Merge; remove pci_socket.o from export-objs, add sa1100_pcmcia.o

arch/arm/Makefile

@@ -123,6 +123,10 @@ endif
 MACHINE		 = sa1100
 endif
 
+ifeq ($(CONFIG_ARCH_PXA),y)
+MACHINE		 = pxa
+endif
+
 ifeq ($(CONFIG_ARCH_L7200),y)
 MACHINE		 = l7200
 endif

arch/arm/boot/Makefile

@@ -87,6 +87,10 @@ ifeq ($(CONFIG_SA1111),y)
 endif
 endif
 
+ifeq ($(CONFIG_ARCH_PXA),y)
+ZRELADDR	 = 0xa0008000
+endif
+
 ifeq ($(CONFIG_ARCH_ANAKIN),y)
 ZRELADDR	 = 0x20008000
 endif

arch/arm/config.in

@@ -26,6 +26,7 @@ choice 'ARM system type' \
 	 Cirrus-CL-PS7500FE     CONFIG_ARCH_CLPS7500 \
  	 CLPS711x/EP721x-based	CONFIG_ARCH_CLPS711X \
 	 Co-EBSA285		CONFIG_ARCH_CO285 \
+	 PXA250/210-based	CONFIG_ARCH_PXA \
 	 EBSA-110		CONFIG_ARCH_EBSA110 \
  	 Epxa10db               CONFIG_ARCH_CAMELOT \
 	 FootBridge		CONFIG_ARCH_FOOTBRIDGE \
@@ -125,6 +126,16 @@ dep_tristate '  Support for SA11x0 USB character device emulation' CONFIG_SA1100
 dep_tristate 'Compaq iPAQ Handheld sleeve support' CONFIG_H3600_SLEEVE $CONFIG_SA1100_H3600
 endmenu
 
+mainmenu_option next_comment
+comment 'Intel PXA250/210 Implementations'
+dep_bool '  Intel DBPXA250 Development Platform' CONFIG_ARCH_LUBBOCK $CONFIG_ARCH_PXA
+dep_bool '  Accelent Xscale IDP' CONFIG_ARCH_PXA_IDP $CONFIG_ARCH_PXA
+
+if [ "$CONFIG_ARCH_LUBBOCK" = "y" ]; then
+   define_bool CONFIG_SA1111 y
+fi
+endmenu
+
 mainmenu_option next_comment
 comment 'CLPS711X/EP721X Implementations'
 dep_bool '  AUTCPU12' CONFIG_ARCH_AUTCPU12 $CONFIG_ARCH_CLPS711X
@@ -227,7 +238,9 @@ if [ "$CONFIG_ARCH_EBSA110"    = "y" -o "$CONFIG_FOOTBRIDGE"    = "y" -o \
 else
    define_bool CONFIG_CPU_32v4 n
 fi
-if [ "$CONFIG_ARCH_IOP310" = "y" -o "$CONFIG_ARCH_ADIFCC" = "y" ]; then
+if [ "$CONFIG_ARCH_IOP310" = "y" -o \
+     "$CONFIG_ARCH_ADIFCC" = "y" -o \
+     "$CONFIG_ARCH_PXA" = "y" ]; then
    define_bool CONFIG_CPU_32v5 y
 else
    define_bool CONFIG_CPU_32v5 n
@@ -317,7 +330,9 @@ else
 fi
 
 # XScale
-if [ "$CONFIG_ARCH_IOP310" = "y" -o "$CONFIG_ARCH_ADIFCC" = "y" ]; then
+if [ "$CONFIG_ARCH_IOP310" = "y" -o \
+     "$CONFIG_ARCH_ADIFCC" = "y" -o \
+     "$CONFIG_ARCH_PXA" = "y" ]; then
    define_bool CONFIG_CPU_XSCALE y
 else
    define_bool CONFIG_CPU_XSCALE n
@@ -467,6 +482,8 @@ if [ "$CONFIG_ARCH_NETWINDER" = "y" -o  \
      "$CONFIG_ARCH_SHARK" = "y" -o      \
      "$CONFIG_ARCH_CO285" = "y" -o      \
      "$CONFIG_ARCH_SA1100" = "y" -o     \
+     "$CONFIG_ARCH_LUBBOCK" = "y" -o    \
+     "$CONFIG_ARCH_PXA_IDP" = "y" -o \
      "$CONFIG_ARCH_INTEGRATOR" = "y" -o \
      "$CONFIG_ARCH_CDB89712" = "y" -o   \
      "$CONFIG_ARCH_P720T" = "y" ]; then
@@ -477,6 +494,8 @@ if [ "$CONFIG_ARCH_NETWINDER" = "y" -o  \
 	   "$CONFIG_ARCH_SHARK" = "y" -o      \
 	   "$CONFIG_ARCH_CO285" = "y" -o      \
 	   "$CONFIG_ARCH_SA1100" = "y" -o     \
+          "$CONFIG_ARCH_LUBBOCK" = "y" -o    \
+	   "$CONFIG_ARCH_PXA_IDP" = "y" -o    \
            "$CONFIG_ARCH_INTEGRATOR" = "y" -o \
 	   "$CONFIG_ARCH_P720T" = "y" ]; then
          bool '  Timer LED' CONFIG_LEDS_TIMER

arch/arm/def-configs/lubbock

+#
+# Automatically generated make config: don't edit
+#
+CONFIG_ARM=y
+# CONFIG_EISA is not set
+# CONFIG_SBUS is not set
+# CONFIG_MCA is not set
+CONFIG_UID16=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
+# CONFIG_GENERIC_BUST_SPINLOCK is not set
+# CONFIG_GENERIC_ISA_DMA is not set
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+
+#
+# General setup
+#
+CONFIG_NET=y
+CONFIG_SYSVIPC=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_KMOD is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_ADIFCC is not set
+# CONFIG_ARCH_ANAKIN is not set
+# CONFIG_ARCH_ARCA5K is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+CONFIG_ARCH_PXA=y
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_CAMELOT is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_IOP310 is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_SHARK is not set
+
+#
+# Archimedes/A5000 Implementations
+#
+
+#
+# Archimedes/A5000 Implementations (select only ONE)
+#
+# CONFIG_ARCH_ARC is not set
+# CONFIG_ARCH_A5K is not set
+
+#
+# Footbridge Implementations
+#
+# CONFIG_ARCH_CATS is not set
+# CONFIG_ARCH_PERSONAL_SERVER is not set
+# CONFIG_ARCH_EBSA285_ADDIN is not set
+# CONFIG_ARCH_EBSA285_HOST is not set
+# CONFIG_ARCH_NETWINDER is not set
+
+#
+# SA11x0 Implementations
+#
+# CONFIG_SA1100_ASSABET is not set
+# CONFIG_ASSABET_NEPONSET is not set
+# CONFIG_SA1100_ADSBITSY is not set
+# CONFIG_SA1100_BRUTUS is not set
+# CONFIG_SA1100_CERF is not set
+# CONFIG_SA1100_H3100 is not set
+# CONFIG_SA1100_H3600 is not set
+# CONFIG_SA1100_H3800 is not set
+# CONFIG_SA1100_H3XXX is not set
+# CONFIG_SA1100_EXTENEX1 is not set
+# CONFIG_SA1100_FLEXANET is not set
+# CONFIG_SA1100_FREEBIRD is not set
+# CONFIG_SA1100_GRAPHICSCLIENT is not set
+# CONFIG_SA1100_GRAPHICSMASTER is not set
+# CONFIG_SA1100_BADGE4 is not set
+# CONFIG_SA1100_JORNADA720 is not set
+# CONFIG_SA1100_HUW_WEBPANEL is not set
+# CONFIG_SA1100_ITSY is not set
+# CONFIG_SA1100_LART is not set
+# CONFIG_SA1100_NANOENGINE is not set
+# CONFIG_SA1100_OMNIMETER is not set
+# CONFIG_SA1100_PANGOLIN is not set
+# CONFIG_SA1100_PLEB is not set
+# CONFIG_SA1100_PT_SYSTEM3 is not set
+# CONFIG_SA1100_SHANNON is not set
+# CONFIG_SA1100_SHERMAN is not set
+# CONFIG_SA1100_SIMPAD is not set
+# CONFIG_SA1100_PFS168 is not set
+# CONFIG_SA1100_VICTOR is not set
+# CONFIG_SA1100_XP860 is not set
+# CONFIG_SA1100_YOPY is not set
+# CONFIG_SA1100_STORK is not set
+# CONFIG_SA1100_USB is not set
+# CONFIG_SA1100_USB_NETLINK is not set
+# CONFIG_SA1100_USB_CHAR is not set
+# CONFIG_H3600_SLEEVE is not set
+
+#
+# Intel PXA250/210 Implementations
+#
+CONFIG_ARCH_LUBBOCK=y
+# CONFIG_ARCH_PXA_IDP is not set
+CONFIG_SA1111=y
+
+#
+# CLPS711X/EP721X Implementations
+#
+# CONFIG_ARCH_AUTCPU12 is not set
+# CONFIG_ARCH_CDB89712 is not set
+# CONFIG_ARCH_CLEP7312 is not set
+# CONFIG_ARCH_EDB7211 is not set
+# CONFIG_ARCH_P720T is not set
+# CONFIG_ARCH_FORTUNET is not set
+# CONFIG_ARCH_EP7211 is not set
+# CONFIG_ARCH_EP7212 is not set
+
+#
+# IOP310 Implementation Options
+#
+# CONFIG_ARCH_IQ80310 is not set
+
+#
+# IOP310 Chipset Features
+#
+# CONFIG_IOP310_AAU is not set
+# CONFIG_IOP310_DMA is not set
+# CONFIG_IOP310_MU is not set
+# CONFIG_IOP310_PMON is not set
+# CONFIG_ARCH_ACORN is not set
+# CONFIG_FOOTBRIDGE is not set
+# CONFIG_FOOTBRIDGE_HOST is not set
+# CONFIG_FOOTBRIDGE_ADDIN is not set
+CONFIG_CPU_32=y
+# CONFIG_CPU_26 is not set
+
+#
+# Processor Type
+#
+# CONFIG_CPU_32v3 is not set
+# CONFIG_CPU_32v4 is not set
+CONFIG_CPU_32v5=y
+# CONFIG_CPU_ARM610 is not set
+# CONFIG_CPU_ARM710 is not set
+# CONFIG_CPU_ARM720T is not set
+# CONFIG_CPU_ARM920T is not set
+# CONFIG_CPU_ARM922T is not set
+# CONFIG_CPU_ARM926T is not set
+# CONFIG_CPU_ARM1020 is not set
+# CONFIG_CPU_SA110 is not set
+# CONFIG_CPU_SA1100 is not set
+CONFIG_CPU_XSCALE=y
+CONFIG_XSCALE_CACHE_ERRATA=y
+CONFIG_XSCALE_PMU=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+
+#
+# General setup
+#
+# CONFIG_DISCONTIGMEM is not set
+# CONFIG_PCI is not set
+# CONFIG_ISA is not set
+# CONFIG_ISA_DMA is not set
+# CONFIG_FIQ is not set
+# CONFIG_ZBOOT_ROM is not set
+CONFIG_ZBOOT_ROM_TEXT=0
+CONFIG_ZBOOT_ROM_BSS=0
+CONFIG_HOTPLUG=y
+
+#
+# PCMCIA/CardBus support
+#
+CONFIG_PCMCIA=y
+CONFIG_PCMCIA_PROBE=y
+# CONFIG_I82092 is not set
+# CONFIG_I82365 is not set
+# CONFIG_TCIC is not set
+# CONFIG_PCMCIA_CLPS6700 is not set
+# CONFIG_PCMCIA_SA1100 is not set
+CONFIG_PCMCIA_PXA=y
+
+#
+# At least one math emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_FASTFPE is not set
+CONFIG_KCORE_ELF=y
+# CONFIG_KCORE_AOUT is not set
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_PM is not set
+# CONFIG_PREEMPT is not set
+# CONFIG_APM is not set
+# CONFIG_ARTHUR is not set
+CONFIG_CMDLINE="root=/dev/nfs ip=bootp console=ttyS0,115200 mem=64M"
+CONFIG_LEDS=y
+CONFIG_LEDS_TIMER=y
+CONFIG_LEDS_CPU=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_REDBOOT_PARTS=y
+# CONFIG_MTD_BOOTLDR_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+# CONFIG_MTD_CFI_B1 is not set
+# CONFIG_MTD_CFI_B2 is not set
+CONFIG_MTD_CFI_B4=y
+# CONFIG_MTD_CFI_I1 is not set
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
+# CONFIG_MTD_AMDSTD is not set
+# CONFIG_MTD_SHARP is not set
+# CONFIG_MTD_JEDEC is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_NORA is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_CDB89712 is not set
+# CONFIG_MTD_SA1100 is not set
+# CONFIG_MTD_2PARTS_IPAQ is not set
+# CONFIG_MTD_DC21285 is not set
+# CONFIG_MTD_IQ80310 is not set
+CONFIG_MTD_LUBBOCK=y
+# CONFIG_MTD_EPXA10DB is not set
+# CONFIG_MTD_FORTUNET is not set
+# CONFIG_MTD_PCI is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLKMTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC1000 is not set
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOCPROBE is not set
+
+#
+# NAND Flash Device Drivers
+#
+# CONFIG_MTD_NAND is not set
+
+#
+# Plug and Play configuration
+#
+# CONFIG_PNP is not set
+# CONFIG_ISAPNP is not set
+# CONFIG_PNPBIOS is not set
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_DEV_XD is not set
+# CONFIG_PARIDE is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_CISS_SCSI_TAPE is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_BLK_DEV_INITRD is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+# CONFIG_BLK_DEV_MD is not set
+# CONFIG_MD_LINEAR is not set
+# CONFIG_MD_RAID0 is not set
+# CONFIG_MD_RAID1 is not set
+# CONFIG_MD_RAID5 is not set
+# CONFIG_MD_MULTIPATH is not set
+# CONFIG_BLK_DEV_LVM is not set
+
+#
+# Networking options
+#
+# CONFIG_PACKET is not set
+# CONFIG_NETLINK_DEV is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_FILTER is not set
+CONFIG_UNIX=y
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_INET_ECN is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_IPV6 is not set
+# CONFIG_KHTTPD is not set
+# CONFIG_ATM is not set
+# CONFIG_VLAN_8021Q is not set
+
+#
+#
+#
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+
+#
+# Appletalk devices
+#
+# CONFIG_DEV_APPLETALK is not set
+# CONFIG_DECNET is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_LLC is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_FASTROUTE is not set
+# CONFIG_NET_HW_FLOWCONTROL is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_ETHERTAP is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+# CONFIG_ARM_AM79C961A is not set
+# CONFIG_SUNLANCE is not set
+# CONFIG_SUNBMAC is not set
+# CONFIG_SUNQE is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_LANCE is not set
+CONFIG_NET_VENDOR_SMC=y
+# CONFIG_WD80x3 is not set
+# CONFIG_ULTRAMCA is not set
+# CONFIG_ULTRA is not set
+# CONFIG_ULTRA32 is not set
+CONFIG_SMC9194=y
+# CONFIG_NET_VENDOR_RACAL is not set
+# CONFIG_NET_ISA is not set
+# CONFIG_NET_PCI is not set
+# CONFIG_NET_POCKET is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_MYRI_SBUS is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PLIP is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
+# CONFIG_NET_FC is not set
+# CONFIG_RCPCI is not set
+# CONFIG_SHAPER is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+
+#
+# Tulip family network device support
+#
+# CONFIG_NET_TULIP is not set
+
+#
+# PCMCIA network device support
+#
+CONFIG_NET_PCMCIA=y
+# CONFIG_PCMCIA_3C589 is not set
+# CONFIG_PCMCIA_3C574 is not set
+# CONFIG_PCMCIA_FMVJ18X is not set
+CONFIG_PCMCIA_PCNET=y
+# CONFIG_PCMCIA_NMCLAN is not set
+# CONFIG_PCMCIA_SMC91C92 is not set
+# CONFIG_PCMCIA_XIRC2PS is not set
+# CONFIG_PCMCIA_AXNET is not set
+# CONFIG_ARCNET_COM20020_CS is not set
+# CONFIG_PCMCIA_IBMTR is not set
+# CONFIG_NET_PCMCIA_RADIO is not set
+
+#
+# Amateur Radio support
+#
+# CONFIG_HAMRADIO is not set
+
+#
+# IrDA (infrared) support
+#
+# CONFIG_IRDA is not set
+
+#
+# ATA/IDE/MFM/RLL support
+#
+# CONFIG_IDE is not set
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI support
+#
+# CONFIG_SCSI is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+# CONFIG_I2O_BLOCK is not set
+# CONFIG_I2O_LAN is not set
+# CONFIG_I2O_SCSI is not set
+# CONFIG_I2O_PROC is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN_BOOL is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_KEYBDEV is not set
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_GAMEPORT is not set
+CONFIG_SOUND_GAMEPORT=y
+# CONFIG_GAMEPORT_NS558 is not set
+# CONFIG_GAMEPORT_L4 is not set
+# CONFIG_INPUT_EMU10K1 is not set
+# CONFIG_GAMEPORT_PCIGAME is not set
+# CONFIG_GAMEPORT_FM801 is not set
+# CONFIG_GAMEPORT_CS461x is not set
+# CONFIG_SERIO is not set
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_JOYSTICK_ANALOG is not set
+# CONFIG_JOYSTICK_A3D is not set
+# CONFIG_JOYSTICK_ADI is not set
+# CONFIG_JOYSTICK_COBRA is not set
+# CONFIG_JOYSTICK_GF2K is not set
+# CONFIG_JOYSTICK_GRIP is not set
+# CONFIG_JOYSTICK_INTERACT is not set
+# CONFIG_JOYSTICK_SIDEWINDER is not set
+# CONFIG_JOYSTICK_TMDC is not set
+# CONFIG_JOYSTICK_IFORCE_USB is not set
+# CONFIG_JOYSTICK_IFORCE_232 is not set
+# CONFIG_JOYSTICK_WARRIOR is not set
+# CONFIG_JOYSTICK_MAGELLAN is not set
+# CONFIG_JOYSTICK_SPACEORB is not set
+# CONFIG_JOYSTICK_SPACEBALL is not set
+# CONFIG_JOYSTICK_STINGER is not set
+# CONFIG_JOYSTICK_DB9 is not set
+# CONFIG_JOYSTICK_GAMECON is not set
+# CONFIG_JOYSTICK_TURBOGRAFX is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_SERIAL_8250_CS is not set
+# CONFIG_SERIAL_8250_EXTENDED is not set
+# CONFIG_SERIAL_8250_MANY_PORTS is not set
+# CONFIG_SERIAL_8250_SHARE_IRQ is not set
+# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+# CONFIG_SERIAL_8250_MULTIPORT is not set
+# CONFIG_SERIAL_8250_RSA is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_ATOMWIDE_SERIAL is not set
+# CONFIG_DUALSP_SERIAL is not set
+# CONFIG_SERIAL_ANAKIN is not set
+# CONFIG_SERIAL_ANAKIN_CONSOLE is not set
+# CONFIG_SERIAL_AMBA is not set
+# CONFIG_SERIAL_AMBA_CONSOLE is not set
+# CONFIG_SERIAL_CLPS711X is not set
+# CONFIG_SERIAL_CLPS711X_CONSOLE is not set
+# CONFIG_SERIAL_CLPS711X_OLD_NAME is not set
+# CONFIG_SERIAL_21285 is not set
+# CONFIG_SERIAL_21285_OLD is not set
+# CONFIG_SERIAL_21285_CONSOLE is not set
+# CONFIG_SERIAL_UART00 is not set
+# CONFIG_SERIAL_UART00_CONSOLE is not set
+# CONFIG_SERIAL_SA1100 is not set
+# CONFIG_SERIAL_SA1100_CONSOLE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_UNIX98_PTY_COUNT=256
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# L3 serial bus support
+#
+# CONFIG_L3 is not set
+# CONFIG_L3_ALGOBIT is not set
+# CONFIG_L3_BIT_SA1100_GPIO is not set
+
+#
+# Other L3 adapters
+#
+# CONFIG_L3_SA1111 is not set
+# CONFIG_BIT_SA1100_GPIO is not set
+
+#
+# Mice
+#
+CONFIG_BUSMOUSE=y
+# CONFIG_ATIXL_BUSMOUSE is not set
+# CONFIG_LOGIBUSMOUSE is not set
+# CONFIG_MS_BUSMOUSE is not set
+CONFIG_MOUSE=y
+CONFIG_PSMOUSE=y
+# CONFIG_82C710_MOUSE is not set
+# CONFIG_PC110_PAD is not set
+# CONFIG_QIC02_TAPE is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_INTEL_RNG is not set
+# CONFIG_NVRAM is not set
+# CONFIG_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_FTAPE is not set
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+
+#
+# PCMCIA character devices
+#
+# CONFIG_SYNCLINK_CS is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# File systems
+#
+# CONFIG_QUOTA is not set
+# CONFIG_QFMT_V1 is not set
+# CONFIG_QFMT_V2 is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+# CONFIG_ADFS_FS is not set
+# CONFIG_ADFS_FS_RW is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_JBD is not set
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+# CONFIG_UMSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+# CONFIG_JFFS2_FS_NAND is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_TMPFS is not set
+CONFIG_RAMFS=y
+# CONFIG_ISO9660_FS is not set
+# CONFIG_JOLIET is not set
+# CONFIG_ZISOFS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_JFS_DEBUG is not set
+# CONFIG_JFS_STATISTICS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_NTFS_FS is not set
+# CONFIG_NTFS_DEBUG is not set
+# CONFIG_HPFS_FS is not set
+CONFIG_PROC_FS=y
+# CONFIG_DEVFS_FS is not set
+# CONFIG_DEVFS_MOUNT is not set
+# CONFIG_DEVFS_DEBUG is not set
+CONFIG_DEVPTS_FS=y
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_QNX4FS_RW is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_EXT2_FS=y
+# CONFIG_SYSV_FS is not set
+# CONFIG_UDF_FS is not set
+# CONFIG_UDF_RW is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_UFS_FS_WRITE is not set
+
+#
+# Network File Systems
+#
+# CONFIG_CODA_FS is not set
+# CONFIG_INTERMEZZO_FS is not set
+CONFIG_NFS_FS=y
+# CONFIG_NFS_V3 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+# CONFIG_NFSD_V3 is not set
+# CONFIG_NFSD_TCP is not set
+CONFIG_SUNRPC=y
+CONFIG_LOCKD=y
+# CONFIG_EXPORTFS is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_NCPFS_PACKET_SIGNING is not set
+# CONFIG_NCPFS_IOCTL_LOCKING is not set
+# CONFIG_NCPFS_STRONG is not set
+# CONFIG_NCPFS_NFS_NS is not set
+# CONFIG_NCPFS_OS2_NS is not set
+# CONFIG_NCPFS_SMALLDOS is not set
+# CONFIG_NCPFS_NLS is not set
+# CONFIG_NCPFS_EXTRAS is not set
+# CONFIG_ZISOFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+# CONFIG_SMB_NLS is not set
+CONFIG_NLS=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Sound
+#
+CONFIG_SOUND=y
+
+#
+# Open Sound System
+#
+CONFIG_SOUND_PRIME=y
+# CONFIG_SOUND_BT878 is not set
+# CONFIG_SOUND_CMPCI is not set
+# CONFIG_SOUND_EMU10K1 is not set
+# CONFIG_MIDI_EMU10K1 is not set
+# CONFIG_SOUND_FUSION is not set
+# CONFIG_SOUND_CS4281 is not set
+# CONFIG_SOUND_ES1370 is not set
+# CONFIG_SOUND_ES1371 is not set
+# CONFIG_SOUND_ESSSOLO1 is not set
+# CONFIG_SOUND_MAESTRO is not set
+# CONFIG_SOUND_MAESTRO3 is not set
+# CONFIG_SOUND_ICH is not set
+# CONFIG_SOUND_RME96XX is not set
+# CONFIG_SOUND_SONICVIBES is not set
+# CONFIG_SOUND_TRIDENT is not set
+# CONFIG_SOUND_MSNDCLAS is not set
+# CONFIG_SOUND_MSNDPIN is not set
+# CONFIG_SOUND_VIA82CXXX is not set
+# CONFIG_MIDI_VIA82CXXX is not set
+# CONFIG_SOUND_OSS is not set
+# CONFIG_SOUND_WAVEARTIST is not set
+# CONFIG_SOUND_PXA_AC97 is not set
+# CONFIG_SOUND_TVMIXER is not set
+
+#
+# Advanced Linux Sound Architecture
+#
+# CONFIG_SND is not set
+
+#
+# Multimedia Capabilities Port drivers
+#
+# CONFIG_MCP is not set
+# CONFIG_MCP_SA1100 is not set
+# CONFIG_MCP_UCB1200 is not set
+# CONFIG_MCP_UCB1200_AUDIO is not set
+# CONFIG_MCP_UCB1200_TS is not set
+# CONFIG_MCP_UCB1400_TS is not set
+
+#
+# Console Switches
+#
+# CONFIG_SWITCHES is not set
+
+#
+# USB support
+#
+# CONFIG_USB is not set
+
+#
+# Bluetooth support
+#
+# CONFIG_BLUEZ is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_NO_FRAME_POINTER is not set
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SLAB is not set
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_WAITQ is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_ERRORS=y
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_DC21285_PORT is not set
+# CONFIG_DEBUG_CLPS711X_UART2 is not set
+
+#
+# Library routines
+#
+CONFIG_CRC32=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y

arch/arm/kernel/debug.S

@@ -215,8 +215,8 @@
 		.macro	addruart,rx
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1			@ MMU enabled?
-		moveq	\rx, #0x40000000	@ physical
-		movne	\rx, #0xfc000000	@ virtual
+		moveq	\rx, #0x40000000		@ physical
+		movne	\rx, #io_p2v(0x40000000)	@ virtual
 		orr	\rx, \rx, #0x00100000
 		.endm
 

arch/arm/kernel/entry-armv.S

@@ -590,7 +590,7 @@ ENTRY(anakin_active_irqs)
 		.endm
 
 		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-		mov	\base, #0xfc000000		@ IIR Ctl = 0xfcd00000
+		mov	\base, #io_p2v(0x40000000)	@ IIR Ctl = 0x40d00000
 		add	\base, \base, #0x00d00000
 		ldr	\irqstat, [\base, #0]		@ ICIP
 		ldr	\irqnr, [\base, #4]		@ ICMR

arch/arm/mach-pxa/Makefile

@@ -29,4 +29,7 @@ leds-$(CONFIG_ARCH_PXA_IDP) += leds-idp.o
 
 obj-$(CONFIG_LEDS) += $(leds-y)
 
+# Misc features
+obj-$(CONFIG_PM) += pm.o sleep.o
+
 include $(TOPDIR)/Rules.make

arch/arm/mach-pxa/generic.c

@@ -91,9 +91,10 @@ static struct map_desc standard_io_desc[] __initdata = {
  /* virtual     physical    length      type */
   { 0xf6000000, 0x20000000, 0x01000000, MT_DEVICE }, /* PCMCIA0 IO */
   { 0xf7000000, 0x30000000, 0x01000000, MT_DEVICE }, /* PCMCIA1 IO */
-  { 0xfc000000, 0x40000000, 0x01400000, MT_DEVICE }, /* Devs */
-  { 0xfe000000, 0x44000000, 0x00200000, MT_DEVICE }, /* LCD */
-  { 0xff000000, 0x48000000, 0x00200000, MT_DEVICE }  /* Mem Ctl */
+  { 0xf8000000, 0x40000000, 0x01400000, MT_DEVICE }, /* Devs */
+  { 0xfa000000, 0x44000000, 0x00100000, MT_DEVICE }, /* LCD */
+  { 0xfc000000, 0x48000000, 0x00100000, MT_DEVICE }, /* Mem Ctl */
+  { 0xff000000, 0x00000000, 0x00100000, MT_DEVICE }  /* UNCACHED_PHYS_0 */
 };
 
 void __init pxa_map_io(void)

arch/arm/mach-pxa/lubbock.c

@@ -142,11 +142,20 @@ static void __init lubbock_map_io(void)
 
 	/* This is for the SMC chip select */
 	pxa_gpio_mode(GPIO79_nCS_3_MD);
+
+	/* setup sleep mode values */
+	PWER  = 0x00000002;
+	PFER  = 0x00000000;
+	PRER  = 0x00000002;
+	PGSR0 = 0x00008000;
+	PGSR1 = 0x003F0202;
+	PGSR2 = 0x0001C000;
+	PCFR |= PCFR_OPDE;
 }
 
 MACHINE_START(LUBBOCK, "Intel DBPXA250 Development Platform")
 	MAINTAINER("MontaVista Software Inc.")
-	BOOT_MEM(0xa0000000, 0x40000000, 0xfc000000)
+	BOOT_MEM(0xa0000000, 0x40000000, io_p2v(0x40000000))
 	MAPIO(lubbock_map_io)
 	INITIRQ(lubbock_init_irq)
 MACHINE_END

arch/arm/mach-pxa/pm.c

+/*
+ * PXA250/210 Power Management Routines
+ *
+ * Original code for the SA11x0:
+ * Copyright (c) 2001 Cliff Brake <cbrake@accelent.com>
+ *
+ * Modified for the PXA250 by Nicolas Pitre:
+ * Copyright (c) 2002 Monta Vista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License.
+ */
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/pm.h>
+#include <linux/slab.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/sysctl.h>
+#include <linux/errno.h>
+
+#include <asm/hardware.h>
+#include <asm/memory.h>
+#include <asm/system.h>
+#include <asm/leds.h>
+
+
+/*
+ * Debug macros
+ */
+#undef DEBUG
+
+extern void pxa_cpu_suspend(void);
+extern void pxa_cpu_resume(void);
+
+#define SAVE(x)		sleep_save[SLEEP_SAVE_##x] = x
+#define RESTORE(x)	x = sleep_save[SLEEP_SAVE_##x]
+
+/*
+ * List of global PXA peripheral registers to preserve.
+ * More ones like CP and general purpose register values are preserved
+ * with the stack pointer in sleep.S.
+ */
+enum {	SLEEP_SAVE_START = 0,
+
+	SLEEP_SAVE_OSCR, SLEEP_SAVE_OIER,
+	SLEEP_SAVE_OSMR0, SLEEP_SAVE_OSMR1, SLEEP_SAVE_OSMR2, SLEEP_SAVE_OSMR3,
+
+	SLEEP_SAVE_GPDR0, SLEEP_SAVE_GPDR1, SLEEP_SAVE_GPDR2,
+	SLEEP_SAVE_GRER0, SLEEP_SAVE_GRER1, SLEEP_SAVE_GRER2,
+	SLEEP_SAVE_GFER0, SLEEP_SAVE_GFER1, SLEEP_SAVE_GFER2,
+	SLEEP_SAVE_GAFR0_L, SLEEP_SAVE_GAFR1_L, SLEEP_SAVE_GAFR2_L,
+	SLEEP_SAVE_GAFR0_U, SLEEP_SAVE_GAFR1_U, SLEEP_SAVE_GAFR2_U,
+
+	SLEEP_SAVE_FFIER, SLEEP_SAVE_FFLCR, SLEEP_SAVE_FFMCR,
+	SLEEP_SAVE_FFSPR, SLEEP_SAVE_FFISR,
+	SLEEP_SAVE_FFDLL, SLEEP_SAVE_FFDLH,
+
+	SLEEP_SAVE_ICMR,
+	SLEEP_SAVE_CKEN,
+
+	SLEEP_SAVE_CKSUM,
+
+	SLEEP_SAVE_SIZE
+};
+
+
+int pm_do_suspend(void)
+{
+	unsigned long sleep_save[SLEEP_SAVE_SIZE];
+	unsigned long checksum = 0;
+	int i;
+
+	cli();
+	clf();
+
+	leds_event(led_stop);
+
+	/* preserve current time */
+	RCNR = xtime.tv_sec;
+
+	/*
+	 * Temporary solution.  This won't be necessary once
+	 * we move pxa support into the serial/* driver
+	 * Save the FF UART
+	 */
+	SAVE(FFIER);
+	SAVE(FFLCR);
+	SAVE(FFMCR);
+	SAVE(FFSPR);
+	SAVE(FFISR);
+	FFLCR |= 0x80;
+	SAVE(FFDLL);
+	SAVE(FFDLH);
+	FFLCR &= 0xef;
+
+	/* save vital registers */
+	SAVE(OSCR);
+	SAVE(OSMR0);
+	SAVE(OSMR1);
+	SAVE(OSMR2);
+	SAVE(OSMR3);
+	SAVE(OIER);
+
+	SAVE(GPDR0); SAVE(GPDR1); SAVE(GPDR2);
+	SAVE(GRER0); SAVE(GRER1); SAVE(GRER2);
+	SAVE(GFER0); SAVE(GFER1); SAVE(GFER2);
+	SAVE(GAFR0_L); SAVE(GAFR0_U);
+	SAVE(GAFR1_L); SAVE(GAFR1_U);
+	SAVE(GAFR2_L); SAVE(GAFR2_U);
+
+	SAVE(ICMR);
+	ICMR = 0;
+
+	SAVE(CKEN);
+	CKEN = 0;
+
+	/* Note: wake up source are set up in each machine specific files */
+
+	/* clear GPIO transition detect  bits */
+	GEDR0 = GEDR0; GEDR1 = GEDR1; GEDR2 = GEDR2;
+
+	/* Clear sleep reset status */
+	RCSR = RCSR_SMR;
+
+	/* set resume return address */
+	PSPR = virt_to_phys(pxa_cpu_resume);
+
+	/* before sleeping, calculate and save a checksum */
+	for (i = 0; i < SLEEP_SAVE_SIZE - 1; i++)
+		checksum += sleep_save[i];
+	sleep_save[SLEEP_SAVE_CKSUM] = checksum;
+
+	/* *** go zzz *** */
+	pxa_cpu_suspend();
+
+	/* after sleeping, validate the checksum */
+	checksum = 0;
+	for (i = 0; i < SLEEP_SAVE_SIZE - 1; i++)
+		checksum += sleep_save[i];
+
+	/* if invalid, display message and wait for a hardware reset */
+	if (checksum != sleep_save[SLEEP_SAVE_CKSUM]) {
+#ifdef CONFIG_ARCH_LUBBOCK
+		LUB_HEXLED = 0xbadbadc5;
+#endif
+		while (1);
+	}
+
+	/* ensure not to come back here if it wasn't intended */
+	PSPR = 0;
+
+	/* restore registers */
+	RESTORE(GPDR0); RESTORE(GPDR1); RESTORE(GPDR2);
+	RESTORE(GRER0); RESTORE(GRER1); RESTORE(GRER2);
+	RESTORE(GFER0); RESTORE(GFER1); RESTORE(GFER2);
+	RESTORE(GAFR0_L); RESTORE(GAFR0_U);
+	RESTORE(GAFR1_L); RESTORE(GAFR1_U);
+	RESTORE(GAFR2_L); RESTORE(GAFR2_U);
+
+	PSSR = PSSR_PH;
+
+	RESTORE(OSMR0);
+	RESTORE(OSMR1);
+	RESTORE(OSMR2);
+	RESTORE(OSMR3);
+	RESTORE(OSCR);
+	RESTORE(OIER);
+
+	RESTORE(CKEN);
+
+	ICLR = 0;
+	ICCR = 1;
+	RESTORE(ICMR);
+
+	/*
+	 * Temporary solution.  This won't be necessary once
+	 * we move pxa support into the serial/* driver.
+	 * Restore the FF UART.
+	 */
+	RESTORE(FFMCR);
+	RESTORE(FFSPR);
+	RESTORE(FFLCR);
+	FFLCR |= 0x80;
+	RESTORE(FFDLH);
+	RESTORE(FFDLL);
+	RESTORE(FFLCR);
+	RESTORE(FFISR);
+	FFFCR = 0x07;
+	RESTORE(FFIER);
+
+	/* restore current time */
+	xtime.tv_sec = RCNR;
+
+#ifdef DEBUG
+	printk(KERN_DEBUG "*** made it back from resume\n");
+#endif
+
+	leds_event(led_start);
+
+	sti();
+
+	return 0;
+}
+
+unsigned long sleep_phys_sp(void *sp)
+{
+	return virt_to_phys(sp);
+}
+
+#ifdef CONFIG_SYSCTL
+/*
+ * ARGH!  ACPI people defined CTL_ACPI in linux/acpi.h rather than
+ * linux/sysctl.h.
+ *
+ * This means our interface here won't survive long - it needs a new
+ * interface.  Quick hack to get this working - use sysctl id 9999.
+ */
+#warning ACPI broke the kernel, this interface needs to be fixed up.
+#define CTL_ACPI 9999
+#define ACPI_S1_SLP_TYP 19
+
+/*
+ * Send us to sleep.
+ */
+static int sysctl_pm_do_suspend(void)
+{
+	int retval;
+
+	retval = pm_send_all(PM_SUSPEND, (void *)3);
+
+	if (retval == 0) {
+		retval = pm_do_suspend();
+
+		pm_send_all(PM_RESUME, (void *)0);
+	}
+
+	return retval;
+}
+
+static struct ctl_table pm_table[] =
+{
+	{ACPI_S1_SLP_TYP, "suspend", NULL, 0, 0600, NULL, (proc_handler *)&sysctl_pm_do_suspend},
+	{0}
+};
+
+static struct ctl_table pm_dir_table[] =
+{
+	{CTL_ACPI, "pm", NULL, 0, 0555, pm_table},
+	{0}
+};
+
+/*
+ * Initialize power interface
+ */
+static int __init pm_init(void)
+{
+	register_sysctl_table(pm_dir_table, 1);
+	return 0;
+}
+
+__initcall(pm_init);
+
+#endif

arch/arm/mach-pxa/sleep.S

+/*
+ * Low-level PXA250/210 sleep/wakeUp support
+ *
+ * Initial SA1110 code:
+ * Copyright (c) 2001 Cliff Brake <cbrake@accelent.com>
+ *
+ * Adapted for PXA by Nicolas Pitre:
+ * Copyright (c) 2002 Monta Vista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License.
+ */
+
+#include <linux/config.h>
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <asm/hardware.h>
+
+		.text
+
+/*
+ * pxa_cpu_suspend()
+ *
+ * Forces CPU into sleep state
+ */
+
+ENTRY(pxa_cpu_suspend)
+
+	mra	r2, r3, acc0
+	stmfd	sp!, {r2 - r12, lr}		@ save registers on stack
+
+	@ get coprocessor registers
+	mrc	p15, 0, r4, c15, c1, 0		@ CP access reg
+	mrc	p15, 0, r5, c13, c0, 0		@ PID
+	mrc 	p15, 0, r6, c3, c0, 0		@ domain ID
+	mrc 	p15, 0, r7, c2, c0, 0		@ translation table base addr
+	mrc	p15, 0, r8, c1, c1, 0           @ auxiliary control reg
+	mrc 	p15, 0, r9, c1, c0, 0		@ control reg
+
+	@ store them plus current virtual stack ptr on stack
+	mov	r10, sp
+	stmfd	sp!, {r4 - r10}
+
+	@ preserve phys address of stack
+	mov	r0, sp
+	bl	sleep_phys_sp
+	ldr	r1, =sleep_save_sp
+	str	r0, [r1]
+
+	@ clean data cache
+	bl	cpu_xscale_cache_clean_invalidate_all
+
+	@ Put the processor to sleep
+	@ (also workaround for sighting 28071)
+
+	@ prepare value for sleep mode
+	mov	r1, #3				@ sleep mode
+
+	@ prepare to put SDRAM into self-refresh manually
+	ldr	r4, =MDREFR
+	ldr	r5, [r4]
+	orr	r5, r5, #MDREFR_SLFRSH
+
+	@ prepare pointer to physical address 0 (virtual mapping in generic.c)
+	mov	r2, #UNCACHED_PHYS_0
+
+	@ align execution to a cache line
+	b	1f
+
+	.ltorg
+	.align	5
+1:
+
+	@ All needed values are now in registers.
+	@ These last instructions should be in cache
+
+	@ put SDRAM into self-refresh
+	str	r5, [r4]
+
+	@ force address lines low by reading at physical address 0
+	ldr	r3, [r2]
+
+	@ enter sleep mode
+	mcr	p14, 0, r1, c7, c0, 0
+
+20:	nop
+	b	20b				@ loop waiting for sleep
+
+/*
+ * cpu_pxa_resume()
+ *
+ * entry point from bootloader into kernel during resume
+ *
+ * Note: Yes, part of the following code is located into the .data section.
+ *       This is to allow sleep_save_sp to be accessed with a relative load
+ *       while we can't rely on any MMU translation.  We could have put
+ *       sleep_save_sp in the .text section as well, but some setups might
+ *       insist on it to be truely read-only.
+ */
+
+	.data
+	.align 5
+ENTRY(pxa_cpu_resume)
+	mov	r0, #I_BIT | F_BIT | MODE_SVC	@ set SVC, irqs off
+	msr	cpsr_c, r0
+
+	ldr	r0, sleep_save_sp		@ stack phys addr
+	ldr	r2, =resume_after_mmu		@ its absolute virtual address
+	ldmfd	r0, {r4 - r9, sp}		@ CP regs + virt stack ptr
+
+	mov	r1, #0
+	mcr	p15, 0, r1, c8, c7, 0   	@ invalidate I & D TLBs
+	mcr	p15, 0, r1, c7, c7, 0		@ invalidate I & D caches, BTB
+
+#ifdef CONFIG_XSCALE_CACHE_ERRATA
+	bic     r9, r9, #0x0004			@ see cpu_xscale_proc_init
+#endif
+
+	mcr	p15, 0, r4, c15, c1, 0		@ CP access reg
+	mcr	p15, 0, r5, c13, c0, 0		@ PID
+	mcr 	p15, 0, r6, c3, c0, 0		@ domain ID
+	mcr 	p15, 0, r7, c2, c0, 0		@ translation table base addr
+	mcr	p15, 0, r8, c1, c1, 0           @ auxiliary control reg
+	b	resume_turn_on_mmu		@ cache align execution
+
+	.align 5
+resume_turn_on_mmu:
+	mcr 	p15, 0, r9, c1, c0, 0		@ turn on MMU, caches, etc.
+
+	@ Let us ensure we jump to resume_after_mmu only when the mcr above
+	@ actually took effect.  They call it the "cpwait" operation.
+	mrc	p15, 0, r1, c2, c0, 0		@ queue a dependency on CP15
+	sub	pc, r2, r1, lsr #32		@ jump to virtual addr
+	nop
+	nop
+	nop
+
+sleep_save_sp:
+	.word	0				@ preserve stack phys ptr here
+
+	.text
+resume_after_mmu:
+#ifdef CONFIG_XSCALE_CACHE_ERRATA
+	bl	cpu_xscale_proc_init
+#endif
+	ldmfd	sp!, {r2, r3}
+	mar	acc0, r2, r3
+	ldmfd	sp!, {r4 - r12, pc}		@ return to caller
+
+

arch/arm/mm/proc-xscale.S

@@ -156,7 +156,7 @@ ENTRY(cpu_xscale_reset)
 	msr	cpsr_c, r1			@ reset CPSR
 	mrc	p15, 0, r1, c1, c0, 0		@ ctrl register
 	bic	r1, r1, #0x0086			@ ........B....CA.
-	bic	r1, r1, #0x1900			@ ...IZ..S........
+	bic	r1, r1, #0x3900			@ ..VIZ..S........
 	mcr	p15, 0, r1, c1, c0, 0		@ ctrl register
 	mcr	p15, 0, ip, c7, c7, 0		@ invalidate I,D caches & BTB
 	bic	r1, r1, #0x0001			@ ...............M

drivers/pcmcia/Makefile

@@ -2,7 +2,7 @@
 # Makefile for the kernel pcmcia subsystem (c/o David Hinds)
 #
 
-export-objs := ds.o cs.o yenta.o
+export-objs := ds.o cs.o yenta.o sa1100_pcmcia.o
 
 obj-$(CONFIG_PCMCIA)			+= pcmcia_core.o ds.o
 ifeq ($(CONFIG_CARDBUS),y)

drivers/pcmcia/sa1100_generic.c

@@ -1052,6 +1052,7 @@ int sa1100_register_pcmcia(struct pcmcia_low_level *ops)
 	pcmcia_low_level = NULL;
 	return ret;
 }
+EXPORT_SYMBOL(sa1100_register_pcmcia);
 
 /* sa1100_unregister_pcmcia()
  * ^^^^^^^^^^^^^^^^^^^^^^^^^^
@@ -1091,6 +1092,7 @@ void sa1100_unregister_pcmcia(struct pcmcia_low_level *ops)
 
 	pcmcia_low_level = NULL;
 }
+EXPORT_SYMBOL(sa1100_unregister_pcmcia);
 
 /* sa1100_pcmcia_init()
  * ^^^^^^^^^^^^^^^^^^^^

drivers/video/sa1100fb.c

@@ -205,9 +205,6 @@
 extern void (*sa1100fb_backlight_power)(int on);
 extern void (*sa1100fb_lcd_power)(int on);
 
-void (*sa1100fb_blank_helper)(int blank);
-EXPORT_SYMBOL(sa1100fb_blank_helper);
-
 /*
  * IMHO this looks wrong.  In 8BPP, length should be 8.
  */
@@ -262,7 +259,7 @@ static struct sa1100fb_mach_info pal_info __initdata = {
 #endif
 #endif
 
-#ifdef CONFIG_SA1100_H3XXX
+#ifdef CONFIG_SA1100_H3800
 static struct sa1100fb_mach_info h3800_info __initdata = {
 	pixclock:	174757, 	bpp:		16,
 	xres:		320,		yres:		240,
@@ -274,9 +271,12 @@ static struct sa1100fb_mach_info h3800_info __initdata = {
 	sync:		0,		cmap_static:	1,
 
 	lccr0:		LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
-	lccr3:		LCCR3_ACBsCntOff | LCCR3_PixFlEdg | LCCR3_OutEnH,
+	lccr3:		LCCR3_ACBsDiv(2) | LCCR3_PixRsEdg | LCCR3_OutEnH |
+			LCCR3_ACBsCntOff,
 };
+#endif
 
+#ifdef CONFIG_SA1100_H3600
 static struct sa1100fb_mach_info h3600_info __initdata = {
 	pixclock:	174757, 	bpp:		16,
 	xres:		320,		yres:		240,
@@ -288,7 +288,8 @@ static struct sa1100fb_mach_info h3600_info __initdata = {
 	sync:		0,		cmap_static:	1,
 
 	lccr0:		LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
-	lccr3:		LCCR3_ACBsCntOff | LCCR3_OutEnH | LCCR3_PixFlEdg,
+	lccr3:		LCCR3_ACBsDiv(2) | LCCR3_PixRsEdg | LCCR3_OutEnH |
+			LCCR3_ACBsCntOff,
 };
 
 static struct sa1100fb_rgb h3600_rgb_16 = {
@@ -297,7 +298,9 @@ static struct sa1100fb_rgb h3600_rgb_16 = {
 	blue:	{ offset: 1,  length: 4, },
 	transp: { offset: 0,  length: 0, },
 };
+#endif
 
+#ifdef CONFIG_SA1100_H3100
 static struct sa1100fb_mach_info h3100_info __initdata = {
 	pixclock:	406977, 	bpp:		4,
 	xres:		320,		yres:		240,
@@ -680,14 +683,18 @@ sa1100fb_get_machine_info(struct sa1100fb_info *fbi)
 #endif
 	}
 #endif
-#ifdef CONFIG_SA1100_H3XXX
+#ifdef CONFIG_SA1100_H3100
+	if (machine_is_h3100()) {
+		inf = &h3100_info;
+	}
+#endif
+#ifdef CONFIG_SA1100_H3600
 	if (machine_is_h3600()) {
 		inf = &h3600_info;
 		fbi->rgb[RGB_16] = &h3600_rgb_16;
 	}
-	if (machine_is_h3100()) {
-		inf = &h3100_info;
-	}
+#endif
+#ifdef CONFIG_SA1100_H3800
 	if (machine_is_h3800()) {
 		inf = &h3800_info;
 	}
@@ -1310,13 +1317,9 @@ static int sa1100fb_blank(int blank, struct fb_info *info)
 			for (i = 0; i < fbi->palette_size; i++)
 				sa1100fb_setpalettereg(i, 0, 0, 0, 0, info);
 		sa1100fb_schedule_task(fbi, C_DISABLE);
-		if (sa1100fb_blank_helper)
-			sa1100fb_blank_helper(blank);
 		break;
 
 	case VESA_NO_BLANKING:
-		if (sa1100fb_blank_helper)
-			sa1100fb_blank_helper(blank);
 		if (fbi->fb.disp->visual == FB_VISUAL_PSEUDOCOLOR ||
 		    fbi->fb.disp->visual == FB_VISUAL_STATIC_PSEUDOCOLOR)
 			fb_set_cmap(&fbi->fb.cmap, 1, info);

include/asm-arm/arch-pxa/hardware.h

@@ -27,17 +27,27 @@
 
 
 /*
- * Intel PXA internal I/O mappings
+ * We requires absolute addresses.
  */
+#define PCIO_BASE		0
 
-#define io_p2v(x)	\
-	(((x) < 0x44000000) ? ((x) - 0x40000000 + 0xfc000000) :	\
-	 ((x) < 0x48000000) ? ((x) - 0x44000000 + 0xfe000000) :	\
-	 		      ((x) - 0x48000000 + 0xff000000))
-#define io_v2p( x )	\
-	(((x) < 0xfe000000) ? ((x) - 0xfc000000 + 0x40000000) :	\
-	 ((x) < 0xff000000) ? ((x) - 0xfe000000 + 0x44000000) :	\
-	 		      ((x) - 0xff000000 + 0x48000000))
+/*
+ * Workarounds for at least 2 errata so far require this.
+ * The mapping is set in mach-pxa/generic.c.
+ */
+#define UNCACHED_PHYS_0		0xff000000
+#define UNCACHED_ADDR		UNCACHED_PHYS_0
+
+/*
+ * Intel PXA internal I/O mappings:
+ *
+ * 0x40000000 - 0x41ffffff <--> 0xf8000000 - 0xf9ffffff
+ * 0x44000000 - 0x45ffffff <--> 0xfa000000 - 0xfbffffff
+ * 0x48000000 - 0x49ffffff <--> 0xfc000000 - 0xfdffffff
+ */
+
+#define io_p2v(x)	( ((x) | 0xbe000000) ^ (~((x) >> 1) & 0x06000000) )
+#define io_v2p( x )	( ((x) & 0x41ffffff) ^ ( ((x) & 0x06000000) << 1) )
 
 #ifndef __ASSEMBLY__
 
@@ -51,7 +61,7 @@
  * doesn't guess this by itself.
  */
 #include <asm/types.h>
-typedef struct { volatile u32 offset[1024]; } __regbase;
+typedef struct { volatile u32 offset[4096]; } __regbase;
 # define __REGP(x)	((__regbase *)((x)&~4095))->offset[((x)&4095)>>2]
 # define __REG(x)	__REGP(io_p2v(x))
 #endif
@@ -93,5 +103,6 @@ extern unsigned int get_lclk_frequency_10khz(void);
 
 #include "lubbock.h"
 #include "idp.h"
+#include "cerf.h"
 
 #endif  /* _ASM_ARCH_HARDWARE_H */

include/asm-arm/arch-pxa/pxa-regs.h

@@ -262,6 +262,7 @@ typedef void            (*ExcpHndlr) (void) ;
 
 /* default combinations */
 #define DCMD_RXPCDR	(DCMD_INCTRGADDR|DCMD_FLOWSRC|DCMD_BURST32|DCMD_WIDTH4)
+#define DCMD_RXMCDR	(DCMD_INCTRGADDR|DCMD_FLOWSRC|DCMD_BURST32|DCMD_WIDTH4)
 #define DCMD_TXPCDR	(DCMD_INCSRCADDR|DCMD_FLOWTRG|DCMD_BURST32|DCMD_WIDTH4)
 
 
@@ -361,7 +362,7 @@ typedef void            (*ExcpHndlr) (void) ;
 #define LSR_OE		(1 << 1)	/* Overrun Error */
 #define LSR_DR		(1 << 0)	/* Data Ready */
 
-#define MCR_LOOP	(1 << 4)
+#define MCR_LOOP	(1 << 4)	*/
 #define MCR_OUT2	(1 << 3)	/* force MSR_DCD in loopback mode */
 #define MCR_OUT1	(1 << 2)	/* force MSR_RI in loopback mode */
 #define MCR_RTS		(1 << 1)	/* Request to Send */
@@ -376,6 +377,35 @@ typedef void            (*ExcpHndlr) (void) ;
 #define MSR_DDSR	(1 << 1)	/* Delta Data Set Ready */
 #define MSR_DCTS	(1 << 0)	/* Delta Clear To Send */
 
+/*
+ * IrSR (Infrared Selection Register)
+ */
+#define IrSR_OFFSET 0x20
+
+#define IrSR_RXPL_NEG_IS_ZERO (1<<4)
+#define IrSR_RXPL_POS_IS_ZERO 0x0
+#define IrSR_TXPL_NEG_IS_ZERO (1<<3)
+#define IrSR_TXPL_POS_IS_ZERO 0x0
+#define IrSR_XMODE_PULSE_1_6  (1<<2)
+#define IrSR_XMODE_PULSE_3_16 0x0
+#define IrSR_RCVEIR_IR_MODE   (1<<1)
+#define IrSR_RCVEIR_UART_MODE 0x0
+#define IrSR_XMITIR_IR_MODE   (1<<0)
+#define IrSR_XMITIR_UART_MODE 0x0
+
+#define IrSR_IR_RECEIVE_ON (\
+                IrSR_RXPL_NEG_IS_ZERO | \
+                IrSR_TXPL_POS_IS_ZERO | \
+                IrSR_XMODE_PULSE_3_16 | \
+                IrSR_RCVEIR_IR_MODE   | \
+                IrSR_XMITIR_UART_MODE)
+
+#define IrSR_IR_TRANSMIT_ON (\
+                IrSR_RXPL_NEG_IS_ZERO | \
+                IrSR_TXPL_POS_IS_ZERO | \
+                IrSR_XMODE_PULSE_3_16 | \
+                IrSR_RCVEIR_UART_MODE | \
+                IrSR_XMITIR_IR_MODE)
 
 /*
  * I2C registers
@@ -387,6 +417,37 @@ typedef void            (*ExcpHndlr) (void) ;
 #define ISR		__REG(0x40301698)  /* I2C Status Register - ISR */
 #define ISAR		__REG(0x403016A0)  /* I2C Slave Address Register - ISAR */
 
+/* ----- Control register bits ---------------------------------------- */
+
+#define ICR_START	0x1		/* start bit */
+#define ICR_STOP	0x2		/* stop bit */
+#define ICR_ACKNAK	0x4		/* send ACK(0) or NAK(1) */
+#define ICR_TB		0x8 		/* transfer byte bit */
+#define ICR_MA		0x10		/* master abort */
+#define ICR_SCLE	0x20		/* master clock enable */
+#define ICR_IUE		0x40		/* unit enable */
+#define ICR_GCD		0x80		/* general call disable */
+#define ICR_ITEIE	0x100		/* enable tx interrupts */
+#define ICR_IRFIE	0x200		/* enable rx interrupts */
+#define ICR_BEIE	0x400		/* enable bus error ints */
+#define ICR_SSDIE	0x800		/* slave STOP detected int enable */
+#define ICR_ALDIE	0x1000  	/* enable arbitration interrupt */
+#define ICR_SADIE	0x2000		/* slave address detected int enable */
+#define ICR_UR		0x4000		/* unit reset */
+
+/* ----- Status register bits ----------------------------------------- */
+
+#define ISR_RWM         0x1		/* read/write mode */
+#define ISR_ACKNAK      0x2		/* ack/nak status */
+#define ISR_UB          0x4		/* unit busy */
+#define ISR_IBB         0x8		/* bus busy */
+#define ISR_SSD         0x10		/* slave stop detected */
+#define ISR_ALD         0x20		/* arbitration loss detected */
+#define ISR_ITE         0x40            /* tx buffer empty */
+#define ISR_IRF         0x80            /* rx buffer full */
+#define ISR_GCAD        0x100		/* general call address detected */
+#define ISR_SAD         0x200		/* slave address detected */
+#define ISR_BED         0x400           /* bus error no ACK/NAK */
 
 /*
  * Serial Audio Controller
@@ -486,24 +547,92 @@ typedef void            (*ExcpHndlr) (void) ;
 /*
  * USB Device Controller
  */
+#define UDC_RES1	__REG(0x40600004)  /* UDC Undocumented - Reserved1 */
+#define UDC_RES2	__REG(0x40600008)  /* UDC Undocumented - Reserved2 */
+#define UDC_RES3	__REG(0x4060000C)  /* UDC Undocumented - Reserved3 */
 
 #define UDCCR		__REG(0x40600000)  /* UDC Control Register */
+#define UDCCR_UDE	(1 << 0)	/* UDC enable */
+#define UDCCR_UDA	(1 << 1)	/* UDC active */
+#define UDCCR_RSM	(1 << 2)	/* Device resume */
+#define UDCCR_RESIR	(1 << 3)	/* Resume interrupt request */
+#define UDCCR_SUSIR	(1 << 4)	/* Suspend interrupt request */
+#define UDCCR_SRM	(1 << 5)	/* Suspend/resume interrupt mask */
+#define UDCCR_RSTIR	(1 << 6)	/* Reset interrupt request */
+#define UDCCR_REM	(1 << 7)	/* Reset interrupt mask */
+
 #define UDCCS0		__REG(0x40600010)  /* UDC Endpoint 0 Control/Status Register */
+#define UDCCS0_OPR	(1 << 0)	/* OUT packet ready */
+#define UDCCS0_IPR	(1 << 1)	/* IN packet ready */
+#define UDCCS0_FTF	(1 << 2)	/* Flush Tx FIFO */
+#define UDCCS0_DRWF	(1 << 3)	/* Device remote wakeup feature */
+#define UDCCS0_SST	(1 << 4)	/* Sent stall */
+#define UDCCS0_FST	(1 << 5)	/* Force stall */
+#define UDCCS0_RNE	(1 << 6)	/* Receive FIFO no empty */
+#define UDCCS0_SA	(1 << 7)	/* Setup active */
+
+/* Bulk IN - Endpoint 1,6,11 */
 #define UDCCS1		__REG(0x40600014)  /* UDC Endpoint 1 (IN) Control/Status Register */
-#define UDCCS2		__REG(0x40600018)  /* UDC Endpoint 2 (OUT) Control/Status Register */
-#define UDCCS3		__REG(0x4060001C)  /* UDC Endpoint 3 (IN) Control/Status Register */
-#define UDCCS4		__REG(0x40600020)  /* UDC Endpoint 4 (OUT) Control/Status Register */
-#define UDCCS5		__REG(0x40600024)  /* UDC Endpoint 5 (Interrupt) Control/Status Register */
 #define UDCCS6		__REG(0x40600028)  /* UDC Endpoint 6 (IN) Control/Status Register */
-#define UDCCS7		__REG(0x4060002C)  /* UDC Endpoint 7 (OUT) Control/Status Register */
-#define UDCCS8		__REG(0x40600030)  /* UDC Endpoint 8 (IN) Control/Status Register */
-#define UDCCS9		__REG(0x40600034)  /* UDC Endpoint 9 (OUT) Control/Status Register */
-#define UDCCS10		__REG(0x40600038)  /* UDC Endpoint 10 (Interrupt) Control/Status Register */
 #define UDCCS11		__REG(0x4060003C)  /* UDC Endpoint 11 (IN) Control/Status Register */
+
+#define UDCCS_BI_TFS	(1 << 0)	/* Transmit FIFO service */
+#define UDCCS_BI_TPC	(1 << 1)	/* Transmit packet complete */
+#define UDCCS_BI_FTF	(1 << 2)	/* Flush Tx FIFO */
+#define UDCCS_BI_TUR	(1 << 3)	/* Transmit FIFO underrun */
+#define UDCCS_BI_SST	(1 << 4)	/* Sent stall */
+#define UDCCS_BI_FST	(1 << 5)	/* Force stall */
+#define UDCCS_BI_TSP	(1 << 7)	/* Transmit short packet */
+
+/* Bulk OUT - Endpoint 2,7,12 */
+#define UDCCS2		__REG(0x40600018)  /* UDC Endpoint 2 (OUT) Control/Status Register */
+#define UDCCS7		__REG(0x4060002C)  /* UDC Endpoint 7 (OUT) Control/Status Register */
 #define UDCCS12		__REG(0x40600040)  /* UDC Endpoint 12 (OUT) Control/Status Register */
+
+#define UDCCS_BO_RFS	(1 << 0)	/* Receive FIFO service */
+#define UDCCS_BO_RPC	(1 << 1)	/* Receive packet complete */
+#define UDCCS_BO_DME	(1 << 3)	/* DMA enable */
+#define UDCCS_BO_SST	(1 << 4)	/* Sent stall */
+#define UDCCS_BO_FST	(1 << 5)	/* Force stall */
+#define UDCCS_BO_RNE	(1 << 6)	/* Receive FIFO not empty */
+#define UDCCS_BO_RSP	(1 << 7)	/* Receive short packet */
+
+/* Isochronous IN - Endpoint 3,8,13 */
+#define UDCCS3		__REG(0x4060001C)  /* UDC Endpoint 3 (IN) Control/Status Register */
+#define UDCCS8		__REG(0x40600030)  /* UDC Endpoint 8 (IN) Control/Status Register */
 #define UDCCS13		__REG(0x40600044)  /* UDC Endpoint 13 (IN) Control/Status Register */
+
+#define UDCCS_II_TFS	(1 << 0)	/* Transmit FIFO service */
+#define UDCCS_II_TPC	(1 << 1)	/* Transmit packet complete */
+#define UDCCS_II_FTF	(1 << 2)	/* Flush Tx FIFO */
+#define UDCCS_II_TUR	(1 << 3)	/* Transmit FIFO underrun */
+#define UDCCS_II_TSP	(1 << 7)	/* Transmit short packet */
+
+/* Isochronous OUT - Endpoint 4,9,14 */
+#define UDCCS4		__REG(0x40600020)  /* UDC Endpoint 4 (OUT) Control/Status Register */
+#define UDCCS9		__REG(0x40600034)  /* UDC Endpoint 9 (OUT) Control/Status Register */
 #define UDCCS14		__REG(0x40600048)  /* UDC Endpoint 14 (OUT) Control/Status Register */
+
+#define UDCCS_IO_RFS	(1 << 0)	/* Receive FIFO service */
+#define UDCCS_IO_RPC	(1 << 1)	/* Receive packet complete */
+#define UDCCS_IO_ROF	(1 << 3)	/* Receive overflow */
+#define UDCCS_IO_DME	(1 << 3)	/* DMA enable */
+#define UDCCS_IO_RNE	(1 << 6)	/* Receive FIFO not empty */
+#define UDCCS_IO_RSP	(1 << 7)	/* Receive short packet */
+
+/* Interrupt IN - Endpoint 5,10,15 */
+#define UDCCS5		__REG(0x40600024)  /* UDC Endpoint 5 (Interrupt) Control/Status Register */
+#define UDCCS10		__REG(0x40600038)  /* UDC Endpoint 10 (Interrupt) Control/Status Register */
 #define UDCCS15		__REG(0x4060004C)  /* UDC Endpoint 15 (Interrupt) Control/Status Register */
+
+#define UDCCS_INT_TFS	(1 << 0)	/* Transmit FIFO service */
+#define UDCCS_INT_TPC	(1 << 1)	/* Transmit packet complete */
+#define UDCCS_INT_FTF	(1 << 2)	/* Flush Tx FIFO */
+#define UDCCS_INT_TUR	(1 << 3)	/* Transmit FIFO underrun */
+#define UDCCS_INT_SST	(1 << 4)	/* Sent stall */
+#define UDCCS_INT_FST	(1 << 5)	/* Force stall */
+#define UDCCS_INT_TSP	(1 << 7)	/* Transmit short packet */
+
 #define UFNRH		__REG(0x40600060)  /* UDC Frame Number Register High */
 #define UFNRL		__REG(0x40600064)  /* UDC Frame Number Register Low */
 #define UBCR2		__REG(0x40600068)  /* UDC Byte Count Reg 2 */
@@ -528,11 +657,51 @@ typedef void            (*ExcpHndlr) (void) ;
 #define UDDR13		__REG(0x40600C00)  /* UDC Endpoint 13 Data Register */
 #define UDDR14		__REG(0x40600E00)  /* UDC Endpoint 14 Data Register */
 #define UDDR15		__REG(0x406000E0)  /* UDC Endpoint 15 Data Register */
+
 #define UICR0		__REG(0x40600050)  /* UDC Interrupt Control Register 0 */
+
+#define UICR0_IM0	(1 << 0)	/* Interrupt mask ep 0 */
+#define UICR0_IM1	(1 << 1)	/* Interrupt mask ep 1 */
+#define UICR0_IM2	(1 << 2)	/* Interrupt mask ep 2 */
+#define UICR0_IM3	(1 << 3)	/* Interrupt mask ep 3 */
+#define UICR0_IM4	(1 << 4)	/* Interrupt mask ep 4 */
+#define UICR0_IM5	(1 << 5)	/* Interrupt mask ep 5 */
+#define UICR0_IM6	(1 << 6)	/* Interrupt mask ep 6 */
+#define UICR0_IM7	(1 << 7)	/* Interrupt mask ep 7 */
+
 #define UICR1		__REG(0x40600054)  /* UDC Interrupt Control Register 1 */
+
+#define UICR1_IM8	(1 << 0)	/* Interrupt mask ep 8 */
+#define UICR1_IM9	(1 << 1)	/* Interrupt mask ep 9 */
+#define UICR1_IM10	(1 << 2)	/* Interrupt mask ep 10 */
+#define UICR1_IM11	(1 << 3)	/* Interrupt mask ep 11 */
+#define UICR1_IM12	(1 << 4)	/* Interrupt mask ep 12 */
+#define UICR1_IM13	(1 << 5)	/* Interrupt mask ep 13 */
+#define UICR1_IM14	(1 << 6)	/* Interrupt mask ep 14 */
+#define UICR1_IM15	(1 << 7)	/* Interrupt mask ep 15 */
+
 #define USIR0		__REG(0x40600058)  /* UDC Status Interrupt Register 0 */
+
+#define USIR0_IR0	(1 << 0)	/* Interrup request ep 0 */
+#define USIR0_IR1	(1 << 1)	/* Interrup request ep 1 */
+#define USIR0_IR2	(1 << 2)	/* Interrup request ep 2 */
+#define USIR0_IR3	(1 << 3)	/* Interrup request ep 3 */
+#define USIR0_IR4	(1 << 4)	/* Interrup request ep 4 */
+#define USIR0_IR5	(1 << 5)	/* Interrup request ep 5 */
+#define USIR0_IR6	(1 << 6)	/* Interrup request ep 6 */
+#define USIR0_IR7	(1 << 7)	/* Interrup request ep 7 */
+
 #define USIR1		__REG(0x4060005C)  /* UDC Status Interrupt Register 1 */
 
+#define USIR1_IR8	(1 << 0)	/* Interrup request ep 8 */
+#define USIR1_IR9	(1 << 1)	/* Interrup request ep 9 */
+#define USIR1_IR10	(1 << 2)	/* Interrup request ep 10 */
+#define USIR1_IR11	(1 << 3)	/* Interrup request ep 11 */
+#define USIR1_IR12	(1 << 4)	/* Interrup request ep 12 */
+#define USIR1_IR13	(1 << 5)	/* Interrup request ep 13 */
+#define USIR1_IR14	(1 << 6)	/* Interrup request ep 14 */
+#define USIR1_IR15	(1 << 7)	/* Interrup request ep 15 */
+
 
 /*
  * Fast Infrared Communication Port
@@ -879,6 +1048,22 @@ typedef void            (*ExcpHndlr) (void) ;
 #define PGSR2		__REG(0x40F00028)  /* Power Manager GPIO Sleep State Register for GP[84-64] */
 #define RCSR		__REG(0x40F00030)  /* Reset Controller Status Register */
 
+#define PSSR_RDH	(1 << 5)	/* Read Disable Hold */
+#define PSSR_PH		(1 << 4)	/* Peripheral Control Hold */
+#define PSSR_VFS	(1 << 2)	/* VDD Fault Status */
+#define PSSR_BFS	(1 << 1)	/* Battery Fault Status */
+#define PSSR_SSS	(1 << 0)	/* Software Sleep Status */
+
+#define PCFR_DS		(1 << 3)	/* Deep Sleep Mode */
+#define PCFR_FS		(1 << 2)	/* Float Static Chip Selects */
+#define PCFR_FP		(1 << 1)	/* Float PCMCIA controls */
+#define PCFR_OPDE	(1 << 0)	/* 3.6864 MHz oscillator power-down enable */
+
+#define RCSR_GPR	(1 << 3)	/* GPIO Reset */
+#define RCSR_SMR	(1 << 2)	/* Sleep Mode */
+#define RCSR_WDR	(1 << 1)	/* Watchdog Reset */
+#define RCSR_HWR	(1 << 0)	/* Hardware Reset */
+
 
 /*
  * SSP Serial Port Registers
@@ -1035,3 +1220,19 @@ typedef void            (*ExcpHndlr) (void) ;
 #define MDMRS		__REG(0x48000040)  /* MRS value to be written to SDRAM */
 #define BOOT_DEF	__REG(0x48000044)  /* Read-Only Boot-Time Register. Contains BOOT_SEL and PKG_SEL */
 
+#define MDREFR_K2FREE	(1 << 25)	/* SDRAM Free-Running Control */
+#define MDREFR_K1FREE	(1 << 24)	/* SDRAM Free-Running Control */
+#define MDREFR_K0FREE	(1 << 23)	/* SDRAM Free-Running Control */
+#define MDREFR_SLFRSH	(1 << 22)	/* SDRAM Self-Refresh Control/Status */
+#define MDREFR_APD	(1 << 20)	/* SDRAM/SSRAM Auto-Power-Down Enable */
+#define MDREFR_K2DB2	(1 << 19)	/* SDCLK2 Divide by 2 Control/Status */
+#define MDREFR_K2RUN	(1 << 18)	/* SDCLK2 Run Control/Status */
+#define MDREFR_K1DB2	(1 << 17)	/* SDCLK1 Divide by 2 Control/Status */
+#define MDREFR_K1RUN	(1 << 16)	/* SDCLK1 Run Control/Status */
+#define MDREFR_E1PIN	(1 << 15)	/* SDCKE1 Level Control/Status */
+#define MDREFR_K0DB2	(1 << 14)	/* SDCLK0 Divide by 2 Control/Status */
+#define MDREFR_K0RUN	(1 << 13)	/* SDCLK0 Run Control/Status */
+#define MDREFR_E0PIN	(1 << 12)	/* SDCKE0 Level Control/Status */
+
+
+