Commit 06a5f7f1 authored by Alexander Duyck's avatar Alexander Duyck Committed by David S. Miller

i40e: Move all UDP port notifiers to single function

This patch goes through and combines the notifiers for VXLAN and GENEVE
into a single function for each action.  So there is now one combined
function for getting ports, one for adding the ports, and one for deleting
the ports.
Signed-off-by: default avatarAlexander Duyck <aduyck@mirantis.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent f174cdbe
......@@ -236,27 +236,6 @@ config I40E
To compile this driver as a module, choose M here. The module
will be called i40e.
config I40E_VXLAN
bool "Virtual eXtensible Local Area Network Support"
default n
depends on I40E && VXLAN && !(I40E=y && VXLAN=m)
---help---
This allows one to create VXLAN virtual interfaces that provide
Layer 2 Networks over Layer 3 Networks. VXLAN is often used
to tunnel virtual network infrastructure in virtualized environments.
Say Y here if you want to use Virtual eXtensible Local Area Network
(VXLAN) in the driver.
config I40E_GENEVE
bool "Generic Network Virtualization Encapsulation (GENEVE) Support"
depends on I40E && GENEVE && !(I40E=y && GENEVE=m)
default n
---help---
This allows one to create GENEVE virtual interfaces that provide
Layer 2 Networks over Layer 3 Networks. GENEVE is often used
to tunnel virtual network infrastructure in virtualized environments.
Say Y here if you want to use GENEVE in the driver.
config I40E_DCB
bool "Data Center Bridging (DCB) Support"
default n
......
......@@ -31,12 +31,7 @@
/* Local includes */
#include "i40e.h"
#include "i40e_diag.h"
#if IS_ENABLED(CONFIG_VXLAN)
#include <net/vxlan.h>
#endif
#if IS_ENABLED(CONFIG_GENEVE)
#include <net/geneve.h>
#endif
#include <net/udp_tunnel.h>
const char i40e_driver_name[] = "i40e";
static const char i40e_driver_string[] =
......@@ -5342,14 +5337,7 @@ int i40e_open(struct net_device *netdev)
TCP_FLAG_CWR) >> 16);
wr32(&pf->hw, I40E_GLLAN_TSOMSK_L, be32_to_cpu(TCP_FLAG_CWR) >> 16);
#ifdef CONFIG_I40E_VXLAN
vxlan_get_rx_port(netdev);
#endif
#ifdef CONFIG_I40E_GENEVE
if (pf->flags & I40E_FLAG_GENEVE_OFFLOAD_CAPABLE)
geneve_get_rx_port(netdev);
#endif
udp_tunnel_get_rx_info(netdev);
i40e_notify_client_of_netdev_open(vsi);
return 0;
......@@ -7057,7 +7045,6 @@ static void i40e_handle_mdd_event(struct i40e_pf *pf)
**/
static void i40e_sync_udp_filters_subtask(struct i40e_pf *pf)
{
#if IS_ENABLED(CONFIG_VXLAN) || IS_ENABLED(CONFIG_GENEVE)
struct i40e_hw *hw = &pf->hw;
i40e_status ret;
__be16 port;
......@@ -7092,7 +7079,6 @@ static void i40e_sync_udp_filters_subtask(struct i40e_pf *pf)
}
}
}
#endif
}
/**
......@@ -8628,7 +8614,6 @@ static int i40e_set_features(struct net_device *netdev,
return 0;
}
#if IS_ENABLED(CONFIG_VXLAN) || IS_ENABLED(CONFIG_GENEVE)
/**
* i40e_get_udp_port_idx - Lookup a possibly offloaded for Rx UDP port
* @pf: board private structure
......@@ -8648,21 +8633,18 @@ static u8 i40e_get_udp_port_idx(struct i40e_pf *pf, __be16 port)
return i;
}
#endif
#if IS_ENABLED(CONFIG_VXLAN)
/**
* i40e_add_vxlan_port - Get notifications about VXLAN ports that come up
* i40e_udp_tunnel_add - Get notifications about UDP tunnel ports that come up
* @netdev: This physical port's netdev
* @sa_family: Socket Family that VXLAN is notifying us about
* @port: New UDP port number that VXLAN started listening to
* @ti: Tunnel endpoint information
**/
static void i40e_add_vxlan_port(struct net_device *netdev,
sa_family_t sa_family, __be16 port)
static void i40e_udp_tunnel_add(struct net_device *netdev,
struct udp_tunnel_info *ti)
{
struct i40e_netdev_priv *np = netdev_priv(netdev);
struct i40e_vsi *vsi = np->vsi;
struct i40e_pf *pf = vsi->back;
__be16 port = ti->port;
u8 next_idx;
u8 idx;
......@@ -8670,7 +8652,7 @@ static void i40e_add_vxlan_port(struct net_device *netdev,
/* Check if port already exists */
if (idx < I40E_MAX_PF_UDP_OFFLOAD_PORTS) {
netdev_info(netdev, "vxlan port %d already offloaded\n",
netdev_info(netdev, "port %d already offloaded\n",
ntohs(port));
return;
}
......@@ -8679,131 +8661,75 @@ static void i40e_add_vxlan_port(struct net_device *netdev,
next_idx = i40e_get_udp_port_idx(pf, 0);
if (next_idx == I40E_MAX_PF_UDP_OFFLOAD_PORTS) {
netdev_info(netdev, "maximum number of vxlan UDP ports reached, not adding port %d\n",
ntohs(port));
return;
}
/* New port: add it and mark its index in the bitmap */
pf->udp_ports[next_idx].index = port;
pf->udp_ports[next_idx].type = I40E_AQC_TUNNEL_TYPE_VXLAN;
pf->pending_udp_bitmap |= BIT_ULL(next_idx);
pf->flags |= I40E_FLAG_UDP_FILTER_SYNC;
}
/**
* i40e_del_vxlan_port - Get notifications about VXLAN ports that go away
* @netdev: This physical port's netdev
* @sa_family: Socket Family that VXLAN is notifying us about
* @port: UDP port number that VXLAN stopped listening to
**/
static void i40e_del_vxlan_port(struct net_device *netdev,
sa_family_t sa_family, __be16 port)
{
struct i40e_netdev_priv *np = netdev_priv(netdev);
struct i40e_vsi *vsi = np->vsi;
struct i40e_pf *pf = vsi->back;
u8 idx;
idx = i40e_get_udp_port_idx(pf, port);
/* Check if port already exists */
if (idx < I40E_MAX_PF_UDP_OFFLOAD_PORTS) {
/* if port exists, set it to 0 (mark for deletion)
* and make it pending
*/
pf->udp_ports[idx].index = 0;
pf->pending_udp_bitmap |= BIT_ULL(idx);
pf->flags |= I40E_FLAG_UDP_FILTER_SYNC;
} else {
netdev_warn(netdev, "vxlan port %d was not found, not deleting\n",
ntohs(port));
}
}
#endif
#if IS_ENABLED(CONFIG_GENEVE)
/**
* i40e_add_geneve_port - Get notifications about GENEVE ports that come up
* @netdev: This physical port's netdev
* @sa_family: Socket Family that GENEVE is notifying us about
* @port: New UDP port number that GENEVE started listening to
**/
static void i40e_add_geneve_port(struct net_device *netdev,
sa_family_t sa_family, __be16 port)
{
struct i40e_netdev_priv *np = netdev_priv(netdev);
struct i40e_vsi *vsi = np->vsi;
struct i40e_pf *pf = vsi->back;
u8 next_idx;
u8 idx;
if (!(pf->flags & I40E_FLAG_GENEVE_OFFLOAD_CAPABLE))
return;
idx = i40e_get_udp_port_idx(pf, port);
/* Check if port already exists */
if (idx < I40E_MAX_PF_UDP_OFFLOAD_PORTS) {
netdev_info(netdev, "udp port %d already offloaded\n",
netdev_info(netdev, "maximum number of offloaded UDP ports reached, not adding port %d\n",
ntohs(port));
return;
}
/* Now check if there is space to add the new port */
next_idx = i40e_get_udp_port_idx(pf, 0);
if (next_idx == I40E_MAX_PF_UDP_OFFLOAD_PORTS) {
netdev_info(netdev, "maximum number of UDP ports reached, not adding port %d\n",
ntohs(port));
switch (ti->type) {
case UDP_TUNNEL_TYPE_VXLAN:
pf->udp_ports[next_idx].type = I40E_AQC_TUNNEL_TYPE_VXLAN;
break;
case UDP_TUNNEL_TYPE_GENEVE:
if (!(pf->flags & I40E_FLAG_GENEVE_OFFLOAD_CAPABLE))
return;
pf->udp_ports[next_idx].type = I40E_AQC_TUNNEL_TYPE_NGE;
break;
default:
return;
}
/* New port: add it and mark its index in the bitmap */
pf->udp_ports[next_idx].index = port;
pf->udp_ports[next_idx].type = I40E_AQC_TUNNEL_TYPE_NGE;
pf->pending_udp_bitmap |= BIT_ULL(next_idx);
pf->flags |= I40E_FLAG_UDP_FILTER_SYNC;
dev_info(&pf->pdev->dev, "adding geneve port %d\n", ntohs(port));
}
/**
* i40e_del_geneve_port - Get notifications about GENEVE ports that go away
* i40e_udp_tunnel_del - Get notifications about UDP tunnel ports that go away
* @netdev: This physical port's netdev
* @sa_family: Socket Family that GENEVE is notifying us about
* @port: UDP port number that GENEVE stopped listening to
* @ti: Tunnel endpoint information
**/
static void i40e_del_geneve_port(struct net_device *netdev,
sa_family_t sa_family, __be16 port)
static void i40e_udp_tunnel_del(struct net_device *netdev,
struct udp_tunnel_info *ti)
{
struct i40e_netdev_priv *np = netdev_priv(netdev);
struct i40e_vsi *vsi = np->vsi;
struct i40e_pf *pf = vsi->back;
__be16 port = ti->port;
u8 idx;
if (!(pf->flags & I40E_FLAG_GENEVE_OFFLOAD_CAPABLE))
return;
idx = i40e_get_udp_port_idx(pf, port);
/* Check if port already exists */
if (idx < I40E_MAX_PF_UDP_OFFLOAD_PORTS) {
/* if port exists, set it to 0 (mark for deletion)
* and make it pending
*/
pf->udp_ports[idx].index = 0;
pf->pending_udp_bitmap |= BIT_ULL(idx);
pf->flags |= I40E_FLAG_UDP_FILTER_SYNC;
if (idx >= I40E_MAX_PF_UDP_OFFLOAD_PORTS)
goto not_found;
dev_info(&pf->pdev->dev, "deleting geneve port %d\n",
ntohs(port));
} else {
netdev_warn(netdev, "geneve port %d was not found, not deleting\n",
ntohs(port));
switch (ti->type) {
case UDP_TUNNEL_TYPE_VXLAN:
if (pf->udp_ports[idx].type != I40E_AQC_TUNNEL_TYPE_VXLAN)
goto not_found;
break;
case UDP_TUNNEL_TYPE_GENEVE:
if (pf->udp_ports[idx].type != I40E_AQC_TUNNEL_TYPE_NGE)
goto not_found;
break;
default:
goto not_found;
}
/* if port exists, set it to 0 (mark for deletion)
* and make it pending
*/
pf->udp_ports[idx].index = 0;
pf->pending_udp_bitmap |= BIT_ULL(idx);
pf->flags |= I40E_FLAG_UDP_FILTER_SYNC;
return;
not_found:
netdev_warn(netdev, "UDP port %d was not found, not deleting\n",
ntohs(port));
}
#endif
static int i40e_get_phys_port_id(struct net_device *netdev,
struct netdev_phys_item_id *ppid)
......@@ -9033,14 +8959,8 @@ static const struct net_device_ops i40e_netdev_ops = {
.ndo_set_vf_link_state = i40e_ndo_set_vf_link_state,
.ndo_set_vf_spoofchk = i40e_ndo_set_vf_spoofchk,
.ndo_set_vf_trust = i40e_ndo_set_vf_trust,
#if IS_ENABLED(CONFIG_VXLAN)
.ndo_add_vxlan_port = i40e_add_vxlan_port,
.ndo_del_vxlan_port = i40e_del_vxlan_port,
#endif
#if IS_ENABLED(CONFIG_GENEVE)
.ndo_add_geneve_port = i40e_add_geneve_port,
.ndo_del_geneve_port = i40e_del_geneve_port,
#endif
.ndo_udp_tunnel_add = i40e_udp_tunnel_add,
.ndo_udp_tunnel_del = i40e_udp_tunnel_del,
.ndo_get_phys_port_id = i40e_get_phys_port_id,
.ndo_fdb_add = i40e_ndo_fdb_add,
.ndo_features_check = i40e_features_check,
......@@ -10689,12 +10609,8 @@ static void i40e_print_features(struct i40e_pf *pf)
}
if (pf->flags & I40E_FLAG_DCB_CAPABLE)
i += snprintf(&buf[i], REMAIN(i), " DCB");
#if IS_ENABLED(CONFIG_VXLAN)
i += snprintf(&buf[i], REMAIN(i), " VxLAN");
#endif
#if IS_ENABLED(CONFIG_GENEVE)
i += snprintf(&buf[i], REMAIN(i), " Geneve");
#endif
if (pf->flags & I40E_FLAG_PTP)
i += snprintf(&buf[i], REMAIN(i), " PTP");
#ifdef I40E_FCOE
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment