• Marcel Holtmann's avatar
    Bluetooth: btusb: Add support for latest Apple controllers · 22f8e9db
    Marcel Holtmann authored
    The latest Apple Bluetooth controllers with Broadcom chip in it have
    a small design change. Instead of including a USB hub with mouse and
    keyboard devices, they are now HID interfaces on the same device.
    
    T:  Bus=04 Lev=02 Prnt=02 Port=04 Cnt=01 Dev#= 39 Spd=12   MxCh= 0
    D:  Ver= 2.01 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
    P:  Vendor=05ac ProdID=8290 Rev= 0.79
    S:  Manufacturer=Broadcom Corp.
    S:  Product=Bluetooth USB Host Controller
    C:* #Ifs= 6 Cfg#= 1 Atr=e0 MxPwr=  0mA
    A:  FirstIf#= 2 IfCount= 4 Cls=ff(vend.) Sub=01 Prot=01
    I:* If#= 0 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=01 Prot=01 Driver=usbhid
    E:  Ad=85(I) Atr=03(Int.) MxPS=   8 Ivl=10ms
    I:* If#= 1 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=01 Prot=02 Driver=usbhid
    E:  Ad=86(I) Atr=03(Int.) MxPS=   8 Ivl=10ms
    I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
    E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
    E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
    E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
    I:* If#= 3 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
    E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
    E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
    I:  If#= 3 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
    E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
    E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
    I:  If#= 3 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
    E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
    E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
    I:  If#= 3 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
    E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
    E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
    I:  If#= 3 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
    E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
    E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
    I:  If#= 3 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
    E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
    E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
    I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=btusb
    E:  Ad=84(I) Atr=02(Bulk) MxPS=  32 Ivl=0ms
    E:  Ad=04(O) Atr=02(Bulk) MxPS=  32 Ivl=0ms
    I:* If#= 5 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none)
    
    The general layout of Bluetooth devices is that interface 0 is the main
    interface and interface 1 is for audio data. This design obviously moves
    it to main interface 2 and audio data on interface 3.
    
    Starting with the MacBookPro12,1 (early 2015 models) the new Broadcom
    BCM943602CS cards are used which show this interface layout.
    
    usb 4-1.5: New USB device found, idVendor=05ac, idProduct=8290
    usb 4-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
    usb 4-1.5: Product: Bluetooth USB Host Controller
    usb 4-1.5: Manufacturer: Broadcom Corp.
    Bluetooth: hci0: BCM: chip id 102 build 0243
    Bluetooth: hci0: BCM: product 05ac:8290
    Bluetooth: hci0: BCM20703A1 Generic USB UHE Apple 20Mhz fcbga_X87
    Signed-off-by: default avatarMarcel Holtmann <marcel@holtmann.org>
    Signed-off-by: default avatarJohan Hedberg <johan.hedberg@intel.com>
    22f8e9db
btusb.c 82.4 KB