the Web page in the `Server host` field on the Web page
1. Enter the server port of `irkerd` (e.g. defaults to 6659) in the 1. Enter the server port of `irkerd` (e.g. defaults to 6659) in the
`Server port` field on the Web page. `Server port` field on the Web page.
1. Optional: if `Default IRC URI` is set, it has to be in the format 1. Optional: if `Default IRC URI` is set, it has to be in the format
`irc[s]://domain.name` and will be prepend to each and every channel provided `irc[s]://domain.name` and will be prepend to each and every channel provided
by the user which is not a full URI. by the user which is not a full URI.
1. Specify the recipients (e.g. #channel1, user1, etc.) 1. Specify the recipients (e.g. #channel1, user1, etc.)
1. Save or optionally click "Test Settings". 1. Save or optionally click "Test Settings".
......
# Redmine Service # Redmine Service
1. To enable the Redmine integration in a project, navigate to the 1. To enable the Redmine integration in a project, navigate to the
[Integrations page](project_services.md#accessing-the-project-services), click [Integrations page](project_services.md#accessing-the-project-services), click
the **Redmine** service, and fill in the required details on the page as described the **Redmine** service, and fill in the required details on the page as described
in the table below. in the table below.
| Field | Description | | Field | Description |
| ----- | ----------- | | ----- | ----------- |
......
...@@ -48,9 +48,9 @@ Navigate to the webhooks page by going to your project's ...@@ -48,9 +48,9 @@ Navigate to the webhooks page by going to your project's
## Use-cases ## Use-cases
- You can set up a webhook in GitLab to send a notification to - You can set up a webhook in GitLab to send a notification to
[Slack](https://api.slack.com/incoming-webhooks) every time a build fails, for example [Slack](https://api.slack.com/incoming-webhooks) every time a build fails, for example
- You can [integrate with Twilio to be notified via SMS](https://www.datadoghq.com/blog/send-alerts-sms-customizable-webhooks-twilio/) - You can [integrate with Twilio to be notified via SMS](https://www.datadoghq.com/blog/send-alerts-sms-customizable-webhooks-twilio/)
every time an issue is created for a specific project or group within GitLab every time an issue is created for a specific project or group within GitLab
- You can use them to [automatically assign labels to merge requests](https://about.gitlab.com/2016/08/19/applying-gitlab-labels-automatically/). - You can use them to [automatically assign labels to merge requests](https://about.gitlab.com/2016/08/19/applying-gitlab-labels-automatically/).
## Webhook endpoint tips ## Webhook endpoint tips
......
...@@ -78,9 +78,9 @@ with labels, and from there organize and prioritize them with Issue Boards. ...@@ -78,9 +78,9 @@ with labels, and from there organize and prioritize them with Issue Boards.
For example, let's consider this simplified development workflow: For example, let's consider this simplified development workflow:
1. You have a repository hosting your app's codebase 1. You have a repository hosting your app's codebase
and your team actively contributing to code and your team actively contributing to code
1. Your **backend** team starts working a new 1. Your **backend** team starts working a new
implementation, gathers feedback and approval, and pass it over to **frontend** implementation, gathers feedback and approval, and pass it over to **frontend**
1. When frontend is complete, the new feature is deployed to **staging** to be tested 1. When frontend is complete, the new feature is deployed to **staging** to be tested
1. When successful, it is deployed to **production** 1. When successful, it is deployed to **production**
...@@ -88,7 +88,7 @@ If we have the labels "**backend**", "**frontend**", "**staging**", and ...@@ -88,7 +88,7 @@ If we have the labels "**backend**", "**frontend**", "**staging**", and
"**production**", and an Issue Board with a list for each, we can: "**production**", and an Issue Board with a list for each, we can:
- Visualize the entire flow of implementations since the - Visualize the entire flow of implementations since the
beginning of the development lifecycle until deployed to production beginning of the development lifecycle until deployed to production
- Prioritize the issues in a list by moving them vertically - Prioritize the issues in a list by moving them vertically
- Move issues between lists to organize them according to the labels you've set - Move issues between lists to organize them according to the labels you've set
- Add multiple issues to lists in the board by selecting one or more existing issues - Add multiple issues to lists in the board by selecting one or more existing issues
......
# Automatic issue closing # Automatic issue closing
>**Notes:** >**Notes:**
>
> - This is the user docs. In order to change the default issue closing pattern, > - This is the user docs. In order to change the default issue closing pattern,
> follow the steps in the [administration docs]. > follow the steps in the [administration docs].
> - For performance reasons, automatic issue closing is disabled for the very > - For performance reasons, automatic issue closing is disabled for the very
......
...@@ -79,6 +79,6 @@ in the same URL (since a description template just populates the description fie ...@@ -79,6 +79,6 @@ in the same URL (since a description template just populates the description fie
Follow these examples to form your new issue URL with prefilled fields. Follow these examples to form your new issue URL with prefilled fields.
- For a new issue in the GitLab Community Edition project with a pre-entered title - For a new issue in the GitLab Community Edition project with a pre-entered title
and a pre-entered description, the URL would be `https://gitlab.com/gitlab-org/gitlab-ce/issues/new?issue[title]=Validate%20new%20concept&issue[description]=Research%20idea` and a pre-entered description, the URL would be `https://gitlab.com/gitlab-org/gitlab-ce/issues/new?issue[title]=Validate%20new%20concept&issue[description]=Research%20idea`
- For a new issue in the GitLab Community Edition project with a pre-entered title - For a new issue in the GitLab Community Edition project with a pre-entered title
and a pre-entered description template, the URL would be `https://gitlab.com/gitlab-org/gitlab-ce/issues/new?issue[title]=Validate%20new%20concept&issuable_template=Research%20proposal` and a pre-entered description template, the URL would be `https://gitlab.com/gitlab-org/gitlab-ce/issues/new?issue[title]=Validate%20new%20concept&issuable_template=Research%20proposal`
...@@ -42,6 +42,7 @@ server's timezone. ...@@ -42,6 +42,7 @@ server's timezone.
Issues with due dates can also be exported as an iCalendar feed. The URL of the Issues with due dates can also be exported as an iCalendar feed. The URL of the
feed can be added to calendar applications. The feed is accessible by clicking feed can be added to calendar applications. The feed is accessible by clicking
on the _Subscribe to calendar_ button on the following pages: on the _Subscribe to calendar_ button on the following pages:
- on the **Assigned Issues** page that is linked on the right-hand side of the - on the **Assigned Issues** page that is linked on the right-hand side of the
GitLab header GitLab header
- on the **Project Issues** page - on the **Project Issues** page
......
...@@ -99,16 +99,16 @@ Learn more in the [Issue Weight documentation](https://docs.gitlab.com/ee/workfl ...@@ -99,16 +99,16 @@ Learn more in the [Issue Weight documentation](https://docs.gitlab.com/ee/workfl
#### 10. Notifications #### 10. Notifications
- Subscribe: if you are not a participant of the discussion on that issue, but - Subscribe: if you are not a participant of the discussion on that issue, but
want to receive notifications on each new input, subscribe to it. want to receive notifications on each new input, subscribe to it.
- Unsubscribe: if you are receiving notifications on that issue but no - Unsubscribe: if you are receiving notifications on that issue but no
longer want to receive them, unsubscribe from it. longer want to receive them, unsubscribe from it.
Read more in the [notifications documentation](../../../workflow/notifications.md#issue--merge-request-events). Read more in the [notifications documentation](../../../workflow/notifications.md#issue--merge-request-events).
#### 11. Reference #### 11. Reference
- A quick "copy to clipboard" button for that issue's reference, `foo/bar#xxx`, where `foo` is the `username` or `groupname`, `bar` - A quick "copy to clipboard" button for that issue's reference, `foo/bar#xxx`, where `foo` is the `username` or `groupname`, `bar`
is the `project-name`, and `xxx` is the issue number. is the `project-name`, and `xxx` is the issue number.
#### 12. Title and description #### 12. Title and description
...@@ -138,7 +138,7 @@ interpreted as spam. ...@@ -138,7 +138,7 @@ interpreted as spam.
#### 14. Related Merge Requests #### 14. Related Merge Requests
- Any merge requests mentioned in that issue's description - Any merge requests mentioned in that issue's description
or in the issue discussion thread. or in the issue discussion thread.
#### 15. Award emoji #### 15. Award emoji
...@@ -152,8 +152,8 @@ know you like it without spamming them. ...@@ -152,8 +152,8 @@ know you like it without spamming them.
#### 16. Thread #### 16. Thread
- Comments: collaborate to that issue by posting comments in its thread. - Comments: collaborate to that issue by posting comments in its thread.
These text fields also fully support These text fields also fully support
[GitLab Flavored Markdown](../../markdown.md#gitlab-flavored-markdown-gfm). [GitLab Flavored Markdown](../../markdown.md#gitlab-flavored-markdown-gfm).
#### 17. Comment, start a discussion, or comment and close #### 17. Comment, start a discussion, or comment and close
...@@ -166,7 +166,7 @@ Once you write a comment, you can either: ...@@ -166,7 +166,7 @@ Once you write a comment, you can either:
#### 18. New Merge Request #### 18. New Merge Request
- Create a new merge request (with a new source branch named after the issue) in one action. - Create a new merge request (with a new source branch named after the issue) in one action.
The merge request will automatically inherit the milestone and labels of the issue. The merge The merge request will automatically inherit the milestone and labels of the issue. The merge
request will automatically close that issue when it is merged. request will automatically close that issue when it is merged.
- Optionally, you can just create a [new branch](../repository/web_editor.md#create-a-new-branch-from-an-issue) - Optionally, you can just create a [new branch](../repository/web_editor.md#create-a-new-branch-from-an-issue)
named after that issue. named after that issue.
...@@ -21,7 +21,7 @@ GitLab provides an easy way to connect Sentry to your project: ...@@ -21,7 +21,7 @@ GitLab provides an easy way to connect Sentry to your project:
1. Sign up to Sentry.io or [deploy your own](#deploying-sentry) Sentry instance. 1. Sign up to Sentry.io or [deploy your own](#deploying-sentry) Sentry instance.
1. [Find or generate](https://docs.sentry.io/api/auth/) a Sentry auth token for your Sentry project. 1. [Find or generate](https://docs.sentry.io/api/auth/) a Sentry auth token for your Sentry project.
Make sure to give the token at least the following scopes: `event:read` and `project:read`. Make sure to give the token at least the following scopes: `event:read` and `project:read`.
1. Navigate to your project’s **Settings > Operations** and provide the Sentry API URL and auth token. 1. Navigate to your project’s **Settings > Operations** and provide the Sentry API URL and auth token.
1. Ensure that the 'Active' checkbox is set. 1. Ensure that the 'Active' checkbox is set.
1. Click **Save changes** for the changes to take effect. 1. Click **Save changes** for the changes to take effect.
......
...@@ -376,11 +376,11 @@ manually in the past. Read through the ...@@ -376,11 +376,11 @@ manually in the past. Read through the
to understand how to go even further on your scripts. to understand how to go even further on your scripts.
- On this blog post, understand the concept of - On this blog post, understand the concept of
[using GitLab CI `environments` to deploy your [using GitLab CI `environments` to deploy your
web app to staging and production](https://about.gitlab.com/2016/08/26/ci-deployment-and-environments/). web app to staging and production](https://about.gitlab.com/2016/08/26/ci-deployment-and-environments/).
- On this post, learn [how to run jobs sequentially, - On this post, learn [how to run jobs sequentially,
in parallel, or build a custom pipeline](https://about.gitlab.com/2016/07/29/the-basics-of-gitlab-ci/) in parallel, or build a custom pipeline](https://about.gitlab.com/2016/07/29/the-basics-of-gitlab-ci/)
- On this blog post, we go through the process of - On this blog post, we go through the process of
[pulling specific directories from different projects](https://about.gitlab.com/2016/12/07/building-a-new-gitlab-docs-site-with-nanoc-gitlab-ci-and-gitlab-pages/) [pulling specific directories from different projects](https://about.gitlab.com/2016/12/07/building-a-new-gitlab-docs-site-with-nanoc-gitlab-ci-and-gitlab-pages/)
to deploy this website you're looking at, docs.gitlab.com. to deploy this website you're looking at, docs.gitlab.com.
- On this blog post, we teach you [how to use GitLab Pages to produce a code coverage report](https://about.gitlab.com/2016/11/03/publish-code-coverage-report-with-gitlab-pages/). - On this blog post, we teach you [how to use GitLab Pages to produce a code coverage report](https://about.gitlab.com/2016/11/03/publish-code-coverage-report-with-gitlab-pages/).
...@@ -77,41 +77,41 @@ Learn more about [namespaces](../../group/index.md#namespaces). ...@@ -77,41 +77,41 @@ Learn more about [namespaces](../../group/index.md#namespaces).
#### Project Websites #### Project Websites
- You created a project called `blog` under your username `john`, - You created a project called `blog` under your username `john`,
therefore your project URL is `https://gitlab.com/john/blog/`. therefore your project URL is `https://gitlab.com/john/blog/`.
Once you enable GitLab Pages for this project, and build your site, Once you enable GitLab Pages for this project, and build your site,
it will be available under `https://john.gitlab.io/blog/`. it will be available under `https://john.gitlab.io/blog/`.
- You created a group for all your websites called `websites`, - You created a group for all your websites called `websites`,
and a project within this group is called `blog`. Your project and a project within this group is called `blog`. Your project
URL is `https://gitlab.com/websites/blog/`. Once you enable URL is `https://gitlab.com/websites/blog/`. Once you enable
GitLab Pages for this project, the site will live under GitLab Pages for this project, the site will live under
`https://websites.gitlab.io/blog/`. `https://websites.gitlab.io/blog/`.
- You created a group for your engineering department called `engineering`, - You created a group for your engineering department called `engineering`,
a subgroup for all your documentation websites called `docs`, a subgroup for all your documentation websites called `docs`,
and a project within this subgroup is called `workflows`. Your project and a project within this subgroup is called `workflows`. Your project
URL is `https://gitlab.com/engineering/docs/workflows/`. Once you enable URL is `https://gitlab.com/engineering/docs/workflows/`. Once you enable
GitLab Pages for this project, the site will live under GitLab Pages for this project, the site will live under
`https://engineering.gitlab.io/docs/workflows`. `https://engineering.gitlab.io/docs/workflows`.
#### User and Group Websites #### User and Group Websites
- Under your username, `john`, you created a project called - Under your username, `john`, you created a project called
`john.gitlab.io`. Your project URL will be `https://gitlab.com/john/john.gitlab.io`. `john.gitlab.io`. Your project URL will be `https://gitlab.com/john/john.gitlab.io`.
Once you enable GitLab Pages for your project, your website Once you enable GitLab Pages for your project, your website
will be published under `https://john.gitlab.io`. will be published under `https://john.gitlab.io`.
- Under your group `websites`, you created a project called - Under your group `websites`, you created a project called
`websites.gitlab.io`. your project's URL will be `https://gitlab.com/websites/websites.gitlab.io`. `websites.gitlab.io`. your project's URL will be `https://gitlab.com/websites/websites.gitlab.io`.
Once you enable GitLab Pages for your project, Once you enable GitLab Pages for your project,
your website will be published under `https://websites.gitlab.io`. your website will be published under `https://websites.gitlab.io`.
> Support for subgroup project's websites was [introduced](https://gitlab.com/gitlab-org/gitlab-ce/issues/30548) in GitLab 11.8. > Support for subgroup project's websites was [introduced](https://gitlab.com/gitlab-org/gitlab-ce/issues/30548) in GitLab 11.8.
**General example:** **General example:**
- On GitLab.com, a project site will always be available under - On GitLab.com, a project site will always be available under
`https://namespace.gitlab.io/project-name` `https://namespace.gitlab.io/project-name`
- On GitLab.com, a user or group website will be available under - On GitLab.com, a user or group website will be available under
`https://namespace.gitlab.io/` `https://namespace.gitlab.io/`
- On your GitLab instance, replace `gitlab.io` above with your - On your GitLab instance, replace `gitlab.io` above with your
Pages server domain. Ask your sysadmin for this information. Pages server domain. Ask your sysadmin for this information.
_Read on about [Projects for GitLab Pages and URL structure](getting_started_part_two.md)._ _Read on about [Projects for GitLab Pages and URL structure](getting_started_part_two.md)._
...@@ -19,7 +19,7 @@ To use one or more custom domain with your Pages site, there are two things ...@@ -19,7 +19,7 @@ To use one or more custom domain with your Pages site, there are two things
you should consider first, which we'll cover in this guide: you should consider first, which we'll cover in this guide:
1. Either if you're adding a **root domain** or a **subdomain**, for which 1. Either if you're adding a **root domain** or a **subdomain**, for which
you'll need to set up [DNS records](#dns-records) you'll need to set up [DNS records](#dns-records)
1. Whether you want to add an [SSL/TLS certificate](#ssl-tls-certificates) or not 1. Whether you want to add an [SSL/TLS certificate](#ssl-tls-certificates) or not
To finish the association, you need to [add your domain to your project's Pages settings](#add-your-custom-domain-to-gitlab-pages-settings). To finish the association, you need to [add your domain to your project's Pages settings](#add-your-custom-domain-to-gitlab-pages-settings).
...@@ -136,13 +136,13 @@ verify your domain's ownership with a TXT record: ...@@ -136,13 +136,13 @@ verify your domain's ownership with a TXT record:
> **Notes**: > **Notes**:
> >
> - **Do not** use a CNAME record if you want to point your > - **Do not** use a CNAME record if you want to point your
`domain.com` to your GitLab Pages site. Use an `A` record instead. `domain.com` to your GitLab Pages site. Use an `A` record instead.
> - **Do not** add any special chars after the default Pages > - **Do not** add any special chars after the default Pages
domain. E.g., **do not** point your `subdomain.domain.com` to domain. E.g., **do not** point your `subdomain.domain.com` to
`namespace.gitlab.io.` or `namespace.gitlab.io/`. `namespace.gitlab.io.` or `namespace.gitlab.io/`.
> - GitLab Pages IP on GitLab.com [was changed](https://about.gitlab.com/2017/03/06/we-are-changing-the-ip-of-gitlab-pages-on-gitlab-com/) in 2017 > - GitLab Pages IP on GitLab.com [was changed](https://about.gitlab.com/2017/03/06/we-are-changing-the-ip-of-gitlab-pages-on-gitlab-com/) in 2017
> - GitLab Pages IP on GitLab.com [has been changed](https://about.gitlab.com/2018/07/19/gcp-move-update/#gitlab-pages-and-custom-domains) > - GitLab Pages IP on GitLab.com [has been changed](https://about.gitlab.com/2018/07/19/gcp-move-update/#gitlab-pages-and-custom-domains)
from `52.167.214.135` to `35.185.44.232` in 2018 from `52.167.214.135` to `35.185.44.232` in 2018
### Add your custom domain to GitLab Pages settings ### Add your custom domain to GitLab Pages settings
...@@ -278,15 +278,15 @@ These fields are found under your **Project**'s **Settings** > **Pages** > **New ...@@ -278,15 +278,15 @@ These fields are found under your **Project**'s **Settings** > **Pages** > **New
### What's what? ### What's what?
- A PEM certificate is the certificate generated by the CA, - A PEM certificate is the certificate generated by the CA,
which needs to be added to the field **Certificate (PEM)**. which needs to be added to the field **Certificate (PEM)**.
- An [intermediate certificate](https://en.wikipedia.org/wiki/Intermediate_certificate_authority) (aka "root certificate") is - An [intermediate certificate](https://en.wikipedia.org/wiki/Intermediate_certificate_authority) (aka "root certificate") is
the part of the encryption keychain that identifies the CA. the part of the encryption keychain that identifies the CA.
Usually it's combined with the PEM certificate, but there are Usually it's combined with the PEM certificate, but there are
some cases in which you need to add them manually. some cases in which you need to add them manually.
[CloudFlare certs](https://about.gitlab.com/2017/02/07/setting-up-gitlab-pages-with-cloudflare-certificates/) [CloudFlare certs](https://about.gitlab.com/2017/02/07/setting-up-gitlab-pages-with-cloudflare-certificates/)
are one of these cases. are one of these cases.
- A private key is an encrypted key which validates - A private key is an encrypted key which validates
your PEM against your domain. your PEM against your domain.
### Now what? ### Now what?
...@@ -295,9 +295,9 @@ of this, it's simple: ...@@ -295,9 +295,9 @@ of this, it's simple:
- Your PEM certificate needs to be added to the first field - Your PEM certificate needs to be added to the first field
- If your certificate is missing its intermediate, copy - If your certificate is missing its intermediate, copy
and paste the root certificate (usually available from your CA website) and paste the root certificate (usually available from your CA website)
and paste it in the [same field as your PEM certificate](https://about.gitlab.com/2017/02/07/setting-up-gitlab-pages-with-cloudflare-certificates/), and paste it in the [same field as your PEM certificate](https://about.gitlab.com/2017/02/07/setting-up-gitlab-pages-with-cloudflare-certificates/),
just jumping a line between them. just jumping a line between them.
- Copy your private key and paste it in the last field - Copy your private key and paste it in the last field
>**Note:** >**Note:**
......
...@@ -16,7 +16,7 @@ To get started with GitLab Pages, you need: ...@@ -16,7 +16,7 @@ To get started with GitLab Pages, you need:
1. A project 1. A project
1. A configuration file (`.gitlab-ci.yml`) to deploy your site 1. A configuration file (`.gitlab-ci.yml`) to deploy your site
1. A specific `job` called `pages` in the configuration file 1. A specific `job` called `pages` in the configuration file
that will make GitLab aware that you are deploying a GitLab Pages website that will make GitLab aware that you are deploying a GitLab Pages website
1. A `public` directory with the content of the website 1. A `public` directory with the content of the website
Optional Features: Optional Features:
...@@ -85,16 +85,16 @@ is useful for submitting merge requests to the upstream. ...@@ -85,16 +85,16 @@ is useful for submitting merge requests to the upstream.
### Create a project from scratch ### Create a project from scratch
1. From your **Project**'s **[Dashboard](https://gitlab.com/dashboard/projects)**, 1. From your **Project**'s **[Dashboard](https://gitlab.com/dashboard/projects)**,
click **New project**, and name it considering the click **New project**, and name it considering the
[practical examples](getting_started_part_one.md#practical-examples). [practical examples](getting_started_part_one.md#practical-examples).
1. Clone it to your local computer, add your website 1. Clone it to your local computer, add your website
files to your project, add, commit and push to GitLab. files to your project, add, commit and push to GitLab.
1. From the your **Project**'s page, click **Set up CI/CD**: 1. From the your **Project**'s page, click **Set up CI/CD**:
![setup GitLab CI/CD](img/setup_ci.png) ![setup GitLab CI/CD](img/setup_ci.png)
1. Choose one of the templates from the dropbox menu. 1. Choose one of the templates from the dropbox menu.
Pick up the template corresponding to the SSG you're using (or plain HTML). Pick up the template corresponding to the SSG you're using (or plain HTML).
![gitlab-ci templates](img/choose_ci_template.png) ![gitlab-ci templates](img/choose_ci_template.png)
...@@ -107,20 +107,20 @@ where you'll find its default URL. ...@@ -107,20 +107,20 @@ where you'll find its default URL.
> **Notes:** > **Notes:**
> >
> - GitLab Pages [supports any SSG](https://about.gitlab.com/2016/06/17/ssg-overview-gitlab-pages-part-3-examples-ci/), but, > - GitLab Pages [supports any SSG](https://about.gitlab.com/2016/06/17/ssg-overview-gitlab-pages-part-3-examples-ci/), but,
if you don't find yours among the templates, you'll need if you don't find yours among the templates, you'll need
to configure your own `.gitlab-ci.yml`. To do that, please to configure your own `.gitlab-ci.yml`. To do that, please
read through the article [Creating and Tweaking GitLab CI/CD for GitLab Pages](getting_started_part_four.md). New SSGs are very welcome among read through the article [Creating and Tweaking GitLab CI/CD for GitLab Pages](getting_started_part_four.md). New SSGs are very welcome among
the [example projects](https://gitlab.com/pages). If you set the [example projects](https://gitlab.com/pages). If you set
up a new one, please up a new one, please
[contribute](https://gitlab.com/pages/pages.gitlab.io/blob/master/CONTRIBUTING.md) [contribute](https://gitlab.com/pages/pages.gitlab.io/blob/master/CONTRIBUTING.md)
to our examples. to our examples.
> >
> - The second step _"Clone it to your local computer"_, can be done > - The second step _"Clone it to your local computer"_, can be done
differently, achieving the same results: instead of cloning the bare differently, achieving the same results: instead of cloning the bare
repository to you local computer and moving your site files into it, repository to you local computer and moving your site files into it,
you can run `git init` in your local website directory, add the you can run `git init` in your local website directory, add the
remote URL: `git remote add origin git@gitlab.com:namespace/project-name.git`, remote URL: `git remote add origin git@gitlab.com:namespace/project-name.git`,
then add, commit, and push. then add, commit, and push.
## URLs and Baseurls ## URLs and Baseurls
......
...@@ -97,7 +97,7 @@ use a [bundled template](getting_started_part_two.md#use-one-of-the-popular-page ...@@ -97,7 +97,7 @@ use a [bundled template](getting_started_part_two.md#use-one-of-the-popular-page
1. Choose an [example project](https://gitlab.com/pages) to [fork](../../../gitlab-basics/fork-project.md#how-to-fork-a-project): 1. Choose an [example project](https://gitlab.com/pages) to [fork](../../../gitlab-basics/fork-project.md#how-to-fork-a-project):
by forking a project, you create a copy of the codebase you're forking from to start from a template instead of starting from scratch. by forking a project, you create a copy of the codebase you're forking from to start from a template instead of starting from scratch.
1. From the left sidebar, navigate to your project's **CI/CD > Pipelines** and click 1. From the left sidebar, navigate to your project's **CI/CD > Pipelines** and click
**Run pipeline** so that GitLab CI/CD will build and deploy your site to the server. **Run pipeline** so that GitLab CI/CD will build and deploy your site to the server.
1. Once the pipeline has finished successfully, find the link to visit your website from your 1. Once the pipeline has finished successfully, find the link to visit your website from your
project's **Settings > Pages**. project's **Settings > Pages**.
......
...@@ -146,9 +146,9 @@ you are introducing those changes to your branch. ...@@ -146,9 +146,9 @@ you are introducing those changes to your branch.
Via command line, you can commit multiple times before pushing. Via command line, you can commit multiple times before pushing.
- **Commit message:** - **Commit message:**
A commit message is important to identity what is being changed and, A commit message is important to identity what is being changed and,
more importantly, why. In GitLab, you can add keywords to the commit more importantly, why. In GitLab, you can add keywords to the commit
message that will perform one of the actions below: message that will perform one of the actions below:
- **Trigger a GitLab CI/CD pipeline:** - **Trigger a GitLab CI/CD pipeline:**
If you have your project configured with [GitLab CI/CD](../../../ci/README.md), If you have your project configured with [GitLab CI/CD](../../../ci/README.md),
you will trigger a pipeline per push, not per commit. you will trigger a pipeline per push, not per commit.
...@@ -162,14 +162,14 @@ message that will perform one of the actions below: ...@@ -162,14 +162,14 @@ message that will perform one of the actions below:
If you mention an issue or a merge request in a commit message, they will be shown If you mention an issue or a merge request in a commit message, they will be shown
on their respective thread. on their respective thread.
- **Cherry-pick a commit:** - **Cherry-pick a commit:**
In GitLab, you can In GitLab, you can
[cherry-pick a commit](../merge_requests/cherry_pick_changes.md#cherry-picking-a-commit) [cherry-pick a commit](../merge_requests/cherry_pick_changes.md#cherry-picking-a-commit)
right from the UI. right from the UI.
- **Revert a commit:** - **Revert a commit:**
Easily [revert a commit](../merge_requests/revert_changes.md#reverting-a-commit) Easily [revert a commit](../merge_requests/revert_changes.md#reverting-a-commit)
from the UI to a selected branch. from the UI to a selected branch.
- **Sign a commit:** - **Sign a commit:**
Use GPG to [sign your commits](gpg_signed_commits/index.md). Use GPG to [sign your commits](gpg_signed_commits/index.md).
## Repository size ## Repository size
......
...@@ -30,10 +30,10 @@ the Web IDE will make your direct editing even easier. ...@@ -30,10 +30,10 @@ the Web IDE will make your direct editing even easier.
The Web IDE currently provides: The Web IDE currently provides:
- Basic syntax colorization for a variety of programming, scripting and markup - Basic syntax colorization for a variety of programming, scripting and markup
languages such as XML, PHP, C#, C++, Markdown, Java, VB, Batch, Python, Ruby languages such as XML, PHP, C#, C++, Markdown, Java, VB, Batch, Python, Ruby
and Objective-C. and Objective-C.
- IntelliSense and validation support (displaying errors and warnings, providing - IntelliSense and validation support (displaying errors and warnings, providing
smart completions, formatting, and outlining) for some languages. For example: smart completions, formatting, and outlining) for some languages. For example:
TypeScript, JavaScript, CSS, LESS, SCSS, JSON and HTML. TypeScript, JavaScript, CSS, LESS, SCSS, JSON and HTML.
Because the Web IDE is based on the [Monaco Editor](https://microsoft.github.io/monaco-editor/), Because the Web IDE is based on the [Monaco Editor](https://microsoft.github.io/monaco-editor/),
......
...@@ -5,6 +5,7 @@ existing routes used by GitLab. ...@@ -5,6 +5,7 @@ existing routes used by GitLab.
For a list of words that are not allowed to be used as group or project names, see the For a list of words that are not allowed to be used as group or project names, see the
[`path_regex.rb` file][reserved] under the `TOP_LEVEL_ROUTES`, `PROJECT_WILDCARD_ROUTES` and `GROUP_ROUTES` lists: [`path_regex.rb` file][reserved] under the `TOP_LEVEL_ROUTES`, `PROJECT_WILDCARD_ROUTES` and `GROUP_ROUTES` lists:
- `TOP_LEVEL_ROUTES`: are names that are reserved as usernames or top level groups - `TOP_LEVEL_ROUTES`: are names that are reserved as usernames or top level groups
- `PROJECT_WILDCARD_ROUTES`: are names that are reserved for child groups or projects. - `PROJECT_WILDCARD_ROUTES`: are names that are reserved for child groups or projects.
- `GROUP_ROUTES`: are names that are reserved for all groups or projects. - `GROUP_ROUTES`: are names that are reserved for all groups or projects.
......
...@@ -11,7 +11,7 @@ Time Tracking lets you: ...@@ -11,7 +11,7 @@ Time Tracking lets you:
- Record the time spent working on an issue or a merge request. - Record the time spent working on an issue or a merge request.
- Add an estimate of the amount of time needed to complete an issue or a merge - Add an estimate of the amount of time needed to complete an issue or a merge
request. request.
You don't have to indicate an estimate to enter the time spent, and vice versa. You don't have to indicate an estimate to enter the time spent, and vice versa.
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment