hwmon: (gpio-fan) Remove un-necessary speed_index lookup for thermal hook

Thermal hook gpio_fan_get_cur_state is only interested in knowing
the current speed index that was setup in the system, this is
already available as part of fan_data->speed_index which is always
set by set_fan_speed. Using get_fan_speed_index is useful when we
have no idea about the fan speed configuration (for example during
fan_ctrl_init).

When thermal framework invokes
gpio_fan_get_cur_state=>get_fan_speed_index via gpio_fan_get_cur_state
especially in a polled configuration for thermal governor, we
basically hog the i2c interface to the extent that other functions
fail to get any traffic out :(.

Instead, just provide the last state set in the driver - since the gpio
fan driver is responsible for the fan state immaterial of override, the
fan_data->speed_index should accurately reflect the state.

Fixes: b5cf88e4 ("(gpio-fan): Add thermal control hooks")
Reported-by: Tony Lindgren <tony@atomide.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Eduardo Valentin <edubezval@gmail.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Cc: stable@vger.kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

drivers/hwmon/gpio-fan.c

@@ -406,16 +406,11 @@ static int gpio_fan_get_cur_state(struct thermal_cooling_device *cdev,
 				  unsigned long *state)
 {
 	struct gpio_fan_data *fan_data = cdev->devdata;
-	int r;
 
 	if (!fan_data)
 		return -EINVAL;
 
-	r = get_fan_speed_index(fan_data);
-	if (r < 0)
-		return r;
-
-	*state = r;
+	*state = fan_data->speed_index;
 	return 0;
 }