Skip to content

L
linux
Commit 041110a4 authored by David S. Miller's avatar David S. Miller
Browse files
Options

Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/jkirsher/net-next-2.6

parents a1a5da57 2316aa2a
Show whitespace changes
Inline Side-by-side
Showing with 410 additions and 164 deletions
Documentation/networking/e100.txt
View file @ 041110a4
......@@ -72,7 +72,7 @@ Tx Descriptors: Number of transmit descriptors. A transmit descriptor is a data
ethtool -G eth? tx n, where n is the number of desired tx descriptors.
Speed/Duplex: The driver auto-negotiates the link speed and duplex settings by
default. Ethtool can be used as follows to force speed/duplex.
default. The ethtool utility can be used as follows to force speed/duplex.
ethtool -s eth? autoneg off speed {10|100} duplex {full|half}
......@@ -126,30 +126,21 @@ Additional Configurations
-------
The driver utilizes the ethtool interface for driver configuration and
diagnostics, as well as displaying statistical information. Ethtool
diagnostics, as well as displaying statistical information. The ethtool
version 1.6 or later is required for this functionality.
The latest release of ethtool can be found from
http://sourceforge.net/projects/gkernel.
NOTE: Ethtool 1.6 only supports a limited set of ethtool options. Support
for a more complete ethtool feature set can be enabled by upgrading
ethtool to ethtool-1.8.1.
http://ftp.kernel.org/pub/software/network/ethtool/
Enabling Wake on LAN* (WoL)
---------------------------
WoL is provided through the Ethtool* utility. Ethtool is included with Red
Hat* 8.0. For other Linux distributions, download and install Ethtool from
the following website: http://sourceforge.net/projects/gkernel.
For instructions on enabling WoL with Ethtool, refer to the Ethtool man page.
WoL is provided through the ethtool* utility. For instructions on enabling
WoL with ethtool, refer to the ethtool man page.
WoL will be enabled on the system during the next shut down or reboot. For
this driver version, in order to enable WoL, the e100 driver must be
loaded when shutting down or rebooting the system.
NAPI
----
......
Documentation/networking/e1000.txt
View file @ 041110a4
......@@ -431,15 +431,15 @@ Additional Configurations
Ethtool
-------
The driver utilizes the ethtool interface for driver configuration and
diagnostics, as well as displaying statistical information. Ethtool
diagnostics, as well as displaying statistical information. The ethtool
version 1.6 or later is required for this functionality.
The latest release of ethtool can be found from
http://sourceforge.net/projects/gkernel.
http://ftp.kernel.org/pub/software/network/ethtool/
Enabling Wake on LAN* (WoL)
---------------------------
WoL is configured through the Ethtool* utility.
WoL is configured through the ethtool* utility.
WoL will be enabled on the system during the next shut down or reboot.
For this driver version, in order to enable WoL, the e1000 driver must be
......
Documentation/networking/e1000e.txt
View file @ 041110a4
......@@ -269,26 +269,26 @@ Additional Configurations
-------
The driver utilizes the ethtool interface for driver configuration and
diagnostics, as well as displaying statistical information. We
strongly recommend downloading the latest version of Ethtool at:
strongly recommend downloading the latest version of ethtool at:
http://sourceforge.net/projects/gkernel.
http://ftp.kernel.org/pub/software/network/ethtool/
Speed and Duplex
----------------
Speed and Duplex are configured through the Ethtool* utility. For
instructions, refer to the Ethtool man page.
Speed and Duplex are configured through the ethtool* utility. For
instructions, refer to the ethtool man page.
Enabling Wake on LAN* (WoL)
---------------------------
WoL is configured through the Ethtool* utility. For instructions on
enabling WoL with Ethtool, refer to the Ethtool man page.
WoL is configured through the ethtool* utility. For instructions on
enabling WoL with ethtool, refer to the ethtool man page.
WoL will be enabled on the system during the next shut down or reboot.
For this driver version, in order to enable WoL, the e1000e driver must be
loaded when shutting down or rebooting the system.
In most cases Wake On LAN is only supported on port A for multiple port
adapters. To verify if a port supports Wake on Lan run Ethtool eth<X>.
adapters. To verify if a port supports Wake on Lan run ethtool eth<X>.
Support
=======
......
Documentation/networking/igb.txt
View file @ 041110a4
......@@ -62,15 +62,15 @@ Additional Configurations
-------
The driver utilizes the ethtool interface for driver configuration and
diagnostics, as well as displaying statistical information. The latest
version of Ethtool can be found at:
version of ethtool can be found at:
http://ftp.kernel.org/pub/software/network/ethtool/
Enabling Wake on LAN* (WoL)
---------------------------
WoL is configured through the Ethtool* utility.
WoL is configured through the ethtool* utility.
For instructions on enabling WoL with Ethtool, refer to the Ethtool man page.
For instructions on enabling WoL with ethtool, refer to the ethtool man page.
WoL will be enabled on the system during the next shut down or reboot.
For this driver version, in order to enable WoL, the igb driver must be
......
Documentation/networking/igbvf.txt
View file @ 041110a4
......@@ -58,11 +58,11 @@ Additional Configurations
Ethtool
-------
The driver utilizes the ethtool interface for driver configuration and
diagnostics, as well as displaying statistical information. Ethtool
diagnostics, as well as displaying statistical information. The ethtool
version 3.0 or later is required for this functionality, although we
strongly recommend downloading the latest version at:
http://sourceforge.net/projects/gkernel.
http://ftp.kernel.org/pub/software/network/ethtool/
Support
=======
......
Documentation/networking/ixgb.txt
View file @ 041110a4
......@@ -309,15 +309,15 @@ Additional Configurations
Ethtool
-------
The driver utilizes the ethtool interface for driver configuration and
diagnostics, as well as displaying statistical information. Ethtool
diagnostics, as well as displaying statistical information. The ethtool
version 1.6 or later is required for this functionality.
The latest release of ethtool can be found from
http://sourceforge.net/projects/gkernel
http://ftp.kernel.org/pub/software/network/ethtool/
NOTE: Ethtool 1.6 only supports a limited set of ethtool options. Support
for a more complete ethtool feature set can be enabled by upgrading
to the latest version.
NOTE: The ethtool version 1.6 only supports a limited set of ethtool options.
Support for a more complete ethtool feature set can be enabled by
upgrading to the latest version.
NAPI
......
Documentation/networking/ixgbe.txt
View file @ 041110a4
......@@ -34,7 +34,7 @@ is an Intel(R) Ethernet Server Adapter X520-2, then it only supports Intel
optics and/or the direct attach cables listed below.
When 82599-based SFP+ devices are connected back to back, they should be set to
the same Speed setting via Ethtool. Results may vary if you mix speed settings.
the same Speed setting via ethtool. Results may vary if you mix speed settings.
82598-based adapters support all passive direct attach cables that comply
with SFF-8431 v4.1 and SFF-8472 v10.4 specifications. Active direct attach
cables are not supported.
......@@ -110,7 +110,7 @@ threshold. When rx is enabled, the transmit unit will halt for the time delay
specified when a PAUSE frame is received.
Flow Control is enabled by default. If you want to disable a flow control
capable link partner, use Ethtool:
capable link partner, use ethtool:
ethtool -A eth? autoneg off RX off TX off
......@@ -181,10 +181,10 @@ Additional Configurations
-------
The driver utilizes the ethtool interface for driver configuration and
diagnostics, as well as displaying statistical information. The latest
Ethtool version is required for this functionality.
ethtool version is required for this functionality.
The latest release of ethtool can be found from
http://sourceforge.net/projects/gkernel.
http://ftp.kernel.org/pub/software/network/ethtool/
FCoE
----
......
drivers/net/e1000e/es2lan.c
View file @ 041110a4
......@@ -100,8 +100,8 @@
* with a lower bound at "index" and the upper bound at
* "index + 5".
*/
static const u16 e1000_gg82563_cable_length_table[] =
{ 0, 60, 115, 150, 150, 60, 115, 150, 180, 180, 0xFF };
static const u16 e1000_gg82563_cable_length_table[] = {
0, 60, 115, 150, 150, 60, 115, 150, 180, 180, 0xFF };
#define GG82563_CABLE_LENGTH_TABLE_SIZE \
ARRAY_SIZE(e1000_gg82563_cable_length_table)
......@@ -426,8 +426,8 @@ static void e1000_release_swfw_sync_80003es2lan(struct e1000_hw *hw, u16 mask)
{
u32 swfw_sync;
while (e1000e_get_hw_semaphore(hw) != 0);
/* Empty */
while (e1000e_get_hw_semaphore(hw) != 0)
; /* Empty */
swfw_sync = er32(SW_FW_SYNC);
swfw_sync &= ~mask;
......
drivers/net/e1000e/ethtool.c
View file @ 041110a4
......@@ -45,63 +45,67 @@ struct e1000_stats {
int stat_offset;
};
#define E1000_STAT(m) E1000_STATS, \
sizeof(((struct e1000_adapter *)0)->m), \
offsetof(struct e1000_adapter, m)
#define E1000_NETDEV_STAT(m) NETDEV_STATS, \
sizeof(((struct net_device *)0)->m), \
offsetof(struct net_device, m)
#define E1000_STAT(str, m) { \
.stat_string = str, \
.type = E1000_STATS, \
.sizeof_stat = sizeof(((struct e1000_adapter *)0)->m), \
.stat_offset = offsetof(struct e1000_adapter, m) }
#define E1000_NETDEV_STAT(str, m) { \
.stat_string = str, \
.type = NETDEV_STATS, \
.sizeof_stat = sizeof(((struct net_device *)0)->m), \
.stat_offset = offsetof(struct net_device, m) }
static const struct e1000_stats e1000_gstrings_stats[] = {
{ "rx_packets", E1000_STAT(stats.gprc) },
{ "tx_packets", E1000_STAT(stats.gptc) },
{ "rx_bytes", E1000_STAT(stats.gorc) },
{ "tx_bytes", E1000_STAT(stats.gotc) },
{ "rx_broadcast", E1000_STAT(stats.bprc) },
{ "tx_broadcast", E1000_STAT(stats.bptc) },
{ "rx_multicast", E1000_STAT(stats.mprc) },
{ "tx_multicast", E1000_STAT(stats.mptc) },
{ "rx_errors", E1000_NETDEV_STAT(stats.rx_errors) },
{ "tx_errors", E1000_NETDEV_STAT(stats.tx_errors) },
{ "tx_dropped", E1000_NETDEV_STAT(stats.tx_dropped) },
{ "multicast", E1000_STAT(stats.mprc) },
{ "collisions", E1000_STAT(stats.colc) },
{ "rx_length_errors", E1000_NETDEV_STAT(stats.rx_length_errors) },
{ "rx_over_errors", E1000_NETDEV_STAT(stats.rx_over_errors) },
{ "rx_crc_errors", E1000_STAT(stats.crcerrs) },
{ "rx_frame_errors", E1000_NETDEV_STAT(stats.rx_frame_errors) },
{ "rx_no_buffer_count", E1000_STAT(stats.rnbc) },
{ "rx_missed_errors", E1000_STAT(stats.mpc) },
{ "tx_aborted_errors", E1000_STAT(stats.ecol) },
{ "tx_carrier_errors", E1000_STAT(stats.tncrs) },
{ "tx_fifo_errors", E1000_NETDEV_STAT(stats.tx_fifo_errors) },
{ "tx_heartbeat_errors", E1000_NETDEV_STAT(stats.tx_heartbeat_errors) },
{ "tx_window_errors", E1000_STAT(stats.latecol) },
{ "tx_abort_late_coll", E1000_STAT(stats.latecol) },
{ "tx_deferred_ok", E1000_STAT(stats.dc) },
{ "tx_single_coll_ok", E1000_STAT(stats.scc) },
{ "tx_multi_coll_ok", E1000_STAT(stats.mcc) },
{ "tx_timeout_count", E1000_STAT(tx_timeout_count) },
{ "tx_restart_queue", E1000_STAT(restart_queue) },
{ "rx_long_length_errors", E1000_STAT(stats.roc) },
{ "rx_short_length_errors", E1000_STAT(stats.ruc) },
{ "rx_align_errors", E1000_STAT(stats.algnerrc) },
{ "tx_tcp_seg_good", E1000_STAT(stats.tsctc) },
{ "tx_tcp_seg_failed", E1000_STAT(stats.tsctfc) },
{ "rx_flow_control_xon", E1000_STAT(stats.xonrxc) },
{ "rx_flow_control_xoff", E1000_STAT(stats.xoffrxc) },
{ "tx_flow_control_xon", E1000_STAT(stats.xontxc) },
{ "tx_flow_control_xoff", E1000_STAT(stats.xofftxc) },
{ "rx_long_byte_count", E1000_STAT(stats.gorc) },
{ "rx_csum_offload_good", E1000_STAT(hw_csum_good) },
{ "rx_csum_offload_errors", E1000_STAT(hw_csum_err) },
{ "rx_header_split", E1000_STAT(rx_hdr_split) },
{ "alloc_rx_buff_failed", E1000_STAT(alloc_rx_buff_failed) },
{ "tx_smbus", E1000_STAT(stats.mgptc) },
{ "rx_smbus", E1000_STAT(stats.mgprc) },
{ "dropped_smbus", E1000_STAT(stats.mgpdc) },
{ "rx_dma_failed", E1000_STAT(rx_dma_failed) },
{ "tx_dma_failed", E1000_STAT(tx_dma_failed) },
E1000_STAT("rx_packets", stats.gprc),
E1000_STAT("tx_packets", stats.gptc),
E1000_STAT("rx_bytes", stats.gorc),
E1000_STAT("tx_bytes", stats.gotc),
E1000_STAT("rx_broadcast", stats.bprc),
E1000_STAT("tx_broadcast", stats.bptc),
E1000_STAT("rx_multicast", stats.mprc),
E1000_STAT("tx_multicast", stats.mptc),
E1000_NETDEV_STAT("rx_errors", stats.rx_errors),
E1000_NETDEV_STAT("tx_errors", stats.tx_errors),
E1000_NETDEV_STAT("tx_dropped", stats.tx_dropped),
E1000_STAT("multicast", stats.mprc),
E1000_STAT("collisions", stats.colc),
E1000_NETDEV_STAT("rx_length_errors", stats.rx_length_errors),
E1000_NETDEV_STAT("rx_over_errors", stats.rx_over_errors),
E1000_STAT("rx_crc_errors", stats.crcerrs),
E1000_NETDEV_STAT("rx_frame_errors", stats.rx_frame_errors),
E1000_STAT("rx_no_buffer_count", stats.rnbc),
E1000_STAT("rx_missed_errors", stats.mpc),
E1000_STAT("tx_aborted_errors", stats.ecol),
E1000_STAT("tx_carrier_errors", stats.tncrs),
E1000_NETDEV_STAT("tx_fifo_errors", stats.tx_fifo_errors),
E1000_NETDEV_STAT("tx_heartbeat_errors", stats.tx_heartbeat_errors),
E1000_STAT("tx_window_errors", stats.latecol),
E1000_STAT("tx_abort_late_coll", stats.latecol),
E1000_STAT("tx_deferred_ok", stats.dc),
E1000_STAT("tx_single_coll_ok", stats.scc),
E1000_STAT("tx_multi_coll_ok", stats.mcc),
E1000_STAT("tx_timeout_count", tx_timeout_count),
E1000_STAT("tx_restart_queue", restart_queue),
E1000_STAT("rx_long_length_errors", stats.roc),
E1000_STAT("rx_short_length_errors", stats.ruc),
E1000_STAT("rx_align_errors", stats.algnerrc),
E1000_STAT("tx_tcp_seg_good", stats.tsctc),
E1000_STAT("tx_tcp_seg_failed", stats.tsctfc),
E1000_STAT("rx_flow_control_xon", stats.xonrxc),
E1000_STAT("rx_flow_control_xoff", stats.xoffrxc),
E1000_STAT("tx_flow_control_xon", stats.xontxc),
E1000_STAT("tx_flow_control_xoff", stats.xofftxc),
E1000_STAT("rx_long_byte_count", stats.gorc),
E1000_STAT("rx_csum_offload_good", hw_csum_good),
E1000_STAT("rx_csum_offload_errors", hw_csum_err),
E1000_STAT("rx_header_split", rx_hdr_split),
E1000_STAT("alloc_rx_buff_failed", alloc_rx_buff_failed),
E1000_STAT("tx_smbus", stats.mgptc),
E1000_STAT("rx_smbus", stats.mgprc),
E1000_STAT("dropped_smbus", stats.mgpdc),
E1000_STAT("rx_dma_failed", rx_dma_failed),
E1000_STAT("tx_dma_failed", tx_dma_failed),
};
#define E1000_GLOBAL_STATS_LEN ARRAY_SIZE(e1000_gstrings_stats)
......@@ -749,8 +753,8 @@ static bool reg_pattern_test(struct e1000_adapter *adapter, u64 *data,
int reg, int offset, u32 mask, u32 write)
{
u32 pat, val;
static const u32 test[] =
{0x5A5A5A5A, 0xA5A5A5A5, 0x00000000, 0xFFFFFFFF};
static const u32 test[] = {
0x5A5A5A5A, 0xA5A5A5A5, 0x00000000, 0xFFFFFFFF};
for (pat = 0; pat < ARRAY_SIZE(test); pat++) {
E1000_WRITE_REG_ARRAY(&adapter->hw, reg, offset,
(test[pat] & write));
......
drivers/net/e1000e/ich8lan.c
View file @ 041110a4
......@@ -2309,11 +2309,10 @@ static s32 e1000_read_flash_data_ich8lan(struct e1000_hw *hw, u32 offset,
*/
if (ret_val == 0) {
flash_data = er32flash(ICH_FLASH_FDATA0);
if (size == 1) {
if (size == 1)
*data = (u8)(flash_data & 0x000000FF);
} else if (size == 2) {
else if (size == 2)
*data = (u16)(flash_data & 0x0000FFFF);
}
break;
} else {
/*
......
drivers/net/e1000e/lib.c
View file @ 041110a4
......@@ -493,9 +493,8 @@ s32 e1000e_check_for_copper_link(struct e1000_hw *hw)
* different link partner.
*/
ret_val = e1000e_config_fc_after_link_up(hw);
if (ret_val) {
if (ret_val)
e_dbg("Error configuring flow control\n");
}
return ret_val;
}
......@@ -1496,9 +1495,8 @@ s32 e1000e_setup_led_generic(struct e1000_hw *hw)
{
u32 ledctl;
if (hw->mac.ops.setup_led != e1000e_setup_led_generic) {
if (hw->mac.ops.setup_led != e1000e_setup_led_generic)
return -E1000_ERR_CONFIG;
}
if (hw->phy.media_type == e1000_media_type_fiber) {
ledctl = er32(LEDCTL);
......
drivers/net/e1000e/netdev.c
View file @ 041110a4
......@@ -1325,7 +1325,7 @@ static bool e1000_clean_jumbo_rx_irq(struct e1000_adapter *adapter,
goto next_desc;
}
#define rxtop rx_ring->rx_skb_top
#define rxtop (rx_ring->rx_skb_top)
if (!(status & E1000_RXD_STAT_EOP)) {
/* this descriptor is only the beginning (or middle) */
if (!rxtop) {
......@@ -1806,10 +1806,9 @@ void e1000e_set_interrupt_capability(struct e1000_adapter *adapter)
err = pci_enable_msix(adapter->pdev,
adapter->msix_entries,
adapter->num_vectors);
if (err == 0) {
if (err == 0)
return;
}
}
/* MSI-X failed, so fall through and try MSI */
e_err("Failed to initialize MSI-X interrupts. "
"Falling back to MSI interrupts.\n");
......@@ -2198,9 +2197,8 @@ void e1000e_free_rx_resources(struct e1000_adapter *adapter)
e1000_clean_rx_ring(adapter);
for (i = 0; i < rx_ring->count; i++) {
for (i = 0; i < rx_ring->count; i++)
kfree(rx_ring->buffer_info[i].ps_pages);
}
vfree(rx_ring->buffer_info);
rx_ring->buffer_info = NULL;
......@@ -2240,20 +2238,18 @@ static unsigned int e1000_update_itr(struct e1000_adapter *adapter,
/* handle TSO and jumbo frames */
if (bytes/packets > 8000)
retval = bulk_latency;
else if ((packets < 5) && (bytes > 512)) {
else if ((packets < 5) && (bytes > 512))
retval = low_latency;
}
break;
case low_latency: /* 50 usec aka 20000 ints/s */
if (bytes > 10000) {
/* this if handles the TSO accounting */
if (bytes/packets > 8000) {
if (bytes/packets > 8000)
retval = bulk_latency;
} else if ((packets < 10) || ((bytes/packets) > 1200)) {
else if ((packets < 10) || ((bytes/packets) > 1200))
retval = bulk_latency;
} else if ((packets > 35)) {
else if ((packets > 35))
retval = lowest_latency;
}
} else if (bytes/packets > 2000) {
retval = bulk_latency;
} else if (packets <= 2 && bytes < 512) {
......@@ -2262,9 +2258,8 @@ static unsigned int e1000_update_itr(struct e1000_adapter *adapter,
break;
case bulk_latency: /* 250 usec aka 4000 ints/s */
if (bytes > 25000) {
if (packets > 35) {
if (packets > 35)
retval = low_latency;
}
} else if (bytes < 6000) {
retval = low_latency;
}
......
drivers/net/e1000e/phy.c
View file @ 041110a4
......@@ -42,13 +42,13 @@ static s32 e1000_access_phy_debug_regs_hv(struct e1000_hw *hw, u32 offset,
u16 *data, bool read);
/* Cable length tables */
static const u16 e1000_m88_cable_length_table[] =
{ 0, 50, 80, 110, 140, 140, E1000_CABLE_LENGTH_UNDEFINED };
static const u16 e1000_m88_cable_length_table[] = {
0, 50, 80, 110, 140, 140, E1000_CABLE_LENGTH_UNDEFINED };
#define M88E1000_CABLE_LENGTH_TABLE_SIZE \
ARRAY_SIZE(e1000_m88_cable_length_table)
static const u16 e1000_igp_2_cable_length_table[] =
{ 0, 0, 0, 0, 0, 0, 0, 0, 3, 5, 8, 11, 13, 16, 18, 21, 0, 0, 0, 3,
static const u16 e1000_igp_2_cable_length_table[] = {
0, 0, 0, 0, 0, 0, 0, 0, 3, 5, 8, 11, 13, 16, 18, 21, 0, 0, 0, 3,
6, 10, 13, 16, 19, 23, 26, 29, 32, 35, 38, 41, 6, 10, 14, 18, 22,
26, 30, 33, 37, 41, 44, 48, 51, 54, 58, 61, 21, 26, 31, 35, 40,
44, 49, 53, 57, 61, 65, 68, 72, 75, 79, 82, 40, 45, 51, 56, 61,
......@@ -1057,9 +1057,8 @@ static s32 e1000_phy_setup_autoneg(struct e1000_hw *hw)
e_dbg("Auto-Neg Advertising %x\n", mii_autoneg_adv_reg);
if (phy->autoneg_mask & ADVERTISE_1000_FULL) {
if (phy->autoneg_mask & ADVERTISE_1000_FULL)
ret_val = e1e_wphy(hw, PHY_1000T_CTRL, mii_1000t_ctrl_reg);
}
return ret_val;
}
......
drivers/net/igb/e1000_82575.c
View file @ 041110a4
......@@ -134,6 +134,8 @@ static s32 igb_get_invariants_82575(struct e1000_hw *hw)
case E1000_DEV_ID_82580_COPPER_DUAL:
case E1000_DEV_ID_DH89XXCC_SGMII:
case E1000_DEV_ID_DH89XXCC_SERDES:
case E1000_DEV_ID_DH89XXCC_BACKPLANE:
case E1000_DEV_ID_DH89XXCC_SFP:
mac->type = e1000_82580;
break;
case E1000_DEV_ID_I350_COPPER:
......@@ -1477,6 +1479,39 @@ static s32 igb_set_pcie_completion_timeout(struct e1000_hw *hw)
return ret_val;
}
/**
* igb_vmdq_set_anti_spoofing_pf - enable or disable anti-spoofing
* @hw: pointer to the hardware struct
* @enable: state to enter, either enabled or disabled
* @pf: Physical Function pool - do not set anti-spoofing for the PF
*
* enables/disables L2 switch anti-spoofing functionality.
**/
void igb_vmdq_set_anti_spoofing_pf(struct e1000_hw *hw, bool enable, int pf)
{
u32 dtxswc;
switch (hw->mac.type) {
case e1000_82576:
case e1000_i350:
dtxswc = rd32(E1000_DTXSWC);
if (enable) {
dtxswc |= (E1000_DTXSWC_MAC_SPOOF_MASK |
E1000_DTXSWC_VLAN_SPOOF_MASK);
/* The PF can spoof - it has to in order to
* support emulation mode NICs */
dtxswc ^= (1 << pf | 1 << (pf + MAX_NUM_VFS));
} else {
dtxswc &= ~(E1000_DTXSWC_MAC_SPOOF_MASK |
E1000_DTXSWC_VLAN_SPOOF_MASK);
}
wr32(E1000_DTXSWC, dtxswc);
break;
default:
break;
}
}
/**
* igb_vmdq_set_loopback_pf - enable or disable vmdq loopback
* @hw: pointer to the hardware struct
......@@ -1578,7 +1613,7 @@ static s32 igb_reset_mdicnfg_82580(struct e1000_hw *hw)
{
s32 ret_val = 0;
u32 mdicnfg;
u16 nvm_data;
u16 nvm_data = 0;
if (hw->mac.type != e1000_82580)
goto out;
......
drivers/net/igb/e1000_82575.h
View file @ 041110a4
......@@ -194,6 +194,10 @@ struct e1000_adv_tx_context_desc {
#define E1000_NVM_APME_82575 0x0400
#define MAX_NUM_VFS 8
#define E1000_DTXSWC_MAC_SPOOF_MASK 0x000000FF /* Per VF MAC spoof control */
#define E1000_DTXSWC_VLAN_SPOOF_MASK 0x0000FF00 /* Per VF VLAN spoof control */
#define E1000_DTXSWC_LLE_MASK 0x00FF0000 /* Per VF Local LB enables */
#define E1000_DTXSWC_VLAN_SPOOF_SHIFT 8
#define E1000_DTXSWC_VMDQ_LOOPBACK_EN (1 << 31) /* global VF LB enable */
/* Easy defines for setting default pool, would normally be left a zero */
......@@ -243,6 +247,7 @@ struct e1000_adv_tx_context_desc {
/* RX packet buffer size defines */
#define E1000_RXPBS_SIZE_MASK_82576 0x0000007F
void igb_vmdq_set_anti_spoofing_pf(struct e1000_hw *, bool, int);
void igb_vmdq_set_loopback_pf(struct e1000_hw *, bool);
void igb_vmdq_set_replication_pf(struct e1000_hw *, bool);
u16 igb_rxpbs_adjust_82580(u32 data);
......
drivers/net/igb/e1000_hw.h
View file @ 041110a4
......@@ -54,8 +54,10 @@ struct e1000_hw;
#define E1000_DEV_ID_82580_SERDES 0x1510
#define E1000_DEV_ID_82580_SGMII 0x1511
#define E1000_DEV_ID_82580_COPPER_DUAL 0x1516
#define E1000_DEV_ID_DH89XXCC_SGMII 0x0436
#define E1000_DEV_ID_DH89XXCC_SERDES 0x0438
#define E1000_DEV_ID_DH89XXCC_SGMII 0x0438
#define E1000_DEV_ID_DH89XXCC_SERDES 0x043A
#define E1000_DEV_ID_DH89XXCC_BACKPLANE 0x043C
#define E1000_DEV_ID_DH89XXCC_SFP 0x0440
#define E1000_DEV_ID_I350_COPPER 0x1521
#define E1000_DEV_ID_I350_FIBER 0x1522
#define E1000_DEV_ID_I350_SERDES 0x1523
......
drivers/net/igb/e1000_regs.h
View file @ 041110a4
......@@ -301,6 +301,7 @@
#define E1000_VFTE 0x00C90 /* VF Transmit Enables */
#define E1000_QDE 0x02408 /* Queue Drop Enable - RW */
#define E1000_DTXSWC 0x03500 /* DMA Tx Switch Control - RW */
#define E1000_WVBR 0x03554 /* VM Wrong Behavior - RWS */
#define E1000_RPLOLR 0x05AF0 /* Replication Offload - RW */
#define E1000_UTA 0x0A000 /* Unicast Table Array - RW */
#define E1000_IOVTCL 0x05BBC /* IOV Control Register */
......
drivers/net/igb/igb.h
View file @ 041110a4
......@@ -324,6 +324,7 @@ struct igb_adapter {
unsigned int vfs_allocated_count;
struct vf_data_storage *vf_data;
u32 rss_queues;
u32 wvbr;
};
#define IGB_FLAG_HAS_MSI (1 << 0)
......
drivers/net/igb/igb_main.c
View file @ 041110a4
......@@ -73,6 +73,8 @@ static DEFINE_PCI_DEVICE_TABLE(igb_pci_tbl) = {
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82580_COPPER_DUAL), board_82575 },
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_DH89XXCC_SGMII), board_82575 },
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_DH89XXCC_SERDES), board_82575 },
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_DH89XXCC_BACKPLANE), board_82575 },
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_DH89XXCC_SFP), board_82575 },
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82576), board_82575 },
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_NS), board_82575 },
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_NS_SERDES), board_82575 },
......@@ -1654,7 +1656,7 @@ void igb_reset(struct igb_adapter *adapter)
if (adapter->vfs_allocated_count) {
int i;
for (i = 0 ; i < adapter->vfs_allocated_count; i++)
adapter->vf_data[i].flags = 0;
adapter->vf_data[i].flags &= IGB_VF_FLAG_PF_SET_MAC;
/* ping all the active vfs to let them know we are going down */
igb_ping_all_vfs(adapter);
......@@ -3364,6 +3366,45 @@ static void igb_set_rx_mode(struct net_device *netdev)
igb_restore_vf_multicasts(adapter);
}
static void igb_check_wvbr(struct igb_adapter *adapter)
{
struct e1000_hw *hw = &adapter->hw;
u32 wvbr = 0;
switch (hw->mac.type) {
case e1000_82576:
case e1000_i350:
if (!(wvbr = rd32(E1000_WVBR)))
return;
break;
default:
break;
}
adapter->wvbr |= wvbr;
}
#define IGB_STAGGERED_QUEUE_OFFSET 8
static void igb_spoof_check(struct igb_adapter *adapter)
{
int j;
if (!adapter->wvbr)
return;
for(j = 0; j < adapter->vfs_allocated_count; j++) {
if (adapter->wvbr & (1 << j) ||
adapter->wvbr & (1 << (j + IGB_STAGGERED_QUEUE_OFFSET))) {
dev_warn(&adapter->pdev->dev,
"Spoof event(s) detected on VF %d\n", j);
adapter->wvbr &=
~((1 << j) |
(1 << (j + IGB_STAGGERED_QUEUE_OFFSET)));
}
}
}
/* Need to wait a few seconds after link up to get diagnostic information from
* the phy */
static void igb_update_phy_info(unsigned long data)
......@@ -3523,6 +3564,8 @@ static void igb_watchdog_task(struct work_struct *work)
wr32(E1000_ICS, E1000_ICS_RXDMT0);
}
igb_spoof_check(adapter);
/* Reset the timer */
if (!test_bit(__IGB_DOWN, &adapter->state))
mod_timer(&adapter->watchdog_timer,
......@@ -4519,6 +4562,10 @@ static irqreturn_t igb_msix_other(int irq, void *data)
if (icr & E1000_ICR_DOUTSYNC) {
/* HW is reporting DMA is out of sync */
adapter->stats.doosync++;
/* The DMA Out of Sync is also indication of a spoof event
* in IOV mode. Check the Wrong VM Behavior register to
* see if it is really a spoof event. */
igb_check_wvbr(adapter);
}
/* Check for a mailbox event */
......@@ -4971,8 +5018,8 @@ static int igb_set_vf_vlan(struct igb_adapter *adapter, u32 *msgbuf, u32 vf)
static inline void igb_vf_reset(struct igb_adapter *adapter, u32 vf)
{
/* clear flags */
adapter->vf_data[vf].flags &= ~(IGB_VF_FLAG_PF_SET_MAC);
/* clear flags - except flag that indicates PF has set the MAC */
adapter->vf_data[vf].flags &= IGB_VF_FLAG_PF_SET_MAC;
adapter->vf_data[vf].last_nack = jiffies;
/* reset offloads to defaults */
......@@ -5026,7 +5073,7 @@ static void igb_vf_reset_msg(struct igb_adapter *adapter, u32 vf)
reg = rd32(E1000_VFRE);
wr32(E1000_VFRE, reg | (1 << vf));
adapter->vf_data[vf].flags = IGB_VF_FLAG_CTS;
adapter->vf_data[vf].flags |= IGB_VF_FLAG_CTS;
/* reply to reset with ack and vf mac address */
msgbuf[0] = E1000_VF_RESET | E1000_VT_MSGTYPE_ACK;
......@@ -5105,7 +5152,14 @@ static void igb_rcv_msg_from_vf(struct igb_adapter *adapter, u32 vf)
switch ((msgbuf[0] & 0xFFFF)) {
case E1000_VF_SET_MAC_ADDR:
retval = -EINVAL;
if (!(vf_data->flags & IGB_VF_FLAG_PF_SET_MAC))
retval = igb_set_vf_mac_addr(adapter, msgbuf, vf);
else
dev_warn(&pdev->dev,
"VF %d attempted to override administratively "
"set MAC address\nReload the VF driver to "
"resume operations\n", vf);
break;
case E1000_VF_SET_PROMISC:
retval = igb_set_vf_promisc(adapter, msgbuf, vf);
......@@ -5117,8 +5171,12 @@ static void igb_rcv_msg_from_vf(struct igb_adapter *adapter, u32 vf)
retval = igb_set_vf_rlpml(adapter, msgbuf[1], vf);
break;
case E1000_VF_SET_VLAN:
if (adapter->vf_data[vf].pf_vlan)
retval = -1;
if (vf_data->pf_vlan)
dev_warn(&pdev->dev,
"VF %d attempted to override administratively "
"set VLAN tag\nReload the VF driver to "
"resume operations\n", vf);
else
retval = igb_set_vf_vlan(adapter, msgbuf, vf);
break;
......@@ -6582,6 +6640,8 @@ static void igb_vmm_control(struct igb_adapter *adapter)
if (adapter->vfs_allocated_count) {
igb_vmdq_set_loopback_pf(hw, true);
igb_vmdq_set_replication_pf(hw, true);
igb_vmdq_set_anti_spoofing_pf(hw, true,
adapter->vfs_allocated_count);
} else {
igb_vmdq_set_loopback_pf(hw, false);
igb_vmdq_set_replication_pf(hw, false);
......
drivers/net/igbvf/igbvf.h
View file @ 041110a4
......@@ -97,6 +97,7 @@ struct igbvf_adapter;
enum igbvf_boards {
board_vf,
board_i350_vf,
};
struct igbvf_queue_stats {
......
drivers/net/igbvf/netdev.c
View file @ 041110a4
......@@ -64,8 +64,16 @@ static struct igbvf_info igbvf_vf_info = {
.init_ops = e1000_init_function_pointers_vf,
};
static struct igbvf_info igbvf_i350_vf_info = {
.mac = e1000_vfadapt_i350,
.flags = 0,
.pba = 10,
.init_ops = e1000_init_function_pointers_vf,
};
static const struct igbvf_info *igbvf_info_tbl[] = {
[board_vf] = &igbvf_vf_info,
[board_i350_vf] = &igbvf_i350_vf_info,
};
/**
......@@ -2865,6 +2873,7 @@ static struct pci_error_handlers igbvf_err_handler = {
static DEFINE_PCI_DEVICE_TABLE(igbvf_pci_tbl) = {
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_VF), board_vf },
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_I350_VF), board_i350_vf },
{ } /* terminate list */
};
MODULE_DEVICE_TABLE(pci, igbvf_pci_tbl);
......
drivers/net/igbvf/vf.c
View file @ 041110a4
......@@ -362,8 +362,8 @@ static s32 e1000_check_for_link_vf(struct e1000_hw *hw)
* or a virtual function reset
*/
/* If we were hit with a reset drop the link */
if (!mbx->ops.check_for_rst(hw))
/* If we were hit with a reset or timeout drop the link */
if (!mbx->ops.check_for_rst(hw) || !mbx->timeout)
mac->get_link_status = true;
if (!mac->get_link_status)
......
drivers/net/igbvf/vf.h
View file @ 041110a4
......@@ -39,6 +39,7 @@
struct e1000_hw;
#define E1000_DEV_ID_82576_VF 0x10CA
#define E1000_DEV_ID_I350_VF 0x1520
#define E1000_REVISION_0 0
#define E1000_REVISION_1 1
#define E1000_REVISION_2 2
......@@ -133,6 +134,7 @@ struct e1000_adv_tx_context_desc {
enum e1000_mac_type {
e1000_undefined = 0,
e1000_vfadapt,
e1000_vfadapt_i350,
e1000_num_macs /* List is 1-based, so subtract 1 for true count. */
};
......
drivers/net/ixgbe/ixgbe_82599.c
View file @ 041110a4
......@@ -2165,6 +2165,8 @@ static struct ixgbe_mac_operations mac_ops_82599 = {
.fc_enable = &ixgbe_fc_enable_generic,
.init_uta_tables = &ixgbe_init_uta_tables_generic,
.setup_sfp = &ixgbe_setup_sfp_modules_82599,
.set_mac_anti_spoofing = &ixgbe_set_mac_anti_spoofing,
.set_vlan_anti_spoofing = &ixgbe_set_vlan_anti_spoofing,
};
static struct ixgbe_eeprom_operations eeprom_ops_82599 = {
......
drivers/net/ixgbe/ixgbe_common.c
View file @ 041110a4
......@@ -2809,3 +2809,67 @@ s32 ixgbe_get_wwn_prefix_generic(struct ixgbe_hw *hw, u16 *wwnn_prefix,
wwn_prefix_out:
return 0;
}
/**
* ixgbe_set_mac_anti_spoofing - Enable/Disable MAC anti-spoofing
* @hw: pointer to hardware structure
* @enable: enable or disable switch for anti-spoofing
* @pf: Physical Function pool - do not enable anti-spoofing for the PF
*
**/
void ixgbe_set_mac_anti_spoofing(struct ixgbe_hw *hw, bool enable, int pf)
{
int j;
int pf_target_reg = pf >> 3;
int pf_target_shift = pf % 8;
u32 pfvfspoof = 0;
if (hw->mac.type == ixgbe_mac_82598EB)
return;
if (enable)
pfvfspoof = IXGBE_SPOOF_MACAS_MASK;
/*
* PFVFSPOOF register array is size 8 with 8 bits assigned to
* MAC anti-spoof enables in each register array element.
*/
for (j = 0; j < IXGBE_PFVFSPOOF_REG_COUNT; j++)
IXGBE_WRITE_REG(hw, IXGBE_PFVFSPOOF(j), pfvfspoof);
/* If not enabling anti-spoofing then done */
if (!enable)
return;
/*
* The PF should be allowed to spoof so that it can support
* emulation mode NICs. Reset the bit assigned to the PF
*/
pfvfspoof = IXGBE_READ_REG(hw, IXGBE_PFVFSPOOF(pf_target_reg));
pfvfspoof ^= (1 << pf_target_shift);
IXGBE_WRITE_REG(hw, IXGBE_PFVFSPOOF(pf_target_reg), pfvfspoof);
}
/**
* ixgbe_set_vlan_anti_spoofing - Enable/Disable VLAN anti-spoofing
* @hw: pointer to hardware structure
* @enable: enable or disable switch for VLAN anti-spoofing
* @pf: Virtual Function pool - VF Pool to set for VLAN anti-spoofing
*
**/
void ixgbe_set_vlan_anti_spoofing(struct ixgbe_hw *hw, bool enable, int vf)
{
int vf_target_reg = vf >> 3;
int vf_target_shift = vf % 8 + IXGBE_SPOOF_VLANAS_SHIFT;
u32 pfvfspoof;
if (hw->mac.type == ixgbe_mac_82598EB)
return;
pfvfspoof = IXGBE_READ_REG(hw, IXGBE_PFVFSPOOF(vf_target_reg));
if (enable)
pfvfspoof |= (1 << vf_target_shift);
else
pfvfspoof &= ~(1 << vf_target_shift);
IXGBE_WRITE_REG(hw, IXGBE_PFVFSPOOF(vf_target_reg), pfvfspoof);
}
drivers/net/ixgbe/ixgbe_common.h
View file @ 041110a4
......@@ -88,6 +88,8 @@ s32 ixgbe_get_wwn_prefix_generic(struct ixgbe_hw *hw, u16 *wwnn_prefix,
u16 *wwpn_prefix);
s32 ixgbe_blink_led_start_generic(struct ixgbe_hw *hw, u32 index);
s32 ixgbe_blink_led_stop_generic(struct ixgbe_hw *hw, u32 index);
void ixgbe_set_mac_anti_spoofing(struct ixgbe_hw *hw, bool enable, int pf);
void ixgbe_set_vlan_anti_spoofing(struct ixgbe_hw *hw, bool enable, int vf);
#define IXGBE_WRITE_REG(a, reg, value) writel((value), ((a)->hw_addr + (reg)))
......
drivers/net/ixgbe/ixgbe_main.c
View file @ 041110a4
......@@ -3132,6 +3132,9 @@ static void ixgbe_configure_virtualization(struct ixgbe_adapter *adapter)
/* enable Tx loopback for VF/PF communication */
IXGBE_WRITE_REG(hw, IXGBE_PFDTXGSWC, IXGBE_PFDTXGSWC_VT_LBEN);
/* Enable MAC Anti-Spoofing */
hw->mac.ops.set_mac_anti_spoofing(hw, (adapter->num_vfs != 0),
adapter->num_vfs);
}
static void ixgbe_set_rx_buffer_len(struct ixgbe_adapter *adapter)
......@@ -5960,6 +5963,26 @@ static void ixgbe_fdir_reinit_task(struct work_struct *work)
netif_tx_start_all_queues(adapter->netdev);
}
static void ixgbe_spoof_check(struct ixgbe_adapter *adapter)
{
u32 ssvpc;
/* Do not perform spoof check for 82598 */
if (adapter->hw.mac.type == ixgbe_mac_82598EB)
return;
ssvpc = IXGBE_READ_REG(&adapter->hw, IXGBE_SSVPC);
/*
* ssvpc register is cleared on read, if zero then no
* spoofed packets in the last interval.
*/
if (!ssvpc)
return;
e_warn(drv, "%d Spoofed packets detected\n", ssvpc);
}
static DEFINE_MUTEX(ixgbe_watchdog_lock);
/**
......@@ -6080,6 +6103,7 @@ static void ixgbe_watchdog_task(struct work_struct *work)
}
}
ixgbe_spoof_check(adapter);
ixgbe_update_stats(adapter);
mutex_unlock(&ixgbe_watchdog_lock);
}
......@@ -6889,7 +6913,7 @@ static void __devinit ixgbe_probe_vf(struct ixgbe_adapter *adapter,
struct ixgbe_hw *hw = &adapter->hw;
int err;
if (hw->mac.type != ixgbe_mac_82599EB || !max_vfs)
if (hw->mac.type == ixgbe_mac_82598EB || !max_vfs)
return;
/* The 82599 supports up to 64 VFs per physical function
......
drivers/net/ixgbe/ixgbe_mbx.c
View file @ 041110a4
......@@ -321,9 +321,11 @@ static s32 ixgbe_check_for_rst_pf(struct ixgbe_hw *hw, u16 vf_number)
switch (hw->mac.type) {
case ixgbe_mac_82599EB:
case ixgbe_mac_X540:
vflre = IXGBE_READ_REG(hw, IXGBE_VFLRE(reg_offset));
break;
case ixgbe_mac_X540:
vflre = IXGBE_READ_REG(hw, IXGBE_VFLREC(reg_offset));
break;
default:
break;
}
......
drivers/net/ixgbe/ixgbe_sriov.c
View file @ 041110a4
......@@ -215,6 +215,11 @@ static inline void ixgbe_vf_reset_msg(struct ixgbe_adapter *adapter, u32 vf)
reg |= (reg | (1 << vf_shift));
IXGBE_WRITE_REG(hw, IXGBE_VFRE(reg_offset), reg);
/* Enable counting of spoofed packets in the SSVPC register */
reg = IXGBE_READ_REG(hw, IXGBE_VMECM(reg_offset));
reg |= (1 << vf_shift);
IXGBE_WRITE_REG(hw, IXGBE_VMECM(reg_offset), reg);
ixgbe_vf_reset_event(adapter, vf);
}
......@@ -227,6 +232,7 @@ static int ixgbe_rcv_msg_from_vf(struct ixgbe_adapter *adapter, u32 vf)
int entries;
u16 *hash_list;
int add, vid;
u8 *new_mac;
retval = ixgbe_read_mbx(hw, msgbuf, mbx_size, vf);
......@@ -244,15 +250,22 @@ static int ixgbe_rcv_msg_from_vf(struct ixgbe_adapter *adapter, u32 vf)
if (msgbuf[0] == IXGBE_VF_RESET) {
unsigned char *vf_mac = adapter->vfinfo[vf].vf_mac_addresses;
u8 *addr = (u8 *)(&msgbuf[1]);
new_mac = (u8 *)(&msgbuf[1]);
e_info(probe, "VF Reset msg received from vf %d\n", vf);
adapter->vfinfo[vf].clear_to_send = false;
ixgbe_vf_reset_msg(adapter, vf);
adapter->vfinfo[vf].clear_to_send = true;
if (is_valid_ether_addr(new_mac) &&
!adapter->vfinfo[vf].pf_set_mac)
ixgbe_set_vf_mac(adapter, vf, vf_mac);
else
ixgbe_set_vf_mac(adapter,
vf, adapter->vfinfo[vf].vf_mac_addresses);
/* reply to reset with ack and vf mac address */
msgbuf[0] = IXGBE_VF_RESET | IXGBE_VT_MSGTYPE_ACK;
memcpy(addr, vf_mac, IXGBE_ETH_LENGTH_OF_ADDRESS);
memcpy(new_mac, vf_mac, IXGBE_ETH_LENGTH_OF_ADDRESS);
/*
* Piggyback the multicast filter type so VF can compute the
* correct vectors
......@@ -271,14 +284,16 @@ static int ixgbe_rcv_msg_from_vf(struct ixgbe_adapter *adapter, u32 vf)
switch ((msgbuf[0] & 0xFFFF)) {
case IXGBE_VF_SET_MAC_ADDR:
{
u8 *new_mac = ((u8 *)(&msgbuf[1]));
new_mac = ((u8 *)(&msgbuf[1]));
if (is_valid_ether_addr(new_mac) &&
!adapter->vfinfo[vf].pf_set_mac)
!adapter->vfinfo[vf].pf_set_mac) {
ixgbe_set_vf_mac(adapter, vf, new_mac);
else
ixgbe_set_vf_mac(adapter,
vf, adapter->vfinfo[vf].vf_mac_addresses);
} else if (memcmp(adapter->vfinfo[vf].vf_mac_addresses,
new_mac, ETH_ALEN)) {
e_warn(drv, "VF %d attempted to override "
"administratively set MAC address\nReload "
"the VF driver to resume operations\n", vf);
retval = -1;
}
break;
case IXGBE_VF_SET_MULTICAST:
......@@ -295,7 +310,15 @@ static int ixgbe_rcv_msg_from_vf(struct ixgbe_adapter *adapter, u32 vf)
add = (msgbuf[0] & IXGBE_VT_MSGINFO_MASK)
>> IXGBE_VT_MSGINFO_SHIFT;
vid = (msgbuf[1] & IXGBE_VLVF_VLANID_MASK);
if (adapter->vfinfo[vf].pf_vlan) {
e_warn(drv, "VF %d attempted to override "
"administratively set VLAN configuration\n"
"Reload the VF driver to resume operations\n",
vf);
retval = -1;
} else {
retval = ixgbe_set_vf_vlan(adapter, add, vid, vf);
}
break;
default:
e_err(drv, "Unhandled Msg %8.8x\n", msgbuf[0]);
......@@ -394,6 +417,7 @@ int ixgbe_ndo_set_vf_vlan(struct net_device *netdev, int vf, u16 vlan, u8 qos)
{
int err = 0;
struct ixgbe_adapter *adapter = netdev_priv(netdev);
struct ixgbe_hw *hw = &adapter->hw;
if ((vf >= adapter->num_vfs) || (vlan > 4095) || (qos > 7))
return -EINVAL;
......@@ -402,7 +426,8 @@ int ixgbe_ndo_set_vf_vlan(struct net_device *netdev, int vf, u16 vlan, u8 qos)
if (err)
goto out;
ixgbe_set_vmvir(adapter, vlan | (qos << VLAN_PRIO_SHIFT), vf);
ixgbe_set_vmolr(&adapter->hw, vf, false);
ixgbe_set_vmolr(hw, vf, false);
hw->mac.ops.set_vlan_anti_spoofing(hw, true, vf);
adapter->vfinfo[vf].pf_vlan = vlan;
adapter->vfinfo[vf].pf_qos = qos;
dev_info(&adapter->pdev->dev,
......@@ -419,7 +444,8 @@ int ixgbe_ndo_set_vf_vlan(struct net_device *netdev, int vf, u16 vlan, u8 qos)
err = ixgbe_set_vf_vlan(adapter, false,
adapter->vfinfo[vf].pf_vlan, vf);
ixgbe_set_vmvir(adapter, vlan, vf);
ixgbe_set_vmolr(&adapter->hw, vf, true);
ixgbe_set_vmolr(hw, vf, true);
hw->mac.ops.set_vlan_anti_spoofing(hw, false, vf);
adapter->vfinfo[vf].pf_vlan = 0;
adapter->vfinfo[vf].pf_qos = 0;
}
......
drivers/net/ixgbe/ixgbe_type.h
View file @ 041110a4
......@@ -230,6 +230,7 @@
#define IXGBE_VT_CTL 0x051B0
#define IXGBE_VFRE(_i) (0x051E0 + ((_i) * 4))
#define IXGBE_VFTE(_i) (0x08110 + ((_i) * 4))
#define IXGBE_VMECM(_i) (0x08790 + ((_i) * 4))
#define IXGBE_QDE 0x2F04
#define IXGBE_VMOLR(_i) (0x0F000 + ((_i) * 4)) /* 64 total */
#define IXGBE_UTA(_i) (0x0F400 + ((_i) * 4))
......@@ -285,6 +286,7 @@
#define IXGBE_DTXCTL 0x07E00
#define IXGBE_DMATXCTL 0x04A80
#define IXGBE_PFVFSPOOF(_i) (0x08200 + ((_i) * 4)) /* 8 of these 0 - 7 */
#define IXGBE_PFDTXGSWC 0x08220
#define IXGBE_DTXMXSZRQ 0x08100
#define IXGBE_DTXTCPFLGL 0x04A88
......@@ -298,6 +300,13 @@
#define IXGBE_DMATXCTL_VT_SHIFT 16 /* VLAN EtherType */
#define IXGBE_PFDTXGSWC_VT_LBEN 0x1 /* Local L2 VT switch enable */
/* Anti-spoofing defines */
#define IXGBE_SPOOF_MACAS_MASK 0xFF
#define IXGBE_SPOOF_VLANAS_MASK 0xFF00
#define IXGBE_SPOOF_VLANAS_SHIFT 8
#define IXGBE_PFVFSPOOF_REG_COUNT 8
#define IXGBE_DCA_TXCTRL(_i) (0x07200 + ((_i) * 4)) /* 16 of these (0-15) */
/* Tx DCA Control register : 128 of these (0-127) */
#define IXGBE_DCA_TXCTRL_82599(_i) (0x0600C + ((_i) * 0x40))
......@@ -2482,6 +2491,8 @@ struct ixgbe_mac_operations {
s32 (*clear_vfta)(struct ixgbe_hw *);
s32 (*set_vfta)(struct ixgbe_hw *, u32, u32, bool);
s32 (*init_uta_tables)(struct ixgbe_hw *);
void (*set_mac_anti_spoofing)(struct ixgbe_hw *, bool, int);
void (*set_vlan_anti_spoofing)(struct ixgbe_hw *, bool, int);
/* Flow Control */
s32 (*fc_enable)(struct ixgbe_hw *, s32);
......
drivers/net/ixgbe/ixgbe_x540.c
View file @ 041110a4
......@@ -685,6 +685,8 @@ static struct ixgbe_mac_operations mac_ops_X540 = {
.fc_enable = &ixgbe_fc_enable_generic,
.init_uta_tables = &ixgbe_init_uta_tables_generic,
.setup_sfp = NULL,
.set_mac_anti_spoofing = &ixgbe_set_mac_anti_spoofing,
.set_vlan_anti_spoofing = &ixgbe_set_vlan_anti_spoofing,
};
static struct ixgbe_eeprom_operations eeprom_ops_X540 = {
......
drivers/net/ixgbevf/defines.h
View file @ 041110a4
......@@ -30,6 +30,7 @@
/* Device IDs */
#define IXGBE_DEV_ID_82599_VF 0x10ED
#define IXGBE_DEV_ID_X540_VF 0x1515
#define IXGBE_VF_IRQ_CLEAR_MASK 7
#define IXGBE_VF_MAX_TX_QUEUES 1
......
drivers/net/ixgbevf/ixgbevf.h
View file @ 041110a4
......@@ -275,9 +275,11 @@ enum ixbgevf_state_t {
enum ixgbevf_boards {
board_82599_vf,
board_X540_vf,
};
extern struct ixgbevf_info ixgbevf_vf_info;
extern struct ixgbevf_info ixgbevf_82599_vf_info;
extern struct ixgbevf_info ixgbevf_X540_vf_info;
extern struct ixgbe_mac_operations ixgbevf_mbx_ops;
/* needed by ethtool.c */
......
drivers/net/ixgbevf/ixgbevf_main.c
View file @ 041110a4
......@@ -51,13 +51,14 @@ char ixgbevf_driver_name[] = "ixgbevf";
static const char ixgbevf_driver_string[] =
"Intel(R) 82599 Virtual Function";
#define DRV_VERSION "1.0.12-k0"
#define DRV_VERSION "1.0.19-k0"
const char ixgbevf_driver_version[] = DRV_VERSION;
static char ixgbevf_copyright[] =
"Copyright (c) 2009 - 2010 Intel Corporation.";
static const struct ixgbevf_info *ixgbevf_info_tbl[] = {
[board_82599_vf] = &ixgbevf_vf_info,
[board_82599_vf] = &ixgbevf_82599_vf_info,
[board_X540_vf] = &ixgbevf_X540_vf_info,
};
/* ixgbevf_pci_tbl - PCI Device ID Table
......@@ -71,6 +72,8 @@ static const struct ixgbevf_info *ixgbevf_info_tbl[] = {
static struct pci_device_id ixgbevf_pci_tbl[] = {
{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_VF),
board_82599_vf},
{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_X540_VF),
board_X540_vf},
/* required last entry */
{0, }
......
drivers/net/ixgbevf/vf.c
View file @ 041110a4
......@@ -381,8 +381,12 @@ static struct ixgbe_mac_operations ixgbevf_mac_ops = {
.set_vfta = ixgbevf_set_vfta_vf,
};
struct ixgbevf_info ixgbevf_vf_info = {
struct ixgbevf_info ixgbevf_82599_vf_info = {
.mac = ixgbe_mac_82599_vf,
.mac_ops = &ixgbevf_mac_ops,
};
struct ixgbevf_info ixgbevf_X540_vf_info = {
.mac = ixgbe_mac_X540_vf,
.mac_ops = &ixgbevf_mac_ops,
};
drivers/net/ixgbevf/vf.h
View file @ 041110a4
......@@ -73,6 +73,7 @@ struct ixgbe_mac_operations {
enum ixgbe_mac_type {
ixgbe_mac_unknown = 0,
ixgbe_mac_82599_vf,
ixgbe_mac_X540_vf,
ixgbe_num_macs
};
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7