Merge bk://ldm.bkbits.net/linux-2.5-core

into kroah.com:/home/greg/linux/BK/gregkh-2.5

drivers/usb/core/devio.c

@@ -1077,7 +1077,7 @@ static int proc_ioctl (struct dev_state *ps, void *arg)
 			     driver->name, ps->dev->devnum, ctrl.ifno);
 			usb_device_remove(&ifp->dev);
 		} else
-			retval = -EINVAL;
+			retval = -ENODATA;
 		break;
 
 	/* let kernel drivers try to (re)bind to the interface */

drivers/usb/core/message.c

@@ -847,7 +847,7 @@ int usb_set_interface(struct usb_device *dev, int interface, int alternate)
 		ep &= USB_ENDPOINT_NUMBER_MASK;
 		usb_settoggle (dev, ep, out, 0);
 		(out ? dev->epmaxpacketout : dev->epmaxpacketin) [ep]
-			= iface_as->endpoint [ep].wMaxPacketSize;
+			= iface_as->endpoint [i].wMaxPacketSize;
 	}
 
 	return 0;

drivers/usb/core/usb.c

@@ -790,6 +790,7 @@ void usb_disconnect(struct usb_device **pdev)
 			usb_disconnect(child);
 	}
 
+	dbg ("unregistering interfaces on device %d", dev->devnum);
 	if (dev->actconfig) {
 		for (i = 0; i < dev->actconfig->bNumInterfaces; i++) {
 			struct usb_interface *interface = &dev->actconfig->interface[i];
@@ -799,12 +800,13 @@ void usb_disconnect(struct usb_device **pdev)
 		}
 	}
 
+	dbg ("unregistering the device %d", dev->devnum);
 	/* Free the device number and remove the /proc/bus/usb entry */
 	if (dev->devnum > 0) {
 		clear_bit(dev->devnum, dev->bus->devmap.devicemap);
 		usbfs_remove_device(dev);
-		device_unregister(&dev->dev);
 	}
+	device_unregister(&dev->dev);
 
 	/* Decrement the reference count, it'll auto free everything when */
 	/* it hits 0 which could very well be now */

drivers/usb/host/uhci-debug.c

@@ -34,17 +34,6 @@ static void inline lprintk(char *buf)
 	}
 }
 
-static int inline uhci_is_skeleton_td(struct uhci_hcd *uhci, struct uhci_td *td)
-{
-	int i;
-
-	for (i = 0; i < UHCI_NUM_SKELTD; i++)
-		if (td == uhci->skeltd[i])
-			return 1;
-
-	return 0;
-}
-
 static int inline uhci_is_skeleton_qh(struct uhci_hcd *uhci, struct uhci_qh *qh)
 {
 	int i;
@@ -285,13 +274,14 @@ static int uhci_show_qh(struct uhci_qh *qh, char *buf, int len, int space)
 	return out - buf;
 }
 
-static const char *td_names[] = {"skel_int1_td", "skel_int2_td",
-				 "skel_int4_td", "skel_int8_td",
-				 "skel_int16_td", "skel_int32_td",
-				 "skel_int64_td", "skel_int128_td",
-				 "skel_int256_td", "skel_term_td" };
-static const char *qh_names[] = { "skel_ls_control_qh", "skel_hs_control_qh",
-				  "skel_bulk_qh", "skel_term_qh" };
+static const char *qh_names[] = {
+  "skel_int128_qh", "skel_int64_qh",
+  "skel_int32_qh", "skel_int16_qh",
+  "skel_int8_qh", "skel_int4_qh",
+  "skel_int2_qh", "skel_int1_qh",
+  "skel_ls_control_qh", "skel_hs_control_qh",
+  "skel_bulk_qh", "skel_term_qh"
+};
 
 #define show_frame_num()	\
 	if (!shown) {		\
@@ -299,26 +289,141 @@ static const char *qh_names[] = { "skel_ls_control_qh", "skel_hs_control_qh",
 	  out += sprintf(out, "- Frame %d\n", i); \
 	}
 
-#define show_td_name()		\
-	if (!shown) {		\
-	  shown = 1;		\
-	  out += sprintf(out, "- %s\n", td_names[i]); \
-	}
-
 #define show_qh_name()		\
 	if (!shown) {		\
 	  shown = 1;		\
 	  out += sprintf(out, "- %s\n", qh_names[i]); \
 	}
 
+static int uhci_show_urbp(struct uhci_hcd *uhci, struct urb_priv *urbp, char *buf, int len)
+{
+	struct list_head *tmp;
+	char *out = buf;
+	int count = 0;
+
+	if (len < 200)
+		return 0;
+
+	out += sprintf(out, "urb_priv [%p] ", urbp);
+	out += sprintf(out, "urb [%p] ", urbp->urb);
+	out += sprintf(out, "qh [%p] ", urbp->qh);
+	out += sprintf(out, "Dev=%d ", usb_pipedevice(urbp->urb->pipe));
+	out += sprintf(out, "EP=%x(%s) ", usb_pipeendpoint(urbp->urb->pipe), (usb_pipein(urbp->urb->pipe) ? "IN" : "OUT"));
+
+	switch (usb_pipetype(urbp->urb->pipe)) {
+	case PIPE_ISOCHRONOUS: out += sprintf(out, "ISO "); break;
+	case PIPE_INTERRUPT: out += sprintf(out, "INT "); break;
+	case PIPE_BULK: out += sprintf(out, "BLK "); break;
+	case PIPE_CONTROL: out += sprintf(out, "CTL "); break;
+	}
+
+	out += sprintf(out, "%s", (urbp->fsbr ? "FSBR " : ""));
+	out += sprintf(out, "%s", (urbp->fsbr_timeout ? "FSBR_TO " : ""));
+
+	if (urbp->status != -EINPROGRESS)
+		out += sprintf(out, "Status=%d ", urbp->status);
+	//out += sprintf(out, "Inserttime=%lx ",urbp->inserttime);
+	//out += sprintf(out, "FSBRtime=%lx ",urbp->fsbrtime);
+
+	spin_lock(&urbp->urb->lock);
+	count = 0;
+	list_for_each(tmp, &urbp->td_list)
+		count++;
+	spin_unlock(&urbp->urb->lock);
+	out += sprintf(out, "TDs=%d ",count);
+
+	if (urbp->queued)
+		out += sprintf(out, "queued\n");
+	else {
+		spin_lock(&uhci->frame_list_lock);
+		count = 0;
+		list_for_each(tmp, &urbp->queue_list)
+			count++;
+		spin_unlock(&uhci->frame_list_lock);
+		out += sprintf(out, "queued URBs=%d\n", count);
+	}
+
+	return out - buf;
+}
+
+static int uhci_show_lists(struct uhci_hcd *uhci, char *buf, int len)
+{
+	char *out = buf;
+	unsigned long flags;
+	struct list_head *head, *tmp;
+	int count;
+
+	out += sprintf(out, "Main list URBs:");
+	spin_lock_irqsave(&uhci->urb_list_lock, flags);
+	if (list_empty(&uhci->urb_list))
+		out += sprintf(out, " Empty\n");
+	else {
+		out += sprintf(out, "\n");
+		count = 0;
+		head = &uhci->urb_list;
+		tmp = head->next;
+		while (tmp != head) {
+			struct urb_priv *urbp = list_entry(tmp, struct urb_priv, urb_list);
+
+			out += sprintf(out, "  %d: ", ++count);
+			out += uhci_show_urbp(uhci, urbp, out, len - (out - buf));
+			tmp = tmp->next;
+		}
+	}
+	spin_unlock_irqrestore(&uhci->urb_list_lock, flags);
+
+	out += sprintf(out, "Remove list URBs:");
+	spin_lock_irqsave(&uhci->urb_remove_list_lock, flags);
+	if (list_empty(&uhci->urb_remove_list))
+		out += sprintf(out, " Empty\n");
+	else {
+		out += sprintf(out, "\n");
+		count = 0;
+		head = &uhci->urb_remove_list;
+		tmp = head->next;
+		while (tmp != head) {
+			struct urb_priv *urbp = list_entry(tmp, struct urb_priv, urb_list);
+
+			out += sprintf(out, "  %d: ", ++count);
+			out += uhci_show_urbp(uhci, urbp, out, len - (out - buf));
+			tmp = tmp->next;
+		}
+	}
+	spin_unlock_irqrestore(&uhci->urb_remove_list_lock, flags);
+
+	out += sprintf(out, "Complete list URBs:");
+	spin_lock_irqsave(&uhci->complete_list_lock, flags);
+	if (list_empty(&uhci->complete_list))
+		out += sprintf(out, " Empty\n");
+	else {
+		out += sprintf(out, "\n");
+		count = 0;
+		head = &uhci->complete_list;
+		tmp = head->next;
+		while (tmp != head) {
+			struct urb_priv *urbp = list_entry(tmp, struct urb_priv, complete_list);
+
+			out += sprintf(out, "  %d: ", ++count);
+			out += uhci_show_urbp(uhci, urbp, out, len - (out - buf));
+			tmp = tmp->next;
+		}
+	}
+	spin_unlock_irqrestore(&uhci->complete_list_lock, flags);
+
+	return out - buf;
+}
+
 static int uhci_sprint_schedule(struct uhci_hcd *uhci, char *buf, int len)
 {
+	unsigned long flags;
 	char *out = buf;
 	int i;
 	struct uhci_qh *qh;
 	struct uhci_td *td;
 	struct list_head *tmp, *head;
 
+	spin_lock_irqsave(&uhci->frame_list_lock, flags);
+
 	out += sprintf(out, "HC status\n");
 	out += uhci_show_status(uhci, out, len - (out - buf));
 
@@ -333,8 +438,6 @@ static int uhci_sprint_schedule(struct uhci_hcd *uhci, char *buf, int len)
 			show_frame_num();
 			out += sprintf(out, "    frame list does not match td->dma_handle!\n");
 		}
-		if (uhci_is_skeleton_td(uhci, td))
-			continue;
 		show_frame_num();
 
 		head = &td->fl_list;
@@ -346,67 +449,6 @@ static int uhci_sprint_schedule(struct uhci_hcd *uhci, char *buf, int len)
 		} while (tmp != head);
 	}
 
-	out += sprintf(out, "Skeleton TD's\n");
-	for (i = UHCI_NUM_SKELTD - 1; i >= 0; i--) {
-		int shown = 0;
-
-		td = uhci->skeltd[i];
-
-		if (debug > 1) {
-			show_td_name();
-			out += uhci_show_td(td, out, len - (out - buf), 4);
-		}
-
-		if (list_empty(&td->fl_list)) {
-			/* TD 0 is the int1 TD and links to control_ls_qh */
-			if (!i) {
-				if (td->link !=
-				    (cpu_to_le32(uhci->skel_ls_control_qh->dma_handle) | UHCI_PTR_QH)) {
-					show_td_name();
-					out += sprintf(out, "    skeleton TD not linked to ls_control QH!\n");
-				}
-			} else if (i < 9) {
-				if (td->link != cpu_to_le32(uhci->skeltd[i - 1]->dma_handle)) {
-					show_td_name();
-					out += sprintf(out, "    skeleton TD not linked to next skeleton TD!\n");
-				}
-			} else {
-				show_td_name();
-
-				if (td->link != cpu_to_le32(td->dma_handle))
-					out += sprintf(out, "    skel_term_td does not link to self\n");
-
-				/* Don't show it twice */
-				if (debug <= 1)
-					out += uhci_show_td(td, out, len - (out - buf), 4);
-			}
-
-			continue;
-		}
-
-		show_td_name();
-
-		head = &td->fl_list;
-		tmp = head->next;
-
-		while (tmp != head) {
-			td = list_entry(tmp, struct uhci_td, fl_list);
-
-			tmp = tmp->next;
-
-			out += uhci_show_td(td, out, len - (out - buf), 4);
-		}
-
-		if (!i) {
-			if (td->link !=
-			    (cpu_to_le32(uhci->skel_ls_control_qh->dma_handle) | UHCI_PTR_QH))
-				out += sprintf(out, "    last TD not linked to ls_control QH!\n");
-		} else if (i < 9) {
-			if (td->link != cpu_to_le32(uhci->skeltd[i - 1]->dma_handle))
-				out += sprintf(out, "    last TD not linked to next skeleton!\n");
-		}
-	}
-
 	out += sprintf(out, "Skeleton QH's\n");
 
 	for (i = 0; i < UHCI_NUM_SKELQH; ++i) {
@@ -419,21 +461,19 @@ static int uhci_sprint_schedule(struct uhci_hcd *uhci, char *buf, int len)
 			out += uhci_show_qh(qh, out, len - (out - buf), 4);
 		}
 
-		/* QH 3 is the Terminating QH, it's different */
-		if (i == 3) {
-			if (qh->link != UHCI_PTR_TERM) {
-				show_qh_name();
+		/* Last QH is the Terminating QH, it's different */
+		if (i == UHCI_NUM_SKELQH - 1) {
+			if (qh->link != UHCI_PTR_TERM)
 				out += sprintf(out, "    bandwidth reclamation on!\n");
-			}
 
-			if (qh->element != cpu_to_le32(uhci->skel_term_td->dma_handle)) {
-				show_qh_name();
-				out += sprintf(out, "    skel_term_qh element is not set to skel_term_td\n");
-			}
+			if (qh->element != cpu_to_le32(uhci->term_td->dma_handle))
+				out += sprintf(out, "    skel_term_qh element is not set to term_td!\n");
+
+			continue;
 		}
 
 		if (list_empty(&qh->list)) {
-			if (i < 3) {
+			if (i < UHCI_NUM_SKELQH - 1) {
 				if (qh->link !=
 				    (cpu_to_le32(uhci->skelqh[i + 1]->dma_handle) | UHCI_PTR_QH)) {
 					show_qh_name();
@@ -457,18 +497,23 @@ static int uhci_sprint_schedule(struct uhci_hcd *uhci, char *buf, int len)
 			out += uhci_show_qh(qh, out, len - (out - buf), 4);
 		}
 
-		if (i < 3) {
+		if (i < UHCI_NUM_SKELQH - 1) {
 			if (qh->link !=
 			    (cpu_to_le32(uhci->skelqh[i + 1]->dma_handle) | UHCI_PTR_QH))
 				out += sprintf(out, "    last QH not linked to next skeleton!\n");
 		}
 	}
 
+	spin_unlock_irqrestore(&uhci->frame_list_lock, flags);
+
+	if (debug > 2)
+		out += uhci_show_lists(uhci, out, len - (out - buf));
+
 	return out - buf;
 }
 
 #ifdef CONFIG_PROC_FS
-#define MAX_OUTPUT	(PAGE_SIZE * 8)
+#define MAX_OUTPUT	(PAGE_SIZE * 16)
 
 static struct proc_dir_entry *uhci_proc_root = NULL;
 
@@ -483,7 +528,6 @@ static int uhci_proc_open(struct inode *inode, struct file *file)
 	const struct proc_dir_entry *dp = PDE(inode);
 	struct uhci_hcd *uhci = dp->data;
 	struct uhci_proc *up;
-	unsigned long flags;
 	int ret = -ENOMEM;
 
 	lock_kernel();
@@ -497,9 +541,7 @@ static int uhci_proc_open(struct inode *inode, struct file *file)
 		goto out;
 	}
 
-	spin_lock_irqsave(&uhci->frame_list_lock, flags);
 	up->size = uhci_sprint_schedule(uhci, up->data, MAX_OUTPUT);
-	spin_unlock_irqrestore(&uhci->frame_list_lock, flags);
 
 	file->private_data = up;
 

drivers/usb/host/uhci-hcd.c

@@ -69,7 +69,7 @@
  * debug = 0, no debugging messages
  * debug = 1, dump failed URB's except for stalls
  * debug = 2, dump all failed URB's (including stalls)
- *            show all queues in /proc/uhci/hc*
+ *            show all queues in /proc/driver/uhci/[pci_addr]
  * debug = 3, show all TD's in URB's when dumping
  */
 #ifdef DEBUG
@@ -118,7 +118,7 @@ static inline void uhci_set_next_interrupt(struct uhci_hcd *uhci)
 	unsigned long flags;
 
 	spin_lock_irqsave(&uhci->frame_list_lock, flags);
-	uhci->skel_term_td->status |= cpu_to_le32(TD_CTRL_IOC); 
+	uhci->term_td->status |= cpu_to_le32(TD_CTRL_IOC); 
 	spin_unlock_irqrestore(&uhci->frame_list_lock, flags);
 }
 
@@ -127,7 +127,7 @@ static inline void uhci_clear_next_interrupt(struct uhci_hcd *uhci)
 	unsigned long flags;
 
 	spin_lock_irqsave(&uhci->frame_list_lock, flags);
-	uhci->skel_term_td->status &= ~cpu_to_le32(TD_CTRL_IOC);
+	uhci->term_td->status &= ~cpu_to_le32(TD_CTRL_IOC);
 	spin_unlock_irqrestore(&uhci->frame_list_lock, flags);
 }
 
@@ -174,30 +174,8 @@ static void inline uhci_fill_td(struct uhci_td *td, __u32 status,
 	td->buffer = cpu_to_le32(buffer);
 }
 
-static void uhci_insert_td(struct uhci_hcd *uhci, struct uhci_td *skeltd, struct uhci_td *td)
-{
-	unsigned long flags;
-	struct uhci_td *ltd;
-
-	spin_lock_irqsave(&uhci->frame_list_lock, flags);
-
-	ltd = list_entry(skeltd->fl_list.prev, struct uhci_td, fl_list);
-
-	td->link = ltd->link;
-	mb();
-	ltd->link = cpu_to_le32(td->dma_handle);
-
-	list_add_tail(&td->fl_list, &skeltd->fl_list);
-
-	spin_unlock_irqrestore(&uhci->frame_list_lock, flags);
-}
-
 /*
- * We insert Isochronous transfers directly into the frame list at the
- * beginning
- * The layout looks as follows:
- * frame list pointer -> iso td's (if any) ->
- * periodic interrupt td (if frame 0) -> irq td's -> control qh -> bulk qh
+ * We insert Isochronous URB's directly into the frame list at the beginning
  */
 static void uhci_insert_td_frame_list(struct uhci_hcd *uhci, struct uhci_td *td, unsigned framenum)
 {
@@ -374,8 +352,9 @@ static void _uhci_insert_qh(struct uhci_hcd *uhci, struct uhci_qh *skelqh, struc
 	/* Grab the last QH */
 	lqh = list_entry(skelqh->list.prev, struct uhci_qh, list);
 
-	/* Patch this endpoint's URBs' QHs to point to the next skelQH:
-	 *    SkelQH --> ... lqh --> NewQH --> NextSkelQH
+	/*
+	 * Patch this endpoint's URB's QHs to point to the next skelqh:
+	 *    skelqh --> ... lqh --> newqh --> next skelqh
 	 * Do this first, so the HC always sees the right QH after this one.
 	 */
 	list_for_each (tmp, &urbp->queue_list) {
@@ -387,15 +366,16 @@ static void _uhci_insert_qh(struct uhci_hcd *uhci, struct uhci_qh *skelqh, struc
 	urbp->qh->link = lqh->link;
 	wmb();				/* Ordering is important */
 
-	/* Patch QHs for previous endpoint's queued URBs?  HC goes
-	 * here next, not to the NextSkelQH it now points to.
+	/*
+	 * Patch QHs for previous endpoint's queued URBs?  HC goes
+	 * here next, not to the next skelqh it now points to.
 	 *
 	 *    lqh --> td ... --> qh ... --> td --> qh ... --> td
 	 *     |                 |                 |
 	 *     v                 v                 v
 	 *     +<----------------+-----------------+
 	 *     v
-	 *    NewQH --> td ... --> td
+	 *    newqh --> td ... --> td
 	 *     |
 	 *     v
 	 *    ...
@@ -424,7 +404,8 @@ static void uhci_insert_qh(struct uhci_hcd *uhci, struct uhci_qh *skelqh, struct
 	spin_unlock_irqrestore(&uhci->frame_list_lock, flags);
 }
 
-/* start removal of qh from schedule; it finishes next frame.
+/*
+ * Start removal of QH from schedule; it finishes next frame.
  * TDs should be unlinked before this is called.
  */
 static void uhci_remove_qh(struct uhci_hcd *uhci, struct uhci_qh *qh)
@@ -437,7 +418,12 @@ static void uhci_remove_qh(struct uhci_hcd *uhci, struct uhci_qh *qh)
 
 	qh->urbp = NULL;
 
-	/* Only go through the hoops if it's actually linked in */
+	/*
+	 * Only go through the hoops if it's actually linked in
+	 * Queued QHs are removed in uhci_delete_queued_urb,
+	 * since (for queued URBs) the pqh is pointed to the next
+	 * QH in the queue, not the next endpoint's QH.
+	 */
 	spin_lock_irqsave(&uhci->frame_list_lock, flags);
 	if (!list_empty(&qh->list)) {
 		pqh = list_entry(qh->list.prev, struct uhci_qh, list);
@@ -459,7 +445,9 @@ static void uhci_remove_qh(struct uhci_hcd *uhci, struct uhci_qh *qh)
 
 		pqh->link = qh->link;
 		mb();
-		qh->element = qh->link = UHCI_PTR_TERM;
+		/* Leave qh->link in case the HC is on the QH now, it will */
+		/* continue the rest of the schedule */
+		qh->element = UHCI_PTR_TERM;
 
 		list_del_init(&qh->list);
 	}
@@ -502,8 +490,7 @@ static int uhci_fixup_toggle(struct urb *urb, unsigned int toggle)
 }
 
 /* This function will append one URB's QH to another URB's QH. This is for */
-/* queuing bulk transfers and soon implicitily for */
-/*  control transfers */
+/* queuing interrupt, control or bulk transfers */
 static void uhci_append_queued_urb(struct uhci_hcd *uhci, struct urb *eurb, struct urb *urb)
 {
 	struct urb_priv *eurbp, *urbp, *furbp, *lurbp;
@@ -545,7 +532,7 @@ static void uhci_append_queued_urb(struct uhci_hcd *uhci, struct urb *eurb, stru
 	urbp->qh->link = eurbp->qh->link;
 
 	mb();			/* Make sure we flush everything */
-	/* Only support bulk right now, so no depth */
+
 	lltd->link = cpu_to_le32(urbp->qh->dma_handle) | UHCI_PTR_QH;
 
 	list_add_tail(&urbp->queue_list, &furbp->queue_list);
@@ -575,7 +562,7 @@ static void uhci_delete_queued_urb(struct uhci_hcd *uhci, struct urb *urb)
 
 	/* Fix up the toggle for the next URB's */
 	if (!urbp->queued)
-		/* We set the toggle when we unlink */
+		/* We just set the toggle in uhci_unlink_generic */
 		toggle = usb_gettoggle(urb->dev, usb_pipeendpoint(urb->pipe), usb_pipeout(urb->pipe));
 	else {
 		/* If we're in the middle of the queue, grab the toggle */
@@ -607,9 +594,35 @@ static void uhci_delete_queued_urb(struct uhci_hcd *uhci, struct urb *urb)
 		usb_pipeout(urb->pipe), toggle);
 
 	if (!urbp->queued) {
+		struct uhci_qh *pqh;
+
 		nurbp->queued = 0;
 
-		_uhci_insert_qh(uhci, uhci->skel_bulk_qh, nurbp->urb);
+		/*
+		 * Fixup the previous QH's queue to link to the new head
+		 * of this queue.
+		 */
+		pqh = list_entry(urbp->qh->list.prev, struct uhci_qh, list);
+
+		if (pqh->urbp) {
+			struct list_head *head, *tmp;
+
+			head = &pqh->urbp->queue_list;
+			tmp = head->next;
+			while (head != tmp) {
+				struct urb_priv *turbp =
+					list_entry(tmp, struct urb_priv, queue_list);
+
+				tmp = tmp->next;
+
+				turbp->qh->link = cpu_to_le32(nurbp->qh->dma_handle) | UHCI_PTR_QH;
+			}
+		}
+
+		pqh->link = cpu_to_le32(nurbp->qh->dma_handle) | UHCI_PTR_QH;
+
+		list_add_tail(&nurbp->qh->list, &urbp->qh->list);
+		list_del_init(&urbp->qh->list);
 	} else {
 		/* We're somewhere in the middle (or end). A bit trickier */
 		/*  than the head scenario */
@@ -786,11 +799,11 @@ static int uhci_map_status(int status, int dir_out)
 /*
  * Control transfers
  */
-static int uhci_submit_control(struct uhci_hcd *uhci, struct urb *urb)
+static int uhci_submit_control(struct uhci_hcd *uhci, struct urb *urb, struct urb *eurb)
 {
 	struct urb_priv *urbp = (struct urb_priv *)urb->hcpriv;
 	struct uhci_td *td;
-	struct uhci_qh *qh;
+	struct uhci_qh *qh, *skelqh;
 	unsigned long destination, status;
 	int maxsze = usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe));
 	int len = urb->transfer_buffer_length;
@@ -880,19 +893,32 @@ static int uhci_submit_control(struct uhci_hcd *uhci, struct urb *urb)
 	urbp->qh = qh;
 	qh->urbp = urbp;
 
-	/* Low speed transfers get a different queue, and won't hog the bus */
-	if (urb->dev->speed == USB_SPEED_LOW) {
-		uhci_insert_tds_in_qh(qh, urb, UHCI_PTR_DEPTH);
-		uhci_insert_qh(uhci, uhci->skel_ls_control_qh, urb);
-	} else {
 	uhci_insert_tds_in_qh(qh, urb, UHCI_PTR_BREADTH);
-		uhci_insert_qh(uhci, uhci->skel_hs_control_qh, urb);
+
+	/* Low speed transfers get a different queue, and won't hog the bus */
+	if (urb->dev->speed == USB_SPEED_LOW)
+		skelqh = uhci->skel_ls_control_qh;
+	else {
+		skelqh = uhci->skel_hs_control_qh;
 		uhci_inc_fsbr(uhci, urb);
 	}
 
+	if (eurb)
+		uhci_append_queued_urb(uhci, eurb, urb);
+	else
+		uhci_insert_qh(uhci, skelqh, urb);
+
 	return -EINPROGRESS;
 }
 
+/*
+ * If control was short, then end status packet wasn't sent, so this
+ * reorganize s so it's sent to finish the transfer.  The original QH is
+ * removed from the skel and discarded; all TDs except the last (status)
+ * are deleted; the last (status) TD is put on a new QH which is reinserted
+ * into the skel.  Since the last TD and urb_priv are reused, the TD->link
+ * and urb_priv maintain any queued QHs.
+ */
 static int usb_control_retrigger_status(struct uhci_hcd *uhci, struct urb *urb)
 {
 	struct list_head *tmp, *head;
@@ -1047,46 +1073,109 @@ static int uhci_result_control(struct uhci_hcd *uhci, struct urb *urb)
 }
 
 /*
- * Interrupt transfers
+ * Common submit for bulk and interrupt
  */
-static int uhci_submit_interrupt(struct uhci_hcd *uhci, struct urb *urb)
+static int uhci_submit_common(struct uhci_hcd *uhci, struct urb *urb, struct urb *eurb, struct uhci_qh *skelqh)
 {
 	struct uhci_td *td;
+	struct uhci_qh *qh;
 	unsigned long destination, status;
+	int maxsze = usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe));
+	int len = urb->transfer_buffer_length;
+	struct urb_priv *urbp = (struct urb_priv *)urb->hcpriv;
+	dma_addr_t data = urb->transfer_dma;
 
-	if (urb->transfer_buffer_length > usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)))
+	if (len < 0)
 		return -EINVAL;
 
 	/* The "pipe" thing contains the destination in bits 8--18 */
 	destination = (urb->pipe & PIPE_DEVEP_MASK) | usb_packetid(urb->pipe);
 
-	status = TD_CTRL_ACTIVE | TD_CTRL_IOC;
+	status = uhci_maxerr(3) | TD_CTRL_ACTIVE;
 	if (urb->dev->speed == USB_SPEED_LOW)
 		status |= TD_CTRL_LS;
+	if (!(urb->transfer_flags & URB_SHORT_NOT_OK))
+		status |= TD_CTRL_SPD;
+
+	/*
+	 * Build the DATA TD's
+	 */
+	do {	/* Allow zero length packets */
+		int pktsze = len;
+
+		if (pktsze > maxsze)
+			pktsze = maxsze;
 
 		td = uhci_alloc_td(uhci, urb->dev);
 		if (!td)
 			return -ENOMEM;
 
-	destination |= (usb_gettoggle(urb->dev, usb_pipeendpoint(urb->pipe), usb_pipeout(urb->pipe)) << TD_TOKEN_TOGGLE_SHIFT);
-	destination |= uhci_explen(urb->transfer_buffer_length - 1);
+		uhci_add_td_to_urb(urb, td);
+		uhci_fill_td(td, status, destination | uhci_explen(pktsze - 1) |
+			(usb_gettoggle(urb->dev, usb_pipeendpoint(urb->pipe),
+			 usb_pipeout(urb->pipe)) << TD_TOKEN_TOGGLE_SHIFT),
+			data);
+
+		data += pktsze;
+		len -= maxsze;
 
-	usb_dotoggle(urb->dev, usb_pipeendpoint(urb->pipe), usb_pipeout(urb->pipe));
+		usb_dotoggle(urb->dev, usb_pipeendpoint(urb->pipe),
+			usb_pipeout(urb->pipe));
+	} while (len > 0);
+
+	/*
+	 * USB_ZERO_PACKET means adding a 0-length packet, if direction
+	 * is OUT and the transfer_length was an exact multiple of maxsze,
+	 * hence (len = transfer_length - N * maxsze) == 0
+	 * however, if transfer_length == 0, the zero packet was already
+	 * prepared above.
+	 */
+	if (usb_pipeout(urb->pipe) && (urb->transfer_flags & USB_ZERO_PACKET) &&
+	    !len && urb->transfer_buffer_length) {
+		td = uhci_alloc_td(uhci, urb->dev);
+		if (!td)
+			return -ENOMEM;
 
 		uhci_add_td_to_urb(urb, td);
-	uhci_fill_td(td, status, destination, urb->transfer_dma);
+		uhci_fill_td(td, status, destination | uhci_explen(UHCI_NULL_DATA_SIZE) |
+			(usb_gettoggle(urb->dev, usb_pipeendpoint(urb->pipe),
+			 usb_pipeout(urb->pipe)) << TD_TOKEN_TOGGLE_SHIFT),
+			data);
 
-	uhci_insert_td(uhci, uhci->skeltd[__interval_to_skel(urb->interval)], td);
+		usb_dotoggle(urb->dev, usb_pipeendpoint(urb->pipe),
+			usb_pipeout(urb->pipe));
+	}
+
+	/* Set the flag on the last packet */
+	td->status |= cpu_to_le32(TD_CTRL_IOC);
+
+	qh = uhci_alloc_qh(uhci, urb->dev);
+	if (!qh)
+		return -ENOMEM;
+
+	urbp->qh = qh;
+	qh->urbp = urbp;
+
+	/* Always breadth first */
+	uhci_insert_tds_in_qh(qh, urb, UHCI_PTR_BREADTH);
+
+	if (eurb)
+		uhci_append_queued_urb(uhci, eurb, urb);
+	else
+		uhci_insert_qh(uhci, skelqh, urb);
 
 	return -EINPROGRESS;
 }
 
-static int uhci_result_interrupt(struct uhci_hcd *uhci, struct urb *urb)
+/*
+ * Common result for bulk and interrupt
+ */
+static int uhci_result_common(struct uhci_hcd *uhci, struct urb *urb)
 {
 	struct list_head *tmp, *head;
 	struct urb_priv *urbp = urb->hcpriv;
 	struct uhci_td *td;
-	unsigned int status;
+	unsigned int status = 0;
 	int ret = 0;
 
 	urb->actual_length = 0;
@@ -1128,15 +1217,11 @@ static int uhci_result_interrupt(struct uhci_hcd *uhci, struct urb *urb)
 err:
 	if ((debug == 1 && ret != -EPIPE) || debug > 1) {
 		/* Some debugging code */
-		dbg("uhci_result_interrupt/bulk() failed with status %x",
-			status);
+		dbg("uhci_result_common() failed with status %x", status);
 
 		if (errbuf) {
 			/* Print the chain for debugging purposes */
-			if (urbp->qh)
 			uhci_show_qh(urbp->qh, errbuf, ERRBUF_LEN, 0);
-			else
-				uhci_show_td(td, errbuf, ERRBUF_LEN, 0);
 
 			lprintk(errbuf);
 		}
@@ -1145,129 +1230,35 @@ static int uhci_result_interrupt(struct uhci_hcd *uhci, struct urb *urb)
 	return ret;
 }
 
-static void uhci_reset_interrupt(struct uhci_hcd *uhci, struct urb *urb)
+static inline int uhci_submit_bulk(struct uhci_hcd *uhci, struct urb *urb, struct urb *eurb)
 {
-	struct urb_priv *urbp = (struct urb_priv *)urb->hcpriv;
-	struct uhci_td *td;
-	unsigned long flags;
-
-	spin_lock_irqsave(&urb->lock, flags);
-
-	td = list_entry(urbp->td_list.next, struct uhci_td, list);
-
-	td->status = (td->status & cpu_to_le32(0x2F000000)) | cpu_to_le32(TD_CTRL_ACTIVE | TD_CTRL_IOC);
-	td->token &= ~cpu_to_le32(TD_TOKEN_TOGGLE);
-	td->token |= cpu_to_le32(usb_gettoggle(urb->dev, usb_pipeendpoint(urb->pipe), usb_pipeout(urb->pipe)) << TD_TOKEN_TOGGLE_SHIFT);
-	usb_dotoggle(urb->dev, usb_pipeendpoint(urb->pipe), usb_pipeout(urb->pipe));
-
-	urb->status = -EINPROGRESS;
-
-	spin_unlock_irqrestore(&urb->lock, flags);
-}
-
-/*
- * Bulk transfers
- */
-static int uhci_submit_bulk(struct uhci_hcd *uhci, struct urb *urb, struct urb *eurb)
-{
-	struct uhci_td *td;
-	struct uhci_qh *qh;
-	unsigned long destination, status;
-	int maxsze = usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe));
-	int len = urb->transfer_buffer_length;
-	struct urb_priv *urbp = (struct urb_priv *)urb->hcpriv;
-	dma_addr_t data = urb->transfer_dma;
-
-	if (len < 0)
-		return -EINVAL;
+	int ret;
 
 	/* Can't have low speed bulk transfers */
 	if (urb->dev->speed == USB_SPEED_LOW)
 		return -EINVAL;
 
-	/* The "pipe" thing contains the destination in bits 8--18 */
-	destination = (urb->pipe & PIPE_DEVEP_MASK) | usb_packetid(urb->pipe);
-
-	/* 3 errors */
-	status = TD_CTRL_ACTIVE | uhci_maxerr(3);
-	if (!(urb->transfer_flags & URB_SHORT_NOT_OK))
-		status |= TD_CTRL_SPD;
-
-	/*
-	 * Build the DATA TD's
-	 */
-	do {	/* Allow zero length packets */
-		int pktsze = len;
-
-		if (pktsze > maxsze)
-			pktsze = maxsze;
-
-		td = uhci_alloc_td(uhci, urb->dev);
-		if (!td)
-			return -ENOMEM;
-
-		uhci_add_td_to_urb(urb, td);
-		uhci_fill_td(td, status, destination | uhci_explen(pktsze - 1) |
-			(usb_gettoggle(urb->dev, usb_pipeendpoint(urb->pipe),
-			 usb_pipeout(urb->pipe)) << TD_TOKEN_TOGGLE_SHIFT),
-			data);
-
-		data += pktsze;
-		len -= maxsze;
-
-		usb_dotoggle(urb->dev, usb_pipeendpoint(urb->pipe),
-			usb_pipeout(urb->pipe));
-	} while (len > 0);
-
-	/*
-	 * USB_ZERO_PACKET means adding a 0-length packet, if
-	 * direction is OUT and the transfer_length was an
-	 * exact multiple of maxsze, hence
-	 * (len = transfer_length - N * maxsze) == 0
-	 * however, if transfer_length == 0, the zero packet
-	 * was already prepared above.
-	 */
-	if (usb_pipeout(urb->pipe) && (urb->transfer_flags & USB_ZERO_PACKET) &&
-	   !len && urb->transfer_buffer_length) {
-		td = uhci_alloc_td(uhci, urb->dev);
-		if (!td)
-			return -ENOMEM;
-
-		uhci_add_td_to_urb(urb, td);
-		uhci_fill_td(td, status, destination | uhci_explen(UHCI_NULL_DATA_SIZE) |
-			(usb_gettoggle(urb->dev, usb_pipeendpoint(urb->pipe),
-			 usb_pipeout(urb->pipe)) << TD_TOKEN_TOGGLE_SHIFT),
-			data);
-
-		usb_dotoggle(urb->dev, usb_pipeendpoint(urb->pipe),
-			usb_pipeout(urb->pipe));
-	}
-
-	/* Set the flag on the last packet */
-	td->status |= cpu_to_le32(TD_CTRL_IOC);
-
-	qh = uhci_alloc_qh(uhci, urb->dev);
-	if (!qh)
-		return -ENOMEM;
-
-	urbp->qh = qh;
-	qh->urbp = urbp;
-
-	/* Always breadth first */
-	uhci_insert_tds_in_qh(qh, urb, UHCI_PTR_BREADTH);
+	ret = uhci_submit_common(uhci, urb, eurb, uhci->skel_bulk_qh);
+	if (ret == -EINPROGRESS)
+		uhci_inc_fsbr(uhci, urb);
 
-	if (eurb)
-		uhci_append_queued_urb(uhci, eurb, urb);
-	else
-		uhci_insert_qh(uhci, uhci->skel_bulk_qh, urb);
+	return ret;
+}
 
-	uhci_inc_fsbr(uhci, urb);
+static inline int uhci_submit_interrupt(struct uhci_hcd *uhci, struct urb *urb, struct urb *eurb)
+{
+	/* Interrupt-IN can't be more than 1 packet */
+	if (usb_pipein(urb->pipe) && urb->transfer_buffer_length > usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)))
+		return -EINVAL;
 
-	return -EINPROGRESS;
+	return uhci_submit_common(uhci, urb, eurb, uhci->skelqh[__interval_to_skel(urb->interval)]);
 }
 
-/* We can use the result interrupt since they're identical */
-#define uhci_result_bulk uhci_result_interrupt
+/*
+ * Bulk and interrupt use common result
+ */
+#define uhci_result_bulk uhci_result_common
+#define uhci_result_interrupt uhci_result_common
 
 /*
  * Isochronous transfers
@@ -1457,31 +1448,27 @@ static int uhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, int mem_flags)
 
 	switch (usb_pipetype(urb->pipe)) {
 	case PIPE_CONTROL:
-		if (eurb)
-			ret = -ENXIO;		/* no control queueing yet */
-		else
-			ret = uhci_submit_control(uhci, urb);
+		ret = uhci_submit_control(uhci, urb, eurb);
 		break;
 	case PIPE_INTERRUPT:
-		if (eurb)
-			ret = -ENXIO;		/* no interrupt queueing yet */
-		else if (urb->bandwidth == 0) {	/* not yet checked/allocated */
+		if (!eurb) {
 			bustime = usb_check_bandwidth(urb->dev, urb);
 			if (bustime < 0)
 				ret = bustime;
 			else {
-				ret = uhci_submit_interrupt(uhci, urb);
+				ret = uhci_submit_interrupt(uhci, urb, eurb);
 				if (ret == -EINPROGRESS)
 					usb_claim_bandwidth(urb->dev, urb, bustime, 0);
 			}
-		} else		/* bandwidth is already set */
-			ret = uhci_submit_interrupt(uhci, urb);
+		} else {	/* inherit from parent */
+			urb->bandwidth = eurb->bandwidth;
+			ret = uhci_submit_interrupt(uhci, urb, eurb);
+		}
 		break;
 	case PIPE_BULK:
 		ret = uhci_submit_bulk(uhci, urb, eurb);
 		break;
 	case PIPE_ISOCHRONOUS:
-		if (urb->bandwidth == 0) {	/* not yet checked/allocated */
 		bustime = usb_check_bandwidth(urb->dev, urb);
 		if (bustime < 0) {
 			ret = bustime;
@@ -1491,17 +1478,22 @@ static int uhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, int mem_flags)
 		ret = uhci_submit_isochronous(uhci, urb);
 		if (ret == -EINPROGRESS)
 			usb_claim_bandwidth(urb->dev, urb, bustime, 1);
-		} else		/* bandwidth is already set */
-			ret = uhci_submit_isochronous(uhci, urb);
 		break;
 	}
 
-	spin_unlock_irqrestore(&uhci->urb_list_lock, flags);
-
 	if (ret != -EINPROGRESS) {
+		/* Submit failed, so delete it from the urb_list */
+		struct urb_priv *urbp = urb->hcpriv;
+
+		list_del_init(&urbp->urb_list);
+		spin_unlock_irqrestore(&uhci->urb_list_lock, flags);
 		uhci_destroy_urb_priv (uhci, urb);
+
 		return ret;
 	}
+
+	spin_unlock_irqrestore(&uhci->urb_list_lock, flags);
+
 	return 0;
 }
 
@@ -1556,14 +1548,17 @@ static void uhci_transfer_result(struct uhci_hcd *uhci, struct urb *urb)
 		uhci_unlink_generic(uhci, urb);
 		break;
 	case PIPE_INTERRUPT:
-		/* Interrupts are an exception */
-		if (urb->interval)
-			goto out_complete;
-
 		/* Release bandwidth for Interrupt or Isoc. transfers */
+		/* Make sure we don't release if we have a queued URB */
+		spin_lock(&uhci->frame_list_lock);
 		/* Spinlock needed ? */
-		if (urb->bandwidth)
+		if (list_empty(&urbp->queue_list) && urb->bandwidth)
 			usb_release_bandwidth(urb->dev, urb, 0);
+		else
+			/* bandwidth was passed on to queued URB, */
+			/* so don't let usb_unlink_urb() release it */
+			urb->bandwidth = 0;
+		spin_unlock(&uhci->frame_list_lock);
 		uhci_unlink_generic(uhci, urb);
 		break;
 	default:
@@ -1574,7 +1569,6 @@ static void uhci_transfer_result(struct uhci_hcd *uhci, struct urb *urb)
 	/* Remove it from uhci->urb_list */
 	list_del_init(&urbp->urb_list);
 
-out_complete:
 	uhci_add_complete(uhci, urb);
 
 out:
@@ -1643,6 +1637,13 @@ static int uhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb)
 	unsigned long flags;
 	struct urb_priv *urbp = urb->hcpriv;
 
+	/* If this is an interrupt URB that is being killed in urb->complete, */
+	/* then just set its status and return */
+	if (!urbp) {
+	  urb->status = -ECONNRESET;
+	  return 0;
+	}
+
 	spin_lock_irqsave(&uhci->urb_list_lock, flags);
 
 	list_del_init(&urbp->urb_list);
@@ -1805,38 +1806,42 @@ static void uhci_finish_urb(struct usb_hcd *hcd, struct urb *urb)
 	struct urb_priv *urbp = (struct urb_priv *)urb->hcpriv;
 	struct usb_device *dev = urb->dev;
 	struct uhci_hcd *uhci = hcd_to_uhci(hcd);
-	int killed, resubmit_interrupt, status;
+	int killed, resubmit_interrupt, status, ret;
 	unsigned long flags;
 
 	spin_lock_irqsave(&urb->lock, flags);
 
  	killed = (urb->status == -ENOENT || urb->status == -ECONNRESET);
 	resubmit_interrupt = (usb_pipetype(urb->pipe) == PIPE_INTERRUPT &&
-			urb->interval);
+			urb->interval && !killed);
 
 	status = urbp->status;
-	if (!resubmit_interrupt || killed)
-		/* We don't need urb_priv anymore */
 	uhci_destroy_urb_priv(uhci, urb);
 
 	if (!killed)
 		urb->status = status;
 	spin_unlock_irqrestore(&urb->lock, flags);
 
-	if (resubmit_interrupt)
+	if (resubmit_interrupt) {
 		urb->complete(urb);
-	else
-		usb_hcd_giveback_urb(hcd, urb);
 
-	if (resubmit_interrupt)
 		/* Recheck the status. The completion handler may have */
 		/* unlinked the resubmitting interrupt URB */
-		killed = (urb->status == -ENOENT || urb->status == -ECONNRESET);
+		/* Note that this doesn't do what usb_hcd_giveback_urb() */
+		/* normally does, so that doesn't ever get done. */
+		if (urb->status == -ECONNRESET) {
+			usb_put_urb(urb);
+			return;
+		}
 
-	if (resubmit_interrupt && !killed) {
 		urb->dev = dev;
-		uhci_reset_interrupt(uhci, urb);
-	}
+		urb->status = -EINPROGRESS;
+		urb->actual_length = 0;
+		urb->bandwidth = 0;
+		if ((ret = uhci_urb_enqueue(&uhci->hcd, urb, 0)))
+			printk(KERN_ERR __FILE__ ": could not resubmit interrupt URB : %d\n", ret);		  
+	} else
+		usb_hcd_giveback_urb(hcd, urb);
 }
 
 static void uhci_finish_completion(struct usb_hcd *hcd)
@@ -2041,10 +2046,9 @@ static void release_uhci(struct uhci_hcd *uhci)
 			uhci->skelqh[i] = NULL;
 		}
 
-	for (i = 0; i < UHCI_NUM_SKELTD; i++)
-		if (uhci->skeltd[i]) {
-			uhci_free_td(uhci, uhci->skeltd[i]);
-			uhci->skeltd[i] = NULL;
+	if (uhci->term_td) {
+		uhci_free_td(uhci, uhci->term_td);
+		uhci->term_td = NULL;
 	}
 
 	if (uhci->qh_pool) {
@@ -2193,34 +2197,10 @@ static int __devinit uhci_start(struct usb_hcd *hcd)
 		goto err_alloc_root_hub;
 	}
 
-	uhci->skeltd[0] = uhci_alloc_td(uhci, udev);
-	if (!uhci->skeltd[0]) {
-		err("unable to allocate TD 0");
-		goto err_alloc_skeltd;
-	}
-
-	/*
-	 * 9 Interrupt queues; link int2 to int1, int4 to int2, etc
-	 * then link int1 to control and control to bulk
-	 */
-	for (i = 1; i < 9; i++) {
-		struct uhci_td *td;
-
-		td = uhci->skeltd[i] = uhci_alloc_td(uhci, udev);
-		if (!td) {
-			err("unable to allocate TD %d", i);
-			goto err_alloc_skeltd;
-		}
-
-		uhci_fill_td(td, 0, uhci_explen(UHCI_NULL_DATA_SIZE) |
-			(0x7f << TD_TOKEN_DEVADDR_SHIFT) | USB_PID_IN, 0);
-		td->link = cpu_to_le32(uhci->skeltd[i - 1]->dma_handle);
-	}
-
-	uhci->skel_term_td = uhci_alloc_td(uhci, udev);
-	if (!uhci->skel_term_td) {
-		err("unable to allocate skel TD term");
-		goto err_alloc_skeltd;
+	uhci->term_td = uhci_alloc_td(uhci, udev);
+	if (!uhci->term_td) {
+		err("unable to allocate terminating TD");
+		goto err_alloc_term_td;
 	}
 
 	for (i = 0; i < UHCI_NUM_SKELQH; i++) {
@@ -2231,26 +2211,30 @@ static int __devinit uhci_start(struct usb_hcd *hcd)
 		}
 	}
 
-	uhci_fill_td(uhci->skel_int1_td, 0, (UHCI_NULL_DATA_SIZE << 21) |
-		(0x7f << TD_TOKEN_DEVADDR_SHIFT) | USB_PID_IN, 0);
-	uhci->skel_int1_td->link = cpu_to_le32(uhci->skel_ls_control_qh->dma_handle) | UHCI_PTR_QH;
+	/*
+	 * 8 Interrupt queues; link int2 to int1, int4 to int2, etc
+	 * then link int1 to control and control to bulk
+	 */
+	uhci->skel_int128_qh->link = cpu_to_le32(uhci->skel_int64_qh->dma_handle) | UHCI_PTR_QH;
+	uhci->skel_int64_qh->link = cpu_to_le32(uhci->skel_int32_qh->dma_handle) | UHCI_PTR_QH;
+	uhci->skel_int32_qh->link = cpu_to_le32(uhci->skel_int16_qh->dma_handle) | UHCI_PTR_QH;
+	uhci->skel_int16_qh->link = cpu_to_le32(uhci->skel_int8_qh->dma_handle) | UHCI_PTR_QH;
+	uhci->skel_int8_qh->link = cpu_to_le32(uhci->skel_int4_qh->dma_handle) | UHCI_PTR_QH;
+	uhci->skel_int4_qh->link = cpu_to_le32(uhci->skel_int2_qh->dma_handle) | UHCI_PTR_QH;
+	uhci->skel_int2_qh->link = cpu_to_le32(uhci->skel_int1_qh->dma_handle) | UHCI_PTR_QH;
+	uhci->skel_int1_qh->link = cpu_to_le32(uhci->skel_ls_control_qh->dma_handle) | UHCI_PTR_QH;
 
 	uhci->skel_ls_control_qh->link = cpu_to_le32(uhci->skel_hs_control_qh->dma_handle) | UHCI_PTR_QH;
-	uhci->skel_ls_control_qh->element = UHCI_PTR_TERM;
-
 	uhci->skel_hs_control_qh->link = cpu_to_le32(uhci->skel_bulk_qh->dma_handle) | UHCI_PTR_QH;
-	uhci->skel_hs_control_qh->element = UHCI_PTR_TERM;
-
 	uhci->skel_bulk_qh->link = cpu_to_le32(uhci->skel_term_qh->dma_handle) | UHCI_PTR_QH;
-	uhci->skel_bulk_qh->element = UHCI_PTR_TERM;
 
 	/* This dummy TD is to work around a bug in Intel PIIX controllers */
-	uhci_fill_td(uhci->skel_term_td, 0, (UHCI_NULL_DATA_SIZE << 21) |
+	uhci_fill_td(uhci->term_td, 0, (UHCI_NULL_DATA_SIZE << 21) |
 		(0x7f << TD_TOKEN_DEVADDR_SHIFT) | USB_PID_IN, 0);
-	uhci->skel_term_td->link = cpu_to_le32(uhci->skel_term_td->dma_handle);
+	uhci->term_td->link = cpu_to_le32(uhci->term_td->dma_handle);
 
 	uhci->skel_term_qh->link = UHCI_PTR_TERM;
-	uhci->skel_term_qh->element = cpu_to_le32(uhci->skel_term_td->dma_handle);
+	uhci->skel_term_qh->element = cpu_to_le32(uhci->term_td->dma_handle);
 
 	/*
 	 * Fill the frame list: make all entries point to
@@ -2285,7 +2269,7 @@ static int __devinit uhci_start(struct usb_hcd *hcd)
 		}
 
 		/* Only place we don't use the frame list routines */
-		uhci->fl->frame[i] = cpu_to_le32(uhci->skeltd[irq]->dma_handle);
+		uhci->fl->frame[i] = cpu_to_le32(uhci->skelqh[7 - irq]->dma_handle);
 	}
 
 	start_hc(uhci);
@@ -2314,20 +2298,17 @@ static int __devinit uhci_start(struct usb_hcd *hcd)
 
 	del_timer_sync(&uhci->stall_timer);
 
+err_alloc_skelqh:
 	for (i = 0; i < UHCI_NUM_SKELQH; i++)
 		if (uhci->skelqh[i]) {
 			uhci_free_qh(uhci, uhci->skelqh[i]);
 			uhci->skelqh[i] = NULL;
 		}
 
-err_alloc_skelqh:
-	for (i = 0; i < UHCI_NUM_SKELTD; i++)
-		if (uhci->skeltd[i]) {
-			uhci_free_td(uhci, uhci->skeltd[i]);
-			uhci->skeltd[i] = NULL;
-		}
+	uhci_free_td(uhci, uhci->term_td);
+	uhci->term_td = NULL;
 
-err_alloc_skeltd:
+err_alloc_term_td:
 	usb_free_dev(udev);
 	hcd->self.root_hub = NULL;
 
@@ -2517,7 +2498,7 @@ static int __init uhci_hcd_init(void)
 up_failed:
 
 #ifdef CONFIG_PROC_FS
-	remove_proc_entry("uhci", 0);
+	remove_proc_entry("driver/uhci", 0);
 
 proc_failed:
 #endif
@@ -2537,7 +2518,7 @@ static void __exit uhci_hcd_cleanup(void)
 		printk(KERN_INFO "uhci: not all urb_priv's were freed\n");
 
 #ifdef CONFIG_PROC_FS
-	remove_proc_entry("uhci", 0);
+	remove_proc_entry("driver/uhci", 0);
 #endif
 
 	if (errbuf)

drivers/usb/host/uhci-hcd.h

@@ -81,7 +81,8 @@ struct uhci_frame_list {
 
 struct urb_priv;
 
-/* One role of a QH is to hold a queue of TDs for some endpoint.  Each QH is
+/*
+ * One role of a QH is to hold a queue of TDs for some endpoint.  Each QH is
  * used with one URB, and qh->element (updated by the HC) is either:
  *   - the next unprocessed TD for the URB, or
  *   - UHCI_PTR_TERM (when there's no more traffic for this endpoint), or
@@ -194,85 +195,63 @@ struct uhci_td {
 } __attribute__((aligned(16)));
 
 /*
- * There are various standard queues. We set up several different
- * queues for each of the three basic queue types: interrupt,
- * control, and bulk.
- *
- *  - There are various different interrupt latencies: ranging from
- *    every other USB frame (2 ms apart) to every 256 USB frames (ie
- *    256 ms apart). Make your choice according to how obnoxious you
- *    want to be on the wire, vs how critical latency is for you.
- *  - The control list is done every frame.
- *  - There are 4 bulk lists, so that up to four devices can have a
- *    bulk list of their own and when run concurrently all four lists
- *    will be be serviced.
- *
- * This is a bit misleading, there are various interrupt latencies, but they
- * vary a bit, interrupt2 isn't exactly 2ms, it can vary up to 4ms since the
- * other queues can "override" it. interrupt4 can vary up to 8ms, etc. Minor
- * problem
- *
- * In the case of the root hub, these QH's are just head's of qh's. Don't
- * be scared, it kinda makes sense. Look at this wonderful picture care of
- * Linus:
+ * The UHCI driver places Interrupt, Control and Bulk into QH's both
+ * to group together TD's for one transfer, and also to faciliate queuing
+ * of URB's. To make it easy to insert entries into the schedule, we have
+ * a skeleton of QH's for each predefined Interrupt latency, low speed
+ * control, high speed control and terminating QH (see explanation for
+ * the terminating QH below).
  *
- *  generic-  ->  dev1-  ->  generic-  ->  dev1-  ->  control-  ->  bulk- -> ...
- *   iso-QH      iso-QH       irq-QH      irq-QH        QH           QH
- *      |           |            |           |           |            |
- *     End     dev1-iso-TD1     End     dev1-irq-TD1    ...          ... 
- *                  |
- *             dev1-iso-TD2
- *                  |
- *                ....
+ * When we want to add a new QH, we add it to the end of the list for the
+ * skeleton QH.
  *
- * This may vary a bit (the UHCI docs don't explicitly say you can put iso
- * transfers in QH's and all of their pictures don't have that either) but
- * other than that, that is what we're doing now
+ * For instance, the queue can look like this:
  *
- * And now we don't put Iso transfers in QH's, so we don't waste one on it
- * --jerdfelt
+ * skel int128 QH
+ * dev 1 interrupt QH
+ * dev 5 interrupt QH
+ * skel int64 QH
+ * skel int32 QH
+ * ...
+ * skel int1 QH
+ * skel low speed control QH
+ * dev 5 control QH
+ * skel high speed control QH
+ * skel bulk QH
+ * dev 1 bulk QH
+ * dev 2 bulk QH
+ * skel terminating QH
  *
- * To keep with Linus' nomenclature, this is called the QH skeleton. These
- * labels (below) are only signficant to the root hub's QH's
+ * The terminating QH is used for 2 reasons:
+ * - To place a terminating TD which is used to workaround a PIIX bug
+ *   (see Intel errata for explanation)
+ * - To loop back to the high speed control queue for full speed bandwidth
+ *   reclamation
  *
- *
- * NOTE:  That ASCII art doesn't match the current (August 2002) code, in
- * more ways than just not using QHs for ISO.
- *
- * NOTE:  Another way to look at the UHCI schedules is to compare them to what
- * other host controller interfaces use.  EHCI, OHCI, and UHCI all have tables
- * of transfers that the controller scans, frame by frame, and which hold the
- * scheduled periodic transfers.  The key differences are that UHCI
- *
- *   (a) puts control and bulk transfers into that same table; the others
- *       have separate data structures for non-periodic transfers.
- *   (b) lets QHs be linked from TDs, not just other QHs, since they don't
- *       hold endpoint data.  this driver chooses to use one QH per URB.
- *   (c) needs more TDs, since it uses one per packet.  the data toggle
- *       is stored in those TDs, along with all other endpoint state.
+ * Isochronous transfers are stored before the start of the skeleton
+ * schedule and don't use QH's. While the UHCI spec doesn't forbid the
+ * use of QH's for Isochronous, it doesn't use them either. Since we don't
+ * need to use them either, we follow the spec diagrams in hope that it'll
+ * be more compatible with future UHCI implementations.
  */
 
-#define UHCI_NUM_SKELTD		10
-#define skel_int1_td		skeltd[0]
-#define skel_int2_td		skeltd[1]
-#define skel_int4_td		skeltd[2]
-#define skel_int8_td		skeltd[3]
-#define skel_int16_td		skeltd[4]
-#define skel_int32_td		skeltd[5]
-#define skel_int64_td		skeltd[6]
-#define skel_int128_td		skeltd[7]
-#define skel_int256_td		skeltd[8]
-#define skel_term_td		skeltd[9]	/* To work around PIIX UHCI bug */
-
-#define UHCI_NUM_SKELQH		4
-#define skel_ls_control_qh	skelqh[0]
-#define skel_hs_control_qh	skelqh[1]
-#define skel_bulk_qh		skelqh[2]
-#define skel_term_qh		skelqh[3]
+#define UHCI_NUM_SKELQH		12
+#define skel_int128_qh		skelqh[0]
+#define skel_int64_qh		skelqh[1]
+#define skel_int32_qh		skelqh[2]
+#define skel_int16_qh		skelqh[3]
+#define skel_int8_qh		skelqh[4]
+#define skel_int4_qh		skelqh[5]
+#define skel_int2_qh		skelqh[6]
+#define skel_int1_qh		skelqh[7]
+#define skel_ls_control_qh	skelqh[8]
+#define skel_hs_control_qh	skelqh[9]
+#define skel_bulk_qh		skelqh[10]
+#define skel_term_qh		skelqh[11]
 
 /*
- * Search tree for determining where <interval> fits in the
- * skelqh[] skeleton.
+ * Search tree for determining where <interval> fits in the skelqh[]
+ * skeleton.
  *
  * An interrupt request should be placed into the slowest skelqh[]
  * which meets the interval/period/frequency requirement.
@@ -280,32 +259,27 @@ struct uhci_td {
  *
  * For a given <interval>, this function returns the appropriate/matching
  * skelqh[] index value.
- *
- * NOTE: For UHCI, we don't really need int256_qh since the maximum interval
- * is 255 ms.  However, we do need an int1_qh since 1 is a valid interval
- * and we should meet that frequency when requested to do so.
- * This will require some change(s) to the UHCI skeleton.
  */
 static inline int __interval_to_skel(int interval)
 {
 	if (interval < 16) {
 		if (interval < 4) {
 			if (interval < 2)
-				return 0;	/* int1 for 0-1 ms */
-			return 1;		/* int2 for 2-3 ms */
+				return 7;	/* int1 for 0-1 ms */
+			return 6;		/* int2 for 2-3 ms */
 		}
 		if (interval < 8)
-			return 2;		/* int4 for 4-7 ms */
-		return 3;			/* int8 for 8-15 ms */
+			return 5;		/* int4 for 4-7 ms */
+		return 4;			/* int8 for 8-15 ms */
 	}
 	if (interval < 64) {
 		if (interval < 32)
-			return 4;		/* int16 for 16-31 ms */
-		return 5;			/* int32 for 32-63 ms */
+			return 3;		/* int16 for 16-31 ms */
+		return 2;			/* int32 for 32-63 ms */
 	}
 	if (interval < 128)
-		return 6;			/* int64 for 64-127 ms */
-	return 7;				/* int128 for 128-255 ms (Max.) */
+		return 1;			/* int64 for 64-127 ms */
+	return 0;				/* int128 for 128-255 ms (Max.) */
 }
 
 #define hcd_to_uhci(hcd_ptr) container_of(hcd_ptr, struct uhci_hcd, hcd)
@@ -332,7 +306,7 @@ struct uhci_hcd {
 
 	struct usb_bus *bus;
 
-	struct uhci_td *skeltd[UHCI_NUM_SKELTD];	/* Skeleton TD's */
+	struct uhci_td *term_td;	/* Terminating TD, see UHCI bug */
 	struct uhci_qh *skelqh[UHCI_NUM_SKELQH];	/* Skeleton QH's */
 
 	spinlock_t frame_list_lock;

drivers/usb/input/Config.help

@@ -63,7 +63,8 @@ CONFIG_USB_KBD
   to use the generic HID driver for your USB keyboard and prefer
   to use the keyboard in its limited Boot Protocol mode instead.
 
-  This is almost certainly not what you want.
+  This is almost certainly not what you want.  This is mostly
+  useful for embedded applications or simple keyboards.
 
   This code is also available as a module ( = code which can be
   inserted in and removed from the running kernel whenever you want).
@@ -77,7 +78,8 @@ CONFIG_USB_MOUSE
   to use the generic HID driver for your USB keyboard and prefer
   to use the keyboard in its limited Boot Protocol mode instead.
 
-  This is almost certainly not what you want.
+  This is almost certainly not what you want.  This is mostly
+  useful for embedded applications or simple mice.
 
   This code is also available as a module ( = code which can be
   inserted in and removed from the running kernel whenever you want).

drivers/usb/input/Config.in

@@ -15,8 +15,11 @@ dep_mbool '        Logitech WingMan *3D support' CONFIG_LOGITECH_FF $CONFIG_USB_
 dep_mbool '    /dev/hiddev raw HID device support' CONFIG_USB_HIDDEV $CONFIG_USB_HID
 
 if [ "$CONFIG_USB_HID" != "y" ]; then
-   dep_tristate '  USB HIDBP Keyboard (basic) support' CONFIG_USB_KBD $CONFIG_USB $CONFIG_INPUT
-   dep_tristate '  USB HIDBP Mouse (basic) support' CONFIG_USB_MOUSE $CONFIG_USB $CONFIG_INPUT
+   mainmenu_option next_comment
+   comment 'USB HID Boot Protocol drivers'
+   dep_tristate '  USB HIDBP Keyboard (simple Boot) support' CONFIG_USB_KBD $CONFIG_USB $CONFIG_INPUT
+   dep_tristate '  USB HIDBP Mouse (simple Boot) support' CONFIG_USB_MOUSE $CONFIG_USB $CONFIG_INPUT
+   endmenu
 fi
 
 dep_tristate '  Aiptek 6000U/8000U tablet support' CONFIG_USB_AIPTEK $CONFIG_USB $CONFIG_INPUT

drivers/usb/misc/usbtest.c

@@ -109,7 +109,7 @@ static struct urb *simple_alloc_urb (
 	usb_fill_bulk_urb (urb, udev, pipe, 0, bytes, simple_callback, 0);
 	urb->interval = (udev->speed == USB_SPEED_HIGH)
 			? (INTERRUPT_RATE << 3)
-			: INTERRUPT_RATE,
+			: INTERRUPT_RATE;
 	urb->transfer_flags = URB_NO_DMA_MAP;
 	if (usb_pipein (pipe))
 		urb->transfer_flags |= URB_SHORT_NOT_OK;
@@ -142,7 +142,7 @@ static int simple_io (
 	int			retval = 0;
 
 	urb->context = &completion;
-	while (iterations-- > 0 && retval == 0) {
+	while (retval == 0 && iterations-- > 0) {
 		init_completion (&completion);
 		if ((retval = usb_submit_urb (urb, SLAB_KERNEL)) != 0)
 			break;
@@ -155,7 +155,7 @@ static int simple_io (
 		if (vary) {
 			int	len = urb->transfer_buffer_length;
 
-			len += max;
+			len += vary;
 			len %= max;
 			if (len == 0)
 				len = (vary < max) ? vary : max;
@@ -347,7 +347,7 @@ static int set_altsetting (struct usbtest_dev *dev, int alternate)
 		ep &= USB_ENDPOINT_NUMBER_MASK;
 		usb_settoggle (udev, ep, out, 0);
 		(out ? udev->epmaxpacketout : udev->epmaxpacketin ) [ep]
-			= iface_as->endpoint [ep].wMaxPacketSize;
+			= iface_as->endpoint [i].wMaxPacketSize;
 	}
 
 	return 0;
@@ -659,7 +659,7 @@ static int usbtest_ioctl (struct usb_interface *intf, unsigned int code, void *b
 			break;
 		dbg ("%s TEST 4:  read/%d 0..%d bytes %u times", dev->id,
 				param->vary, param->length, param->iterations);
-		urb = simple_alloc_urb (udev, dev->out_pipe, param->length);
+		urb = simple_alloc_urb (udev, dev->in_pipe, param->length);
 		if (!urb) {
 			retval = -ENOMEM;
 			break;
@@ -907,6 +907,14 @@ static struct usbtest_info ez2_info = {
 	.alt		= 1,
 };
 
+/* ezusb family device with dedicated usb test firmware*/
+static struct usbtest_info fw_info = {
+	.name		= "usb test device",
+	.ep_in		= 2,
+	.ep_out		= 2,
+	.alt		= 0,
+};
+
 #ifdef IBOT2
 /* this is a nice source of high speed bulk data;
  * uses an FX2, with firmware provided in the device
@@ -962,6 +970,11 @@ static struct usb_device_id id_table [] = {
 		.driver_info = (unsigned long) &ez2_info,
 		},
 
+	/* re-enumerated usb test device firmware */
+	{ USB_DEVICE (0xfff0, 0xfff0),
+		.driver_info = (unsigned long) &fw_info,
+		},
+
 #ifdef KEYSPAN_19Qi
 	/* Keyspan 19qi uses an21xx (original EZ-USB) */
 	// this does not coexist with the real Keyspan 19qi driver!

drivers/usb/net/pegasus.h

@@ -135,6 +135,7 @@ struct usb_eth_dev {
 #define	VENDOR_SMC		0x0707
 #define	VENDOR_SOHOWARE		0x15e8
 #define	VENDOR_SIEMENS		0x067c
+#define	VENDOR_JTEC		0x11ad
 
 
 #else	/* PEGASUS_DEV */
@@ -257,6 +258,8 @@ PEGASUS_DEV( "SOHOware NUB110 Ethernet", VENDOR_SOHOWARE, 0x9110,
 		DEFAULT_GPIO_RESET | PEGASUS_II )
 PEGASUS_DEV( "SpeedStream USB 10/100 Ethernet", VENDOR_SIEMENS, 0x1001,
 		DEFAULT_GPIO_RESET | PEGASUS_II )
+PEGASUS_DEV( "FA8101 USB To ETHERNET", VENDOR_JTEC, 0x8101,
+		DEFAULT_GPIO_RESET | PEGASUS_II )
 
 
 #endif	/* PEGASUS_DEV */

drivers/usb/storage/transport.c

@@ -647,6 +647,7 @@ int usb_stor_bulk_transfer_buf(struct us_data *us, unsigned int pipe,
 
 	/* no error code, so we must have transferred some data, 
 	 * just not all of it */
+	US_DEBUGP("-- transferred only %d bytes\n", partial);
 	return USB_STOR_XFER_SHORT;
 }
 
@@ -654,15 +655,15 @@ int usb_stor_bulk_transfer_buf(struct us_data *us, unsigned int pipe,
  * Transfer an entire SCSI command's worth of data payload over the bulk
  * pipe.
  *
- * Note that this uses usb_stor_transfer_buf to achieve its goals -- this
- * function simply determines if we're going to use scatter-gather or not,
- * and acts appropriately.  For now, it also re-interprets the error codes.
+ * Note that this uses usb_stor_bulk_transfer_buf to achieve its goals --
+ * this function simply determines if we're going to use scatter-gather or not,
+ * and acts appropriately.
  */
 int usb_stor_bulk_transfer_sg(struct us_data* us, unsigned int pipe,
 		char *buf, unsigned int length_left, int use_sg, int *residual)
 {
 	int i;
-	int result = -1;
+	int result = USB_STOR_XFER_ERROR;
 	struct scatterlist *sg;
 	unsigned int amount;
 	unsigned int partial;
@@ -1046,9 +1047,11 @@ int usb_stor_CBI_transport(Scsi_Cmnd *srb, struct us_data *us)
 
 	/* DATA STAGE */
 	/* transfer the data payload for this command, if one exists*/
-	if (transfer_length > 0) {
-		result = usb_stor_bulk_transfer_srb(us, us->send_bulk_pipe,
-				srb, transfer_length);
+	if (transfer_length) {
+		unsigned int pipe = srb->sc_data_direction == SCSI_DATA_READ ? 
+				us->recv_bulk_pipe : us->send_bulk_pipe;
+		result = usb_stor_bulk_transfer_srb(us, pipe, srb,
+					transfer_length);
 		US_DEBUGP("CBI data stage result is 0x%x\n", result);
 
 		/* report any errors */
@@ -1140,6 +1143,7 @@ int usb_stor_CB_transport(Scsi_Cmnd *srb, struct us_data *us)
 	if (atomic_read(&us->sm_state) == US_STATE_ABORTING) {
 		US_DEBUGP("usb_stor_CB_transport(): transfer aborted\n");
 		return USB_STOR_TRANSPORT_ABORTED;
+	}
 
 	if (result != USB_STOR_XFER_GOOD) {
 		/* Uh oh... serious problem here */
@@ -1148,9 +1152,11 @@ int usb_stor_CB_transport(Scsi_Cmnd *srb, struct us_data *us)
 
 	/* DATA STAGE */
 	/* transfer the data payload for this command, if one exists*/
-	if (transfer_length)
-		result = usb_stor_bulk_transfer_srb(us, us->send_bulk_pipe,
-				srb, transfer_length);
+	if (transfer_length) {
+		unsigned int pipe = srb->sc_data_direction == SCSI_DATA_READ ? 
+				us->recv_bulk_pipe : us->send_bulk_pipe;
+		result = usb_stor_bulk_transfer_srb(us, pipe, srb,
+					transfer_length);
 		US_DEBUGP("CB data stage result is 0x%x\n", result);
 
 		/* report any errors */