Skip to content

G
gitlab-ce
Commit c3cbc40d authored by Evan Read's avatar Evan Read
Browse files
Options

Merge branch 'docs/cleanup-gitaly' into 'master' 

Clean up the Gitaly docs

Closes #64396

See merge request gitlab-org/gitlab-ce!30584
parents c61c3b68 0923fbf7
Show whitespace changes
Inline Side-by-side
Showing with 359 additions and 311 deletions
doc/administration/gitaly/index.md
View file @ c3cbc40d
......@@ -2,45 +2,35 @@
[Gitaly](https://gitlab.com/gitlab-org/gitaly) is the service that
provides high-level RPC access to Git repositories. Without it, no other
components can read or write Git data.
components can read or write Git data. GitLab components that access Git
repositories (gitlab-rails, gitlab-shell, gitlab-workhorse, etc.) act as clients
to Gitaly. End users do not have direct access to Gitaly.
GitLab components that access Git repositories (gitlab-rails,
gitlab-shell, gitlab-workhorse) act as clients to Gitaly. End users do
not have direct access to Gitaly.
In the rest of this page, Gitaly server is referred to the standalone node that
only runs Gitaly, and Gitaly client to the GitLab Rails node that runs all other
processes except Gitaly.
## Configuring Gitaly
The Gitaly service itself is configured via a TOML configuration file.
This file is documented [in the gitaly
This file is documented [in the Gitaly
repository](https://gitlab.com/gitlab-org/gitaly/blob/master/doc/configuration/README.md).
To change a Gitaly setting in Omnibus you can use
`gitaly['my_setting']` in `/etc/gitlab/gitlab.rb`. Changes will be applied
when you run `gitlab-ctl reconfigure`.
In case you want to change some of its settings:
```ruby
gitaly['prometheus_listen_addr'] = 'localhost:9236'
```
To change a Gitaly setting in installations from source you can edit
`/home/git/gitaly/config.toml`. Changes will be applied when you run
`service gitlab restart`.
**For Omnibus GitLab**
```toml
prometheus_listen_addr = "localhost:9236"
```
1. Edit `/etc/gitlab/gitlab.rb` and add or change the [Gitaly settings](https://gitlab.com/gitlab-org/omnibus-gitlab/blob/1dd07197c7e5ae23626aad5a4a070a800b670380/files/gitlab-config-template/gitlab.rb.template#L1622-1676).
1. Save the file and [reconfigure GitLab](../restart_gitlab.md#omnibus-gitlab-reconfigure).
## Client-side GRPC logs
**For installations from source**
Gitaly uses the [gRPC](https://grpc.io/) RPC framework. The Ruby gRPC
client has its own log file which may contain useful information when
you are seeing Gitaly errors. You can control the log level of the
gRPC client with the `GRPC_LOG_LEVEL` environment variable. The
default level is `WARN`.
1. Edit `/home/git/gitaly/config.toml` and add or change the [Gitaly settings](https://gitlab.com/gitlab-org/gitaly/blob/master/config.toml.example).
1. Save the file and [restart GitLab](../restart_gitlab.md#installations-from-source).
## Running Gitaly on its own server
> This is an optional way to deploy Gitaly which can benefit GitLab
This is an optional way to deploy Gitaly which can benefit GitLab
installations that are larger than a single machine. Most
installations will be better served with the default configuration
used by Omnibus and the GitLab source installation guide.
......@@ -53,76 +43,78 @@ But since 11.8 the indexer uses Gitaly for data access as well. NFS can still
be leveraged for redudancy on block level of the Git data. But only has to
be mounted on the Gitaly server.
NOTE: **Note:** While Gitaly can be used as a replacement for NFS, we do not recommend
using EFS as it may impact GitLab's performance. Please review the [relevant documentation](../high_availability/nfs.md#avoid-using-awss-elastic-file-system-efs)
NOTE: **Note:** While Gitaly can be used as a replacement for NFS, it's not recommended
to use EFS as it may impact GitLab's performance. Review the [relevant documentation](../high_availability/nfs.md#avoid-using-awss-elastic-file-system-efs)
for more details.
### Network architecture
- gitlab-rails shards repositories into "repository storages"
- `gitlab-rails/config/gitlab.yml` contains a map from storage names to
(Gitaly address, Gitaly token) pairs
The following list depicts what the network architecture of Gitaly is:
- GitLab Rails shards repositories into [repository storages](../repository_storage_paths.md).
- `/config/gitlab.yml` contains a map from storage names to
`(Gitaly address, Gitaly token)` pairs.
- the `storage name` -\> `(Gitaly address, Gitaly token)` map in
`gitlab.yml` is the single source of truth for the Gitaly network
topology
- a (Gitaly address, Gitaly token) corresponds to a Gitaly server
- a Gitaly server hosts one or more storages
`/config/gitlab.yml` is the single source of truth for the Gitaly network
topology.
- A `(Gitaly address, Gitaly token)` corresponds to a Gitaly server.
- A Gitaly server hosts one or more storages.
- Gitaly addresses must be specified in such a way that they resolve
correctly for ALL Gitaly clients
- Gitaly clients are: unicorn, sidekiq, gitlab-workhorse,
gitlab-shell, Elasticsearch Indexer, and Gitaly itself
- special case: a Gitaly server must be able to make RPC calls **to
itself** via its own (Gitaly address, Gitaly token) pair as
specified in `gitlab-rails/config/gitlab.yml`
- Gitaly servers must not be exposed to the public internet
Gitaly network traffic is unencrypted by default, but supports
[TLS](#tls-support). Authentication is done through a static token.
NOTE: **Note:** Gitaly network traffic is unencrypted so we recommend a firewall to
restrict access to your Gitaly server.
correctly for ALL Gitaly clients.
- Gitaly clients are: Unicorn, Sidekiq, gitlab-workhorse,
gitlab-shell, Elasticsearch Indexer, and Gitaly itself.
- A Gitaly server must be able to make RPC calls **to itself** via its own
`(Gitaly address, Gitaly token)` pair as specified in `/config/gitlab.yml`.
- Gitaly servers must not be exposed to the public internet as Gitaly's network
traffic is unencrypted by default. The use of firewall is highly recommended
to restrict access to the Gitaly server. Another option is to
[use TLS](#tls-support).
- Authentication is done through a static token which is shared among the Gitaly
and GitLab Rails nodes.
Below we describe how to configure a Gitaly server at address
`gitaly.internal:8075` with secret token `abc123secret`. We assume
your GitLab installation has two repository storages, `default` and
`storage1`.
### Installation
### 1. Installation
First install Gitaly using either Omnibus or from source.
First install Gitaly using either Omnibus GitLab or install it from source:
Omnibus: [Download/install](https://about.gitlab.com/install/) the Omnibus GitLab
package you want using **steps 1 and 2** from the GitLab downloads page but
**_do not_** provide the `EXTERNAL_URL=` value.
- For Omnibus GitLab: [Download/install](https://about.gitlab.com/install/) the Omnibus GitLab
package you want using **steps 1 and 2** from the GitLab downloads page but
**_do not_** provide the `EXTERNAL_URL=` value.
- From source: [Install Gitaly](../../install/installation.md#install-gitaly).
Source: [Install Gitaly](../../install/installation.md#install-gitaly)
### 2. Client side token configuration
### Client side token configuration
Configure a token on the instance that runs the GitLab Rails application.
Configure a token on the client side.
**For Omnibus GitLab**
Omnibus installations:
1. On the client node(s), edit `/etc/gitlab/gitlab.rb`:
```ruby
# /etc/gitlab/gitlab.rb
gitlab_rails['gitaly_token'] = 'abc123secret'
```
```ruby
gitlab_rails['gitaly_token'] = 'abc123secret'
```
Source installations:
1. Save the file and [reconfigure GitLab](../restart_gitlab.md#omnibus-gitlab-reconfigure).
```yaml
# /home/git/gitlab/config/gitlab.yml
gitlab:
**For installations from source**
1. On the client node(s), edit `/home/git/gitlab/config/gitlab.yml`:
```yaml
gitlab:
gitaly:
token: 'abc123secret'
```
```
You need to reconfigure (Omnibus) or restart (source) for these
changes to be picked up.
1. Save the file and [restart GitLab](../restart_gitlab.md#installations-from-source).
### Gitaly server configuration
### 3. Gitaly server configuration
Next, on the Gitaly server, we need to configure storage paths, enable
Next, on the Gitaly server, you need to configure storage paths, enable
the network listener and configure the token.
NOTE: **Note:** if you want to reduce the risk of downtime when you enable
......@@ -137,88 +129,99 @@ the Gitaly server. The easiest way to accomplish this is to copy `/etc/gitlab/gi
from an existing GitLab server to the Gitaly server. Without this shared secret,
Git operations in GitLab will result in an API error.
NOTE: **Note:** In most or all cases the storage paths below end in `/repositories` which is
different than `path` in `git_data_dirs` of Omnibus installations. Check the
directory layout on your Gitaly server to be sure.
Omnibus installations:
<!--
updates to following example must also be made at
https://gitlab.com/charts/gitlab/blob/master/doc/advanced/external-gitaly/external-omnibus-gitaly.md#configure-omnibus-gitlab
-->
```ruby
# /etc/gitlab/gitlab.rb
# Avoid running unnecessary services on the Gitaly server
postgresql['enable'] = false
redis['enable'] = false
nginx['enable'] = false
prometheus['enable'] = false
unicorn['enable'] = false
sidekiq['enable'] = false
gitlab_workhorse['enable'] = false
# Prevent database connections during 'gitlab-ctl reconfigure'
gitlab_rails['rake_cache_clear'] = false
gitlab_rails['auto_migrate'] = false
# Configure the gitlab-shell API callback URL. Without this, `git push` will
# fail. This can be your 'front door' GitLab URL or an internal load
# balancer.
# Don't forget to copy `/etc/gitlab/gitlab-secrets.json` from web server to Gitaly server.
gitlab_rails['internal_api_url'] = 'https://gitlab.example.com'
# Make Gitaly accept connections on all network interfaces. You must use
# firewalls to restrict access to this address/port.
gitaly['listen_addr'] = "0.0.0.0:8075"
gitaly['auth_token'] = 'abc123secret'
gitaly['storage'] = [
{ 'name' => 'default', 'path' => '/mnt/gitlab/default/repositories' },
{ 'name' => 'storage1', 'path' => '/mnt/gitlab/storage1/repositories' },
]
# To use TLS for Gitaly you need to add
gitaly['tls_listen_addr'] = "0.0.0.0:9999"
gitaly['certificate_path'] = "path/to/cert.pem"
gitaly['key_path'] = "path/to/key.pem"
```
NOTE: **Note:**
In most or all cases, the storage paths below end in `/repositories` which is
not that case with `path` in `git_data_dirs` of Omnibus GitLab installations.
Check the directory layout on your Gitaly server to be sure.
Source installations:
**For Omnibus GitLab**
```toml
# /home/git/gitaly/config.toml
listen_addr = '0.0.0.0:8075'
tls_listen_addr = '0.0.0.0:9999'
1. Edit `/etc/gitlab/gitlab.rb`:
[tls]
certificate_path = /path/to/cert.pem
key_path = /path/to/key.pem
<!--
updates to following example must also be made at
https://gitlab.com/charts/gitlab/blob/master/doc/advanced/external-gitaly/external-omnibus-gitaly.md#configure-omnibus-gitlab
-->
[auth]
token = 'abc123secret'
```ruby
# /etc/gitlab/gitlab.rb
[[storage]]
name = 'default'
path = '/mnt/gitlab/default/repositories'
# Avoid running unnecessary services on the Gitaly server
postgresql['enable'] = false
redis['enable'] = false
nginx['enable'] = false
prometheus['enable'] = false
unicorn['enable'] = false
sidekiq['enable'] = false
gitlab_workhorse['enable'] = false
[[storage]]
name = 'storage1'
path = '/mnt/gitlab/storage1/repositories'
```
# Prevent database connections during 'gitlab-ctl reconfigure'
gitlab_rails['rake_cache_clear'] = false
gitlab_rails['auto_migrate'] = false
# Configure the gitlab-shell API callback URL. Without this, `git push` will
# fail. This can be your 'front door' GitLab URL or an internal load
# balancer.
# Don't forget to copy `/etc/gitlab/gitlab-secrets.json` from web server to Gitaly server.
gitlab_rails['internal_api_url'] = 'https://gitlab.example.com'
# Make Gitaly accept connections on all network interfaces. You must use
# firewalls to restrict access to this address/port.
gitaly['listen_addr'] = "0.0.0.0:8075"
gitaly['auth_token'] = 'abc123secret'
gitaly['storage'] = [
{ 'name' => 'default' },
{ 'name' => 'storage1' },
]
# To use TLS for Gitaly you need to add
gitaly['tls_listen_addr'] = "0.0.0.0:9999"
gitaly['certificate_path'] = "path/to/cert.pem"
gitaly['key_path'] = "path/to/key.pem"
```
NOTE: **Note:**
In some cases, you'll have to set `path` for `gitaly['storage']` in the
format `'path' => '/mnt/gitlab/<storage name>/repositories'`.
1. Save the file and [reconfigure GitLab](../restart_gitlab.md#omnibus-gitlab-reconfigure).
**For installations from source**
1. On the client node(s), edit `/home/git/gitaly/config.toml`:
```toml
listen_addr = '0.0.0.0:8075'
tls_listen_addr = '0.0.0.0:9999'
[tls]
certificate_path = /path/to/cert.pem
key_path = /path/to/key.pem
[auth]
token = 'abc123secret'
[[storage]]
name = 'default'
[[storage]]
name = 'storage1'
```
Again, reconfigure (Omnibus) or restart (source).
NOTE: **Note:**
In some cases, you'll have to set `path` for each `[[storage]]` in the
format `path = '/mnt/gitlab/<storage name>/repositories'`.
### Converting clients to use the Gitaly server
1. Save the file and [restart GitLab](../restart_gitlab.md#installations-from-source).
Now as the final step update the client machines to switch from using
their local Gitaly service to the new Gitaly server you just
configured. This is a risky step because if there is any sort of
network, firewall, or name resolution problem preventing your GitLab
server from reaching the Gitaly server then all Gitaly requests will
fail.
### 4. Converting clients to use the Gitaly server
As the final step, you need to update the client machines to switch from using
their local Gitaly service to the new Gitaly server you just configured. This
is a risky step because if there is any sort of network, firewall, or name
resolution problem preventing your GitLab server from reaching the Gitaly server,
then all Gitaly requests will fail.
Additionally, you need to
[disable Rugged if previously manually enabled](../high_availability/nfs.md#improving-nfs-performance-with-gitlab).
......@@ -227,41 +230,93 @@ We assume that your Gitaly server can be reached at
`gitaly.internal:8075` from your GitLab server, and that Gitaly can read and
write to `/mnt/gitlab/default` and `/mnt/gitlab/storage1` respectively.
Omnibus installations:
**For Omnibus GitLab**
1. Edit `/etc/gitlab/gitlab.rb`:
```ruby
# /etc/gitlab/gitlab.rb
git_data_dirs({
```ruby
git_data_dirs({
'default' => { 'gitaly_address' => 'tcp://gitaly.internal:8075' },
'storage1' => { 'gitaly_address' => 'tcp://gitaly.internal:8075' },
})
})
gitlab_rails['gitaly_token'] = 'abc123secret'
```
gitlab_rails['gitaly_token'] = 'abc123secret'
```
NOTE: **Note:**
In some cases, you'll have to set `path` for each `git_data_dirs` in the
format `'path' => '/mnt/gitlab/<storage name>'`.
Source installations:
1. Save the file and [reconfigure GitLab](../restart_gitlab.md#omnibus-gitlab-reconfigure).
1. Tail the logs to see the requests:
```yaml
# /home/git/gitlab/config/gitlab.yml
gitlab:
```sh
sudo gitlab-ctl tail gitaly
```
**For installations from source**
1. Edit `/home/git/gitlab/config/gitlab.yml`:
```yaml
gitlab:
repositories:
storages:
default:
path: /mnt/gitlab/default/repositories
gitaly_address: tcp://gitaly.internal:8075
storage1:
path: /mnt/gitlab/storage1/repositories
gitaly_address: tcp://gitaly.internal:8075
gitaly:
token: 'abc123secret'
```
```
NOTE: **Note:**
In some cases, you'll have to set `path` for each of the `storages` in the
format `path: /mnt/gitlab/<storage name>/repositories`.
1. Save the file and [restart GitLab](../restart_gitlab.md#installations-from-source).
1. Tail the logs to see the requests:
```sh
tail -f /home/git/gitlab/log/gitaly.log
```
When you tail the Gitaly logs on your Gitaly server you should see requests
coming in. One sure way to trigger a Gitaly request is to clone a repository
from your GitLab server over HTTP.
### Disabling the Gitaly service in a cluster environment
If you are running Gitaly [as a remote
service](#running-gitaly-on-its-own-server) you may want to disable
the local Gitaly service that runs on your GitLab server by default.
Disabling Gitaly only makes sense when you run GitLab in a custom
cluster configuration, where different services run on different
machines. Disabling Gitaly on all machines in the cluster is not a
valid configuration.
To disable Gitaly on a client node:
**For Omnibus GitLab**
1. Edit `/etc/gitlab/gitlab.rb`:
Now reconfigure (Omnibus) or restart (source). When you tail the
Gitaly logs on your Gitaly server (`sudo gitlab-ctl tail gitaly` or
`tail -f /home/git/gitlab/log/gitaly.log`) you should see requests
coming in. One sure way to trigger a Gitaly request is to clone a
repository from your GitLab server over HTTP.
```ruby
gitaly['enable'] = false
```
1. Save the file and [reconfigure GitLab](../restart_gitlab.md#omnibus-gitlab-reconfigure).
**For installations from source**
1. Edit `/etc/default/gitlab`:
```shell
gitaly_enabled=false
```
1. Save the file and [restart GitLab](../restart_gitlab.md#installations-from-source).
## TLS support
......@@ -271,168 +326,128 @@ Gitaly supports TLS encryption. To be able to communicate
with a Gitaly instance that listens for secure connections you will need to use `tls://` url
scheme in the `gitaly_address` of the corresponding storage entry in the GitLab configuration.
The admin needs to bring their own certificate as we do not provide that automatically.
The certificate to be used needs to be installed on all Gitaly nodes and on all client nodes that communicate with it following procedures described in [GitLab custom certificate configuration](https://docs.gitlab.com/omnibus/settings/ssl.html#install-custom-public-certificates).
You will need to bring your own certificates as this isn't provided automatically.
The certificate to be used needs to be installed on all Gitaly nodes and on all
client nodes that communicate with it following the procedure described in
[GitLab custom certificate configuration](https://docs.gitlab.com/omnibus/settings/ssl.html#install-custom-public-certificates).
Note that it is possible to configure Gitaly servers with both an
NOTE: **Note:**
It is possible to configure Gitaly servers with both an
unencrypted listening address `listen_addr` and an encrypted listening
address `tls_listen_addr` at the same time. This allows you to do a
gradual transition from unencrypted to encrypted traffic, if necessary.
To observe what type of connections are actually being used in a
production environment you can use the following Prometheus query:
```
sum(rate(gitaly_connections_total[5m])) by (type)
```
### Example TLS configuration
To configure Gitaly with TLS:
### Omnibus installations:
**For Omnibus GitLab**
#### On client nodes:
1. On the client nodes, edit `/etc/gitlab/gitlab.rb`:
```ruby
# /etc/gitlab/gitlab.rb
git_data_dirs({
```ruby
git_data_dirs({
'default' => { 'gitaly_address' => 'tls://gitaly.internal:9999' },
'storage1' => { 'gitaly_address' => 'tls://gitaly.internal:9999' },
})
})
gitlab_rails['gitaly_token'] = 'abc123secret'
```
gitlab_rails['gitaly_token'] = 'abc123secret'
```
#### On Gitaly server nodes:
1. Save the file and [reconfigure GitLab](../restart_gitlab.md#omnibus-gitlab-reconfigure).
1. On the Gitaly server nodes, edit `/etc/gitlab/gitlab.rb`:
```ruby
gitaly['tls_listen_addr'] = "0.0.0.0:9999"
gitaly['certificate_path'] = "path/to/cert.pem"
gitaly['key_path'] = "path/to/key.pem"
```
```ruby
gitaly['tls_listen_addr'] = "0.0.0.0:9999"
gitaly['certificate_path'] = "path/to/cert.pem"
gitaly['key_path'] = "path/to/key.pem"
```
1. Save the file and [reconfigure GitLab](../restart_gitlab.md#omnibus-gitlab-reconfigure).
### Source installations:
**For installations from source**
#### On client nodes:
1. On the client nodes, edit `/home/git/gitlab/config/gitlab.yml`:
```yaml
# /home/git/gitlab/config/gitlab.yml
gitlab:
```yaml
gitlab:
repositories:
storages:
default:
path: /mnt/gitlab/default/repositories
gitaly_address: tls://gitaly.internal:9999
storage1:
path: /mnt/gitlab/storage1/repositories
gitaly_address: tls://gitaly.internal:9999
gitaly:
token: 'abc123secret'
```
#### On Gitaly server nodes:
```
```toml
# /home/git/gitaly/config.toml
tls_listen_addr = '0.0.0.0:9999'
[tls]
certificate_path = '/path/to/cert.pem'
key_path = '/path/to/key.pem'
```
NOTE: **Note:**
In some cases, you'll have to set `path` for each of the `storages` in the
format `path: /mnt/gitlab/<storage name>/repositories`.
## Gitaly-ruby
Gitaly was developed to replace Ruby application code in gitlab-ce/ee.
In order to save time and/or avoid the risk of rewriting existing
application logic, in some cases we chose to copy some application code
from gitlab-ce into Gitaly almost as-is. To be able to run that code, we
made gitaly-ruby, which is a sidecar process for the main Gitaly Go
process. Some examples of things that are implemented in gitaly-ruby are
RPC's that deal with wiki's, and RPC's that create commits on behalf of
a user, such as merge commits.
1. Save the file and [restart GitLab](../restart_gitlab.md#installations-from-source).
1. On the Gitaly server nodes, edit `/home/git/gitaly/config.toml`:
### Number of gitaly-ruby workers
```toml
tls_listen_addr = '0.0.0.0:9999'
Gitaly-ruby has much less capacity than Gitaly itself. If your Gitaly
server has to handle a lot of request, the default setting of having
just 1 active gitaly-ruby sidecar might not be enough. If you see
ResourceExhausted errors from Gitaly it's very likely that you have not
enough gitaly-ruby capacity.
[tls]
certificate_path = '/path/to/cert.pem'
key_path = '/path/to/key.pem'
```
You can increase the number of gitaly-ruby processes on your Gitaly
server with the following settings.
1. Save the file and [restart GitLab](../restart_gitlab.md#installations-from-source).
Omnibus:
To observe what type of connections are actually being used in a
production environment you can use the following Prometheus query:
```ruby
# /etc/gitlab/gitlab.rb
# Default is 2 workers. The minimum is 2; 1 worker is always reserved as
# a passive stand-by.
gitaly['ruby_num_workers'] = 4
```
Source:
```toml
# /home/git/gitaly/config.toml
[gitaly-ruby]
num_workers = 4
sum(rate(gitaly_connections_total[5m])) by (type)
```
### Observing gitaly-ruby traffic
Gitaly-ruby is a somewhat hidden, internal implementation detail of
Gitaly. There is not that much visibility into what goes on inside
gitaly-ruby processes.
## `gitaly-ruby`
If you have Prometheus set up to scrape your Gitaly process, you can see
request rates and error codes for individual RPC's in gitaly-ruby by
querying `grpc_client_handled_total`. Strictly speaking this metric does
not differentiate between gitaly-ruby and other RPC's, but in practice
(as of GitLab 11.9), all gRPC calls made by Gitaly itself are internal
calls from the main Gitaly process to one of its gitaly-ruby sidecars.
Gitaly was developed to replace the Ruby application code in GitLab.
In order to save time and/or avoid the risk of rewriting existing
application logic, in some cases we chose to copy some application code
from GitLab into Gitaly almost as-is. To be able to run that code,
`gitaly-ruby` was created, which is a "sidecar" process for the main Gitaly Go
process. Some examples of things that are implemented in `gitaly-ruby` are
RPCs that deal with wikis, and RPCs that create commits on behalf of
a user, such as merge commits.
Assuming your `grpc_client_handled_total` counter only observes Gitaly,
the following query shows you RPC's are (most likely) internally
implemented as calls to gitaly-ruby.
### Number of `gitaly-ruby` workers
```
sum(rate(grpc_client_handled_total[5m])) by (grpc_method) > 0
```
`gitaly-ruby` has much less capacity than Gitaly itself. If your Gitaly
server has to handle a lot of requests, the default setting of having
just one active `gitaly-ruby` sidecar might not be enough. If you see
`ResourceExhausted` errors from Gitaly, it's very likely that you have not
enough `gitaly-ruby` capacity.
## Disabling or enabling the Gitaly service in a cluster environment
You can increase the number of `gitaly-ruby` processes on your Gitaly
server with the following settings.
If you are running Gitaly [as a remote
service](#running-gitaly-on-its-own-server) you may want to disable
the local Gitaly service that runs on your GitLab server by default.
**For Omnibus GitLab**
> 'Disabling Gitaly' only makes sense when you run GitLab in a custom
cluster configuration, where different services run on different
machines. Disabling Gitaly on all machines in the cluster is not a
valid configuration.
1. Edit `/etc/gitlab/gitlab.rb`:
If you are setting up a GitLab cluster where Gitaly does not need to
run on all machines, you can disable the Gitaly service in your
Omnibus installation, add the following line to `/etc/gitlab/gitlab.rb`:
```ruby
# Default is 2 workers. The minimum is 2; 1 worker is always reserved as
# a passive stand-by.
gitaly['ruby_num_workers'] = 4
```
```ruby
gitaly['enable'] = false
```
1. Save the file and [reconfigure GitLab](../restart_gitlab.md#omnibus-gitlab-reconfigure).
When you run `gitlab-ctl reconfigure` the Gitaly service will be
disabled.
**For installations from source**
To disable the Gitaly service in a GitLab cluster where you installed
GitLab from source, add the following to `/etc/default/gitlab` on the
machine where you want to disable Gitaly.
1. Edit `/home/git/gitaly/config.toml`:
```shell
gitaly_enabled=false
```
```toml
[gitaly-ruby]
num_workers = 4
```
When you run `service gitlab restart` Gitaly will be disabled on this
particular machine.
1. Save the file and [restart GitLab](../restart_gitlab.md#installations-from-source).
## Eliminating NFS altogether
......@@ -440,19 +455,23 @@ If you are planning to use Gitaly without NFS for your storage needs
and want to eliminate NFS from your environment altogether, there are
a few things that you need to do:
1. Make sure the [`git` user home directory](https://docs.gitlab.com/omnibus/settings/configuration.html#moving-the-home-directory-for-a-user) is on local disk.
1. Configure [database lookup of SSH keys](../operations/fast_ssh_key_lookup.md)
1. Make sure the [`git` user home directory](https://docs.gitlab.com/omnibus/settings/configuration.html#moving-the-home-directory-for-a-user) is on local disk.
1. Configure [database lookup of SSH keys](../operations/fast_ssh_key_lookup.md)
to eliminate the need for a shared authorized_keys file.
1. Configure [object storage for job artifacts](../job_artifacts.md#using-object-storage)
1. Configure [object storage for job artifacts](../job_artifacts.md#using-object-storage)
including [live tracing](../job_traces.md#new-live-trace-architecture).
1. Configure [object storage for LFS objects](../../workflow/lfs/lfs_administration.md#storing-lfs-objects-in-remote-object-storage).
1. Configure [object storage for uploads](../uploads.md#using-object-storage-core-only).
1. Configure [object storage for LFS objects](../../workflow/lfs/lfs_administration.md#storing-lfs-objects-in-remote-object-storage).
1. Configure [object storage for uploads](../uploads.md#using-object-storage-core-only).
NOTE: **Note:** One current feature of GitLab still requires a shared directory (NFS): [GitLab Pages](../../user/project/pages/index.md).
NOTE: **Note:**
One current feature of GitLab that still requires a shared directory (NFS) is
[GitLab Pages](../../user/project/pages/index.md).
There is [work in progress](https://gitlab.com/gitlab-org/gitlab-pages/issues/196)
to eliminate the need for NFS to support GitLab Pages.
## Troubleshooting Gitaly in production
## Troubleshooting
### `gitaly-debug`
Since GitLab 11.6, Gitaly comes with a command-line tool called
`gitaly-debug` that can be run on a Gitaly server to aid in
......@@ -462,3 +481,32 @@ Git clone speed for a specific repository on the server.
For an up to date list of sub-commands see [the gitaly-debug
README](https://gitlab.com/gitlab-org/gitaly/blob/master/cmd/gitaly-debug/README.md).
### Client side GRPC logs
Gitaly uses the [gRPC](https://grpc.io/) RPC framework. The Ruby gRPC
client has its own log file which may contain useful information when
you are seeing Gitaly errors. You can control the log level of the
gRPC client with the `GRPC_LOG_LEVEL` environment variable. The
default level is `WARN`.
### Observing `gitaly-ruby` traffic
[`gitaly-ruby`](#gitaly-ruby) is an internal implementation detail of Gitaly,
so, there's not that much visibility into what goes on inside
`gitaly-ruby` processes.
If you have Prometheus set up to scrape your Gitaly process, you can see
request rates and error codes for individual RPCs in `gitaly-ruby` by
querying `grpc_client_handled_total`. Strictly speaking, this metric does
not differentiate between `gitaly-ruby` and other RPCs, but in practice
(as of GitLab 11.9), all gRPC calls made by Gitaly itself are internal
calls from the main Gitaly process to one of its `gitaly-ruby` sidecars.
Assuming your `grpc_client_handled_total` counter only observes Gitaly,
the following query shows you RPCs are (most likely) internally
implemented as calls to `gitaly-ruby`:
```
sum(rate(grpc_client_handled_total[5m])) by (grpc_method) > 0
```
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7