Commit 05ca5270 authored by Maximilian Schneider's avatar Maximilian Schneider Committed by Marc Kleine-Budde

can: gs_usb: add ethtool set_phys_id callback to locate physical device

This patch Implements the ethtool set_phys_id callback to ease the
locating of specific physical devices. Currently only supported on
candleLight interfaces.
Signed-off-by: default avatarHubert Denkmair <hubert@denkmair.de>
Signed-off-by: default avatarMaximilian Schneider <max@schneidersoft.net>
[mkl: split codingstyle change sinto separate patch]
Signed-off-by: default avatarMarc Kleine-Budde <mkl@pengutronix.de>
parent 9be95c91
......@@ -39,7 +39,9 @@ enum gs_usb_breq {
GS_USB_BREQ_MODE,
GS_USB_BREQ_BERR,
GS_USB_BREQ_BT_CONST,
GS_USB_BREQ_DEVICE_CONFIG
GS_USB_BREQ_DEVICE_CONFIG,
GS_USB_BREQ_TIMESTAMP,
GS_USB_BREQ_IDENTIFY,
};
enum gs_can_mode {
......@@ -58,6 +60,11 @@ enum gs_can_state {
GS_CAN_STATE_SLEEPING
};
enum gs_can_identify_mode {
GS_CAN_IDENTIFY_OFF = 0,
GS_CAN_IDENTIFY_ON
};
/* data types passed between host and device */
struct gs_host_config {
u32 byte_order;
......@@ -101,10 +108,16 @@ struct gs_device_bittiming {
u32 brp;
} __packed;
struct gs_identify_mode {
u32 mode;
} __packed;
#define GS_CAN_FEATURE_LISTEN_ONLY BIT(0)
#define GS_CAN_FEATURE_LOOP_BACK BIT(1)
#define GS_CAN_FEATURE_TRIPLE_SAMPLE BIT(2)
#define GS_CAN_FEATURE_ONE_SHOT BIT(3)
#define GS_CAN_FEATURE_HW_TIMESTAMP BIT(4)
#define GS_CAN_FEATURE_IDENTIFY BIT(5)
struct gs_device_bt_const {
u32 feature;
......@@ -724,7 +737,59 @@ static const struct net_device_ops gs_usb_netdev_ops = {
.ndo_change_mtu = can_change_mtu,
};
static struct gs_can *gs_make_candev(unsigned int channel, struct usb_interface *intf)
static int gs_usb_set_identify(struct net_device *netdev, bool do_identify)
{
struct gs_can *dev = netdev_priv(netdev);
struct gs_identify_mode imode;
int rc;
if (do_identify)
imode.mode = GS_CAN_IDENTIFY_ON;
else
imode.mode = GS_CAN_IDENTIFY_OFF;
rc = usb_control_msg(interface_to_usbdev(dev->iface),
usb_sndctrlpipe(interface_to_usbdev(dev->iface),
0),
GS_USB_BREQ_IDENTIFY,
USB_DIR_OUT | USB_TYPE_VENDOR |
USB_RECIP_INTERFACE,
dev->channel,
0,
&imode,
sizeof(imode),
100);
return (rc > 0) ? 0 : rc;
}
/* blink LED's for finding the this interface */
static int gs_usb_set_phys_id(struct net_device *dev,
enum ethtool_phys_id_state state)
{
int rc = 0;
switch (state) {
case ETHTOOL_ID_ACTIVE:
rc = gs_usb_set_identify(dev, GS_CAN_IDENTIFY_ON);
break;
case ETHTOOL_ID_INACTIVE:
rc = gs_usb_set_identify(dev, GS_CAN_IDENTIFY_OFF);
break;
default:
break;
}
return rc;
}
static const struct ethtool_ops gs_usb_ethtool_ops = {
.set_phys_id = gs_usb_set_phys_id,
};
static struct gs_can *gs_make_candev(unsigned int channel,
struct usb_interface *intf,
struct gs_device_config *dconf)
{
struct gs_can *dev;
struct net_device *netdev;
......@@ -812,10 +877,14 @@ static struct gs_can *gs_make_candev(unsigned int channel, struct usb_interface
if (bt_const->feature & GS_CAN_FEATURE_ONE_SHOT)
dev->can.ctrlmode_supported |= CAN_CTRLMODE_ONE_SHOT;
kfree(bt_const);
SET_NETDEV_DEV(netdev, &intf->dev);
if (dconf->sw_version > 1)
if (bt_const->feature & GS_CAN_FEATURE_IDENTIFY)
netdev->ethtool_ops = &gs_usb_ethtool_ops;
kfree(bt_const);
rc = register_candev(dev->netdev);
if (rc) {
free_candev(dev->netdev);
......@@ -833,19 +902,16 @@ static void gs_destroy_candev(struct gs_can *dev)
free_candev(dev->netdev);
}
static int gs_usb_probe(struct usb_interface *intf, const struct usb_device_id *id)
static int gs_usb_probe(struct usb_interface *intf,
const struct usb_device_id *id)
{
struct gs_usb *dev;
int rc = -ENOMEM;
unsigned int icount, i;
struct gs_host_config *hconf;
struct gs_device_config *dconf;
hconf = kmalloc(sizeof(*hconf), GFP_KERNEL);
if (!hconf)
return -ENOMEM;
hconf->byte_order = 0x0000beef;
struct gs_host_config hconf = {
.byte_order = 0x0000beef,
};
struct gs_device_config dconf;
/* send host config */
rc = usb_control_msg(interface_to_usbdev(intf),
......@@ -854,22 +920,16 @@ static int gs_usb_probe(struct usb_interface *intf, const struct usb_device_id *
USB_DIR_OUT|USB_TYPE_VENDOR|USB_RECIP_INTERFACE,
1,
intf->altsetting[0].desc.bInterfaceNumber,
hconf,
sizeof(*hconf),
&hconf,
sizeof(hconf),
1000);
kfree(hconf);
if (rc < 0) {
dev_err(&intf->dev, "Couldn't send data format (err=%d)\n",
rc);
return rc;
}
dconf = kmalloc(sizeof(*dconf), GFP_KERNEL);
if (!dconf)
return -ENOMEM;
/* read device config */
rc = usb_control_msg(interface_to_usbdev(intf),
usb_rcvctrlpipe(interface_to_usbdev(intf), 0),
......@@ -877,22 +937,16 @@ static int gs_usb_probe(struct usb_interface *intf, const struct usb_device_id *
USB_DIR_IN|USB_TYPE_VENDOR|USB_RECIP_INTERFACE,
1,
intf->altsetting[0].desc.bInterfaceNumber,
dconf,
sizeof(*dconf),
&dconf,
sizeof(dconf),
1000);
if (rc < 0) {
dev_err(&intf->dev, "Couldn't get device config: (err=%d)\n",
rc);
kfree(dconf);
return rc;
}
icount = dconf->icount+1;
kfree(dconf);
icount = dconf.icount + 1;
dev_info(&intf->dev, "Configuring for %d interfaces\n", icount);
if (icount > GS_MAX_INTF) {
......@@ -913,7 +967,7 @@ static int gs_usb_probe(struct usb_interface *intf, const struct usb_device_id *
dev->udev = interface_to_usbdev(intf);
for (i = 0; i < icount; i++) {
dev->canch[i] = gs_make_candev(i, intf);
dev->canch[i] = gs_make_candev(i, intf, &dconf);
if (IS_ERR_OR_NULL(dev->canch[i])) {
/* save error code to return later */
rc = PTR_ERR(dev->canch[i]);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment