Merge tag 'staging-4.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging/IIO driver fixes from Greg KH:
 "Here are a number of small fixes for staging and IIO drivers that
  resolve reported problems.

  Full details are in the shortlog.  All of these have been in
  linux-next with no reported issues"

* tag 'staging-4.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (35 commits)
  arm: dts: rockchip: add reset node for the exist saradc SoCs
  arm64: dts: rockchip: add reset saradc node for rk3368 SoCs
  iio: adc: rockchip_saradc: reset saradc controller before programming it
  iio: accel: kxsd9: Fix raw read return
  iio: adc: ti_am335x_adc: Increase timeout value waiting for ADC sample
  iio: adc: ti_am335x_adc: Protect FIFO1 from concurrent access
  include/linux: fix excess fence.h kernel-doc notation
  staging: wilc1000: correctly check if associatedsta has not been found
  staging: wilc1000: NULL dereference on error
  staging: wilc1000: txq_event: Fix coding error
  MAINTAINERS: Add file patterns for ion device tree bindings
  MAINTAINERS: Update maintainer entry for wilc1000
  iio: chemical: atlas-ph-sensor: fix typo in val assignment
  iio: fix sched WARNING "do not call blocking ops when !TASK_RUNNING"
  staging: comedi: ni_mio_common: fix AO inttrig backwards compatibility
  staging: comedi: dt2811: fix a precedence bug
  staging: comedi: adv_pci1760: Do not return EINVAL for CMDF_ROUND_DOWN.
  staging: comedi: ni_mio_common: fix wrong insn_write handler
  staging: comedi: comedi_test: fix timer race conditions
  staging: comedi: daqboard2000: bug fix board type matching code
  ...

Documentation/devicetree/bindings/iio/adc/rockchip-saradc.txt

@@ -16,6 +16,11 @@ Required properties:
 - vref-supply: The regulator supply ADC reference voltage.
 - #io-channel-cells: Should be 1, see ../iio-bindings.txt
 
+Optional properties:
+- resets: Must contain an entry for each entry in reset-names if need support
+	  this option. See ../reset/reset.txt for details.
+- reset-names: Must include the name "saradc-apb".
+
 Example:
 	saradc: saradc@2006c000 {
 		compatible = "rockchip,saradc";
@@ -23,6 +28,8 @@ Example:
 		interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>;
 		clock-names = "saradc", "apb_pclk";
+		resets = <&cru SRST_SARADC>;
+		reset-names = "saradc-apb";
 		#io-channel-cells = <1>;
 		vref-supply = <&vcc18>;
 	};

MAINTAINERS

@@ -798,6 +798,7 @@ M:	Laura Abbott <labbott@redhat.com>
 M:	Sumit Semwal <sumit.semwal@linaro.org>
 L:	devel@driverdev.osuosl.org
 S:	Supported
+F:	Documentation/devicetree/bindings/staging/ion/
 F:	drivers/staging/android/ion
 F:	drivers/staging/android/uapi/ion.h
 F:	drivers/staging/android/uapi/ion_test.h
@@ -11232,12 +11233,8 @@ S:	Odd Fixes
 F:	drivers/staging/vt665?/
 
 STAGING - WILC1000 WIFI DRIVER
-M:	Johnny Kim <johnny.kim@atmel.com>
-M:	Austin Shin <austin.shin@atmel.com>
-M:	Chris Park <chris.park@atmel.com>
-M:	Tony Cho <tony.cho@atmel.com>
-M:	Glen Lee <glen.lee@atmel.com>
-M:	Leo Kim <leo.kim@atmel.com>
+M:	Aditya Shankar <aditya.shankar@microchip.com>
+M:	Ganesh Krishna <ganesh.krishna@microchip.com>
 L:	linux-wireless@vger.kernel.org
 S:	Supported
 F:	drivers/staging/wilc1000/

arch/arm/boot/dts/rk3066a.dtsi

@@ -197,6 +197,8 @@ tsadc: tsadc@20060000 {
 		clock-names = "saradc", "apb_pclk";
 		interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
 		#io-channel-cells = <1>;
+		resets = <&cru SRST_SARADC>;
+		reset-names = "saradc-apb";
 		status = "disabled";
 	};
 

arch/arm/boot/dts/rk3288.dtsi

@@ -279,6 +279,8 @@ saradc: saradc@ff100000 {
 		#io-channel-cells = <1>;
 		clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>;
 		clock-names = "saradc", "apb_pclk";
+		resets = <&cru SRST_SARADC>;
+		reset-names = "saradc-apb";
 		status = "disabled";
 	};
 

arch/arm/boot/dts/rk3xxx.dtsi

@@ -399,6 +399,8 @@ saradc: saradc@2006c000 {
 		#io-channel-cells = <1>;
 		clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>;
 		clock-names = "saradc", "apb_pclk";
+		resets = <&cru SRST_SARADC>;
+		reset-names = "saradc-apb";
 		status = "disabled";
 	};
 

arch/arm64/boot/dts/rockchip/rk3368.dtsi

@@ -270,6 +270,8 @@ saradc: saradc@ff100000 {
 		#io-channel-cells = <1>;
 		clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>;
 		clock-names = "saradc", "apb_pclk";
+		resets = <&cru SRST_SARADC>;
+		reset-names = "saradc-apb";
 		status = "disabled";
 	};
 

drivers/iio/accel/Kconfig

@@ -20,6 +20,8 @@ config BMA180
 config BMA220
     tristate "Bosch BMA220 3-Axis Accelerometer Driver"
 	depends on SPI
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
     help
       Say yes here to add support for the Bosch BMA220 triaxial
       acceleration sensor.
@@ -234,7 +236,8 @@ config STK8312
 config STK8BA50
 	tristate "Sensortek STK8BA50 3-Axis Accelerometer Driver"
 	depends on I2C
-	depends on IIO_TRIGGER
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
 	help
 	  Say yes here to get support for the Sensortek STK8BA50 3-axis
 	  accelerometer.

drivers/iio/accel/bma220_spi.c

@@ -253,7 +253,7 @@ static int bma220_probe(struct spi_device *spi)
 	if (ret < 0)
 		return ret;
 
-	ret = iio_triggered_buffer_setup(indio_dev, NULL,
+	ret = iio_triggered_buffer_setup(indio_dev, iio_pollfunc_store_time,
 					 bma220_trigger_handler, NULL);
 	if (ret < 0) {
 		dev_err(&spi->dev, "iio triggered buffer setup failed\n");

drivers/iio/accel/kxsd9.c

@@ -160,6 +160,7 @@ static int kxsd9_read_raw(struct iio_dev *indio_dev,
 		if (ret < 0)
 			goto error_ret;
 		*val = ret;
+		ret = IIO_VAL_INT;
 		break;
 	case IIO_CHAN_INFO_SCALE:
 		ret = spi_w8r8(st->us, KXSD9_READ(KXSD9_REG_CTRL_C));

drivers/iio/adc/Kconfig

@@ -389,6 +389,7 @@ config QCOM_SPMI_VADC
 config ROCKCHIP_SARADC
 	tristate "Rockchip SARADC driver"
 	depends on ARCH_ROCKCHIP || (ARM && COMPILE_TEST)
+	depends on RESET_CONTROLLER
 	help
 	  Say yes here to build support for the SARADC found in SoCs from
 	  Rockchip.

drivers/iio/adc/ad799x.c

@@ -527,6 +527,7 @@ static struct attribute_group ad799x_event_attrs_group = {
 static const struct iio_info ad7991_info = {
 	.read_raw = &ad799x_read_raw,
 	.driver_module = THIS_MODULE,
+	.update_scan_mode = ad799x_update_scan_mode,
 };
 
 static const struct iio_info ad7993_4_7_8_noirq_info = {

drivers/iio/adc/at91_adc.c

@@ -381,8 +381,8 @@ static irqreturn_t at91_adc_rl_interrupt(int irq, void *private)
 		st->ts_bufferedmeasure = false;
 		input_report_key(st->ts_input, BTN_TOUCH, 0);
 		input_sync(st->ts_input);
-	} else if (status & AT91_ADC_EOC(3)) {
-		/* Conversion finished */
+	} else if (status & AT91_ADC_EOC(3) && st->ts_input) {
+		/* Conversion finished and we've a touchscreen */
 		if (st->ts_bufferedmeasure) {
 			/*
 			 * Last measurement is always discarded, since it can

drivers/iio/adc/rockchip_saradc.c

@@ -21,6 +21,8 @@
 #include <linux/of_device.h>
 #include <linux/clk.h>
 #include <linux/completion.h>
+#include <linux/delay.h>
+#include <linux/reset.h>
 #include <linux/regulator/consumer.h>
 #include <linux/iio/iio.h>
 
@@ -53,6 +55,7 @@ struct rockchip_saradc {
 	struct clk		*clk;
 	struct completion	completion;
 	struct regulator	*vref;
+	struct reset_control	*reset;
 	const struct rockchip_saradc_data *data;
 	u16			last_val;
 };
@@ -190,6 +193,16 @@ static const struct of_device_id rockchip_saradc_match[] = {
 };
 MODULE_DEVICE_TABLE(of, rockchip_saradc_match);
 
+/**
+ * Reset SARADC Controller.
+ */
+static void rockchip_saradc_reset_controller(struct reset_control *reset)
+{
+	reset_control_assert(reset);
+	usleep_range(10, 20);
+	reset_control_deassert(reset);
+}
+
 static int rockchip_saradc_probe(struct platform_device *pdev)
 {
 	struct rockchip_saradc *info = NULL;
@@ -218,6 +231,20 @@ static int rockchip_saradc_probe(struct platform_device *pdev)
 	if (IS_ERR(info->regs))
 		return PTR_ERR(info->regs);
 
+	/*
+	 * The reset should be an optional property, as it should work
+	 * with old devicetrees as well
+	 */
+	info->reset = devm_reset_control_get(&pdev->dev, "saradc-apb");
+	if (IS_ERR(info->reset)) {
+		ret = PTR_ERR(info->reset);
+		if (ret != -ENOENT)
+			return ret;
+
+		dev_dbg(&pdev->dev, "no reset control found\n");
+		info->reset = NULL;
+	}
+
 	init_completion(&info->completion);
 
 	irq = platform_get_irq(pdev, 0);
@@ -252,6 +279,9 @@ static int rockchip_saradc_probe(struct platform_device *pdev)
 		return PTR_ERR(info->vref);
 	}
 
+	if (info->reset)
+		rockchip_saradc_reset_controller(info->reset);
+
 	/*
 	 * Use a default value for the converter clock.
 	 * This may become user-configurable in the future.

drivers/iio/adc/ti-ads1015.c

@@ -489,7 +489,8 @@ static struct iio_info ads1115_info = {
 #ifdef CONFIG_OF
 static int ads1015_get_channels_config_of(struct i2c_client *client)
 {
-	struct ads1015_data *data = i2c_get_clientdata(client);
+	struct iio_dev *indio_dev = i2c_get_clientdata(client);
+	struct ads1015_data *data = iio_priv(indio_dev);
 	struct device_node *node;
 
 	if (!client->dev.of_node ||

drivers/iio/adc/ti_am335x_adc.c

@@ -32,6 +32,7 @@
 
 struct tiadc_device {
 	struct ti_tscadc_dev *mfd_tscadc;
+	struct mutex fifo1_lock; /* to protect fifo access */
 	int channels;
 	u8 channel_line[8];
 	u8 channel_step[8];
@@ -359,6 +360,7 @@ static int tiadc_read_raw(struct iio_dev *indio_dev,
 		int *val, int *val2, long mask)
 {
 	struct tiadc_device *adc_dev = iio_priv(indio_dev);
+	int ret = IIO_VAL_INT;
 	int i, map_val;
 	unsigned int fifo1count, read, stepid;
 	bool found = false;
@@ -372,13 +374,14 @@ static int tiadc_read_raw(struct iio_dev *indio_dev,
 	if (!step_en)
 		return -EINVAL;
 
+	mutex_lock(&adc_dev->fifo1_lock);
 	fifo1count = tiadc_readl(adc_dev, REG_FIFO1CNT);
 	while (fifo1count--)
 		tiadc_readl(adc_dev, REG_FIFO1);
 
 	am335x_tsc_se_set_once(adc_dev->mfd_tscadc, step_en);
 
-	timeout = jiffies + usecs_to_jiffies
+	timeout = jiffies + msecs_to_jiffies
 				(IDLE_TIMEOUT * adc_dev->channels);
 	/* Wait for Fifo threshold interrupt */
 	while (1) {
@@ -388,7 +391,8 @@ static int tiadc_read_raw(struct iio_dev *indio_dev,
 
 		if (time_after(jiffies, timeout)) {
 			am335x_tsc_se_adc_done(adc_dev->mfd_tscadc);
-			return -EAGAIN;
+			ret = -EAGAIN;
+			goto err_unlock;
 		}
 	}
 	map_val = adc_dev->channel_step[chan->scan_index];
@@ -414,8 +418,11 @@ static int tiadc_read_raw(struct iio_dev *indio_dev,
 	am335x_tsc_se_adc_done(adc_dev->mfd_tscadc);
 
 	if (found == false)
-		return -EBUSY;
-	return IIO_VAL_INT;
+		ret =  -EBUSY;
+
+err_unlock:
+	mutex_unlock(&adc_dev->fifo1_lock);
+	return ret;
 }
 
 static const struct iio_info tiadc_info = {
@@ -483,6 +490,7 @@ static int tiadc_probe(struct platform_device *pdev)
 
 	tiadc_step_config(indio_dev);
 	tiadc_writel(adc_dev, REG_FIFO1THR, FIFO1_THRESHOLD);
+	mutex_init(&adc_dev->fifo1_lock);
 
 	err = tiadc_channel_init(indio_dev, adc_dev->channels);
 	if (err < 0)

drivers/iio/chemical/atlas-ph-sensor.c

@@ -434,7 +434,7 @@ static int atlas_read_raw(struct iio_dev *indio_dev,
 			break;
 		case IIO_ELECTRICALCONDUCTIVITY:
 			*val = 1; /* 0.00001 */
-			*val = 100000;
+			*val2 = 100000;
 			break;
 		case IIO_CONCENTRATION:
 			*val = 0; /* 0.000000001 */

drivers/iio/dac/stx104.c

@@ -65,6 +65,16 @@ struct stx104_gpio {
 	unsigned int out_state;
 };
 
+/**
+ * struct stx104_dev - STX104 device private data structure
+ * @indio_dev:	IIO device
+ * @chip:	instance of the gpio_chip
+ */
+struct stx104_dev {
+	struct iio_dev *indio_dev;
+	struct gpio_chip *chip;
+};
+
 static int stx104_read_raw(struct iio_dev *indio_dev,
 	struct iio_chan_spec const *chan, int *val, int *val2, long mask)
 {
@@ -107,6 +117,7 @@ static const struct iio_chan_spec stx104_channels[STX104_NUM_CHAN] = {
 static int stx104_gpio_get_direction(struct gpio_chip *chip,
 	unsigned int offset)
 {
+	/* GPIO 0-3 are input only, while the rest are output only */
 	if (offset < 4)
 		return 1;
 
@@ -169,6 +180,7 @@ static int stx104_probe(struct device *dev, unsigned int id)
 	struct iio_dev *indio_dev;
 	struct stx104_iio *priv;
 	struct stx104_gpio *stx104gpio;
+	struct stx104_dev *stx104dev;
 	int err;
 
 	indio_dev = devm_iio_device_alloc(dev, sizeof(*priv));
@@ -179,6 +191,10 @@ static int stx104_probe(struct device *dev, unsigned int id)
 	if (!stx104gpio)
 		return -ENOMEM;
 
+	stx104dev = devm_kzalloc(dev, sizeof(*stx104dev), GFP_KERNEL);
+	if (!stx104dev)
+		return -ENOMEM;
+
 	if (!devm_request_region(dev, base[id], STX104_EXTENT,
 		dev_name(dev))) {
 		dev_err(dev, "Unable to lock port addresses (0x%X-0x%X)\n",
@@ -199,12 +215,6 @@ static int stx104_probe(struct device *dev, unsigned int id)
 	outw(0, base[id] + 4);
 	outw(0, base[id] + 6);
 
-	err = devm_iio_device_register(dev, indio_dev);
-	if (err) {
-		dev_err(dev, "IIO device registering failed (%d)\n", err);
-		return err;
-	}
-
 	stx104gpio->chip.label = dev_name(dev);
 	stx104gpio->chip.parent = dev;
 	stx104gpio->chip.owner = THIS_MODULE;
@@ -220,7 +230,9 @@ static int stx104_probe(struct device *dev, unsigned int id)
 
 	spin_lock_init(&stx104gpio->lock);
 
-	dev_set_drvdata(dev, stx104gpio);
+	stx104dev->indio_dev = indio_dev;
+	stx104dev->chip = &stx104gpio->chip;
+	dev_set_drvdata(dev, stx104dev);
 
 	err = gpiochip_add_data(&stx104gpio->chip, stx104gpio);
 	if (err) {
@@ -228,14 +240,22 @@ static int stx104_probe(struct device *dev, unsigned int id)
 		return err;
 	}
 
+	err = iio_device_register(indio_dev);
+	if (err) {
+		dev_err(dev, "IIO device registering failed (%d)\n", err);
+		gpiochip_remove(&stx104gpio->chip);
+		return err;
+	}
+
 	return 0;
 }
 
 static int stx104_remove(struct device *dev, unsigned int id)
 {
-	struct stx104_gpio *const stx104gpio = dev_get_drvdata(dev);
+	struct stx104_dev *const stx104dev = dev_get_drvdata(dev);
 
-	gpiochip_remove(&stx104gpio->chip);
+	iio_device_unregister(stx104dev->indio_dev);
+	gpiochip_remove(stx104dev->chip);
 
 	return 0;
 }

drivers/iio/humidity/Kconfig

@@ -6,6 +6,8 @@ menu "Humidity sensors"
 config AM2315
     tristate "Aosong AM2315 relative humidity and temperature sensor"
     depends on I2C
+    select IIO_BUFFER
+    select IIO_TRIGGERED_BUFFER
     help
       If you say yes here you get support for the Aosong AM2315
       relative humidity and ambient temperature sensor.

drivers/iio/humidity/am2315.c

@@ -244,7 +244,7 @@ static int am2315_probe(struct i2c_client *client,
 	indio_dev->channels = am2315_channels;
 	indio_dev->num_channels = ARRAY_SIZE(am2315_channels);
 
-	ret = iio_triggered_buffer_setup(indio_dev, NULL,
+	ret = iio_triggered_buffer_setup(indio_dev, iio_pollfunc_store_time,
 					 am2315_trigger_handler, NULL);
 	if (ret < 0) {
 		dev_err(&client->dev, "iio triggered buffer setup failed\n");

drivers/iio/humidity/hdc100x.c

@@ -142,7 +142,7 @@ static int hdc100x_get_measurement(struct hdc100x_data *data,
 	struct i2c_client *client = data->client;
 	int delay = data->adc_int_us[chan->address];
 	int ret;
-	int val;
+	__be16 val;
 
 	/* start measurement */
 	ret = i2c_smbus_write_byte(client, chan->address);
@@ -154,26 +154,13 @@ static int hdc100x_get_measurement(struct hdc100x_data *data,
 	/* wait for integration time to pass */
 	usleep_range(delay, delay + 1000);
 
-	/*
-	 * i2c_smbus_read_word_data cannot() be used here due to the command
-	 * value not being understood and causes NAKs preventing any reading
-	 * from being accessed.
-	 */
-	ret = i2c_smbus_read_byte(client);
-	if (ret < 0) {
-		dev_err(&client->dev, "cannot read high byte measurement");
-		return ret;
-	}
-	val = ret << 8;
-
-	ret = i2c_smbus_read_byte(client);
+	/* read measurement */
+	ret = i2c_master_recv(data->client, (char *)&val, sizeof(val));
 	if (ret < 0) {
-		dev_err(&client->dev, "cannot read low byte measurement");
+		dev_err(&client->dev, "cannot read sensor data\n");
 		return ret;
 	}
-	val |= ret;
-
-	return val;
+	return be16_to_cpu(val);
 }
 
 static int hdc100x_get_heater_status(struct hdc100x_data *data)
@@ -272,8 +259,8 @@ static int hdc100x_probe(struct i2c_client *client,
 	struct iio_dev *indio_dev;
 	struct hdc100x_data *data;
 
-	if (!i2c_check_functionality(client->adapter,
-				I2C_FUNC_SMBUS_WORD_DATA | I2C_FUNC_SMBUS_BYTE))
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WORD_DATA |
+				     I2C_FUNC_SMBUS_BYTE | I2C_FUNC_I2C))
 		return -EOPNOTSUPP;
 
 	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));

drivers/iio/industrialio-buffer.c

@@ -107,6 +107,7 @@ ssize_t iio_buffer_read_first_n_outer(struct file *filp, char __user *buf,
 {
 	struct iio_dev *indio_dev = filp->private_data;
 	struct iio_buffer *rb = indio_dev->buffer;
+	DEFINE_WAIT_FUNC(wait, woken_wake_function);
 	size_t datum_size;
 	size_t to_wait;
 	int ret;
@@ -131,19 +132,29 @@ ssize_t iio_buffer_read_first_n_outer(struct file *filp, char __user *buf,
 	else
 		to_wait = min_t(size_t, n / datum_size, rb->watermark);
 
+	add_wait_queue(&rb->pollq, &wait);
 	do {
-		ret = wait_event_interruptible(rb->pollq,
-		      iio_buffer_ready(indio_dev, rb, to_wait, n / datum_size));
-		if (ret)
-			return ret;
+		if (!indio_dev->info) {
+			ret = -ENODEV;
+			break;
+		}
 
-		if (!indio_dev->info)
-			return -ENODEV;
+		if (!iio_buffer_ready(indio_dev, rb, to_wait, n / datum_size)) {
+			if (signal_pending(current)) {
+				ret = -ERESTARTSYS;
+				break;
+			}
+
+			wait_woken(&wait, TASK_INTERRUPTIBLE,
+				   MAX_SCHEDULE_TIMEOUT);
+			continue;
+		}
 
 		ret = rb->access->read_first_n(rb, n, buf);
 		if (ret == 0 && (filp->f_flags & O_NONBLOCK))
 			ret = -EAGAIN;
 	 } while (ret == 0);
+	remove_wait_queue(&rb->pollq, &wait);
 
 	return ret;
 }

drivers/iio/light/Kconfig

@@ -238,6 +238,8 @@ config MAX44000
 	tristate "MAX44000 Ambient and Infrared Proximity Sensor"
 	depends on I2C
 	select REGMAP_I2C
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
 	help
 	 Say Y here if you want to build support for Maxim Integrated's
 	 MAX44000 ambient and infrared proximity sensor device.

drivers/iio/pressure/bmp280-core.c

@@ -970,7 +970,7 @@ int bmp280_common_probe(struct device *dev,
 	data->vdda = devm_regulator_get(dev, "vdda");
 	if (IS_ERR(data->vdda)) {
 		dev_err(dev, "failed to get VDDA regulator\n");
-		ret = PTR_ERR(data->vddd);
+		ret = PTR_ERR(data->vdda);
 		goto out_disable_vddd;
 	}
 	ret = regulator_enable(data->vdda);
@@ -1079,7 +1079,8 @@ EXPORT_SYMBOL(bmp280_common_remove);
 #ifdef CONFIG_PM
 static int bmp280_runtime_suspend(struct device *dev)
 {
-	struct bmp280_data *data = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct bmp280_data *data = iio_priv(indio_dev);
 	int ret;
 
 	ret = regulator_disable(data->vdda);
@@ -1090,7 +1091,8 @@ static int bmp280_runtime_suspend(struct device *dev)
 
 static int bmp280_runtime_resume(struct device *dev)
 {
-	struct bmp280_data *data = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct bmp280_data *data = iio_priv(indio_dev);
 	int ret;
 
 	ret = regulator_enable(data->vddd);

drivers/iio/proximity/as3935.c

@@ -397,7 +397,7 @@ static int as3935_probe(struct spi_device *spi)
 		return ret;
 	}
 
-	ret = iio_triggered_buffer_setup(indio_dev, NULL,
+	ret = iio_triggered_buffer_setup(indio_dev, iio_pollfunc_store_time,
 		&as3935_trigger_handler, NULL);
 
 	if (ret) {

drivers/staging/comedi/drivers/adv_pci1760.c

@@ -196,6 +196,7 @@ static int pci1760_pwm_ns_to_div(unsigned int flags, unsigned int ns)
 		break;
 	case CMDF_ROUND_DOWN:
 		divisor = ns / PCI1760_PWM_TIMEBASE;
+		break;
 	default:
 		return -EINVAL;
 	}

drivers/staging/comedi/drivers/comedi_test.c

@@ -56,11 +56,6 @@
 
 #define N_CHANS 8
 
-enum waveform_state_bits {
-	WAVEFORM_AI_RUNNING,
-	WAVEFORM_AO_RUNNING
-};
-
 /* Data unique to this driver */
 struct waveform_private {
 	struct timer_list ai_timer;	/* timer for AI commands */
@@ -68,7 +63,6 @@ struct waveform_private {
 	unsigned int wf_amplitude;	/* waveform amplitude in microvolts */
 	unsigned int wf_period;		/* waveform period in microseconds */
 	unsigned int wf_current;	/* current time in waveform period */
-	unsigned long state_bits;
 	unsigned int ai_scan_period;	/* AI scan period in usec */
 	unsigned int ai_convert_period;	/* AI conversion period in usec */
 	struct timer_list ao_timer;	/* timer for AO commands */
@@ -191,10 +185,6 @@ static void waveform_ai_timer(unsigned long arg)
 	unsigned int nsamples;
 	unsigned int time_increment;
 
-	/* check command is still active */
-	if (!test_bit(WAVEFORM_AI_RUNNING, &devpriv->state_bits))
-		return;
-
 	now = ktime_to_us(ktime_get());
 	nsamples = comedi_nsamples_left(s, UINT_MAX);
 
@@ -386,11 +376,6 @@ static int waveform_ai_cmd(struct comedi_device *dev,
 	 */
 	devpriv->ai_timer.expires =
 		jiffies + usecs_to_jiffies(devpriv->ai_convert_period) + 1;
-
-	/* mark command as active */
-	smp_mb__before_atomic();
-	set_bit(WAVEFORM_AI_RUNNING, &devpriv->state_bits);
-	smp_mb__after_atomic();
 	add_timer(&devpriv->ai_timer);
 	return 0;
 }
@@ -400,11 +385,12 @@ static int waveform_ai_cancel(struct comedi_device *dev,
 {
 	struct waveform_private *devpriv = dev->private;
 
-	/* mark command as no longer active */
-	clear_bit(WAVEFORM_AI_RUNNING, &devpriv->state_bits);
-	smp_mb__after_atomic();
-	/* cannot call del_timer_sync() as may be called from timer routine */
+	if (in_softirq()) {
+		/* Assume we were called from the timer routine itself. */
 		del_timer(&devpriv->ai_timer);
+	} else {
+		del_timer_sync(&devpriv->ai_timer);
+	}
 	return 0;
 }
 
@@ -436,10 +422,6 @@ static void waveform_ao_timer(unsigned long arg)
 	u64 scans_since;
 	unsigned int scans_avail = 0;
 
-	/* check command is still active */
-	if (!test_bit(WAVEFORM_AO_RUNNING, &devpriv->state_bits))
-		return;
-
 	/* determine number of scan periods since last time */
 	now = ktime_to_us(ktime_get());
 	scans_since = now - devpriv->ao_last_scan_time;
@@ -518,11 +500,6 @@ static int waveform_ao_inttrig_start(struct comedi_device *dev,
 	devpriv->ao_last_scan_time = ktime_to_us(ktime_get());
 	devpriv->ao_timer.expires =
 		jiffies + usecs_to_jiffies(devpriv->ao_scan_period);
-
-	/* mark command as active */
-	smp_mb__before_atomic();
-	set_bit(WAVEFORM_AO_RUNNING, &devpriv->state_bits);
-	smp_mb__after_atomic();
 	add_timer(&devpriv->ao_timer);
 
 	return 1;
@@ -608,11 +585,12 @@ static int waveform_ao_cancel(struct comedi_device *dev,
 	struct waveform_private *devpriv = dev->private;
 
 	s->async->inttrig = NULL;
-	/* mark command as no longer active */
-	clear_bit(WAVEFORM_AO_RUNNING, &devpriv->state_bits);
-	smp_mb__after_atomic();
-	/* cannot call del_timer_sync() as may be called from timer routine */
+	if (in_softirq()) {
+		/* Assume we were called from the timer routine itself. */
 		del_timer(&devpriv->ao_timer);
+	} else {
+		del_timer_sync(&devpriv->ao_timer);
+	}
 	return 0;
 }
 

drivers/staging/comedi/drivers/daqboard2000.c

@@ -634,7 +634,7 @@ static const void *daqboard2000_find_boardinfo(struct comedi_device *dev,
 	const struct daq200_boardtype *board;
 	int i;
 
-	if (pcidev->subsystem_device != PCI_VENDOR_ID_IOTECH)
+	if (pcidev->subsystem_vendor != PCI_VENDOR_ID_IOTECH)
 		return NULL;
 
 	for (i = 0; i < ARRAY_SIZE(boardtypes); i++) {

drivers/staging/comedi/drivers/dt2811.c

@@ -588,8 +588,8 @@ static int dt2811_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	s = &dev->subdevices[0];
 	s->type		= COMEDI_SUBD_AI;
 	s->subdev_flags	= SDF_READABLE |
-			  (it->options[2] == 1) ? SDF_DIFF :
-			  (it->options[2] == 2) ? SDF_COMMON : SDF_GROUND;
+			  ((it->options[2] == 1) ? SDF_DIFF :
+			   (it->options[2] == 2) ? SDF_COMMON : SDF_GROUND);
 	s->n_chan	= (it->options[2] == 1) ? 8 : 16;
 	s->maxdata	= 0x0fff;
 	s->range_table	= board->is_pgh ? &dt2811_pgh_ai_ranges

drivers/staging/comedi/drivers/ni_mio_common.c

@@ -2772,7 +2772,15 @@ static int ni_ao_inttrig(struct comedi_device *dev,
 	int i;
 	static const int timeout = 1000;
 
-	if (trig_num != cmd->start_arg)
+	/*
+	 * Require trig_num == cmd->start_arg when cmd->start_src == TRIG_INT.
+	 * For backwards compatibility, also allow trig_num == 0 when
+	 * cmd->start_src != TRIG_INT (i.e. when cmd->start_src == TRIG_EXT);
+	 * in that case, the internal trigger is being used as a pre-trigger
+	 * before the external trigger.
+	 */
+	if (!(trig_num == cmd->start_arg ||
+	      (trig_num == 0 && cmd->start_src != TRIG_INT)))
 		return -EINVAL;
 
 	/*
@@ -5480,7 +5488,7 @@ static int ni_E_init(struct comedi_device *dev,
 		s->maxdata	= (devpriv->is_m_series) ? 0xffffffff
 							 : 0x00ffffff;
 		s->insn_read	= ni_tio_insn_read;
-		s->insn_write	= ni_tio_insn_read;
+		s->insn_write	= ni_tio_insn_write;
 		s->insn_config	= ni_tio_insn_config;
 #ifdef PCIDMA
 		if (dev->irq && devpriv->mite) {

drivers/staging/iio/impedance-analyzer/ad5933.c

@@ -419,6 +419,7 @@ static ssize_t ad5933_store(struct device *dev,
 	mutex_lock(&indio_dev->mlock);
 	switch ((u32)this_attr->address) {
 	case AD5933_OUT_RANGE:
+		ret = -EINVAL;
 		for (i = 0; i < 4; i++)
 			if (val == st->range_avail[i]) {
 				st->ctrl_hb &= ~AD5933_CTRL_RANGE(0x3);
@@ -426,7 +427,6 @@ static ssize_t ad5933_store(struct device *dev,
 				ret = ad5933_cmd(st, 0);
 				break;
 			}
-		ret = -EINVAL;
 		break;
 	case AD5933_IN_PGA_GAIN:
 		if (sysfs_streq(buf, "1")) {

drivers/staging/lustre/lustre/llite/namei.c

@@ -388,6 +388,7 @@ static int ll_lookup_it_finish(struct ptlrpc_request *request,
 	struct inode *inode = NULL;
 	__u64 bits = 0;
 	int rc = 0;
+	struct dentry *alias;
 
 	/* NB 1 request reference will be taken away by ll_intent_lock()
 	 * when I return
@@ -412,26 +413,12 @@ static int ll_lookup_it_finish(struct ptlrpc_request *request,
 		 */
 	}
 
-	/* Only hash *de if it is unhashed (new dentry).
-	 * Atoimc_open may passing hashed dentries for open.
-	 */
-	if (d_unhashed(*de)) {
-		struct dentry *alias;
-
 	alias = ll_splice_alias(inode, *de);
 	if (IS_ERR(alias)) {
 		rc = PTR_ERR(alias);
 		goto out;
 	}
 	*de = alias;
-	} else if (!it_disposition(it, DISP_LOOKUP_NEG)  &&
-		   !it_disposition(it, DISP_OPEN_CREATE)) {
-		/* With DISP_OPEN_CREATE dentry will be
-		 * instantiated in ll_create_it.
-		 */
-		LASSERT(!d_inode(*de));
-		d_instantiate(*de, inode);
-	}
 
 	if (!it_disposition(it, DISP_LOOKUP_NEG)) {
 		/* we have lookup look - unhide dentry */
@@ -587,6 +574,24 @@ static int ll_atomic_open(struct inode *dir, struct dentry *dentry,
 	       dentry, PFID(ll_inode2fid(dir)), dir, file, open_flags, mode,
 	       *opened);
 
+	/* Only negative dentries enter here */
+	LASSERT(!d_inode(dentry));
+
+	if (!d_in_lookup(dentry)) {
+		/* A valid negative dentry that just passed revalidation,
+		 * there's little point to try and open it server-side,
+		 * even though there's a minuscle chance it might succeed.
+		 * Either way it's a valid race to just return -ENOENT here.
+		 */
+		if (!(open_flags & O_CREAT))
+			return -ENOENT;
+
+		/* Otherwise we just unhash it to be rehashed afresh via
+		 * lookup if necessary
+		 */
+		d_drop(dentry);
+	}
+
 	it = kzalloc(sizeof(*it), GFP_NOFS);
 	if (!it)
 		return -ENOMEM;

drivers/staging/wilc1000/host_interface.c

@@ -3363,7 +3363,7 @@ int wilc_init(struct net_device *dev, struct host_if_drv **hif_drv_handler)
 		if (!hif_workqueue) {
 			netdev_err(vif->ndev, "Failed to create workqueue\n");
 			result = -ENOMEM;
-			goto _fail_mq_;
+			goto _fail_;
 		}
 
 		setup_timer(&periodic_rssi, GetPeriodicRSSI,
@@ -3391,7 +3391,6 @@ int wilc_init(struct net_device *dev, struct host_if_drv **hif_drv_handler)
 
 	clients_count++;
 
-_fail_mq_:
 	destroy_workqueue(hif_workqueue);
 _fail_:
 	return result;

drivers/staging/wilc1000/linux_wlan.c

@@ -648,7 +648,7 @@ void wilc1000_wlan_deinit(struct net_device *dev)
 			mutex_unlock(&wl->hif_cs);
 		}
 		if (&wl->txq_event)
-			wait_for_completion(&wl->txq_event);
+			complete(&wl->txq_event);
 
 		wlan_deinitialize_threads(dev);
 		deinit_irq(dev);

drivers/staging/wilc1000/wilc_wfi_cfgoperations.c

@@ -1191,7 +1191,7 @@ static int get_station(struct wiphy *wiphy, struct net_device *dev,
 	struct wilc_priv *priv;
 	struct wilc_vif *vif;
 	u32 i = 0;
-	u32 associatedsta = 0;
+	u32 associatedsta = ~0;
 	u32 inactive_time = 0;
 	priv = wiphy_priv(wiphy);
 	vif = netdev_priv(dev);
@@ -1204,7 +1204,7 @@ static int get_station(struct wiphy *wiphy, struct net_device *dev,
 			}
 		}
 
-		if (associatedsta == -1) {
+		if (associatedsta == ~0) {
 			netdev_err(dev, "sta required is not associated\n");
 			return -ENOENT;
 		}

include/linux/fence.h

@@ -49,8 +49,6 @@ struct fence_cb;
  * @timestamp: Timestamp when the fence was signaled.
  * @status: Optional, only valid if < 0, must be set before calling
  * fence_signal, indicates that the fence has completed with an error.
- * @child_list: list of children fences
- * @active_list: list of active fences
  *
  * the flags member must be manipulated and read using the appropriate
  * atomic ops (bit_*), so taking the spinlock will not be needed most

include/linux/iio/sw_trigger.h

@@ -62,7 +62,7 @@ void iio_swt_group_init_type_name(struct iio_sw_trigger *t,
 				  const char *name,
 				  struct config_item_type *type)
 {
-#ifdef CONFIG_CONFIGFS_FS
+#if IS_ENABLED(CONFIG_CONFIGFS_FS)
 	config_group_init_type_name(&t->group, name, type);
 #endif
 }

include/linux/mfd/ti_am335x_tscadc.h

@@ -138,16 +138,16 @@
 /*
  * time in us for processing a single channel, calculated as follows:
  *
- * num cycles = open delay + (sample delay + conv time) * averaging
+ * max num cycles = open delay + (sample delay + conv time) * averaging
  *
- * num cycles: 152 + (1 + 13) * 16 = 376
+ * max num cycles: 262143 + (255 + 13) * 16 = 266431
  *
  * clock frequency: 26MHz / 8 = 3.25MHz
  * clock period: 1 / 3.25MHz = 308ns
  *
- * processing time: 376 * 308ns = 116us
+ * max processing time: 266431 * 308ns = 83ms(approx)
  */
-#define IDLE_TIMEOUT 116 /* microsec */
+#define IDLE_TIMEOUT 83 /* milliseconds */
 
 #define TSCADC_CELLS		2
 

tools/iio/iio_generic_buffer.c

@@ -348,7 +348,7 @@ int main(int argc, char **argv)
 	int notrigger = 0;
 	char *dummy;
 
-	struct iio_channel_info *channels;
+	struct iio_channel_info *channels = NULL;
 
 	register_cleanup();