lis3: fix regression of HP DriveGuard with 8bit chip

Commit 2a7fade7 ("hwmon: lis3: Power on corrections") caused a
regression on HP laptops with 8bit chip.  Writing CTRL2_BOOT_8B bit seems
clearing the BIOS setup, and no proper interrupt for DriveGuard will be
triggered any more.

Since the init code there is basically only for embedded devices, put a
pdata check so that the problematic initialization will be skipped for
hp_accel stuff.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Cc: Eric Piel <eric.piel@tremplin-utc.net>
Cc: Samu Onkalo <samu.p.onkalo@nokia.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/misc/lis3lv02d/lis3lv02d.c

@@ -375,12 +375,14 @@ void lis3lv02d_poweron(struct lis3lv02d *lis3)
 	 *      both have been read. So the value read will always be correct.
 	 * Set BOOT bit to refresh factory tuning values.
 	 */
+	if (lis3->pdata) {
 		lis3->read(lis3, CTRL_REG2, &reg);
 		if (lis3->whoami ==  WAI_12B)
 			reg |= CTRL2_BDU | CTRL2_BOOT;
 		else
 			reg |= CTRL2_BOOT_8B;
 		lis3->write(lis3, CTRL_REG2, reg);
+	}
 
 	/* LIS3 power on delay is quite long */
 	msleep(lis3->pwron_delay / lis3lv02d_get_odr());