Skip to content

L
linux
Commit 064e297c authored by Linus Torvalds's avatar Linus Torvalds
Browse files
Options

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin 

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin: (30 commits)
  Blackfin: SMP: fix continuation lines
  Blackfin: acvilon: fix timeout usage for I2C
  Blackfin: fix typo in BF537 IRQ comment
  Blackfin: unify duplicate MEM_MT48LC32M8A2_75 kconfig options
  Blackfin: set ARCH_KMALLOC_MINALIGN
  Blackfin: use atomic kmalloc in L1 alloc so it too can be atomic
  Blackfin: another year of changes (update copyright in boot log)
  Blackfin: optimize strncpy a bit
  Blackfin: isram: clean up ITEST_COMMAND macro and improve the selftests
  Blackfin: move string functions to normal lib/ assembly
  Blackfin: SIC: cut down on IAR MMR reads a bit
  Blackfin: bf537-minotaur: fix build errors due to header changes
  Blackfin: kgdb: pass up the CC register instead of a 0 stub
  Blackfin: handle HW errors in the new "FAULT" printing code
  Blackfin: show the whole accumulator in the pseudo DBG insn
  Blackfin: support all possible registers in the pseudo instructions
  Blackfin: add support for the DBG (debug output) pseudo insn
  Blackfin: change the BUG opcode to an unused 16-bit opcode
  Blackfin: allow NMI watchdog to be used w/RETN as a scratch reg
  Blackfin: add support for the DBGA (debug assert) pseudo insn
  ...
parents f1377118 db52ecc2
Hide whitespace changes
Inline Side-by-side
Showing with 1938 additions and 3241 deletions
arch/blackfin/Kconfig
View file @ 064e297c
......@@ -348,7 +348,7 @@ config MEM_MT48LC16M16A2TG_75
config MEM_MT48LC32M8A2_75
bool
depends on (BFIN537_STAMP || PNAV10 || BFIN538_EZKIT)
depends on (BFIN518F_EZBRD || BFIN537_STAMP || PNAV10 || BFIN538_EZKIT)
default y
config MEM_MT48LC8M32B2B5_7
......@@ -361,11 +361,6 @@ config MEM_MT48LC32M16A2TG_75
depends on (BFIN527_EZKIT || BFIN527_EZKIT_V2 || BFIN532_IP0X || BLACKSTAMP)
default y
config MEM_MT48LC32M8A2_75
bool
depends on (BFIN518F_EZBRD)
default y
config MEM_MT48H32M16LFCJ_75
bool
depends on (BFIN526_EZBRD)
......@@ -791,6 +786,34 @@ config MEMCPY_L1
If enabled, the memcpy function is linked
into L1 instruction memory. (less latency)
config STRCMP_L1
bool "locate strcmp function in L1 Memory"
default y
help
If enabled, the strcmp function is linked
into L1 instruction memory (less latency).
config STRNCMP_L1
bool "locate strncmp function in L1 Memory"
default y
help
If enabled, the strncmp function is linked
into L1 instruction memory (less latency).
config STRCPY_L1
bool "locate strcpy function in L1 Memory"
default y
help
If enabled, the strcpy function is linked
into L1 instruction memory (less latency).
config STRNCPY_L1
bool "locate strncpy function in L1 Memory"
default y
help
If enabled, the strncpy function is linked
into L1 instruction memory (less latency).
config SYS_BFIN_SPINLOCK_L1
bool "Locate sys_bfin_spinlock function in L1 Memory"
default y
......@@ -1187,32 +1210,6 @@ config PM_BFIN_SLEEP
If unsure, select "Sleep Deeper".
endchoice
config PM_WAKEUP_BY_GPIO
bool "Allow Wakeup from Standby by GPIO"
depends on PM && !BF54x
config PM_WAKEUP_GPIO_NUMBER
int "GPIO number"
range 0 47
depends on PM_WAKEUP_BY_GPIO
default 2
choice
prompt "GPIO Polarity"
depends on PM_WAKEUP_BY_GPIO
default PM_WAKEUP_GPIO_POLAR_H
config PM_WAKEUP_GPIO_POLAR_H
bool "Active High"
config PM_WAKEUP_GPIO_POLAR_L
bool "Active Low"
config PM_WAKEUP_GPIO_POLAR_EDGE_F
bool "Falling EDGE"
config PM_WAKEUP_GPIO_POLAR_EDGE_R
bool "Rising EDGE"
config PM_WAKEUP_GPIO_POLAR_EDGE_B
bool "Both EDGE"
endchoice
comment "Possible Suspend Mem / Hibernate Wake-Up Sources"
depends on PM
......
arch/blackfin/Kconfig.debug
View file @ 064e297c
......@@ -238,7 +238,7 @@ config EARLY_PRINTK
config NMI_WATCHDOG
bool "Enable NMI watchdog to help debugging lockup on SMP"
default n
depends on (SMP && !BFIN_SCRATCH_REG_RETN)
depends on SMP
help
If any CPU in the system does not execute the period local timer
interrupt for more than 5 seconds, then the NMI handler dumps debug
......@@ -264,4 +264,13 @@ config BFIN_ISRAM_SELF_TEST
help
Run some self tests of the isram driver code at boot.
config BFIN_PSEUDODBG_INSNS
bool "Support pseudo debug instructions"
default n
help
This option allows the kernel to emulate some pseudo instructions which
allow simulator test cases to be run under Linux with no changes.
Most people should say N here.
endmenu
arch/blackfin/include/asm/bfin-global.h
View file @ 064e297c
......@@ -39,9 +39,15 @@ extern unsigned long sclk_to_usecs(unsigned long sclk);
extern unsigned long usecs_to_sclk(unsigned long usecs);
struct pt_regs;
#if defined(CONFIG_DEBUG_VERBOSE)
extern void dump_bfin_process(struct pt_regs *regs);
extern void dump_bfin_mem(struct pt_regs *regs);
extern void dump_bfin_trace_buffer(void);
#else
#define dump_bfin_process(regs)
#define dump_bfin_mem(regs)
#define dump_bfin_trace_buffer()
#endif
/* init functions only */
extern int init_arch_irq(void);
......
arch/blackfin/include/asm/bug.h
View file @ 064e297c
......@@ -9,7 +9,12 @@
#ifdef CONFIG_BUG
#define BFIN_BUG_OPCODE 0xefcd
/*
* This can be any undefined 16-bit opcode, meaning
* ((opcode & 0xc000) != 0xc000)
* Anything from 0x0001 to 0x000A (inclusive) will work
*/
#define BFIN_BUG_OPCODE 0x0001
#ifdef CONFIG_DEBUG_BUGVERBOSE
......
arch/blackfin/include/asm/cache.h
View file @ 064e297c
......@@ -15,6 +15,8 @@
#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT)
#define SMP_CACHE_BYTES L1_CACHE_BYTES
#define ARCH_KMALLOC_MINALIGN L1_CACHE_BYTES
#ifdef CONFIG_SMP
#define __cacheline_aligned
#else
......
arch/blackfin/include/asm/gpio.h
View file @ 064e297c
......@@ -167,23 +167,23 @@ int bfin_special_gpio_request(unsigned gpio, const char *label);
#endif
#ifdef CONFIG_PM
int bfin_pm_standby_ctrl(unsigned ctrl);
unsigned int bfin_pm_standby_setup(void);
void bfin_pm_standby_restore(void);
static inline int bfin_pm_standby_setup(void)
{
return bfin_pm_standby_ctrl(1);
}
static inline void bfin_pm_standby_restore(void)
{
bfin_pm_standby_ctrl(0);
}
void bfin_gpio_pm_hibernate_restore(void);
void bfin_gpio_pm_hibernate_suspend(void);
#ifndef CONFIG_BF54x
#define PM_WAKE_RISING 0x1
#define PM_WAKE_FALLING 0x2
#define PM_WAKE_HIGH 0x4
#define PM_WAKE_LOW 0x8
#define PM_WAKE_BOTH_EDGES (PM_WAKE_RISING | PM_WAKE_FALLING)
#define PM_WAKE_IGNORE 0xF0
int gpio_pm_wakeup_request(unsigned gpio, unsigned char type);
void gpio_pm_wakeup_free(unsigned gpio);
int gpio_pm_wakeup_ctrl(unsigned gpio, unsigned ctrl);
struct gpio_port_s {
unsigned short data;
......
arch/blackfin/include/asm/pgtable.h
View file @ 064e297c
......@@ -80,7 +80,8 @@ PTE_BIT_FUNC(mkyoung, |= _PAGE_ACCESSED);
* ZERO_PAGE is a global shared page that is always zero: used
* for zero-mapped memory areas etc..
*/
#define ZERO_PAGE(vaddr) (virt_to_page(0))
#define ZERO_PAGE(vaddr) virt_to_page(empty_zero_page)
extern char empty_zero_page[];
extern unsigned int kobjsize(const void *objp);
......
arch/blackfin/include/asm/pseudo_instructions.h 0 → 100644
View file @ 064e297c
/*
* header file for pseudo instructions
*
* Copyright 2010 Analog Devices Inc.
*
* Licensed under the GPL-2 or later.
*/
#ifndef _BLACKFIN_PSEUDO_
#define _BLACKFIN_PSEUDO_
#include <linux/types.h>
#include <asm/ptrace.h>
extern bool execute_pseudodbg_assert(struct pt_regs *fp, unsigned int opcode);
extern bool execute_pseudodbg(struct pt_regs *fp, unsigned int opcode);
#endif
arch/blackfin/include/asm/string.h
View file @ 064e297c
......@@ -12,121 +12,16 @@
#ifdef __KERNEL__ /* only set these up for kernel code */
#define __HAVE_ARCH_STRCPY
extern inline char *strcpy(char *dest, const char *src)
{
char *xdest = dest;
char temp = 0;
__asm__ __volatile__ (
"1:"
"%2 = B [%1++] (Z);"
"B [%0++] = %2;"
"CC = %2;"
"if cc jump 1b (bp);"
: "+&a" (dest), "+&a" (src), "=&d" (temp)
:
: "memory", "CC");
return xdest;
}
extern char *strcpy(char *dest, const char *src);
#define __HAVE_ARCH_STRNCPY
extern inline char *strncpy(char *dest, const char *src, size_t n)
{
char *xdest = dest;
char temp = 0;
if (n == 0)
return xdest;
__asm__ __volatile__ (
"1:"
"%3 = B [%1++] (Z);"
"B [%0++] = %3;"
"CC = %3;"
"if ! cc jump 2f;"
"%2 += -1;"
"CC = %2 == 0;"
"if ! cc jump 1b (bp);"
"jump 4f;"
"2:"
/* if src is shorter than n, we need to null pad bytes now */
"%3 = 0;"
"3:"
"%2 += -1;"
"CC = %2 == 0;"
"if cc jump 4f;"
"B [%0++] = %3;"
"jump 3b;"
"4:"
: "+&a" (dest), "+&a" (src), "+&da" (n), "=&d" (temp)
:
: "memory", "CC");
return xdest;
}
extern char *strncpy(char *dest, const char *src, size_t n);
#define __HAVE_ARCH_STRCMP
extern inline int strcmp(const char *cs, const char *ct)
{
/* need to use int's here so the char's in the assembly don't get
* sign extended incorrectly when we don't want them to be
*/
int __res1, __res2;
__asm__ __volatile__ (
"1:"
"%2 = B[%0++] (Z);" /* get *cs */
"%3 = B[%1++] (Z);" /* get *ct */
"CC = %2 == %3;" /* compare a byte */
"if ! cc jump 2f;" /* not equal, break out */
"CC = %2;" /* at end of cs? */
"if cc jump 1b (bp);" /* no, keep going */
"jump.s 3f;" /* strings are equal */
"2:"
"%2 = %2 - %3;" /* *cs - *ct */
"3:"
: "+&a" (cs), "+&a" (ct), "=&d" (__res1), "=&d" (__res2)
:
: "memory", "CC");
return __res1;
}
extern int strcmp(const char *cs, const char *ct);
#define __HAVE_ARCH_STRNCMP
extern inline int strncmp(const char *cs, const char *ct, size_t count)
{
/* need to use int's here so the char's in the assembly don't get
* sign extended incorrectly when we don't want them to be
*/
int __res1, __res2;
if (!count)
return 0;
__asm__ __volatile__ (
"1:"
"%3 = B[%0++] (Z);" /* get *cs */
"%4 = B[%1++] (Z);" /* get *ct */
"CC = %3 == %4;" /* compare a byte */
"if ! cc jump 3f;" /* not equal, break out */
"CC = %3;" /* at end of cs? */
"if ! cc jump 4f;" /* yes, all done */
"%2 += -1;" /* no, adjust count */
"CC = %2 == 0;"
"if ! cc jump 1b;" /* more to do, keep going */
"2:"
"%3 = 0;" /* strings are equal */
"jump.s 4f;"
"3:"
"%3 = %3 - %4;" /* *cs - *ct */
"4:"
: "+&a" (cs), "+&a" (ct), "+&da" (count), "=&d" (__res1), "=&d" (__res2)
:
: "memory", "CC");
return __res1;
}
extern int strncmp(const char *cs, const char *ct, size_t count);
#define __HAVE_ARCH_MEMSET
extern void *memset(void *s, int c, size_t count);
......
arch/blackfin/include/asm/tlbflush.h
View file @ 064e297c
#include <asm-generic/tlbflush.h>
#define flush_tlb_kernel_range(s, e) do { } while (0)
arch/blackfin/include/asm/trace.h
View file @ 064e297c
......@@ -23,6 +23,13 @@
#ifndef __ASSEMBLY__
extern unsigned long trace_buff_offset;
extern unsigned long software_trace_buff[];
#if defined(CONFIG_DEBUG_VERBOSE)
extern void decode_address(char *buf, unsigned long address);
extern bool get_instruction(unsigned int *val, unsigned short *address);
#else
static inline void decode_address(char *buf, unsigned long address) { }
static inline bool get_instruction(unsigned int *val, unsigned short *address) { return false; }
#endif
/* Trace Macros for C files */
......
arch/blackfin/kernel/Makefile
View file @ 064e297c
......@@ -7,7 +7,8 @@ extra-y := init_task.o vmlinux.lds
obj-y := \
entry.o process.o bfin_ksyms.o ptrace.o setup.o signal.o \
sys_bfin.o traps.o irqchip.o dma-mapping.o flat.o \
fixed_code.o reboot.o bfin_gpio.o bfin_dma_5xx.o
fixed_code.o reboot.o bfin_gpio.o bfin_dma_5xx.o \
exception.o dumpstack.o
ifeq ($(CONFIG_GENERIC_CLOCKEVENTS),y)
obj-y += time-ts.o
......@@ -29,6 +30,8 @@ obj-$(CONFIG_NMI_WATCHDOG) += nmi.o
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
obj-$(CONFIG_EARLY_PRINTK) += shadow_console.o
obj-$(CONFIG_STACKTRACE) += stacktrace.o
obj-$(CONFIG_DEBUG_VERBOSE) += trace.o
obj-$(CONFIG_BFIN_PSEUDODBG_INSNS) += pseudodbg.o
# the kgdb test puts code into L2 and without linker
# relaxation, we need to force long calls to/from it
......
arch/blackfin/kernel/bfin_gpio.c
View file @ 064e297c
......@@ -475,9 +475,7 @@ GET_GPIO_P(maskb)
#ifdef CONFIG_PM
static unsigned short wakeup_map[GPIO_BANK_NUM];
static unsigned char wakeup_flags_map[MAX_BLACKFIN_GPIOS];
static const unsigned int sic_iwr_irqs[] = {
#if defined(BF533_FAMILY)
......@@ -514,112 +512,26 @@ static const unsigned int sic_iwr_irqs[] = {
*************************************************************
* MODIFICATION HISTORY :
**************************************************************/
int gpio_pm_wakeup_request(unsigned gpio, unsigned char type)
{
unsigned long flags;
if ((check_gpio(gpio) < 0) || !type)
return -EINVAL;
local_irq_save_hw(flags);
wakeup_map[gpio_bank(gpio)] |= gpio_bit(gpio);
wakeup_flags_map[gpio] = type;
local_irq_restore_hw(flags);
return 0;
}
EXPORT_SYMBOL(gpio_pm_wakeup_request);
void gpio_pm_wakeup_free(unsigned gpio)
int gpio_pm_wakeup_ctrl(unsigned gpio, unsigned ctrl)
{
unsigned long flags;
if (check_gpio(gpio) < 0)
return;
return -EINVAL;
local_irq_save_hw(flags);
wakeup_map[gpio_bank(gpio)] &= ~gpio_bit(gpio);
local_irq_restore_hw(flags);
}
EXPORT_SYMBOL(gpio_pm_wakeup_free);
static int bfin_gpio_wakeup_type(unsigned gpio, unsigned char type)
{
port_setup(gpio, GPIO_USAGE);
set_gpio_dir(gpio, 0);
set_gpio_inen(gpio, 1);
if (type & (PM_WAKE_RISING | PM_WAKE_FALLING))
set_gpio_edge(gpio, 1);
else
set_gpio_edge(gpio, 0);
if ((type & (PM_WAKE_BOTH_EDGES)) == (PM_WAKE_BOTH_EDGES))
set_gpio_both(gpio, 1);
if (ctrl)
wakeup_map[gpio_bank(gpio)] |= gpio_bit(gpio);
else
set_gpio_both(gpio, 0);
if ((type & (PM_WAKE_FALLING | PM_WAKE_LOW)))
set_gpio_polar(gpio, 1);
else
set_gpio_polar(gpio, 0);
wakeup_map[gpio_bank(gpio)] &= ~gpio_bit(gpio);
SSYNC();
return 0;
}
u32 bfin_pm_standby_setup(void)
{
u16 bank, mask, i, gpio;
for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE) {
mask = wakeup_map[gpio_bank(i)];
bank = gpio_bank(i);
gpio_bank_saved[bank].maskb = gpio_array[bank]->maskb;
gpio_array[bank]->maskb = 0;
if (mask) {
#if defined(CONFIG_BF52x) || defined(BF537_FAMILY) || defined(CONFIG_BF51x)
gpio_bank_saved[bank].fer = *port_fer[bank];
#endif
gpio_bank_saved[bank].inen = gpio_array[bank]->inen;
gpio_bank_saved[bank].polar = gpio_array[bank]->polar;
gpio_bank_saved[bank].dir = gpio_array[bank]->dir;
gpio_bank_saved[bank].edge = gpio_array[bank]->edge;
gpio_bank_saved[bank].both = gpio_array[bank]->both;
gpio_bank_saved[bank].reserved =
reserved_gpio_map[bank];
gpio = i;
while (mask) {
if ((mask & 1) && (wakeup_flags_map[gpio] !=
PM_WAKE_IGNORE)) {
reserved_gpio_map[gpio_bank(gpio)] |=
gpio_bit(gpio);
bfin_gpio_wakeup_type(gpio,
wakeup_flags_map[gpio]);
set_gpio_data(gpio, 0); /*Clear*/
}
gpio++;
mask >>= 1;
}
bfin_internal_set_wake(sic_iwr_irqs[bank], 1);
gpio_array[bank]->maskb_set = wakeup_map[gpio_bank(i)];
}
}
AWA_DUMMY_READ(maskb_set);
set_gpio_maskb(gpio, ctrl);
local_irq_restore_hw(flags);
return 0;
}
void bfin_pm_standby_restore(void)
int bfin_pm_standby_ctrl(unsigned ctrl)
{
u16 bank, mask, i;
......@@ -627,24 +539,10 @@ void bfin_pm_standby_restore(void)
mask = wakeup_map[gpio_bank(i)];
bank = gpio_bank(i);
if (mask) {
#if defined(CONFIG_BF52x) || defined(BF537_FAMILY) || defined(CONFIG_BF51x)
*port_fer[bank] = gpio_bank_saved[bank].fer;
#endif
gpio_array[bank]->inen = gpio_bank_saved[bank].inen;
gpio_array[bank]->dir = gpio_bank_saved[bank].dir;
gpio_array[bank]->polar = gpio_bank_saved[bank].polar;
gpio_array[bank]->edge = gpio_bank_saved[bank].edge;
gpio_array[bank]->both = gpio_bank_saved[bank].both;
reserved_gpio_map[bank] =
gpio_bank_saved[bank].reserved;
bfin_internal_set_wake(sic_iwr_irqs[bank], 0);
}
gpio_array[bank]->maskb = gpio_bank_saved[bank].maskb;
if (mask)
bfin_internal_set_wake(sic_iwr_irqs[bank], ctrl);
}
AWA_DUMMY_READ(maskb);
return 0;
}
void bfin_gpio_pm_hibernate_suspend(void)
......@@ -708,16 +606,11 @@ void bfin_gpio_pm_hibernate_restore(void)
#else /* CONFIG_BF54x */
#ifdef CONFIG_PM
u32 bfin_pm_standby_setup(void)
int bfin_pm_standby_ctrl(unsigned ctrl)
{
return 0;
}
void bfin_pm_standby_restore(void)
{
}
void bfin_gpio_pm_hibernate_suspend(void)
{
int i, bank;
......
arch/blackfin/kernel/bfin_ksyms.c
View file @ 064e297c
......@@ -32,6 +32,18 @@ EXPORT_SYMBOL(memcmp);
EXPORT_SYMBOL(memmove);
EXPORT_SYMBOL(memchr);
/*
* Because string functions are both inline and exported functions and
* folder arch/blackfin/lib is configured as a library path in Makefile,
* symbols exported in folder lib is not linked into built-in.o but
* inlined only. In order to export string symbols to kernel module
* properly, they should be exported here.
*/
EXPORT_SYMBOL(strcpy);
EXPORT_SYMBOL(strncpy);
EXPORT_SYMBOL(strcmp);
EXPORT_SYMBOL(strncmp);
/*
* libgcc functions - functions that are used internally by the
* compiler... (prototypes are not correct though, but that
......
arch/blackfin/kernel/dumpstack.c 0 → 100644
View file @ 064e297c
/* Provide basic stack dumping functions
*
* Copyright 2004-2009 Analog Devices Inc.
*
* Licensed under the GPL-2 or later
*/
#include <linux/kernel.h>
#include <linux/thread_info.h>
#include <linux/mm.h>
#include <linux/uaccess.h>
#include <linux/module.h>
#include <asm/trace.h>
/*
* Checks to see if the address pointed to is either a
* 16-bit CALL instruction, or a 32-bit CALL instruction
*/
static bool is_bfin_call(unsigned short *addr)
{
unsigned int opcode;
if (!get_instruction(&opcode, addr))
return false;
if ((opcode >= 0x0060 && opcode <= 0x0067) ||
(opcode >= 0x0070 && opcode <= 0x0077) ||
(opcode >= 0xE3000000 && opcode <= 0xE3FFFFFF))
return true;
return false;
}
void show_stack(struct task_struct *task, unsigned long *stack)
{
#ifdef CONFIG_PRINTK
unsigned int *addr, *endstack, *fp = 0, *frame;
unsigned short *ins_addr;
char buf[150];
unsigned int i, j, ret_addr, frame_no = 0;
/*
* If we have been passed a specific stack, use that one otherwise
* if we have been passed a task structure, use that, otherwise
* use the stack of where the variable "stack" exists
*/
if (stack == NULL) {
if (task) {
/* We know this is a kernel stack, so this is the start/end */
stack = (unsigned long *)task->thread.ksp;
endstack = (unsigned int *)(((unsigned int)(stack) & ~(THREAD_SIZE - 1)) + THREAD_SIZE);
} else {
/* print out the existing stack info */
stack = (unsigned long *)&stack;
endstack = (unsigned int *)PAGE_ALIGN((unsigned int)stack);
}
} else
endstack = (unsigned int *)PAGE_ALIGN((unsigned int)stack);
printk(KERN_NOTICE "Stack info:\n");
decode_address(buf, (unsigned int)stack);
printk(KERN_NOTICE " SP: [0x%p] %s\n", stack, buf);
if (!access_ok(VERIFY_READ, stack, (unsigned int)endstack - (unsigned int)stack)) {
printk(KERN_NOTICE "Invalid stack pointer\n");
return;
}
/* First thing is to look for a frame pointer */
for (addr = (unsigned int *)((unsigned int)stack & ~0xF); addr < endstack; addr++) {
if (*addr & 0x1)
continue;
ins_addr = (unsigned short *)*addr;
ins_addr--;
if (is_bfin_call(ins_addr))
fp = addr - 1;
if (fp) {
/* Let's check to see if it is a frame pointer */
while (fp >= (addr - 1) && fp < endstack
&& fp && ((unsigned int) fp & 0x3) == 0)
fp = (unsigned int *)*fp;
if (fp == 0 || fp == endstack) {
fp = addr - 1;
break;
}
fp = 0;
}
}
if (fp) {
frame = fp;
printk(KERN_NOTICE " FP: (0x%p)\n", fp);
} else
frame = 0;
/*
* Now that we think we know where things are, we
* walk the stack again, this time printing things out
* incase there is no frame pointer, we still look for
* valid return addresses
*/
/* First time print out data, next time, print out symbols */
for (j = 0; j <= 1; j++) {
if (j)
printk(KERN_NOTICE "Return addresses in stack:\n");
else
printk(KERN_NOTICE " Memory from 0x%08lx to %p", ((long unsigned int)stack & ~0xF), endstack);
fp = frame;
frame_no = 0;
for (addr = (unsigned int *)((unsigned int)stack & ~0xF), i = 0;
addr < endstack; addr++, i++) {
ret_addr = 0;
if (!j && i % 8 == 0)
printk(KERN_NOTICE "%p:", addr);
/* if it is an odd address, or zero, just skip it */
if (*addr & 0x1 || !*addr)
goto print;
ins_addr = (unsigned short *)*addr;
/* Go back one instruction, and see if it is a CALL */
ins_addr--;
ret_addr = is_bfin_call(ins_addr);
print:
if (!j && stack == (unsigned long *)addr)
printk("[%08x]", *addr);
else if (ret_addr)
if (j) {
decode_address(buf, (unsigned int)*addr);
if (frame == addr) {
printk(KERN_NOTICE " frame %2i : %s\n", frame_no, buf);
continue;
}
printk(KERN_NOTICE " address : %s\n", buf);
} else
printk("<%08x>", *addr);
else if (fp == addr) {
if (j)
frame = addr+1;
else
printk("(%08x)", *addr);
fp = (unsigned int *)*addr;
frame_no++;
} else if (!j)
printk(" %08x ", *addr);
}
if (!j)
printk("\n");
}
#endif
}
EXPORT_SYMBOL(show_stack);
void dump_stack(void)
{
unsigned long stack;
#ifdef CONFIG_DEBUG_BFIN_HWTRACE_ON
int tflags;
#endif
trace_buffer_save(tflags);
dump_bfin_trace_buffer();
show_stack(current, &stack);
trace_buffer_restore(tflags);
}
EXPORT_SYMBOL(dump_stack);
arch/blackfin/kernel/exception.c 0 → 100644
View file @ 064e297c
/* Basic functions for adding/removing custom exception handlers
*
* Copyright 2004-2009 Analog Devices Inc.
*
* Licensed under the GPL-2 or later
*/
#include <linux/module.h>
#include <asm/irq_handler.h>
int bfin_request_exception(unsigned int exception, void (*handler)(void))
{
void (*curr_handler)(void);
if (exception > 0x3F)
return -EINVAL;
curr_handler = ex_table[exception];
if (curr_handler != ex_replaceable)
return -EBUSY;
ex_table[exception] = handler;
return 0;
}
EXPORT_SYMBOL(bfin_request_exception);
int bfin_free_exception(unsigned int exception, void (*handler)(void))
{
void (*curr_handler)(void);
if (exception > 0x3F)
return -EINVAL;
curr_handler = ex_table[exception];
if (curr_handler != handler)
return -EBUSY;
ex_table[exception] = ex_replaceable;
return 0;
}
EXPORT_SYMBOL(bfin_free_exception);
arch/blackfin/kernel/kgdb.c
View file @ 064e297c
......@@ -66,7 +66,7 @@ void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs)
gdb_regs[BFIN_RETN] = regs->retn;
gdb_regs[BFIN_RETE] = regs->rete;
gdb_regs[BFIN_PC] = regs->pc;
gdb_regs[BFIN_CC] = 0;
gdb_regs[BFIN_CC] = (regs->astat >> 5) & 1;
gdb_regs[BFIN_EXTRA1] = 0;
gdb_regs[BFIN_EXTRA2] = 0;
gdb_regs[BFIN_EXTRA3] = 0;
......
arch/blackfin/kernel/pseudodbg.c 0 → 100644
View file @ 064e297c
/* The fake debug assert instructions
*
* Copyright 2010 Analog Devices Inc.
*
* Licensed under the GPL-2 or later
*/
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/ptrace.h>
const char * const greg_names[] = {
"R0", "R1", "R2", "R3", "R4", "R5", "R6", "R7",
"P0", "P1", "P2", "P3", "P4", "P5", "SP", "FP",
"I0", "I1", "I2", "I3", "M0", "M1", "M2", "M3",
"B0", "B1", "B2", "B3", "L0", "L1", "L2", "L3",
"A0.X", "A0.W", "A1.X", "A1.W", "<res>", "<res>", "ASTAT", "RETS",
"<res>", "<res>", "<res>", "<res>", "<res>", "<res>", "<res>", "<res>",
"LC0", "LT0", "LB0", "LC1", "LT1", "LB1", "CYCLES", "CYCLES2",
"USP", "SEQSTAT", "SYSCFG", "RETI", "RETX", "RETN", "RETE", "EMUDAT",
};
static const char *get_allreg_name(int grp, int reg)
{
return greg_names[(grp << 3) | reg];
}
/*
* Unfortunately, the pt_regs structure is not laid out the same way as the
* hardware register file, so we need to do some fix ups.
*
* CYCLES is not stored in the pt_regs structure - so, we just read it from
* the hardware.
*
* Don't support:
* - All reserved registers
* - All in group 7 are (supervisors only)
*/
static bool fix_up_reg(struct pt_regs *fp, long *value, int grp, int reg)
{
long *val = &fp->r0;
unsigned long tmp;
/* Only do Dregs and Pregs for now */
if (grp == 5 ||
(grp == 4 && (reg == 4 || reg == 5)) ||
(grp == 7))
return false;
if (grp == 0 || (grp == 1 && reg < 6))
val -= (reg + 8 * grp);
else if (grp == 1 && reg == 6)
val = &fp->usp;
else if (grp == 1 && reg == 7)
val = &fp->fp;
else if (grp == 2) {
val = &fp->i0;
val -= reg;
} else if (grp == 3 && reg >= 4) {
val = &fp->l0;
val -= (reg - 4);
} else if (grp == 3 && reg < 4) {
val = &fp->b0;
val -= reg;
} else if (grp == 4 && reg < 4) {
val = &fp->a0x;
val -= reg;
} else if (grp == 4 && reg == 6)
val = &fp->astat;
else if (grp == 4 && reg == 7)
val = &fp->rets;
else if (grp == 6 && reg < 6) {
val = &fp->lc0;
val -= reg;
} else if (grp == 6 && reg == 6) {
__asm__ __volatile__("%0 = cycles;\n" : "=d"(tmp));
val = &tmp;
} else if (grp == 6 && reg == 7) {
__asm__ __volatile__("%0 = cycles2;\n" : "=d"(tmp));
val = &tmp;
}
*value = *val;
return true;
}
#define PseudoDbg_Assert_opcode 0xf0000000
#define PseudoDbg_Assert_expected_bits 0
#define PseudoDbg_Assert_expected_mask 0xffff
#define PseudoDbg_Assert_regtest_bits 16
#define PseudoDbg_Assert_regtest_mask 0x7
#define PseudoDbg_Assert_grp_bits 19
#define PseudoDbg_Assert_grp_mask 0x7
#define PseudoDbg_Assert_dbgop_bits 22
#define PseudoDbg_Assert_dbgop_mask 0x3
#define PseudoDbg_Assert_dontcare_bits 24
#define PseudoDbg_Assert_dontcare_mask 0x7
#define PseudoDbg_Assert_code_bits 27
#define PseudoDbg_Assert_code_mask 0x1f
/*
* DBGA - debug assert
*/
bool execute_pseudodbg_assert(struct pt_regs *fp, unsigned int opcode)
{
int expected = ((opcode >> PseudoDbg_Assert_expected_bits) & PseudoDbg_Assert_expected_mask);
int dbgop = ((opcode >> (PseudoDbg_Assert_dbgop_bits)) & PseudoDbg_Assert_dbgop_mask);
int grp = ((opcode >> (PseudoDbg_Assert_grp_bits)) & PseudoDbg_Assert_grp_mask);
int regtest = ((opcode >> (PseudoDbg_Assert_regtest_bits)) & PseudoDbg_Assert_regtest_mask);
long value;
if ((opcode & 0xFF000000) != PseudoDbg_Assert_opcode)
return false;
if (!fix_up_reg(fp, &value, grp, regtest))
return false;
if (dbgop == 0 || dbgop == 2) {
/* DBGA ( regs_lo , uimm16 ) */
/* DBGAL ( regs , uimm16 ) */
if (expected != (value & 0xFFFF)) {
pr_notice("DBGA (%s.L,0x%x) failure, got 0x%x\n",
get_allreg_name(grp, regtest),
expected, (unsigned int)(value & 0xFFFF));
return false;
}
} else if (dbgop == 1 || dbgop == 3) {
/* DBGA ( regs_hi , uimm16 ) */
/* DBGAH ( regs , uimm16 ) */
if (expected != ((value >> 16) & 0xFFFF)) {
pr_notice("DBGA (%s.H,0x%x) failure, got 0x%x\n",
get_allreg_name(grp, regtest),
expected, (unsigned int)((value >> 16) & 0xFFFF));
return false;
}
}
fp->pc += 4;
return true;
}
#define PseudoDbg_opcode 0xf8000000
#define PseudoDbg_reg_bits 0
#define PseudoDbg_reg_mask 0x7
#define PseudoDbg_grp_bits 3
#define PseudoDbg_grp_mask 0x7
#define PseudoDbg_fn_bits 6
#define PseudoDbg_fn_mask 0x3
#define PseudoDbg_code_bits 8
#define PseudoDbg_code_mask 0xff
/*
* DBG - debug (dump a register value out)
*/
bool execute_pseudodbg(struct pt_regs *fp, unsigned int opcode)
{
int grp, fn, reg;
long value, value1;
if ((opcode & 0xFF000000) != PseudoDbg_opcode)
return false;
opcode >>= 16;
grp = ((opcode >> PseudoDbg_grp_bits) & PseudoDbg_reg_mask);
fn = ((opcode >> PseudoDbg_fn_bits) & PseudoDbg_fn_mask);
reg = ((opcode >> PseudoDbg_reg_bits) & PseudoDbg_reg_mask);
if (fn == 3 && (reg == 0 || reg == 1)) {
if (!fix_up_reg(fp, &value, 4, 2 * reg))
return false;
if (!fix_up_reg(fp, &value1, 4, 2 * reg + 1))
return false;
pr_notice("DBG A%i = %02lx%08lx\n", reg, value & 0xFF, value1);
fp->pc += 2;
return true;
} else if (fn == 0) {
if (!fix_up_reg(fp, &value, grp, reg))
return false;
pr_notice("DBG %s = %08lx\n", get_allreg_name(grp, reg), value);
fp->pc += 2;
return true;
}
return false;
}
arch/blackfin/kernel/setup.c
View file @ 064e297c
/*
* Copyright 2004-2009 Analog Devices Inc.
* Copyright 2004-2010 Analog Devices Inc.
*
* Licensed under the GPL-2 or later.
*/
......@@ -925,7 +925,7 @@ void __init setup_arch(char **cmdline_p)
else if (_bfin_swrst & RESET_SOFTWARE)
printk(KERN_NOTICE "Reset caused by Software reset\n");
printk(KERN_INFO "Blackfin support (C) 2004-2009 Analog Devices, Inc.\n");
printk(KERN_INFO "Blackfin support (C) 2004-2010 Analog Devices, Inc.\n");
if (bfin_compiled_revid() == 0xffff)
printk(KERN_INFO "Compiled for ADSP-%s Rev any, running on 0.%d\n", CPU, bfin_revid());
else if (bfin_compiled_revid() == -1)
......
arch/blackfin/kernel/sys_bfin.c
View file @ 064e297c
......@@ -47,3 +47,26 @@ unsigned long get_fb_unmapped_area(struct file *filp, unsigned long orig_addr,
}
EXPORT_SYMBOL(get_fb_unmapped_area);
#endif
/* Needed for legacy userspace atomic emulation */
static DEFINE_SPINLOCK(bfin_spinlock_lock);
#ifdef CONFIG_SYS_BFIN_SPINLOCK_L1
__attribute__((l1_text))
#endif
asmlinkage int sys_bfin_spinlock(int *p)
{
int ret, tmp = 0;
spin_lock(&bfin_spinlock_lock); /* This would also hold kernel preemption. */
ret = get_user(tmp, p);
if (likely(ret == 0)) {
if (unlikely(tmp))
ret = 1;
else
put_user(1, p);
}
spin_unlock(&bfin_spinlock_lock);
return ret;
}
arch/blackfin/kernel/trace.c 0 → 100644
View file @ 064e297c
/* provide some functions which dump the trace buffer, in a nice way for people
* to read it, and understand what is going on
*
* Copyright 2004-2010 Analog Devices Inc.
*
* Licensed under the GPL-2 or later
*/
#include <linux/kernel.h>
#include <linux/hardirq.h>
#include <linux/thread_info.h>
#include <linux/mm.h>
#include <linux/uaccess.h>
#include <linux/module.h>
#include <linux/kallsyms.h>
#include <linux/err.h>
#include <linux/fs.h>
#include <asm/dma.h>
#include <asm/trace.h>
#include <asm/fixed_code.h>
#include <asm/traps.h>
#include <asm/irq_handler.h>
void decode_address(char *buf, unsigned long address)
{
struct task_struct *p;
struct mm_struct *mm;
unsigned long flags, offset;
unsigned char in_atomic = (bfin_read_IPEND() & 0x10) || in_atomic();
struct rb_node *n;
#ifdef CONFIG_KALLSYMS
unsigned long symsize;
const char *symname;
char *modname;
char *delim = ":";
char namebuf[128];
#endif
buf += sprintf(buf, "<0x%08lx> ", address);
#ifdef CONFIG_KALLSYMS
/* look up the address and see if we are in kernel space */
symname = kallsyms_lookup(address, &symsize, &offset, &modname, namebuf);
if (symname) {
/* yeah! kernel space! */
if (!modname)
modname = delim = "";
sprintf(buf, "{ %s%s%s%s + 0x%lx }",
delim, modname, delim, symname,
(unsigned long)offset);
return;
}
#endif
if (address >= FIXED_CODE_START && address < FIXED_CODE_END) {
/* Problem in fixed code section? */
strcat(buf, "/* Maybe fixed code section */");
return;
} else if (address < CONFIG_BOOT_LOAD) {
/* Problem somewhere before the kernel start address */
strcat(buf, "/* Maybe null pointer? */");
return;
} else if (address >= COREMMR_BASE) {
strcat(buf, "/* core mmrs */");
return;
} else if (address >= SYSMMR_BASE) {
strcat(buf, "/* system mmrs */");
return;
} else if (address >= L1_ROM_START && address < L1_ROM_START + L1_ROM_LENGTH) {
strcat(buf, "/* on-chip L1 ROM */");
return;
} else if (address >= L1_SCRATCH_START && address < L1_SCRATCH_START + L1_SCRATCH_LENGTH) {
strcat(buf, "/* on-chip scratchpad */");
return;
} else if (address >= physical_mem_end && address < ASYNC_BANK0_BASE) {
strcat(buf, "/* unconnected memory */");
return;
} else if (address >= ASYNC_BANK3_BASE + ASYNC_BANK3_SIZE && address < BOOT_ROM_START) {
strcat(buf, "/* reserved memory */");
return;
} else if (address >= L1_DATA_A_START && address < L1_DATA_A_START + L1_DATA_A_LENGTH) {
strcat(buf, "/* on-chip Data Bank A */");
return;
} else if (address >= L1_DATA_B_START && address < L1_DATA_B_START + L1_DATA_B_LENGTH) {
strcat(buf, "/* on-chip Data Bank B */");
return;
}
/*
* Don't walk any of the vmas if we are oopsing, it has been known
* to cause problems - corrupt vmas (kernel crashes) cause double faults
*/
if (oops_in_progress) {
strcat(buf, "/* kernel dynamic memory (maybe user-space) */");
return;
}
/* looks like we're off in user-land, so let's walk all the
* mappings of all our processes and see if we can't be a whee
* bit more specific
*/
write_lock_irqsave(&tasklist_lock, flags);
for_each_process(p) {
mm = (in_atomic ? p->mm : get_task_mm(p));
if (!mm)
continue;
if (!down_read_trylock(&mm->mmap_sem)) {
if (!in_atomic)
mmput(mm);
continue;
}
for (n = rb_first(&mm->mm_rb); n; n = rb_next(n)) {
struct vm_area_struct *vma;
vma = rb_entry(n, struct vm_area_struct, vm_rb);
if (address >= vma->vm_start && address < vma->vm_end) {
char _tmpbuf[256];
char *name = p->comm;
struct file *file = vma->vm_file;
if (file) {
char *d_name = d_path(&file->f_path, _tmpbuf,
sizeof(_tmpbuf));
if (!IS_ERR(d_name))
name = d_name;
}
/* FLAT does not have its text aligned to the start of
* the map while FDPIC ELF does ...
*/
/* before we can check flat/fdpic, we need to
* make sure current is valid
*/
if ((unsigned long)current >= FIXED_CODE_START &&
!((unsigned long)current & 0x3)) {
if (current->mm &&
(address > current->mm->start_code) &&
(address < current->mm->end_code))
offset = address - current->mm->start_code;
else
offset = (address - vma->vm_start) +
(vma->vm_pgoff << PAGE_SHIFT);
sprintf(buf, "[ %s + 0x%lx ]", name, offset);
} else
sprintf(buf, "[ %s vma:0x%lx-0x%lx]",
name, vma->vm_start, vma->vm_end);
up_read(&mm->mmap_sem);
if (!in_atomic)
mmput(mm);
if (buf[0] == '\0')
sprintf(buf, "[ %s ] dynamic memory", name);
goto done;
}
}
up_read(&mm->mmap_sem);
if (!in_atomic)
mmput(mm);
}
/*
* we were unable to find this address anywhere,
* or some MMs were skipped because they were in use.
*/
sprintf(buf, "/* kernel dynamic memory */");
done:
write_unlock_irqrestore(&tasklist_lock, flags);
}
#define EXPAND_LEN ((1 << CONFIG_DEBUG_BFIN_HWTRACE_EXPAND_LEN) * 256 - 1)
/*
* Similar to get_user, do some address checking, then dereference
* Return true on success, false on bad address
*/
bool get_mem16(unsigned short *val, unsigned short *address)
{
unsigned long addr = (unsigned long)address;
/* Check for odd addresses */
if (addr & 0x1)
return false;
switch (bfin_mem_access_type(addr, 2)) {
case BFIN_MEM_ACCESS_CORE:
case BFIN_MEM_ACCESS_CORE_ONLY:
*val = *address;
return true;
case BFIN_MEM_ACCESS_DMA:
dma_memcpy(val, address, 2);
return true;
case BFIN_MEM_ACCESS_ITEST:
isram_memcpy(val, address, 2);
return true;
default: /* invalid access */
return false;
}
}
bool get_instruction(unsigned int *val, unsigned short *address)
{
unsigned long addr = (unsigned long)address;
unsigned short opcode0, opcode1;
/* Check for odd addresses */
if (addr & 0x1)
return false;
/* MMR region will never have instructions */
if (addr >= SYSMMR_BASE)
return false;
/* Scratchpad will never have instructions */
if (addr >= L1_SCRATCH_START && addr < L1_SCRATCH_START + L1_SCRATCH_LENGTH)
return false;
/* Data banks will never have instructions */
if (addr >= BOOT_ROM_START + BOOT_ROM_LENGTH && addr < L1_CODE_START)
return false;
if (!get_mem16(&opcode0, address))
return false;
/* was this a 32-bit instruction? If so, get the next 16 bits */
if ((opcode0 & 0xc000) == 0xc000) {
if (!get_mem16(&opcode1, address + 1))
return false;
*val = (opcode0 << 16) + opcode1;
} else
*val = opcode0;
return true;
}
#if defined(CONFIG_DEBUG_BFIN_HWTRACE_ON)
/*
* decode the instruction if we are printing out the trace, as it
* makes things easier to follow, without running it through objdump
* Decode the change of flow, and the common load/store instructions
* which are the main cause for faults, and discontinuities in the trace
* buffer.
*/
#define ProgCtrl_opcode 0x0000
#define ProgCtrl_poprnd_bits 0
#define ProgCtrl_poprnd_mask 0xf
#define ProgCtrl_prgfunc_bits 4
#define ProgCtrl_prgfunc_mask 0xf
#define ProgCtrl_code_bits 8
#define ProgCtrl_code_mask 0xff
static void decode_ProgCtrl_0(unsigned int opcode)
{
int poprnd = ((opcode >> ProgCtrl_poprnd_bits) & ProgCtrl_poprnd_mask);
int prgfunc = ((opcode >> ProgCtrl_prgfunc_bits) & ProgCtrl_prgfunc_mask);
if (prgfunc == 0 && poprnd == 0)
pr_cont("NOP");
else if (prgfunc == 1 && poprnd == 0)
pr_cont("RTS");
else if (prgfunc == 1 && poprnd == 1)
pr_cont("RTI");
else if (prgfunc == 1 && poprnd == 2)
pr_cont("RTX");
else if (prgfunc == 1 && poprnd == 3)
pr_cont("RTN");
else if (prgfunc == 1 && poprnd == 4)
pr_cont("RTE");
else if (prgfunc == 2 && poprnd == 0)
pr_cont("IDLE");
else if (prgfunc == 2 && poprnd == 3)
pr_cont("CSYNC");
else if (prgfunc == 2 && poprnd == 4)
pr_cont("SSYNC");
else if (prgfunc == 2 && poprnd == 5)
pr_cont("EMUEXCPT");
else if (prgfunc == 3)
pr_cont("CLI R%i", poprnd);
else if (prgfunc == 4)
pr_cont("STI R%i", poprnd);
else if (prgfunc == 5)
pr_cont("JUMP (P%i)", poprnd);
else if (prgfunc == 6)
pr_cont("CALL (P%i)", poprnd);
else if (prgfunc == 7)
pr_cont("CALL (PC + P%i)", poprnd);
else if (prgfunc == 8)
pr_cont("JUMP (PC + P%i", poprnd);
else if (prgfunc == 9)
pr_cont("RAISE %i", poprnd);
else if (prgfunc == 10)
pr_cont("EXCPT %i", poprnd);
else
pr_cont("0x%04x", opcode);
}
#define BRCC_opcode 0x1000
#define BRCC_offset_bits 0
#define BRCC_offset_mask 0x3ff
#define BRCC_B_bits 10
#define BRCC_B_mask 0x1
#define BRCC_T_bits 11
#define BRCC_T_mask 0x1
#define BRCC_code_bits 12
#define BRCC_code_mask 0xf
static void decode_BRCC_0(unsigned int opcode)
{
int B = ((opcode >> BRCC_B_bits) & BRCC_B_mask);
int T = ((opcode >> BRCC_T_bits) & BRCC_T_mask);
pr_cont("IF %sCC JUMP pcrel %s", T ? "" : "!", B ? "(BP)" : "");
}
#define CALLa_opcode 0xe2000000
#define CALLa_addr_bits 0
#define CALLa_addr_mask 0xffffff
#define CALLa_S_bits 24
#define CALLa_S_mask 0x1
#define CALLa_code_bits 25
#define CALLa_code_mask 0x7f
static void decode_CALLa_0(unsigned int opcode)
{
int S = ((opcode >> (CALLa_S_bits - 16)) & CALLa_S_mask);
if (S)
pr_cont("CALL pcrel");
else
pr_cont("JUMP.L");
}
#define LoopSetup_opcode 0xe0800000
#define LoopSetup_eoffset_bits 0
#define LoopSetup_eoffset_mask 0x3ff
#define LoopSetup_dontcare_bits 10
#define LoopSetup_dontcare_mask 0x3
#define LoopSetup_reg_bits 12
#define LoopSetup_reg_mask 0xf
#define LoopSetup_soffset_bits 16
#define LoopSetup_soffset_mask 0xf
#define LoopSetup_c_bits 20
#define LoopSetup_c_mask 0x1
#define LoopSetup_rop_bits 21
#define LoopSetup_rop_mask 0x3
#define LoopSetup_code_bits 23
#define LoopSetup_code_mask 0x1ff
static void decode_LoopSetup_0(unsigned int opcode)
{
int c = ((opcode >> LoopSetup_c_bits) & LoopSetup_c_mask);
int reg = ((opcode >> LoopSetup_reg_bits) & LoopSetup_reg_mask);
int rop = ((opcode >> LoopSetup_rop_bits) & LoopSetup_rop_mask);
pr_cont("LSETUP <> LC%i", c);
if ((rop & 1) == 1)
pr_cont("= P%i", reg);
if ((rop & 2) == 2)
pr_cont(" >> 0x1");
}
#define DspLDST_opcode 0x9c00
#define DspLDST_reg_bits 0
#define DspLDST_reg_mask 0x7
#define DspLDST_i_bits 3
#define DspLDST_i_mask 0x3
#define DspLDST_m_bits 5
#define DspLDST_m_mask 0x3
#define DspLDST_aop_bits 7
#define DspLDST_aop_mask 0x3
#define DspLDST_W_bits 9
#define DspLDST_W_mask 0x1
#define DspLDST_code_bits 10
#define DspLDST_code_mask 0x3f
static void decode_dspLDST_0(unsigned int opcode)
{
int i = ((opcode >> DspLDST_i_bits) & DspLDST_i_mask);
int m = ((opcode >> DspLDST_m_bits) & DspLDST_m_mask);
int W = ((opcode >> DspLDST_W_bits) & DspLDST_W_mask);
int aop = ((opcode >> DspLDST_aop_bits) & DspLDST_aop_mask);
int reg = ((opcode >> DspLDST_reg_bits) & DspLDST_reg_mask);
if (W == 0) {
pr_cont("R%i", reg);
switch (m) {
case 0:
pr_cont(" = ");
break;
case 1:
pr_cont(".L = ");
break;
case 2:
pr_cont(".W = ");
break;
}
}
pr_cont("[ I%i", i);
switch (aop) {
case 0:
pr_cont("++ ]");
break;
case 1:
pr_cont("-- ]");
break;
}
if (W == 1) {
pr_cont(" = R%i", reg);
switch (m) {
case 1:
pr_cont(".L = ");
break;
case 2:
pr_cont(".W = ");
break;
}
}
}
#define LDST_opcode 0x9000
#define LDST_reg_bits 0
#define LDST_reg_mask 0x7
#define LDST_ptr_bits 3
#define LDST_ptr_mask 0x7
#define LDST_Z_bits 6
#define LDST_Z_mask 0x1
#define LDST_aop_bits 7
#define LDST_aop_mask 0x3
#define LDST_W_bits 9
#define LDST_W_mask 0x1
#define LDST_sz_bits 10
#define LDST_sz_mask 0x3
#define LDST_code_bits 12
#define LDST_code_mask 0xf
static void decode_LDST_0(unsigned int opcode)
{
int Z = ((opcode >> LDST_Z_bits) & LDST_Z_mask);
int W = ((opcode >> LDST_W_bits) & LDST_W_mask);
int sz = ((opcode >> LDST_sz_bits) & LDST_sz_mask);
int aop = ((opcode >> LDST_aop_bits) & LDST_aop_mask);
int reg = ((opcode >> LDST_reg_bits) & LDST_reg_mask);
int ptr = ((opcode >> LDST_ptr_bits) & LDST_ptr_mask);
if (W == 0)
pr_cont("%s%i = ", (sz == 0 && Z == 1) ? "P" : "R", reg);
switch (sz) {
case 1:
pr_cont("W");
break;
case 2:
pr_cont("B");
break;
}
pr_cont("[P%i", ptr);
switch (aop) {
case 0:
pr_cont("++");
break;
case 1:
pr_cont("--");
break;
}
pr_cont("]");
if (W == 1)
pr_cont(" = %s%i ", (sz == 0 && Z == 1) ? "P" : "R", reg);
if (sz) {
if (Z)
pr_cont(" (X)");
else
pr_cont(" (Z)");
}
}
#define LDSTii_opcode 0xa000
#define LDSTii_reg_bit 0
#define LDSTii_reg_mask 0x7
#define LDSTii_ptr_bit 3
#define LDSTii_ptr_mask 0x7
#define LDSTii_offset_bit 6
#define LDSTii_offset_mask 0xf
#define LDSTii_op_bit 10
#define LDSTii_op_mask 0x3
#define LDSTii_W_bit 12
#define LDSTii_W_mask 0x1
#define LDSTii_code_bit 13
#define LDSTii_code_mask 0x7
static void decode_LDSTii_0(unsigned int opcode)
{
int reg = ((opcode >> LDSTii_reg_bit) & LDSTii_reg_mask);
int ptr = ((opcode >> LDSTii_ptr_bit) & LDSTii_ptr_mask);
int offset = ((opcode >> LDSTii_offset_bit) & LDSTii_offset_mask);
int op = ((opcode >> LDSTii_op_bit) & LDSTii_op_mask);
int W = ((opcode >> LDSTii_W_bit) & LDSTii_W_mask);
if (W == 0) {
pr_cont("%s%i = %s[P%i + %i]", op == 3 ? "R" : "P", reg,
op == 1 || op == 2 ? "" : "W", ptr, offset);
if (op == 2)
pr_cont("(Z)");
if (op == 3)
pr_cont("(X)");
} else {
pr_cont("%s[P%i + %i] = %s%i", op == 0 ? "" : "W", ptr,
offset, op == 3 ? "P" : "R", reg);
}
}
#define LDSTidxI_opcode 0xe4000000
#define LDSTidxI_offset_bits 0
#define LDSTidxI_offset_mask 0xffff
#define LDSTidxI_reg_bits 16
#define LDSTidxI_reg_mask 0x7
#define LDSTidxI_ptr_bits 19
#define LDSTidxI_ptr_mask 0x7
#define LDSTidxI_sz_bits 22
#define LDSTidxI_sz_mask 0x3
#define LDSTidxI_Z_bits 24
#define LDSTidxI_Z_mask 0x1
#define LDSTidxI_W_bits 25
#define LDSTidxI_W_mask 0x1
#define LDSTidxI_code_bits 26
#define LDSTidxI_code_mask 0x3f
static void decode_LDSTidxI_0(unsigned int opcode)
{
int Z = ((opcode >> LDSTidxI_Z_bits) & LDSTidxI_Z_mask);
int W = ((opcode >> LDSTidxI_W_bits) & LDSTidxI_W_mask);
int sz = ((opcode >> LDSTidxI_sz_bits) & LDSTidxI_sz_mask);
int reg = ((opcode >> LDSTidxI_reg_bits) & LDSTidxI_reg_mask);
int ptr = ((opcode >> LDSTidxI_ptr_bits) & LDSTidxI_ptr_mask);
int offset = ((opcode >> LDSTidxI_offset_bits) & LDSTidxI_offset_mask);
if (W == 0)
pr_cont("%s%i = ", sz == 0 && Z == 1 ? "P" : "R", reg);
if (sz == 1)
pr_cont("W");
if (sz == 2)
pr_cont("B");
pr_cont("[P%i + %s0x%x]", ptr, offset & 0x20 ? "-" : "",
(offset & 0x1f) << 2);
if (W == 0 && sz != 0) {
if (Z)
pr_cont("(X)");
else
pr_cont("(Z)");
}
if (W == 1)
pr_cont("= %s%i", (sz == 0 && Z == 1) ? "P" : "R", reg);
}
static void decode_opcode(unsigned int opcode)
{
#ifdef CONFIG_BUG
if (opcode == BFIN_BUG_OPCODE)
pr_cont("BUG");
else
#endif
if ((opcode & 0xffffff00) == ProgCtrl_opcode)
decode_ProgCtrl_0(opcode);
else if ((opcode & 0xfffff000) == BRCC_opcode)
decode_BRCC_0(opcode);
else if ((opcode & 0xfffff000) == 0x2000)
pr_cont("JUMP.S");
else if ((opcode & 0xfe000000) == CALLa_opcode)
decode_CALLa_0(opcode);
else if ((opcode & 0xff8000C0) == LoopSetup_opcode)
decode_LoopSetup_0(opcode);
else if ((opcode & 0xfffffc00) == DspLDST_opcode)
decode_dspLDST_0(opcode);
else if ((opcode & 0xfffff000) == LDST_opcode)
decode_LDST_0(opcode);
else if ((opcode & 0xffffe000) == LDSTii_opcode)
decode_LDSTii_0(opcode);
else if ((opcode & 0xfc000000) == LDSTidxI_opcode)
decode_LDSTidxI_0(opcode);
else if (opcode & 0xffff0000)
pr_cont("0x%08x", opcode);
else
pr_cont("0x%04x", opcode);
}
#define BIT_MULTI_INS 0x08000000
static void decode_instruction(unsigned short *address)
{
unsigned int opcode;
if (!get_instruction(&opcode, address))
return;
decode_opcode(opcode);
/* If things are a 32-bit instruction, it has the possibility of being
* a multi-issue instruction (a 32-bit, and 2 16 bit instrucitions)
* This test collidates with the unlink instruction, so disallow that
*/
if ((opcode & 0xc0000000) == 0xc0000000 &&
(opcode & BIT_MULTI_INS) &&
(opcode & 0xe8000000) != 0xe8000000) {
pr_cont(" || ");
if (!get_instruction(&opcode, address + 2))
return;
decode_opcode(opcode);
pr_cont(" || ");
if (!get_instruction(&opcode, address + 3))
return;
decode_opcode(opcode);
}
}
#endif
void dump_bfin_trace_buffer(void)
{
#ifdef CONFIG_DEBUG_BFIN_HWTRACE_ON
int tflags, i = 0, fault = 0;
char buf[150];
unsigned short *addr;
unsigned int cpu = raw_smp_processor_id();
#ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND
int j, index;
#endif
trace_buffer_save(tflags);
pr_notice("Hardware Trace:\n");
#ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND
pr_notice("WARNING: Expanded trace turned on - can not trace exceptions\n");
#endif
if (likely(bfin_read_TBUFSTAT() & TBUFCNT)) {
for (; bfin_read_TBUFSTAT() & TBUFCNT; i++) {
addr = (unsigned short *)bfin_read_TBUF();
decode_address(buf, (unsigned long)addr);
pr_notice("%4i Target : %s\n", i, buf);
/* Normally, the faulting instruction doesn't go into
* the trace buffer, (since it doesn't commit), so
* we print out the fault address here
*/
if (!fault && addr == ((unsigned short *)evt_ivhw)) {
addr = (unsigned short *)bfin_read_TBUF();
decode_address(buf, (unsigned long)addr);
pr_notice(" FAULT : %s ", buf);
decode_instruction(addr);
pr_cont("\n");
fault = 1;
continue;
}
if (!fault && addr == (unsigned short *)trap &&
(cpu_pda[cpu].seqstat & SEQSTAT_EXCAUSE) > VEC_EXCPT15) {
decode_address(buf, cpu_pda[cpu].icplb_fault_addr);
pr_notice(" FAULT : %s ", buf);
decode_instruction((unsigned short *)cpu_pda[cpu].icplb_fault_addr);
pr_cont("\n");
fault = 1;
}
addr = (unsigned short *)bfin_read_TBUF();
decode_address(buf, (unsigned long)addr);
pr_notice(" Source : %s ", buf);
decode_instruction(addr);
pr_cont("\n");
}
}
#ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND
if (trace_buff_offset)
index = trace_buff_offset / 4;
else
index = EXPAND_LEN;
j = (1 << CONFIG_DEBUG_BFIN_HWTRACE_EXPAND_LEN) * 128;
while (j) {
decode_address(buf, software_trace_buff[index]);
pr_notice("%4i Target : %s\n", i, buf);
index -= 1;
if (index < 0)
index = EXPAND_LEN;
decode_address(buf, software_trace_buff[index]);
pr_notice(" Source : %s ", buf);
decode_instruction((unsigned short *)software_trace_buff[index]);
pr_cont("\n");
index -= 1;
if (index < 0)
index = EXPAND_LEN;
j--;
i++;
}
#endif
trace_buffer_restore(tflags);
#endif
}
EXPORT_SYMBOL(dump_bfin_trace_buffer);
void dump_bfin_process(struct pt_regs *fp)
{
/* We should be able to look at fp->ipend, but we don't push it on the
* stack all the time, so do this until we fix that */
unsigned int context = bfin_read_IPEND();
if (oops_in_progress)
pr_emerg("Kernel OOPS in progress\n");
if (context & 0x0020 && (fp->seqstat & SEQSTAT_EXCAUSE) == VEC_HWERR)
pr_notice("HW Error context\n");
else if (context & 0x0020)
pr_notice("Deferred Exception context\n");
else if (context & 0x3FC0)
pr_notice("Interrupt context\n");
else if (context & 0x4000)
pr_notice("Deferred Interrupt context\n");
else if (context & 0x8000)
pr_notice("Kernel process context\n");
/* Because we are crashing, and pointers could be bad, we check things
* pretty closely before we use them
*/
if ((unsigned long)current >= FIXED_CODE_START &&
!((unsigned long)current & 0x3) && current->pid) {
pr_notice("CURRENT PROCESS:\n");
if (current->comm >= (char *)FIXED_CODE_START)
pr_notice("COMM=%s PID=%d",
current->comm, current->pid);
else
pr_notice("COMM= invalid");
pr_cont(" CPU=%d\n", current_thread_info()->cpu);
if (!((unsigned long)current->mm & 0x3) &&
(unsigned long)current->mm >= FIXED_CODE_START) {
pr_notice("TEXT = 0x%p-0x%p DATA = 0x%p-0x%p\n",
(void *)current->mm->start_code,
(void *)current->mm->end_code,
(void *)current->mm->start_data,
(void *)current->mm->end_data);
pr_notice(" BSS = 0x%p-0x%p USER-STACK = 0x%p\n\n",
(void *)current->mm->end_data,
(void *)current->mm->brk,
(void *)current->mm->start_stack);
} else
pr_notice("invalid mm\n");
} else
pr_notice("No Valid process in current context\n");
}
void dump_bfin_mem(struct pt_regs *fp)
{
unsigned short *addr, *erraddr, val = 0, err = 0;
char sti = 0, buf[6];
erraddr = (void *)fp->pc;
pr_notice("return address: [0x%p]; contents of:", erraddr);
for (addr = (unsigned short *)((unsigned long)erraddr & ~0xF) - 0x10;
addr < (unsigned short *)((unsigned long)erraddr & ~0xF) + 0x10;
addr++) {
if (!((unsigned long)addr & 0xF))
pr_notice("0x%p: ", addr);
if (!get_mem16(&val, addr)) {
val = 0;
sprintf(buf, "????");
} else
sprintf(buf, "%04x", val);
if (addr == erraddr) {
pr_cont("[%s]", buf);
err = val;
} else
pr_cont(" %s ", buf);
/* Do any previous instructions turn on interrupts? */
if (addr <= erraddr && /* in the past */
((val >= 0x0040 && val <= 0x0047) || /* STI instruction */
val == 0x017b)) /* [SP++] = RETI */
sti = 1;
}
pr_cont("\n");
/* Hardware error interrupts can be deferred */
if (unlikely(sti && (fp->seqstat & SEQSTAT_EXCAUSE) == VEC_HWERR &&
oops_in_progress)){
pr_notice("Looks like this was a deferred error - sorry\n");
#ifndef CONFIG_DEBUG_HWERR
pr_notice("The remaining message may be meaningless\n");
pr_notice("You should enable CONFIG_DEBUG_HWERR to get a better idea where it came from\n");
#else
/* If we are handling only one peripheral interrupt
* and current mm and pid are valid, and the last error
* was in that user space process's text area
* print it out - because that is where the problem exists
*/
if ((!(((fp)->ipend & ~0x30) & (((fp)->ipend & ~0x30) - 1))) &&
(current->pid && current->mm)) {
/* And the last RETI points to the current userspace context */
if ((fp + 1)->pc >= current->mm->start_code &&
(fp + 1)->pc <= current->mm->end_code) {
pr_notice("It might be better to look around here :\n");
pr_notice("-------------------------------------------\n");
show_regs(fp + 1);
pr_notice("-------------------------------------------\n");
}
}
#endif
}
}
void show_regs(struct pt_regs *fp)
{
char buf[150];
struct irqaction *action;
unsigned int i;
unsigned long flags = 0;
unsigned int cpu = raw_smp_processor_id();
unsigned char in_atomic = (bfin_read_IPEND() & 0x10) || in_atomic();
pr_notice("\n");
if (CPUID != bfin_cpuid())
pr_notice("Compiled for cpu family 0x%04x (Rev %d), "
"but running on:0x%04x (Rev %d)\n",
CPUID, bfin_compiled_revid(), bfin_cpuid(), bfin_revid());
pr_notice("ADSP-%s-0.%d",
CPU, bfin_compiled_revid());
if (bfin_compiled_revid() != bfin_revid())
pr_cont("(Detected 0.%d)", bfin_revid());
pr_cont(" %lu(MHz CCLK) %lu(MHz SCLK) (%s)\n",
get_cclk()/1000000, get_sclk()/1000000,
#ifdef CONFIG_MPU
"mpu on"
#else
"mpu off"
#endif
);
pr_notice("%s", linux_banner);
pr_notice("\nSEQUENCER STATUS:\t\t%s\n", print_tainted());
pr_notice(" SEQSTAT: %08lx IPEND: %04lx IMASK: %04lx SYSCFG: %04lx\n",
(long)fp->seqstat, fp->ipend, cpu_pda[raw_smp_processor_id()].ex_imask, fp->syscfg);
if (fp->ipend & EVT_IRPTEN)
pr_notice(" Global Interrupts Disabled (IPEND[4])\n");
if (!(cpu_pda[raw_smp_processor_id()].ex_imask & (EVT_IVG13 | EVT_IVG12 | EVT_IVG11 |
EVT_IVG10 | EVT_IVG9 | EVT_IVG8 | EVT_IVG7 | EVT_IVTMR)))
pr_notice(" Peripheral interrupts masked off\n");
if (!(cpu_pda[raw_smp_processor_id()].ex_imask & (EVT_IVG15 | EVT_IVG14)))
pr_notice(" Kernel interrupts masked off\n");
if ((fp->seqstat & SEQSTAT_EXCAUSE) == VEC_HWERR) {
pr_notice(" HWERRCAUSE: 0x%lx\n",
(fp->seqstat & SEQSTAT_HWERRCAUSE) >> 14);
#ifdef EBIU_ERRMST
/* If the error was from the EBIU, print it out */
if (bfin_read_EBIU_ERRMST() & CORE_ERROR) {
pr_notice(" EBIU Error Reason : 0x%04x\n",
bfin_read_EBIU_ERRMST());
pr_notice(" EBIU Error Address : 0x%08x\n",
bfin_read_EBIU_ERRADD());
}
#endif
}
pr_notice(" EXCAUSE : 0x%lx\n",
fp->seqstat & SEQSTAT_EXCAUSE);
for (i = 2; i <= 15 ; i++) {
if (fp->ipend & (1 << i)) {
if (i != 4) {
decode_address(buf, bfin_read32(EVT0 + 4*i));
pr_notice(" physical IVG%i asserted : %s\n", i, buf);
} else
pr_notice(" interrupts disabled\n");
}
}
/* if no interrupts are going off, don't print this out */
if (fp->ipend & ~0x3F) {
for (i = 0; i < (NR_IRQS - 1); i++) {
if (!in_atomic)
raw_spin_lock_irqsave(&irq_desc[i].lock, flags);
action = irq_desc[i].action;
if (!action)
goto unlock;
decode_address(buf, (unsigned int)action->handler);
pr_notice(" logical irq %3d mapped : %s", i, buf);
for (action = action->next; action; action = action->next) {
decode_address(buf, (unsigned int)action->handler);
pr_cont(", %s", buf);
}
pr_cont("\n");
unlock:
if (!in_atomic)
raw_spin_unlock_irqrestore(&irq_desc[i].lock, flags);
}
}
decode_address(buf, fp->rete);
pr_notice(" RETE: %s\n", buf);
decode_address(buf, fp->retn);
pr_notice(" RETN: %s\n", buf);
decode_address(buf, fp->retx);
pr_notice(" RETX: %s\n", buf);
decode_address(buf, fp->rets);
pr_notice(" RETS: %s\n", buf);
decode_address(buf, fp->pc);
pr_notice(" PC : %s\n", buf);
if (((long)fp->seqstat & SEQSTAT_EXCAUSE) &&
(((long)fp->seqstat & SEQSTAT_EXCAUSE) != VEC_HWERR)) {
decode_address(buf, cpu_pda[cpu].dcplb_fault_addr);
pr_notice("DCPLB_FAULT_ADDR: %s\n", buf);
decode_address(buf, cpu_pda[cpu].icplb_fault_addr);
pr_notice("ICPLB_FAULT_ADDR: %s\n", buf);
}
pr_notice("PROCESSOR STATE:\n");
pr_notice(" R0 : %08lx R1 : %08lx R2 : %08lx R3 : %08lx\n",
fp->r0, fp->r1, fp->r2, fp->r3);
pr_notice(" R4 : %08lx R5 : %08lx R6 : %08lx R7 : %08lx\n",
fp->r4, fp->r5, fp->r6, fp->r7);
pr_notice(" P0 : %08lx P1 : %08lx P2 : %08lx P3 : %08lx\n",
fp->p0, fp->p1, fp->p2, fp->p3);
pr_notice(" P4 : %08lx P5 : %08lx FP : %08lx SP : %08lx\n",
fp->p4, fp->p5, fp->fp, (long)fp);
pr_notice(" LB0: %08lx LT0: %08lx LC0: %08lx\n",
fp->lb0, fp->lt0, fp->lc0);
pr_notice(" LB1: %08lx LT1: %08lx LC1: %08lx\n",
fp->lb1, fp->lt1, fp->lc1);
pr_notice(" B0 : %08lx L0 : %08lx M0 : %08lx I0 : %08lx\n",
fp->b0, fp->l0, fp->m0, fp->i0);
pr_notice(" B1 : %08lx L1 : %08lx M1 : %08lx I1 : %08lx\n",
fp->b1, fp->l1, fp->m1, fp->i1);
pr_notice(" B2 : %08lx L2 : %08lx M2 : %08lx I2 : %08lx\n",
fp->b2, fp->l2, fp->m2, fp->i2);
pr_notice(" B3 : %08lx L3 : %08lx M3 : %08lx I3 : %08lx\n",
fp->b3, fp->l3, fp->m3, fp->i3);
pr_notice("A0.w: %08lx A0.x: %08lx A1.w: %08lx A1.x: %08lx\n",
fp->a0w, fp->a0x, fp->a1w, fp->a1x);
pr_notice("USP : %08lx ASTAT: %08lx\n",
rdusp(), fp->astat);
pr_notice("\n");
}
arch/blackfin/kernel/traps.c
View file @ 064e297c
/*
* Copyright 2004-2009 Analog Devices Inc.
* Main exception handling logic.
*
* Copyright 2004-2010 Analog Devices Inc.
*
* Licensed under the GPL-2 or later
*/
#include <linux/bug.h>
#include <linux/uaccess.h>
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/kallsyms.h>
#include <linux/fs.h>
#include <linux/rbtree.h>
#include <asm/traps.h>
#include <asm/cacheflush.h>
#include <asm/cplb.h>
#include <asm/dma.h>
#include <asm/blackfin.h>
#include <asm/irq_handler.h>
#include <linux/irq.h>
#include <asm/trace.h>
#include <asm/fixed_code.h>
#include <asm/pseudo_instructions.h>
#ifdef CONFIG_KGDB
# include <linux/kgdb.h>
......@@ -62,194 +59,6 @@ void __init trap_init(void)
CSYNC();
}
static void decode_address(char *buf, unsigned long address)
{
#ifdef CONFIG_DEBUG_VERBOSE
struct task_struct *p;
struct mm_struct *mm;
unsigned long flags, offset;
unsigned char in_atomic = (bfin_read_IPEND() & 0x10) || in_atomic();
struct rb_node *n;
#ifdef CONFIG_KALLSYMS
unsigned long symsize;
const char *symname;
char *modname;
char *delim = ":";
char namebuf[128];
#endif
buf += sprintf(buf, "<0x%08lx> ", address);
#ifdef CONFIG_KALLSYMS
/* look up the address and see if we are in kernel space */
symname = kallsyms_lookup(address, &symsize, &offset, &modname, namebuf);
if (symname) {
/* yeah! kernel space! */
if (!modname)
modname = delim = "";
sprintf(buf, "{ %s%s%s%s + 0x%lx }",
delim, modname, delim, symname,
(unsigned long)offset);
return;
}
#endif
if (address >= FIXED_CODE_START && address < FIXED_CODE_END) {
/* Problem in fixed code section? */
strcat(buf, "/* Maybe fixed code section */");
return;
} else if (address < CONFIG_BOOT_LOAD) {
/* Problem somewhere before the kernel start address */
strcat(buf, "/* Maybe null pointer? */");
return;
} else if (address >= COREMMR_BASE) {
strcat(buf, "/* core mmrs */");
return;
} else if (address >= SYSMMR_BASE) {
strcat(buf, "/* system mmrs */");
return;
} else if (address >= L1_ROM_START && address < L1_ROM_START + L1_ROM_LENGTH) {
strcat(buf, "/* on-chip L1 ROM */");
return;
}
/*
* Don't walk any of the vmas if we are oopsing, it has been known
* to cause problems - corrupt vmas (kernel crashes) cause double faults
*/
if (oops_in_progress) {
strcat(buf, "/* kernel dynamic memory (maybe user-space) */");
return;
}
/* looks like we're off in user-land, so let's walk all the
* mappings of all our processes and see if we can't be a whee
* bit more specific
*/
write_lock_irqsave(&tasklist_lock, flags);
for_each_process(p) {
mm = (in_atomic ? p->mm : get_task_mm(p));
if (!mm)
continue;
if (!down_read_trylock(&mm->mmap_sem)) {
if (!in_atomic)
mmput(mm);
continue;
}
for (n = rb_first(&mm->mm_rb); n; n = rb_next(n)) {
struct vm_area_struct *vma;
vma = rb_entry(n, struct vm_area_struct, vm_rb);
if (address >= vma->vm_start && address < vma->vm_end) {
char _tmpbuf[256];
char *name = p->comm;
struct file *file = vma->vm_file;
if (file) {
char *d_name = d_path(&file->f_path, _tmpbuf,
sizeof(_tmpbuf));
if (!IS_ERR(d_name))
name = d_name;
}
/* FLAT does not have its text aligned to the start of
* the map while FDPIC ELF does ...
*/
/* before we can check flat/fdpic, we need to
* make sure current is valid
*/
if ((unsigned long)current >= FIXED_CODE_START &&
!((unsigned long)current & 0x3)) {
if (current->mm &&
(address > current->mm->start_code) &&
(address < current->mm->end_code))
offset = address - current->mm->start_code;
else
offset = (address - vma->vm_start) +
(vma->vm_pgoff << PAGE_SHIFT);
sprintf(buf, "[ %s + 0x%lx ]", name, offset);
} else
sprintf(buf, "[ %s vma:0x%lx-0x%lx]",
name, vma->vm_start, vma->vm_end);
up_read(&mm->mmap_sem);
if (!in_atomic)
mmput(mm);
if (buf[0] == '\0')
sprintf(buf, "[ %s ] dynamic memory", name);
goto done;
}
}
up_read(&mm->mmap_sem);
if (!in_atomic)
mmput(mm);
}
/*
* we were unable to find this address anywhere,
* or some MMs were skipped because they were in use.
*/
sprintf(buf, "/* kernel dynamic memory */");
done:
write_unlock_irqrestore(&tasklist_lock, flags);
#else
sprintf(buf, " ");
#endif
}
asmlinkage void double_fault_c(struct pt_regs *fp)
{
#ifdef CONFIG_DEBUG_BFIN_HWTRACE_ON
int j;
trace_buffer_save(j);
#endif
console_verbose();
oops_in_progress = 1;
#ifdef CONFIG_DEBUG_VERBOSE
printk(KERN_EMERG "Double Fault\n");
#ifdef CONFIG_DEBUG_DOUBLEFAULT_PRINT
if (((long)fp->seqstat & SEQSTAT_EXCAUSE) == VEC_UNCOV) {
unsigned int cpu = raw_smp_processor_id();
char buf[150];
decode_address(buf, cpu_pda[cpu].retx_doublefault);
printk(KERN_EMERG "While handling exception (EXCAUSE = 0x%x) at %s:\n",
(unsigned int)cpu_pda[cpu].seqstat_doublefault & SEQSTAT_EXCAUSE, buf);
decode_address(buf, cpu_pda[cpu].dcplb_doublefault_addr);
printk(KERN_NOTICE " DCPLB_FAULT_ADDR: %s\n", buf);
decode_address(buf, cpu_pda[cpu].icplb_doublefault_addr);
printk(KERN_NOTICE " ICPLB_FAULT_ADDR: %s\n", buf);
decode_address(buf, fp->retx);
printk(KERN_NOTICE "The instruction at %s caused a double exception\n", buf);
} else
#endif
{
dump_bfin_process(fp);
dump_bfin_mem(fp);
show_regs(fp);
dump_bfin_trace_buffer();
}
#endif
panic("Double Fault - unrecoverable event");
}
static int kernel_mode_regs(struct pt_regs *regs)
{
return regs->ipend & 0xffc0;
......@@ -259,6 +68,9 @@ asmlinkage notrace void trap_c(struct pt_regs *fp)
{
#ifdef CONFIG_DEBUG_BFIN_HWTRACE_ON
int j;
#endif
#ifdef CONFIG_BFIN_PSEUDODBG_INSNS
int opcode;
#endif
unsigned int cpu = raw_smp_processor_id();
const char *strerror = NULL;
......@@ -391,6 +203,19 @@ asmlinkage notrace void trap_c(struct pt_regs *fp)
panic("BUG()");
}
}
#endif
#ifdef CONFIG_BFIN_PSEUDODBG_INSNS
/*
* Support for the fake instructions, if the instruction fails,
* then just execute a illegal opcode failure (like normal).
* Don't support these instructions inside the kernel
*/
if (!kernel_mode_regs(fp) && get_instruction(&opcode, (unsigned short *)fp->pc)) {
if (execute_pseudodbg_assert(fp, opcode))
goto traps_done;
if (execute_pseudodbg(fp, opcode))
goto traps_done;
}
#endif
info.si_code = ILL_ILLOPC;
sig = SIGILL;
......@@ -672,659 +497,44 @@ asmlinkage notrace void trap_c(struct pt_regs *fp)
trace_buffer_restore(j);
}
/* Typical exception handling routines */
#define EXPAND_LEN ((1 << CONFIG_DEBUG_BFIN_HWTRACE_EXPAND_LEN) * 256 - 1)
/*
* Similar to get_user, do some address checking, then dereference
* Return true on success, false on bad address
*/
static bool get_instruction(unsigned short *val, unsigned short *address)
{
unsigned long addr = (unsigned long)address;
/* Check for odd addresses */
if (addr & 0x1)
return false;
/* MMR region will never have instructions */
if (addr >= SYSMMR_BASE)
return false;
switch (bfin_mem_access_type(addr, 2)) {
case BFIN_MEM_ACCESS_CORE:
case BFIN_MEM_ACCESS_CORE_ONLY:
*val = *address;
return true;
case BFIN_MEM_ACCESS_DMA:
dma_memcpy(val, address, 2);
return true;
case BFIN_MEM_ACCESS_ITEST:
isram_memcpy(val, address, 2);
return true;
default: /* invalid access */
return false;
}
}
/*
* decode the instruction if we are printing out the trace, as it
* makes things easier to follow, without running it through objdump
* These are the normal instructions which cause change of flow, which
* would be at the source of the trace buffer
*/
#if defined(CONFIG_DEBUG_VERBOSE) && defined(CONFIG_DEBUG_BFIN_HWTRACE_ON)
static void decode_instruction(unsigned short *address)
{
unsigned short opcode;
if (get_instruction(&opcode, address)) {
if (opcode == 0x0010)
verbose_printk("RTS");
else if (opcode == 0x0011)
verbose_printk("RTI");
else if (opcode == 0x0012)
verbose_printk("RTX");
else if (opcode == 0x0013)
verbose_printk("RTN");
else if (opcode == 0x0014)
verbose_printk("RTE");
else if (opcode == 0x0025)
verbose_printk("EMUEXCPT");
else if (opcode >= 0x0040 && opcode <= 0x0047)
verbose_printk("STI R%i", opcode & 7);
else if (opcode >= 0x0050 && opcode <= 0x0057)
verbose_printk("JUMP (P%i)", opcode & 7);
else if (opcode >= 0x0060 && opcode <= 0x0067)
verbose_printk("CALL (P%i)", opcode & 7);
else if (opcode >= 0x0070 && opcode <= 0x0077)
verbose_printk("CALL (PC+P%i)", opcode & 7);
else if (opcode >= 0x0080 && opcode <= 0x0087)
verbose_printk("JUMP (PC+P%i)", opcode & 7);
else if (opcode >= 0x0090 && opcode <= 0x009F)
verbose_printk("RAISE 0x%x", opcode & 0xF);
else if (opcode >= 0x00A0 && opcode <= 0x00AF)
verbose_printk("EXCPT 0x%x", opcode & 0xF);
else if ((opcode >= 0x1000 && opcode <= 0x13FF) || (opcode >= 0x1800 && opcode <= 0x1BFF))
verbose_printk("IF !CC JUMP");
else if ((opcode >= 0x1400 && opcode <= 0x17ff) || (opcode >= 0x1c00 && opcode <= 0x1fff))
verbose_printk("IF CC JUMP");
else if (opcode >= 0x2000 && opcode <= 0x2fff)
verbose_printk("JUMP.S");
else if (opcode >= 0xe080 && opcode <= 0xe0ff)
verbose_printk("LSETUP");
else if (opcode >= 0xe200 && opcode <= 0xe2ff)
verbose_printk("JUMP.L");
else if (opcode >= 0xe300 && opcode <= 0xe3ff)
verbose_printk("CALL pcrel");
else
verbose_printk("0x%04x", opcode);
}
}
#endif
void dump_bfin_trace_buffer(void)
{
#ifdef CONFIG_DEBUG_VERBOSE
#ifdef CONFIG_DEBUG_BFIN_HWTRACE_ON
int tflags, i = 0;
char buf[150];
unsigned short *addr;
#ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND
int j, index;
#endif
trace_buffer_save(tflags);
printk(KERN_NOTICE "Hardware Trace:\n");
#ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND
printk(KERN_NOTICE "WARNING: Expanded trace turned on - can not trace exceptions\n");
#endif
if (likely(bfin_read_TBUFSTAT() & TBUFCNT)) {
for (; bfin_read_TBUFSTAT() & TBUFCNT; i++) {
decode_address(buf, (unsigned long)bfin_read_TBUF());
printk(KERN_NOTICE "%4i Target : %s\n", i, buf);
addr = (unsigned short *)bfin_read_TBUF();
decode_address(buf, (unsigned long)addr);
printk(KERN_NOTICE " Source : %s ", buf);
decode_instruction(addr);
printk("\n");
}
}
#ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND
if (trace_buff_offset)
index = trace_buff_offset / 4;
else
index = EXPAND_LEN;
j = (1 << CONFIG_DEBUG_BFIN_HWTRACE_EXPAND_LEN) * 128;
while (j) {
decode_address(buf, software_trace_buff[index]);
printk(KERN_NOTICE "%4i Target : %s\n", i, buf);
index -= 1;
if (index < 0 )
index = EXPAND_LEN;
decode_address(buf, software_trace_buff[index]);
printk(KERN_NOTICE " Source : %s ", buf);
decode_instruction((unsigned short *)software_trace_buff[index]);
printk("\n");
index -= 1;
if (index < 0)
index = EXPAND_LEN;
j--;
i++;
}
#endif
trace_buffer_restore(tflags);
#endif
#endif
}
EXPORT_SYMBOL(dump_bfin_trace_buffer);
#ifdef CONFIG_BUG
int is_valid_bugaddr(unsigned long addr)
{
unsigned short opcode;
if (!get_instruction(&opcode, (unsigned short *)addr))
return 0;
return opcode == BFIN_BUG_OPCODE;
}
#endif
/*
* Checks to see if the address pointed to is either a
* 16-bit CALL instruction, or a 32-bit CALL instruction
*/
static bool is_bfin_call(unsigned short *addr)
{
unsigned short opcode = 0, *ins_addr;
ins_addr = (unsigned short *)addr;
if (!get_instruction(&opcode, ins_addr))
return false;
if ((opcode >= 0x0060 && opcode <= 0x0067) ||
(opcode >= 0x0070 && opcode <= 0x0077))
return true;
ins_addr--;
if (!get_instruction(&opcode, ins_addr))
return false;
if (opcode >= 0xE300 && opcode <= 0xE3FF)
return true;
return false;
}
void show_stack(struct task_struct *task, unsigned long *stack)
{
#ifdef CONFIG_PRINTK
unsigned int *addr, *endstack, *fp = 0, *frame;
unsigned short *ins_addr;
char buf[150];
unsigned int i, j, ret_addr, frame_no = 0;
/*
* If we have been passed a specific stack, use that one otherwise
* if we have been passed a task structure, use that, otherwise
* use the stack of where the variable "stack" exists
*/
if (stack == NULL) {
if (task) {
/* We know this is a kernel stack, so this is the start/end */
stack = (unsigned long *)task->thread.ksp;
endstack = (unsigned int *)(((unsigned int)(stack) & ~(THREAD_SIZE - 1)) + THREAD_SIZE);
} else {
/* print out the existing stack info */
stack = (unsigned long *)&stack;
endstack = (unsigned int *)PAGE_ALIGN((unsigned int)stack);
}
} else
endstack = (unsigned int *)PAGE_ALIGN((unsigned int)stack);
printk(KERN_NOTICE "Stack info:\n");
decode_address(buf, (unsigned int)stack);
printk(KERN_NOTICE " SP: [0x%p] %s\n", stack, buf);
if (!access_ok(VERIFY_READ, stack, (unsigned int)endstack - (unsigned int)stack)) {
printk(KERN_NOTICE "Invalid stack pointer\n");
return;
}
/* First thing is to look for a frame pointer */
for (addr = (unsigned int *)((unsigned int)stack & ~0xF); addr < endstack; addr++) {
if (*addr & 0x1)
continue;
ins_addr = (unsigned short *)*addr;
ins_addr--;
if (is_bfin_call(ins_addr))
fp = addr - 1;
if (fp) {
/* Let's check to see if it is a frame pointer */
while (fp >= (addr - 1) && fp < endstack
&& fp && ((unsigned int) fp & 0x3) == 0)
fp = (unsigned int *)*fp;
if (fp == 0 || fp == endstack) {
fp = addr - 1;
break;
}
fp = 0;
}
}
if (fp) {
frame = fp;
printk(KERN_NOTICE " FP: (0x%p)\n", fp);
} else
frame = 0;
/*
* Now that we think we know where things are, we
* walk the stack again, this time printing things out
* incase there is no frame pointer, we still look for
* valid return addresses
*/
/* First time print out data, next time, print out symbols */
for (j = 0; j <= 1; j++) {
if (j)
printk(KERN_NOTICE "Return addresses in stack:\n");
else
printk(KERN_NOTICE " Memory from 0x%08lx to %p", ((long unsigned int)stack & ~0xF), endstack);
fp = frame;
frame_no = 0;
for (addr = (unsigned int *)((unsigned int)stack & ~0xF), i = 0;
addr < endstack; addr++, i++) {
ret_addr = 0;
if (!j && i % 8 == 0)
printk(KERN_NOTICE "%p:",addr);
/* if it is an odd address, or zero, just skip it */
if (*addr & 0x1 || !*addr)
goto print;
ins_addr = (unsigned short *)*addr;
/* Go back one instruction, and see if it is a CALL */
ins_addr--;
ret_addr = is_bfin_call(ins_addr);
print:
if (!j && stack == (unsigned long *)addr)
printk("[%08x]", *addr);
else if (ret_addr)
if (j) {
decode_address(buf, (unsigned int)*addr);
if (frame == addr) {
printk(KERN_NOTICE " frame %2i : %s\n", frame_no, buf);
continue;
}
printk(KERN_NOTICE " address : %s\n", buf);
} else
printk("<%08x>", *addr);
else if (fp == addr) {
if (j)
frame = addr+1;
else
printk("(%08x)", *addr);
fp = (unsigned int *)*addr;
frame_no++;
} else if (!j)
printk(" %08x ", *addr);
}
if (!j)
printk("\n");
}
#endif
}
EXPORT_SYMBOL(show_stack);
void dump_stack(void)
asmlinkage void double_fault_c(struct pt_regs *fp)
{
unsigned long stack;
#ifdef CONFIG_DEBUG_BFIN_HWTRACE_ON
int tflags;
int j;
trace_buffer_save(j);
#endif
trace_buffer_save(tflags);
dump_bfin_trace_buffer();
show_stack(current, &stack);
trace_buffer_restore(tflags);
}
EXPORT_SYMBOL(dump_stack);
void dump_bfin_process(struct pt_regs *fp)
{
console_verbose();
oops_in_progress = 1;
#ifdef CONFIG_DEBUG_VERBOSE
/* We should be able to look at fp->ipend, but we don't push it on the
* stack all the time, so do this until we fix that */
unsigned int context = bfin_read_IPEND();
if (oops_in_progress)
verbose_printk(KERN_EMERG "Kernel OOPS in progress\n");
if (context & 0x0020 && (fp->seqstat & SEQSTAT_EXCAUSE) == VEC_HWERR)
verbose_printk(KERN_NOTICE "HW Error context\n");
else if (context & 0x0020)
verbose_printk(KERN_NOTICE "Deferred Exception context\n");
else if (context & 0x3FC0)
verbose_printk(KERN_NOTICE "Interrupt context\n");
else if (context & 0x4000)
verbose_printk(KERN_NOTICE "Deferred Interrupt context\n");
else if (context & 0x8000)
verbose_printk(KERN_NOTICE "Kernel process context\n");
/* Because we are crashing, and pointers could be bad, we check things
* pretty closely before we use them
*/
if ((unsigned long)current >= FIXED_CODE_START &&
!((unsigned long)current & 0x3) && current->pid) {
verbose_printk(KERN_NOTICE "CURRENT PROCESS:\n");
if (current->comm >= (char *)FIXED_CODE_START)
verbose_printk(KERN_NOTICE "COMM=%s PID=%d",
current->comm, current->pid);
else
verbose_printk(KERN_NOTICE "COMM= invalid");
printk(KERN_EMERG "Double Fault\n");
#ifdef CONFIG_DEBUG_DOUBLEFAULT_PRINT
if (((long)fp->seqstat & SEQSTAT_EXCAUSE) == VEC_UNCOV) {
unsigned int cpu = raw_smp_processor_id();
char buf[150];
decode_address(buf, cpu_pda[cpu].retx_doublefault);
printk(KERN_EMERG "While handling exception (EXCAUSE = 0x%x) at %s:\n",
(unsigned int)cpu_pda[cpu].seqstat_doublefault & SEQSTAT_EXCAUSE, buf);
decode_address(buf, cpu_pda[cpu].dcplb_doublefault_addr);
printk(KERN_NOTICE " DCPLB_FAULT_ADDR: %s\n", buf);
decode_address(buf, cpu_pda[cpu].icplb_doublefault_addr);
printk(KERN_NOTICE " ICPLB_FAULT_ADDR: %s\n", buf);
printk(KERN_CONT " CPU=%d\n", current_thread_info()->cpu);
if (!((unsigned long)current->mm & 0x3) && (unsigned long)current->mm >= FIXED_CODE_START)
verbose_printk(KERN_NOTICE
"TEXT = 0x%p-0x%p DATA = 0x%p-0x%p\n"
" BSS = 0x%p-0x%p USER-STACK = 0x%p\n\n",
(void *)current->mm->start_code,
(void *)current->mm->end_code,
(void *)current->mm->start_data,
(void *)current->mm->end_data,
(void *)current->mm->end_data,
(void *)current->mm->brk,
(void *)current->mm->start_stack);
else
verbose_printk(KERN_NOTICE "invalid mm\n");
decode_address(buf, fp->retx);
printk(KERN_NOTICE "The instruction at %s caused a double exception\n", buf);
} else
verbose_printk(KERN_NOTICE
"No Valid process in current context\n");
#endif
}
void dump_bfin_mem(struct pt_regs *fp)
{
#ifdef CONFIG_DEBUG_VERBOSE
unsigned short *addr, *erraddr, val = 0, err = 0;
char sti = 0, buf[6];
erraddr = (void *)fp->pc;
verbose_printk(KERN_NOTICE "return address: [0x%p]; contents of:", erraddr);
for (addr = (unsigned short *)((unsigned long)erraddr & ~0xF) - 0x10;
addr < (unsigned short *)((unsigned long)erraddr & ~0xF) + 0x10;
addr++) {
if (!((unsigned long)addr & 0xF))
verbose_printk(KERN_NOTICE "0x%p: ", addr);
if (!get_instruction(&val, addr)) {
val = 0;
sprintf(buf, "????");
} else
sprintf(buf, "%04x", val);
if (addr == erraddr) {
verbose_printk("[%s]", buf);
err = val;
} else
verbose_printk(" %s ", buf);
/* Do any previous instructions turn on interrupts? */
if (addr <= erraddr && /* in the past */
((val >= 0x0040 && val <= 0x0047) || /* STI instruction */
val == 0x017b)) /* [SP++] = RETI */
sti = 1;
}
verbose_printk("\n");
/* Hardware error interrupts can be deferred */
if (unlikely(sti && (fp->seqstat & SEQSTAT_EXCAUSE) == VEC_HWERR &&
oops_in_progress)){
verbose_printk(KERN_NOTICE "Looks like this was a deferred error - sorry\n");
#ifndef CONFIG_DEBUG_HWERR
verbose_printk(KERN_NOTICE
"The remaining message may be meaningless\n"
"You should enable CONFIG_DEBUG_HWERR to get a better idea where it came from\n");
#else
/* If we are handling only one peripheral interrupt
* and current mm and pid are valid, and the last error
* was in that user space process's text area
* print it out - because that is where the problem exists
*/
if ((!(((fp)->ipend & ~0x30) & (((fp)->ipend & ~0x30) - 1))) &&
(current->pid && current->mm)) {
/* And the last RETI points to the current userspace context */
if ((fp + 1)->pc >= current->mm->start_code &&
(fp + 1)->pc <= current->mm->end_code) {
verbose_printk(KERN_NOTICE "It might be better to look around here :\n");
verbose_printk(KERN_NOTICE "-------------------------------------------\n");
show_regs(fp + 1);
verbose_printk(KERN_NOTICE "-------------------------------------------\n");
}
}
#endif
}
#endif
}
void show_regs(struct pt_regs *fp)
{
#ifdef CONFIG_DEBUG_VERBOSE
char buf [150];
struct irqaction *action;
unsigned int i;
unsigned long flags = 0;
unsigned int cpu = raw_smp_processor_id();
unsigned char in_atomic = (bfin_read_IPEND() & 0x10) || in_atomic();
verbose_printk(KERN_NOTICE "\n");
if (CPUID != bfin_cpuid())
verbose_printk(KERN_NOTICE "Compiled for cpu family 0x%04x (Rev %d), "
"but running on:0x%04x (Rev %d)\n",
CPUID, bfin_compiled_revid(), bfin_cpuid(), bfin_revid());
verbose_printk(KERN_NOTICE "ADSP-%s-0.%d",
CPU, bfin_compiled_revid());
if (bfin_compiled_revid() != bfin_revid())
verbose_printk("(Detected 0.%d)", bfin_revid());
verbose_printk(" %lu(MHz CCLK) %lu(MHz SCLK) (%s)\n",
get_cclk()/1000000, get_sclk()/1000000,
#ifdef CONFIG_MPU
"mpu on"
#else
"mpu off"
#endif
);
verbose_printk(KERN_NOTICE "%s", linux_banner);
verbose_printk(KERN_NOTICE "\nSEQUENCER STATUS:\t\t%s\n", print_tainted());
verbose_printk(KERN_NOTICE " SEQSTAT: %08lx IPEND: %04lx IMASK: %04lx SYSCFG: %04lx\n",
(long)fp->seqstat, fp->ipend, cpu_pda[raw_smp_processor_id()].ex_imask, fp->syscfg);
if (fp->ipend & EVT_IRPTEN)
verbose_printk(KERN_NOTICE " Global Interrupts Disabled (IPEND[4])\n");
if (!(cpu_pda[raw_smp_processor_id()].ex_imask & (EVT_IVG13 | EVT_IVG12 | EVT_IVG11 |
EVT_IVG10 | EVT_IVG9 | EVT_IVG8 | EVT_IVG7 | EVT_IVTMR)))
verbose_printk(KERN_NOTICE " Peripheral interrupts masked off\n");
if (!(cpu_pda[raw_smp_processor_id()].ex_imask & (EVT_IVG15 | EVT_IVG14)))
verbose_printk(KERN_NOTICE " Kernel interrupts masked off\n");
if ((fp->seqstat & SEQSTAT_EXCAUSE) == VEC_HWERR) {
verbose_printk(KERN_NOTICE " HWERRCAUSE: 0x%lx\n",
(fp->seqstat & SEQSTAT_HWERRCAUSE) >> 14);
#ifdef EBIU_ERRMST
/* If the error was from the EBIU, print it out */
if (bfin_read_EBIU_ERRMST() & CORE_ERROR) {
verbose_printk(KERN_NOTICE " EBIU Error Reason : 0x%04x\n",
bfin_read_EBIU_ERRMST());
verbose_printk(KERN_NOTICE " EBIU Error Address : 0x%08x\n",
bfin_read_EBIU_ERRADD());
}
#endif
{
dump_bfin_process(fp);
dump_bfin_mem(fp);
show_regs(fp);
dump_bfin_trace_buffer();
}
verbose_printk(KERN_NOTICE " EXCAUSE : 0x%lx\n",
fp->seqstat & SEQSTAT_EXCAUSE);
for (i = 2; i <= 15 ; i++) {
if (fp->ipend & (1 << i)) {
if (i != 4) {
decode_address(buf, bfin_read32(EVT0 + 4*i));
verbose_printk(KERN_NOTICE " physical IVG%i asserted : %s\n", i, buf);
} else
verbose_printk(KERN_NOTICE " interrupts disabled\n");
}
}
/* if no interrupts are going off, don't print this out */
if (fp->ipend & ~0x3F) {
for (i = 0; i < (NR_IRQS - 1); i++) {
if (!in_atomic)
raw_spin_lock_irqsave(&irq_desc[i].lock, flags);
action = irq_desc[i].action;
if (!action)
goto unlock;
decode_address(buf, (unsigned int)action->handler);
verbose_printk(KERN_NOTICE " logical irq %3d mapped : %s", i, buf);
for (action = action->next; action; action = action->next) {
decode_address(buf, (unsigned int)action->handler);
verbose_printk(", %s", buf);
}
verbose_printk("\n");
unlock:
if (!in_atomic)
raw_spin_unlock_irqrestore(&irq_desc[i].lock, flags);
}
}
decode_address(buf, fp->rete);
verbose_printk(KERN_NOTICE " RETE: %s\n", buf);
decode_address(buf, fp->retn);
verbose_printk(KERN_NOTICE " RETN: %s\n", buf);
decode_address(buf, fp->retx);
verbose_printk(KERN_NOTICE " RETX: %s\n", buf);
decode_address(buf, fp->rets);
verbose_printk(KERN_NOTICE " RETS: %s\n", buf);
decode_address(buf, fp->pc);
verbose_printk(KERN_NOTICE " PC : %s\n", buf);
if (((long)fp->seqstat & SEQSTAT_EXCAUSE) &&
(((long)fp->seqstat & SEQSTAT_EXCAUSE) != VEC_HWERR)) {
decode_address(buf, cpu_pda[cpu].dcplb_fault_addr);
verbose_printk(KERN_NOTICE "DCPLB_FAULT_ADDR: %s\n", buf);
decode_address(buf, cpu_pda[cpu].icplb_fault_addr);
verbose_printk(KERN_NOTICE "ICPLB_FAULT_ADDR: %s\n", buf);
}
verbose_printk(KERN_NOTICE "PROCESSOR STATE:\n");
verbose_printk(KERN_NOTICE " R0 : %08lx R1 : %08lx R2 : %08lx R3 : %08lx\n",
fp->r0, fp->r1, fp->r2, fp->r3);
verbose_printk(KERN_NOTICE " R4 : %08lx R5 : %08lx R6 : %08lx R7 : %08lx\n",
fp->r4, fp->r5, fp->r6, fp->r7);
verbose_printk(KERN_NOTICE " P0 : %08lx P1 : %08lx P2 : %08lx P3 : %08lx\n",
fp->p0, fp->p1, fp->p2, fp->p3);
verbose_printk(KERN_NOTICE " P4 : %08lx P5 : %08lx FP : %08lx SP : %08lx\n",
fp->p4, fp->p5, fp->fp, (long)fp);
verbose_printk(KERN_NOTICE " LB0: %08lx LT0: %08lx LC0: %08lx\n",
fp->lb0, fp->lt0, fp->lc0);
verbose_printk(KERN_NOTICE " LB1: %08lx LT1: %08lx LC1: %08lx\n",
fp->lb1, fp->lt1, fp->lc1);
verbose_printk(KERN_NOTICE " B0 : %08lx L0 : %08lx M0 : %08lx I0 : %08lx\n",
fp->b0, fp->l0, fp->m0, fp->i0);
verbose_printk(KERN_NOTICE " B1 : %08lx L1 : %08lx M1 : %08lx I1 : %08lx\n",
fp->b1, fp->l1, fp->m1, fp->i1);
verbose_printk(KERN_NOTICE " B2 : %08lx L2 : %08lx M2 : %08lx I2 : %08lx\n",
fp->b2, fp->l2, fp->m2, fp->i2);
verbose_printk(KERN_NOTICE " B3 : %08lx L3 : %08lx M3 : %08lx I3 : %08lx\n",
fp->b3, fp->l3, fp->m3, fp->i3);
verbose_printk(KERN_NOTICE "A0.w: %08lx A0.x: %08lx A1.w: %08lx A1.x: %08lx\n",
fp->a0w, fp->a0x, fp->a1w, fp->a1x);
verbose_printk(KERN_NOTICE "USP : %08lx ASTAT: %08lx\n",
rdusp(), fp->astat);
verbose_printk(KERN_NOTICE "\n");
#endif
}
#ifdef CONFIG_SYS_BFIN_SPINLOCK_L1
asmlinkage int sys_bfin_spinlock(int *spinlock)__attribute__((l1_text));
#endif
static DEFINE_SPINLOCK(bfin_spinlock_lock);
asmlinkage int sys_bfin_spinlock(int *p)
{
int ret, tmp = 0;
spin_lock(&bfin_spinlock_lock); /* This would also hold kernel preemption. */
ret = get_user(tmp, p);
if (likely(ret == 0)) {
if (unlikely(tmp))
ret = 1;
else
put_user(1, p);
}
spin_unlock(&bfin_spinlock_lock);
return ret;
}
int bfin_request_exception(unsigned int exception, void (*handler)(void))
{
void (*curr_handler)(void);
if (exception > 0x3F)
return -EINVAL;
curr_handler = ex_table[exception];
if (curr_handler != ex_replaceable)
return -EBUSY;
ex_table[exception] = handler;
panic("Double Fault - unrecoverable event");
return 0;
}
EXPORT_SYMBOL(bfin_request_exception);
int bfin_free_exception(unsigned int exception, void (*handler)(void))
{
void (*curr_handler)(void);
if (exception > 0x3F)
return -EINVAL;
curr_handler = ex_table[exception];
if (curr_handler != handler)
return -EBUSY;
ex_table[exception] = ex_replaceable;
return 0;
}
EXPORT_SYMBOL(bfin_free_exception);
void panic_cplb_error(int cplb_panic, struct pt_regs *fp)
{
......@@ -1349,3 +559,23 @@ void panic_cplb_error(int cplb_panic, struct pt_regs *fp)
dump_stack();
panic("Unrecoverable event");
}
#ifdef CONFIG_BUG
int is_valid_bugaddr(unsigned long addr)
{
unsigned int opcode;
if (!get_instruction(&opcode, (unsigned short *)addr))
return 0;
return opcode == BFIN_BUG_OPCODE;
}
#endif
/* stub this out */
#ifndef CONFIG_DEBUG_VERBOSE
void show_regs(struct pt_regs *fp)
{
}
#endif
arch/blackfin/lib/memset.S
View file @ 064e297c
......@@ -20,6 +20,7 @@
* R1 = filler byte
* R2 = count
* Favours word aligned data.
* The strncpy assumes that I0 and I1 are not used in this function
*/
ENTRY(_memset)
......
arch/blackfin/lib/strcmp.S 0 → 100644
View file @ 064e297c
/*
* Copyright 2005-2010 Analog Devices Inc.
*
* Licensed under the ADI BSD license or the GPL-2 (or later)
*/
#include <linux/linkage.h>
/* void *strcmp(char *s1, const char *s2);
* R0 = address (s1)
* R1 = address (s2)
*
* Returns an integer less than, equal to, or greater than zero if s1
* (or the first n bytes thereof) is found, respectively, to be less
* than, to match, or be greater than s2.
*/
#ifdef CONFIG_STRCMP_L1
.section .l1.text
#else
.text
#endif
.align 2
ENTRY(_strcmp)
P0 = R0 ; /* s1 */
P1 = R1 ; /* s2 */
1:
R0 = B[P0++] (Z); /* get *s1 */
R1 = B[P1++] (Z); /* get *s2 */
CC = R0 == R1; /* compare a byte */
if ! cc jump 2f; /* not equal, break out */
CC = R0; /* at end of s1? */
if cc jump 1b (bp); /* no, keep going */
jump.s 3f; /* strings are equal */
2:
R0 = R0 - R1; /* *s1 - *s2 */
3:
RTS;
ENDPROC(_strcmp)
arch/blackfin/lib/strcmp.c deleted 100644 → 0
View file @ f1377118
/*
* Provide symbol in case str func is not inlined.
*
* Copyright (c) 2006-2007 Analog Devices Inc.
*
* Licensed under the GPL-2 or later.
*/
#define strcmp __inline_strcmp
#include <asm/string.h>
#undef strcmp
#include <linux/module.h>
int strcmp(const char *dest, const char *src)
{
return __inline_strcmp(dest, src);
}
EXPORT_SYMBOL(strcmp);
arch/blackfin/lib/strcpy.S 0 → 100644
View file @ 064e297c
/*
* Copyright 2005-2010 Analog Devices Inc.
*
* Licensed under the ADI BSD license or the GPL-2 (or later)
*/
#include <linux/linkage.h>
/* void *strcpy(char *dest, const char *src);
* R0 = address (dest)
* R1 = address (src)
*
* Returns a pointer to the destination string dest
*/
#ifdef CONFIG_STRCPY_L1
.section .l1.text
#else
.text
#endif
.align 2
ENTRY(_strcpy)
P0 = R0 ; /* dst*/
P1 = R1 ; /* src*/
1:
R1 = B [P1++] (Z);
B [P0++] = R1;
CC = R1;
if cc jump 1b (bp);
RTS;
ENDPROC(_strcpy)
arch/blackfin/lib/strcpy.c deleted 100644 → 0
View file @ f1377118
/*
* Provide symbol in case str func is not inlined.
*
* Copyright (c) 2006-2007 Analog Devices Inc.
*
* Licensed under the GPL-2 or later.
*/
#define strcpy __inline_strcpy
#include <asm/string.h>
#undef strcpy
#include <linux/module.h>
char *strcpy(char *dest, const char *src)
{
return __inline_strcpy(dest, src);
}
EXPORT_SYMBOL(strcpy);
arch/blackfin/lib/strncmp.S 0 → 100644
View file @ 064e297c
/*
* Copyright 2005-2010 Analog Devices Inc.
*
* Licensed under the ADI BSD license or the GPL-2 (or later)
*/
#include <linux/linkage.h>
/* void *strncpy(char *s1, const char *s2, size_t n);
* R0 = address (dest)
* R1 = address (src)
* R2 = size (n)
* Returns a pointer to the destination string dest
*/
#ifdef CONFIG_STRNCMP_L1
.section .l1.text
#else
.text
#endif
.align 2
ENTRY(_strncmp)
CC = R2 == 0;
if CC JUMP 5f;
P0 = R0 ; /* s1 */
P1 = R1 ; /* s2 */
1:
R0 = B[P0++] (Z); /* get *s1 */
R1 = B[P1++] (Z); /* get *s2 */
CC = R0 == R1; /* compare a byte */
if ! cc jump 3f; /* not equal, break out */
CC = R0; /* at end of s1? */
if ! cc jump 4f; /* yes, all done */
R2 += -1; /* no, adjust count */
CC = R2 == 0;
if ! cc jump 1b (bp); /* more to do, keep going */
2:
R0 = 0; /* strings are equal */
jump.s 4f;
3:
R0 = R0 - R1; /* *s1 - *s2 */
4:
RTS;
5:
R0 = 0;
RTS;
ENDPROC(_strncmp)
arch/blackfin/lib/strncmp.c deleted 100644 → 0
View file @ f1377118
/*
* Provide symbol in case str func is not inlined.
*
* Copyright (c) 2006-2007 Analog Devices Inc.
*
* Licensed under the GPL-2 or later.
*/
#define strncmp __inline_strncmp
#include <asm/string.h>
#include <linux/module.h>
#undef strncmp
int strncmp(const char *cs, const char *ct, size_t count)
{
return __inline_strncmp(cs, ct, count);
}
EXPORT_SYMBOL(strncmp);
arch/blackfin/lib/strncpy.S 0 → 100644
View file @ 064e297c
/*
* Copyright 2005-2010 Analog Devices Inc.
*
* Licensed under the ADI BSD license or the GPL-2 (or later)
*/
#include <linux/linkage.h>
#include <asm/context.S>
/* void *strncpy(char *dest, const char *src, size_t n);
* R0 = address (dest)
* R1 = address (src)
* R2 = size
* Returns a pointer (R0) to the destination string dest
* we do this by not changing R0
*/
#ifdef CONFIG_STRNCPY_L1
.section .l1.text
#else
.text
#endif
.align 2
ENTRY(_strncpy)
CC = R2 == 0;
if CC JUMP 4f;
P2 = R2 ; /* size */
P0 = R0 ; /* dst*/
P1 = R1 ; /* src*/
LSETUP (1f, 2f) LC0 = P2;
1:
R1 = B [P1++] (Z);
B [P0++] = R1;
CC = R1 == 0;
2:
if CC jump 3f;
RTS;
/* if src is shorter than n, we need to null pad bytes in dest
* but, we can get here when the last byte is zero, and we don't
* want to copy an extra byte at the end, so we need to check
*/
3:
R2 = LC0;
CC = R2
if ! CC jump 6f;
/* if the required null padded portion is small, do it here, rather than
* handling the overhead of memset (which is OK when things are big).
*/
R3 = 0x20;
CC = R2 < R3;
IF CC jump 4f;
R2 += -1;
/* Set things up for memset
* R0 = address
* R1 = filler byte (this case it's zero, set above)
* R2 = count (set above)
*/
I1 = R0;
R0 = RETS;
I0 = R0;
R0 = P0;
pseudo_long_call _memset, p0;
R0 = I0;
RETS = R0;
R0 = I1;
RTS;
4:
LSETUP(5f, 5f) LC0;
5:
B [P0++] = R1;
6:
RTS;
ENDPROC(_strncpy)
arch/blackfin/lib/strncpy.c deleted 100644 → 0
View file @ f1377118
/*
* Provide symbol in case str func is not inlined.
*
* Copyright (c) 2006-2007 Analog Devices Inc.
*
* Licensed under the GPL-2 or later.
*/
#define strncpy __inline_strncpy
#include <asm/string.h>
#undef strncpy
#include <linux/module.h>
char *strncpy(char *dest, const char *src, size_t n)
{
return __inline_strncpy(dest, src, n);
}
EXPORT_SYMBOL(strncpy);
arch/blackfin/mach-bf527/boards/cm_bf527.c
View file @ 064e297c
......@@ -98,6 +98,10 @@ static struct musb_hdrc_config musb_config = {
.num_eps = 8,
.dma_channels = 8,
.gpio_vrsel = GPIO_PF11,
/* Some custom boards need to be active low, just set it to "0"
* if it is the case.
*/
.gpio_vrsel_active = 1,
};
static struct musb_hdrc_platform_data musb_plat = {
......
arch/blackfin/mach-bf527/boards/ezbrd.c
View file @ 064e297c
......@@ -62,6 +62,10 @@ static struct musb_hdrc_config musb_config = {
.num_eps = 8,
.dma_channels = 8,
.gpio_vrsel = GPIO_PG13,
/* Some custom boards need to be active low, just set it to "0"
* if it is the case.
*/
.gpio_vrsel_active = 1,
};
static struct musb_hdrc_platform_data musb_plat = {
......
arch/blackfin/mach-bf527/boards/ezkit.c
View file @ 064e297c
......@@ -102,6 +102,10 @@ static struct musb_hdrc_config musb_config = {
.num_eps = 8,
.dma_channels = 8,
.gpio_vrsel = GPIO_PG13,
/* Some custom boards need to be active low, just set it to "0"
* if it is the case.
*/
.gpio_vrsel_active = 1,
};
static struct musb_hdrc_platform_data musb_plat = {
......
arch/blackfin/mach-bf537/boards/minotaur.c
View file @ 064e297c
......@@ -23,12 +23,13 @@
#include <asm/dma.h>
#include <asm/bfin5xx_spi.h>
#include <asm/reboot.h>
#include <asm/portmux.h>
#include <linux/spi/ad7877.h>
/*
* Name the Board for the /proc/cpuinfo
*/
char *bfin_board_name = "CamSig Minotaur BF537";
const char bfin_board_name[] = "CamSig Minotaur BF537";
#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
static struct resource bfin_pcmcia_cf_resources[] = {
......
arch/blackfin/mach-bf537/include/mach/defBF534.h
View file @ 064e297c
......@@ -1702,628 +1702,6 @@
#define RCV_HALF 0x0004 /* Receive FIFO Has 1 Byte To Read */
#define RCV_FULL 0x000C /* Receive FIFO Full (2 Bytes To Read) */
/* ************ CONTROLLER AREA NETWORK (CAN) MASKS ***************/
/* CAN_CONTROL Masks */
#define SRS 0x0001 /* Software Reset */
#define DNM 0x0002 /* Device Net Mode */
#define ABO 0x0004 /* Auto-Bus On Enable */
#define TXPRIO 0x0008 /* TX Priority (Priority/Mailbox*) */
#define WBA 0x0010 /* Wake-Up On CAN Bus Activity Enable */
#define SMR 0x0020 /* Sleep Mode Request */
#define CSR 0x0040 /* CAN Suspend Mode Request */
#define CCR 0x0080 /* CAN Configuration Mode Request */
/* CAN_STATUS Masks */
#define WT 0x0001 /* TX Warning Flag */
#define WR 0x0002 /* RX Warning Flag */
#define EP 0x0004 /* Error Passive Mode */
#define EBO 0x0008 /* Error Bus Off Mode */
#define SMA 0x0020 /* Sleep Mode Acknowledge */
#define CSA 0x0040 /* Suspend Mode Acknowledge */
#define CCA 0x0080 /* Configuration Mode Acknowledge */
#define MBPTR 0x1F00 /* Mailbox Pointer */
#define TRM 0x4000 /* Transmit Mode */
#define REC 0x8000 /* Receive Mode */
/* CAN_CLOCK Masks */
#define BRP 0x03FF /* Bit-Rate Pre-Scaler */
/* CAN_TIMING Masks */
#define TSEG1 0x000F /* Time Segment 1 */
#define TSEG2 0x0070 /* Time Segment 2 */
#define SAM 0x0080 /* Sampling */
#define SJW 0x0300 /* Synchronization Jump Width */
/* CAN_DEBUG Masks */
#define DEC 0x0001 /* Disable CAN Error Counters */
#define DRI 0x0002 /* Disable CAN RX Input */
#define DTO 0x0004 /* Disable CAN TX Output */
#define DIL 0x0008 /* Disable CAN Internal Loop */
#define MAA 0x0010 /* Mode Auto-Acknowledge Enable */
#define MRB 0x0020 /* Mode Read Back Enable */
#define CDE 0x8000 /* CAN Debug Enable */
/* CAN_CEC Masks */
#define RXECNT 0x00FF /* Receive Error Counter */
#define TXECNT 0xFF00 /* Transmit Error Counter */
/* CAN_INTR Masks */
#define MBRIRQ 0x0001 /* Mailbox Receive Interrupt */
#define MBRIF MBRIRQ /* legacy */
#define MBTIRQ 0x0002 /* Mailbox Transmit Interrupt */
#define MBTIF MBTIRQ /* legacy */
#define GIRQ 0x0004 /* Global Interrupt */
#define SMACK 0x0008 /* Sleep Mode Acknowledge */
#define CANTX 0x0040 /* CAN TX Bus Value */
#define CANRX 0x0080 /* CAN RX Bus Value */
/* CAN_MBxx_ID1 and CAN_MBxx_ID0 Masks */
#define DFC 0xFFFF /* Data Filtering Code (If Enabled) (ID0) */
#define EXTID_LO 0xFFFF /* Lower 16 Bits of Extended Identifier (ID0) */
#define EXTID_HI 0x0003 /* Upper 2 Bits of Extended Identifier (ID1) */
#define BASEID 0x1FFC /* Base Identifier */
#define IDE 0x2000 /* Identifier Extension */
#define RTR 0x4000 /* Remote Frame Transmission Request */
#define AME 0x8000 /* Acceptance Mask Enable */
/* CAN_MBxx_TIMESTAMP Masks */
#define TSV 0xFFFF /* Timestamp */
/* CAN_MBxx_LENGTH Masks */
#define DLC 0x000F /* Data Length Code */
/* CAN_AMxxH and CAN_AMxxL Masks */
#define DFM 0xFFFF /* Data Field Mask (If Enabled) (CAN_AMxxL) */
#define EXTID_LO 0xFFFF /* Lower 16 Bits of Extended Identifier (CAN_AMxxL) */
#define EXTID_HI 0x0003 /* Upper 2 Bits of Extended Identifier (CAN_AMxxH) */
#define BASEID 0x1FFC /* Base Identifier */
#define AMIDE 0x2000 /* Acceptance Mask ID Extension Enable */
#define FMD 0x4000 /* Full Mask Data Field Enable */
#define FDF 0x8000 /* Filter On Data Field Enable */
/* CAN_MC1 Masks */
#define MC0 0x0001 /* Enable Mailbox 0 */
#define MC1 0x0002 /* Enable Mailbox 1 */
#define MC2 0x0004 /* Enable Mailbox 2 */
#define MC3 0x0008 /* Enable Mailbox 3 */
#define MC4 0x0010 /* Enable Mailbox 4 */
#define MC5 0x0020 /* Enable Mailbox 5 */
#define MC6 0x0040 /* Enable Mailbox 6 */
#define MC7 0x0080 /* Enable Mailbox 7 */
#define MC8 0x0100 /* Enable Mailbox 8 */
#define MC9 0x0200 /* Enable Mailbox 9 */
#define MC10 0x0400 /* Enable Mailbox 10 */
#define MC11 0x0800 /* Enable Mailbox 11 */
#define MC12 0x1000 /* Enable Mailbox 12 */
#define MC13 0x2000 /* Enable Mailbox 13 */
#define MC14 0x4000 /* Enable Mailbox 14 */
#define MC15 0x8000 /* Enable Mailbox 15 */
/* CAN_MC2 Masks */
#define MC16 0x0001 /* Enable Mailbox 16 */
#define MC17 0x0002 /* Enable Mailbox 17 */
#define MC18 0x0004 /* Enable Mailbox 18 */
#define MC19 0x0008 /* Enable Mailbox 19 */
#define MC20 0x0010 /* Enable Mailbox 20 */
#define MC21 0x0020 /* Enable Mailbox 21 */
#define MC22 0x0040 /* Enable Mailbox 22 */
#define MC23 0x0080 /* Enable Mailbox 23 */
#define MC24 0x0100 /* Enable Mailbox 24 */
#define MC25 0x0200 /* Enable Mailbox 25 */
#define MC26 0x0400 /* Enable Mailbox 26 */
#define MC27 0x0800 /* Enable Mailbox 27 */
#define MC28 0x1000 /* Enable Mailbox 28 */
#define MC29 0x2000 /* Enable Mailbox 29 */
#define MC30 0x4000 /* Enable Mailbox 30 */
#define MC31 0x8000 /* Enable Mailbox 31 */
/* CAN_MD1 Masks */
#define MD0 0x0001 /* Enable Mailbox 0 For Receive */
#define MD1 0x0002 /* Enable Mailbox 1 For Receive */
#define MD2 0x0004 /* Enable Mailbox 2 For Receive */
#define MD3 0x0008 /* Enable Mailbox 3 For Receive */
#define MD4 0x0010 /* Enable Mailbox 4 For Receive */
#define MD5 0x0020 /* Enable Mailbox 5 For Receive */
#define MD6 0x0040 /* Enable Mailbox 6 For Receive */
#define MD7 0x0080 /* Enable Mailbox 7 For Receive */
#define MD8 0x0100 /* Enable Mailbox 8 For Receive */
#define MD9 0x0200 /* Enable Mailbox 9 For Receive */
#define MD10 0x0400 /* Enable Mailbox 10 For Receive */
#define MD11 0x0800 /* Enable Mailbox 11 For Receive */
#define MD12 0x1000 /* Enable Mailbox 12 For Receive */
#define MD13 0x2000 /* Enable Mailbox 13 For Receive */
#define MD14 0x4000 /* Enable Mailbox 14 For Receive */
#define MD15 0x8000 /* Enable Mailbox 15 For Receive */
/* CAN_MD2 Masks */
#define MD16 0x0001 /* Enable Mailbox 16 For Receive */
#define MD17 0x0002 /* Enable Mailbox 17 For Receive */
#define MD18 0x0004 /* Enable Mailbox 18 For Receive */
#define MD19 0x0008 /* Enable Mailbox 19 For Receive */
#define MD20 0x0010 /* Enable Mailbox 20 For Receive */
#define MD21 0x0020 /* Enable Mailbox 21 For Receive */
#define MD22 0x0040 /* Enable Mailbox 22 For Receive */
#define MD23 0x0080 /* Enable Mailbox 23 For Receive */
#define MD24 0x0100 /* Enable Mailbox 24 For Receive */
#define MD25 0x0200 /* Enable Mailbox 25 For Receive */
#define MD26 0x0400 /* Enable Mailbox 26 For Receive */
#define MD27 0x0800 /* Enable Mailbox 27 For Receive */
#define MD28 0x1000 /* Enable Mailbox 28 For Receive */
#define MD29 0x2000 /* Enable Mailbox 29 For Receive */
#define MD30 0x4000 /* Enable Mailbox 30 For Receive */
#define MD31 0x8000 /* Enable Mailbox 31 For Receive */
/* CAN_RMP1 Masks */
#define RMP0 0x0001 /* RX Message Pending In Mailbox 0 */
#define RMP1 0x0002 /* RX Message Pending In Mailbox 1 */
#define RMP2 0x0004 /* RX Message Pending In Mailbox 2 */
#define RMP3 0x0008 /* RX Message Pending In Mailbox 3 */
#define RMP4 0x0010 /* RX Message Pending In Mailbox 4 */
#define RMP5 0x0020 /* RX Message Pending In Mailbox 5 */
#define RMP6 0x0040 /* RX Message Pending In Mailbox 6 */
#define RMP7 0x0080 /* RX Message Pending In Mailbox 7 */
#define RMP8 0x0100 /* RX Message Pending In Mailbox 8 */
#define RMP9 0x0200 /* RX Message Pending In Mailbox 9 */
#define RMP10 0x0400 /* RX Message Pending In Mailbox 10 */
#define RMP11 0x0800 /* RX Message Pending In Mailbox 11 */
#define RMP12 0x1000 /* RX Message Pending In Mailbox 12 */
#define RMP13 0x2000 /* RX Message Pending In Mailbox 13 */
#define RMP14 0x4000 /* RX Message Pending In Mailbox 14 */
#define RMP15 0x8000 /* RX Message Pending In Mailbox 15 */
/* CAN_RMP2 Masks */
#define RMP16 0x0001 /* RX Message Pending In Mailbox 16 */
#define RMP17 0x0002 /* RX Message Pending In Mailbox 17 */
#define RMP18 0x0004 /* RX Message Pending In Mailbox 18 */
#define RMP19 0x0008 /* RX Message Pending In Mailbox 19 */
#define RMP20 0x0010 /* RX Message Pending In Mailbox 20 */
#define RMP21 0x0020 /* RX Message Pending In Mailbox 21 */
#define RMP22 0x0040 /* RX Message Pending In Mailbox 22 */
#define RMP23 0x0080 /* RX Message Pending In Mailbox 23 */
#define RMP24 0x0100 /* RX Message Pending In Mailbox 24 */
#define RMP25 0x0200 /* RX Message Pending In Mailbox 25 */
#define RMP26 0x0400 /* RX Message Pending In Mailbox 26 */
#define RMP27 0x0800 /* RX Message Pending In Mailbox 27 */
#define RMP28 0x1000 /* RX Message Pending In Mailbox 28 */
#define RMP29 0x2000 /* RX Message Pending In Mailbox 29 */
#define RMP30 0x4000 /* RX Message Pending In Mailbox 30 */
#define RMP31 0x8000 /* RX Message Pending In Mailbox 31 */
/* CAN_RML1 Masks */
#define RML0 0x0001 /* RX Message Lost In Mailbox 0 */
#define RML1 0x0002 /* RX Message Lost In Mailbox 1 */
#define RML2 0x0004 /* RX Message Lost In Mailbox 2 */
#define RML3 0x0008 /* RX Message Lost In Mailbox 3 */
#define RML4 0x0010 /* RX Message Lost In Mailbox 4 */
#define RML5 0x0020 /* RX Message Lost In Mailbox 5 */
#define RML6 0x0040 /* RX Message Lost In Mailbox 6 */
#define RML7 0x0080 /* RX Message Lost In Mailbox 7 */
#define RML8 0x0100 /* RX Message Lost In Mailbox 8 */
#define RML9 0x0200 /* RX Message Lost In Mailbox 9 */
#define RML10 0x0400 /* RX Message Lost In Mailbox 10 */
#define RML11 0x0800 /* RX Message Lost In Mailbox 11 */
#define RML12 0x1000 /* RX Message Lost In Mailbox 12 */
#define RML13 0x2000 /* RX Message Lost In Mailbox 13 */
#define RML14 0x4000 /* RX Message Lost In Mailbox 14 */
#define RML15 0x8000 /* RX Message Lost In Mailbox 15 */
/* CAN_RML2 Masks */
#define RML16 0x0001 /* RX Message Lost In Mailbox 16 */
#define RML17 0x0002 /* RX Message Lost In Mailbox 17 */
#define RML18 0x0004 /* RX Message Lost In Mailbox 18 */
#define RML19 0x0008 /* RX Message Lost In Mailbox 19 */
#define RML20 0x0010 /* RX Message Lost In Mailbox 20 */
#define RML21 0x0020 /* RX Message Lost In Mailbox 21 */
#define RML22 0x0040 /* RX Message Lost In Mailbox 22 */
#define RML23 0x0080 /* RX Message Lost In Mailbox 23 */
#define RML24 0x0100 /* RX Message Lost In Mailbox 24 */
#define RML25 0x0200 /* RX Message Lost In Mailbox 25 */
#define RML26 0x0400 /* RX Message Lost In Mailbox 26 */
#define RML27 0x0800 /* RX Message Lost In Mailbox 27 */
#define RML28 0x1000 /* RX Message Lost In Mailbox 28 */
#define RML29 0x2000 /* RX Message Lost In Mailbox 29 */
#define RML30 0x4000 /* RX Message Lost In Mailbox 30 */
#define RML31 0x8000 /* RX Message Lost In Mailbox 31 */
/* CAN_OPSS1 Masks */
#define OPSS0 0x0001 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 0 */
#define OPSS1 0x0002 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 1 */
#define OPSS2 0x0004 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 2 */
#define OPSS3 0x0008 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 3 */
#define OPSS4 0x0010 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 4 */
#define OPSS5 0x0020 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 5 */
#define OPSS6 0x0040 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 6 */
#define OPSS7 0x0080 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 7 */
#define OPSS8 0x0100 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 8 */
#define OPSS9 0x0200 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 9 */
#define OPSS10 0x0400 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 10 */
#define OPSS11 0x0800 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 11 */
#define OPSS12 0x1000 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 12 */
#define OPSS13 0x2000 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 13 */
#define OPSS14 0x4000 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 14 */
#define OPSS15 0x8000 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 15 */
/* CAN_OPSS2 Masks */
#define OPSS16 0x0001 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 16 */
#define OPSS17 0x0002 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 17 */
#define OPSS18 0x0004 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 18 */
#define OPSS19 0x0008 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 19 */
#define OPSS20 0x0010 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 20 */
#define OPSS21 0x0020 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 21 */
#define OPSS22 0x0040 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 22 */
#define OPSS23 0x0080 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 23 */
#define OPSS24 0x0100 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 24 */
#define OPSS25 0x0200 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 25 */
#define OPSS26 0x0400 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 26 */
#define OPSS27 0x0800 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 27 */
#define OPSS28 0x1000 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 28 */
#define OPSS29 0x2000 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 29 */
#define OPSS30 0x4000 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 30 */
#define OPSS31 0x8000 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 31 */
/* CAN_TRR1 Masks */
#define TRR0 0x0001 /* Deny But Don't Lock Access To Mailbox 0 */
#define TRR1 0x0002 /* Deny But Don't Lock Access To Mailbox 1 */
#define TRR2 0x0004 /* Deny But Don't Lock Access To Mailbox 2 */
#define TRR3 0x0008 /* Deny But Don't Lock Access To Mailbox 3 */
#define TRR4 0x0010 /* Deny But Don't Lock Access To Mailbox 4 */
#define TRR5 0x0020 /* Deny But Don't Lock Access To Mailbox 5 */
#define TRR6 0x0040 /* Deny But Don't Lock Access To Mailbox 6 */
#define TRR7 0x0080 /* Deny But Don't Lock Access To Mailbox 7 */
#define TRR8 0x0100 /* Deny But Don't Lock Access To Mailbox 8 */
#define TRR9 0x0200 /* Deny But Don't Lock Access To Mailbox 9 */
#define TRR10 0x0400 /* Deny But Don't Lock Access To Mailbox 10 */
#define TRR11 0x0800 /* Deny But Don't Lock Access To Mailbox 11 */
#define TRR12 0x1000 /* Deny But Don't Lock Access To Mailbox 12 */
#define TRR13 0x2000 /* Deny But Don't Lock Access To Mailbox 13 */
#define TRR14 0x4000 /* Deny But Don't Lock Access To Mailbox 14 */
#define TRR15 0x8000 /* Deny But Don't Lock Access To Mailbox 15 */
/* CAN_TRR2 Masks */
#define TRR16 0x0001 /* Deny But Don't Lock Access To Mailbox 16 */
#define TRR17 0x0002 /* Deny But Don't Lock Access To Mailbox 17 */
#define TRR18 0x0004 /* Deny But Don't Lock Access To Mailbox 18 */
#define TRR19 0x0008 /* Deny But Don't Lock Access To Mailbox 19 */
#define TRR20 0x0010 /* Deny But Don't Lock Access To Mailbox 20 */
#define TRR21 0x0020 /* Deny But Don't Lock Access To Mailbox 21 */
#define TRR22 0x0040 /* Deny But Don't Lock Access To Mailbox 22 */
#define TRR23 0x0080 /* Deny But Don't Lock Access To Mailbox 23 */
#define TRR24 0x0100 /* Deny But Don't Lock Access To Mailbox 24 */
#define TRR25 0x0200 /* Deny But Don't Lock Access To Mailbox 25 */
#define TRR26 0x0400 /* Deny But Don't Lock Access To Mailbox 26 */
#define TRR27 0x0800 /* Deny But Don't Lock Access To Mailbox 27 */
#define TRR28 0x1000 /* Deny But Don't Lock Access To Mailbox 28 */
#define TRR29 0x2000 /* Deny But Don't Lock Access To Mailbox 29 */
#define TRR30 0x4000 /* Deny But Don't Lock Access To Mailbox 30 */
#define TRR31 0x8000 /* Deny But Don't Lock Access To Mailbox 31 */
/* CAN_TRS1 Masks */
#define TRS0 0x0001 /* Remote Frame Request For Mailbox 0 */
#define TRS1 0x0002 /* Remote Frame Request For Mailbox 1 */
#define TRS2 0x0004 /* Remote Frame Request For Mailbox 2 */
#define TRS3 0x0008 /* Remote Frame Request For Mailbox 3 */
#define TRS4 0x0010 /* Remote Frame Request For Mailbox 4 */
#define TRS5 0x0020 /* Remote Frame Request For Mailbox 5 */
#define TRS6 0x0040 /* Remote Frame Request For Mailbox 6 */
#define TRS7 0x0080 /* Remote Frame Request For Mailbox 7 */
#define TRS8 0x0100 /* Remote Frame Request For Mailbox 8 */
#define TRS9 0x0200 /* Remote Frame Request For Mailbox 9 */
#define TRS10 0x0400 /* Remote Frame Request For Mailbox 10 */
#define TRS11 0x0800 /* Remote Frame Request For Mailbox 11 */
#define TRS12 0x1000 /* Remote Frame Request For Mailbox 12 */
#define TRS13 0x2000 /* Remote Frame Request For Mailbox 13 */
#define TRS14 0x4000 /* Remote Frame Request For Mailbox 14 */
#define TRS15 0x8000 /* Remote Frame Request For Mailbox 15 */
/* CAN_TRS2 Masks */
#define TRS16 0x0001 /* Remote Frame Request For Mailbox 16 */
#define TRS17 0x0002 /* Remote Frame Request For Mailbox 17 */
#define TRS18 0x0004 /* Remote Frame Request For Mailbox 18 */
#define TRS19 0x0008 /* Remote Frame Request For Mailbox 19 */
#define TRS20 0x0010 /* Remote Frame Request For Mailbox 20 */
#define TRS21 0x0020 /* Remote Frame Request For Mailbox 21 */
#define TRS22 0x0040 /* Remote Frame Request For Mailbox 22 */
#define TRS23 0x0080 /* Remote Frame Request For Mailbox 23 */
#define TRS24 0x0100 /* Remote Frame Request For Mailbox 24 */
#define TRS25 0x0200 /* Remote Frame Request For Mailbox 25 */
#define TRS26 0x0400 /* Remote Frame Request For Mailbox 26 */
#define TRS27 0x0800 /* Remote Frame Request For Mailbox 27 */
#define TRS28 0x1000 /* Remote Frame Request For Mailbox 28 */
#define TRS29 0x2000 /* Remote Frame Request For Mailbox 29 */
#define TRS30 0x4000 /* Remote Frame Request For Mailbox 30 */
#define TRS31 0x8000 /* Remote Frame Request For Mailbox 31 */
/* CAN_AA1 Masks */
#define AA0 0x0001 /* Aborted Message In Mailbox 0 */
#define AA1 0x0002 /* Aborted Message In Mailbox 1 */
#define AA2 0x0004 /* Aborted Message In Mailbox 2 */
#define AA3 0x0008 /* Aborted Message In Mailbox 3 */
#define AA4 0x0010 /* Aborted Message In Mailbox 4 */
#define AA5 0x0020 /* Aborted Message In Mailbox 5 */
#define AA6 0x0040 /* Aborted Message In Mailbox 6 */
#define AA7 0x0080 /* Aborted Message In Mailbox 7 */
#define AA8 0x0100 /* Aborted Message In Mailbox 8 */
#define AA9 0x0200 /* Aborted Message In Mailbox 9 */
#define AA10 0x0400 /* Aborted Message In Mailbox 10 */
#define AA11 0x0800 /* Aborted Message In Mailbox 11 */
#define AA12 0x1000 /* Aborted Message In Mailbox 12 */
#define AA13 0x2000 /* Aborted Message In Mailbox 13 */
#define AA14 0x4000 /* Aborted Message In Mailbox 14 */
#define AA15 0x8000 /* Aborted Message In Mailbox 15 */
/* CAN_AA2 Masks */
#define AA16 0x0001 /* Aborted Message In Mailbox 16 */
#define AA17 0x0002 /* Aborted Message In Mailbox 17 */
#define AA18 0x0004 /* Aborted Message In Mailbox 18 */
#define AA19 0x0008 /* Aborted Message In Mailbox 19 */
#define AA20 0x0010 /* Aborted Message In Mailbox 20 */
#define AA21 0x0020 /* Aborted Message In Mailbox 21 */
#define AA22 0x0040 /* Aborted Message In Mailbox 22 */
#define AA23 0x0080 /* Aborted Message In Mailbox 23 */
#define AA24 0x0100 /* Aborted Message In Mailbox 24 */
#define AA25 0x0200 /* Aborted Message In Mailbox 25 */
#define AA26 0x0400 /* Aborted Message In Mailbox 26 */
#define AA27 0x0800 /* Aborted Message In Mailbox 27 */
#define AA28 0x1000 /* Aborted Message In Mailbox 28 */
#define AA29 0x2000 /* Aborted Message In Mailbox 29 */
#define AA30 0x4000 /* Aborted Message In Mailbox 30 */
#define AA31 0x8000 /* Aborted Message In Mailbox 31 */
/* CAN_TA1 Masks */
#define TA0 0x0001 /* Transmit Successful From Mailbox 0 */
#define TA1 0x0002 /* Transmit Successful From Mailbox 1 */
#define TA2 0x0004 /* Transmit Successful From Mailbox 2 */
#define TA3 0x0008 /* Transmit Successful From Mailbox 3 */
#define TA4 0x0010 /* Transmit Successful From Mailbox 4 */
#define TA5 0x0020 /* Transmit Successful From Mailbox 5 */
#define TA6 0x0040 /* Transmit Successful From Mailbox 6 */
#define TA7 0x0080 /* Transmit Successful From Mailbox 7 */
#define TA8 0x0100 /* Transmit Successful From Mailbox 8 */
#define TA9 0x0200 /* Transmit Successful From Mailbox 9 */
#define TA10 0x0400 /* Transmit Successful From Mailbox 10 */
#define TA11 0x0800 /* Transmit Successful From Mailbox 11 */
#define TA12 0x1000 /* Transmit Successful From Mailbox 12 */
#define TA13 0x2000 /* Transmit Successful From Mailbox 13 */
#define TA14 0x4000 /* Transmit Successful From Mailbox 14 */
#define TA15 0x8000 /* Transmit Successful From Mailbox 15 */
/* CAN_TA2 Masks */
#define TA16 0x0001 /* Transmit Successful From Mailbox 16 */
#define TA17 0x0002 /* Transmit Successful From Mailbox 17 */
#define TA18 0x0004 /* Transmit Successful From Mailbox 18 */
#define TA19 0x0008 /* Transmit Successful From Mailbox 19 */
#define TA20 0x0010 /* Transmit Successful From Mailbox 20 */
#define TA21 0x0020 /* Transmit Successful From Mailbox 21 */
#define TA22 0x0040 /* Transmit Successful From Mailbox 22 */
#define TA23 0x0080 /* Transmit Successful From Mailbox 23 */
#define TA24 0x0100 /* Transmit Successful From Mailbox 24 */
#define TA25 0x0200 /* Transmit Successful From Mailbox 25 */
#define TA26 0x0400 /* Transmit Successful From Mailbox 26 */
#define TA27 0x0800 /* Transmit Successful From Mailbox 27 */
#define TA28 0x1000 /* Transmit Successful From Mailbox 28 */
#define TA29 0x2000 /* Transmit Successful From Mailbox 29 */
#define TA30 0x4000 /* Transmit Successful From Mailbox 30 */
#define TA31 0x8000 /* Transmit Successful From Mailbox 31 */
/* CAN_MBTD Masks */
#define TDPTR 0x001F /* Mailbox To Temporarily Disable */
#define TDA 0x0040 /* Temporary Disable Acknowledge */
#define TDR 0x0080 /* Temporary Disable Request */
/* CAN_RFH1 Masks */
#define RFH0 0x0001 /* Enable Automatic Remote Frame Handling For Mailbox 0 */
#define RFH1 0x0002 /* Enable Automatic Remote Frame Handling For Mailbox 1 */
#define RFH2 0x0004 /* Enable Automatic Remote Frame Handling For Mailbox 2 */
#define RFH3 0x0008 /* Enable Automatic Remote Frame Handling For Mailbox 3 */
#define RFH4 0x0010 /* Enable Automatic Remote Frame Handling For Mailbox 4 */
#define RFH5 0x0020 /* Enable Automatic Remote Frame Handling For Mailbox 5 */
#define RFH6 0x0040 /* Enable Automatic Remote Frame Handling For Mailbox 6 */
#define RFH7 0x0080 /* Enable Automatic Remote Frame Handling For Mailbox 7 */
#define RFH8 0x0100 /* Enable Automatic Remote Frame Handling For Mailbox 8 */
#define RFH9 0x0200 /* Enable Automatic Remote Frame Handling For Mailbox 9 */
#define RFH10 0x0400 /* Enable Automatic Remote Frame Handling For Mailbox 10 */
#define RFH11 0x0800 /* Enable Automatic Remote Frame Handling For Mailbox 11 */
#define RFH12 0x1000 /* Enable Automatic Remote Frame Handling For Mailbox 12 */
#define RFH13 0x2000 /* Enable Automatic Remote Frame Handling For Mailbox 13 */
#define RFH14 0x4000 /* Enable Automatic Remote Frame Handling For Mailbox 14 */
#define RFH15 0x8000 /* Enable Automatic Remote Frame Handling For Mailbox 15 */
/* CAN_RFH2 Masks */
#define RFH16 0x0001 /* Enable Automatic Remote Frame Handling For Mailbox 16 */
#define RFH17 0x0002 /* Enable Automatic Remote Frame Handling For Mailbox 17 */
#define RFH18 0x0004 /* Enable Automatic Remote Frame Handling For Mailbox 18 */
#define RFH19 0x0008 /* Enable Automatic Remote Frame Handling For Mailbox 19 */
#define RFH20 0x0010 /* Enable Automatic Remote Frame Handling For Mailbox 20 */
#define RFH21 0x0020 /* Enable Automatic Remote Frame Handling For Mailbox 21 */
#define RFH22 0x0040 /* Enable Automatic Remote Frame Handling For Mailbox 22 */
#define RFH23 0x0080 /* Enable Automatic Remote Frame Handling For Mailbox 23 */
#define RFH24 0x0100 /* Enable Automatic Remote Frame Handling For Mailbox 24 */
#define RFH25 0x0200 /* Enable Automatic Remote Frame Handling For Mailbox 25 */
#define RFH26 0x0400 /* Enable Automatic Remote Frame Handling For Mailbox 26 */
#define RFH27 0x0800 /* Enable Automatic Remote Frame Handling For Mailbox 27 */
#define RFH28 0x1000 /* Enable Automatic Remote Frame Handling For Mailbox 28 */
#define RFH29 0x2000 /* Enable Automatic Remote Frame Handling For Mailbox 29 */
#define RFH30 0x4000 /* Enable Automatic Remote Frame Handling For Mailbox 30 */
#define RFH31 0x8000 /* Enable Automatic Remote Frame Handling For Mailbox 31 */
/* CAN_MBTIF1 Masks */
#define MBTIF0 0x0001 /* TX Interrupt Active In Mailbox 0 */
#define MBTIF1 0x0002 /* TX Interrupt Active In Mailbox 1 */
#define MBTIF2 0x0004 /* TX Interrupt Active In Mailbox 2 */
#define MBTIF3 0x0008 /* TX Interrupt Active In Mailbox 3 */
#define MBTIF4 0x0010 /* TX Interrupt Active In Mailbox 4 */
#define MBTIF5 0x0020 /* TX Interrupt Active In Mailbox 5 */
#define MBTIF6 0x0040 /* TX Interrupt Active In Mailbox 6 */
#define MBTIF7 0x0080 /* TX Interrupt Active In Mailbox 7 */
#define MBTIF8 0x0100 /* TX Interrupt Active In Mailbox 8 */
#define MBTIF9 0x0200 /* TX Interrupt Active In Mailbox 9 */
#define MBTIF10 0x0400 /* TX Interrupt Active In Mailbox 10 */
#define MBTIF11 0x0800 /* TX Interrupt Active In Mailbox 11 */
#define MBTIF12 0x1000 /* TX Interrupt Active In Mailbox 12 */
#define MBTIF13 0x2000 /* TX Interrupt Active In Mailbox 13 */
#define MBTIF14 0x4000 /* TX Interrupt Active In Mailbox 14 */
#define MBTIF15 0x8000 /* TX Interrupt Active In Mailbox 15 */
/* CAN_MBTIF2 Masks */
#define MBTIF16 0x0001 /* TX Interrupt Active In Mailbox 16 */
#define MBTIF17 0x0002 /* TX Interrupt Active In Mailbox 17 */
#define MBTIF18 0x0004 /* TX Interrupt Active In Mailbox 18 */
#define MBTIF19 0x0008 /* TX Interrupt Active In Mailbox 19 */
#define MBTIF20 0x0010 /* TX Interrupt Active In Mailbox 20 */
#define MBTIF21 0x0020 /* TX Interrupt Active In Mailbox 21 */
#define MBTIF22 0x0040 /* TX Interrupt Active In Mailbox 22 */
#define MBTIF23 0x0080 /* TX Interrupt Active In Mailbox 23 */
#define MBTIF24 0x0100 /* TX Interrupt Active In Mailbox 24 */
#define MBTIF25 0x0200 /* TX Interrupt Active In Mailbox 25 */
#define MBTIF26 0x0400 /* TX Interrupt Active In Mailbox 26 */
#define MBTIF27 0x0800 /* TX Interrupt Active In Mailbox 27 */
#define MBTIF28 0x1000 /* TX Interrupt Active In Mailbox 28 */
#define MBTIF29 0x2000 /* TX Interrupt Active In Mailbox 29 */
#define MBTIF30 0x4000 /* TX Interrupt Active In Mailbox 30 */
#define MBTIF31 0x8000 /* TX Interrupt Active In Mailbox 31 */
/* CAN_MBRIF1 Masks */
#define MBRIF0 0x0001 /* RX Interrupt Active In Mailbox 0 */
#define MBRIF1 0x0002 /* RX Interrupt Active In Mailbox 1 */
#define MBRIF2 0x0004 /* RX Interrupt Active In Mailbox 2 */
#define MBRIF3 0x0008 /* RX Interrupt Active In Mailbox 3 */
#define MBRIF4 0x0010 /* RX Interrupt Active In Mailbox 4 */
#define MBRIF5 0x0020 /* RX Interrupt Active In Mailbox 5 */
#define MBRIF6 0x0040 /* RX Interrupt Active In Mailbox 6 */
#define MBRIF7 0x0080 /* RX Interrupt Active In Mailbox 7 */
#define MBRIF8 0x0100 /* RX Interrupt Active In Mailbox 8 */
#define MBRIF9 0x0200 /* RX Interrupt Active In Mailbox 9 */
#define MBRIF10 0x0400 /* RX Interrupt Active In Mailbox 10 */
#define MBRIF11 0x0800 /* RX Interrupt Active In Mailbox 11 */
#define MBRIF12 0x1000 /* RX Interrupt Active In Mailbox 12 */
#define MBRIF13 0x2000 /* RX Interrupt Active In Mailbox 13 */
#define MBRIF14 0x4000 /* RX Interrupt Active In Mailbox 14 */
#define MBRIF15 0x8000 /* RX Interrupt Active In Mailbox 15 */
/* CAN_MBRIF2 Masks */
#define MBRIF16 0x0001 /* RX Interrupt Active In Mailbox 16 */
#define MBRIF17 0x0002 /* RX Interrupt Active In Mailbox 17 */
#define MBRIF18 0x0004 /* RX Interrupt Active In Mailbox 18 */
#define MBRIF19 0x0008 /* RX Interrupt Active In Mailbox 19 */
#define MBRIF20 0x0010 /* RX Interrupt Active In Mailbox 20 */
#define MBRIF21 0x0020 /* RX Interrupt Active In Mailbox 21 */
#define MBRIF22 0x0040 /* RX Interrupt Active In Mailbox 22 */
#define MBRIF23 0x0080 /* RX Interrupt Active In Mailbox 23 */
#define MBRIF24 0x0100 /* RX Interrupt Active In Mailbox 24 */
#define MBRIF25 0x0200 /* RX Interrupt Active In Mailbox 25 */
#define MBRIF26 0x0400 /* RX Interrupt Active In Mailbox 26 */
#define MBRIF27 0x0800 /* RX Interrupt Active In Mailbox 27 */
#define MBRIF28 0x1000 /* RX Interrupt Active In Mailbox 28 */
#define MBRIF29 0x2000 /* RX Interrupt Active In Mailbox 29 */
#define MBRIF30 0x4000 /* RX Interrupt Active In Mailbox 30 */
#define MBRIF31 0x8000 /* RX Interrupt Active In Mailbox 31 */
/* CAN_MBIM1 Masks */
#define MBIM0 0x0001 /* Enable Interrupt For Mailbox 0 */
#define MBIM1 0x0002 /* Enable Interrupt For Mailbox 1 */
#define MBIM2 0x0004 /* Enable Interrupt For Mailbox 2 */
#define MBIM3 0x0008 /* Enable Interrupt For Mailbox 3 */
#define MBIM4 0x0010 /* Enable Interrupt For Mailbox 4 */
#define MBIM5 0x0020 /* Enable Interrupt For Mailbox 5 */
#define MBIM6 0x0040 /* Enable Interrupt For Mailbox 6 */
#define MBIM7 0x0080 /* Enable Interrupt For Mailbox 7 */
#define MBIM8 0x0100 /* Enable Interrupt For Mailbox 8 */
#define MBIM9 0x0200 /* Enable Interrupt For Mailbox 9 */
#define MBIM10 0x0400 /* Enable Interrupt For Mailbox 10 */
#define MBIM11 0x0800 /* Enable Interrupt For Mailbox 11 */
#define MBIM12 0x1000 /* Enable Interrupt For Mailbox 12 */
#define MBIM13 0x2000 /* Enable Interrupt For Mailbox 13 */
#define MBIM14 0x4000 /* Enable Interrupt For Mailbox 14 */
#define MBIM15 0x8000 /* Enable Interrupt For Mailbox 15 */
/* CAN_MBIM2 Masks */
#define MBIM16 0x0001 /* Enable Interrupt For Mailbox 16 */
#define MBIM17 0x0002 /* Enable Interrupt For Mailbox 17 */
#define MBIM18 0x0004 /* Enable Interrupt For Mailbox 18 */
#define MBIM19 0x0008 /* Enable Interrupt For Mailbox 19 */
#define MBIM20 0x0010 /* Enable Interrupt For Mailbox 20 */
#define MBIM21 0x0020 /* Enable Interrupt For Mailbox 21 */
#define MBIM22 0x0040 /* Enable Interrupt For Mailbox 22 */
#define MBIM23 0x0080 /* Enable Interrupt For Mailbox 23 */
#define MBIM24 0x0100 /* Enable Interrupt For Mailbox 24 */
#define MBIM25 0x0200 /* Enable Interrupt For Mailbox 25 */
#define MBIM26 0x0400 /* Enable Interrupt For Mailbox 26 */
#define MBIM27 0x0800 /* Enable Interrupt For Mailbox 27 */
#define MBIM28 0x1000 /* Enable Interrupt For Mailbox 28 */
#define MBIM29 0x2000 /* Enable Interrupt For Mailbox 29 */
#define MBIM30 0x4000 /* Enable Interrupt For Mailbox 30 */
#define MBIM31 0x8000 /* Enable Interrupt For Mailbox 31 */
/* CAN_GIM Masks */
#define EWTIM 0x0001 /* Enable TX Error Count Interrupt */
#define EWRIM 0x0002 /* Enable RX Error Count Interrupt */
#define EPIM 0x0004 /* Enable Error-Passive Mode Interrupt */
#define BOIM 0x0008 /* Enable Bus Off Interrupt */
#define WUIM 0x0010 /* Enable Wake-Up Interrupt */
#define UIAIM 0x0020 /* Enable Access To Unimplemented Address Interrupt */
#define AAIM 0x0040 /* Enable Abort Acknowledge Interrupt */
#define RMLIM 0x0080 /* Enable RX Message Lost Interrupt */
#define UCEIM 0x0100 /* Enable Universal Counter Overflow Interrupt */
#define EXTIM 0x0200 /* Enable External Trigger Output Interrupt */
#define ADIM 0x0400 /* Enable Access Denied Interrupt */
/* CAN_GIS Masks */
#define EWTIS 0x0001 /* TX Error Count IRQ Status */
#define EWRIS 0x0002 /* RX Error Count IRQ Status */
#define EPIS 0x0004 /* Error-Passive Mode IRQ Status */
#define BOIS 0x0008 /* Bus Off IRQ Status */
#define WUIS 0x0010 /* Wake-Up IRQ Status */
#define UIAIS 0x0020 /* Access To Unimplemented Address IRQ Status */
#define AAIS 0x0040 /* Abort Acknowledge IRQ Status */
#define RMLIS 0x0080 /* RX Message Lost IRQ Status */
#define UCEIS 0x0100 /* Universal Counter Overflow IRQ Status */
#define EXTIS 0x0200 /* External Trigger Output IRQ Status */
#define ADIS 0x0400 /* Access Denied IRQ Status */
/* CAN_GIF Masks */
#define EWTIF 0x0001 /* TX Error Count IRQ Flag */
#define EWRIF 0x0002 /* RX Error Count IRQ Flag */
#define EPIF 0x0004 /* Error-Passive Mode IRQ Flag */
#define BOIF 0x0008 /* Bus Off IRQ Flag */
#define WUIF 0x0010 /* Wake-Up IRQ Flag */
#define UIAIF 0x0020 /* Access To Unimplemented Address IRQ Flag */
#define AAIF 0x0040 /* Abort Acknowledge IRQ Flag */
#define RMLIF 0x0080 /* RX Message Lost IRQ Flag */
#define UCEIF 0x0100 /* Universal Counter Overflow IRQ Flag */
#define EXTIF 0x0200 /* External Trigger Output IRQ Flag */
#define ADIF 0x0400 /* Access Denied IRQ Flag */
/* CAN_UCCNF Masks */
#define UCCNF 0x000F /* Universal Counter Mode */
#define UC_STAMP 0x0001 /* Timestamp Mode */
#define UC_WDOG 0x0002 /* Watchdog Mode */
#define UC_AUTOTX 0x0003 /* Auto-Transmit Mode */
#define UC_ERROR 0x0006 /* CAN Error Frame Count */
#define UC_OVER 0x0007 /* CAN Overload Frame Count */
#define UC_LOST 0x0008 /* Arbitration Lost During TX Count */
#define UC_AA 0x0009 /* TX Abort Count */
#define UC_TA 0x000A /* TX Successful Count */
#define UC_REJECT 0x000B /* RX Message Rejected Count */
#define UC_RML 0x000C /* RX Message Lost Count */
#define UC_RX 0x000D /* Total Successful RX Messages Count */
#define UC_RMP 0x000E /* Successful RX W/Matching ID Count */
#define UC_ALL 0x000F /* Correct Message On CAN Bus Line Count */
#define UCRC 0x0020 /* Universal Counter Reload/Clear */
#define UCCT 0x0040 /* Universal Counter CAN Trigger */
#define UCE 0x0080 /* Universal Counter Enable */
/* CAN_ESR Masks */
#define ACKE 0x0004 /* Acknowledge Error */
#define SER 0x0008 /* Stuff Error */
#define CRCE 0x0010 /* CRC Error */
#define SA0 0x0020 /* Stuck At Dominant Error */
#define BEF 0x0040 /* Bit Error Flag */
#define FER 0x0080 /* Form Error Flag */
/* CAN_EWR Masks */
#define EWLREC 0x00FF /* RX Error Count Limit (For EWRIS) */
#define EWLTEC 0xFF00 /* TX Error Count Limit (For EWTIS) */
/* ******************* PIN CONTROL REGISTER MASKS ************************/
/* PORT_MUX Masks */
#define PJSE 0x0001 /* Port J SPI/SPORT Enable */
......
arch/blackfin/mach-bf537/include/mach/irq.h
View file @ 064e297c
......@@ -74,7 +74,7 @@
#define IRQ_PPI_ERROR 42 /*PPI Error Interrupt */
#define IRQ_CAN_ERROR 43 /*CAN Error Interrupt */
#define IRQ_MAC_ERROR 44 /*PPI Error Interrupt */
#define IRQ_MAC_ERROR 44 /*MAC Status/Error Interrupt */
#define IRQ_SPORT0_ERROR 45 /*SPORT0 Error Interrupt */
#define IRQ_SPORT1_ERROR 46 /*SPORT1 Error Interrupt */
#define IRQ_SPI_ERROR 47 /*SPI Error Interrupt */
......
arch/blackfin/mach-bf538/include/mach/defBF539.h
View file @ 064e297c
......@@ -2418,625 +2418,4 @@
#define RCV_HALF 0x0004 /* Receive FIFO Has 1 Byte To Read */
#define RCV_FULL 0x000C /* Receive FIFO Full (2 Bytes To Read) */
/* ************ CONTROLLER AREA NETWORK (CAN) MASKS ***************/
/* CAN_CONTROL Masks */
#define SRS 0x0001 /* Software Reset */
#define DNM 0x0002 /* Device Net Mode */
#define ABO 0x0004 /* Auto-Bus On Enable */
#define WBA 0x0010 /* Wake-Up On CAN Bus Activity Enable */
#define SMR 0x0020 /* Sleep Mode Request */
#define CSR 0x0040 /* CAN Suspend Mode Request */
#define CCR 0x0080 /* CAN Configuration Mode Request */
/* CAN_STATUS Masks */
#define WT 0x0001 /* TX Warning Flag */
#define WR 0x0002 /* RX Warning Flag */
#define EP 0x0004 /* Error Passive Mode */
#define EBO 0x0008 /* Error Bus Off Mode */
#define CSA 0x0040 /* Suspend Mode Acknowledge */
#define CCA 0x0080 /* Configuration Mode Acknowledge */
#define MBPTR 0x1F00 /* Mailbox Pointer */
#define TRM 0x4000 /* Transmit Mode */
#define REC 0x8000 /* Receive Mode */
/* CAN_CLOCK Masks */
#define BRP 0x03FF /* Bit-Rate Pre-Scaler */
/* CAN_TIMING Masks */
#define TSEG1 0x000F /* Time Segment 1 */
#define TSEG2 0x0070 /* Time Segment 2 */
#define SAM 0x0080 /* Sampling */
#define SJW 0x0300 /* Synchronization Jump Width */
/* CAN_DEBUG Masks */
#define DEC 0x0001 /* Disable CAN Error Counters */
#define DRI 0x0002 /* Disable CAN RX Input */
#define DTO 0x0004 /* Disable CAN TX Output */
#define DIL 0x0008 /* Disable CAN Internal Loop */
#define MAA 0x0010 /* Mode Auto-Acknowledge Enable */
#define MRB 0x0020 /* Mode Read Back Enable */
#define CDE 0x8000 /* CAN Debug Enable */
/* CAN_CEC Masks */
#define RXECNT 0x00FF /* Receive Error Counter */
#define TXECNT 0xFF00 /* Transmit Error Counter */
/* CAN_INTR Masks */
#define MBRIRQ 0x0001 /* Mailbox Receive Interrupt */
#define MBRIF MBRIRQ /* legacy */
#define MBTIRQ 0x0002 /* Mailbox Transmit Interrupt */
#define MBTIF MBTIRQ /* legacy */
#define GIRQ 0x0004 /* Global Interrupt */
#define SMACK 0x0008 /* Sleep Mode Acknowledge */
#define CANTX 0x0040 /* CAN TX Bus Value */
#define CANRX 0x0080 /* CAN RX Bus Value */
/* CAN_MBxx_ID1 and CAN_MBxx_ID0 Masks */
#define DFC 0xFFFF /* Data Filtering Code (If Enabled) (ID0) */
#define EXTID_LO 0xFFFF /* Lower 16 Bits of Extended Identifier (ID0) */
#define EXTID_HI 0x0003 /* Upper 2 Bits of Extended Identifier (ID1) */
#define BASEID 0x1FFC /* Base Identifier */
#define IDE 0x2000 /* Identifier Extension */
#define RTR 0x4000 /* Remote Frame Transmission Request */
#define AME 0x8000 /* Acceptance Mask Enable */
/* CAN_MBxx_TIMESTAMP Masks */
#define TSV 0xFFFF /* Timestamp */
/* CAN_MBxx_LENGTH Masks */
#define DLC 0x000F /* Data Length Code */
/* CAN_AMxxH and CAN_AMxxL Masks */
#define DFM 0xFFFF /* Data Field Mask (If Enabled) (CAN_AMxxL) */
#define EXTID_LO 0xFFFF /* Lower 16 Bits of Extended Identifier (CAN_AMxxL) */
#define EXTID_HI 0x0003 /* Upper 2 Bits of Extended Identifier (CAN_AMxxH) */
#define BASEID 0x1FFC /* Base Identifier */
#define AMIDE 0x2000 /* Acceptance Mask ID Extension Enable */
#define FMD 0x4000 /* Full Mask Data Field Enable */
#define FDF 0x8000 /* Filter On Data Field Enable */
/* CAN_MC1 Masks */
#define MC0 0x0001 /* Enable Mailbox 0 */
#define MC1 0x0002 /* Enable Mailbox 1 */
#define MC2 0x0004 /* Enable Mailbox 2 */
#define MC3 0x0008 /* Enable Mailbox 3 */
#define MC4 0x0010 /* Enable Mailbox 4 */
#define MC5 0x0020 /* Enable Mailbox 5 */
#define MC6 0x0040 /* Enable Mailbox 6 */
#define MC7 0x0080 /* Enable Mailbox 7 */
#define MC8 0x0100 /* Enable Mailbox 8 */
#define MC9 0x0200 /* Enable Mailbox 9 */
#define MC10 0x0400 /* Enable Mailbox 10 */
#define MC11 0x0800 /* Enable Mailbox 11 */
#define MC12 0x1000 /* Enable Mailbox 12 */
#define MC13 0x2000 /* Enable Mailbox 13 */
#define MC14 0x4000 /* Enable Mailbox 14 */
#define MC15 0x8000 /* Enable Mailbox 15 */
/* CAN_MC2 Masks */
#define MC16 0x0001 /* Enable Mailbox 16 */
#define MC17 0x0002 /* Enable Mailbox 17 */
#define MC18 0x0004 /* Enable Mailbox 18 */
#define MC19 0x0008 /* Enable Mailbox 19 */
#define MC20 0x0010 /* Enable Mailbox 20 */
#define MC21 0x0020 /* Enable Mailbox 21 */
#define MC22 0x0040 /* Enable Mailbox 22 */
#define MC23 0x0080 /* Enable Mailbox 23 */
#define MC24 0x0100 /* Enable Mailbox 24 */
#define MC25 0x0200 /* Enable Mailbox 25 */
#define MC26 0x0400 /* Enable Mailbox 26 */
#define MC27 0x0800 /* Enable Mailbox 27 */
#define MC28 0x1000 /* Enable Mailbox 28 */
#define MC29 0x2000 /* Enable Mailbox 29 */
#define MC30 0x4000 /* Enable Mailbox 30 */
#define MC31 0x8000 /* Enable Mailbox 31 */
/* CAN_MD1 Masks */
#define MD0 0x0001 /* Enable Mailbox 0 For Receive */
#define MD1 0x0002 /* Enable Mailbox 1 For Receive */
#define MD2 0x0004 /* Enable Mailbox 2 For Receive */
#define MD3 0x0008 /* Enable Mailbox 3 For Receive */
#define MD4 0x0010 /* Enable Mailbox 4 For Receive */
#define MD5 0x0020 /* Enable Mailbox 5 For Receive */
#define MD6 0x0040 /* Enable Mailbox 6 For Receive */
#define MD7 0x0080 /* Enable Mailbox 7 For Receive */
#define MD8 0x0100 /* Enable Mailbox 8 For Receive */
#define MD9 0x0200 /* Enable Mailbox 9 For Receive */
#define MD10 0x0400 /* Enable Mailbox 10 For Receive */
#define MD11 0x0800 /* Enable Mailbox 11 For Receive */
#define MD12 0x1000 /* Enable Mailbox 12 For Receive */
#define MD13 0x2000 /* Enable Mailbox 13 For Receive */
#define MD14 0x4000 /* Enable Mailbox 14 For Receive */
#define MD15 0x8000 /* Enable Mailbox 15 For Receive */
/* CAN_MD2 Masks */
#define MD16 0x0001 /* Enable Mailbox 16 For Receive */
#define MD17 0x0002 /* Enable Mailbox 17 For Receive */
#define MD18 0x0004 /* Enable Mailbox 18 For Receive */
#define MD19 0x0008 /* Enable Mailbox 19 For Receive */
#define MD20 0x0010 /* Enable Mailbox 20 For Receive */
#define MD21 0x0020 /* Enable Mailbox 21 For Receive */
#define MD22 0x0040 /* Enable Mailbox 22 For Receive */
#define MD23 0x0080 /* Enable Mailbox 23 For Receive */
#define MD24 0x0100 /* Enable Mailbox 24 For Receive */
#define MD25 0x0200 /* Enable Mailbox 25 For Receive */
#define MD26 0x0400 /* Enable Mailbox 26 For Receive */
#define MD27 0x0800 /* Enable Mailbox 27 For Receive */
#define MD28 0x1000 /* Enable Mailbox 28 For Receive */
#define MD29 0x2000 /* Enable Mailbox 29 For Receive */
#define MD30 0x4000 /* Enable Mailbox 30 For Receive */
#define MD31 0x8000 /* Enable Mailbox 31 For Receive */
/* CAN_RMP1 Masks */
#define RMP0 0x0001 /* RX Message Pending In Mailbox 0 */
#define RMP1 0x0002 /* RX Message Pending In Mailbox 1 */
#define RMP2 0x0004 /* RX Message Pending In Mailbox 2 */
#define RMP3 0x0008 /* RX Message Pending In Mailbox 3 */
#define RMP4 0x0010 /* RX Message Pending In Mailbox 4 */
#define RMP5 0x0020 /* RX Message Pending In Mailbox 5 */
#define RMP6 0x0040 /* RX Message Pending In Mailbox 6 */
#define RMP7 0x0080 /* RX Message Pending In Mailbox 7 */
#define RMP8 0x0100 /* RX Message Pending In Mailbox 8 */
#define RMP9 0x0200 /* RX Message Pending In Mailbox 9 */
#define RMP10 0x0400 /* RX Message Pending In Mailbox 10 */
#define RMP11 0x0800 /* RX Message Pending In Mailbox 11 */
#define RMP12 0x1000 /* RX Message Pending In Mailbox 12 */
#define RMP13 0x2000 /* RX Message Pending In Mailbox 13 */
#define RMP14 0x4000 /* RX Message Pending In Mailbox 14 */
#define RMP15 0x8000 /* RX Message Pending In Mailbox 15 */
/* CAN_RMP2 Masks */
#define RMP16 0x0001 /* RX Message Pending In Mailbox 16 */
#define RMP17 0x0002 /* RX Message Pending In Mailbox 17 */
#define RMP18 0x0004 /* RX Message Pending In Mailbox 18 */
#define RMP19 0x0008 /* RX Message Pending In Mailbox 19 */
#define RMP20 0x0010 /* RX Message Pending In Mailbox 20 */
#define RMP21 0x0020 /* RX Message Pending In Mailbox 21 */
#define RMP22 0x0040 /* RX Message Pending In Mailbox 22 */
#define RMP23 0x0080 /* RX Message Pending In Mailbox 23 */
#define RMP24 0x0100 /* RX Message Pending In Mailbox 24 */
#define RMP25 0x0200 /* RX Message Pending In Mailbox 25 */
#define RMP26 0x0400 /* RX Message Pending In Mailbox 26 */
#define RMP27 0x0800 /* RX Message Pending In Mailbox 27 */
#define RMP28 0x1000 /* RX Message Pending In Mailbox 28 */
#define RMP29 0x2000 /* RX Message Pending In Mailbox 29 */
#define RMP30 0x4000 /* RX Message Pending In Mailbox 30 */
#define RMP31 0x8000 /* RX Message Pending In Mailbox 31 */
/* CAN_RML1 Masks */
#define RML0 0x0001 /* RX Message Lost In Mailbox 0 */
#define RML1 0x0002 /* RX Message Lost In Mailbox 1 */
#define RML2 0x0004 /* RX Message Lost In Mailbox 2 */
#define RML3 0x0008 /* RX Message Lost In Mailbox 3 */
#define RML4 0x0010 /* RX Message Lost In Mailbox 4 */
#define RML5 0x0020 /* RX Message Lost In Mailbox 5 */
#define RML6 0x0040 /* RX Message Lost In Mailbox 6 */
#define RML7 0x0080 /* RX Message Lost In Mailbox 7 */
#define RML8 0x0100 /* RX Message Lost In Mailbox 8 */
#define RML9 0x0200 /* RX Message Lost In Mailbox 9 */
#define RML10 0x0400 /* RX Message Lost In Mailbox 10 */
#define RML11 0x0800 /* RX Message Lost In Mailbox 11 */
#define RML12 0x1000 /* RX Message Lost In Mailbox 12 */
#define RML13 0x2000 /* RX Message Lost In Mailbox 13 */
#define RML14 0x4000 /* RX Message Lost In Mailbox 14 */
#define RML15 0x8000 /* RX Message Lost In Mailbox 15 */
/* CAN_RML2 Masks */
#define RML16 0x0001 /* RX Message Lost In Mailbox 16 */
#define RML17 0x0002 /* RX Message Lost In Mailbox 17 */
#define RML18 0x0004 /* RX Message Lost In Mailbox 18 */
#define RML19 0x0008 /* RX Message Lost In Mailbox 19 */
#define RML20 0x0010 /* RX Message Lost In Mailbox 20 */
#define RML21 0x0020 /* RX Message Lost In Mailbox 21 */
#define RML22 0x0040 /* RX Message Lost In Mailbox 22 */
#define RML23 0x0080 /* RX Message Lost In Mailbox 23 */
#define RML24 0x0100 /* RX Message Lost In Mailbox 24 */
#define RML25 0x0200 /* RX Message Lost In Mailbox 25 */
#define RML26 0x0400 /* RX Message Lost In Mailbox 26 */
#define RML27 0x0800 /* RX Message Lost In Mailbox 27 */
#define RML28 0x1000 /* RX Message Lost In Mailbox 28 */
#define RML29 0x2000 /* RX Message Lost In Mailbox 29 */
#define RML30 0x4000 /* RX Message Lost In Mailbox 30 */
#define RML31 0x8000 /* RX Message Lost In Mailbox 31 */
/* CAN_OPSS1 Masks */
#define OPSS0 0x0001 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 0 */
#define OPSS1 0x0002 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 1 */
#define OPSS2 0x0004 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 2 */
#define OPSS3 0x0008 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 3 */
#define OPSS4 0x0010 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 4 */
#define OPSS5 0x0020 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 5 */
#define OPSS6 0x0040 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 6 */
#define OPSS7 0x0080 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 7 */
#define OPSS8 0x0100 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 8 */
#define OPSS9 0x0200 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 9 */
#define OPSS10 0x0400 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 10 */
#define OPSS11 0x0800 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 11 */
#define OPSS12 0x1000 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 12 */
#define OPSS13 0x2000 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 13 */
#define OPSS14 0x4000 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 14 */
#define OPSS15 0x8000 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 15 */
/* CAN_OPSS2 Masks */
#define OPSS16 0x0001 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 16 */
#define OPSS17 0x0002 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 17 */
#define OPSS18 0x0004 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 18 */
#define OPSS19 0x0008 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 19 */
#define OPSS20 0x0010 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 20 */
#define OPSS21 0x0020 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 21 */
#define OPSS22 0x0040 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 22 */
#define OPSS23 0x0080 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 23 */
#define OPSS24 0x0100 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 24 */
#define OPSS25 0x0200 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 25 */
#define OPSS26 0x0400 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 26 */
#define OPSS27 0x0800 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 27 */
#define OPSS28 0x1000 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 28 */
#define OPSS29 0x2000 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 29 */
#define OPSS30 0x4000 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 30 */
#define OPSS31 0x8000 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 31 */
/* CAN_TRR1 Masks */
#define TRR0 0x0001 /* Deny But Don't Lock Access To Mailbox 0 */
#define TRR1 0x0002 /* Deny But Don't Lock Access To Mailbox 1 */
#define TRR2 0x0004 /* Deny But Don't Lock Access To Mailbox 2 */
#define TRR3 0x0008 /* Deny But Don't Lock Access To Mailbox 3 */
#define TRR4 0x0010 /* Deny But Don't Lock Access To Mailbox 4 */
#define TRR5 0x0020 /* Deny But Don't Lock Access To Mailbox 5 */
#define TRR6 0x0040 /* Deny But Don't Lock Access To Mailbox 6 */
#define TRR7 0x0080 /* Deny But Don't Lock Access To Mailbox 7 */
#define TRR8 0x0100 /* Deny But Don't Lock Access To Mailbox 8 */
#define TRR9 0x0200 /* Deny But Don't Lock Access To Mailbox 9 */
#define TRR10 0x0400 /* Deny But Don't Lock Access To Mailbox 10 */
#define TRR11 0x0800 /* Deny But Don't Lock Access To Mailbox 11 */
#define TRR12 0x1000 /* Deny But Don't Lock Access To Mailbox 12 */
#define TRR13 0x2000 /* Deny But Don't Lock Access To Mailbox 13 */
#define TRR14 0x4000 /* Deny But Don't Lock Access To Mailbox 14 */
#define TRR15 0x8000 /* Deny But Don't Lock Access To Mailbox 15 */
/* CAN_TRR2 Masks */
#define TRR16 0x0001 /* Deny But Don't Lock Access To Mailbox 16 */
#define TRR17 0x0002 /* Deny But Don't Lock Access To Mailbox 17 */
#define TRR18 0x0004 /* Deny But Don't Lock Access To Mailbox 18 */
#define TRR19 0x0008 /* Deny But Don't Lock Access To Mailbox 19 */
#define TRR20 0x0010 /* Deny But Don't Lock Access To Mailbox 20 */
#define TRR21 0x0020 /* Deny But Don't Lock Access To Mailbox 21 */
#define TRR22 0x0040 /* Deny But Don't Lock Access To Mailbox 22 */
#define TRR23 0x0080 /* Deny But Don't Lock Access To Mailbox 23 */
#define TRR24 0x0100 /* Deny But Don't Lock Access To Mailbox 24 */
#define TRR25 0x0200 /* Deny But Don't Lock Access To Mailbox 25 */
#define TRR26 0x0400 /* Deny But Don't Lock Access To Mailbox 26 */
#define TRR27 0x0800 /* Deny But Don't Lock Access To Mailbox 27 */
#define TRR28 0x1000 /* Deny But Don't Lock Access To Mailbox 28 */
#define TRR29 0x2000 /* Deny But Don't Lock Access To Mailbox 29 */
#define TRR30 0x4000 /* Deny But Don't Lock Access To Mailbox 30 */
#define TRR31 0x8000 /* Deny But Don't Lock Access To Mailbox 31 */
/* CAN_TRS1 Masks */
#define TRS0 0x0001 /* Remote Frame Request For Mailbox 0 */
#define TRS1 0x0002 /* Remote Frame Request For Mailbox 1 */
#define TRS2 0x0004 /* Remote Frame Request For Mailbox 2 */
#define TRS3 0x0008 /* Remote Frame Request For Mailbox 3 */
#define TRS4 0x0010 /* Remote Frame Request For Mailbox 4 */
#define TRS5 0x0020 /* Remote Frame Request For Mailbox 5 */
#define TRS6 0x0040 /* Remote Frame Request For Mailbox 6 */
#define TRS7 0x0080 /* Remote Frame Request For Mailbox 7 */
#define TRS8 0x0100 /* Remote Frame Request For Mailbox 8 */
#define TRS9 0x0200 /* Remote Frame Request For Mailbox 9 */
#define TRS10 0x0400 /* Remote Frame Request For Mailbox 10 */
#define TRS11 0x0800 /* Remote Frame Request For Mailbox 11 */
#define TRS12 0x1000 /* Remote Frame Request For Mailbox 12 */
#define TRS13 0x2000 /* Remote Frame Request For Mailbox 13 */
#define TRS14 0x4000 /* Remote Frame Request For Mailbox 14 */
#define TRS15 0x8000 /* Remote Frame Request For Mailbox 15 */
/* CAN_TRS2 Masks */
#define TRS16 0x0001 /* Remote Frame Request For Mailbox 16 */
#define TRS17 0x0002 /* Remote Frame Request For Mailbox 17 */
#define TRS18 0x0004 /* Remote Frame Request For Mailbox 18 */
#define TRS19 0x0008 /* Remote Frame Request For Mailbox 19 */
#define TRS20 0x0010 /* Remote Frame Request For Mailbox 20 */
#define TRS21 0x0020 /* Remote Frame Request For Mailbox 21 */
#define TRS22 0x0040 /* Remote Frame Request For Mailbox 22 */
#define TRS23 0x0080 /* Remote Frame Request For Mailbox 23 */
#define TRS24 0x0100 /* Remote Frame Request For Mailbox 24 */
#define TRS25 0x0200 /* Remote Frame Request For Mailbox 25 */
#define TRS26 0x0400 /* Remote Frame Request For Mailbox 26 */
#define TRS27 0x0800 /* Remote Frame Request For Mailbox 27 */
#define TRS28 0x1000 /* Remote Frame Request For Mailbox 28 */
#define TRS29 0x2000 /* Remote Frame Request For Mailbox 29 */
#define TRS30 0x4000 /* Remote Frame Request For Mailbox 30 */
#define TRS31 0x8000 /* Remote Frame Request For Mailbox 31 */
/* CAN_AA1 Masks */
#define AA0 0x0001 /* Aborted Message In Mailbox 0 */
#define AA1 0x0002 /* Aborted Message In Mailbox 1 */
#define AA2 0x0004 /* Aborted Message In Mailbox 2 */
#define AA3 0x0008 /* Aborted Message In Mailbox 3 */
#define AA4 0x0010 /* Aborted Message In Mailbox 4 */
#define AA5 0x0020 /* Aborted Message In Mailbox 5 */
#define AA6 0x0040 /* Aborted Message In Mailbox 6 */
#define AA7 0x0080 /* Aborted Message In Mailbox 7 */
#define AA8 0x0100 /* Aborted Message In Mailbox 8 */
#define AA9 0x0200 /* Aborted Message In Mailbox 9 */
#define AA10 0x0400 /* Aborted Message In Mailbox 10 */
#define AA11 0x0800 /* Aborted Message In Mailbox 11 */
#define AA12 0x1000 /* Aborted Message In Mailbox 12 */
#define AA13 0x2000 /* Aborted Message In Mailbox 13 */
#define AA14 0x4000 /* Aborted Message In Mailbox 14 */
#define AA15 0x8000 /* Aborted Message In Mailbox 15 */
/* CAN_AA2 Masks */
#define AA16 0x0001 /* Aborted Message In Mailbox 16 */
#define AA17 0x0002 /* Aborted Message In Mailbox 17 */
#define AA18 0x0004 /* Aborted Message In Mailbox 18 */
#define AA19 0x0008 /* Aborted Message In Mailbox 19 */
#define AA20 0x0010 /* Aborted Message In Mailbox 20 */
#define AA21 0x0020 /* Aborted Message In Mailbox 21 */
#define AA22 0x0040 /* Aborted Message In Mailbox 22 */
#define AA23 0x0080 /* Aborted Message In Mailbox 23 */
#define AA24 0x0100 /* Aborted Message In Mailbox 24 */
#define AA25 0x0200 /* Aborted Message In Mailbox 25 */
#define AA26 0x0400 /* Aborted Message In Mailbox 26 */
#define AA27 0x0800 /* Aborted Message In Mailbox 27 */
#define AA28 0x1000 /* Aborted Message In Mailbox 28 */
#define AA29 0x2000 /* Aborted Message In Mailbox 29 */
#define AA30 0x4000 /* Aborted Message In Mailbox 30 */
#define AA31 0x8000 /* Aborted Message In Mailbox 31 */
/* CAN_TA1 Masks */
#define TA0 0x0001 /* Transmit Successful From Mailbox 0 */
#define TA1 0x0002 /* Transmit Successful From Mailbox 1 */
#define TA2 0x0004 /* Transmit Successful From Mailbox 2 */
#define TA3 0x0008 /* Transmit Successful From Mailbox 3 */
#define TA4 0x0010 /* Transmit Successful From Mailbox 4 */
#define TA5 0x0020 /* Transmit Successful From Mailbox 5 */
#define TA6 0x0040 /* Transmit Successful From Mailbox 6 */
#define TA7 0x0080 /* Transmit Successful From Mailbox 7 */
#define TA8 0x0100 /* Transmit Successful From Mailbox 8 */
#define TA9 0x0200 /* Transmit Successful From Mailbox 9 */
#define TA10 0x0400 /* Transmit Successful From Mailbox 10 */
#define TA11 0x0800 /* Transmit Successful From Mailbox 11 */
#define TA12 0x1000 /* Transmit Successful From Mailbox 12 */
#define TA13 0x2000 /* Transmit Successful From Mailbox 13 */
#define TA14 0x4000 /* Transmit Successful From Mailbox 14 */
#define TA15 0x8000 /* Transmit Successful From Mailbox 15 */
/* CAN_TA2 Masks */
#define TA16 0x0001 /* Transmit Successful From Mailbox 16 */
#define TA17 0x0002 /* Transmit Successful From Mailbox 17 */
#define TA18 0x0004 /* Transmit Successful From Mailbox 18 */
#define TA19 0x0008 /* Transmit Successful From Mailbox 19 */
#define TA20 0x0010 /* Transmit Successful From Mailbox 20 */
#define TA21 0x0020 /* Transmit Successful From Mailbox 21 */
#define TA22 0x0040 /* Transmit Successful From Mailbox 22 */
#define TA23 0x0080 /* Transmit Successful From Mailbox 23 */
#define TA24 0x0100 /* Transmit Successful From Mailbox 24 */
#define TA25 0x0200 /* Transmit Successful From Mailbox 25 */
#define TA26 0x0400 /* Transmit Successful From Mailbox 26 */
#define TA27 0x0800 /* Transmit Successful From Mailbox 27 */
#define TA28 0x1000 /* Transmit Successful From Mailbox 28 */
#define TA29 0x2000 /* Transmit Successful From Mailbox 29 */
#define TA30 0x4000 /* Transmit Successful From Mailbox 30 */
#define TA31 0x8000 /* Transmit Successful From Mailbox 31 */
/* CAN_MBTD Masks */
#define TDPTR 0x001F /* Mailbox To Temporarily Disable */
#define TDA 0x0040 /* Temporary Disable Acknowledge */
#define TDR 0x0080 /* Temporary Disable Request */
/* CAN_RFH1 Masks */
#define RFH0 0x0001 /* Enable Automatic Remote Frame Handling For Mailbox 0 */
#define RFH1 0x0002 /* Enable Automatic Remote Frame Handling For Mailbox 1 */
#define RFH2 0x0004 /* Enable Automatic Remote Frame Handling For Mailbox 2 */
#define RFH3 0x0008 /* Enable Automatic Remote Frame Handling For Mailbox 3 */
#define RFH4 0x0010 /* Enable Automatic Remote Frame Handling For Mailbox 4 */
#define RFH5 0x0020 /* Enable Automatic Remote Frame Handling For Mailbox 5 */
#define RFH6 0x0040 /* Enable Automatic Remote Frame Handling For Mailbox 6 */
#define RFH7 0x0080 /* Enable Automatic Remote Frame Handling For Mailbox 7 */
#define RFH8 0x0100 /* Enable Automatic Remote Frame Handling For Mailbox 8 */
#define RFH9 0x0200 /* Enable Automatic Remote Frame Handling For Mailbox 9 */
#define RFH10 0x0400 /* Enable Automatic Remote Frame Handling For Mailbox 10 */
#define RFH11 0x0800 /* Enable Automatic Remote Frame Handling For Mailbox 11 */
#define RFH12 0x1000 /* Enable Automatic Remote Frame Handling For Mailbox 12 */
#define RFH13 0x2000 /* Enable Automatic Remote Frame Handling For Mailbox 13 */
#define RFH14 0x4000 /* Enable Automatic Remote Frame Handling For Mailbox 14 */
#define RFH15 0x8000 /* Enable Automatic Remote Frame Handling For Mailbox 15 */
/* CAN_RFH2 Masks */
#define RFH16 0x0001 /* Enable Automatic Remote Frame Handling For Mailbox 16 */
#define RFH17 0x0002 /* Enable Automatic Remote Frame Handling For Mailbox 17 */
#define RFH18 0x0004 /* Enable Automatic Remote Frame Handling For Mailbox 18 */
#define RFH19 0x0008 /* Enable Automatic Remote Frame Handling For Mailbox 19 */
#define RFH20 0x0010 /* Enable Automatic Remote Frame Handling For Mailbox 20 */
#define RFH21 0x0020 /* Enable Automatic Remote Frame Handling For Mailbox 21 */
#define RFH22 0x0040 /* Enable Automatic Remote Frame Handling For Mailbox 22 */
#define RFH23 0x0080 /* Enable Automatic Remote Frame Handling For Mailbox 23 */
#define RFH24 0x0100 /* Enable Automatic Remote Frame Handling For Mailbox 24 */
#define RFH25 0x0200 /* Enable Automatic Remote Frame Handling For Mailbox 25 */
#define RFH26 0x0400 /* Enable Automatic Remote Frame Handling For Mailbox 26 */
#define RFH27 0x0800 /* Enable Automatic Remote Frame Handling For Mailbox 27 */
#define RFH28 0x1000 /* Enable Automatic Remote Frame Handling For Mailbox 28 */
#define RFH29 0x2000 /* Enable Automatic Remote Frame Handling For Mailbox 29 */
#define RFH30 0x4000 /* Enable Automatic Remote Frame Handling For Mailbox 30 */
#define RFH31 0x8000 /* Enable Automatic Remote Frame Handling For Mailbox 31 */
/* CAN_MBTIF1 Masks */
#define MBTIF0 0x0001 /* TX Interrupt Active In Mailbox 0 */
#define MBTIF1 0x0002 /* TX Interrupt Active In Mailbox 1 */
#define MBTIF2 0x0004 /* TX Interrupt Active In Mailbox 2 */
#define MBTIF3 0x0008 /* TX Interrupt Active In Mailbox 3 */
#define MBTIF4 0x0010 /* TX Interrupt Active In Mailbox 4 */
#define MBTIF5 0x0020 /* TX Interrupt Active In Mailbox 5 */
#define MBTIF6 0x0040 /* TX Interrupt Active In Mailbox 6 */
#define MBTIF7 0x0080 /* TX Interrupt Active In Mailbox 7 */
#define MBTIF8 0x0100 /* TX Interrupt Active In Mailbox 8 */
#define MBTIF9 0x0200 /* TX Interrupt Active In Mailbox 9 */
#define MBTIF10 0x0400 /* TX Interrupt Active In Mailbox 10 */
#define MBTIF11 0x0800 /* TX Interrupt Active In Mailbox 11 */
#define MBTIF12 0x1000 /* TX Interrupt Active In Mailbox 12 */
#define MBTIF13 0x2000 /* TX Interrupt Active In Mailbox 13 */
#define MBTIF14 0x4000 /* TX Interrupt Active In Mailbox 14 */
#define MBTIF15 0x8000 /* TX Interrupt Active In Mailbox 15 */
/* CAN_MBTIF2 Masks */
#define MBTIF16 0x0001 /* TX Interrupt Active In Mailbox 16 */
#define MBTIF17 0x0002 /* TX Interrupt Active In Mailbox 17 */
#define MBTIF18 0x0004 /* TX Interrupt Active In Mailbox 18 */
#define MBTIF19 0x0008 /* TX Interrupt Active In Mailbox 19 */
#define MBTIF20 0x0010 /* TX Interrupt Active In Mailbox 20 */
#define MBTIF21 0x0020 /* TX Interrupt Active In Mailbox 21 */
#define MBTIF22 0x0040 /* TX Interrupt Active In Mailbox 22 */
#define MBTIF23 0x0080 /* TX Interrupt Active In Mailbox 23 */
#define MBTIF24 0x0100 /* TX Interrupt Active In Mailbox 24 */
#define MBTIF25 0x0200 /* TX Interrupt Active In Mailbox 25 */
#define MBTIF26 0x0400 /* TX Interrupt Active In Mailbox 26 */
#define MBTIF27 0x0800 /* TX Interrupt Active In Mailbox 27 */
#define MBTIF28 0x1000 /* TX Interrupt Active In Mailbox 28 */
#define MBTIF29 0x2000 /* TX Interrupt Active In Mailbox 29 */
#define MBTIF30 0x4000 /* TX Interrupt Active In Mailbox 30 */
#define MBTIF31 0x8000 /* TX Interrupt Active In Mailbox 31 */
/* CAN_MBRIF1 Masks */
#define MBRIF0 0x0001 /* RX Interrupt Active In Mailbox 0 */
#define MBRIF1 0x0002 /* RX Interrupt Active In Mailbox 1 */
#define MBRIF2 0x0004 /* RX Interrupt Active In Mailbox 2 */
#define MBRIF3 0x0008 /* RX Interrupt Active In Mailbox 3 */
#define MBRIF4 0x0010 /* RX Interrupt Active In Mailbox 4 */
#define MBRIF5 0x0020 /* RX Interrupt Active In Mailbox 5 */
#define MBRIF6 0x0040 /* RX Interrupt Active In Mailbox 6 */
#define MBRIF7 0x0080 /* RX Interrupt Active In Mailbox 7 */
#define MBRIF8 0x0100 /* RX Interrupt Active In Mailbox 8 */
#define MBRIF9 0x0200 /* RX Interrupt Active In Mailbox 9 */
#define MBRIF10 0x0400 /* RX Interrupt Active In Mailbox 10 */
#define MBRIF11 0x0800 /* RX Interrupt Active In Mailbox 11 */
#define MBRIF12 0x1000 /* RX Interrupt Active In Mailbox 12 */
#define MBRIF13 0x2000 /* RX Interrupt Active In Mailbox 13 */
#define MBRIF14 0x4000 /* RX Interrupt Active In Mailbox 14 */
#define MBRIF15 0x8000 /* RX Interrupt Active In Mailbox 15 */
/* CAN_MBRIF2 Masks */
#define MBRIF16 0x0001 /* RX Interrupt Active In Mailbox 16 */
#define MBRIF17 0x0002 /* RX Interrupt Active In Mailbox 17 */
#define MBRIF18 0x0004 /* RX Interrupt Active In Mailbox 18 */
#define MBRIF19 0x0008 /* RX Interrupt Active In Mailbox 19 */
#define MBRIF20 0x0010 /* RX Interrupt Active In Mailbox 20 */
#define MBRIF21 0x0020 /* RX Interrupt Active In Mailbox 21 */
#define MBRIF22 0x0040 /* RX Interrupt Active In Mailbox 22 */
#define MBRIF23 0x0080 /* RX Interrupt Active In Mailbox 23 */
#define MBRIF24 0x0100 /* RX Interrupt Active In Mailbox 24 */
#define MBRIF25 0x0200 /* RX Interrupt Active In Mailbox 25 */
#define MBRIF26 0x0400 /* RX Interrupt Active In Mailbox 26 */
#define MBRIF27 0x0800 /* RX Interrupt Active In Mailbox 27 */
#define MBRIF28 0x1000 /* RX Interrupt Active In Mailbox 28 */
#define MBRIF29 0x2000 /* RX Interrupt Active In Mailbox 29 */
#define MBRIF30 0x4000 /* RX Interrupt Active In Mailbox 30 */
#define MBRIF31 0x8000 /* RX Interrupt Active In Mailbox 31 */
/* CAN_MBIM1 Masks */
#define MBIM0 0x0001 /* Enable Interrupt For Mailbox 0 */
#define MBIM1 0x0002 /* Enable Interrupt For Mailbox 1 */
#define MBIM2 0x0004 /* Enable Interrupt For Mailbox 2 */
#define MBIM3 0x0008 /* Enable Interrupt For Mailbox 3 */
#define MBIM4 0x0010 /* Enable Interrupt For Mailbox 4 */
#define MBIM5 0x0020 /* Enable Interrupt For Mailbox 5 */
#define MBIM6 0x0040 /* Enable Interrupt For Mailbox 6 */
#define MBIM7 0x0080 /* Enable Interrupt For Mailbox 7 */
#define MBIM8 0x0100 /* Enable Interrupt For Mailbox 8 */
#define MBIM9 0x0200 /* Enable Interrupt For Mailbox 9 */
#define MBIM10 0x0400 /* Enable Interrupt For Mailbox 10 */
#define MBIM11 0x0800 /* Enable Interrupt For Mailbox 11 */
#define MBIM12 0x1000 /* Enable Interrupt For Mailbox 12 */
#define MBIM13 0x2000 /* Enable Interrupt For Mailbox 13 */
#define MBIM14 0x4000 /* Enable Interrupt For Mailbox 14 */
#define MBIM15 0x8000 /* Enable Interrupt For Mailbox 15 */
/* CAN_MBIM2 Masks */
#define MBIM16 0x0001 /* Enable Interrupt For Mailbox 16 */
#define MBIM17 0x0002 /* Enable Interrupt For Mailbox 17 */
#define MBIM18 0x0004 /* Enable Interrupt For Mailbox 18 */
#define MBIM19 0x0008 /* Enable Interrupt For Mailbox 19 */
#define MBIM20 0x0010 /* Enable Interrupt For Mailbox 20 */
#define MBIM21 0x0020 /* Enable Interrupt For Mailbox 21 */
#define MBIM22 0x0040 /* Enable Interrupt For Mailbox 22 */
#define MBIM23 0x0080 /* Enable Interrupt For Mailbox 23 */
#define MBIM24 0x0100 /* Enable Interrupt For Mailbox 24 */
#define MBIM25 0x0200 /* Enable Interrupt For Mailbox 25 */
#define MBIM26 0x0400 /* Enable Interrupt For Mailbox 26 */
#define MBIM27 0x0800 /* Enable Interrupt For Mailbox 27 */
#define MBIM28 0x1000 /* Enable Interrupt For Mailbox 28 */
#define MBIM29 0x2000 /* Enable Interrupt For Mailbox 29 */
#define MBIM30 0x4000 /* Enable Interrupt For Mailbox 30 */
#define MBIM31 0x8000 /* Enable Interrupt For Mailbox 31 */
/* CAN_GIM Masks */
#define EWTIM 0x0001 /* Enable TX Error Count Interrupt */
#define EWRIM 0x0002 /* Enable RX Error Count Interrupt */
#define EPIM 0x0004 /* Enable Error-Passive Mode Interrupt */
#define BOIM 0x0008 /* Enable Bus Off Interrupt */
#define WUIM 0x0010 /* Enable Wake-Up Interrupt */
#define UIAIM 0x0020 /* Enable Access To Unimplemented Address Interrupt */
#define AAIM 0x0040 /* Enable Abort Acknowledge Interrupt */
#define RMLIM 0x0080 /* Enable RX Message Lost Interrupt */
#define UCEIM 0x0100 /* Enable Universal Counter Overflow Interrupt */
#define EXTIM 0x0200 /* Enable External Trigger Output Interrupt */
#define ADIM 0x0400 /* Enable Access Denied Interrupt */
/* CAN_GIS Masks */
#define EWTIS 0x0001 /* TX Error Count IRQ Status */
#define EWRIS 0x0002 /* RX Error Count IRQ Status */
#define EPIS 0x0004 /* Error-Passive Mode IRQ Status */
#define BOIS 0x0008 /* Bus Off IRQ Status */
#define WUIS 0x0010 /* Wake-Up IRQ Status */
#define UIAIS 0x0020 /* Access To Unimplemented Address IRQ Status */
#define AAIS 0x0040 /* Abort Acknowledge IRQ Status */
#define RMLIS 0x0080 /* RX Message Lost IRQ Status */
#define UCEIS 0x0100 /* Universal Counter Overflow IRQ Status */
#define EXTIS 0x0200 /* External Trigger Output IRQ Status */
#define ADIS 0x0400 /* Access Denied IRQ Status */
/* CAN_GIF Masks */
#define EWTIF 0x0001 /* TX Error Count IRQ Flag */
#define EWRIF 0x0002 /* RX Error Count IRQ Flag */
#define EPIF 0x0004 /* Error-Passive Mode IRQ Flag */
#define BOIF 0x0008 /* Bus Off IRQ Flag */
#define WUIF 0x0010 /* Wake-Up IRQ Flag */
#define UIAIF 0x0020 /* Access To Unimplemented Address IRQ Flag */
#define AAIF 0x0040 /* Abort Acknowledge IRQ Flag */
#define RMLIF 0x0080 /* RX Message Lost IRQ Flag */
#define UCEIF 0x0100 /* Universal Counter Overflow IRQ Flag */
#define EXTIF 0x0200 /* External Trigger Output IRQ Flag */
#define ADIF 0x0400 /* Access Denied IRQ Flag */
/* CAN_UCCNF Masks */
#define UCCNF 0x000F /* Universal Counter Mode */
#define UC_STAMP 0x0001 /* Timestamp Mode */
#define UC_WDOG 0x0002 /* Watchdog Mode */
#define UC_AUTOTX 0x0003 /* Auto-Transmit Mode */
#define UC_ERROR 0x0006 /* CAN Error Frame Count */
#define UC_OVER 0x0007 /* CAN Overload Frame Count */
#define UC_LOST 0x0008 /* Arbitration Lost During TX Count */
#define UC_AA 0x0009 /* TX Abort Count */
#define UC_TA 0x000A /* TX Successful Count */
#define UC_REJECT 0x000B /* RX Message Rejected Count */
#define UC_RML 0x000C /* RX Message Lost Count */
#define UC_RX 0x000D /* Total Successful RX Messages Count */
#define UC_RMP 0x000E /* Successful RX W/Matching ID Count */
#define UC_ALL 0x000F /* Correct Message On CAN Bus Line Count */
#define UCRC 0x0020 /* Universal Counter Reload/Clear */
#define UCCT 0x0040 /* Universal Counter CAN Trigger */
#define UCE 0x0080 /* Universal Counter Enable */
/* CAN_ESR Masks */
#define ACKE 0x0004 /* Acknowledge Error */
#define SER 0x0008 /* Stuff Error */
#define CRCE 0x0010 /* CRC Error */
#define SA0 0x0020 /* Stuck At Dominant Error */
#define BEF 0x0040 /* Bit Error Flag */
#define FER 0x0080 /* Form Error Flag */
/* CAN_EWR Masks */
#define EWLREC 0x00FF /* RX Error Count Limit (For EWRIS) */
#define EWLTEC 0xFF00 /* TX Error Count Limit (For EWTIS) */
#endif /* _DEF_BF539_H */
arch/blackfin/mach-bf548/boards/cm_bf548.c
View file @ 064e297c
......@@ -498,6 +498,10 @@ static struct musb_hdrc_config musb_config = {
.num_eps = 8,
.dma_channels = 8,
.gpio_vrsel = GPIO_PH6,
/* Some custom boards need to be active low, just set it to "0"
* if it is the case.
*/
.gpio_vrsel_active = 1,
};
static struct musb_hdrc_platform_data musb_plat = {
......
arch/blackfin/mach-bf548/boards/ezkit.c
View file @ 064e297c
......@@ -603,6 +603,10 @@ static struct musb_hdrc_config musb_config = {
.num_eps = 8,
.dma_channels = 8,
.gpio_vrsel = GPIO_PE7,
/* Some custom boards need to be active low, just set it to "0"
* if it is the case.
*/
.gpio_vrsel_active = 1,
};
static struct musb_hdrc_platform_data musb_plat = {
......
arch/blackfin/mach-bf548/include/mach/defBF54x_base.h
View file @ 064e297c
......@@ -2104,677 +2104,6 @@
#define ECCCNT 0x3ff /* Transfer Count */
/* Bit masks for CAN0_CONTROL */
#define SRS 0x1 /* Software Reset */
#define DNM 0x2 /* DeviceNet Mode */
#define ABO 0x4 /* Auto Bus On */
#define WBA 0x10 /* Wakeup On CAN Bus Activity */
#define SMR 0x20 /* Sleep Mode Request */
#define CSR 0x40 /* CAN Suspend Mode Request */
#define CCR 0x80 /* CAN Configuration Mode Request */
/* Bit masks for CAN0_STATUS */
#define WT 0x1 /* CAN Transmit Warning Flag */
#define WR 0x2 /* CAN Receive Warning Flag */
#define EP 0x4 /* CAN Error Passive Mode */
#define EBO 0x8 /* CAN Error Bus Off Mode */
#define CSA 0x40 /* CAN Suspend Mode Acknowledge */
#define CCA 0x80 /* CAN Configuration Mode Acknowledge */
#define MBPTR 0x1f00 /* Mailbox Pointer */
#define TRM 0x4000 /* Transmit Mode Status */
#define REC 0x8000 /* Receive Mode Status */
/* Bit masks for CAN0_DEBUG */
#define DEC 0x1 /* Disable Transmit/Receive Error Counters */
#define DRI 0x2 /* Disable CANRX Input Pin */
#define DTO 0x4 /* Disable CANTX Output Pin */
#define DIL 0x8 /* Disable Internal Loop */
#define MAA 0x10 /* Mode Auto-Acknowledge */
#define MRB 0x20 /* Mode Read Back */
#define CDE 0x8000 /* CAN Debug Mode Enable */
/* Bit masks for CAN0_CLOCK */
#define BRP 0x3ff /* CAN Bit Rate Prescaler */
/* Bit masks for CAN0_TIMING */
#define SJW 0x300 /* Synchronization Jump Width */
#define SAM 0x80 /* Sampling */
#define TSEG2 0x70 /* Time Segment 2 */
#define TSEG1 0xf /* Time Segment 1 */
/* Bit masks for CAN0_INTR */
#define CANRX 0x80 /* Serial Input From Transceiver */
#define CANTX 0x40 /* Serial Output To Transceiver */
#define SMACK 0x8 /* Sleep Mode Acknowledge */
#define GIRQ 0x4 /* Global Interrupt Request Status */
#define MBTIRQ 0x2 /* Mailbox Transmit Interrupt Request */
#define MBRIRQ 0x1 /* Mailbox Receive Interrupt Request */
/* Bit masks for CAN0_GIM */
#define EWTIM 0x1 /* Error Warning Transmit Interrupt Mask */
#define EWRIM 0x2 /* Error Warning Receive Interrupt Mask */
#define EPIM 0x4 /* Error Passive Interrupt Mask */
#define BOIM 0x8 /* Bus Off Interrupt Mask */
#define WUIM 0x10 /* Wakeup Interrupt Mask */
#define UIAIM 0x20 /* Unimplemented Address Interrupt Mask */
#define AAIM 0x40 /* Abort Acknowledge Interrupt Mask */
#define RMLIM 0x80 /* Receive Message Lost Interrupt Mask */
#define UCEIM 0x100 /* Universal Counter Exceeded Interrupt Mask */
#define ADIM 0x400 /* Access Denied Interrupt Mask */
/* Bit masks for CAN0_GIS */
#define EWTIS 0x1 /* Error Warning Transmit Interrupt Status */
#define EWRIS 0x2 /* Error Warning Receive Interrupt Status */
#define EPIS 0x4 /* Error Passive Interrupt Status */
#define BOIS 0x8 /* Bus Off Interrupt Status */
#define WUIS 0x10 /* Wakeup Interrupt Status */
#define UIAIS 0x20 /* Unimplemented Address Interrupt Status */
#define AAIS 0x40 /* Abort Acknowledge Interrupt Status */
#define RMLIS 0x80 /* Receive Message Lost Interrupt Status */
#define UCEIS 0x100 /* Universal Counter Exceeded Interrupt Status */
#define ADIS 0x400 /* Access Denied Interrupt Status */
/* Bit masks for CAN0_GIF */
#define EWTIF 0x1 /* Error Warning Transmit Interrupt Flag */
#define EWRIF 0x2 /* Error Warning Receive Interrupt Flag */
#define EPIF 0x4 /* Error Passive Interrupt Flag */
#define BOIF 0x8 /* Bus Off Interrupt Flag */
#define WUIF 0x10 /* Wakeup Interrupt Flag */
#define UIAIF 0x20 /* Unimplemented Address Interrupt Flag */
#define AAIF 0x40 /* Abort Acknowledge Interrupt Flag */
#define RMLIF 0x80 /* Receive Message Lost Interrupt Flag */
#define UCEIF 0x100 /* Universal Counter Exceeded Interrupt Flag */
#define ADIF 0x400 /* Access Denied Interrupt Flag */
/* Bit masks for CAN0_MBTD */
#define TDR 0x80 /* Temporary Disable Request */
#define TDA 0x40 /* Temporary Disable Acknowledge */
#define TDPTR 0x1f /* Temporary Disable Pointer */
/* Bit masks for CAN0_UCCNF */
#define UCCNF 0xf /* Universal Counter Configuration */
#define UCRC 0x20 /* Universal Counter Reload/Clear */
#define UCCT 0x40 /* Universal Counter CAN Trigger */
#define UCE 0x80 /* Universal Counter Enable */
/* Bit masks for CAN0_CEC */
#define RXECNT 0xff /* Receive Error Counter */
#define TXECNT 0xff00 /* Transmit Error Counter */
/* Bit masks for CAN0_ESR */
#define FER 0x80 /* Form Error */
#define BEF 0x40 /* Bit Error Flag */
#define SA0 0x20 /* Stuck At Dominant */
#define CRCE 0x10 /* CRC Error */
#define SER 0x8 /* Stuff Bit Error */
#define ACKE 0x4 /* Acknowledge Error */
/* Bit masks for CAN0_EWR */
#define EWLTEC 0xff00 /* Transmit Error Warning Limit */
#define EWLREC 0xff /* Receive Error Warning Limit */
/* Bit masks for CAN0_AMxx_H */
#define FDF 0x8000 /* Filter On Data Field */
#define FMD 0x4000 /* Full Mask Data */
#define AMIDE 0x2000 /* Acceptance Mask Identifier Extension */
#define BASEID 0x1ffc /* Base Identifier */
#define EXTID_HI 0x3 /* Extended Identifier High Bits */
/* Bit masks for CAN0_AMxx_L */
#define EXTID_LO 0xffff /* Extended Identifier Low Bits */
#define DFM 0xffff /* Data Field Mask */
/* Bit masks for CAN0_MBxx_ID1 */
#define AME 0x8000 /* Acceptance Mask Enable */
#define RTR 0x4000 /* Remote Transmission Request */
#define IDE 0x2000 /* Identifier Extension */
#define BASEID 0x1ffc /* Base Identifier */
#define EXTID_HI 0x3 /* Extended Identifier High Bits */
/* Bit masks for CAN0_MBxx_ID0 */
#define EXTID_LO 0xffff /* Extended Identifier Low Bits */
#define DFM 0xffff /* Data Field Mask */
/* Bit masks for CAN0_MBxx_TIMESTAMP */
#define TSV 0xffff /* Time Stamp Value */
/* Bit masks for CAN0_MBxx_LENGTH */
#define DLC 0xf /* Data Length Code */
/* Bit masks for CAN0_MBxx_DATA3 */
#define CAN_BYTE0 0xff00 /* Data Field Byte 0 */
#define CAN_BYTE1 0xff /* Data Field Byte 1 */
/* Bit masks for CAN0_MBxx_DATA2 */
#define CAN_BYTE2 0xff00 /* Data Field Byte 2 */
#define CAN_BYTE3 0xff /* Data Field Byte 3 */
/* Bit masks for CAN0_MBxx_DATA1 */
#define CAN_BYTE4 0xff00 /* Data Field Byte 4 */
#define CAN_BYTE5 0xff /* Data Field Byte 5 */
/* Bit masks for CAN0_MBxx_DATA0 */
#define CAN_BYTE6 0xff00 /* Data Field Byte 6 */
#define CAN_BYTE7 0xff /* Data Field Byte 7 */
/* Bit masks for CAN0_MC1 */
#define MC0 0x1 /* Mailbox 0 Enable */
#define MC1 0x2 /* Mailbox 1 Enable */
#define MC2 0x4 /* Mailbox 2 Enable */
#define MC3 0x8 /* Mailbox 3 Enable */
#define MC4 0x10 /* Mailbox 4 Enable */
#define MC5 0x20 /* Mailbox 5 Enable */
#define MC6 0x40 /* Mailbox 6 Enable */
#define MC7 0x80 /* Mailbox 7 Enable */
#define MC8 0x100 /* Mailbox 8 Enable */
#define MC9 0x200 /* Mailbox 9 Enable */
#define MC10 0x400 /* Mailbox 10 Enable */
#define MC11 0x800 /* Mailbox 11 Enable */
#define MC12 0x1000 /* Mailbox 12 Enable */
#define MC13 0x2000 /* Mailbox 13 Enable */
#define MC14 0x4000 /* Mailbox 14 Enable */
#define MC15 0x8000 /* Mailbox 15 Enable */
/* Bit masks for CAN0_MC2 */
#define MC16 0x1 /* Mailbox 16 Enable */
#define MC17 0x2 /* Mailbox 17 Enable */
#define MC18 0x4 /* Mailbox 18 Enable */
#define MC19 0x8 /* Mailbox 19 Enable */
#define MC20 0x10 /* Mailbox 20 Enable */
#define MC21 0x20 /* Mailbox 21 Enable */
#define MC22 0x40 /* Mailbox 22 Enable */
#define MC23 0x80 /* Mailbox 23 Enable */
#define MC24 0x100 /* Mailbox 24 Enable */
#define MC25 0x200 /* Mailbox 25 Enable */
#define MC26 0x400 /* Mailbox 26 Enable */
#define MC27 0x800 /* Mailbox 27 Enable */
#define MC28 0x1000 /* Mailbox 28 Enable */
#define MC29 0x2000 /* Mailbox 29 Enable */
#define MC30 0x4000 /* Mailbox 30 Enable */
#define MC31 0x8000 /* Mailbox 31 Enable */
/* Bit masks for CAN0_MD1 */
#define MD0 0x1 /* Mailbox 0 Receive Enable */
#define MD1 0x2 /* Mailbox 1 Receive Enable */
#define MD2 0x4 /* Mailbox 2 Receive Enable */
#define MD3 0x8 /* Mailbox 3 Receive Enable */
#define MD4 0x10 /* Mailbox 4 Receive Enable */
#define MD5 0x20 /* Mailbox 5 Receive Enable */
#define MD6 0x40 /* Mailbox 6 Receive Enable */
#define MD7 0x80 /* Mailbox 7 Receive Enable */
#define MD8 0x100 /* Mailbox 8 Receive Enable */
#define MD9 0x200 /* Mailbox 9 Receive Enable */
#define MD10 0x400 /* Mailbox 10 Receive Enable */
#define MD11 0x800 /* Mailbox 11 Receive Enable */
#define MD12 0x1000 /* Mailbox 12 Receive Enable */
#define MD13 0x2000 /* Mailbox 13 Receive Enable */
#define MD14 0x4000 /* Mailbox 14 Receive Enable */
#define MD15 0x8000 /* Mailbox 15 Receive Enable */
/* Bit masks for CAN0_MD2 */
#define MD16 0x1 /* Mailbox 16 Receive Enable */
#define MD17 0x2 /* Mailbox 17 Receive Enable */
#define MD18 0x4 /* Mailbox 18 Receive Enable */
#define MD19 0x8 /* Mailbox 19 Receive Enable */
#define MD20 0x10 /* Mailbox 20 Receive Enable */
#define MD21 0x20 /* Mailbox 21 Receive Enable */
#define MD22 0x40 /* Mailbox 22 Receive Enable */
#define MD23 0x80 /* Mailbox 23 Receive Enable */
#define MD24 0x100 /* Mailbox 24 Receive Enable */
#define MD25 0x200 /* Mailbox 25 Receive Enable */
#define MD26 0x400 /* Mailbox 26 Receive Enable */
#define MD27 0x800 /* Mailbox 27 Receive Enable */
#define MD28 0x1000 /* Mailbox 28 Receive Enable */
#define MD29 0x2000 /* Mailbox 29 Receive Enable */
#define MD30 0x4000 /* Mailbox 30 Receive Enable */
#define MD31 0x8000 /* Mailbox 31 Receive Enable */
/* Bit masks for CAN0_RMP1 */
#define RMP0 0x1 /* Mailbox 0 Receive Message Pending */
#define RMP1 0x2 /* Mailbox 1 Receive Message Pending */
#define RMP2 0x4 /* Mailbox 2 Receive Message Pending */
#define RMP3 0x8 /* Mailbox 3 Receive Message Pending */
#define RMP4 0x10 /* Mailbox 4 Receive Message Pending */
#define RMP5 0x20 /* Mailbox 5 Receive Message Pending */
#define RMP6 0x40 /* Mailbox 6 Receive Message Pending */
#define RMP7 0x80 /* Mailbox 7 Receive Message Pending */
#define RMP8 0x100 /* Mailbox 8 Receive Message Pending */
#define RMP9 0x200 /* Mailbox 9 Receive Message Pending */
#define RMP10 0x400 /* Mailbox 10 Receive Message Pending */
#define RMP11 0x800 /* Mailbox 11 Receive Message Pending */
#define RMP12 0x1000 /* Mailbox 12 Receive Message Pending */
#define RMP13 0x2000 /* Mailbox 13 Receive Message Pending */
#define RMP14 0x4000 /* Mailbox 14 Receive Message Pending */
#define RMP15 0x8000 /* Mailbox 15 Receive Message Pending */
/* Bit masks for CAN0_RMP2 */
#define RMP16 0x1 /* Mailbox 16 Receive Message Pending */
#define RMP17 0x2 /* Mailbox 17 Receive Message Pending */
#define RMP18 0x4 /* Mailbox 18 Receive Message Pending */
#define RMP19 0x8 /* Mailbox 19 Receive Message Pending */
#define RMP20 0x10 /* Mailbox 20 Receive Message Pending */
#define RMP21 0x20 /* Mailbox 21 Receive Message Pending */
#define RMP22 0x40 /* Mailbox 22 Receive Message Pending */
#define RMP23 0x80 /* Mailbox 23 Receive Message Pending */
#define RMP24 0x100 /* Mailbox 24 Receive Message Pending */
#define RMP25 0x200 /* Mailbox 25 Receive Message Pending */
#define RMP26 0x400 /* Mailbox 26 Receive Message Pending */
#define RMP27 0x800 /* Mailbox 27 Receive Message Pending */
#define RMP28 0x1000 /* Mailbox 28 Receive Message Pending */
#define RMP29 0x2000 /* Mailbox 29 Receive Message Pending */
#define RMP30 0x4000 /* Mailbox 30 Receive Message Pending */
#define RMP31 0x8000 /* Mailbox 31 Receive Message Pending */
/* Bit masks for CAN0_RML1 */
#define RML0 0x1 /* Mailbox 0 Receive Message Lost */
#define RML1 0x2 /* Mailbox 1 Receive Message Lost */
#define RML2 0x4 /* Mailbox 2 Receive Message Lost */
#define RML3 0x8 /* Mailbox 3 Receive Message Lost */
#define RML4 0x10 /* Mailbox 4 Receive Message Lost */
#define RML5 0x20 /* Mailbox 5 Receive Message Lost */
#define RML6 0x40 /* Mailbox 6 Receive Message Lost */
#define RML7 0x80 /* Mailbox 7 Receive Message Lost */
#define RML8 0x100 /* Mailbox 8 Receive Message Lost */
#define RML9 0x200 /* Mailbox 9 Receive Message Lost */
#define RML10 0x400 /* Mailbox 10 Receive Message Lost */
#define RML11 0x800 /* Mailbox 11 Receive Message Lost */
#define RML12 0x1000 /* Mailbox 12 Receive Message Lost */
#define RML13 0x2000 /* Mailbox 13 Receive Message Lost */
#define RML14 0x4000 /* Mailbox 14 Receive Message Lost */
#define RML15 0x8000 /* Mailbox 15 Receive Message Lost */
/* Bit masks for CAN0_RML2 */
#define RML16 0x1 /* Mailbox 16 Receive Message Lost */
#define RML17 0x2 /* Mailbox 17 Receive Message Lost */
#define RML18 0x4 /* Mailbox 18 Receive Message Lost */
#define RML19 0x8 /* Mailbox 19 Receive Message Lost */
#define RML20 0x10 /* Mailbox 20 Receive Message Lost */
#define RML21 0x20 /* Mailbox 21 Receive Message Lost */
#define RML22 0x40 /* Mailbox 22 Receive Message Lost */
#define RML23 0x80 /* Mailbox 23 Receive Message Lost */
#define RML24 0x100 /* Mailbox 24 Receive Message Lost */
#define RML25 0x200 /* Mailbox 25 Receive Message Lost */
#define RML26 0x400 /* Mailbox 26 Receive Message Lost */
#define RML27 0x800 /* Mailbox 27 Receive Message Lost */
#define RML28 0x1000 /* Mailbox 28 Receive Message Lost */
#define RML29 0x2000 /* Mailbox 29 Receive Message Lost */
#define RML30 0x4000 /* Mailbox 30 Receive Message Lost */
#define RML31 0x8000 /* Mailbox 31 Receive Message Lost */
/* Bit masks for CAN0_OPSS1 */
#define OPSS0 0x1 /* Mailbox 0 Overwrite Protection/Single-Shot Transmission Enable */
#define OPSS1 0x2 /* Mailbox 1 Overwrite Protection/Single-Shot Transmission Enable */
#define OPSS2 0x4 /* Mailbox 2 Overwrite Protection/Single-Shot Transmission Enable */
#define OPSS3 0x8 /* Mailbox 3 Overwrite Protection/Single-Shot Transmission Enable */
#define OPSS4 0x10 /* Mailbox 4 Overwrite Protection/Single-Shot Transmission Enable */
#define OPSS5 0x20 /* Mailbox 5 Overwrite Protection/Single-Shot Transmission Enable */
#define OPSS6 0x40 /* Mailbox 6 Overwrite Protection/Single-Shot Transmission Enable */
#define OPSS7 0x80 /* Mailbox 7 Overwrite Protection/Single-Shot Transmission Enable */
#define OPSS8 0x100 /* Mailbox 8 Overwrite Protection/Single-Shot Transmission Enable */
#define OPSS9 0x200 /* Mailbox 9 Overwrite Protection/Single-Shot Transmission Enable */
#define OPSS10 0x400 /* Mailbox 10 Overwrite Protection/Single-Shot Transmission Enable */
#define OPSS11 0x800 /* Mailbox 11 Overwrite Protection/Single-Shot Transmission Enable */
#define OPSS12 0x1000 /* Mailbox 12 Overwrite Protection/Single-Shot Transmission Enable */
#define OPSS13 0x2000 /* Mailbox 13 Overwrite Protection/Single-Shot Transmission Enable */
#define OPSS14 0x4000 /* Mailbox 14 Overwrite Protection/Single-Shot Transmission Enable */
#define OPSS15 0x8000 /* Mailbox 15 Overwrite Protection/Single-Shot Transmission Enable */
/* Bit masks for CAN0_OPSS2 */
#define OPSS16 0x1 /* Mailbox 16 Overwrite Protection/Single-Shot Transmission Enable */
#define OPSS17 0x2 /* Mailbox 17 Overwrite Protection/Single-Shot Transmission Enable */
#define OPSS18 0x4 /* Mailbox 18 Overwrite Protection/Single-Shot Transmission Enable */
#define OPSS19 0x8 /* Mailbox 19 Overwrite Protection/Single-Shot Transmission Enable */
#define OPSS20 0x10 /* Mailbox 20 Overwrite Protection/Single-Shot Transmission Enable */
#define OPSS21 0x20 /* Mailbox 21 Overwrite Protection/Single-Shot Transmission Enable */
#define OPSS22 0x40 /* Mailbox 22 Overwrite Protection/Single-Shot Transmission Enable */
#define OPSS23 0x80 /* Mailbox 23 Overwrite Protection/Single-Shot Transmission Enable */
#define OPSS24 0x100 /* Mailbox 24 Overwrite Protection/Single-Shot Transmission Enable */
#define OPSS25 0x200 /* Mailbox 25 Overwrite Protection/Single-Shot Transmission Enable */
#define OPSS26 0x400 /* Mailbox 26 Overwrite Protection/Single-Shot Transmission Enable */
#define OPSS27 0x800 /* Mailbox 27 Overwrite Protection/Single-Shot Transmission Enable */
#define OPSS28 0x1000 /* Mailbox 28 Overwrite Protection/Single-Shot Transmission Enable */
#define OPSS29 0x2000 /* Mailbox 29 Overwrite Protection/Single-Shot Transmission Enable */
#define OPSS30 0x4000 /* Mailbox 30 Overwrite Protection/Single-Shot Transmission Enable */
#define OPSS31 0x8000 /* Mailbox 31 Overwrite Protection/Single-Shot Transmission Enable */
/* Bit masks for CAN0_TRS1 */
#define TRS0 0x1 /* Mailbox 0 Transmit Request Set */
#define TRS1 0x2 /* Mailbox 1 Transmit Request Set */
#define TRS2 0x4 /* Mailbox 2 Transmit Request Set */
#define TRS3 0x8 /* Mailbox 3 Transmit Request Set */
#define TRS4 0x10 /* Mailbox 4 Transmit Request Set */
#define TRS5 0x20 /* Mailbox 5 Transmit Request Set */
#define TRS6 0x40 /* Mailbox 6 Transmit Request Set */
#define TRS7 0x80 /* Mailbox 7 Transmit Request Set */
#define TRS8 0x100 /* Mailbox 8 Transmit Request Set */
#define TRS9 0x200 /* Mailbox 9 Transmit Request Set */
#define TRS10 0x400 /* Mailbox 10 Transmit Request Set */
#define TRS11 0x800 /* Mailbox 11 Transmit Request Set */
#define TRS12 0x1000 /* Mailbox 12 Transmit Request Set */
#define TRS13 0x2000 /* Mailbox 13 Transmit Request Set */
#define TRS14 0x4000 /* Mailbox 14 Transmit Request Set */
#define TRS15 0x8000 /* Mailbox 15 Transmit Request Set */
/* Bit masks for CAN0_TRS2 */
#define TRS16 0x1 /* Mailbox 16 Transmit Request Set */
#define TRS17 0x2 /* Mailbox 17 Transmit Request Set */
#define TRS18 0x4 /* Mailbox 18 Transmit Request Set */
#define TRS19 0x8 /* Mailbox 19 Transmit Request Set */
#define TRS20 0x10 /* Mailbox 20 Transmit Request Set */
#define TRS21 0x20 /* Mailbox 21 Transmit Request Set */
#define TRS22 0x40 /* Mailbox 22 Transmit Request Set */
#define TRS23 0x80 /* Mailbox 23 Transmit Request Set */
#define TRS24 0x100 /* Mailbox 24 Transmit Request Set */
#define TRS25 0x200 /* Mailbox 25 Transmit Request Set */
#define TRS26 0x400 /* Mailbox 26 Transmit Request Set */
#define TRS27 0x800 /* Mailbox 27 Transmit Request Set */
#define TRS28 0x1000 /* Mailbox 28 Transmit Request Set */
#define TRS29 0x2000 /* Mailbox 29 Transmit Request Set */
#define TRS30 0x4000 /* Mailbox 30 Transmit Request Set */
#define TRS31 0x8000 /* Mailbox 31 Transmit Request Set */
/* Bit masks for CAN0_TRR1 */
#define TRR0 0x1 /* Mailbox 0 Transmit Request Reset */
#define TRR1 0x2 /* Mailbox 1 Transmit Request Reset */
#define TRR2 0x4 /* Mailbox 2 Transmit Request Reset */
#define TRR3 0x8 /* Mailbox 3 Transmit Request Reset */
#define TRR4 0x10 /* Mailbox 4 Transmit Request Reset */
#define TRR5 0x20 /* Mailbox 5 Transmit Request Reset */
#define TRR6 0x40 /* Mailbox 6 Transmit Request Reset */
#define TRR7 0x80 /* Mailbox 7 Transmit Request Reset */
#define TRR8 0x100 /* Mailbox 8 Transmit Request Reset */
#define TRR9 0x200 /* Mailbox 9 Transmit Request Reset */
#define TRR10 0x400 /* Mailbox 10 Transmit Request Reset */
#define TRR11 0x800 /* Mailbox 11 Transmit Request Reset */
#define TRR12 0x1000 /* Mailbox 12 Transmit Request Reset */
#define TRR13 0x2000 /* Mailbox 13 Transmit Request Reset */
#define TRR14 0x4000 /* Mailbox 14 Transmit Request Reset */
#define TRR15 0x8000 /* Mailbox 15 Transmit Request Reset */
/* Bit masks for CAN0_TRR2 */
#define TRR16 0x1 /* Mailbox 16 Transmit Request Reset */
#define TRR17 0x2 /* Mailbox 17 Transmit Request Reset */
#define TRR18 0x4 /* Mailbox 18 Transmit Request Reset */
#define TRR19 0x8 /* Mailbox 19 Transmit Request Reset */
#define TRR20 0x10 /* Mailbox 20 Transmit Request Reset */
#define TRR21 0x20 /* Mailbox 21 Transmit Request Reset */
#define TRR22 0x40 /* Mailbox 22 Transmit Request Reset */
#define TRR23 0x80 /* Mailbox 23 Transmit Request Reset */
#define TRR24 0x100 /* Mailbox 24 Transmit Request Reset */
#define TRR25 0x200 /* Mailbox 25 Transmit Request Reset */
#define TRR26 0x400 /* Mailbox 26 Transmit Request Reset */
#define TRR27 0x800 /* Mailbox 27 Transmit Request Reset */
#define TRR28 0x1000 /* Mailbox 28 Transmit Request Reset */
#define TRR29 0x2000 /* Mailbox 29 Transmit Request Reset */
#define TRR30 0x4000 /* Mailbox 30 Transmit Request Reset */
#define TRR31 0x8000 /* Mailbox 31 Transmit Request Reset */
/* Bit masks for CAN0_AA1 */
#define AA0 0x1 /* Mailbox 0 Abort Acknowledge */
#define AA1 0x2 /* Mailbox 1 Abort Acknowledge */
#define AA2 0x4 /* Mailbox 2 Abort Acknowledge */
#define AA3 0x8 /* Mailbox 3 Abort Acknowledge */
#define AA4 0x10 /* Mailbox 4 Abort Acknowledge */
#define AA5 0x20 /* Mailbox 5 Abort Acknowledge */
#define AA6 0x40 /* Mailbox 6 Abort Acknowledge */
#define AA7 0x80 /* Mailbox 7 Abort Acknowledge */
#define AA8 0x100 /* Mailbox 8 Abort Acknowledge */
#define AA9 0x200 /* Mailbox 9 Abort Acknowledge */
#define AA10 0x400 /* Mailbox 10 Abort Acknowledge */
#define AA11 0x800 /* Mailbox 11 Abort Acknowledge */
#define AA12 0x1000 /* Mailbox 12 Abort Acknowledge */
#define AA13 0x2000 /* Mailbox 13 Abort Acknowledge */
#define AA14 0x4000 /* Mailbox 14 Abort Acknowledge */
#define AA15 0x8000 /* Mailbox 15 Abort Acknowledge */
/* Bit masks for CAN0_AA2 */
#define AA16 0x1 /* Mailbox 16 Abort Acknowledge */
#define AA17 0x2 /* Mailbox 17 Abort Acknowledge */
#define AA18 0x4 /* Mailbox 18 Abort Acknowledge */
#define AA19 0x8 /* Mailbox 19 Abort Acknowledge */
#define AA20 0x10 /* Mailbox 20 Abort Acknowledge */
#define AA21 0x20 /* Mailbox 21 Abort Acknowledge */
#define AA22 0x40 /* Mailbox 22 Abort Acknowledge */
#define AA23 0x80 /* Mailbox 23 Abort Acknowledge */
#define AA24 0x100 /* Mailbox 24 Abort Acknowledge */
#define AA25 0x200 /* Mailbox 25 Abort Acknowledge */
#define AA26 0x400 /* Mailbox 26 Abort Acknowledge */
#define AA27 0x800 /* Mailbox 27 Abort Acknowledge */
#define AA28 0x1000 /* Mailbox 28 Abort Acknowledge */
#define AA29 0x2000 /* Mailbox 29 Abort Acknowledge */
#define AA30 0x4000 /* Mailbox 30 Abort Acknowledge */
#define AA31 0x8000 /* Mailbox 31 Abort Acknowledge */
/* Bit masks for CAN0_TA1 */
#define TA0 0x1 /* Mailbox 0 Transmit Acknowledge */
#define TA1 0x2 /* Mailbox 1 Transmit Acknowledge */
#define TA2 0x4 /* Mailbox 2 Transmit Acknowledge */
#define TA3 0x8 /* Mailbox 3 Transmit Acknowledge */
#define TA4 0x10 /* Mailbox 4 Transmit Acknowledge */
#define TA5 0x20 /* Mailbox 5 Transmit Acknowledge */
#define TA6 0x40 /* Mailbox 6 Transmit Acknowledge */
#define TA7 0x80 /* Mailbox 7 Transmit Acknowledge */
#define TA8 0x100 /* Mailbox 8 Transmit Acknowledge */
#define TA9 0x200 /* Mailbox 9 Transmit Acknowledge */
#define TA10 0x400 /* Mailbox 10 Transmit Acknowledge */
#define TA11 0x800 /* Mailbox 11 Transmit Acknowledge */
#define TA12 0x1000 /* Mailbox 12 Transmit Acknowledge */
#define TA13 0x2000 /* Mailbox 13 Transmit Acknowledge */
#define TA14 0x4000 /* Mailbox 14 Transmit Acknowledge */
#define TA15 0x8000 /* Mailbox 15 Transmit Acknowledge */
/* Bit masks for CAN0_TA2 */
#define TA16 0x1 /* Mailbox 16 Transmit Acknowledge */
#define TA17 0x2 /* Mailbox 17 Transmit Acknowledge */
#define TA18 0x4 /* Mailbox 18 Transmit Acknowledge */
#define TA19 0x8 /* Mailbox 19 Transmit Acknowledge */
#define TA20 0x10 /* Mailbox 20 Transmit Acknowledge */
#define TA21 0x20 /* Mailbox 21 Transmit Acknowledge */
#define TA22 0x40 /* Mailbox 22 Transmit Acknowledge */
#define TA23 0x80 /* Mailbox 23 Transmit Acknowledge */
#define TA24 0x100 /* Mailbox 24 Transmit Acknowledge */
#define TA25 0x200 /* Mailbox 25 Transmit Acknowledge */
#define TA26 0x400 /* Mailbox 26 Transmit Acknowledge */
#define TA27 0x800 /* Mailbox 27 Transmit Acknowledge */
#define TA28 0x1000 /* Mailbox 28 Transmit Acknowledge */
#define TA29 0x2000 /* Mailbox 29 Transmit Acknowledge */
#define TA30 0x4000 /* Mailbox 30 Transmit Acknowledge */
#define TA31 0x8000 /* Mailbox 31 Transmit Acknowledge */
/* Bit masks for CAN0_RFH1 */
#define RFH0 0x1 /* Mailbox 0 Remote Frame Handling Enable */
#define RFH1 0x2 /* Mailbox 1 Remote Frame Handling Enable */
#define RFH2 0x4 /* Mailbox 2 Remote Frame Handling Enable */
#define RFH3 0x8 /* Mailbox 3 Remote Frame Handling Enable */
#define RFH4 0x10 /* Mailbox 4 Remote Frame Handling Enable */
#define RFH5 0x20 /* Mailbox 5 Remote Frame Handling Enable */
#define RFH6 0x40 /* Mailbox 6 Remote Frame Handling Enable */
#define RFH7 0x80 /* Mailbox 7 Remote Frame Handling Enable */
#define RFH8 0x100 /* Mailbox 8 Remote Frame Handling Enable */
#define RFH9 0x200 /* Mailbox 9 Remote Frame Handling Enable */
#define RFH10 0x400 /* Mailbox 10 Remote Frame Handling Enable */
#define RFH11 0x800 /* Mailbox 11 Remote Frame Handling Enable */
#define RFH12 0x1000 /* Mailbox 12 Remote Frame Handling Enable */
#define RFH13 0x2000 /* Mailbox 13 Remote Frame Handling Enable */
#define RFH14 0x4000 /* Mailbox 14 Remote Frame Handling Enable */
#define RFH15 0x8000 /* Mailbox 15 Remote Frame Handling Enable */
/* Bit masks for CAN0_RFH2 */
#define RFH16 0x1 /* Mailbox 16 Remote Frame Handling Enable */
#define RFH17 0x2 /* Mailbox 17 Remote Frame Handling Enable */
#define RFH18 0x4 /* Mailbox 18 Remote Frame Handling Enable */
#define RFH19 0x8 /* Mailbox 19 Remote Frame Handling Enable */
#define RFH20 0x10 /* Mailbox 20 Remote Frame Handling Enable */
#define RFH21 0x20 /* Mailbox 21 Remote Frame Handling Enable */
#define RFH22 0x40 /* Mailbox 22 Remote Frame Handling Enable */
#define RFH23 0x80 /* Mailbox 23 Remote Frame Handling Enable */
#define RFH24 0x100 /* Mailbox 24 Remote Frame Handling Enable */
#define RFH25 0x200 /* Mailbox 25 Remote Frame Handling Enable */
#define RFH26 0x400 /* Mailbox 26 Remote Frame Handling Enable */
#define RFH27 0x800 /* Mailbox 27 Remote Frame Handling Enable */
#define RFH28 0x1000 /* Mailbox 28 Remote Frame Handling Enable */
#define RFH29 0x2000 /* Mailbox 29 Remote Frame Handling Enable */
#define RFH30 0x4000 /* Mailbox 30 Remote Frame Handling Enable */
#define RFH31 0x8000 /* Mailbox 31 Remote Frame Handling Enable */
/* Bit masks for CAN0_MBIM1 */
#define MBIM0 0x1 /* Mailbox 0 Mailbox Interrupt Mask */
#define MBIM1 0x2 /* Mailbox 1 Mailbox Interrupt Mask */
#define MBIM2 0x4 /* Mailbox 2 Mailbox Interrupt Mask */
#define MBIM3 0x8 /* Mailbox 3 Mailbox Interrupt Mask */
#define MBIM4 0x10 /* Mailbox 4 Mailbox Interrupt Mask */
#define MBIM5 0x20 /* Mailbox 5 Mailbox Interrupt Mask */
#define MBIM6 0x40 /* Mailbox 6 Mailbox Interrupt Mask */
#define MBIM7 0x80 /* Mailbox 7 Mailbox Interrupt Mask */
#define MBIM8 0x100 /* Mailbox 8 Mailbox Interrupt Mask */
#define MBIM9 0x200 /* Mailbox 9 Mailbox Interrupt Mask */
#define MBIM10 0x400 /* Mailbox 10 Mailbox Interrupt Mask */
#define MBIM11 0x800 /* Mailbox 11 Mailbox Interrupt Mask */
#define MBIM12 0x1000 /* Mailbox 12 Mailbox Interrupt Mask */
#define MBIM13 0x2000 /* Mailbox 13 Mailbox Interrupt Mask */
#define MBIM14 0x4000 /* Mailbox 14 Mailbox Interrupt Mask */
#define MBIM15 0x8000 /* Mailbox 15 Mailbox Interrupt Mask */
/* Bit masks for CAN0_MBIM2 */
#define MBIM16 0x1 /* Mailbox 16 Mailbox Interrupt Mask */
#define MBIM17 0x2 /* Mailbox 17 Mailbox Interrupt Mask */
#define MBIM18 0x4 /* Mailbox 18 Mailbox Interrupt Mask */
#define MBIM19 0x8 /* Mailbox 19 Mailbox Interrupt Mask */
#define MBIM20 0x10 /* Mailbox 20 Mailbox Interrupt Mask */
#define MBIM21 0x20 /* Mailbox 21 Mailbox Interrupt Mask */
#define MBIM22 0x40 /* Mailbox 22 Mailbox Interrupt Mask */
#define MBIM23 0x80 /* Mailbox 23 Mailbox Interrupt Mask */
#define MBIM24 0x100 /* Mailbox 24 Mailbox Interrupt Mask */
#define MBIM25 0x200 /* Mailbox 25 Mailbox Interrupt Mask */
#define MBIM26 0x400 /* Mailbox 26 Mailbox Interrupt Mask */
#define MBIM27 0x800 /* Mailbox 27 Mailbox Interrupt Mask */
#define MBIM28 0x1000 /* Mailbox 28 Mailbox Interrupt Mask */
#define MBIM29 0x2000 /* Mailbox 29 Mailbox Interrupt Mask */
#define MBIM30 0x4000 /* Mailbox 30 Mailbox Interrupt Mask */
#define MBIM31 0x8000 /* Mailbox 31 Mailbox Interrupt Mask */
/* Bit masks for CAN0_MBTIF1 */
#define MBTIF0 0x1 /* Mailbox 0 Mailbox Transmit Interrupt Flag */
#define MBTIF1 0x2 /* Mailbox 1 Mailbox Transmit Interrupt Flag */
#define MBTIF2 0x4 /* Mailbox 2 Mailbox Transmit Interrupt Flag */
#define MBTIF3 0x8 /* Mailbox 3 Mailbox Transmit Interrupt Flag */
#define MBTIF4 0x10 /* Mailbox 4 Mailbox Transmit Interrupt Flag */
#define MBTIF5 0x20 /* Mailbox 5 Mailbox Transmit Interrupt Flag */
#define MBTIF6 0x40 /* Mailbox 6 Mailbox Transmit Interrupt Flag */
#define MBTIF7 0x80 /* Mailbox 7 Mailbox Transmit Interrupt Flag */
#define MBTIF8 0x100 /* Mailbox 8 Mailbox Transmit Interrupt Flag */
#define MBTIF9 0x200 /* Mailbox 9 Mailbox Transmit Interrupt Flag */
#define MBTIF10 0x400 /* Mailbox 10 Mailbox Transmit Interrupt Flag */
#define MBTIF11 0x800 /* Mailbox 11 Mailbox Transmit Interrupt Flag */
#define MBTIF12 0x1000 /* Mailbox 12 Mailbox Transmit Interrupt Flag */
#define MBTIF13 0x2000 /* Mailbox 13 Mailbox Transmit Interrupt Flag */
#define MBTIF14 0x4000 /* Mailbox 14 Mailbox Transmit Interrupt Flag */
#define MBTIF15 0x8000 /* Mailbox 15 Mailbox Transmit Interrupt Flag */
/* Bit masks for CAN0_MBTIF2 */
#define MBTIF16 0x1 /* Mailbox 16 Mailbox Transmit Interrupt Flag */
#define MBTIF17 0x2 /* Mailbox 17 Mailbox Transmit Interrupt Flag */
#define MBTIF18 0x4 /* Mailbox 18 Mailbox Transmit Interrupt Flag */
#define MBTIF19 0x8 /* Mailbox 19 Mailbox Transmit Interrupt Flag */
#define MBTIF20 0x10 /* Mailbox 20 Mailbox Transmit Interrupt Flag */
#define MBTIF21 0x20 /* Mailbox 21 Mailbox Transmit Interrupt Flag */
#define MBTIF22 0x40 /* Mailbox 22 Mailbox Transmit Interrupt Flag */
#define MBTIF23 0x80 /* Mailbox 23 Mailbox Transmit Interrupt Flag */
#define MBTIF24 0x100 /* Mailbox 24 Mailbox Transmit Interrupt Flag */
#define MBTIF25 0x200 /* Mailbox 25 Mailbox Transmit Interrupt Flag */
#define MBTIF26 0x400 /* Mailbox 26 Mailbox Transmit Interrupt Flag */
#define MBTIF27 0x800 /* Mailbox 27 Mailbox Transmit Interrupt Flag */
#define MBTIF28 0x1000 /* Mailbox 28 Mailbox Transmit Interrupt Flag */
#define MBTIF29 0x2000 /* Mailbox 29 Mailbox Transmit Interrupt Flag */
#define MBTIF30 0x4000 /* Mailbox 30 Mailbox Transmit Interrupt Flag */
#define MBTIF31 0x8000 /* Mailbox 31 Mailbox Transmit Interrupt Flag */
/* Bit masks for CAN0_MBRIF1 */
#define MBRIF0 0x1 /* Mailbox 0 Mailbox Receive Interrupt Flag */
#define MBRIF1 0x2 /* Mailbox 1 Mailbox Receive Interrupt Flag */
#define MBRIF2 0x4 /* Mailbox 2 Mailbox Receive Interrupt Flag */
#define MBRIF3 0x8 /* Mailbox 3 Mailbox Receive Interrupt Flag */
#define MBRIF4 0x10 /* Mailbox 4 Mailbox Receive Interrupt Flag */
#define MBRIF5 0x20 /* Mailbox 5 Mailbox Receive Interrupt Flag */
#define MBRIF6 0x40 /* Mailbox 6 Mailbox Receive Interrupt Flag */
#define MBRIF7 0x80 /* Mailbox 7 Mailbox Receive Interrupt Flag */
#define MBRIF8 0x100 /* Mailbox 8 Mailbox Receive Interrupt Flag */
#define MBRIF9 0x200 /* Mailbox 9 Mailbox Receive Interrupt Flag */
#define MBRIF10 0x400 /* Mailbox 10 Mailbox Receive Interrupt Flag */
#define MBRIF11 0x800 /* Mailbox 11 Mailbox Receive Interrupt Flag */
#define MBRIF12 0x1000 /* Mailbox 12 Mailbox Receive Interrupt Flag */
#define MBRIF13 0x2000 /* Mailbox 13 Mailbox Receive Interrupt Flag */
#define MBRIF14 0x4000 /* Mailbox 14 Mailbox Receive Interrupt Flag */
#define MBRIF15 0x8000 /* Mailbox 15 Mailbox Receive Interrupt Flag */
/* Bit masks for CAN0_MBRIF2 */
#define MBRIF16 0x1 /* Mailbox 16 Mailbox Receive Interrupt Flag */
#define MBRIF17 0x2 /* Mailbox 17 Mailbox Receive Interrupt Flag */
#define MBRIF18 0x4 /* Mailbox 18 Mailbox Receive Interrupt Flag */
#define MBRIF19 0x8 /* Mailbox 19 Mailbox Receive Interrupt Flag */
#define MBRIF20 0x10 /* Mailbox 20 Mailbox Receive Interrupt Flag */
#define MBRIF21 0x20 /* Mailbox 21 Mailbox Receive Interrupt Flag */
#define MBRIF22 0x40 /* Mailbox 22 Mailbox Receive Interrupt Flag */
#define MBRIF23 0x80 /* Mailbox 23 Mailbox Receive Interrupt Flag */
#define MBRIF24 0x100 /* Mailbox 24 Mailbox Receive Interrupt Flag */
#define MBRIF25 0x200 /* Mailbox 25 Mailbox Receive Interrupt Flag */
#define MBRIF26 0x400 /* Mailbox 26 Mailbox Receive Interrupt Flag */
#define MBRIF27 0x800 /* Mailbox 27 Mailbox Receive Interrupt Flag */
#define MBRIF28 0x1000 /* Mailbox 28 Mailbox Receive Interrupt Flag */
#define MBRIF29 0x2000 /* Mailbox 29 Mailbox Receive Interrupt Flag */
#define MBRIF30 0x4000 /* Mailbox 30 Mailbox Receive Interrupt Flag */
#define MBRIF31 0x8000 /* Mailbox 31 Mailbox Receive Interrupt Flag */
/* Bit masks for EPPIx_STATUS */
#define CFIFO_ERR 0x1 /* Chroma FIFO Error */
......
arch/blackfin/mach-bf561/boards/acvilon.c
View file @ 064e297c
......@@ -44,6 +44,7 @@
#include <linux/spi/flash.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/jiffies.h>
#include <linux/i2c-pca-platform.h>
#include <linux/delay.h>
#include <linux/io.h>
......@@ -112,7 +113,7 @@ static struct resource bfin_i2c_pca_resources[] = {
struct i2c_pca9564_pf_platform_data pca9564_platform_data = {
.gpio = -1,
.i2c_clock_speed = 330000,
.timeout = 10000
.timeout = HZ,
};
/* PCA9564 I2C Bus driver */
......
arch/blackfin/mach-common/ints-priority.c
View file @ 064e297c
......@@ -92,26 +92,29 @@ static void __init search_IAR(void)
{
unsigned ivg, irq_pos = 0;
for (ivg = 0; ivg <= IVG13 - IVG7; ivg++) {
int irqn;
int irqN;
ivg7_13[ivg].istop = ivg7_13[ivg].ifirst = &ivg_table[irq_pos];
for (irqn = 0; irqn < NR_PERI_INTS; irqn++) {
int iar_shift = (irqn & 7) * 4;
if (ivg == (0xf &
#if defined(CONFIG_BF52x) || defined(CONFIG_BF538) \
|| defined(CONFIG_BF539) || defined(CONFIG_BF51x)
bfin_read32((unsigned long *)SIC_IAR0 +
((irqn % 32) >> 3) + ((irqn / 32) *
((SIC_IAR4 - SIC_IAR0) / 4))) >> iar_shift)) {
for (irqN = 0; irqN < NR_PERI_INTS; irqN += 4) {
int irqn;
u32 iar = bfin_read32((unsigned long *)SIC_IAR0 +
#if defined(CONFIG_BF51x) || defined(CONFIG_BF52x) || \
defined(CONFIG_BF538) || defined(CONFIG_BF539)
((irqN % 32) >> 3) + ((irqN / 32) * ((SIC_IAR4 - SIC_IAR0) / 4))
#else
bfin_read32((unsigned long *)SIC_IAR0 +
(irqn >> 3)) >> iar_shift)) {
(irqN >> 3)
#endif
ivg_table[irq_pos].irqno = IVG7 + irqn;
ivg_table[irq_pos].isrflag = 1 << (irqn % 32);
ivg7_13[ivg].istop++;
irq_pos++;
);
for (irqn = irqN; irqn < irqN + 4; ++irqn) {
int iar_shift = (irqn & 7) * 4;
if (ivg == (0xf & (iar >> iar_shift))) {
ivg_table[irq_pos].irqno = IVG7 + irqn;
ivg_table[irq_pos].isrflag = 1 << (irqn % 32);
ivg7_13[ivg].istop++;
irq_pos++;
}
}
}
}
......@@ -662,14 +665,7 @@ static int bfin_gpio_irq_type(unsigned int irq, unsigned int type)
#ifdef CONFIG_PM
int bfin_gpio_set_wake(unsigned int irq, unsigned int state)
{
unsigned gpio = irq_to_gpio(irq);
if (state)
gpio_pm_wakeup_request(gpio, PM_WAKE_IGNORE);
else
gpio_pm_wakeup_free(gpio);
return 0;
return gpio_pm_wakeup_ctrl(irq_to_gpio(irq), state);
}
#endif
......
arch/blackfin/mach-common/pm.c
View file @ 064e297c
......@@ -20,35 +20,11 @@
#include <asm/dma.h>
#include <asm/dpmc.h>
#ifdef CONFIG_PM_WAKEUP_GPIO_POLAR_H
#define WAKEUP_TYPE PM_WAKE_HIGH
#endif
#ifdef CONFIG_PM_WAKEUP_GPIO_POLAR_L
#define WAKEUP_TYPE PM_WAKE_LOW
#endif
#ifdef CONFIG_PM_WAKEUP_GPIO_POLAR_EDGE_F
#define WAKEUP_TYPE PM_WAKE_FALLING
#endif
#ifdef CONFIG_PM_WAKEUP_GPIO_POLAR_EDGE_R
#define WAKEUP_TYPE PM_WAKE_RISING
#endif
#ifdef CONFIG_PM_WAKEUP_GPIO_POLAR_EDGE_B
#define WAKEUP_TYPE PM_WAKE_BOTH_EDGES
#endif
void bfin_pm_suspend_standby_enter(void)
{
unsigned long flags;
#ifdef CONFIG_PM_WAKEUP_BY_GPIO
gpio_pm_wakeup_request(CONFIG_PM_WAKEUP_GPIO_NUMBER, WAKEUP_TYPE);
#endif
local_irq_save_hw(flags);
bfin_pm_standby_setup();
......
arch/blackfin/mach-common/smp.c
View file @ 064e297c
......@@ -170,8 +170,8 @@ static irqreturn_t ipi_handler(int irq, void *dev_instance)
kfree(msg);
break;
default:
printk(KERN_CRIT "CPU%u: Unknown IPI message \
0x%lx\n", cpu, msg->type);
printk(KERN_CRIT "CPU%u: Unknown IPI message 0x%lx\n",
cpu, msg->type);
kfree(msg);
break;
}
......
arch/blackfin/mm/init.c
View file @ 064e297c
......@@ -15,23 +15,11 @@
#include "blackfin_sram.h"
/*
* BAD_PAGE is the page that is used for page faults when linux
* is out-of-memory. Older versions of linux just did a
* do_exit(), but using this instead means there is less risk
* for a process dying in kernel mode, possibly leaving a inode
* unused etc..
*
* BAD_PAGETABLE is the accompanying page-table: it is initialized
* to point to BAD_PAGE entries.
*
* ZERO_PAGE is a special page that is used for zero-initialized
* data and COW.
* ZERO_PAGE is a special page that is used for zero-initialized data and COW.
* Let the bss do its zero-init magic so we don't have to do it ourselves.
*/
static unsigned long empty_bad_page_table;
static unsigned long empty_bad_page;
static unsigned long empty_zero_page;
char empty_zero_page[PAGE_SIZE] __attribute__((aligned(PAGE_SIZE)));
EXPORT_SYMBOL(empty_zero_page);
#ifndef CONFIG_EXCEPTION_L1_SCRATCH
#if defined CONFIG_SYSCALL_TAB_L1
......@@ -52,40 +40,26 @@ EXPORT_SYMBOL(cpu_pda);
void __init paging_init(void)
{
/*
* make sure start_mem is page aligned, otherwise bootmem and
* page_alloc get different views og the world
* make sure start_mem is page aligned, otherwise bootmem and
* page_alloc get different views of the world
*/
unsigned long end_mem = memory_end & PAGE_MASK;
pr_debug("start_mem is %#lx virtual_end is %#lx\n", PAGE_ALIGN(memory_start), end_mem);
/*
* initialize the bad page table and bad page to point
* to a couple of allocated pages
*/
empty_bad_page_table = (unsigned long)alloc_bootmem_pages(PAGE_SIZE);
empty_bad_page = (unsigned long)alloc_bootmem_pages(PAGE_SIZE);
empty_zero_page = (unsigned long)alloc_bootmem_pages(PAGE_SIZE);
memset((void *)empty_zero_page, 0, PAGE_SIZE);
unsigned long zones_size[MAX_NR_ZONES] = {
[0] = 0,
[ZONE_DMA] = (end_mem - PAGE_OFFSET) >> PAGE_SHIFT,
[ZONE_NORMAL] = 0,
#ifdef CONFIG_HIGHMEM
[ZONE_HIGHMEM] = 0,
#endif
};
/*
* Set up SFC/DFC registers (user data space)
*/
/* Set up SFC/DFC registers (user data space) */
set_fs(KERNEL_DS);
pr_debug("free_area_init -> start_mem is %#lx virtual_end is %#lx\n",
pr_debug("free_area_init -> start_mem is %#lx virtual_end is %#lx\n",
PAGE_ALIGN(memory_start), end_mem);
{
unsigned long zones_size[MAX_NR_ZONES] = { 0, };
zones_size[ZONE_DMA] = (end_mem - PAGE_OFFSET) >> PAGE_SHIFT;
zones_size[ZONE_NORMAL] = 0;
#ifdef CONFIG_HIGHMEM
zones_size[ZONE_HIGHMEM] = 0;
#endif
free_area_init(zones_size);
}
free_area_init(zones_size);
}
asmlinkage void __init init_pda(void)
......
arch/blackfin/mm/isram-driver.c
View file @ 064e297c
......@@ -43,13 +43,12 @@ static DEFINE_SPINLOCK(dtest_lock);
/* Takes a void pointer */
#define IADDR2DTEST(x) \
({ unsigned long __addr = (unsigned long)(x); \
(__addr & 0x47F8) | /* address bits 14 & 10:3 */ \
(__addr & 0x8000) << 23 | /* Bank A/B */ \
(__addr & 0x0800) << 15 | /* address bit 11 */ \
(__addr & 0x3000) << 4 | /* address bits 13:12 */ \
(__addr & 0x8000) << 8 | /* address bit 15 */ \
(0x1000000) | /* instruction access = 1 */ \
(0x4); /* data array = 1 */ \
((__addr & (1 << 11)) << (26 - 11)) | /* addr bit 11 (Way0/Way1) */ \
(1 << 24) | /* instruction access = 1 */ \
((__addr & (1 << 15)) << (23 - 15)) | /* addr bit 15 (Data Bank) */ \
((__addr & (3 << 12)) << (16 - 12)) | /* addr bits 13:12 (Subbank) */ \
(__addr & 0x47F8) | /* addr bits 14 & 10:3 */ \
(1 << 2); /* data array = 1 */ \
})
/* Takes a pointer, and returns the offset (in bits) which things should be shifted */
......@@ -196,7 +195,7 @@ EXPORT_SYMBOL(isram_memcpy);
#ifdef CONFIG_BFIN_ISRAM_SELF_TEST
#define TEST_LEN 0x100
static int test_len = 0x20000;
static __init void hex_dump(unsigned char *buf, int len)
{
......@@ -212,15 +211,15 @@ static __init int isram_read_test(char *sdram, void *l1inst)
pr_info("INFO: running isram_read tests\n");
/* setup some different data to play with */
for (i = 0; i < TEST_LEN; ++i)
sdram[i] = i;
dma_memcpy(l1inst, sdram, TEST_LEN);
for (i = 0; i < test_len; ++i)
sdram[i] = i % 255;
dma_memcpy(l1inst, sdram, test_len);
/* make sure we can read the L1 inst */
for (i = 0; i < TEST_LEN; i += sizeof(uint64_t)) {
for (i = 0; i < test_len; i += sizeof(uint64_t)) {
data1 = isram_read(l1inst + i);
memcpy(&data2, sdram + i, sizeof(data2));
if (memcmp(&data1, &data2, sizeof(uint64_t))) {
if (data1 != data2) {
pr_err("FAIL: isram_read(%p) returned %#llx but wanted %#llx\n",
l1inst + i, data1, data2);
++ret;
......@@ -238,25 +237,25 @@ static __init int isram_write_test(char *sdram, void *l1inst)
pr_info("INFO: running isram_write tests\n");
/* setup some different data to play with */
memset(sdram, 0, TEST_LEN * 2);
dma_memcpy(l1inst, sdram, TEST_LEN);
for (i = 0; i < TEST_LEN; ++i)
sdram[i] = i;
memset(sdram, 0, test_len * 2);
dma_memcpy(l1inst, sdram, test_len);
for (i = 0; i < test_len; ++i)
sdram[i] = i % 255;
/* make sure we can write the L1 inst */
for (i = 0; i < TEST_LEN; i += sizeof(uint64_t)) {
for (i = 0; i < test_len; i += sizeof(uint64_t)) {
memcpy(&data1, sdram + i, sizeof(data1));
isram_write(l1inst + i, data1);
data2 = isram_read(l1inst + i);
if (memcmp(&data1, &data2, sizeof(uint64_t))) {
if (data1 != data2) {
pr_err("FAIL: isram_write(%p, %#llx) != %#llx\n",
l1inst + i, data1, data2);
++ret;
}
}
dma_memcpy(sdram + TEST_LEN, l1inst, TEST_LEN);
if (memcmp(sdram, sdram + TEST_LEN, TEST_LEN)) {
dma_memcpy(sdram + test_len, l1inst, test_len);
if (memcmp(sdram, sdram + test_len, test_len)) {
pr_err("FAIL: isram_write() did not work properly\n");
++ret;
}
......@@ -268,12 +267,12 @@ static __init int
_isram_memcpy_test(char pattern, void *sdram, void *l1inst, const char *smemcpy,
void *(*fmemcpy)(void *, const void *, size_t))
{
memset(sdram, pattern, TEST_LEN);
fmemcpy(l1inst, sdram, TEST_LEN);
fmemcpy(sdram + TEST_LEN, l1inst, TEST_LEN);
if (memcmp(sdram, sdram + TEST_LEN, TEST_LEN)) {
memset(sdram, pattern, test_len);
fmemcpy(l1inst, sdram, test_len);
fmemcpy(sdram + test_len, l1inst, test_len);
if (memcmp(sdram, sdram + test_len, test_len)) {
pr_err("FAIL: %s(%p <=> %p, %#x) failed (data is %#x)\n",
smemcpy, l1inst, sdram, TEST_LEN, pattern);
smemcpy, l1inst, sdram, test_len, pattern);
return 1;
}
return 0;
......@@ -292,12 +291,13 @@ static __init int isram_memcpy_test(char *sdram, void *l1inst)
/* check read of small, unaligned, and hardware 64bit limits */
pr_info("INFO: running isram_memcpy (read) tests\n");
for (i = 0; i < TEST_LEN; ++i)
sdram[i] = i;
dma_memcpy(l1inst, sdram, TEST_LEN);
/* setup some different data to play with */
for (i = 0; i < test_len; ++i)
sdram[i] = i % 255;
dma_memcpy(l1inst, sdram, test_len);
thisret = 0;
for (i = 0; i < TEST_LEN - 32; ++i) {
for (i = 0; i < test_len - 32; ++i) {
unsigned char cmp[32];
for (j = 1; j <= 32; ++j) {
memset(cmp, 0, sizeof(cmp));
......@@ -310,7 +310,7 @@ static __init int isram_memcpy_test(char *sdram, void *l1inst)
pr_cont("\n");
if (++thisret > 20) {
pr_err("FAIL: skipping remaining series\n");
i = TEST_LEN;
i = test_len;
break;
}
}
......@@ -321,11 +321,11 @@ static __init int isram_memcpy_test(char *sdram, void *l1inst)
/* check write of small, unaligned, and hardware 64bit limits */
pr_info("INFO: running isram_memcpy (write) tests\n");
memset(sdram + TEST_LEN, 0, TEST_LEN);
dma_memcpy(l1inst, sdram + TEST_LEN, TEST_LEN);
memset(sdram + test_len, 0, test_len);
dma_memcpy(l1inst, sdram + test_len, test_len);
thisret = 0;
for (i = 0; i < TEST_LEN - 32; ++i) {
for (i = 0; i < test_len - 32; ++i) {
unsigned char cmp[32];
for (j = 1; j <= 32; ++j) {
isram_memcpy(l1inst + i, sdram + i, j);
......@@ -338,7 +338,7 @@ static __init int isram_memcpy_test(char *sdram, void *l1inst)
pr_cont("\n");
if (++thisret > 20) {
pr_err("FAIL: skipping remaining series\n");
i = TEST_LEN;
i = test_len;
break;
}
}
......@@ -355,22 +355,30 @@ static __init int isram_test_init(void)
char *sdram;
void *l1inst;
sdram = kmalloc(TEST_LEN * 2, GFP_KERNEL);
if (!sdram) {
pr_warning("SKIP: could not allocate sdram\n");
return 0;
/* Try to test as much of L1SRAM as possible */
while (test_len) {
test_len >>= 1;
l1inst = l1_inst_sram_alloc(test_len);
if (l1inst)
break;
}
l1inst = l1_inst_sram_alloc(TEST_LEN);
if (!l1inst) {
kfree(sdram);
pr_warning("SKIP: could not allocate L1 inst\n");
return 0;
}
pr_info("INFO: testing %#x bytes (%p - %p)\n",
test_len, l1inst, l1inst + test_len);
sdram = kmalloc(test_len * 2, GFP_KERNEL);
if (!sdram) {
sram_free(l1inst);
pr_warning("SKIP: could not allocate sdram\n");
return 0;
}
/* sanity check initial L1 inst state */
ret = 1;
pr_info("INFO: running initial dma_memcpy checks\n");
pr_info("INFO: running initial dma_memcpy checks %p\n", sdram);
if (_isram_memcpy_test(0xa, sdram, l1inst, dma_memcpy))
goto abort;
if (_isram_memcpy_test(0x5, sdram, l1inst, dma_memcpy))
......
arch/blackfin/mm/sram-alloc.c
View file @ 064e297c
......@@ -256,7 +256,8 @@ static void *_sram_alloc(size_t size, struct sram_piece *pfree_head,
plast->next = pslot->next;
pavail = pslot;
} else {
pavail = kmem_cache_alloc(sram_piece_cache, GFP_KERNEL);
/* use atomic so our L1 allocator can be used atomically */
pavail = kmem_cache_alloc(sram_piece_cache, GFP_ATOMIC);
if (!pavail)
return NULL;
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7