ARM: dts: imx: remove obsoleted property fsl,spi-num-chipselects

Since commit b36581df ("spi: imx: Using existing properties for
chipselects") the device tree property 'fsl,spi-num-chipselects' is
unused and it is already marked as obsolete in device tree binding
documentation. Remove the property from the existing DTS files to
avoid its reoccurence on copying.
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

arch/arm/boot/dts/imx1-ads.dts

@@ -38,7 +38,6 @@ clk32 {
 
 &cspi1 {
 	pinctrl-0 = <&pinctrl_cspi1>;
-	fsl,spi-num-chipselects = <1>;
 	cs-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };

arch/arm/boot/dts/imx27-apf27dev.dts

@@ -77,7 +77,6 @@ reg_max5821: regulator@0 {
 };
 
 &cspi1 {
-	fsl,spi-num-chipselects = <1>;
 	cs-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_cspi1 &pinctrl_cspi1_cs>;
@@ -95,7 +94,6 @@ adc@0 {
 };
 
 &cspi2 {
-	fsl,spi-num-chipselects = <3>;
 	cs-gpios = <&gpio4 21 GPIO_ACTIVE_LOW>,
 		   <&gpio4 27 GPIO_ACTIVE_LOW>,
 		   <&gpio2 17 GPIO_ACTIVE_LOW>;

arch/arm/boot/dts/imx27-eukrea-mbimxsd27-baseboard.dts

@@ -81,7 +81,6 @@ reg_lcd: regulator@0 {
 
 &cspi1 {
 	pinctrl-0 = <&pinctrl_cspi1>;
-	fsl,spi-num-chipselects = <1>;
 	cs-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>;
 	status = "okay";
 

arch/arm/boot/dts/imx27-pdk.dts

@@ -37,7 +37,6 @@ usbphy0: usbphy@0 {
 &cspi2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_cspi2>;
-	fsl,spi-num-chipselects = <1>;
 	cs-gpios = <&gpio4 21 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 

arch/arm/boot/dts/imx27-phytec-phycard-s-som.dtsi

@@ -23,7 +23,6 @@ memory {
 };
 
 &cspi1 {
-	fsl,spi-num-chipselects = <2>;
 	cs-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>,
 		   <&gpio4 27 GPIO_ACTIVE_HIGH>;
 	status = "okay";

arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts

@@ -69,7 +69,6 @@ usbphy2: usbphy@2 {
 
 &cspi1 {
 	pinctrl-0 = <&pinctrl_cspi1>, <&pinctrl_cspi1cs1>;
-	fsl,spi-num-chipselects = <2>;
 	cs-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>,
 		   <&gpio4 27 GPIO_ACTIVE_LOW>;
 };

arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi

@@ -75,7 +75,6 @@ pins4 {
 &cspi1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_cspi1>;
-	fsl,spi-num-chipselects = <1>;
 	cs-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 

arch/arm/boot/dts/imx50-evk.dts

@@ -26,7 +26,6 @@ memory {
 &cspi {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_cspi>;
-	fsl,spi-num-chipselects = <2>;
 	cs-gpios = <&gpio4 11 0>, <&gpio4 13 0>;
 	status = "okay";
 

arch/arm/boot/dts/imx51-apf51dev.dts

@@ -80,7 +80,6 @@ user {
 &ecspi1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi1>;
-	fsl,spi-num-chipselects = <2>;
 	cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>,
 		   <&gpio4 25 GPIO_ACTIVE_HIGH>;
 	status = "okay";
@@ -89,7 +88,6 @@ &ecspi1 {
 &ecspi2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi2>;
-	fsl,spi-num-chipselects = <2>;
 	cs-gpios = <&gpio3 28 GPIO_ACTIVE_LOW>,
 		   <&gpio3 27 GPIO_ACTIVE_LOW>;
 	status = "okay";

arch/arm/boot/dts/imx51-babbage.dts

@@ -178,7 +178,6 @@ &audmux {
 &ecspi1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi1>;
-	fsl,spi-num-chipselects = <2>;
 	cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>,
 		   <&gpio4 25 GPIO_ACTIVE_LOW>;
 	status = "okay";

arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi

@@ -24,7 +24,6 @@ memory {
 &ecspi1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi1>;
-	fsl,spi-num-chipselects = <1>;
 	cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 

arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts

@@ -114,7 +114,6 @@ &esdhc1 {
 &ecspi1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi1>;
-	fsl,spi-num-chipselects = <1>;
 	cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
 	status = "okay";
 

arch/arm/boot/dts/imx53-smd.dts

@@ -63,7 +63,6 @@ &uart3 {
 &ecspi1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi1>;
-	fsl,spi-num-chipselects = <2>;
 	cs-gpios = <&gpio2 30 0>, <&gpio3 19 0>;
 	status = "okay";
 

arch/arm/boot/dts/imx53-tqma53.dtsi

@@ -55,7 +55,6 @@ &uart3 {
 &ecspi1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi1>;
-	fsl,spi-num-chipselects = <4>;
 	cs-gpios = <&gpio2 30 0>, <&gpio3 19 0>,
 		   <&gpio3 24 0>, <&gpio3 25 0>;
 	status = "disabled";
@@ -249,7 +248,6 @@ &i2c3 {
 &cspi {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_cspi>;
-	fsl,spi-num-chipselects = <3>;
 	cs-gpios = <&gpio1 18 0>, <&gpio1 19 0>,
 		   <&gpio1 21 0>;
 	status = "disabled";

arch/arm/boot/dts/imx53-tx53.dtsi

@@ -161,7 +161,6 @@ &can2 {
 &ecspi1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi1>;
-	fsl,spi-num-chipselects = <2>;
 	status = "okay";
 
 	cs-gpios = <

arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi

@@ -129,7 +129,6 @@ MX53_PAD_PATA_DATA7__EMI_NANDF_D_7	0xa4
 &ecspi1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi1>;
-	fsl,spi-num-chipselects = <4>;
 	cs-gpios = <&gpio2 30 0>, <&gpio3 19 0>, <&gpio2 16 0>, <&gpio2 17 0>;
 	status = "okay";
 };

arch/arm/boot/dts/imx6dl-aristainetos_4.dts

@@ -66,7 +66,6 @@ display0_in: endpoint {
 };
 
 &ecspi2 {
-	fsl,spi-num-chipselects = <1>;
 	cs-gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi2>;

arch/arm/boot/dts/imx6q-ba16.dtsi

@@ -133,7 +133,6 @@ &audmux {
 };
 
 &ecspi1 {
-	fsl,spi-num-chipselects = <1>;
 	cs-gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi1>;

arch/arm/boot/dts/imx6q-bx50v3.dtsi

@@ -95,7 +95,6 @@ sound {
 };
 
 &ecspi5 {
-	fsl,spi-num-chipselects = <1>;
 	cs-gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi5>;

arch/arm/boot/dts/imx6q-cm-fx6.dts

@@ -122,7 +122,6 @@ &cpu0 {
 };
 
 &ecspi1 {
-	fsl,spi-num-chipselects = <2>;
 	cs-gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>, <&gpio3 19 GPIO_ACTIVE_HIGH>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi1>;

arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts

@@ -104,7 +104,6 @@ &can1 {
 &ecspi5 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi5>;
-	fsl,spi-num-chipselects = <1>;
 	cs-gpios = <&gpio1 12 0>;
 	status = "okay";
 

arch/arm/boot/dts/imx6q-evi.dts

@@ -90,7 +90,6 @@ panel_in: endpoint {
 };
 
 &ecspi1 {
-	fsl,spi-num-chipselects = <1>;
 	cs-gpios = <&gpio4 10 GPIO_ACTIVE_LOW>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi1 &pinctrl_ecspi1cs>;
@@ -98,7 +97,6 @@ &ecspi1 {
 };
 
 &ecspi3 {
-	fsl,spi-num-chipselects = <3>;
 	cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>,
 		<&gpio4 25 GPIO_ACTIVE_LOW>,
 		<&gpio4 26 GPIO_ACTIVE_LOW>;
@@ -108,7 +106,6 @@ &ecspi3 {
 };
 
 &ecspi5 {
-	fsl,spi-num-chipselects = <4>;
 	cs-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>,
 		<&gpio1 13 GPIO_ACTIVE_LOW>,
 		<&gpio1 12 GPIO_ACTIVE_LOW>,

arch/arm/boot/dts/imx6q-gw5400-a.dts

@@ -138,7 +138,6 @@ &audmux {
 };
 
 &ecspi1 {
-	fsl,spi-num-chipselects = <1>;
 	cs-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi1>;

arch/arm/boot/dts/imx6q-marsboard.dts

@@ -97,7 +97,6 @@ &ecspi1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi1>;
 	cs-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>;
-	fsl,spi-num-chipselects = <1>;
 	status = "okay";
 
 	m25p80@0 {

arch/arm/boot/dts/imx6q-novena.dts

@@ -210,7 +210,6 @@ &audmux {
 &ecspi3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi3_novena>;
-	fsl,spi-num-chipselects = <3>;
 	status = "okay";
 };
 

arch/arm/boot/dts/imx6qdl-apalis.dtsi

@@ -175,7 +175,6 @@ &can2 {
 
 /* Apalis SPI1 */
 &ecspi1 {
-	fsl,spi-num-chipselects = <1>;
 	cs-gpios = <&gpio5 25 GPIO_ACTIVE_HIGH>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi1>;
@@ -184,7 +183,6 @@ &ecspi1 {
 
 /* Apalis SPI2 */
 &ecspi2 {
-	fsl,spi-num-chipselects = <1>;
 	cs-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi2>;

arch/arm/boot/dts/imx6qdl-apf6dev.dtsi

@@ -176,7 +176,6 @@ &can2 {
 &ecspi1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi1>;
-	fsl,spi-num-chipselects = <3>;
 	cs-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>,
 		   <&gpio4 10 GPIO_ACTIVE_LOW>,
 		   <&gpio4 11 GPIO_ACTIVE_LOW>;

arch/arm/boot/dts/imx6qdl-aristainetos.dtsi

@@ -100,7 +100,6 @@ rtc@68 {
 };
 
 &ecspi4 {
-	fsl,spi-num-chipselects = <1>;
 	cs-gpios = <&gpio3 20 0>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi4>;

arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi

@@ -114,7 +114,6 @@ &can2 {
 };
 
 &ecspi1 {
-	fsl,spi-num-chipselects = <3>;
 	cs-gpios = <&gpio4 9 GPIO_ACTIVE_HIGH
 		    &gpio4 10 GPIO_ACTIVE_HIGH
 		    &gpio4 11 GPIO_ACTIVE_HIGH>;
@@ -124,7 +123,6 @@ &gpio4 10 GPIO_ACTIVE_HIGH
 };
 
 &ecspi2 {
-	fsl,spi-num-chipselects = <2>;
 	cs-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH &gpio2 27 GPIO_ACTIVE_HIGH>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi2>;
@@ -132,7 +130,6 @@ &ecspi2 {
 };
 
 &ecspi4 {
-	fsl,spi-num-chipselects = <2>;
 	cs-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH &gpio5 2 GPIO_ACTIVE_HIGH>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi4>;

arch/arm/boot/dts/imx6qdl-colibri.dtsi

@@ -138,7 +138,6 @@ &can2 {
 
 /* Colibri SSP */
 &ecspi4 {
-	fsl,spi-num-chipselects = <1>;
 	cs-gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi4>;

arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi

@@ -29,7 +29,6 @@ chosen {
 };
 
 &ecspi3 {
-	fsl,spi-num-chipselects = <1>;
 	cs-gpios = <&gpio4 24 0>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi3>;

arch/arm/boot/dts/imx6qdl-gw52xx.dtsi

@@ -139,7 +139,6 @@ &clks {
 };
 
 &ecspi3 {
-	fsl,spi-num-chipselects = <1>;
 	cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi3>;

arch/arm/boot/dts/imx6qdl-gw54xx.dtsi

@@ -150,7 +150,6 @@ &clks {
 };
 
 &ecspi2 {
-	fsl,spi-num-chipselects = <1>;
 	cs-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi2>;

arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi

@@ -209,7 +209,6 @@ &clks {
 };
 
 &ecspi1 {
-	fsl,spi-num-chipselects = <1>;
 	cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi1>;

arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi

@@ -353,7 +353,6 @@ &clks {
 };
 
 &ecspi1 {
-	fsl,spi-num-chipselects = <1>;
 	cs-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi1>;

arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi

@@ -284,7 +284,6 @@ &clks {
 };
 
 &ecspi1 {
-	fsl,spi-num-chipselects = <1>;
 	cs-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi1>;

arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi

@@ -255,7 +255,6 @@ &clks {
 };
 
 &ecspi1 {
-	fsl,spi-num-chipselects = <1>;
 	cs-gpios = <&gpio3 19 0>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi1>;

arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi

@@ -76,7 +76,6 @@ &ecspi3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi3>;
 	status = "okay";
-	fsl,spi-num-chipselects = <1>;
 	cs-gpios = <&gpio4 24 0>;
 
 	flash@0 {

arch/arm/boot/dts/imx6qdl-rex.dtsi

@@ -89,7 +89,6 @@ &audmux {
 };
 
 &ecspi2 {
-	fsl,spi-num-chipselects = <1>;
 	cs-gpios = <&gpio5 12 GPIO_ACTIVE_LOW>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi2>;
@@ -97,7 +96,6 @@ &ecspi2 {
 };
 
 &ecspi3 {
-	fsl,spi-num-chipselects = <1>;
 	cs-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi3>;

arch/arm/boot/dts/imx6qdl-sabreauto.dtsi

@@ -124,7 +124,6 @@ &clks {
 };
 
 &ecspi1 {
-	fsl,spi-num-chipselects = <1>;
 	cs-gpios = <&gpio3 19 0>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi1 &pinctrl_ecspi1_cs>;

arch/arm/boot/dts/imx6qdl-sabrelite.dtsi

@@ -241,7 +241,6 @@ &clks {
 };
 
 &ecspi1 {
-	fsl,spi-num-chipselects = <1>;
 	cs-gpios = <&gpio3 19 0>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi1>;

arch/arm/boot/dts/imx6qdl-sabresd.dtsi

@@ -160,7 +160,6 @@ &clks {
 };
 
 &ecspi1 {
-	fsl,spi-num-chipselects = <1>;
 	cs-gpios = <&gpio4 9 0>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi1>;

arch/arm/boot/dts/imx6qdl-ts4900.dtsi

@@ -95,7 +95,6 @@ &can2 {
 };
 
 &ecspi1 {
-	fsl,spi-num-chipselects = <1>;
 	cs-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi1>;
@@ -109,7 +108,6 @@ n25q064: flash@0 {
 };
 
 &ecspi2 {
-	fsl,spi-num-chipselects = <1>;
 	cs-gpios = <&gpio6 2 GPIO_ACTIVE_HIGH>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi2>;

arch/arm/boot/dts/imx6qdl-tx6.dtsi

@@ -221,7 +221,6 @@ &can2 {
 &ecspi1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi1>;
-	fsl,spi-num-chipselects = <2>;
 	cs-gpios = <
 		&gpio2 30 GPIO_ACTIVE_HIGH
 		&gpio3 19 GPIO_ACTIVE_HIGH

arch/arm/boot/dts/imx6sl-evk.dts

@@ -117,7 +117,6 @@ &audmux {
 };
 
 &ecspi1 {
-	fsl,spi-num-chipselects = <1>;
 	cs-gpios = <&gpio4 11 0>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi1>;

arch/arm/boot/dts/imx6sx-nitrogen6sx.dts

@@ -142,7 +142,6 @@ &audmux {
 };
 
 &ecspi1 {
-	fsl,spi-num-chipselects = <1>;
 	cs-gpios = <&gpio2 16 GPIO_ACTIVE_LOW>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi1>;

arch/arm/boot/dts/imx6ul-tx6ul.dtsi

@@ -285,7 +285,6 @@ &can2 {
 &ecspi2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi2>;
-	fsl,spi-num-chipselects = <2>;
 	cs-gpios = <
 		&gpio1 29 GPIO_ACTIVE_HIGH
 		&gpio1 10 GPIO_ACTIVE_HIGH

arch/arm/boot/dts/imx7d-sdb.dts

@@ -111,7 +111,6 @@ &cpu0 {
 };
 
 &ecspi3 {
-	fsl,spi-num-chipselects = <1>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi3>;
 	cs-gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>;