[PATCH] ppc64: SMU driver update & i2c support

The SMU is the "system controller" chip used by Apple recent G5 machines
including the iMac G5.  It drives things like fans, i2c busses, real time
clock, etc...

The current kernel contains a very crude driver that doesn't do much more
than reading the real time clock synchronously.  This is a completely
rewritten driver that provides interrupt based command queuing, a userland
interface, and an i2c/smbus driver for accessing the devices hanging off
the SMU i2c busses like temperature sensors.  This driver is a basic block
for upcoming work on thermal control for those machines, among others.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

arch/ppc/platforms/pmac_setup.c

@@ -719,7 +719,8 @@ pmac_declare_of_platform_devices(void)
 	if (np) {
 		for (np = np->child; np != NULL; np = np->sibling)
 			if (strncmp(np->name, "i2c", 3) == 0) {
-				of_platform_device_create(np, "uni-n-i2c");
+				of_platform_device_create(np, "uni-n-i2c",
+							  NULL);
 				break;
 			}
 	}
@@ -727,17 +728,18 @@ pmac_declare_of_platform_devices(void)
 	if (np) {
 		for (np = np->child; np != NULL; np = np->sibling)
 			if (strncmp(np->name, "i2c", 3) == 0) {
-				of_platform_device_create(np, "u3-i2c");
+				of_platform_device_create(np, "u3-i2c",
+							  NULL);
 				break;
 			}
 	}
 
 	np = find_devices("valkyrie");
 	if (np)
-		of_platform_device_create(np, "valkyrie");
+		of_platform_device_create(np, "valkyrie", NULL);
 	np = find_devices("platinum");
 	if (np)
-		of_platform_device_create(np, "platinum");
+		of_platform_device_create(np, "platinum", NULL);
 
 	return 0;
 }

arch/ppc/syslib/of_device.c

@@ -234,7 +234,9 @@ void of_device_unregister(struct of_device *ofdev)
 	device_unregister(&ofdev->dev);
 }
 
-struct of_device* of_platform_device_create(struct device_node *np, const char *bus_id)
+struct of_device* of_platform_device_create(struct device_node *np,
+					    const char *bus_id,
+					    struct device *parent)
 {
 	struct of_device *dev;
 	u32 *reg;
@@ -247,7 +249,7 @@ struct of_device* of_platform_device_create(struct device_node *np, const char *
 	dev->node = of_node_get(np);
 	dev->dma_mask = 0xffffffffUL;
 	dev->dev.dma_mask = &dev->dma_mask;
-	dev->dev.parent = NULL;
+	dev->dev.parent = parent;
 	dev->dev.bus = &of_platform_bus_type;
 	dev->dev.release = of_release_dev;
 

arch/ppc64/kernel/of_device.c

@@ -233,7 +233,9 @@ void of_device_unregister(struct of_device *ofdev)
 	device_unregister(&ofdev->dev);
 }
 
-struct of_device* of_platform_device_create(struct device_node *np, const char *bus_id)
+struct of_device* of_platform_device_create(struct device_node *np,
+					    const char *bus_id,
+					    struct device *parent)
 {
 	struct of_device *dev;
 
@@ -245,7 +247,7 @@ struct of_device* of_platform_device_create(struct device_node *np, const char *
 	dev->node = np;
 	dev->dma_mask = 0xffffffffUL;
 	dev->dev.dma_mask = &dev->dma_mask;
-	dev->dev.parent = NULL;
+	dev->dev.parent = parent;
 	dev->dev.bus = &of_platform_bus_type;
 	dev->dev.release = of_release_dev;
 
@@ -259,6 +261,7 @@ struct of_device* of_platform_device_create(struct device_node *np, const char *
 	return dev;
 }
 
+
 EXPORT_SYMBOL(of_match_device);
 EXPORT_SYMBOL(of_platform_bus_type);
 EXPORT_SYMBOL(of_register_driver);

arch/ppc64/kernel/pmac_setup.c

@@ -434,16 +434,24 @@ static int pmac_check_legacy_ioport(unsigned int baseport)
 
 static int __init pmac_declare_of_platform_devices(void)
 {
-	struct device_node *np;
+	struct device_node *np, *npp;
 
-	np = find_devices("u3");
-	if (np) {
-		for (np = np->child; np != NULL; np = np->sibling)
+	npp = of_find_node_by_name(NULL, "u3");
+	if (npp) {
+		for (np = NULL; (np = of_get_next_child(npp, np)) != NULL;) {
 			if (strncmp(np->name, "i2c", 3) == 0) {
-				of_platform_device_create(np, "u3-i2c");
+				of_platform_device_create(np, "u3-i2c", NULL);
+				of_node_put(np);
 				break;
 			}
 		}
+		of_node_put(npp);
+	}
+        npp = of_find_node_by_type(NULL, "smu");
+        if (npp) {
+		of_platform_device_create(npp, "smu", NULL);
+		of_node_put(npp);
+	}
 
 	return 0;
 }

arch/ppc64/kernel/pmac_time.c

@@ -84,7 +84,7 @@ void __pmac pmac_get_rtc_time(struct rtc_time *tm)
 
 #ifdef CONFIG_PMAC_SMU
 	case SYS_CTRLER_SMU:
-		smu_get_rtc_time(tm);
+		smu_get_rtc_time(tm, 1);
 		break;
 #endif /* CONFIG_PMAC_SMU */
 	default:
@@ -128,7 +128,7 @@ int __pmac pmac_set_rtc_time(struct rtc_time *tm)
 
 #ifdef CONFIG_PMAC_SMU
 	case SYS_CTRLER_SMU:
-		return smu_set_rtc_time(tm);
+		return smu_set_rtc_time(tm, 1);
 #endif /* CONFIG_PMAC_SMU */
 	default:
 		return -ENODEV;

drivers/i2c/busses/Kconfig

@@ -245,6 +245,18 @@ config I2C_KEYWEST
 	  This support is also available as a module.  If so, the module 
 	  will be called i2c-keywest.
 
+config I2C_PMAC_SMU
+	tristate "Powermac SMU I2C interface"
+	depends on I2C && PMAC_SMU
+	help
+	  This supports the use of the I2C interface in the SMU
+	  chip on recent Apple machines like the iMac G5.  It is used
+	  among others by the thermal control driver for those machines.
+	  Say Y if you have such a machine.
+
+	  This support is also available as a module.  If so, the module
+	  will be called i2c-pmac-smu.
+
 config I2C_MPC
 	tristate "MPC107/824x/85xx/52xx"
 	depends on I2C && PPC32

drivers/i2c/busses/Makefile

@@ -20,6 +20,7 @@ obj-$(CONFIG_I2C_ITE)		+= i2c-ite.o
 obj-$(CONFIG_I2C_IXP2000)	+= i2c-ixp2000.o
 obj-$(CONFIG_I2C_IXP4XX)	+= i2c-ixp4xx.o
 obj-$(CONFIG_I2C_KEYWEST)	+= i2c-keywest.o
+obj-$(CONFIG_I2C_PMAC_SMU)	+= i2c-pmac-smu.o
 obj-$(CONFIG_I2C_MPC)		+= i2c-mpc.o
 obj-$(CONFIG_I2C_MV64XXX)	+= i2c-mv64xxx.o
 obj-$(CONFIG_I2C_NFORCE2)	+= i2c-nforce2.o

drivers/i2c/busses/i2c-pmac-smu.c

+/*
+    i2c Support for Apple SMU Controller
+
+    Copyright (c) 2005 Benjamin Herrenschmidt, IBM Corp.
+                       <benh@kernel.crashing.org>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+
+*/
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/completion.h>
+#include <linux/device.h>
+#include <asm/prom.h>
+#include <asm/of_device.h>
+#include <asm/smu.h>
+
+static int probe;
+
+MODULE_AUTHOR("Benjamin Herrenschmidt <benh@kernel.crashing.org>");
+MODULE_DESCRIPTION("I2C driver for Apple's SMU");
+MODULE_LICENSE("GPL");
+module_param(probe, bool, 0);
+
+
+/* Physical interface */
+struct smu_iface
+{
+	struct i2c_adapter	adapter;
+	struct completion	complete;
+	u32			busid;
+};
+
+static void smu_i2c_done(struct smu_i2c_cmd *cmd, void *misc)
+{
+	struct smu_iface	*iface = misc;
+	complete(&iface->complete);
+}
+
+/*
+ * SMBUS-type transfer entrypoint
+ */
+static s32 smu_smbus_xfer(	struct i2c_adapter*	adap,
+				u16			addr,
+				unsigned short		flags,
+				char			read_write,
+				u8			command,
+				int			size,
+				union i2c_smbus_data*	data)
+{
+	struct smu_iface	*iface = i2c_get_adapdata(adap);
+	struct smu_i2c_cmd	cmd;
+	int			rc = 0;
+	int			read = (read_write == I2C_SMBUS_READ);
+
+	cmd.info.bus = iface->busid;
+	cmd.info.devaddr = (addr << 1) | (read ? 0x01 : 0x00);
+
+	/* Prepare datas & select mode */
+	switch (size) {
+        case I2C_SMBUS_QUICK:
+		cmd.info.type = SMU_I2C_TRANSFER_SIMPLE;
+		cmd.info.datalen = 0;
+	    	break;
+        case I2C_SMBUS_BYTE:
+		cmd.info.type = SMU_I2C_TRANSFER_SIMPLE;
+		cmd.info.datalen = 1;
+		if (!read)
+			cmd.info.data[0] = data->byte;
+	    	break;
+        case I2C_SMBUS_BYTE_DATA:
+		cmd.info.type = SMU_I2C_TRANSFER_STDSUB;
+		cmd.info.datalen = 1;
+		cmd.info.sublen = 1;
+		cmd.info.subaddr[0] = command;
+		cmd.info.subaddr[1] = 0;
+		cmd.info.subaddr[2] = 0;
+		if (!read)
+			cmd.info.data[0] = data->byte;
+	    	break;
+        case I2C_SMBUS_WORD_DATA:
+		cmd.info.type = SMU_I2C_TRANSFER_STDSUB;
+		cmd.info.datalen = 2;
+		cmd.info.sublen = 1;
+		cmd.info.subaddr[0] = command;
+		cmd.info.subaddr[1] = 0;
+		cmd.info.subaddr[2] = 0;
+		if (!read) {
+			cmd.info.data[0] = data->byte & 0xff;
+			cmd.info.data[1] = (data->byte >> 8) & 0xff;
+		}
+		break;
+	/* Note that these are broken vs. the expected smbus API where
+	 * on reads, the lenght is actually returned from the function,
+	 * but I think the current API makes no sense and I don't want
+	 * any driver that I haven't verified for correctness to go
+	 * anywhere near a pmac i2c bus anyway ...
+	 */
+        case I2C_SMBUS_BLOCK_DATA:
+		cmd.info.type = SMU_I2C_TRANSFER_STDSUB;
+		cmd.info.datalen = data->block[0] + 1;
+		if (cmd.info.datalen > 6)
+			return -EINVAL;
+		if (!read)
+			memcpy(cmd.info.data, data->block, cmd.info.datalen);
+		cmd.info.sublen = 1;
+		cmd.info.subaddr[0] = command;
+		cmd.info.subaddr[1] = 0;
+		cmd.info.subaddr[2] = 0;
+		break;
+	case I2C_SMBUS_I2C_BLOCK_DATA:
+		cmd.info.type = SMU_I2C_TRANSFER_STDSUB;
+		cmd.info.datalen = data->block[0];
+		if (cmd.info.datalen > 7)
+			return -EINVAL;
+		if (!read)
+			memcpy(cmd.info.data, &data->block[1],
+			       cmd.info.datalen);
+		cmd.info.sublen = 1;
+		cmd.info.subaddr[0] = command;
+		cmd.info.subaddr[1] = 0;
+		cmd.info.subaddr[2] = 0;
+		break;
+
+        default:
+	    	return -EINVAL;
+	}
+
+	/* Turn a standardsub read into a combined mode access */
+ 	if (read_write == I2C_SMBUS_READ &&
+	    cmd.info.type == SMU_I2C_TRANSFER_STDSUB)
+		cmd.info.type = SMU_I2C_TRANSFER_COMBINED;
+
+	/* Finish filling command and submit it */
+	cmd.done = smu_i2c_done;
+	cmd.misc = iface;
+	rc = smu_queue_i2c(&cmd);
+	if (rc < 0)
+		return rc;
+	wait_for_completion(&iface->complete);
+	rc = cmd.status;
+
+	if (!read || rc < 0)
+		return rc;
+
+	switch (size) {
+        case I2C_SMBUS_BYTE:
+        case I2C_SMBUS_BYTE_DATA:
+		data->byte = cmd.info.data[0];
+	    	break;
+        case I2C_SMBUS_WORD_DATA:
+		data->word = ((u16)cmd.info.data[1]) << 8;
+		data->word |= cmd.info.data[0];
+		break;
+	/* Note that these are broken vs. the expected smbus API where
+	 * on reads, the lenght is actually returned from the function,
+	 * but I think the current API makes no sense and I don't want
+	 * any driver that I haven't verified for correctness to go
+	 * anywhere near a pmac i2c bus anyway ...
+	 */
+        case I2C_SMBUS_BLOCK_DATA:
+	case I2C_SMBUS_I2C_BLOCK_DATA:
+		memcpy(&data->block[0], cmd.info.data, cmd.info.datalen);
+		break;
+	}
+
+	return rc;
+}
+
+static u32
+smu_smbus_func(struct i2c_adapter * adapter)
+{
+	return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
+	       I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
+	       I2C_FUNC_SMBUS_BLOCK_DATA;
+}
+
+/* For now, we only handle combined mode (smbus) */
+static struct i2c_algorithm smu_algorithm = {
+	.smbus_xfer	= smu_smbus_xfer,
+	.functionality	= smu_smbus_func,
+};
+
+static int create_iface(struct device_node *np, struct device *dev)
+{
+	struct smu_iface* iface;
+	u32 *reg, busid;
+	int rc;
+
+	reg = (u32 *)get_property(np, "reg", NULL);
+	if (reg == NULL) {
+		printk(KERN_ERR "i2c-pmac-smu: can't find bus number !\n");
+		return -ENXIO;
+	}
+	busid = *reg;
+
+	iface = kmalloc(sizeof(struct smu_iface), GFP_KERNEL);
+	if (iface == NULL) {
+		printk(KERN_ERR "i2c-pmac-smu: can't allocate inteface !\n");
+		return -ENOMEM;
+	}
+	memset(iface, 0, sizeof(struct smu_iface));
+	init_completion(&iface->complete);
+	iface->busid = busid;
+
+	dev_set_drvdata(dev, iface);
+
+	sprintf(iface->adapter.name, "smu-i2c-%02x", busid);
+	iface->adapter.algo = &smu_algorithm;
+	iface->adapter.algo_data = NULL;
+	iface->adapter.client_register = NULL;
+	iface->adapter.client_unregister = NULL;
+	i2c_set_adapdata(&iface->adapter, iface);
+	iface->adapter.dev.parent = dev;
+
+	rc = i2c_add_adapter(&iface->adapter);
+	if (rc) {
+		printk(KERN_ERR "i2c-pamc-smu.c: Adapter %s registration "
+		       "failed\n", iface->adapter.name);
+		i2c_set_adapdata(&iface->adapter, NULL);
+	}
+
+	if (probe) {
+		unsigned char addr;
+		printk("Probe: ");
+		for (addr = 0x00; addr <= 0x7f; addr++) {
+			if (i2c_smbus_xfer(&iface->adapter,addr,
+					   0,0,0,I2C_SMBUS_QUICK,NULL) >= 0)
+				printk("%02x ", addr);
+		}
+		printk("\n");
+	}
+
+	printk(KERN_INFO "SMU i2c bus %x registered\n", busid);
+
+	return 0;
+}
+
+static int dispose_iface(struct device *dev)
+{
+	struct smu_iface *iface = dev_get_drvdata(dev);
+	int rc;
+
+	rc = i2c_del_adapter(&iface->adapter);
+	i2c_set_adapdata(&iface->adapter, NULL);
+	/* We aren't that prepared to deal with this... */
+	if (rc)
+		printk("i2c-pmac-smu.c: Failed to remove bus %s !\n",
+		       iface->adapter.name);
+	dev_set_drvdata(dev, NULL);
+	kfree(iface);
+
+	return 0;
+}
+
+
+static int create_iface_of_platform(struct of_device* dev,
+				    const struct of_device_id *match)
+{
+	return create_iface(dev->node, &dev->dev);
+}
+
+
+static int dispose_iface_of_platform(struct of_device* dev)
+{
+	return dispose_iface(&dev->dev);
+}
+
+
+static struct of_device_id i2c_smu_match[] =
+{
+	{
+		.compatible	= "smu-i2c",
+	},
+	{},
+};
+static struct of_platform_driver i2c_smu_of_platform_driver =
+{
+	.name 		= "i2c-smu",
+	.match_table	= i2c_smu_match,
+	.probe		= create_iface_of_platform,
+	.remove		= dispose_iface_of_platform
+};
+
+
+static int __init i2c_pmac_smu_init(void)
+{
+	of_register_driver(&i2c_smu_of_platform_driver);
+	return 0;
+}
+
+
+static void __exit i2c_pmac_smu_cleanup(void)
+{
+	of_unregister_driver(&i2c_smu_of_platform_driver);
+}
+
+module_init(i2c_pmac_smu_init);
+module_exit(i2c_pmac_smu_cleanup);

drivers/macintosh/therm_adt746x.c

@@ -599,7 +599,7 @@ thermostat_init(void)
 		sensor_location[2] = "?";
 	}
 
-	of_dev = of_platform_device_create(np, "temperatures");
+	of_dev = of_platform_device_create(np, "temperatures", NULL);
 	
 	if (of_dev == NULL) {
 		printk(KERN_ERR "Can't register temperatures device !\n");

drivers/macintosh/therm_pm72.c

@@ -2051,7 +2051,7 @@ static int __init therm_pm72_init(void)
 			    return -ENODEV;
 		}
 	}
-	of_dev = of_platform_device_create(np, "temperature");
+	of_dev = of_platform_device_create(np, "temperature", NULL);
 	if (of_dev == NULL) {
 		printk(KERN_ERR "Can't register FCU platform device !\n");
 		return -ENODEV;

drivers/macintosh/therm_windtunnel.c

@@ -504,7 +504,7 @@ g4fan_init( void )
 	}
 	if( !(np=of_find_node_by_name(NULL, "fan")) )
 		return -ENODEV;
-	x.of_dev = of_platform_device_create( np, "temperature" );
+	x.of_dev = of_platform_device_create(np, "temperature", NULL);
 	of_node_put( np );
 
 	if( !x.of_dev ) {

include/asm-ppc/macio.h

 #ifndef __MACIO_ASIC_H__
 #define __MACIO_ASIC_H__
 
-#include <linux/mod_devicetable.h>
 #include <asm/of_device.h>
 
 extern struct bus_type macio_bus_type;

include/asm-ppc/of_device.h

@@ -2,6 +2,7 @@
 #define __OF_DEVICE_H__
 
 #include <linux/device.h>
+#include <linux/mod_devicetable.h>
 #include <asm/prom.h>
 
 /*
@@ -55,7 +56,9 @@ extern int of_register_driver(struct of_platform_driver *drv);
 extern void of_unregister_driver(struct of_platform_driver *drv);
 extern int of_device_register(struct of_device *ofdev);
 extern void of_device_unregister(struct of_device *ofdev);
-extern struct of_device *of_platform_device_create(struct device_node *np, const char *bus_id);
+extern struct of_device *of_platform_device_create(struct device_node *np,
+						   const char *bus_id,
+						   struct device *parent);
 extern void of_release_dev(struct device *dev);
 
 #endif /* __OF_DEVICE_H__ */