When a Core/Global/IMP reset occurs, the hardware sets the reset status
register of all PF/VF and reports a reset interrupt to all PF/VF and
firmware.

When receiving the reset interrupt:
1. The firmware will wait for 100 ms before resetting the hardware and
   clear the reset status register of all PF when hardware reset is done.
2. The PF/VF driver needs to down the netdev within 100 ms and then wait
   for hardware reset to finish.
3. After firmware clearing the reset status register of all PF, the PF
   driver reinitializes the hardware and clear the reset status register
   of it's VF.
4. After PF driver clearing the reset status register of VF, the VF driver
   reinitializes the hardware.

This patch mainly add handling for the step 4.
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>