Skip to content

L
linux
Commit 07834925 authored by Linus Torvalds's avatar Linus Torvalds
Browse files
Options

Merge bk://bk.arm.linux.org.uk 

into penguin.transmeta.com:/home/penguin/torvalds/repositories/kernel/linux
parents 71479bdc 0d5e4e13
Show whitespace changes
Inline Side-by-side
Showing with 7700 additions and 10 deletions
arch/arm/Makefile
View file @ 07834925
......@@ -8,6 +8,7 @@
# Copyright (C) 1995-2001 by Russell King
LDFLAGS_vmlinux :=-p -X
LDFLAGS_BLOB :=--format binary
AFLAGS_vmlinux.lds.o = -DTEXTADDR=$(TEXTADDR) -DDATAADDR=$(DATAADDR)
OBJCOPYFLAGS :=-O binary -R .note -R .comment -S
GZFLAGS :=-9
......@@ -60,6 +61,7 @@ AFLAGS +=$(apcs-y) $(arch-y) -mno-fpu -msoft-float -Wa,-mno-fpu
ifeq ($(CONFIG_CPU_26),y)
PROCESSOR := armo
HEAD := arch/arm/mach-arc/head.o arch/arm/kernel/init_task.o
LDFLAGS_BLOB += --oformat elf26-littlearm
ifeq ($(CONFIG_ROM_KERNEL),y)
DATAADDR = 0x02080000
TEXTADDR = 0x03800000
......@@ -72,6 +74,7 @@ ifeq ($(CONFIG_CPU_32),y)
PROCESSOR = armv
HEAD := arch/arm/kernel/head.o arch/arm/kernel/init_task.o
TEXTADDR = 0xC0008000
LDFLAGS_BLOB += --oformat elf32-littlearm
endif
ifeq ($(CONFIG_ARCH_ARCA5K),y)
......
arch/arm/kernel/process.c
View file @ 07834925
......@@ -391,12 +391,12 @@ void dump_thread(struct pt_regs * regs, struct user * dump)
*/
pid_t kernel_thread(int (*fn)(void *), void *arg, unsigned long flags)
{
pid_t __ret;
register unsigned int r0 asm("r0") = flags | CLONE_VM | CLONE_UNTRACED;
register unsigned int r1 asm("r1") = 0;
register pid_t __ret asm("r0");
__asm__ __volatile__(
"orr r0, %1, %2 @ kernel_thread sys_clone \n\
mov r1, #0 \n\
"__syscall(clone)" \n\
__syscall(clone)" @ kernel_thread sys_clone \n\
movs %0, r0 @ if we are the child \n\
bne 1f \n\
mov fp, #0 @ ensure that fp is zero \n\
......@@ -406,8 +406,8 @@ pid_t kernel_thread(int (*fn)(void *), void *arg, unsigned long flags)
b sys_exit \n\
1: "
: "=r" (__ret)
: "Ir" (flags), "r" (CLONE_VM | CLONE_UNTRACED), "r" (fn), "r" (arg)
: "r0", "r1", "lr");
: "0" (r0), "r" (r1), "r" (fn), "r" (arg)
: "lr");
return __ret;
}
......
arch/arm/vmlinux-armv.lds.in
View file @ 07834925
......@@ -37,7 +37,7 @@ SECTIONS
__initcall_end = .;
. = ALIGN(32);
__initramfs_start = .;
*(.init.initramfs)
usr/built-in.o(.init.ramfs)
__initramfs_end = .;
. = ALIGN(4096);
__init_end = .;
......
drivers/acorn/scsi/arxescsi.c
View file @ 07834925
......@@ -35,6 +35,7 @@
#include <asm/irq.h>
#include <asm/ecard.h>
#include "../../scsi/scsi.h"
#include "../../scsi/hosts.h"
#include "arxescsi.h"
#include "fas216.h"
......
drivers/acorn/scsi/cumana_2.c
View file @ 07834925
......@@ -35,6 +35,7 @@
#include <asm/irq.h>
#include <asm/pgtable.h>
#include "../../scsi/scsi.h"
#include "../../scsi/hosts.h"
#include "fas216.h"
#include "scsi.h"
......
drivers/acorn/scsi/eesox.c
View file @ 07834925
......@@ -41,6 +41,7 @@
#include <asm/ecard.h>
#include <asm/pgtable.h>
#include "../../scsi/scsi.h"
#include "../../scsi/hosts.h"
#include "fas216.h"
#include "scsi.h"
......
drivers/acorn/scsi/powertec.c
View file @ 07834925
......@@ -38,6 +38,7 @@
#include <asm/irq.h>
#include <asm/pgtable.h>
#include "../../scsi/scsi.h"
#include "../../scsi/hosts.h"
#include "fas216.h"
#include "scsi.h"
......
drivers/serial/68328serial.c 0 → 100644
View file @ 07834925
/* 68328serial.c: Serial port driver for 68328 microcontroller
*
* Copyright (C) 1995 David S. Miller <davem@caip.rutgers.edu>
* Copyright (C) 1998 Kenneth Albanowski <kjahds@kjahds.com>
* Copyright (C) 1998, 1999 D. Jeff Dionne <jeff@uclinux.org>
* Copyright (C) 1999 Vladimir Gurevich <vgurevic@cisco.com>
* Copyright (C) 2002 David McCullough <davidm@snapgear.com>
* Copyright (C) 2002 Greg Ungerer <gerg@snapgear.com>
*
* VZ Support/Fixes Evan Stawnyczy <e@lineo.ca>
* Multiple UART support Daniel Potts <danielp@cse.unsw.edu.au>
* Power management support Daniel Potts <danielp@cse.unsw.edu.au>
* VZ Second Serial Port enable Phil Wilshire
* 2.4/2.5 port David McCullough
*/
#include <asm/dbg.h>
#include <linux/module.h>
#include <linux/errno.h>
#include <linux/signal.h>
#include <linux/sched.h>
#include <linux/timer.h>
#include <linux/interrupt.h>
#include <linux/tty.h>
#include <linux/tty_flip.h>
#include <linux/config.h>
#include <linux/major.h>
#include <linux/string.h>
#include <linux/fcntl.h>
#include <linux/mm.h>
#include <linux/kernel.h>
#include <linux/console.h>
#include <linux/reboot.h>
#include <linux/keyboard.h>
#include <linux/init.h>
#include <linux/pm.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/system.h>
#include <asm/segment.h>
#include <asm/bitops.h>
#include <asm/delay.h>
#include <asm/uaccess.h>
/* (es) */
/* note: perhaps we can murge these files, so that you can just
* define 1 of them, and they can sort that out for themselves
*/
#if defined(CONFIG_M68EZ328)
#include <asm/MC68EZ328.h>
#else
#if defined(CONFIG_M68VZ328)
#include <asm/MC68VZ328.h>
#else
#include <asm/MC68328.h>
#endif /* CONFIG_M68VZ328 */
#endif /* CONFIG_M68EZ328 */
#include "68328serial.h"
/* Turn off usage of real serial interrupt code, to "support" Copilot */
#ifdef CONFIG_XCOPILOT_BUGS
#undef USE_INTS
#else
#define USE_INTS
#endif
static struct m68k_serial m68k_soft[NR_PORTS];
struct m86k_serial *IRQ_ports[NR_IRQS];
static unsigned int uart_irqs[NR_PORTS] = UART_IRQ_DEFNS;
/* multiple ports are contiguous in memory */
m68328_uart *uart_addr = USTCNT_ADDR;
struct tty_struct m68k_ttys;
struct m68k_serial *m68k_consinfo = 0;
#define M68K_CLOCK (16667000) /* FIXME: 16MHz is likely wrong */
#ifdef CONFIG_CONSOLE
extern wait_queue_head_t keypress_wait;
#endif
struct tty_driver serial_driver, callout_driver;
static int serial_refcount;
/* serial subtype definitions */
#define SERIAL_TYPE_NORMAL 1
#define SERIAL_TYPE_CALLOUT 2
/* number of characters left in xmit buffer before we ask for more */
#define WAKEUP_CHARS 256
/* Debugging... DEBUG_INTR is bad to use when one of the zs
* lines is your console ;(
*/
#undef SERIAL_DEBUG_INTR
#undef SERIAL_DEBUG_OPEN
#undef SERIAL_DEBUG_FLOW
#define RS_ISR_PASS_LIMIT 256
#define _INLINE_ inline
static void change_speed(struct m68k_serial *info);
static struct tty_struct *serial_table[NR_PORTS];
static struct termios *serial_termios[NR_PORTS];
static struct termios *serial_termios_locked[NR_PORTS];
/*
* Setup for console. Argument comes from the boot command line.
*/
#if defined(CONFIG_M68EZ328ADS) || defined(CONFIG_ALMA_ANS) || defined(CONFIG_DRAGONIXVZ)
#define CONSOLE_BAUD_RATE 115200
#define DEFAULT_CBAUD B115200
#else
/* (es) */
/* note: this is messy, but it works, again, perhaps defined somewhere else?*/
#ifdef CONFIG_M68VZ328
#define CONSOLE_BAUD_RATE 19200
#define DEFAULT_CBAUD B19200
#endif
/* (/es) */
#endif
#ifndef CONSOLE_BAUD_RATE
#define CONSOLE_BAUD_RATE 9600
#define DEFAULT_CBAUD B9600
#endif
static int m68328_console_initted = 0;
static int m68328_console_baud = CONSOLE_BAUD_RATE;
static int m68328_console_cbaud = DEFAULT_CBAUD;
/*
* tmp_buf is used as a temporary buffer by serial_write. We need to
* lock it in case the memcpy_fromfs blocks while swapping in a page,
* and some other program tries to do a serial write at the same time.
* Since the lock will only come under contention when the system is
* swapping and available memory is low, it makes sense to share one
* buffer across all the serial ports, since it significantly saves
* memory if large numbers of serial ports are open.
*/
static unsigned char tmp_buf[SERIAL_XMIT_SIZE]; /* This is cheating */
DECLARE_MUTEX(tmp_buf_sem);
static inline int serial_paranoia_check(struct m68k_serial *info,
kdev_t device, const char *routine)
{
#ifdef SERIAL_PARANOIA_CHECK
static const char *badmagic =
"Warning: bad magic number for serial struct (%d, %d) in %s\n";
static const char *badinfo =
"Warning: null m68k_serial for (%d, %d) in %s\n";
if (!info) {
printk(badinfo, major(device), minor(device), routine);
return 1;
}
if (info->magic != SERIAL_MAGIC) {
printk(badmagic, major(device), minor(device), routine);
return 1;
}
#endif
return 0;
}
/*
* This is used to figure out the divisor speeds and the timeouts
*/
static int baud_table[] = {
0, 50, 75, 110, 134, 150, 200, 300, 600, 1200, 1800, 2400, 4800,
9600, 19200, 38400, 57600, 115200, 0 };
#define BAUD_TABLE_SIZE (sizeof(baud_table)/sizeof(baud_table[0]))
/* Sets or clears DTR/RTS on the requested line */
static inline void m68k_rtsdtr(struct m68k_serial *ss, int set)
{
if (set) {
/* set the RTS/CTS line */
} else {
/* clear it */
}
return;
}
/* Utility routines */
static inline int get_baud(struct m68k_serial *ss)
{
unsigned long result = 115200;
unsigned short int baud = uart_addr[ss->line].ubaud;
if (GET_FIELD(baud, UBAUD_PRESCALER) == 0x38) result = 38400;
result >>= GET_FIELD(baud, UBAUD_DIVIDE);
return result;
}
/*
* ------------------------------------------------------------
* rs_stop() and rs_start()
*
* This routines are called before setting or resetting tty->stopped.
* They enable or disable transmitter interrupts, as necessary.
* ------------------------------------------------------------
*/
static void rs_stop(struct tty_struct *tty)
{
struct m68k_serial *info = (struct m68k_serial *)tty->driver_data;
m68328_uart *uart = &uart_addr[info->line];
unsigned long flags;
if (serial_paranoia_check(info, tty->device, "rs_stop"))
return;
save_flags(flags); cli();
uart->ustcnt &= ~USTCNT_TXEN;
restore_flags(flags);
}
static void rs_put_char(char ch)
{
int flags, loops = 0;
save_flags(flags); cli();
while (!(UTX & UTX_TX_AVAIL) && (loops < 1000)) {
loops++;
udelay(5);
}
UTX_TXDATA = ch;
udelay(5);
restore_flags(flags);
}
static void rs_start(struct tty_struct *tty)
{
struct m68k_serial *info = (struct m68k_serial *)tty->driver_data;
m68328_uart *uart = &uart_addr[info->line];
unsigned long flags;
if (serial_paranoia_check(info, tty->device, "rs_start"))
return;
save_flags(flags); cli();
if (info->xmit_cnt && info->xmit_buf && !(uart->ustcnt & USTCNT_TXEN)) {
#ifdef USE_INTS
uart->ustcnt |= USTCNT_TXEN | USTCNT_TX_INTR_MASK;
#else
uart->ustcnt |= USTCNT_TXEN;
#endif
}
restore_flags(flags);
}
/* Drop into either the boot monitor or kadb upon receiving a break
* from keyboard/console input.
*/
static void batten_down_hatches(void)
{
/* Drop into the debugger */
}
static _INLINE_ void status_handle(struct m68k_serial *info, unsigned short status)
{
#if 0
if(status & DCD) {
if((info->tty->termios->c_cflag & CRTSCTS) &&
((info->curregs[3] & AUTO_ENAB)==0)) {
info->curregs[3] |= AUTO_ENAB;
info->pendregs[3] |= AUTO_ENAB;
write_zsreg(info->m68k_channel, 3, info->curregs[3]);
}
} else {
if((info->curregs[3] & AUTO_ENAB)) {
info->curregs[3] &= ~AUTO_ENAB;
info->pendregs[3] &= ~AUTO_ENAB;
write_zsreg(info->m68k_channel, 3, info->curregs[3]);
}
}
#endif
/* If this is console input and this is a
* 'break asserted' status change interrupt
* see if we can drop into the debugger
*/
if((status & URX_BREAK) && info->break_abort)
batten_down_hatches();
return;
}
static _INLINE_ void receive_chars(struct m68k_serial *info, struct pt_regs *regs, unsigned short rx)
{
struct tty_struct *tty = info->tty;
m68328_uart *uart = &uart_addr[info->line];
unsigned char ch;
/*
* This do { } while() loop will get ALL chars out of Rx FIFO
*/
#ifndef CONFIG_XCOPILOT_BUGS
do {
#endif
ch = GET_FIELD(rx, URX_RXDATA);
if(info->is_cons) {
if(URX_BREAK & rx) { /* whee, break received */
status_handle(info, rx);
return;
#ifdef CONFIG_MAGIC_SYSRQ
} else if (ch == 0x10) { /* ^P */
show_state();
show_free_areas();
show_buffers();
/* show_net_buffers(); */
return;
} else if (ch == 0x12) { /* ^R */
machine_restart(NULL);
return;
#endif /* CONFIG_MAGIC_SYSRQ */
}
/* It is a 'keyboard interrupt' ;-) */
#ifdef CONFIG_CONSOLE
wake_up(&keypress_wait);
#endif
}
if(!tty)
goto clear_and_exit;
/*
* Make sure that we do not overflow the buffer
*/
if (tty->flip.count >= TTY_FLIPBUF_SIZE) {
schedule_work(&tty->flip.work);
return;
}
if(rx & URX_PARITY_ERROR) {
*tty->flip.flag_buf_ptr++ = TTY_PARITY;
status_handle(info, rx);
} else if(rx & URX_OVRUN) {
*tty->flip.flag_buf_ptr++ = TTY_OVERRUN;
status_handle(info, rx);
} else if(rx & URX_FRAME_ERROR) {
*tty->flip.flag_buf_ptr++ = TTY_FRAME;
status_handle(info, rx);
} else {
*tty->flip.flag_buf_ptr++ = 0; /* XXX */
}
*tty->flip.char_buf_ptr++ = ch;
tty->flip.count++;
#ifndef CONFIG_XCOPILOT_BUGS
} while((rx = uart->urx.w) & URX_DATA_READY);
#endif
schedule_work(&tty->flip.work);
clear_and_exit:
return;
}
static _INLINE_ void transmit_chars(struct m68k_serial *info)
{
m68328_uart *uart = &uart_addr[info->line];
if (info->x_char) {
/* Send next char */
uart->utx.b.txdata = info->x_char;
info->x_char = 0;
goto clear_and_return;
}
if((info->xmit_cnt <= 0) || info->tty->stopped) {
/* That's peculiar... TX ints off */
uart->ustcnt &= ~USTCNT_TX_INTR_MASK;
goto clear_and_return;
}
/* Send char */
uart->utx.b.txdata = info->xmit_buf[info->xmit_tail++];
info->xmit_tail = info->xmit_tail & (SERIAL_XMIT_SIZE-1);
info->xmit_cnt--;
if (info->xmit_cnt < WAKEUP_CHARS)
schedule_work(&info->tqueue);
if(info->xmit_cnt <= 0) {
/* All done for now... TX ints off */
uart->ustcnt &= ~USTCNT_TX_INTR_MASK;
goto clear_and_return;
}
clear_and_return:
/* Clear interrupt (should be auto)*/
return;
}
/*
* This is the serial driver's generic interrupt routine
*/
void rs_interrupt(int irq, void *dev_id, struct pt_regs * regs)
{
struct m68k_serial * info;
m68328_uart *uart;
unsigned short rx;
unsigned short tx;
info = IRQ_ports[irq];
if(!info)
return;
uart = &uart_addr[info->line];
rx = uart->urx.w;
#ifdef USE_INTS
tx = uart->utx.w;
if (rx & URX_DATA_READY) receive_chars(info, regs, rx);
if (tx & UTX_TX_AVAIL) transmit_chars(info);
#else
receive_chars(info, regs, rx);
#endif
return;
}
static void do_softint(void *private)
{
struct m68k_serial *info = (struct m68k_serial *) private;
struct tty_struct *tty;
tty = info->tty;
if (!tty)
return;
#if 0
if (clear_bit(RS_EVENT_WRITE_WAKEUP, &info->event)) {
if ((tty->flags & (1 << TTY_DO_WRITE_WAKEUP)) &&
tty->ldisc.write_wakeup)
(tty->ldisc.write_wakeup)(tty);
wake_up_interruptible(&tty->write_wait);
}
#endif
}
/*
* This routine is called from the scheduler tqueue when the interrupt
* routine has signalled that a hangup has occurred. The path of
* hangup processing is:
*
* serial interrupt routine -> (scheduler tqueue) ->
* do_serial_hangup() -> tty->hangup() -> rs_hangup()
*
*/
static void do_serial_hangup(void *private)
{
struct m68k_serial *info = (struct m68k_serial *) private;
struct tty_struct *tty;
tty = info->tty;
if (!tty)
return;
tty_hangup(tty);
}
static int startup(struct m68k_serial * info)
{
m68328_uart *uart = &uart_addr[info->line];
unsigned long flags;
if (info->flags & S_INITIALIZED)
return 0;
if (!info->xmit_buf) {
info->xmit_buf = (unsigned char *) __get_free_page(GFP_KERNEL);
if (!info->xmit_buf)
return -ENOMEM;
}
save_flags(flags); cli();
/*
* Clear the FIFO buffers and disable them
* (they will be reenabled in change_speed())
*/
uart->ustcnt = USTCNT_UEN;
info->xmit_fifo_size = 1;
uart->ustcnt = USTCNT_UEN | USTCNT_RXEN | USTCNT_TXEN;
(void)uart->urx.w;
/*
* Finally, enable sequencing and interrupts
*/
#ifdef USE_INTS
uart->ustcnt = USTCNT_UEN | USTCNT_RXEN |
USTCNT_RX_INTR_MASK | USTCNT_TX_INTR_MASK;
#else
uart->ustcnt = USTCNT_UEN | USTCNT_RXEN | USTCNT_RX_INTR_MASK;
#endif
if (info->tty)
clear_bit(TTY_IO_ERROR, &info->tty->flags);
info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
/*
* and set the speed of the serial port
*/
change_speed(info);
info->flags |= S_INITIALIZED;
restore_flags(flags);
return 0;
}
/*
* This routine will shutdown a serial port; interrupts are disabled, and
* DTR is dropped if the hangup on close termio flag is on.
*/
static void shutdown(struct m68k_serial * info)
{
m68328_uart *uart = &uart_addr[info->line];
unsigned long flags;
uart->ustcnt = 0; /* All off! */
if (!(info->flags & S_INITIALIZED))
return;
save_flags(flags); cli(); /* Disable interrupts */
if (info->xmit_buf) {
free_page((unsigned long) info->xmit_buf);
info->xmit_buf = 0;
}
if (info->tty)
set_bit(TTY_IO_ERROR, &info->tty->flags);
info->flags &= ~S_INITIALIZED;
restore_flags(flags);
}
struct {
int divisor, prescale;
}
#ifndef CONFIG_M68VZ328
hw_baud_table[18] = {
{0,0}, /* 0 */
{0,0}, /* 50 */
{0,0}, /* 75 */
{0,0}, /* 110 */
{0,0}, /* 134 */
{0,0}, /* 150 */
{0,0}, /* 200 */
{7,0x26}, /* 300 */
{6,0x26}, /* 600 */
{5,0x26}, /* 1200 */
{0,0}, /* 1800 */
{4,0x26}, /* 2400 */
{3,0x26}, /* 4800 */
{2,0x26}, /* 9600 */
{1,0x26}, /* 19200 */
{0,0x26}, /* 38400 */
{1,0x38}, /* 57600 */
{0,0x38}, /* 115200 */
};
#else
hw_baud_table[18] = {
{0,0}, /* 0 */
{0,0}, /* 50 */
{0,0}, /* 75 */
{0,0}, /* 110 */
{0,0}, /* 134 */
{0,0}, /* 150 */
{0,0}, /* 200 */
{0,0}, /* 300 */
{7,0x26}, /* 600 */
{6,0x26}, /* 1200 */
{0,0}, /* 1800 */
{5,0x26}, /* 2400 */
{4,0x26}, /* 4800 */
{3,0x26}, /* 9600 */
{2,0x26}, /* 19200 */
{1,0x26}, /* 38400 */
{0,0x26}, /* 57600 */
{1,0x38}, /* 115200 */
};
#endif
/* rate = 1036800 / ((65 - prescale) * (1<<divider)) */
/*
* This routine is called to set the UART divisor registers to match
* the specified baud rate for a serial port.
*/
static void change_speed(struct m68k_serial *info)
{
m68328_uart *uart = &uart_addr[info->line];
unsigned short port;
unsigned short ustcnt;
unsigned cflag;
int i;
if (!info->tty || !info->tty->termios)
return;
cflag = info->tty->termios->c_cflag;
if (!(port = info->port))
return;
ustcnt = uart->ustcnt;
uart->ustcnt = ustcnt & ~USTCNT_TXEN;
i = cflag & CBAUD;
if (i & CBAUDEX) {
i = (i & ~CBAUDEX) + B38400;
}
info->baud = baud_table[i];
uart->ubaud = PUT_FIELD(UBAUD_DIVIDE, hw_baud_table[i].divisor) |
PUT_FIELD(UBAUD_PRESCALER, hw_baud_table[i].prescale);
ustcnt &= ~(USTCNT_PARITYEN | USTCNT_ODD_EVEN | USTCNT_STOP | USTCNT_8_7);
if ((cflag & CSIZE) == CS8)
ustcnt |= USTCNT_8_7;
if (cflag & CSTOPB)
ustcnt |= USTCNT_STOP;
if (cflag & PARENB)
ustcnt |= USTCNT_PARITYEN;
if (cflag & PARODD)
ustcnt |= USTCNT_ODD_EVEN;
#ifdef CONFIG_SERIAL_68328_RTS_CTS
if (cflag & CRTSCTS) {
uart->utx.w &= ~ UTX_NOCTS;
} else {
uart->utx.w |= UTX_NOCTS;
}
#endif
ustcnt |= USTCNT_TXEN;
uart->ustcnt = ustcnt;
return;
}
/*
* Fair output driver allows a process to speak.
*/
static void rs_fair_output(void)
{
int left; /* Output no more than that */
unsigned long flags;
struct m68k_serial *info = &m68k_soft[0];
char c;
if (info == 0) return;
if (info->xmit_buf == 0) return;
save_flags(flags); cli();
left = info->xmit_cnt;
while (left != 0) {
c = info->xmit_buf[info->xmit_tail];
info->xmit_tail = (info->xmit_tail+1) & (SERIAL_XMIT_SIZE-1);
info->xmit_cnt--;
restore_flags(flags);
rs_put_char(c);
save_flags(flags); cli();
left = min(info->xmit_cnt, left-1);
}
/* Last character is being transmitted now (hopefully). */
udelay(5);
restore_flags(flags);
return;
}
/*
* m68k_console_print is registered for printk.
*/
void console_print_68328(const char *p)
{
char c;
while((c=*(p++)) != 0) {
if(c == '\n')
rs_put_char('\r');
rs_put_char(c);
}
/* Comment this if you want to have a strict interrupt-driven output */
rs_fair_output();
return;
}
static void rs_set_ldisc(struct tty_struct *tty)
{
struct m68k_serial *info = (struct m68k_serial *)tty->driver_data;
if (serial_paranoia_check(info, tty->device, "rs_set_ldisc"))
return;
info->is_cons = (tty->termios->c_line == N_TTY);
printk("ttyS%d console mode %s\n", info->line, info->is_cons ? "on" : "off");
}
static void rs_flush_chars(struct tty_struct *tty)
{
struct m68k_serial *info = (struct m68k_serial *)tty->driver_data;
m68328_uart *uart = &uart_addr[info->line];
unsigned long flags;
if (serial_paranoia_check(info, tty->device, "rs_flush_chars"))
return;
#ifndef USE_INTS
for(;;) {
#endif
/* Enable transmitter */
save_flags(flags); cli();
if (info->xmit_cnt <= 0 || tty->stopped || tty->hw_stopped ||
!info->xmit_buf) {
restore_flags(flags);
return;
}
#ifdef USE_INTS
uart->ustcnt |= USTCNT_TXEN | USTCNT_TX_INTR_MASK;
#else
uart->ustcnt |= USTCNT_TXEN;
#endif
#ifdef USE_INTS
if (uart->utx.w & UTX_TX_AVAIL) {
#else
if (1) {
#endif
/* Send char */
uart->utx.b.txdata = info->xmit_buf[info->xmit_tail++];
info->xmit_tail = info->xmit_tail & (SERIAL_XMIT_SIZE-1);
info->xmit_cnt--;
}
#ifndef USE_INTS
while (!(uart->utx.w & UTX_TX_AVAIL)) udelay(5);
}
#endif
restore_flags(flags);
}
extern void console_printn(const char * b, int count);
static int rs_write(struct tty_struct * tty, int from_user,
const unsigned char *buf, int count)
{
int c, total = 0;
struct m68k_serial *info = (struct m68k_serial *)tty->driver_data;
m68328_uart *uart = &uart_addr[info->line];
unsigned long flags;
if (serial_paranoia_check(info, tty->device, "rs_write"))
return 0;
if (!tty || !info->xmit_buf)
return 0;
save_flags(flags);
while (1) {
cli();
c = min(count, min(SERIAL_XMIT_SIZE - info->xmit_cnt - 1,
SERIAL_XMIT_SIZE - info->xmit_head));
if (c <= 0)
break;
if (from_user) {
down(&tmp_buf_sem);
copy_from_user(tmp_buf, buf, c);
c = min(c, min(SERIAL_XMIT_SIZE - info->xmit_cnt - 1,
SERIAL_XMIT_SIZE - info->xmit_head));
memcpy(info->xmit_buf + info->xmit_head, tmp_buf, c);
up(&tmp_buf_sem);
} else
memcpy(info->xmit_buf + info->xmit_head, buf, c);
info->xmit_head = (info->xmit_head + c) & (SERIAL_XMIT_SIZE-1);
info->xmit_cnt += c;
restore_flags(flags);
buf += c;
count -= c;
total += c;
}
if (info->xmit_cnt && !tty->stopped && !tty->hw_stopped) {
/* Enable transmitter */
cli();
#ifndef USE_INTS
while(info->xmit_cnt) {
#endif
uart->ustcnt |= USTCNT_TXEN;
#ifdef USE_INTS
uart->ustcnt |= USTCNT_TX_INTR_MASK;
#else
while (!(uart->utx.w & UTX_TX_AVAIL)) udelay(5);
#endif
if (uart->utx.w & UTX_TX_AVAIL) {
uart->utx.b.txdata = info->xmit_buf[info->xmit_tail++];
info->xmit_tail = info->xmit_tail & (SERIAL_XMIT_SIZE-1);
info->xmit_cnt--;
}
#ifndef USE_INTS
}
#endif
restore_flags(flags);
}
restore_flags(flags);
return total;
}
static int rs_write_room(struct tty_struct *tty)
{
struct m68k_serial *info = (struct m68k_serial *)tty->driver_data;
int ret;
if (serial_paranoia_check(info, tty->device, "rs_write_room"))
return 0;
ret = SERIAL_XMIT_SIZE - info->xmit_cnt - 1;
if (ret < 0)
ret = 0;
return ret;
}
static int rs_chars_in_buffer(struct tty_struct *tty)
{
struct m68k_serial *info = (struct m68k_serial *)tty->driver_data;
if (serial_paranoia_check(info, tty->device, "rs_chars_in_buffer"))
return 0;
return info->xmit_cnt;
}
static void rs_flush_buffer(struct tty_struct *tty)
{
struct m68k_serial *info = (struct m68k_serial *)tty->driver_data;
if (serial_paranoia_check(info, tty->device, "rs_flush_buffer"))
return;
cli();
info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
sti();
wake_up_interruptible(&tty->write_wait);
if ((tty->flags & (1 << TTY_DO_WRITE_WAKEUP)) &&
tty->ldisc.write_wakeup)
(tty->ldisc.write_wakeup)(tty);
}
/*
* ------------------------------------------------------------
* rs_throttle()
*
* This routine is called by the upper-layer tty layer to signal that
* incoming characters should be throttled.
* ------------------------------------------------------------
*/
static void rs_throttle(struct tty_struct * tty)
{
struct m68k_serial *info = (struct m68k_serial *)tty->driver_data;
if (serial_paranoia_check(info, tty->device, "rs_throttle"))
return;
if (I_IXOFF(tty))
info->x_char = STOP_CHAR(tty);
/* Turn off RTS line (do this atomic) */
}
static void rs_unthrottle(struct tty_struct * tty)
{
struct m68k_serial *info = (struct m68k_serial *)tty->driver_data;
if (serial_paranoia_check(info, tty->device, "rs_unthrottle"))
return;
if (I_IXOFF(tty)) {
if (info->x_char)
info->x_char = 0;
else
info->x_char = START_CHAR(tty);
}
/* Assert RTS line (do this atomic) */
}
/*
* ------------------------------------------------------------
* rs_ioctl() and friends
* ------------------------------------------------------------
*/
static int get_serial_info(struct m68k_serial * info,
struct serial_struct * retinfo)
{
struct serial_struct tmp;
if (!retinfo)
return -EFAULT;
memset(&tmp, 0, sizeof(tmp));
tmp.type = info->type;
tmp.line = info->line;
tmp.port = info->port;
tmp.irq = info->irq;
tmp.flags = info->flags;
tmp.baud_base = info->baud_base;
tmp.close_delay = info->close_delay;
tmp.closing_wait = info->closing_wait;
tmp.custom_divisor = info->custom_divisor;
copy_to_user(retinfo,&tmp,sizeof(*retinfo));
return 0;
}
static int set_serial_info(struct m68k_serial * info,
struct serial_struct * new_info)
{
struct serial_struct new_serial;
struct m68k_serial old_info;
int retval = 0;
if (!new_info)
return -EFAULT;
copy_from_user(&new_serial,new_info,sizeof(new_serial));
old_info = *info;
if (!capable(CAP_SYS_ADMIN)) {
if ((new_serial.baud_base != info->baud_base) ||
(new_serial.type != info->type) ||
(new_serial.close_delay != info->close_delay) ||
((new_serial.flags & ~S_USR_MASK) !=
(info->flags & ~S_USR_MASK)))
return -EPERM;
info->flags = ((info->flags & ~S_USR_MASK) |
(new_serial.flags & S_USR_MASK));
info->custom_divisor = new_serial.custom_divisor;
goto check_and_exit;
}
if (info->count > 1)
return -EBUSY;
/*
* OK, past this point, all the error checking has been done.
* At this point, we start making changes.....
*/
info->baud_base = new_serial.baud_base;
info->flags = ((info->flags & ~S_FLAGS) |
(new_serial.flags & S_FLAGS));
info->type = new_serial.type;
info->close_delay = new_serial.close_delay;
info->closing_wait = new_serial.closing_wait;
check_and_exit:
retval = startup(info);
return retval;
}
/*
* get_lsr_info - get line status register info
*
* Purpose: Let user call ioctl() to get info when the UART physically
* is emptied. On bus types like RS485, the transmitter must
* release the bus after transmitting. This must be done when
* the transmit shift register is empty, not be done when the
* transmit holding register is empty. This functionality
* allows an RS485 driver to be written in user space.
*/
static int get_lsr_info(struct m68k_serial * info, unsigned int *value)
{
#ifdef CONFIG_SERIAL_68328_RTS_CTS
m68328_uart *uart = &uart_addr[info->line];
#endif
unsigned char status;
cli();
#ifdef CONFIG_SERIAL_68328_RTS_CTS
status = (uart->utx.w & UTX_CTS_STAT) ? 1 : 0;
#else
status = 0;
#endif
sti();
put_user(status,value);
return 0;
}
/*
* This routine sends a break character out the serial port.
*/
static void send_break( struct m68k_serial * info, int duration)
{
m68328_uart *uart = &uart_addr[info->line];
unsigned long flags;
if (!info->port)
return;
current->state = TASK_INTERRUPTIBLE;
save_flags(flags);
cli();
#ifdef USE_INTS
uart->utx.w |= UTX_SEND_BREAK;
schedule_timeout(duration);
uart->utx.w &= ~UTX_SEND_BREAK;
#endif
restore_flags(flags);
}
static int rs_ioctl(struct tty_struct *tty, struct file * file,
unsigned int cmd, unsigned long arg)
{
int error;
struct m68k_serial * info = (struct m68k_serial *)tty->driver_data;
int retval;
if (serial_paranoia_check(info, tty->device, "rs_ioctl"))
return -ENODEV;
if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) &&
(cmd != TIOCSERCONFIG) && (cmd != TIOCSERGWILD) &&
(cmd != TIOCSERSWILD) && (cmd != TIOCSERGSTRUCT)) {
if (tty->flags & (1 << TTY_IO_ERROR))
return -EIO;
}
switch (cmd) {
case TCSBRK: /* SVID version: non-zero arg --> no break */
retval = tty_check_change(tty);
if (retval)
return retval;
tty_wait_until_sent(tty, 0);
if (!arg)
send_break(info, HZ/4); /* 1/4 second */
return 0;
case TCSBRKP: /* support for POSIX tcsendbreak() */
retval = tty_check_change(tty);
if (retval)
return retval;
tty_wait_until_sent(tty, 0);
send_break(info, arg ? arg*(HZ/10) : HZ/4);
return 0;
case TIOCGSOFTCAR:
error = verify_area(VERIFY_WRITE, (void *) arg,sizeof(long));
if (error)
return error;
put_user(C_CLOCAL(tty) ? 1 : 0,
(unsigned long *) arg);
return 0;
case TIOCSSOFTCAR:
get_user(arg, (unsigned long *) arg);
tty->termios->c_cflag =
((tty->termios->c_cflag & ~CLOCAL) |
(arg ? CLOCAL : 0));
return 0;
case TIOCGSERIAL:
error = verify_area(VERIFY_WRITE, (void *) arg,
sizeof(struct serial_struct));
if (error)
return error;
return get_serial_info(info,
(struct serial_struct *) arg);
case TIOCSSERIAL:
return set_serial_info(info,
(struct serial_struct *) arg);
case TIOCSERGETLSR: /* Get line status register */
error = verify_area(VERIFY_WRITE, (void *) arg,
sizeof(unsigned int));
if (error)
return error;
else
return get_lsr_info(info, (unsigned int *) arg);
case TIOCSERGSTRUCT:
error = verify_area(VERIFY_WRITE, (void *) arg,
sizeof(struct m68k_serial));
if (error)
return error;
copy_to_user((struct m68k_serial *) arg,
info, sizeof(struct m68k_serial));
return 0;
default:
return -ENOIOCTLCMD;
}
return 0;
}
static void rs_set_termios(struct tty_struct *tty, struct termios *old_termios)
{
struct m68k_serial *info = (struct m68k_serial *)tty->driver_data;
if (tty->termios->c_cflag == old_termios->c_cflag)
return;
change_speed(info);
if ((old_termios->c_cflag & CRTSCTS) &&
!(tty->termios->c_cflag & CRTSCTS)) {
tty->hw_stopped = 0;
rs_start(tty);
}
}
/*
* ------------------------------------------------------------
* rs_close()
*
* This routine is called when the serial port gets closed. First, we
* wait for the last remaining data to be sent. Then, we unlink its
* S structure from the interrupt chain if necessary, and we free
* that IRQ if nothing is left in the chain.
* ------------------------------------------------------------
*/
static void rs_close(struct tty_struct *tty, struct file * filp)
{
struct m68k_serial * info = (struct m68k_serial *)tty->driver_data;
m68328_uart *uart = &uart_addr[info->line];
unsigned long flags;
if (!info || serial_paranoia_check(info, tty->device, "rs_close"))
return;
save_flags(flags); cli();
if (tty_hung_up_p(filp)) {
restore_flags(flags);
return;
}
if ((tty->count == 1) && (info->count != 1)) {
/*
* Uh, oh. tty->count is 1, which means that the tty
* structure will be freed. Info->count should always
* be one in these conditions. If it's greater than
* one, we've got real problems, since it means the
* serial port won't be shutdown.
*/
printk("rs_close: bad serial port count; tty->count is 1, "
"info->count is %d\n", info->count);
info->count = 1;
}
if (--info->count < 0) {
printk("rs_close: bad serial port count for ttyS%d: %d\n",
info->line, info->count);
info->count = 0;
}
if (info->count) {
restore_flags(flags);
return;
}
info->flags |= S_CLOSING;
/*
* Save the termios structure, since this port may have
* separate termios for callout and dialin.
*/
if (info->flags & S_NORMAL_ACTIVE)
info->normal_termios = *tty->termios;
if (info->flags & S_CALLOUT_ACTIVE)
info->callout_termios = *tty->termios;
/*
* Now we wait for the transmit buffer to clear; and we notify
* the line discipline to only process XON/XOFF characters.
*/
tty->closing = 1;
if (info->closing_wait != S_CLOSING_WAIT_NONE)
tty_wait_until_sent(tty, info->closing_wait);
/*
* At this point we stop accepting input. To do this, we
* disable the receive line status interrupts, and tell the
* interrupt driver to stop checking the data ready bit in the
* line status register.
*/
uart->ustcnt &= ~USTCNT_RXEN;
uart->ustcnt &= ~(USTCNT_RXEN | USTCNT_RX_INTR_MASK);
shutdown(info);
if (tty->driver.flush_buffer)
tty->driver.flush_buffer(tty);
if (tty->ldisc.flush_buffer)
tty->ldisc.flush_buffer(tty);
tty->closing = 0;
info->event = 0;
info->tty = 0;
if (tty->ldisc.num != ldiscs[N_TTY].num) {
if (tty->ldisc.close)
(tty->ldisc.close)(tty);
tty->ldisc = ldiscs[N_TTY];
tty->termios->c_line = N_TTY;
if (tty->ldisc.open)
(tty->ldisc.open)(tty);
}
if (info->blocked_open) {
if (info->close_delay) {
current->state = TASK_INTERRUPTIBLE;
schedule_timeout(info->close_delay);
}
wake_up_interruptible(&info->open_wait);
}
info->flags &= ~(S_NORMAL_ACTIVE|S_CALLOUT_ACTIVE|
S_CLOSING);
wake_up_interruptible(&info->close_wait);
restore_flags(flags);
}
/*
* rs_hangup() --- called by tty_hangup() when a hangup is signaled.
*/
void rs_hangup(struct tty_struct *tty)
{
struct m68k_serial * info = (struct m68k_serial *)tty->driver_data;
if (serial_paranoia_check(info, tty->device, "rs_hangup"))
return;
rs_flush_buffer(tty);
shutdown(info);
info->event = 0;
info->count = 0;
info->flags &= ~(S_NORMAL_ACTIVE|S_CALLOUT_ACTIVE);
info->tty = 0;
wake_up_interruptible(&info->open_wait);
}
/*
* ------------------------------------------------------------
* rs_open() and friends
* ------------------------------------------------------------
*/
static int block_til_ready(struct tty_struct *tty, struct file * filp,
struct m68k_serial *info)
{
DECLARE_WAITQUEUE(wait, current);
int retval;
int do_clocal = 0;
/*
* If the device is in the middle of being closed, then block
* until it's done, and then try again.
*/
if (info->flags & S_CLOSING) {
interruptible_sleep_on(&info->close_wait);
#ifdef SERIAL_DO_RESTART
if (info->flags & S_HUP_NOTIFY)
return -EAGAIN;
else
return -ERESTARTSYS;
#else
return -EAGAIN;
#endif
}
/*
* If this is a callout device, then just make sure the normal
* device isn't being used.
*/
if (tty->driver.subtype == SERIAL_TYPE_CALLOUT) {
if (info->flags & S_NORMAL_ACTIVE)
return -EBUSY;
if ((info->flags & S_CALLOUT_ACTIVE) &&
(info->flags & S_SESSION_LOCKOUT) &&
(info->session != current->session))
return -EBUSY;
if ((info->flags & S_CALLOUT_ACTIVE) &&
(info->flags & S_PGRP_LOCKOUT) &&
(info->pgrp != current->pgrp))
return -EBUSY;
info->flags |= S_CALLOUT_ACTIVE;
return 0;
}
/*
* If non-blocking mode is set, or the port is not enabled,
* then make the check up front and then exit.
*/
if ((filp->f_flags & O_NONBLOCK) ||
(tty->flags & (1 << TTY_IO_ERROR))) {
if (info->flags & S_CALLOUT_ACTIVE)
return -EBUSY;
info->flags |= S_NORMAL_ACTIVE;
return 0;
}
if (info->flags & S_CALLOUT_ACTIVE) {
if (info->normal_termios.c_cflag & CLOCAL)
do_clocal = 1;
} else {
if (tty->termios->c_cflag & CLOCAL)
do_clocal = 1;
}
/*
* Block waiting for the carrier detect and the line to become
* free (i.e., not in use by the callout). While we are in
* this loop, info->count is dropped by one, so that
* rs_close() knows when to free things. We restore it upon
* exit, either normal or abnormal.
*/
retval = 0;
add_wait_queue(&info->open_wait, &wait);
info->count--;
info->blocked_open++;
while (1) {
cli();
if (!(info->flags & S_CALLOUT_ACTIVE))
m68k_rtsdtr(info, 1);
sti();
current->state = TASK_INTERRUPTIBLE;
if (tty_hung_up_p(filp) ||
!(info->flags & S_INITIALIZED)) {
#ifdef SERIAL_DO_RESTART
if (info->flags & S_HUP_NOTIFY)
retval = -EAGAIN;
else
retval = -ERESTARTSYS;
#else
retval = -EAGAIN;
#endif
break;
}
if (!(info->flags & S_CALLOUT_ACTIVE) &&
!(info->flags & S_CLOSING) && do_clocal)
break;
if (signal_pending(current)) {
retval = -ERESTARTSYS;
break;
}
schedule();
}
current->state = TASK_RUNNING;
remove_wait_queue(&info->open_wait, &wait);
if (!tty_hung_up_p(filp))
info->count++;
info->blocked_open--;
if (retval)
return retval;
info->flags |= S_NORMAL_ACTIVE;
return 0;
}
/*
* This routine is called whenever a serial port is opened. It
* enables interrupts for a serial port, linking in its S structure into
* the IRQ chain. It also performs the serial-specific
* initialization for the tty structure.
*/
int rs_open(struct tty_struct *tty, struct file * filp)
{
struct m68k_serial *info;
int retval, line;
line = minor(tty->device) - tty->driver.minor_start;
if (line >= NR_PORTS || line < 0) /* we have exactly one */
return -ENODEV;
info = &m68k_soft[line];
if (serial_paranoia_check(info, tty->device, "rs_open"))
return -ENODEV;
info->count++;
tty->driver_data = info;
info->tty = tty;
/*
* Start up serial port
*/
retval = startup(info);
if (retval)
return retval;
retval = block_til_ready(tty, filp, info);
if (retval) {
return retval;
}
if ((info->count == 1) && (info->flags & S_SPLIT_TERMIOS)) {
if (tty->driver.subtype == SERIAL_TYPE_NORMAL)
*tty->termios = info->normal_termios;
else
*tty->termios = info->callout_termios;
change_speed(info);
}
info->session = current->session;
info->pgrp = current->pgrp;
return 0;
}
/* Finally, routines used to initialize the serial driver. */
static void show_serial_version(void)
{
printk("MC68328 serial driver version 1.00\n");
}
#ifdef CONFIG_PM
/* Serial Power management
* The console (currently fixed at line 0) is a special case for power
* management because the kernel is so chatty. The console will be
* explicitly disabled my our power manager as the last minute, so we won't
* mess with it here.
*/
static struct pm_dev *serial_pm[NR_PORTS];
static int serial_pm_callback(struct pm_dev *dev, pm_request_t request, void *data)
{
struct m68k_serial *info = (struct m68k_serial *)dev->data;
if(info == NULL)
return -1;
/* special case for line 0 - pm restores it */
if(info->line == 0)
return 0;
switch (request) {
case PM_SUSPEND:
shutdown(info);
break;
case PM_RESUME:
startup(info);
break;
}
return 0;
}
void shutdown_console(void)
{
struct m68k_serial *info = &m68k_soft[0];
/* HACK: wait a bit for any pending printk's to be dumped */
{
int i = 10000;
while(i--);
}
shutdown(info);
}
void startup_console(void)
{
struct m68k_serial *info = &m68k_soft[0];
startup(info);
}
#endif
/* rs_init inits the driver */
static int __init
rs68328_init(void)
{
int flags, i;
struct m68k_serial *info;
show_serial_version();
/* Initialize the tty_driver structure */
/* SPARC: Not all of this is exactly right for us. */
memset(&serial_driver, 0, sizeof(struct tty_driver));
serial_driver.magic = TTY_DRIVER_MAGIC;
serial_driver.name = "ttyS";
serial_driver.major = TTY_MAJOR;
serial_driver.minor_start = 64;
serial_driver.num = NR_PORTS;
serial_driver.type = TTY_DRIVER_TYPE_SERIAL;
serial_driver.subtype = SERIAL_TYPE_NORMAL;
serial_driver.init_termios = tty_std_termios;
serial_driver.init_termios.c_cflag =
m68328_console_cbaud | CS8 | CREAD | HUPCL | CLOCAL;
serial_driver.flags = TTY_DRIVER_REAL_RAW;
serial_driver.refcount = &serial_refcount;
serial_driver.table = serial_table;
serial_driver.termios = serial_termios;
serial_driver.termios_locked = serial_termios_locked;
serial_driver.open = rs_open;
serial_driver.close = rs_close;
serial_driver.write = rs_write;
serial_driver.flush_chars = rs_flush_chars;
serial_driver.write_room = rs_write_room;
serial_driver.chars_in_buffer = rs_chars_in_buffer;
serial_driver.flush_buffer = rs_flush_buffer;
serial_driver.ioctl = rs_ioctl;
serial_driver.throttle = rs_throttle;
serial_driver.unthrottle = rs_unthrottle;
serial_driver.set_termios = rs_set_termios;
serial_driver.stop = rs_stop;
serial_driver.start = rs_start;
serial_driver.hangup = rs_hangup;
serial_driver.set_ldisc = rs_set_ldisc;
/*
* The callout device is just like normal device except for
* major number and the subtype code.
*/
callout_driver = serial_driver;
callout_driver.name = "cua";
callout_driver.major = TTYAUX_MAJOR;
callout_driver.subtype = SERIAL_TYPE_CALLOUT;
if (tty_register_driver(&serial_driver))
panic("Couldn't register serial driver\n");
if (tty_register_driver(&callout_driver))
panic("Couldn't register callout driver\n");
save_flags(flags); cli();
for(i=0;i<NR_PORTS;i++) {
info = &m68k_soft[i];
info->magic = SERIAL_MAGIC;
info->port = (int) &uart_addr[i];
info->tty = 0;
info->irq = uart_irqs[i];
info->custom_divisor = 16;
info->close_delay = 50;
info->closing_wait = 3000;
info->x_char = 0;
info->event = 0;
info->count = 0;
info->blocked_open = 0;
INIT_WORK(&info->tqueue, do_softint, info);
INIT_WORK(&info->tqueue_hangup, do_serial_hangup, info);
info->callout_termios =callout_driver.init_termios;
info->normal_termios = serial_driver.init_termios;
init_waitqueue_head(&info->open_wait);
init_waitqueue_head(&info->close_wait);
info->line = i;
info->is_cons = 1; /* Means shortcuts work */
printk("%s%d at 0x%08x (irq = %d)", serial_driver.name, info->line,
info->port, info->irq);
printk(" is a builtin MC68328 UART\n");
IRQ_ports[info->irq] = info; /* waste of space */
#ifdef CONFIG_M68VZ328
if (i > 0 )
PJSEL &= 0xCF; /* PSW enable second port output */
#endif
if (request_irq(uart_irqs[i],
rs_interrupt,
IRQ_FLG_STD,
"M68328_UART", NULL))
panic("Unable to attach 68328 serial interrupt\n");
#ifdef CONFIG_PM
serial_pm[i] = pm_register(PM_SYS_DEV, PM_SYS_COM, serial_pm_callback);
if (serial_pm[i])
serial_pm[i]->data = info;
#endif
}
restore_flags(flags);
return 0;
}
/*
* register_serial and unregister_serial allows for serial ports to be
* configured at run-time, to support PCMCIA modems.
*/
/* SPARC: Unused at this time, just here to make things link. */
int register_serial(struct serial_struct *req)
{
return -1;
}
void unregister_serial(int line)
{
return;
}
module_init(rs68328_init);
/* DAVIDM module_exit(rs68328_fini); */
static void m68328_set_baud(void)
{
unsigned short ustcnt;
int i;
ustcnt = USTCNT;
USTCNT = ustcnt & ~USTCNT_TXEN;
again:
for (i = 0; i < sizeof(baud_table) / sizeof(baud_table[0]); i++)
if (baud_table[i] == m68328_console_baud)
break;
if (i >= sizeof(baud_table) / sizeof(baud_table[0])) {
m68328_console_baud = 9600;
goto again;
}
UBAUD = PUT_FIELD(UBAUD_DIVIDE, hw_baud_table[i].divisor) |
PUT_FIELD(UBAUD_PRESCALER, hw_baud_table[i].prescale);
ustcnt &= ~(USTCNT_PARITYEN | USTCNT_ODD_EVEN | USTCNT_STOP | USTCNT_8_7);
ustcnt |= USTCNT_8_7;
ustcnt |= USTCNT_TXEN;
USTCNT = ustcnt;
m68328_console_initted = 1;
return;
}
int m68328_console_setup(struct console *cp, char *arg)
{
int i, n = CONSOLE_BAUD_RATE;
if (!cp)
return(-1);
if (arg)
n = simple_strtoul(arg,NULL,0);
for (i = 0; i < BAUD_TABLE_SIZE; i++)
if (baud_table[i] == n)
break;
if (i < BAUD_TABLE_SIZE) {
m68328_console_baud = n;
m68328_console_cbaud = 0;
if (i > 15) {
m68328_console_cbaud |= CBAUDEX;
i -= 15;
}
m68328_console_cbaud |= i;
}
m68328_set_baud(); /* make sure baud rate changes */
return(0);
}
static kdev_t m68328_console_device(struct console *c)
{
return mk_kdev(TTY_MAJOR, 64 + c->index);
}
void m68328_console_write (struct console *co, const char *str,
unsigned int count)
{
if (!m68328_console_initted)
m68328_set_baud();
while (count--) {
if (*str == '\n')
rs_put_char('\r');
rs_put_char( *str++ );
}
}
static struct console m68328_driver = {
name: "ttyS",
write: m68328_console_write,
device: m68328_console_device,
setup: m68328_console_setup,
flags: CON_PRINTBUFFER,
index: -1,
};
void m68328_console_init(void)
{
register_console(&m68328_driver);
}
drivers/serial/68328serial.h 0 → 100644
View file @ 07834925
/* 68328serial.h: Definitions for the mc68328 serial driver.
*
* Copyright (C) 1995 David S. Miller <davem@caip.rutgers.edu>
* Copyright (C) 1998 Kenneth Albanowski <kjahds@kjahds.com>
* Copyright (C) 1998, 1999 D. Jeff Dionne <jeff@uclinux.org>
* Copyright (C) 1999 Vladimir Gurevich <vgurevic@cisco.com>
*
* VZ Support/Fixes Evan Stawnyczy <e@lineo.ca>
*/
#ifndef _MC683XX_SERIAL_H
#define _MC683XX_SERIAL_H
#include <linux/config.h>
struct serial_struct {
int type;
int line;
int port;
int irq;
int flags;
int xmit_fifo_size;
int custom_divisor;
int baud_base;
unsigned short close_delay;
char reserved_char[2];
int hub6; /* FIXME: We don't have AT&T Hub6 boards! */
unsigned short closing_wait; /* time to wait before closing */
unsigned short closing_wait2; /* no longer used... */
int reserved[4];
};
/*
* For the close wait times, 0 means wait forever for serial port to
* flush its output. 65535 means don't wait at all.
*/
#define S_CLOSING_WAIT_INF 0
#define S_CLOSING_WAIT_NONE 65535
/*
* Definitions for S_struct (and serial_struct) flags field
*/
#define S_HUP_NOTIFY 0x0001 /* Notify getty on hangups and closes
on the callout port */
#define S_FOURPORT 0x0002 /* Set OU1, OUT2 per AST Fourport settings */
#define S_SAK 0x0004 /* Secure Attention Key (Orange book) */
#define S_SPLIT_TERMIOS 0x0008 /* Separate termios for dialin/callout */
#define S_SPD_MASK 0x0030
#define S_SPD_HI 0x0010 /* Use 56000 instead of 38400 bps */
#define S_SPD_VHI 0x0020 /* Use 115200 instead of 38400 bps */
#define S_SPD_CUST 0x0030 /* Use user-specified divisor */
#define S_SKIP_TEST 0x0040 /* Skip UART test during autoconfiguration */
#define S_AUTO_IRQ 0x0080 /* Do automatic IRQ during autoconfiguration */
#define S_SESSION_LOCKOUT 0x0100 /* Lock out cua opens based on session */
#define S_PGRP_LOCKOUT 0x0200 /* Lock out cua opens based on pgrp */
#define S_CALLOUT_NOHUP 0x0400 /* Don't do hangups for cua device */
#define S_FLAGS 0x0FFF /* Possible legal S flags */
#define S_USR_MASK 0x0430 /* Legal flags that non-privileged
* users can set or reset */
/* Internal flags used only by kernel/chr_drv/serial.c */
#define S_INITIALIZED 0x80000000 /* Serial port was initialized */
#define S_CALLOUT_ACTIVE 0x40000000 /* Call out device is active */
#define S_NORMAL_ACTIVE 0x20000000 /* Normal device is active */
#define S_BOOT_AUTOCONF 0x10000000 /* Autoconfigure port on bootup */
#define S_CLOSING 0x08000000 /* Serial port is closing */
#define S_CTS_FLOW 0x04000000 /* Do CTS flow control */
#define S_CHECK_CD 0x02000000 /* i.e., CLOCAL */
/* Software state per channel */
#ifdef __KERNEL__
/*
* I believe this is the optimal setting that reduces the number of interrupts.
* At high speeds the output might become a little "bursted" (use USTCNT_TXHE
* if that bothers you), but in most cases it will not, since we try to
* transmit characters every time rs_interrupt is called. Thus, quite often
* you'll see that a receive interrupt occures before the transmit one.
* -- Vladimir Gurevich
*/
#define USTCNT_TX_INTR_MASK (USTCNT_TXEE)
/*
* 68328 and 68EZ328 UARTS are a little bit different. EZ328 has special
* "Old data interrupt" which occures whenever the data stay in the FIFO
* longer than 30 bits time. This allows us to use FIFO without compromising
* latency. '328 does not have this feature and without the real 328-based
* board I would assume that RXRE is the safest setting.
*
* For EZ328 I use RXHE (Half empty) interrupt to reduce the number of
* interrupts. RXFE (receive queue full) causes the system to loose data
* at least at 115200 baud
*
* If your board is busy doing other stuff, you might consider to use
* RXRE (data ready intrrupt) instead.
*
* The other option is to make these INTR masks run-time configurable, so
* that people can dynamically adapt them according to the current usage.
* -- Vladimir Gurevich
*/
/* (es) */
#if defined(CONFIG_M68EZ328) || defined(CONFIG_M68VZ328)
#define USTCNT_RX_INTR_MASK (USTCNT_RXHE | USTCNT_ODEN)
#elif defined(CONFIG_M68328)
#define USTCNT_RX_INTR_MASK (USTCNT_RXRE)
#else
#error Please, define the Rx interrupt events for your CPU
#endif
/* (/es) */
/*
* This is our internal structure for each serial port's state.
*
* Many fields are paralleled by the structure used by the serial_struct
* structure.
*
* For definitions of the flags field, see tty.h
*/
struct m68k_serial {
char soft_carrier; /* Use soft carrier on this channel */
char break_abort; /* Is serial console in, so process brk/abrt */
char is_cons; /* Is this our console. */
/* We need to know the current clock divisor
* to read the bps rate the chip has currently
* loaded.
*/
unsigned char clk_divisor; /* May be 1, 16, 32, or 64 */
int baud;
int magic;
int baud_base;
int port;
int irq;
int flags; /* defined in tty.h */
int type; /* UART type */
struct tty_struct *tty;
int read_status_mask;
int ignore_status_mask;
int timeout;
int xmit_fifo_size;
int custom_divisor;
int x_char; /* xon/xoff character */
int close_delay;
unsigned short closing_wait;
unsigned short closing_wait2;
unsigned long event;
unsigned long last_active;
int line;
int count; /* # of fd on device */
int blocked_open; /* # of blocked opens */
long session; /* Session of opening process */
long pgrp; /* pgrp of opening process */
unsigned char *xmit_buf;
int xmit_head;
int xmit_tail;
int xmit_cnt;
struct workqueue tqueue;
struct workqueue tqueue_hangup;
struct termios normal_termios;
struct termios callout_termios;
wait_queue_head_t open_wait;
wait_queue_head_t close_wait;
};
#define SERIAL_MAGIC 0x5301
/*
* The size of the serial xmit buffer is 1 page, or 4096 bytes
*/
#define SERIAL_XMIT_SIZE 4096
/*
* Events are used to schedule things to happen at timer-interrupt
* time, instead of at rs interrupt time.
*/
#define RS_EVENT_WRITE_WAKEUP 0
/*
* Define the number of ports supported and their irqs.
*/
#ifndef CONFIG_68328_SERIAL_UART2
#define NR_PORTS 1
#define UART_IRQ_DEFNS {UART_IRQ_NUM}
#else
#define NR_PORTS 2
#define UART_IRQ_DEFNS {UART1_IRQ_NUM, UART2_IRQ_NUM}
#endif
#endif /* __KERNEL__ */
#endif /* !(_MC683XX_SERIAL_H) */
drivers/serial/68360serial.c 0 → 100644
View file @ 07834925
/*
* UART driver for 68360 CPM SCC or SMC
* Copyright (c) 2000 D. Jeff Dionne <jeff@uclinux.org>,
* Copyright (c) 2000 Michael Leslie <mleslie@lineo.ca>
* Copyright (c) 1997 Dan Malek <dmalek@jlc.net>
*
* I used the serial.c driver as the framework for this driver.
* Give credit to those guys.
* The original code was written for the MBX860 board. I tried to make
* it generic, but there may be some assumptions in the structures that
* have to be fixed later.
* To save porting time, I did not bother to change any object names
* that are not accessed outside of this file.
* It still needs lots of work........When it was easy, I included code
* to support the SCCs, but this has never been tested, nor is it complete.
* Only the SCCs support modem control, so that is not complete either.
*
* This module exports the following rs232 io functions:
*
* int rs_360_init(void);
*/
#include <linux/config.h>
#include <linux/module.h>
#include <linux/errno.h>
#include <linux/signal.h>
#include <linux/sched.h>
#include <linux/timer.h>
#include <linux/interrupt.h>
#include <linux/tty.h>
#include <linux/tty_flip.h>
#include <linux/serial.h>
#include <linux/serialP.h>
#include <linux/major.h>
#include <linux/string.h>
#include <linux/fcntl.h>
#include <linux/ptrace.h>
#include <linux/mm.h>
#include <linux/malloc.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <asm/irq.h>
#include <linux/compatmac.h>
#include <asm/m68360.h>
#include <asm/commproc.h>
#ifdef CONFIG_KGDB
extern void breakpoint(void);
extern void set_debug_traps(void);
extern int kgdb_output_string (const char* s, unsigned int count);
#endif
/* #ifdef CONFIG_SERIAL_CONSOLE */ /* This seems to be a post 2.0 thing - mles */
#include <linux/console.h>
/* this defines the index into rs_table for the port to use
*/
#ifndef CONFIG_SERIAL_CONSOLE_PORT
#define CONFIG_SERIAL_CONSOLE_PORT 1 /* ie SMC2 - note USE_SMC2 must be defined */
#endif
/* #endif */
#if 0
/* SCC2 for console
*/
#undef CONFIG_SERIAL_CONSOLE_PORT
#define CONFIG_SERIAL_CONSOLE_PORT 2
#endif
#define TX_WAKEUP ASYNC_SHARE_IRQ
static char *serial_name = "CPM UART driver";
static char *serial_version = "0.03";
static DECLARE_TASK_QUEUE(tq_serial);
static struct tty_driver serial_driver, callout_driver;
static int serial_refcount;
int serial_console_setup(struct console *co, char *options);
/*
* Serial driver configuration section. Here are the various options:
*/
#define SERIAL_PARANOIA_CHECK
#define CONFIG_SERIAL_NOPAUSE_IO
#define SERIAL_DO_RESTART
/* Set of debugging defines */
#undef SERIAL_DEBUG_INTR
#undef SERIAL_DEBUG_OPEN
#undef SERIAL_DEBUG_FLOW
#undef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT
#define _INLINE_ inline
#define DBG_CNT(s)
/* We overload some of the items in the data structure to meet our
* needs. For example, the port address is the CPM parameter ram
* offset for the SCC or SMC. The maximum number of ports is 4 SCCs and
* 2 SMCs. The "hub6" field is used to indicate the channel number, with
* a flag indicating SCC or SMC, and the number is used as an index into
* the CPM parameter area for this device.
* The "type" field is currently set to 0, for PORT_UNKNOWN. It is
* not currently used. I should probably use it to indicate the port
* type of SMC or SCC.
* The SMCs do not support any modem control signals.
*/
#define smc_scc_num hub6
#define NUM_IS_SCC ((int)0x00010000)
#define PORT_NUM(P) ((P) & 0x0000ffff)
#if defined (CONFIG_UCQUICC)
volatile extern void *_periph_base;
/* sipex transceiver
* mode bits for are on pins
*
* SCC2 d16..19
* SCC3 d20..23
* SCC4 d24..27
*/
#define SIPEX_MODE(n,m) ((m & 0x0f)<<(16+4*(n-1)))
static uint sipex_mode_bits = 0x00000000;
#endif
/* There is no `serial_state' defined back here in 2.0.
* Try to get by with serial_struct
*/
/* #define serial_state serial_struct */
/* 2.4 -> 2.0 portability problem: async_icount in 2.4 has a few
* extras: */
#if 0
struct async_icount_24 {
__u32 cts, dsr, rng, dcd, tx, rx;
__u32 frame, parity, overrun, brk;
__u32 buf_overrun;
} icount;
#endif
#if 0
struct serial_state {
int magic;
int baud_base;
unsigned long port;
int irq;
int flags;
int hub6;
int type;
int line;
int revision; /* Chip revision (950) */
int xmit_fifo_size;
int custom_divisor;
int count;
u8 *iomem_base;
u16 iomem_reg_shift;
unsigned short close_delay;
unsigned short closing_wait; /* time to wait before closing */
struct async_icount_24 icount;
struct termios normal_termios;
struct termios callout_termios;
int io_type;
struct async_struct *info;
};
#endif
#define SSTATE_MAGIC 0x5302
/* SMC2 is sometimes used for low performance TDM interfaces. Define
* this as 1 if you want SMC2 as a serial port UART managed by this driver.
* Define this as 0 if you wish to use SMC2 for something else.
*/
#define USE_SMC2 1
#if 0
/* Define SCC to ttySx mapping. */
#define SCC_NUM_BASE (USE_SMC2 + 1) /* SCC base tty "number" */
/* Define which SCC is the first one to use for a serial port. These
* are 0-based numbers, i.e. this assumes the first SCC (SCC1) is used
* for Ethernet, and the first available SCC for serial UART is SCC2.
* NOTE: IF YOU CHANGE THIS, you have to change the PROFF_xxx and
* interrupt vectors in the table below to match.
*/
#define SCC_IDX_BASE 1 /* table index */
#endif
/* Processors other than the 860 only get SMCs configured by default.
* Either they don't have SCCs or they are allocated somewhere else.
* Of course, there are now 860s without some SCCs, so we will need to
* address that someday.
* The Embedded Planet Multimedia I/O cards use TDM interfaces to the
* stereo codec parts, and we use SMC2 to help support that.
*/
static struct serial_state rs_table[] = {
/* type line PORT IRQ FLAGS smc_scc_num (F.K.A. hub6) */
{ 0, 0, PRSLOT_SMC1, CPMVEC_SMC1, 0, 0 } /* SMC1 ttyS0 */
#if USE_SMC2
,{ 0, 0, PRSLOT_SMC2, CPMVEC_SMC2, 0, 1 } /* SMC2 ttyS1 */
#endif
#if defined(CONFIG_SERIAL_68360_SCC)
,{ 0, 0, PRSLOT_SCC2, CPMVEC_SCC2, 0, (NUM_IS_SCC | 1) } /* SCC2 ttyS2 */
,{ 0, 0, PRSLOT_SCC3, CPMVEC_SCC3, 0, (NUM_IS_SCC | 2) } /* SCC3 ttyS3 */
,{ 0, 0, PRSLOT_SCC4, CPMVEC_SCC4, 0, (NUM_IS_SCC | 3) } /* SCC4 ttyS4 */
#endif
};
#define NR_PORTS (sizeof(rs_table)/sizeof(struct serial_state))
static struct tty_struct *serial_table[NR_PORTS];
static struct termios *serial_termios[NR_PORTS];
static struct termios *serial_termios_locked[NR_PORTS];
/* The number of buffer descriptors and their sizes.
*/
#define RX_NUM_FIFO 4
#define RX_BUF_SIZE 32
#define TX_NUM_FIFO 4
#define TX_BUF_SIZE 32
#define CONSOLE_NUM_FIFO 2
#define CONSOLE_BUF_SIZE 4
char *console_fifos[CONSOLE_NUM_FIFO * CONSOLE_BUF_SIZE];
/* The async_struct in serial.h does not really give us what we
* need, so define our own here.
*/
typedef struct serial_info {
int magic;
int flags;
struct serial_state *state;
/* struct serial_struct *state; */
/* struct async_struct *state; */
struct tty_struct *tty;
int read_status_mask;
int ignore_status_mask;
int timeout;
int line;
int x_char; /* xon/xoff character */
int close_delay;
unsigned short closing_wait;
unsigned short closing_wait2;
unsigned long event;
unsigned long last_active;
int blocked_open; /* # of blocked opens */
long session; /* Session of opening process */
long pgrp; /* pgrp of opening process */
struct tq_struct tqueue;
struct tq_struct tqueue_hangup;
wait_queue_head_t open_wait;
wait_queue_head_t close_wait;
/* struct wait_queue *open_wait; */
/* struct wait_queue *close_wait;i */
/* CPM Buffer Descriptor pointers.
*/
QUICC_BD *rx_bd_base;
QUICC_BD *rx_cur;
QUICC_BD *tx_bd_base;
QUICC_BD *tx_cur;
} ser_info_t;
/* since kmalloc_init() does not get called until much after this initialization: */
static ser_info_t quicc_ser_info[NR_PORTS];
static char rx_buf_pool[NR_PORTS * RX_NUM_FIFO * RX_BUF_SIZE];
static char tx_buf_pool[NR_PORTS * TX_NUM_FIFO * TX_BUF_SIZE];
static void change_speed(ser_info_t *info);
static void rs_360_wait_until_sent(struct tty_struct *tty, int timeout);
static inline int serial_paranoia_check(ser_info_t *info,
kdev_t device, const char *routine)
{
#ifdef SERIAL_PARANOIA_CHECK
static const char *badmagic =
"Warning: bad magic number for serial struct (%s) in %s\n";
static const char *badinfo =
"Warning: null async_struct for (%s) in %s\n";
if (!info) {
printk(badinfo, kdevname(device), routine);
return 1;
}
if (info->magic != SERIAL_MAGIC) {
printk(badmagic, kdevname(device), routine);
return 1;
}
#endif
return 0;
}
/*
* This is used to figure out the divisor speeds and the timeouts,
* indexed by the termio value. The generic CPM functions are responsible
* for setting and assigning baud rate generators for us.
*/
static int baud_table[] = {
0, 50, 75, 110, 134, 150, 200, 300, 600, 1200, 1800, 2400, 4800,
9600, 19200, 38400, 57600, 115200, 230400, 460800, 0 };
/* This sucks. There is a better way: */
#if defined(CONFIG_CONSOLE_9600)
#define CONSOLE_BAUDRATE 9600
#elif defined(CONFIG_CONSOLE_19200)
#define CONSOLE_BAUDRATE 19200
#elif defined(CONFIG_CONSOLE_115200)
#define CONSOLE_BAUDRATE 115200
#else
#error "console baud rate undefined"
#endif
/*
* ------------------------------------------------------------
* rs_stop() and rs_start()
*
* This routines are called before setting or resetting tty->stopped.
* They enable or disable transmitter interrupts, as necessary.
* ------------------------------------------------------------
*/
static void rs_360_stop(struct tty_struct *tty)
{
ser_info_t *info = (ser_info_t *)tty->driver_data;
int idx;
unsigned long flags;
volatile struct scc_regs *sccp;
volatile struct smc_regs *smcp;
if (serial_paranoia_check(info, tty->device, "rs_stop"))
return;
local_irq_save(flags);
idx = PORT_NUM(info->state->smc_scc_num);
if (info->state->smc_scc_num & NUM_IS_SCC) {
sccp = &pquicc->scc_regs[idx];
sccp->scc_sccm &= ~UART_SCCM_TX;
} else {
/* smcp = &cpmp->cp_smc[idx]; */
smcp = &pquicc->smc_regs[idx];
smcp->smc_smcm &= ~SMCM_TX;
}
local_irq_restore(flags);
}
static void rs_360_start(struct tty_struct *tty)
{
ser_info_t *info = (ser_info_t *)tty->driver_data;
int idx;
unsigned long flags;
volatile struct scc_regs *sccp;
volatile struct smc_regs *smcp;
if (serial_paranoia_check(info, tty->device, "rs_stop"))
return;
local_irq_save(flags);
idx = PORT_NUM(info->state->smc_scc_num);
if (info->state->smc_scc_num & NUM_IS_SCC) {
sccp = &pquicc->scc_regs[idx];
sccp->scc_sccm |= UART_SCCM_TX;
} else {
smcp = &pquicc->smc_regs[idx];
smcp->smc_smcm |= SMCM_TX;
}
local_irq_restore(flags);
}
/*
* ----------------------------------------------------------------------
*
* Here starts the interrupt handling routines. All of the following
* subroutines are declared as inline and are folded into
* rs_interrupt(). They were separated out for readability's sake.
*
* Note: rs_interrupt() is a "fast" interrupt, which means that it
* runs with interrupts turned off. People who may want to modify
* rs_interrupt() should try to keep the interrupt handler as fast as
* possible. After you are done making modifications, it is not a bad
* idea to do:
*
* gcc -S -DKERNEL -Wall -Wstrict-prototypes -O6 -fomit-frame-pointer serial.c
*
* and look at the resulting assemble code in serial.s.
*
* - Ted Ts'o (tytso@mit.edu), 7-Mar-93
* -----------------------------------------------------------------------
*/
/*
* This routine is used by the interrupt handler to schedule
* processing in the software interrupt portion of the driver.
*/
static _INLINE_ void rs_sched_event(ser_info_t *info,
int event)
{
info->event |= 1 << event;
queue_task(&info->tqueue, &tq_serial);
mark_bh(SERIAL_BH);
}
static _INLINE_ void receive_chars(ser_info_t *info)
{
struct tty_struct *tty = info->tty;
unsigned char ch, *cp;
/*int ignored = 0;*/
int i;
ushort status;
struct async_icount *icount;
/* struct async_icount_24 *icount; */
volatile QUICC_BD *bdp;
icount = &info->state->icount;
/* Just loop through the closed BDs and copy the characters into
* the buffer.
*/
bdp = info->rx_cur;
for (;;) {
if (bdp->status & BD_SC_EMPTY) /* If this one is empty */
break; /* we are all done */
/* The read status mask tell us what we should do with
* incoming characters, especially if errors occur.
* One special case is the use of BD_SC_EMPTY. If
* this is not set, we are supposed to be ignoring
* inputs. In this case, just mark the buffer empty and
* continue.
*/
if (!(info->read_status_mask & BD_SC_EMPTY)) {
bdp->status |= BD_SC_EMPTY;
bdp->status &=
~(BD_SC_BR | BD_SC_FR | BD_SC_PR | BD_SC_OV);
if (bdp->status & BD_SC_WRAP)
bdp = info->rx_bd_base;
else
bdp++;
continue;
}
/* Get the number of characters and the buffer pointer.
*/
i = bdp->length;
/* cp = (unsigned char *)__va(bdp->buf); */
cp = (char *)bdp->buf;
status = bdp->status;
/* Check to see if there is room in the tty buffer for
* the characters in our BD buffer. If not, we exit
* now, leaving the BD with the characters. We'll pick
* them up again on the next receive interrupt (which could
* be a timeout).
*/
if ((tty->flip.count + i) >= TTY_FLIPBUF_SIZE)
break;
while (i-- > 0) {
ch = *cp++;
*tty->flip.char_buf_ptr = ch;
icount->rx++;
#ifdef SERIAL_DEBUG_INTR
printk("DR%02x:%02x...", ch, status);
#endif
*tty->flip.flag_buf_ptr = 0;
if (status & (BD_SC_BR | BD_SC_FR |
BD_SC_PR | BD_SC_OV)) {
/*
* For statistics only
*/
if (status & BD_SC_BR)
icount->brk++;
else if (status & BD_SC_PR)
icount->parity++;
else if (status & BD_SC_FR)
icount->frame++;
if (status & BD_SC_OV)
icount->overrun++;
/*
* Now check to see if character should be
* ignored, and mask off conditions which
* should be ignored.
if (status & info->ignore_status_mask) {
if (++ignored > 100)
break;
continue;
}
*/
status &= info->read_status_mask;
if (status & (BD_SC_BR)) {
#ifdef SERIAL_DEBUG_INTR
printk("handling break....");
#endif
*tty->flip.flag_buf_ptr = TTY_BREAK;
if (info->flags & ASYNC_SAK)
do_SAK(tty);
} else if (status & BD_SC_PR)
*tty->flip.flag_buf_ptr = TTY_PARITY;
else if (status & BD_SC_FR)
*tty->flip.flag_buf_ptr = TTY_FRAME;
if (status & BD_SC_OV) {
/*
* Overrun is special, since it's
* reported immediately, and doesn't
* affect the current character
*/
if (tty->flip.count < TTY_FLIPBUF_SIZE) {
tty->flip.count++;
tty->flip.flag_buf_ptr++;
tty->flip.char_buf_ptr++;
*tty->flip.flag_buf_ptr =
TTY_OVERRUN;
}
}
}
if (tty->flip.count >= TTY_FLIPBUF_SIZE)
break;
tty->flip.flag_buf_ptr++;
tty->flip.char_buf_ptr++;
tty->flip.count++;
}
/* This BD is ready to be used again. Clear status.
* Get next BD.
*/
bdp->status |= BD_SC_EMPTY;
bdp->status &= ~(BD_SC_BR | BD_SC_FR | BD_SC_PR | BD_SC_OV);
if (bdp->status & BD_SC_WRAP)
bdp = info->rx_bd_base;
else
bdp++;
}
info->rx_cur = (QUICC_BD *)bdp;
queue_task(&tty->flip.tqueue, &tq_timer);
}
static _INLINE_ void receive_break(ser_info_t *info)
{
struct tty_struct *tty = info->tty;
info->state->icount.brk++;
/* Check to see if there is room in the tty buffer for
* the break. If not, we exit now, losing the break. FIXME
*/
if ((tty->flip.count + 1) >= TTY_FLIPBUF_SIZE)
return;
*(tty->flip.flag_buf_ptr++) = TTY_BREAK;
*(tty->flip.char_buf_ptr++) = 0;
tty->flip.count++;
queue_task(&tty->flip.tqueue, &tq_timer);
}
static _INLINE_ void transmit_chars(ser_info_t *info)
{
if ((info->flags & TX_WAKEUP) ||
(info->tty->flags & (1 << TTY_DO_WRITE_WAKEUP))) {
rs_sched_event(info, RS_EVENT_WRITE_WAKEUP);
}
#ifdef SERIAL_DEBUG_INTR
printk("THRE...");
#endif
}
#ifdef notdef
/* I need to do this for the SCCs, so it is left as a reminder.
*/
static _INLINE_ void check_modem_status(struct async_struct *info)
{
int status;
/* struct async_icount *icount; */
struct async_icount_24 *icount;
status = serial_in(info, UART_MSR);
if (status & UART_MSR_ANY_DELTA) {
icount = &info->state->icount;
/* update input line counters */
if (status & UART_MSR_TERI)
icount->rng++;
if (status & UART_MSR_DDSR)
icount->dsr++;
if (status & UART_MSR_DDCD) {
icount->dcd++;
#ifdef CONFIG_HARD_PPS
if ((info->flags & ASYNC_HARDPPS_CD) &&
(status & UART_MSR_DCD))
hardpps();
#endif
}
if (status & UART_MSR_DCTS)
icount->cts++;
wake_up_interruptible(&info->delta_msr_wait);
}
if ((info->flags & ASYNC_CHECK_CD) && (status & UART_MSR_DDCD)) {
#if (defined(SERIAL_DEBUG_OPEN) || defined(SERIAL_DEBUG_INTR))
printk("ttys%d CD now %s...", info->line,
(status & UART_MSR_DCD) ? "on" : "off");
#endif
if (status & UART_MSR_DCD)
wake_up_interruptible(&info->open_wait);
else if (!((info->flags & ASYNC_CALLOUT_ACTIVE) &&
(info->flags & ASYNC_CALLOUT_NOHUP))) {
#ifdef SERIAL_DEBUG_OPEN
printk("scheduling hangup...");
#endif
queue_task(&info->tqueue_hangup,
&tq_scheduler);
}
}
if (info->flags & ASYNC_CTS_FLOW) {
if (info->tty->hw_stopped) {
if (status & UART_MSR_CTS) {
#if (defined(SERIAL_DEBUG_INTR) || defined(SERIAL_DEBUG_FLOW))
printk("CTS tx start...");
#endif
info->tty->hw_stopped = 0;
info->IER |= UART_IER_THRI;
serial_out(info, UART_IER, info->IER);
rs_sched_event(info, RS_EVENT_WRITE_WAKEUP);
return;
}
} else {
if (!(status & UART_MSR_CTS)) {
#if (defined(SERIAL_DEBUG_INTR) || defined(SERIAL_DEBUG_FLOW))
printk("CTS tx stop...");
#endif
info->tty->hw_stopped = 1;
info->IER &= ~UART_IER_THRI;
serial_out(info, UART_IER, info->IER);
}
}
}
}
#endif
/*
* This is the serial driver's interrupt routine for a single port
*/
/* static void rs_360_interrupt(void *dev_id) */ /* until and if we start servicing irqs here */
static void rs_360_interrupt(int vec, void *dev_id, struct pt_regs *fp)
{
u_char events;
int idx;
ser_info_t *info;
volatile struct smc_regs *smcp;
volatile struct scc_regs *sccp;
info = (ser_info_t *)dev_id;
idx = PORT_NUM(info->state->smc_scc_num);
if (info->state->smc_scc_num & NUM_IS_SCC) {
sccp = &pquicc->scc_regs[idx];
events = sccp->scc_scce;
if (events & SCCM_RX)
receive_chars(info);
if (events & SCCM_TX)
transmit_chars(info);
sccp->scc_scce = events;
} else {
smcp = &pquicc->smc_regs[idx];
events = smcp->smc_smce;
if (events & SMCM_BRKE)
receive_break(info);
if (events & SMCM_RX)
receive_chars(info);
if (events & SMCM_TX)
transmit_chars(info);
smcp->smc_smce = events;
}
#ifdef SERIAL_DEBUG_INTR
printk("rs_interrupt_single(%d, %x)...",
info->state->smc_scc_num, events);
#endif
#ifdef modem_control
check_modem_status(info);
#endif
info->last_active = jiffies;
#ifdef SERIAL_DEBUG_INTR
printk("end.\n");
#endif
}
/*
* -------------------------------------------------------------------
* Here ends the serial interrupt routines.
* -------------------------------------------------------------------
*/
/*
* This routine is used to handle the "bottom half" processing for the
* serial driver, known also the "software interrupt" processing.
* This processing is done at the kernel interrupt level, after the
* rs_interrupt() has returned, BUT WITH INTERRUPTS TURNED ON. This
* is where time-consuming activities which can not be done in the
* interrupt driver proper are done; the interrupt driver schedules
* them using rs_sched_event(), and they get done here.
*/
static void do_serial_bh(void)
{
run_task_queue(&tq_serial);
}
static void do_softint(void *private_)
{
ser_info_t *info = (ser_info_t *) private_;
struct tty_struct *tty;
tty = info->tty;
if (!tty)
return;
if (test_and_clear_bit(RS_EVENT_WRITE_WAKEUP, &info->event)) {
if ((tty->flags & (1 << TTY_DO_WRITE_WAKEUP)) &&
tty->ldisc.write_wakeup)
(tty->ldisc.write_wakeup)(tty);
wake_up_interruptible(&tty->write_wait);
}
}
/*
* This routine is called from the scheduler tqueue when the interrupt
* routine has signalled that a hangup has occurred. The path of
* hangup processing is:
*
* serial interrupt routine -> (scheduler tqueue) ->
* do_serial_hangup() -> tty->hangup() -> rs_hangup()
*
*/
static void do_serial_hangup(void *private_)
{
struct async_struct *info = (struct async_struct *) private_;
struct tty_struct *tty;
tty = info->tty;
if (!tty)
return;
tty_hangup(tty);
}
/*static void rs_360_timer(void)
{
printk("rs_360_timer\n");
}*/
static int startup(ser_info_t *info)
{
unsigned long flags;
int retval=0;
int idx;
/*struct serial_state *state = info->state;*/
volatile struct smc_regs *smcp;
volatile struct scc_regs *sccp;
volatile struct smc_uart_pram *up;
volatile struct uart_pram *scup;
local_irq_save(flags);
if (info->flags & ASYNC_INITIALIZED) {
goto errout;
}
#ifdef maybe
if (!state->port || !state->type) {
if (info->tty)
set_bit(TTY_IO_ERROR, &info->tty->flags);
goto errout;
}
#endif
#ifdef SERIAL_DEBUG_OPEN
printk("starting up ttys%d (irq %d)...", info->line, state->irq);
#endif
#ifdef modem_control
info->MCR = 0;
if (info->tty->termios->c_cflag & CBAUD)
info->MCR = UART_MCR_DTR | UART_MCR_RTS;
#endif
if (info->tty)
clear_bit(TTY_IO_ERROR, &info->tty->flags);
/*
* and set the speed of the serial port
*/
change_speed(info);
idx = PORT_NUM(info->state->smc_scc_num);
if (info->state->smc_scc_num & NUM_IS_SCC) {
sccp = &pquicc->scc_regs[idx];
scup = &pquicc->pram[info->state->port].scc.pscc.u;
scup->mrblr = RX_BUF_SIZE;
scup->max_idl = RX_BUF_SIZE;
sccp->scc_sccm |= (UART_SCCM_TX | UART_SCCM_RX);
sccp->scc_gsmr.w.low |= (SCC_GSMRL_ENR | SCC_GSMRL_ENT);
} else {
smcp = &pquicc->smc_regs[idx];
/* Enable interrupts and I/O.
*/
smcp->smc_smcm |= (SMCM_RX | SMCM_TX);
smcp->smc_smcmr |= (SMCMR_REN | SMCMR_TEN);
/* We can tune the buffer length and idle characters
* to take advantage of the entire incoming buffer size.
* If mrblr is something other than 1, maxidl has to be
* non-zero or we never get an interrupt. The maxidl
* is the number of character times we wait after reception
* of the last character before we decide no more characters
* are coming.
*/
/* up = (smc_uart_t *)&pquicc->cp_dparam[state->port]; */
/* holy unionized structures, Batman: */
up = &pquicc->pram[info->state->port].scc.pothers.idma_smc.psmc.u;
up->mrblr = RX_BUF_SIZE;
up->max_idl = RX_BUF_SIZE;
up->brkcr = 1; /* number of break chars */
}
info->flags |= ASYNC_INITIALIZED;
local_irq_restore(flags);
return 0;
errout:
local_irq_restore(flags);
return retval;
}
/*
* This routine will shutdown a serial port; interrupts are disabled, and
* DTR is dropped if the hangup on close termio flag is on.
*/
static void shutdown(ser_info_t *info)
{
unsigned long flags;
struct serial_state *state;
int idx;
volatile struct smc_regs *smcp;
volatile struct scc_regs *sccp;
if (!(info->flags & ASYNC_INITIALIZED))
return;
state = info->state;
#ifdef SERIAL_DEBUG_OPEN
printk("Shutting down serial port %d (irq %d)....", info->line,
state->irq);
#endif
local_irq_save(flags);
idx = PORT_NUM(state->smc_scc_num);
if (state->smc_scc_num & NUM_IS_SCC) {
sccp = &pquicc->scc_regs[idx];
sccp->scc_gsmr.w.low &= ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
#ifdef CONFIG_SERIAL_CONSOLE
/* We can't disable the transmitter if this is the
* system console.
*/
if ((state - rs_table) != CONFIG_SERIAL_CONSOLE_PORT)
#endif
sccp->scc_sccm &= ~(UART_SCCM_TX | UART_SCCM_RX);
} else {
smcp = &pquicc->smc_regs[idx];
/* Disable interrupts and I/O.
*/
smcp->smc_smcm &= ~(SMCM_RX | SMCM_TX);
#ifdef CONFIG_SERIAL_CONSOLE
/* We can't disable the transmitter if this is the
* system console.
*/
if ((state - rs_table) != CONFIG_SERIAL_CONSOLE_PORT)
#endif
smcp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
}
if (info->tty)
set_bit(TTY_IO_ERROR, &info->tty->flags);
info->flags &= ~ASYNC_INITIALIZED;
local_irq_restore(flags);
}
/*
* This routine is called to set the UART divisor registers to match
* the specified baud rate for a serial port.
*/
static void change_speed(ser_info_t *info)
{
int baud_rate;
unsigned cflag, cval, scval, prev_mode;
int i, bits, sbits, idx;
unsigned long flags;
struct serial_state *state;
volatile struct smc_regs *smcp;
volatile struct scc_regs *sccp;
if (!info->tty || !info->tty->termios)
return;
cflag = info->tty->termios->c_cflag;
state = info->state;
/* Character length programmed into the mode register is the
* sum of: 1 start bit, number of data bits, 0 or 1 parity bit,
* 1 or 2 stop bits, minus 1.
* The value 'bits' counts this for us.
*/
cval = 0;
scval = 0;
/* byte size and parity */
switch (cflag & CSIZE) {
case CS5: bits = 5; break;
case CS6: bits = 6; break;
case CS7: bits = 7; break;
case CS8: bits = 8; break;
/* Never happens, but GCC is too dumb to figure it out */
default: bits = 8; break;
}
sbits = bits - 5;
if (cflag & CSTOPB) {
cval |= SMCMR_SL; /* Two stops */
scval |= SCU_PMSR_SL;
bits++;
}
if (cflag & PARENB) {
cval |= SMCMR_PEN;
scval |= SCU_PMSR_PEN;
bits++;
}
if (!(cflag & PARODD)) {
cval |= SMCMR_PM_EVEN;
scval |= (SCU_PMSR_REVP | SCU_PMSR_TEVP);
}
/* Determine divisor based on baud rate */
i = cflag & CBAUD;
if (i >= (sizeof(baud_table)/sizeof(int)))
baud_rate = 9600;
else
baud_rate = baud_table[i];
info->timeout = (TX_BUF_SIZE*HZ*bits);
info->timeout += HZ/50; /* Add .02 seconds of slop */
#ifdef modem_control
/* CTS flow control flag and modem status interrupts */
info->IER &= ~UART_IER_MSI;
if (info->flags & ASYNC_HARDPPS_CD)
info->IER |= UART_IER_MSI;
if (cflag & CRTSCTS) {
info->flags |= ASYNC_CTS_FLOW;
info->IER |= UART_IER_MSI;
} else
info->flags &= ~ASYNC_CTS_FLOW;
if (cflag & CLOCAL)
info->flags &= ~ASYNC_CHECK_CD;
else {
info->flags |= ASYNC_CHECK_CD;
info->IER |= UART_IER_MSI;
}
serial_out(info, UART_IER, info->IER);
#endif
/*
* Set up parity check flag
*/
#define RELEVANT_IFLAG(iflag) (iflag & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK))
info->read_status_mask = (BD_SC_EMPTY | BD_SC_OV);
if (I_INPCK(info->tty))
info->read_status_mask |= BD_SC_FR | BD_SC_PR;
if (I_BRKINT(info->tty) || I_PARMRK(info->tty))
info->read_status_mask |= BD_SC_BR;
/*
* Characters to ignore
*/
info->ignore_status_mask = 0;
if (I_IGNPAR(info->tty))
info->ignore_status_mask |= BD_SC_PR | BD_SC_FR;
if (I_IGNBRK(info->tty)) {
info->ignore_status_mask |= BD_SC_BR;
/*
* If we're ignore parity and break indicators, ignore
* overruns too. (For real raw support).
*/
if (I_IGNPAR(info->tty))
info->ignore_status_mask |= BD_SC_OV;
}
/*
* !!! ignore all characters if CREAD is not set
*/
if ((cflag & CREAD) == 0)
info->read_status_mask &= ~BD_SC_EMPTY;
local_irq_save(flags);
/* Start bit has not been added (so don't, because we would just
* subtract it later), and we need to add one for the number of
* stops bits (there is always at least one).
*/
bits++;
idx = PORT_NUM(state->smc_scc_num);
if (state->smc_scc_num & NUM_IS_SCC) {
sccp = &pquicc->scc_regs[idx];
sccp->scc_psmr = (sbits << 12) | scval;
} else {
smcp = &pquicc->smc_regs[idx];
/* Set the mode register. We want to keep a copy of the
* enables, because we want to put them back if they were
* present.
*/
prev_mode = smcp->smc_smcmr;
smcp->smc_smcmr = smcr_mk_clen(bits) | cval | SMCMR_SM_UART;
smcp->smc_smcmr |= (prev_mode & (SMCMR_REN | SMCMR_TEN));
}
m360_cpm_setbrg((state - rs_table), baud_rate);
local_irq_restore(flags);
}
static void rs_360_put_char(struct tty_struct *tty, unsigned char ch)
{
ser_info_t *info = (ser_info_t *)tty->driver_data;
volatile QUICC_BD *bdp;
if (serial_paranoia_check(info, tty->device, "rs_put_char"))
return;
if (!tty)
return;
bdp = info->tx_cur;
while (bdp->status & BD_SC_READY);
/* *((char *)__va(bdp->buf)) = ch; */
*((char *)bdp->buf) = ch;
bdp->length = 1;
bdp->status |= BD_SC_READY;
/* Get next BD.
*/
if (bdp->status & BD_SC_WRAP)
bdp = info->tx_bd_base;
else
bdp++;
info->tx_cur = (QUICC_BD *)bdp;
}
static int rs_360_write(struct tty_struct * tty, int from_user,
const unsigned char *buf, int count)
{
int c, ret = 0;
ser_info_t *info = (ser_info_t *)tty->driver_data;
volatile QUICC_BD *bdp;
#ifdef CONFIG_KGDB
/* Try to let stub handle output. Returns true if it did. */
if (kgdb_output_string(buf, count))
return ret;
#endif
if (serial_paranoia_check(info, tty->device, "rs_write"))
return 0;
if (!tty)
return 0;
bdp = info->tx_cur;
while (1) {
c = min(count, TX_BUF_SIZE);
if (c <= 0)
break;
if (bdp->status & BD_SC_READY) {
info->flags |= TX_WAKEUP;
break;
}
if (from_user) {
if (copy_from_user((void *)bdp->buf, buf, c)) {
if (!ret)
ret = -EFAULT;
break;
}
} else {
/* memcpy(__va(bdp->buf), buf, c); */
memcpy((void *)bdp->buf, buf, c);
}
bdp->length = c;
bdp->status |= BD_SC_READY;
buf += c;
count -= c;
ret += c;
/* Get next BD.
*/
if (bdp->status & BD_SC_WRAP)
bdp = info->tx_bd_base;
else
bdp++;
info->tx_cur = (QUICC_BD *)bdp;
}
return ret;
}
static int rs_360_write_room(struct tty_struct *tty)
{
ser_info_t *info = (ser_info_t *)tty->driver_data;
int ret;
if (serial_paranoia_check(info, tty->device, "rs_write_room"))
return 0;
if ((info->tx_cur->status & BD_SC_READY) == 0) {
info->flags &= ~TX_WAKEUP;
ret = TX_BUF_SIZE;
}
else {
info->flags |= TX_WAKEUP;
ret = 0;
}
return ret;
}
/* I could track this with transmit counters....maybe later.
*/
static int rs_360_chars_in_buffer(struct tty_struct *tty)
{
ser_info_t *info = (ser_info_t *)tty->driver_data;
if (serial_paranoia_check(info, tty->device, "rs_chars_in_buffer"))
return 0;
return 0;
}
static void rs_360_flush_buffer(struct tty_struct *tty)
{
ser_info_t *info = (ser_info_t *)tty->driver_data;
if (serial_paranoia_check(info, tty->device, "rs_flush_buffer"))
return;
/* There is nothing to "flush", whatever we gave the CPM
* is on its way out.
*/
wake_up_interruptible(&tty->write_wait);
if ((tty->flags & (1 << TTY_DO_WRITE_WAKEUP)) &&
tty->ldisc.write_wakeup)
(tty->ldisc.write_wakeup)(tty);
info->flags &= ~TX_WAKEUP;
}
/*
* This function is used to send a high-priority XON/XOFF character to
* the device
*/
static void rs_360_send_xchar(struct tty_struct *tty, char ch)
{
volatile QUICC_BD *bdp;
ser_info_t *info = (ser_info_t *)tty->driver_data;
if (serial_paranoia_check(info, tty->device, "rs_send_char"))
return;
bdp = info->tx_cur;
while (bdp->status & BD_SC_READY);
/* *((char *)__va(bdp->buf)) = ch; */
*((char *)bdp->buf) = ch;
bdp->length = 1;
bdp->status |= BD_SC_READY;
/* Get next BD.
*/
if (bdp->status & BD_SC_WRAP)
bdp = info->tx_bd_base;
else
bdp++;
info->tx_cur = (QUICC_BD *)bdp;
}
/*
* ------------------------------------------------------------
* rs_throttle()
*
* This routine is called by the upper-layer tty layer to signal that
* incoming characters should be throttled.
* ------------------------------------------------------------
*/
static void rs_360_throttle(struct tty_struct * tty)
{
ser_info_t *info = (ser_info_t *)tty->driver_data;
#ifdef SERIAL_DEBUG_THROTTLE
char buf[64];
printk("throttle %s: %d....\n", _tty_name(tty, buf),
tty->ldisc.chars_in_buffer(tty));
#endif
if (serial_paranoia_check(info, tty->device, "rs_throttle"))
return;
if (I_IXOFF(tty))
rs_360_send_xchar(tty, STOP_CHAR(tty));
#ifdef modem_control
if (tty->termios->c_cflag & CRTSCTS)
info->MCR &= ~UART_MCR_RTS;
local_irq_disable();
serial_out(info, UART_MCR, info->MCR);
local_irq_enable();
#endif
}
static void rs_360_unthrottle(struct tty_struct * tty)
{
ser_info_t *info = (ser_info_t *)tty->driver_data;
#ifdef SERIAL_DEBUG_THROTTLE
char buf[64];
printk("unthrottle %s: %d....\n", _tty_name(tty, buf),
tty->ldisc.chars_in_buffer(tty));
#endif
if (serial_paranoia_check(info, tty->device, "rs_unthrottle"))
return;
if (I_IXOFF(tty)) {
if (info->x_char)
info->x_char = 0;
else
rs_360_send_xchar(tty, START_CHAR(tty));
}
#ifdef modem_control
if (tty->termios->c_cflag & CRTSCTS)
info->MCR |= UART_MCR_RTS;
local_irq_disable();
serial_out(info, UART_MCR, info->MCR);
local_irq_enable();
#endif
}
/*
* ------------------------------------------------------------
* rs_ioctl() and friends
* ------------------------------------------------------------
*/
#ifdef maybe
/*
* get_lsr_info - get line status register info
*
* Purpose: Let user call ioctl() to get info when the UART physically
* is emptied. On bus types like RS485, the transmitter must
* release the bus after transmitting. This must be done when
* the transmit shift register is empty, not be done when the
* transmit holding register is empty. This functionality
* allows an RS485 driver to be written in user space.
*/
static int get_lsr_info(struct async_struct * info, unsigned int *value)
{
unsigned char status;
unsigned int result;
local_irq_disable();
status = serial_in(info, UART_LSR);
local_irq_enable();
result = ((status & UART_LSR_TEMT) ? TIOCSER_TEMT : 0);
return put_user(result,value);
}
#endif
static int get_modem_info(ser_info_t *info, unsigned int *value)
{
unsigned int result = 0;
#ifdef modem_control
unsigned char control, status;
control = info->MCR;
local_irq_disable();
status = serial_in(info, UART_MSR);
local_irq_enable();
result = ((control & UART_MCR_RTS) ? TIOCM_RTS : 0)
| ((control & UART_MCR_DTR) ? TIOCM_DTR : 0)
#ifdef TIOCM_OUT1
| ((control & UART_MCR_OUT1) ? TIOCM_OUT1 : 0)
| ((control & UART_MCR_OUT2) ? TIOCM_OUT2 : 0)
#endif
| ((status & UART_MSR_DCD) ? TIOCM_CAR : 0)
| ((status & UART_MSR_RI) ? TIOCM_RNG : 0)
| ((status & UART_MSR_DSR) ? TIOCM_DSR : 0)
| ((status & UART_MSR_CTS) ? TIOCM_CTS : 0);
#endif
/* return put_user(result,value); */
put_user(result,value);
return (0);
}
static int set_modem_info(ser_info_t *info, unsigned int cmd,
unsigned int *value)
{
int error;
unsigned int arg;
error = get_user(arg,value);
if (error)
return error;
#ifdef modem_control
switch (cmd) {
case TIOCMBIS:
if (arg & TIOCM_RTS)
info->MCR |= UART_MCR_RTS;
if (arg & TIOCM_DTR)
info->MCR |= UART_MCR_DTR;
#ifdef TIOCM_OUT1
if (arg & TIOCM_OUT1)
info->MCR |= UART_MCR_OUT1;
if (arg & TIOCM_OUT2)
info->MCR |= UART_MCR_OUT2;
#endif
break;
case TIOCMBIC:
if (arg & TIOCM_RTS)
info->MCR &= ~UART_MCR_RTS;
if (arg & TIOCM_DTR)
info->MCR &= ~UART_MCR_DTR;
#ifdef TIOCM_OUT1
if (arg & TIOCM_OUT1)
info->MCR &= ~UART_MCR_OUT1;
if (arg & TIOCM_OUT2)
info->MCR &= ~UART_MCR_OUT2;
#endif
break;
case TIOCMSET:
info->MCR = ((info->MCR & ~(UART_MCR_RTS |
#ifdef TIOCM_OUT1
UART_MCR_OUT1 |
UART_MCR_OUT2 |
#endif
UART_MCR_DTR))
| ((arg & TIOCM_RTS) ? UART_MCR_RTS : 0)
#ifdef TIOCM_OUT1
| ((arg & TIOCM_OUT1) ? UART_MCR_OUT1 : 0)
| ((arg & TIOCM_OUT2) ? UART_MCR_OUT2 : 0)
#endif
| ((arg & TIOCM_DTR) ? UART_MCR_DTR : 0));
break;
default:
return -EINVAL;
}
local_irq_disable();
serial_out(info, UART_MCR, info->MCR);
local_irq_enable();
#endif
return 0;
}
/* Sending a break is a two step process on the SMC/SCC. It is accomplished
* by sending a STOP TRANSMIT command followed by a RESTART TRANSMIT
* command. We take advantage of the begin/end functions to make this
* happen.
*/
static ushort smc_chan_map[] = {
CPM_CR_CH_SMC1,
CPM_CR_CH_SMC2
};
static ushort scc_chan_map[] = {
CPM_CR_CH_SCC1,
CPM_CR_CH_SCC2,
CPM_CR_CH_SCC3,
CPM_CR_CH_SCC4
};
static void begin_break(ser_info_t *info)
{
volatile QUICC *cp;
ushort chan;
int idx;
cp = pquicc;
idx = PORT_NUM(info->state->smc_scc_num);
if (info->state->smc_scc_num & NUM_IS_SCC)
chan = scc_chan_map[idx];
else
chan = smc_chan_map[idx];
cp->cp_cr = mk_cr_cmd(chan, CPM_CR_STOP_TX) | CPM_CR_FLG;
while (cp->cp_cr & CPM_CR_FLG);
}
static void end_break(ser_info_t *info)
{
volatile QUICC *cp;
ushort chan;
int idx;
cp = pquicc;
idx = PORT_NUM(info->state->smc_scc_num);
if (info->state->smc_scc_num & NUM_IS_SCC)
chan = scc_chan_map[idx];
else
chan = smc_chan_map[idx];
cp->cp_cr = mk_cr_cmd(chan, CPM_CR_RESTART_TX) | CPM_CR_FLG;
while (cp->cp_cr & CPM_CR_FLG);
}
/*
* This routine sends a break character out the serial port.
*/
static void send_break(ser_info_t *info, int duration)
{
current->state = TASK_INTERRUPTIBLE;
#ifdef SERIAL_DEBUG_SEND_BREAK
printk("rs_send_break(%d) jiff=%lu...", duration, jiffies);
#endif
begin_break(info);
schedule_timeout(duration);
end_break(info);
#ifdef SERIAL_DEBUG_SEND_BREAK
printk("done jiffies=%lu\n", jiffies);
#endif
}
static int rs_360_ioctl(struct tty_struct *tty, struct file * file,
unsigned int cmd, unsigned long arg)
{
int error;
ser_info_t *info = (ser_info_t *)tty->driver_data;
int retval;
struct async_icount cnow;
/* struct async_icount_24 cnow;*/ /* kernel counter temps */
struct serial_icounter_struct *p_cuser; /* user space */
if (serial_paranoia_check(info, tty->device, "rs_ioctl"))
return -ENODEV;
if ((cmd != TIOCMIWAIT) && (cmd != TIOCGICOUNT)) {
if (tty->flags & (1 << TTY_IO_ERROR))
return -EIO;
}
switch (cmd) {
case TCSBRK: /* SVID version: non-zero arg --> no break */
retval = tty_check_change(tty);
if (retval)
return retval;
tty_wait_until_sent(tty, 0);
if (signal_pending(current))
return -EINTR;
if (!arg) {
send_break(info, HZ/4); /* 1/4 second */
if (signal_pending(current))
return -EINTR;
}
return 0;
case TCSBRKP: /* support for POSIX tcsendbreak() */
retval = tty_check_change(tty);
if (retval)
return retval;
tty_wait_until_sent(tty, 0);
if (signal_pending(current))
return -EINTR;
send_break(info, arg ? arg*(HZ/10) : HZ/4);
if (signal_pending(current))
return -EINTR;
return 0;
case TIOCSBRK:
retval = tty_check_change(tty);
if (retval)
return retval;
tty_wait_until_sent(tty, 0);
begin_break(info);
return 0;
case TIOCCBRK:
retval = tty_check_change(tty);
if (retval)
return retval;
end_break(info);
return 0;
case TIOCGSOFTCAR:
/* return put_user(C_CLOCAL(tty) ? 1 : 0, (int *) arg); */
put_user(C_CLOCAL(tty) ? 1 : 0, (int *) arg);
return 0;
case TIOCSSOFTCAR:
error = get_user(arg, (unsigned int *) arg);
if (error)
return error;
tty->termios->c_cflag =
((tty->termios->c_cflag & ~CLOCAL) |
(arg ? CLOCAL : 0));
return 0;
case TIOCMGET:
return get_modem_info(info, (unsigned int *) arg);
case TIOCMBIS:
case TIOCMBIC:
case TIOCMSET:
return set_modem_info(info, cmd, (unsigned int *) arg);
#ifdef maybe
case TIOCSERGETLSR: /* Get line status register */
return get_lsr_info(info, (unsigned int *) arg);
#endif
/*
* Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change
* - mask passed in arg for lines of interest
* (use |'ed TIOCM_RNG/DSR/CD/CTS for masking)
* Caller should use TIOCGICOUNT to see which one it was
*/
case TIOCMIWAIT:
#ifdef modem_control
local_irq_disable();
/* note the counters on entry */
cprev = info->state->icount;
local_irq_enable();
while (1) {
interruptible_sleep_on(&info->delta_msr_wait);
/* see if a signal did it */
if (signal_pending(current))
return -ERESTARTSYS;
local_irq_disable();
cnow = info->state->icount; /* atomic copy */
local_irq_enable();
if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
cnow.dcd == cprev.dcd && cnow.cts == cprev.cts)
return -EIO; /* no change => error */
if ( ((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) ||
((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) ||
((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) ||
((arg & TIOCM_CTS) && (cnow.cts != cprev.cts)) ) {
return 0;
}
cprev = cnow;
}
/* NOTREACHED */
#else
return 0;
#endif
/*
* Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
* Return: write counters to the user passed counter struct
* NB: both 1->0 and 0->1 transitions are counted except for
* RI where only 0->1 is counted.
*/
case TIOCGICOUNT:
local_irq_disable();
cnow = info->state->icount;
local_irq_enable();
p_cuser = (struct serial_icounter_struct *) arg;
/* error = put_user(cnow.cts, &p_cuser->cts); */
/* if (error) return error; */
/* error = put_user(cnow.dsr, &p_cuser->dsr); */
/* if (error) return error; */
/* error = put_user(cnow.rng, &p_cuser->rng); */
/* if (error) return error; */
/* error = put_user(cnow.dcd, &p_cuser->dcd); */
/* if (error) return error; */
put_user(cnow.cts, &p_cuser->cts);
put_user(cnow.dsr, &p_cuser->dsr);
put_user(cnow.rng, &p_cuser->rng);
put_user(cnow.dcd, &p_cuser->dcd);
return 0;
default:
return -ENOIOCTLCMD;
}
return 0;
}
/* FIX UP modem control here someday......
*/
static void rs_360_set_termios(struct tty_struct *tty, struct termios *old_termios)
{
ser_info_t *info = (ser_info_t *)tty->driver_data;
if ( (tty->termios->c_cflag == old_termios->c_cflag)
&& ( RELEVANT_IFLAG(tty->termios->c_iflag)
== RELEVANT_IFLAG(old_termios->c_iflag)))
return;
change_speed(info);
#ifdef modem_control
/* Handle transition to B0 status */
if ((old_termios->c_cflag & CBAUD) &&
!(tty->termios->c_cflag & CBAUD)) {
info->MCR &= ~(UART_MCR_DTR|UART_MCR_RTS);
local_irq_disable();
serial_out(info, UART_MCR, info->MCR);
local_irq_enable();
}
/* Handle transition away from B0 status */
if (!(old_termios->c_cflag & CBAUD) &&
(tty->termios->c_cflag & CBAUD)) {
info->MCR |= UART_MCR_DTR;
if (!tty->hw_stopped ||
!(tty->termios->c_cflag & CRTSCTS)) {
info->MCR |= UART_MCR_RTS;
}
local_irq_disable();
serial_out(info, UART_MCR, info->MCR);
local_irq_enable();
}
/* Handle turning off CRTSCTS */
if ((old_termios->c_cflag & CRTSCTS) &&
!(tty->termios->c_cflag & CRTSCTS)) {
tty->hw_stopped = 0;
rs_360_start(tty);
}
#endif
#if 0
/*
* No need to wake up processes in open wait, since they
* sample the CLOCAL flag once, and don't recheck it.
* XXX It's not clear whether the current behavior is correct
* or not. Hence, this may change.....
*/
if (!(old_termios->c_cflag & CLOCAL) &&
(tty->termios->c_cflag & CLOCAL))
wake_up_interruptible(&info->open_wait);
#endif
}
/*
* ------------------------------------------------------------
* rs_close()
*
* This routine is called when the serial port gets closed. First, we
* wait for the last remaining data to be sent. Then, we unlink its
* async structure from the interrupt chain if necessary, and we free
* that IRQ if nothing is left in the chain.
* ------------------------------------------------------------
*/
static void rs_360_close(struct tty_struct *tty, struct file * filp)
{
ser_info_t *info = (ser_info_t *)tty->driver_data;
/* struct async_state *state; */
struct serial_state *state;
unsigned long flags;
int idx;
volatile struct smc_regs *smcp;
volatile struct scc_regs *sccp;
if (!info || serial_paranoia_check(info, tty->device, "rs_close"))
return;
state = info->state;
local_irq_save(flags);
if (tty_hung_up_p(filp)) {
DBG_CNT("before DEC-hung");
MOD_DEC_USE_COUNT;
local_irq_restore(flags);
return;
}
#ifdef SERIAL_DEBUG_OPEN
printk("rs_close ttys%d, count = %d\n", info->line, state->count);
#endif
if ((tty->count == 1) && (state->count != 1)) {
/*
* Uh, oh. tty->count is 1, which means that the tty
* structure will be freed. state->count should always
* be one in these conditions. If it's greater than
* one, we've got real problems, since it means the
* serial port won't be shutdown.
*/
printk("rs_close: bad serial port count; tty->count is 1, "
"state->count is %d\n", state->count);
state->count = 1;
}
if (--state->count < 0) {
printk("rs_close: bad serial port count for ttys%d: %d\n",
info->line, state->count);
state->count = 0;
}
if (state->count) {
DBG_CNT("before DEC-2");
MOD_DEC_USE_COUNT;
local_irq_restore(flags);
return;
}
info->flags |= ASYNC_CLOSING;
/*
* Save the termios structure, since this port may have
* separate termios for callout and dialin.
*/
if (info->flags & ASYNC_NORMAL_ACTIVE)
info->state->normal_termios = *tty->termios;
if (info->flags & ASYNC_CALLOUT_ACTIVE)
info->state->callout_termios = *tty->termios;
/*
* Now we wait for the transmit buffer to clear; and we notify
* the line discipline to only process XON/XOFF characters.
*/
tty->closing = 1;
if (info->closing_wait != ASYNC_CLOSING_WAIT_NONE)
tty_wait_until_sent(tty, info->closing_wait);
/*
* At this point we stop accepting input. To do this, we
* disable the receive line status interrupts, and tell the
* interrupt driver to stop checking the data ready bit in the
* line status register.
*/
info->read_status_mask &= ~BD_SC_EMPTY;
if (info->flags & ASYNC_INITIALIZED) {
idx = PORT_NUM(info->state->smc_scc_num);
if (info->state->smc_scc_num & NUM_IS_SCC) {
sccp = &pquicc->scc_regs[idx];
sccp->scc_sccm &= ~UART_SCCM_RX;
sccp->scc_gsmr.w.low &= ~SCC_GSMRL_ENR;
} else {
smcp = &pquicc->smc_regs[idx];
smcp->smc_smcm &= ~SMCM_RX;
smcp->smc_smcmr &= ~SMCMR_REN;
}
/*
* Before we drop DTR, make sure the UART transmitter
* has completely drained; this is especially
* important if there is a transmit FIFO!
*/
rs_360_wait_until_sent(tty, info->timeout);
}
shutdown(info);
if (tty->driver.flush_buffer)
tty->driver.flush_buffer(tty);
if (tty->ldisc.flush_buffer)
tty->ldisc.flush_buffer(tty);
tty->closing = 0;
info->event = 0;
info->tty = 0;
if (info->blocked_open) {
if (info->close_delay) {
current->state = TASK_INTERRUPTIBLE;
schedule_timeout(info->close_delay);
}
wake_up_interruptible(&info->open_wait);
}
info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CALLOUT_ACTIVE|
ASYNC_CLOSING);
wake_up_interruptible(&info->close_wait);
MOD_DEC_USE_COUNT;
local_irq_restore(flags);
}
/*
* rs_wait_until_sent() --- wait until the transmitter is empty
*/
static void rs_360_wait_until_sent(struct tty_struct *tty, int timeout)
{
ser_info_t *info = (ser_info_t *)tty->driver_data;
unsigned long orig_jiffies, char_time;
/*int lsr;*/
volatile QUICC_BD *bdp;
if (serial_paranoia_check(info, tty->device, "rs_wait_until_sent"))
return;
#ifdef maybe
if (info->state->type == PORT_UNKNOWN)
return;
#endif
orig_jiffies = jiffies;
/*
* Set the check interval to be 1/5 of the estimated time to
* send a single character, and make it at least 1. The check
* interval should also be less than the timeout.
*
* Note: we have to use pretty tight timings here to satisfy
* the NIST-PCTS.
*/
char_time = 1;
if (timeout)
char_time = min(char_time, timeout);
#ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT
printk("In rs_wait_until_sent(%d) check=%lu...", timeout, char_time);
printk("jiff=%lu...", jiffies);
#endif
/* We go through the loop at least once because we can't tell
* exactly when the last character exits the shifter. There can
* be at least two characters waiting to be sent after the buffers
* are empty.
*/
do {
#ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT
printk("lsr = %d (jiff=%lu)...", lsr, jiffies);
#endif
current->state = TASK_INTERRUPTIBLE;
/* current->counter = 0; make us low-priority */
schedule_timeout(char_time);
if (signal_pending(current))
break;
if (timeout && ((orig_jiffies + timeout) < jiffies))
break;
/* The 'tx_cur' is really the next buffer to send. We
* have to back up to the previous BD and wait for it
* to go. This isn't perfect, because all this indicates
* is the buffer is available. There are still characters
* in the CPM FIFO.
*/
bdp = info->tx_cur;
if (bdp == info->tx_bd_base)
bdp += (TX_NUM_FIFO-1);
else
bdp--;
} while (bdp->status & BD_SC_READY);
current->state = TASK_RUNNING;
#ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT
printk("lsr = %d (jiff=%lu)...done\n", lsr, jiffies);
#endif
}
/*
* rs_hangup() --- called by tty_hangup() when a hangup is signaled.
*/
static void rs_360_hangup(struct tty_struct *tty)
{
ser_info_t *info = (ser_info_t *)tty->driver_data;
struct serial_state *state = info->state;
if (serial_paranoia_check(info, tty->device, "rs_hangup"))
return;
state = info->state;
rs_360_flush_buffer(tty);
shutdown(info);
info->event = 0;
state->count = 0;
info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CALLOUT_ACTIVE);
info->tty = 0;
wake_up_interruptible(&info->open_wait);
}
/*
* ------------------------------------------------------------
* rs_open() and friends
* ------------------------------------------------------------
*/
static int block_til_ready(struct tty_struct *tty, struct file * filp,
ser_info_t *info)
{
#ifdef DO_THIS_LATER
DECLARE_WAITQUEUE(wait, current);
#endif
struct serial_state *state = info->state;
int retval;
int do_clocal = 0;
/*
* If the device is in the middle of being closed, then block
* until it's done, and then try again.
*/
if (tty_hung_up_p(filp) ||
(info->flags & ASYNC_CLOSING)) {
if (info->flags & ASYNC_CLOSING)
interruptible_sleep_on(&info->close_wait);
#ifdef SERIAL_DO_RESTART
if (info->flags & ASYNC_HUP_NOTIFY)
return -EAGAIN;
else
return -ERESTARTSYS;
#else
return -EAGAIN;
#endif
}
#if 0 /* FIXME */
/*
* If this is a callout device, then just make sure the normal
* device isn't being used.
*/
if (tty->driver.subtype == SERIAL_TYPE_CALLOUT) {
if (info->flags & ASYNC_NORMAL_ACTIVE)
return -EBUSY;
if ((info->flags & ASYNC_CALLOUT_ACTIVE) &&
(info->flags & ASYNC_SESSION_LOCKOUT) &&
(info->session != current->session))
return -EBUSY;
if ((info->flags & ASYNC_CALLOUT_ACTIVE) &&
(info->flags & ASYNC_PGRP_LOCKOUT) &&
(info->pgrp != current->pgrp))
return -EBUSY;
info->flags |= ASYNC_CALLOUT_ACTIVE;
return 0;
}
#endif
/*
* If non-blocking mode is set, or the port is not enabled,
* then make the check up front and then exit.
* If this is an SMC port, we don't have modem control to wait
* for, so just get out here.
*/
if ((filp->f_flags & O_NONBLOCK) ||
(tty->flags & (1 << TTY_IO_ERROR)) ||
!(info->state->smc_scc_num & NUM_IS_SCC)) {
if (info->flags & ASYNC_CALLOUT_ACTIVE)
return -EBUSY;
info->flags |= ASYNC_NORMAL_ACTIVE;
return 0;
}
if (info->flags & ASYNC_CALLOUT_ACTIVE) {
if (state->normal_termios.c_cflag & CLOCAL)
do_clocal = 1;
} else {
if (tty->termios->c_cflag & CLOCAL)
do_clocal = 1;
}
/*
* Block waiting for the carrier detect and the line to become
* free (i.e., not in use by the callout). While we are in
* this loop, state->count is dropped by one, so that
* rs_close() knows when to free things. We restore it upon
* exit, either normal or abnormal.
*/
retval = 0;
#ifdef DO_THIS_LATER
add_wait_queue(&info->open_wait, &wait);
#ifdef SERIAL_DEBUG_OPEN
printk("block_til_ready before block: ttys%d, count = %d\n",
state->line, state->count);
#endif
local_irq_disable();
if (!tty_hung_up_p(filp))
state->count--;
local_irq_enable();
info->blocked_open++;
while (1) {
local_irq_disable();
if (!(info->flags & ASYNC_CALLOUT_ACTIVE) &&
(tty->termios->c_cflag & CBAUD))
serial_out(info, UART_MCR,
serial_inp(info, UART_MCR) |
(UART_MCR_DTR | UART_MCR_RTS));
local_irq_enable();
set_current_state(TASK_INTERRUPTIBLE);
if (tty_hung_up_p(filp) ||
!(info->flags & ASYNC_INITIALIZED)) {
#ifdef SERIAL_DO_RESTART
if (info->flags & ASYNC_HUP_NOTIFY)
retval = -EAGAIN;
else
retval = -ERESTARTSYS;
#else
retval = -EAGAIN;
#endif
break;
}
if (!(info->flags & ASYNC_CALLOUT_ACTIVE) &&
!(info->flags & ASYNC_CLOSING) &&
(do_clocal || (serial_in(info, UART_MSR) &
UART_MSR_DCD)))
break;
if (signal_pending(current)) {
retval = -ERESTARTSYS;
break;
}
#ifdef SERIAL_DEBUG_OPEN
printk("block_til_ready blocking: ttys%d, count = %d\n",
info->line, state->count);
#endif
schedule();
}
current->state = TASK_RUNNING;
remove_wait_queue(&info->open_wait, &wait);
if (!tty_hung_up_p(filp))
state->count++;
info->blocked_open--;
#ifdef SERIAL_DEBUG_OPEN
printk("block_til_ready after blocking: ttys%d, count = %d\n",
info->line, state->count);
#endif
#endif /* DO_THIS_LATER */
if (retval)
return retval;
info->flags |= ASYNC_NORMAL_ACTIVE;
return 0;
}
static int get_async_struct(int line, ser_info_t **ret_info)
{
struct serial_state *sstate;
sstate = rs_table + line;
if (sstate->info) {
sstate->count++;
*ret_info = (ser_info_t *)sstate->info;
return 0;
}
else {
return -ENOMEM;
}
}
/*
* This routine is called whenever a serial port is opened. It
* enables interrupts for a serial port, linking in its async structure into
* the IRQ chain. It also performs the serial-specific
* initialization for the tty structure.
*/
static int rs_360_open(struct tty_struct *tty, struct file * filp)
{
ser_info_t *info;
int retval, line;
line = MINOR(tty->device) - tty->driver.minor_start;
if ((line < 0) || (line >= NR_PORTS))
return -ENODEV;
retval = get_async_struct(line, &info);
if (retval)
return retval;
if (serial_paranoia_check(info, tty->device, "rs_open"))
return -ENODEV;
#ifdef SERIAL_DEBUG_OPEN
printk("rs_open %s%d, count = %d\n", tty->driver.name, info->line,
info->state->count);
#endif
tty->driver_data = info;
info->tty = tty;
/*
* Start up serial port
*/
retval = startup(info);
if (retval)
return retval;
MOD_INC_USE_COUNT;
retval = block_til_ready(tty, filp, info);
if (retval) {
#ifdef SERIAL_DEBUG_OPEN
printk("rs_open returning after block_til_ready with %d\n",
retval);
#endif
MOD_DEC_USE_COUNT;
return retval;
}
if ((info->state->count == 1) &&
(info->flags & ASYNC_SPLIT_TERMIOS)) {
if (tty->driver.subtype == SERIAL_TYPE_NORMAL)
*tty->termios = info->state->normal_termios;
else
*tty->termios = info->state->callout_termios;
change_speed(info);
}
info->session = current->session;
info->pgrp = current->pgrp;
#ifdef SERIAL_DEBUG_OPEN
printk("rs_open ttys%d successful...", info->line);
#endif
return 0;
}
/*
* /proc fs routines....
*/
static int inline line_info(char *buf, struct serial_state *state)
{
#ifdef notdef
struct async_struct *info = state->info, scr_info;
char stat_buf[30], control, status;
#endif
int ret;
ret = sprintf(buf, "%d: uart:%s port:%X irq:%d",
state->line,
(state->smc_scc_num & NUM_IS_SCC) ? "SCC" : "SMC",
(unsigned int)(state->port), state->irq);
if (!state->port || (state->type == PORT_UNKNOWN)) {
ret += sprintf(buf+ret, "\n");
return ret;
}
#ifdef notdef
/*
* Figure out the current RS-232 lines
*/
if (!info) {
info = &scr_info; /* This is just for serial_{in,out} */
info->magic = SERIAL_MAGIC;
info->port = state->port;
info->flags = state->flags;
info->quot = 0;
info->tty = 0;
}
local_irq_disable();
status = serial_in(info, UART_MSR);
control = info ? info->MCR : serial_in(info, UART_MCR);
local_irq_enable();
stat_buf[0] = 0;
stat_buf[1] = 0;
if (control & UART_MCR_RTS)
strcat(stat_buf, "|RTS");
if (status & UART_MSR_CTS)
strcat(stat_buf, "|CTS");
if (control & UART_MCR_DTR)
strcat(stat_buf, "|DTR");
if (status & UART_MSR_DSR)
strcat(stat_buf, "|DSR");
if (status & UART_MSR_DCD)
strcat(stat_buf, "|CD");
if (status & UART_MSR_RI)
strcat(stat_buf, "|RI");
if (info->quot) {
ret += sprintf(buf+ret, " baud:%d",
state->baud_base / info->quot);
}
ret += sprintf(buf+ret, " tx:%d rx:%d",
state->icount.tx, state->icount.rx);
if (state->icount.frame)
ret += sprintf(buf+ret, " fe:%d", state->icount.frame);
if (state->icount.parity)
ret += sprintf(buf+ret, " pe:%d", state->icount.parity);
if (state->icount.brk)
ret += sprintf(buf+ret, " brk:%d", state->icount.brk);
if (state->icount.overrun)
ret += sprintf(buf+ret, " oe:%d", state->icount.overrun);
/*
* Last thing is the RS-232 status lines
*/
ret += sprintf(buf+ret, " %s\n", stat_buf+1);
#endif
return ret;
}
int rs_360_read_proc(char *page, char **start, off_t off, int count,
int *eof, void *data)
{
int i, len = 0;
off_t begin = 0;
len += sprintf(page, "serinfo:1.0 driver:%s\n", serial_version);
for (i = 0; i < NR_PORTS && len < 4000; i++) {
len += line_info(page + len, &rs_table[i]);
if (len+begin > off+count)
goto done;
if (len+begin < off) {
begin += len;
len = 0;
}
}
*eof = 1;
done:
if (off >= len+begin)
return 0;
*start = page + (begin-off);
return ((count < begin+len-off) ? count : begin+len-off);
}
/*
* ---------------------------------------------------------------------
* rs_init() and friends
*
* rs_init() is called at boot-time to initialize the serial driver.
* ---------------------------------------------------------------------
*/
/*
* This routine prints out the appropriate serial driver version
* number, and identifies which options were configured into this
* driver.
*/
static _INLINE_ void show_serial_version(void)
{
printk(KERN_INFO "%s version %s\n", serial_name, serial_version);
}
/*
* The serial console driver used during boot. Note that these names
* clash with those found in "serial.c", so we currently can't support
* the 16xxx uarts and these at the same time. I will fix this to become
* an indirect function call from tty_io.c (or something).
*/
#ifdef CONFIG_SERIAL_CONSOLE
/*
* Print a string to the serial port trying not to disturb any possible
* real use of the port...
*/
static void my_console_write(int idx, const char *s,
unsigned count)
{
struct serial_state *ser;
ser_info_t *info;
unsigned i;
QUICC_BD *bdp, *bdbase;
volatile struct smc_uart_pram *up;
volatile u_char *cp;
ser = rs_table + idx;
/* If the port has been initialized for general use, we have
* to use the buffer descriptors allocated there. Otherwise,
* we simply use the single buffer allocated.
*/
if ((info = (ser_info_t *)ser->info) != NULL) {
bdp = info->tx_cur;
bdbase = info->tx_bd_base;
}
else {
/* Pointer to UART in parameter ram.
*/
/* up = (smc_uart_t *)&cpmp->cp_dparam[ser->port]; */
up = &pquicc->pram[ser->port].scc.pothers.idma_smc.psmc.u;
/* Get the address of the host memory buffer.
*/
bdp = bdbase = (QUICC_BD *)((uint)pquicc + (uint)up->tbase);
}
/*
* We need to gracefully shut down the transmitter, disable
* interrupts, then send our bytes out.
*/
/*
* Now, do each character. This is not as bad as it looks
* since this is a holding FIFO and not a transmitting FIFO.
* We could add the complexity of filling the entire transmit
* buffer, but we would just wait longer between accesses......
*/
for (i = 0; i < count; i++, s++) {
/* Wait for transmitter fifo to empty.
* Ready indicates output is ready, and xmt is doing
* that, not that it is ready for us to send.
*/
while (bdp->status & BD_SC_READY);
/* Send the character out.
*/
cp = bdp->buf;
*cp = *s;
bdp->length = 1;
bdp->status |= BD_SC_READY;
if (bdp->status & BD_SC_WRAP)
bdp = bdbase;
else
bdp++;
/* if a LF, also do CR... */
if (*s == 10) {
while (bdp->status & BD_SC_READY);
/* cp = __va(bdp->buf); */
cp = bdp->buf;
*cp = 13;
bdp->length = 1;
bdp->status |= BD_SC_READY;
if (bdp->status & BD_SC_WRAP) {
bdp = bdbase;
}
else {
bdp++;
}
}
}
/*
* Finally, Wait for transmitter & holding register to empty
* and restore the IER
*/
while (bdp->status & BD_SC_READY);
if (info)
info->tx_cur = (QUICC_BD *)bdp;
}
static void serial_console_write(struct console *c, const char *s,
unsigned count)
{
#ifdef CONFIG_KGDB
/* Try to let stub handle output. Returns true if it did. */
if (kgdb_output_string(s, count))
return;
#endif
my_console_write(c->index, s, count);
}
/*void console_print_68360(const char *p)
{
const char *cp = p;
int i;
for (i=0;cp[i]!=0;i++);
serial_console_write (p, i);
//Comment this if you want to have a strict interrupt-driven output
//rs_fair_output();
return;
}*/
#ifdef CONFIG_XMON
int
xmon_360_write(const char *s, unsigned count)
{
my_console_write(0, s, count);
return(count);
}
#endif
#ifdef CONFIG_KGDB
void
putDebugChar(char ch)
{
my_console_write(0, &ch, 1);
}
#endif
/*
* Receive character from the serial port. This only works well
* before the port is initialized for real use.
*/
static int my_console_wait_key(int idx, int xmon, char *obuf)
{
struct serial_state *ser;
u_char c, *cp;
ser_info_t *info;
QUICC_BD *bdp;
volatile struct smc_uart_pram *up;
int i;
ser = rs_table + idx;
/* Get the address of the host memory buffer.
* If the port has been initialized for general use, we must
* use information from the port structure.
*/
if ((info = (ser_info_t *)ser->info))
bdp = info->rx_cur;
else
/* bdp = (QUICC_BD *)&cpmp->cp_dpmem[up->smc_rbase]; */
bdp = (QUICC_BD *)((uint)pquicc + (uint)up->tbase);
/* Pointer to UART in parameter ram.
*/
/* up = (smc_uart_t *)&cpmp->cp_dparam[ser->port]; */
up = &pquicc->pram[info->state->port].scc.pothers.idma_smc.psmc.u;
/*
* We need to gracefully shut down the receiver, disable
* interrupts, then read the input.
* XMON just wants a poll. If no character, return -1, else
* return the character.
*/
if (!xmon) {
while (bdp->status & BD_SC_EMPTY);
}
else {
if (bdp->status & BD_SC_EMPTY)
return -1;
}
cp = (char *)bdp->buf;
if (obuf) {
i = c = bdp->length;
while (i-- > 0)
*obuf++ = *cp++;
}
else {
c = *cp;
}
bdp->status |= BD_SC_EMPTY;
if (info) {
if (bdp->status & BD_SC_WRAP) {
bdp = info->rx_bd_base;
}
else {
bdp++;
}
info->rx_cur = (QUICC_BD *)bdp;
}
return((int)c);
}
static int serial_console_wait_key(struct console *co)
{
return(my_console_wait_key(co->index, 0, NULL));
}
#ifdef CONFIG_XMON
int
xmon_360_read_poll(void)
{
return(my_console_wait_key(0, 1, NULL));
}
int
xmon_360_read_char(void)
{
return(my_console_wait_key(0, 0, NULL));
}
#endif
#ifdef CONFIG_KGDB
static char kgdb_buf[RX_BUF_SIZE], *kgdp;
static int kgdb_chars;
unsigned char
getDebugChar(void)
{
if (kgdb_chars <= 0) {
kgdb_chars = my_console_wait_key(0, 0, kgdb_buf);
kgdp = kgdb_buf;
}
kgdb_chars--;
return(*kgdp++);
}
void kgdb_interruptible(int state)
{
}
void kgdb_map_scc(void)
{
struct serial_state *ser;
uint mem_addr;
volatile QUICC_BD *bdp;
volatile smc_uart_t *up;
cpmp = (cpm360_t *)&(((immap_t *)IMAP_ADDR)->im_cpm);
/* To avoid data cache CPM DMA coherency problems, allocate a
* buffer in the CPM DPRAM. This will work until the CPM and
* serial ports are initialized. At that time a memory buffer
* will be allocated.
* The port is already initialized from the boot procedure, all
* we do here is give it a different buffer and make it a FIFO.
*/
ser = rs_table;
/* Right now, assume we are using SMCs.
*/
up = (smc_uart_t *)&cpmp->cp_dparam[ser->port];
/* Allocate space for an input FIFO, plus a few bytes for output.
* Allocate bytes to maintain word alignment.
*/
mem_addr = (uint)(&cpmp->cp_dpmem[0x1000]);
/* Set the physical address of the host memory buffers in
* the buffer descriptors.
*/
bdp = (QUICC_BD *)&cpmp->cp_dpmem[up->smc_rbase];
bdp->buf = mem_addr;
bdp = (QUICC_BD *)&cpmp->cp_dpmem[up->smc_tbase];
bdp->buf = mem_addr+RX_BUF_SIZE;
up->smc_mrblr = RX_BUF_SIZE; /* receive buffer length */
up->smc_maxidl = RX_BUF_SIZE;
}
#endif
static kdev_t serial_console_device(struct console *c)
{
return MKDEV(TTY_MAJOR, 64 + c->index);
}
struct console sercons = {
name: "ttyS",
write: serial_console_write,
device: serial_console_device,
wait_key: serial_console_wait_key,
setup: serial_console_setup,
flags: CON_PRINTBUFFER,
index: CONFIG_SERIAL_CONSOLE_PORT,
};
/*
* Register console.
*/
long console_360_init(long kmem_start, long kmem_end)
{
register_console(&sercons);
/*register_console (console_print_68360); - 2.0.38 only required a write
function pointer. */
return kmem_start;
}
#endif
/* Index in baud rate table of the default console baud rate.
*/
static int baud_idx;
/* int __init rs_360_init(void) */
int rs_360_init(void)
{
struct serial_state * state;
ser_info_t *info;
void *mem_addr;
uint dp_addr, iobits;
int i, j, idx;
ushort chan;
QUICC_BD *bdp;
volatile QUICC *cp;
volatile struct smc_regs *sp;
volatile struct smc_uart_pram *up;
volatile struct scc_regs *scp;
volatile struct uart_pram *sup;
/* volatile immap_t *immap; */
init_bh(SERIAL_BH, do_serial_bh);
show_serial_version();
/* Initialize the tty_driver structure */
/* __clear_user(&serial_driver,sizeof(struct tty_driver)); */
memset(&serial_driver, 0, sizeof(struct tty_driver));
serial_driver.magic = TTY_DRIVER_MAGIC;
/* serial_driver.driver_name = "serial"; */
serial_driver.name = "ttyS";
serial_driver.major = TTY_MAJOR;
serial_driver.minor_start = 64;
serial_driver.num = NR_PORTS;
serial_driver.type = TTY_DRIVER_TYPE_SERIAL;
serial_driver.subtype = SERIAL_TYPE_NORMAL;
serial_driver.init_termios = tty_std_termios;
serial_driver.init_termios.c_cflag =
baud_idx | CS8 | CREAD | HUPCL | CLOCAL;
serial_driver.flags = TTY_DRIVER_REAL_RAW;
serial_driver.refcount = &serial_refcount;
serial_driver.table = serial_table;
serial_driver.termios = serial_termios;
serial_driver.termios_locked = serial_termios_locked;
serial_driver.open = rs_360_open;
serial_driver.close = rs_360_close;
serial_driver.write = rs_360_write;
serial_driver.put_char = rs_360_put_char;
serial_driver.write_room = rs_360_write_room;
serial_driver.chars_in_buffer = rs_360_chars_in_buffer;
serial_driver.flush_buffer = rs_360_flush_buffer;
serial_driver.ioctl = rs_360_ioctl;
serial_driver.throttle = rs_360_throttle;
serial_driver.unthrottle = rs_360_unthrottle;
/* serial_driver.send_xchar = rs_360_send_xchar; */
serial_driver.set_termios = rs_360_set_termios;
serial_driver.stop = rs_360_stop;
serial_driver.start = rs_360_start;
serial_driver.hangup = rs_360_hangup;
/* serial_driver.wait_until_sent = rs_360_wait_until_sent; */
/* serial_driver.read_proc = rs_360_read_proc; */
/*
* The callout device is just like normal device except for
* major number and the subtype code.
*/
callout_driver = serial_driver;
callout_driver.name = "cua";
callout_driver.major = TTYAUX_MAJOR;
callout_driver.subtype = SERIAL_TYPE_CALLOUT;
/* callout_driver.read_proc = 0; */
/* callout_driver.proc_entry = 0; */
if (tty_register_driver(&serial_driver))
panic("Couldn't register serial driver\n");
if (tty_register_driver(&callout_driver))
panic("Couldn't register callout driver\n");
cp = pquicc; /* Get pointer to Communication Processor */
/* immap = (immap_t *)IMAP_ADDR; */ /* and to internal registers */
/* Configure SCC2, SCC3, and SCC4 instead of port A parallel I/O.
*/
/* The "standard" configuration through the 860.
*/
/* immap->im_ioport.iop_papar |= 0x00fc; */
/* immap->im_ioport.iop_padir &= ~0x00fc; */
/* immap->im_ioport.iop_paodr &= ~0x00fc; */
cp->pio_papar |= 0x00fc;
cp->pio_padir &= ~0x00fc;
/* cp->pio_paodr &= ~0x00fc; */
/* Since we don't yet do modem control, connect the port C pins
* as general purpose I/O. This will assert CTS and CD for the
* SCC ports.
*/
/* FIXME: see 360um p.7-365 and 860um p.34-12
* I can't make sense of these bits - mleslie*/
/* immap->im_ioport.iop_pcdir |= 0x03c6; */
/* immap->im_ioport.iop_pcpar &= ~0x03c6; */
/* cp->pio_pcdir |= 0x03c6; */
/* cp->pio_pcpar &= ~0x03c6; */
/* Connect SCC2 and SCC3 to NMSI. Connect BRG3 to SCC2 and
* BRG4 to SCC3.
*/
cp->si_sicr &= ~0x00ffff00;
cp->si_sicr |= 0x001b1200;
#ifdef CONFIG_PP04
/* Frequentis PP04 forced to RS-232 until we know better.
* Port C 12 and 13 low enables RS-232 on SCC3 and SCC4.
*/
immap->im_ioport.iop_pcdir |= 0x000c;
immap->im_ioport.iop_pcpar &= ~0x000c;
immap->im_ioport.iop_pcdat &= ~0x000c;
/* This enables the TX driver.
*/
cp->cp_pbpar &= ~0x6000;
cp->cp_pbdat &= ~0x6000;
#endif
for (i = 0, state = rs_table; i < NR_PORTS; i++,state++) {
state->magic = SSTATE_MAGIC;
state->line = i;
state->type = PORT_UNKNOWN;
state->custom_divisor = 0;
state->close_delay = 5*HZ/10;
state->closing_wait = 30*HZ;
state->callout_termios = callout_driver.init_termios;
state->normal_termios = serial_driver.init_termios;
state->icount.cts = state->icount.dsr =
state->icount.rng = state->icount.dcd = 0;
state->icount.rx = state->icount.tx = 0;
state->icount.frame = state->icount.parity = 0;
state->icount.overrun = state->icount.brk = 0;
printk(KERN_INFO "ttyS%02d at irq 0x%02x is an %s\n",
i, (unsigned int)(state->irq),
(state->smc_scc_num & NUM_IS_SCC) ? "SCC" : "SMC");
#ifdef CONFIG_SERIAL_CONSOLE
/* If we just printed the message on the console port, and
* we are about to initialize it for general use, we have
* to wait a couple of character times for the CR/NL to
* make it out of the transmit buffer.
*/
if (i == CONFIG_SERIAL_CONSOLE_PORT)
mdelay(8);
/* idx = PORT_NUM(info->state->smc_scc_num); */
/* if (info->state->smc_scc_num & NUM_IS_SCC) */
/* chan = scc_chan_map[idx]; */
/* else */
/* chan = smc_chan_map[idx]; */
/* cp->cp_cr = mk_cr_cmd(chan, CPM_CR_STOP_TX) | CPM_CR_FLG; */
/* while (cp->cp_cr & CPM_CR_FLG); */
#endif
/* info = kmalloc(sizeof(ser_info_t), GFP_KERNEL); */
info = &quicc_ser_info[i];
if (info) {
/* __clear_user(info,sizeof(ser_info_t)); */
memset (info, 0, sizeof(ser_info_t));
init_waitqueue_head(&info->open_wait);
init_waitqueue_head(&info->close_wait);
info->magic = SERIAL_MAGIC;
info->flags = state->flags;
info->tqueue.routine = do_softint;
info->tqueue.data = info;
info->tqueue_hangup.routine = do_serial_hangup;
info->tqueue_hangup.data = info;
info->line = i;
info->state = state;
state->info = (struct async_struct *)info;
/* We need to allocate a transmit and receive buffer
* descriptors from dual port ram, and a character
* buffer area from host mem.
*/
dp_addr = m360_cpm_dpalloc(sizeof(QUICC_BD) * RX_NUM_FIFO);
/* Allocate space for FIFOs in the host memory.
* (for now this is from a static array of buffers :(
*/
/* mem_addr = m360_cpm_hostalloc(RX_NUM_FIFO * RX_BUF_SIZE); */
/* mem_addr = kmalloc (RX_NUM_FIFO * RX_BUF_SIZE, GFP_BUFFER); */
mem_addr = &rx_buf_pool[i * RX_NUM_FIFO * RX_BUF_SIZE];
/* Set the physical address of the host memory
* buffers in the buffer descriptors, and the
* virtual address for us to work with.
*/
bdp = (QUICC_BD *)((uint)pquicc + dp_addr);
info->rx_cur = info->rx_bd_base = bdp;
/* initialize rx buffer descriptors */
for (j=0; j<(RX_NUM_FIFO-1); j++) {
bdp->buf = &rx_buf_pool[(i * RX_NUM_FIFO + j ) * RX_BUF_SIZE];
bdp->status = BD_SC_EMPTY | BD_SC_INTRPT;
mem_addr += RX_BUF_SIZE;
bdp++;
}
bdp->buf = &rx_buf_pool[(i * RX_NUM_FIFO + j ) * RX_BUF_SIZE];
bdp->status = BD_SC_WRAP | BD_SC_EMPTY | BD_SC_INTRPT;
idx = PORT_NUM(info->state->smc_scc_num);
if (info->state->smc_scc_num & NUM_IS_SCC) {
#if defined (CONFIG_UCQUICC) && 1
/* set the transceiver mode to RS232 */
sipex_mode_bits &= ~(uint)SIPEX_MODE(idx,0x0f); /* clear current mode */
sipex_mode_bits |= (uint)SIPEX_MODE(idx,0x02);
*(uint *)_periph_base = sipex_mode_bits;
/* printk ("sipex bits = 0x%08x\n", sipex_mode_bits); */
#endif
scp = &pquicc->scc_regs[idx];
sup = &pquicc->pram[info->state->port].scc.pscc.u;
sup->rbase = dp_addr;
}
else {
sp = &cp->smc_regs[idx];
up = &pquicc->pram[info->state->port].scc.pothers.idma_smc.psmc.u;
up->rbase = dp_addr;
}
dp_addr = m360_cpm_dpalloc(sizeof(QUICC_BD) * TX_NUM_FIFO);
/* Allocate space for FIFOs in the host memory.
*/
/* mem_addr = m360_cpm_hostalloc(TX_NUM_FIFO * TX_BUF_SIZE); */
/* mem_addr = kmalloc (TX_NUM_FIFO * TX_BUF_SIZE, GFP_BUFFER); */
mem_addr = &tx_buf_pool[i * TX_NUM_FIFO * TX_BUF_SIZE];
/* Set the physical address of the host memory
* buffers in the buffer descriptors, and the
* virtual address for us to work with.
*/
/* bdp = (QUICC_BD *)&cp->cp_dpmem[dp_addr]; */
bdp = (QUICC_BD *)((uint)pquicc + dp_addr);
info->tx_cur = info->tx_bd_base = (QUICC_BD *)bdp;
/* initialize tx buffer descriptors */
for (j=0; j<(TX_NUM_FIFO-1); j++) {
bdp->buf = &tx_buf_pool[(i * TX_NUM_FIFO + j ) * TX_BUF_SIZE];
bdp->status = BD_SC_INTRPT;
mem_addr += TX_BUF_SIZE;
bdp++;
}
bdp->buf = &tx_buf_pool[(i * TX_NUM_FIFO + j ) * TX_BUF_SIZE];
bdp->status = (BD_SC_WRAP | BD_SC_INTRPT);
if (info->state->smc_scc_num & NUM_IS_SCC) {
sup->tbase = dp_addr;
/* Set up the uart parameters in the
* parameter ram.
*/
sup->rfcr = SMC_EB;
sup->tfcr = SMC_EB;
/* Set this to 1 for now, so we get single
* character interrupts. Using idle charater
* time requires some additional tuning.
*/
sup->mrblr = 1;
sup->max_idl = 0;
sup->brkcr = 1;
sup->parec = 0;
sup->frmer = 0;
sup->nosec = 0;
sup->brkec = 0;
sup->uaddr1 = 0;
sup->uaddr2 = 0;
sup->toseq = 0;
{
int i;
for (i=0;i<8;i++)
sup->cc[i] = 0x8000;
}
sup->rccm = 0xc0ff;
/* Send the CPM an initialize command.
*/
chan = scc_chan_map[idx];
/* execute the INIT RX & TX PARAMS command for this channel. */
cp->cp_cr = mk_cr_cmd(chan, CPM_CR_INIT_TRX) | CPM_CR_FLG;
while (cp->cp_cr & CPM_CR_FLG);
/* Set UART mode, 8 bit, no parity, one stop.
* Enable receive and transmit.
*/
scp->scc_gsmr.w.high = 0;
scp->scc_gsmr.w.low =
(SCC_GSMRL_MODE_UART | SCC_GSMRL_TDCR_16 | SCC_GSMRL_RDCR_16);
/* Disable all interrupts and clear all pending
* events.
*/
scp->scc_sccm = 0;
scp->scc_scce = 0xffff;
scp->scc_dsr = 0x7e7e;
scp->scc_psmr = 0x3000;
/* If the port is the console, enable Rx and Tx.
*/
#ifdef CONFIG_SERIAL_CONSOLE
if (i == CONFIG_SERIAL_CONSOLE_PORT)
scp->scc_gsmr.w.low |= (SCC_GSMRL_ENR | SCC_GSMRL_ENT);
#endif
}
else {
/* Configure SMCs Tx/Rx instead of port B
* parallel I/O.
*/
iobits = 0xc0 << (idx * 4);
cp->pip_pbpar |= iobits;
cp->pip_pbdir &= ~iobits;
cp->pip_pbodr &= ~iobits;
/* Connect the baud rate generator to the
* SMC based upon index in rs_table. Also
* make sure it is connected to NMSI.
*/
cp->si_simode &= ~(0xffff << (idx * 16));
cp->si_simode |= (i << ((idx * 16) + 12));
up->tbase = dp_addr;
/* Set up the uart parameters in the
* parameter ram.
*/
up->rfcr = SMC_EB;
up->tfcr = SMC_EB;
/* Set this to 1 for now, so we get single
* character interrupts. Using idle charater
* time requires some additional tuning.
*/
up->mrblr = 1;
up->max_idl = 0;
up->brkcr = 1;
/* Send the CPM an initialize command.
*/
chan = smc_chan_map[idx];
cp->cp_cr = mk_cr_cmd(chan,
CPM_CR_INIT_TRX) | CPM_CR_FLG;
#ifdef CONFIG_SERIAL_CONSOLE
if (i == CONFIG_SERIAL_CONSOLE_PORT)
printk("");
#endif
while (cp->cp_cr & CPM_CR_FLG);
/* Set UART mode, 8 bit, no parity, one stop.
* Enable receive and transmit.
*/
sp->smc_smcmr = smcr_mk_clen(9) | SMCMR_SM_UART;
/* Disable all interrupts and clear all pending
* events.
*/
sp->smc_smcm = 0;
sp->smc_smce = 0xff;
/* If the port is the console, enable Rx and Tx.
*/
#ifdef CONFIG_SERIAL_CONSOLE
if (i == CONFIG_SERIAL_CONSOLE_PORT)
sp->smc_smcmr |= SMCMR_REN | SMCMR_TEN;
#endif
}
/* Install interrupt handler.
*/
/* cpm_install_handler(IRQ_MACHSPEC | state->irq, rs_360_interrupt, info); */
/*request_irq(IRQ_MACHSPEC | state->irq, rs_360_interrupt, */
request_irq(state->irq, rs_360_interrupt,
IRQ_FLG_LOCK, serial_driver.name, (void *)info);
/* Set up the baud rate generator.
*/
m360_cpm_setbrg(i, baud_table[baud_idx]);
}
}
return 0;
}
/* This must always be called before the rs_360_init() function, otherwise
* it blows away the port control information.
*/
//static int __init serial_console_setup( struct console *co, char *options)
int serial_console_setup( struct console *co, char *options)
{
struct serial_state *ser;
uint mem_addr, dp_addr, bidx, idx, iobits;
int i;
ushort chan;
QUICC_BD *bdp;
volatile QUICC *cp;
volatile struct smc_regs *sp;
volatile struct scc_regs *scp;
volatile struct smc_uart_pram *up;
volatile struct uart_pram *sup;
/* mleslie TODO:
* add something to the 68k bootloader to store a desired initial console baud rate */
/* bd_t *bd; */ /* a board info struct used by EPPC-bug */
/* bd = (bd_t *)__res; */
for (bidx = 0; bidx < (sizeof(baud_table) / sizeof(int)); bidx++)
/* if (bd->bi_baudrate == baud_table[bidx]) */
if (CONSOLE_BAUDRATE == baud_table[bidx])
break;
/* co->cflag = CREAD|CLOCAL|bidx|CS8; */
baud_idx = bidx;
ser = rs_table + CONFIG_SERIAL_CONSOLE_PORT;
cp = pquicc; /* Get pointer to Communication Processor */
idx = PORT_NUM(ser->smc_scc_num);
if (ser->smc_scc_num & NUM_IS_SCC) {
scp = &cp->scc_regs[idx];
/* sup = (scc_uart_t *)&cp->cp_dparam[ser->port]; */
sup = &pquicc->pram[ser->port].scc.pscc.u;
/* TODO: need to set up SCC pin assignment etc. here */
}
else {
sp = &cp->smc_regs[idx];
/* up = (smc_uart_t *)&cp->cp_dparam[ser->port]; */
up = &pquicc->pram[ser->port].scc.pothers.idma_smc.psmc.u;
iobits = 0xc0 << (idx * 4);
cp->pip_pbpar |= iobits;
cp->pip_pbdir &= ~iobits;
cp->pip_pbodr &= ~iobits;
/* Connect the baud rate generator to the
* SMC based upon index in rs_table. Also
* make sure it is connected to NMSI.
*/
cp->si_simode &= ~(0xffff << (idx * 16));
cp->si_simode |= (idx << ((idx * 16) + 12));
}
/* When we get here, the CPM has been reset, so we need
* to configure the port.
* We need to allocate a transmit and receive buffer descriptor
* from dual port ram, and a character buffer area from host mem.
*/
/* Allocate space for two buffer descriptors in the DP ram.
*/
dp_addr = m360_cpm_dpalloc(sizeof(QUICC_BD) * CONSOLE_NUM_FIFO);
/* Allocate space for two 2 byte FIFOs in the host memory.
*/
/* mem_addr = m360_cpm_hostalloc(8); */
mem_addr = (uint)console_fifos;
/* Set the physical address of the host memory buffers in
* the buffer descriptors.
*/
/* bdp = (QUICC_BD *)&cp->cp_dpmem[dp_addr]; */
bdp = (QUICC_BD *)((uint)pquicc + dp_addr);
bdp->buf = (char *)mem_addr;
(bdp+1)->buf = (char *)(mem_addr+4);
/* For the receive, set empty and wrap.
* For transmit, set wrap.
*/
bdp->status = BD_SC_EMPTY | BD_SC_WRAP;
(bdp+1)->status = BD_SC_WRAP;
/* Set up the uart parameters in the parameter ram.
*/
if (ser->smc_scc_num & NUM_IS_SCC) {
sup->rbase = dp_addr;
sup->tbase = dp_addr + sizeof(QUICC_BD);
/* Set up the uart parameters in the
* parameter ram.
*/
sup->rfcr = SMC_EB;
sup->tfcr = SMC_EB;
/* Set this to 1 for now, so we get single
* character interrupts. Using idle charater
* time requires some additional tuning.
*/
sup->mrblr = 1;
sup->max_idl = 0;
sup->brkcr = 1;
sup->parec = 0;
sup->frmer = 0;
sup->nosec = 0;
sup->brkec = 0;
sup->uaddr1 = 0;
sup->uaddr2 = 0;
sup->toseq = 0;
{
int i;
for (i=0;i<8;i++)
sup->cc[i] = 0x8000;
}
sup->rccm = 0xc0ff;
/* Send the CPM an initialize command.
*/
chan = scc_chan_map[idx];
cp->cp_cr = mk_cr_cmd(chan, CPM_CR_INIT_TRX) | CPM_CR_FLG;
while (cp->cp_cr & CPM_CR_FLG);
/* Set UART mode, 8 bit, no parity, one stop.
* Enable receive and transmit.
*/
scp->scc_gsmr.w.high = 0;
scp->scc_gsmr.w.low =
(SCC_GSMRL_MODE_UART | SCC_GSMRL_TDCR_16 | SCC_GSMRL_RDCR_16);
/* Disable all interrupts and clear all pending
* events.
*/
scp->scc_sccm = 0;
scp->scc_scce = 0xffff;
scp->scc_dsr = 0x7e7e;
scp->scc_psmr = 0x3000;
scp->scc_gsmr.w.low |= (SCC_GSMRL_ENR | SCC_GSMRL_ENT);
}
else {
up->rbase = dp_addr; /* Base of receive buffer desc. */
up->tbase = dp_addr+sizeof(QUICC_BD); /* Base of xmt buffer desc. */
up->rfcr = SMC_EB;
up->tfcr = SMC_EB;
/* Set this to 1 for now, so we get single character interrupts.
*/
up->mrblr = 1; /* receive buffer length */
up->max_idl = 0; /* wait forever for next char */
/* Send the CPM an initialize command.
*/
chan = smc_chan_map[idx];
cp->cp_cr = mk_cr_cmd(chan, CPM_CR_INIT_TRX) | CPM_CR_FLG;
printk("");
while (cp->cp_cr & CPM_CR_FLG);
/* Set UART mode, 8 bit, no parity, one stop.
* Enable receive and transmit.
*/
sp->smc_smcmr = smcr_mk_clen(9) | SMCMR_SM_UART;
/* And finally, enable Rx and Tx.
*/
sp->smc_smcmr |= SMCMR_REN | SMCMR_TEN;
}
/* Set up the baud rate generator.
*/
/* m360_cpm_setbrg((ser - rs_table), bd->bi_baudrate); */
m360_cpm_setbrg((ser - rs_table), CONSOLE_BAUDRATE);
return 0;
}
/*
* Local variables:
* c-indent-level: 4
* c-basic-offset: 4
* tab-width: 4
* End:
*/
drivers/serial/Kconfig
View file @ 07834925
......@@ -325,15 +325,58 @@ config SERIAL_SUNSAB
(PCI) UltraSPARC systems. Say Y or M if you want to be able to these
serial ports.
config V850E_NB85E_UART
bool "NEC V850E on-chip UART support"
depends on V850E_NB85E || V850E2_ANNA
default y
config V850E_NB85E_UART_CONSOLE
bool "Use NEC V850E on-chip UART for console"
depends on V850E_NB85E_UART
config SERIAL_CORE
tristate
default m if SERIAL_AMBA!=y && SERIAL_CLPS711X!=y && SERIAL_21285!=y && !SERIAL_SA1100 && !SERIAL_ANAKIN && !SERIAL_UART00 && SERIAL_8250!=y && !SERIAL_ROCKETPORT && !SERIAL_SUNCORE && (SERIAL_AMBA=m || SERIAL_CLPS711X=m || SERIAL_21285=m || SERIAL_8250=m)
default y if SERIAL_AMBA=y || SERIAL_CLPS711X=y || SERIAL_21285=y || SERIAL_SA1100 || SERIAL_ANAKIN || SERIAL_UART00 || SERIAL_8250=y || SERIAL_ROCKETPORT || SERIAL_SUNCORE
default m if SERIAL_AMBA!=y && SERIAL_CLPS711X!=y && SERIAL_21285!=y && !SERIAL_SA1100 && !SERIAL_ANAKIN && !SERIAL_UART00 && SERIAL_8250!=y && !SERIAL_ROCKETPORT && !SERIAL_SUNCORE && !V850E_NB85E_UART && (SERIAL_AMBA=m || SERIAL_CLPS711X=m || SERIAL_21285=m || SERIAL_8250=m)
default y if SERIAL_AMBA=y || SERIAL_CLPS711X=y || SERIAL_21285=y || SERIAL_SA1100 || SERIAL_ANAKIN || SERIAL_UART00 || SERIAL_8250=y || SERIAL_ROCKETPORT || SERIAL_SUNCORE || V850E_NB85E_UART
config SERIAL_CORE_CONSOLE
bool
depends on SERIAL_AMBA_CONSOLE || SERIAL_CLPS711X_CONSOLE || SERIAL_21285_CONSOLE || SERIAL_SA1100_CONSOLE || SERIAL_ANAKIN_CONSOLE || SERIAL_UART00_CONSOLE || SERIAL_8250_CONSOLE || SERIAL_SUNCORE
depends on SERIAL_AMBA_CONSOLE || SERIAL_CLPS711X_CONSOLE || SERIAL_21285_CONSOLE || SERIAL_SA1100_CONSOLE || SERIAL_ANAKIN_CONSOLE || SERIAL_UART00_CONSOLE || SERIAL_8250_CONSOLE || SERIAL_SUNCORE || V850E_NB85E_UART_CONSOLE
default y
config SERIAL_68328
bool "68328 serial support"
depends on M68328 || M68EZ328 || M68VZ328
help
This driver supports the built-in serial port of the Motorola 68328
(standard, EZ and VZ varities).
config SERIAL_68328_RTS_CTS
bool "Support RTS/CTS on 68328 serial port"
depends on SERIAL_68328
config SERIAL_COLDFIRE
bool "ColdFire serial support"
depends on COLDFIRE
help
This driver supports the built-in serial ports of the Motorola ColdFire
family of CPUs.
config SERIAL_68360_SMC
bool "68360 SMC uart support"
depends on M68360
help
This driver supports the SMC serial ports of the Motorola 68360 CPU.
config SERIAL_68360_SCC
bool "68360 SCC uart support"
depends on M68360
help
This driver supports the SCC serial ports of the Motorola 68360 CPU.
config 68360_SERIAL
bool
depends on SERIAL_68360_SMC || SERIAL_68630_SCC
endmenu
drivers/serial/Makefile
View file @ 07834925
......@@ -24,5 +24,9 @@ obj-$(CONFIG_SERIAL_SUNCORE) += suncore.o
obj-$(CONFIG_SERIAL_SUNZILOG) += sunzilog.o
obj-$(CONFIG_SERIAL_SUNSU) += sunsu.o
obj-$(CONFIG_SERIAL_SUNSAB) += sunsab.o
obj-$(CONFIG_SERIAL_68328) += 68328serial.o
obj-$(CONFIG_SERIAL_68360) += 68360serial.o
obj-$(CONFIG_SERIAL_COLDFIRE) += mcfserial.o
obj-$(CONFIG_V850E_NB85E_UART) += nb85e_uart.o
include $(TOPDIR)/Rules.make
drivers/serial/mcfserial.c 0 → 100644
View file @ 07834925
/*
* mcfserial.c -- serial driver for ColdFire internal UARTS.
*
* Copyright (C) 1999-2002 Greg Ungerer <gerg@snapgear.com>
* Copyright (c) 2000-2001 Lineo, Inc. <www.lineo.com>
* Copyright (C) 2001-2002 SnapGear Inc. <www.snapgear.com>
*
* Based on code from 68332serial.c which was:
*
* Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
* Copyright (C) 1998 TSHG
* Copyright (c) 1999 Rt-Control Inc. <jeff@uclinux.org>
*/
#include <linux/module.h>
#include <linux/errno.h>
#include <linux/signal.h>
#include <linux/sched.h>
#include <linux/timer.h>
#include <linux/wait.h>
#include <linux/interrupt.h>
#include <linux/tty.h>
#include <linux/tty_flip.h>
#include <linux/config.h>
#include <linux/major.h>
#include <linux/string.h>
#include <linux/fcntl.h>
#include <linux/mm.h>
#include <linux/kernel.h>
#include <linux/serial.h>
#include <linux/serialP.h>
#ifdef CONFIG_LEDMAN
#include <linux/ledman.h>
#endif
#include <linux/console.h>
#include <linux/version.h>
#include <linux/init.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/system.h>
#include <asm/segment.h>
#include <asm/semaphore.h>
#include <asm/bitops.h>
#include <asm/delay.h>
#include <asm/coldfire.h>
#include <asm/mcfsim.h>
#include <asm/mcfuart.h>
#include <asm/nettel.h>
#include <asm/uaccess.h>
#include "mcfserial.h"
/*
* the only event we use
*/
#undef RS_EVENT_WRITE_WAKEUP
#define RS_EVENT_WRITE_WAKEUP 0
struct timer_list mcfrs_timer_struct;
/*
* Default console baud rate, we use this as the default
* for all ports so init can just open /dev/console and
* keep going. Perhaps one day the cflag settings for the
* console can be used instead.
*/
#if defined(CONFIG_ARNEWSH) || defined(CONFIG_MOTOROLA) || defined(CONFIG_senTec)
#define CONSOLE_BAUD_RATE 19200
#define DEFAULT_CBAUD B19200
#endif
#ifndef CONSOLE_BAUD_RATE
#define CONSOLE_BAUD_RATE 9600
#define DEFAULT_CBAUD B9600
#endif
int mcfrs_console_inited = 0;
int mcfrs_console_port = -1;
int mcfrs_console_baud = CONSOLE_BAUD_RATE;
int mcfrs_console_cbaud = DEFAULT_CBAUD;
/*
* Driver data structures.
*/
struct tty_driver mcfrs_serial_driver, mcfrs_callout_driver;
static int mcfrs_serial_refcount;
/* serial subtype definitions */
#define SERIAL_TYPE_NORMAL 1
#define SERIAL_TYPE_CALLOUT 2
/* number of characters left in xmit buffer before we ask for more */
#define WAKEUP_CHARS 256
/* Debugging...
*/
#undef SERIAL_DEBUG_OPEN
#undef SERIAL_DEBUG_FLOW
#define _INLINE_ inline
#define IRQBASE 73
/*
* Configuration table, UARTs to look for at startup.
*/
static struct mcf_serial mcfrs_table[] = {
{ 0, (MCF_MBAR+MCFUART_BASE1), IRQBASE, ASYNC_BOOT_AUTOCONF }, /* ttyS0 */
{ 0, (MCF_MBAR+MCFUART_BASE2), IRQBASE+1, ASYNC_BOOT_AUTOCONF }, /* ttyS1 */
};
#define NR_PORTS (sizeof(mcfrs_table) / sizeof(struct mcf_serial))
static struct tty_struct *mcfrs_serial_table[NR_PORTS];
static struct termios *mcfrs_serial_termios[NR_PORTS];
static struct termios *mcfrs_serial_termios_locked[NR_PORTS];
/*
* This is used to figure out the divisor speeds and the timeouts.
*/
static int mcfrs_baud_table[] = {
0, 50, 75, 110, 134, 150, 200, 300, 600, 1200, 1800, 2400, 4800,
9600, 19200, 38400, 57600, 115200, 230400, 460800, 0
};
#define MCFRS_BAUD_TABLE_SIZE \
(sizeof(mcfrs_baud_table)/sizeof(mcfrs_baud_table[0]))
#ifdef CONFIG_MAGIC_SYSRQ
/*
* Magic system request keys. Used for debugging...
*/
extern int magic_sysrq_key(int ch);
#endif
/*
* tmp_buf is used as a temporary buffer by serial_write. We need to
* lock it in case the copy_from_user blocks while swapping in a page,
* and some other program tries to do a serial write at the same time.
* Since the lock will only come under contention when the system is
* swapping and available memory is low, it makes sense to share one
* buffer across all the serial ports, since it significantly saves
* memory if large numbers of serial ports are open.
*/
static unsigned char mcfrs_tmp_buf[4096]; /* This is cheating */
static DECLARE_MUTEX(mcfrs_tmp_buf_sem);
/*
* Forware declarations...
*/
static void mcfrs_change_speed(struct mcf_serial *info);
static inline int serial_paranoia_check(struct mcf_serial *info,
kdev_t device, const char *routine)
{
#ifdef SERIAL_PARANOIA_CHECK
static const char *badmagic =
"MCFRS(warning): bad magic number for serial struct (%d, %d) in %s\n";
static const char *badinfo =
"MCFRS(warning): null mcf_serial for (%d, %d) in %s\n";
if (!info) {
printk(badinfo, MAJOR(device), MINOR(device), routine);
return 1;
}
if (info->magic != SERIAL_MAGIC) {
printk(badmagic, MAJOR(device), MINOR(device), routine);
return 1;
}
#endif
return 0;
}
/*
* Sets or clears DTR and RTS on the requested line.
*/
static void mcfrs_setsignals(struct mcf_serial *info, int dtr, int rts)
{
volatile unsigned char *uartp;
unsigned long flags;
#if 0
printk("%s(%d): mcfrs_setsignals(info=%x,dtr=%d,rts=%d)\n",
__FILE__, __LINE__, info, dtr, rts);
#endif
local_irq_save(flags);
if (dtr >= 0) {
#ifdef MCFPP_DTR0
if (info->line)
mcf_setppdata(MCFPP_DTR1, (dtr ? 0 : MCFPP_DTR1));
else
mcf_setppdata(MCFPP_DTR0, (dtr ? 0 : MCFPP_DTR0));
#endif
}
if (rts >= 0) {
uartp = (volatile unsigned char *) info->addr;
if (rts) {
info->sigs |= TIOCM_RTS;
uartp[MCFUART_UOP1] = MCFUART_UOP_RTS;
} else {
info->sigs &= ~TIOCM_RTS;
uartp[MCFUART_UOP0] = MCFUART_UOP_RTS;
}
}
local_irq_restore(flags);
return;
}
/*
* Gets values of serial signals.
*/
static int mcfrs_getsignals(struct mcf_serial *info)
{
volatile unsigned char *uartp;
unsigned long flags;
int sigs;
#if defined(CONFIG_NETtel) && defined(CONFIG_M5307)
unsigned short ppdata;
#endif
#if 0
printk("%s(%d): mcfrs_getsignals(info=%x)\n", __FILE__, __LINE__);
#endif
local_irq_save(flags);
uartp = (volatile unsigned char *) info->addr;
sigs = (uartp[MCFUART_UIPR] & MCFUART_UIPR_CTS) ? 0 : TIOCM_CTS;
sigs |= (info->sigs & TIOCM_RTS);
#ifdef MCFPP_DCD0
{
unsigned int ppdata;
ppdata = mcf_getppdata();
if (info->line == 0) {
sigs |= (ppdata & MCFPP_DCD0) ? 0 : TIOCM_CD;
sigs |= (ppdata & MCFPP_DTR0) ? 0 : TIOCM_DTR;
} else if (info->line == 1) {
sigs |= (ppdata & MCFPP_DCD1) ? 0 : TIOCM_CD;
sigs |= (ppdata & MCFPP_DTR1) ? 0 : TIOCM_DTR;
}
}
#endif
local_irq_restore(flags);
return(sigs);
}
/*
* ------------------------------------------------------------
* mcfrs_stop() and mcfrs_start()
*
* This routines are called before setting or resetting tty->stopped.
* They enable or disable transmitter interrupts, as necessary.
* ------------------------------------------------------------
*/
static void mcfrs_stop(struct tty_struct *tty)
{
volatile unsigned char *uartp;
struct mcf_serial *info = (struct mcf_serial *)tty->driver_data;
unsigned long flags;
if (serial_paranoia_check(info, tty->device, "mcfrs_stop"))
return;
local_irq_save(flags);
uartp = (volatile unsigned char *) info->addr;
info->imr &= ~MCFUART_UIR_TXREADY;
uartp[MCFUART_UIMR] = info->imr;
local_irq_restore(flags);
}
static void mcfrs_start(struct tty_struct *tty)
{
volatile unsigned char *uartp;
struct mcf_serial *info = (struct mcf_serial *)tty->driver_data;
unsigned long flags;
if (serial_paranoia_check(info, tty->device, "mcfrs_start"))
return;
local_irq_save(flags);
if (info->xmit_cnt && info->xmit_buf) {
uartp = (volatile unsigned char *) info->addr;
info->imr |= MCFUART_UIR_TXREADY;
uartp[MCFUART_UIMR] = info->imr;
}
local_irq_restore(flags);
}
/*
* ----------------------------------------------------------------------
*
* Here starts the interrupt handling routines. All of the following
* subroutines are declared as inline and are folded into
* mcfrs_interrupt(). They were separated out for readability's sake.
*
* Note: mcfrs_interrupt() is a "fast" interrupt, which means that it
* runs with interrupts turned off. People who may want to modify
* mcfrs_interrupt() should try to keep the interrupt handler as fast as
* possible. After you are done making modifications, it is not a bad
* idea to do:
*
* gcc -S -DKERNEL -Wall -Wstrict-prototypes -O6 -fomit-frame-pointer serial.c
*
* and look at the resulting assemble code in serial.s.
*
* - Ted Ts'o (tytso@mit.edu), 7-Mar-93
* -----------------------------------------------------------------------
*/
static _INLINE_ void receive_chars(struct mcf_serial *info, struct pt_regs *regs, unsigned short rx)
{
volatile unsigned char *uartp;
struct tty_struct *tty = info->tty;
unsigned char status, ch;
if (!tty)
return;
#if defined(CONFIG_LEDMAN)
ledman_cmd(LEDMAN_CMD_SET, info->line ? LEDMAN_COM2_RX : LEDMAN_COM1_RX);
#endif
uartp = (volatile unsigned char *) info->addr;
while ((status = uartp[MCFUART_USR]) & MCFUART_USR_RXREADY) {
if (tty->flip.count >= TTY_FLIPBUF_SIZE)
break;
ch = uartp[MCFUART_URB];
info->stats.rx++;
#ifdef CONFIG_MAGIC_SYSRQ
if (mcfrs_console_inited && (info->line == mcfrs_console_port)) {
if (magic_sysrq_key(ch))
continue;
}
#endif
tty->flip.count++;
if (status & MCFUART_USR_RXERR)
uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETERR;
if (status & MCFUART_USR_RXBREAK) {
info->stats.rxbreak++;
*tty->flip.flag_buf_ptr++ = TTY_BREAK;
} else if (status & MCFUART_USR_RXPARITY) {
info->stats.rxparity++;
*tty->flip.flag_buf_ptr++ = TTY_PARITY;
} else if (status & MCFUART_USR_RXOVERRUN) {
info->stats.rxoverrun++;
*tty->flip.flag_buf_ptr++ = TTY_OVERRUN;
} else if (status & MCFUART_USR_RXFRAMING) {
info->stats.rxframing++;
*tty->flip.flag_buf_ptr++ = TTY_FRAME;
} else {
*tty->flip.flag_buf_ptr++ = 0;
}
*tty->flip.char_buf_ptr++ = ch;
}
schedule_work(&tty->flip.work);
return;
}
static _INLINE_ void transmit_chars(struct mcf_serial *info)
{
volatile unsigned char *uartp;
#if defined(CONFIG_LEDMAN)
ledman_cmd(LEDMAN_CMD_SET, info->line ? LEDMAN_COM2_TX : LEDMAN_COM1_TX);
#endif
uartp = (volatile unsigned char *) info->addr;
if (info->x_char) {
/* Send special char - probably flow control */
uartp[MCFUART_UTB] = info->x_char;
info->x_char = 0;
info->stats.tx++;
}
if ((info->xmit_cnt <= 0) || info->tty->stopped) {
info->imr &= ~MCFUART_UIR_TXREADY;
uartp[MCFUART_UIMR] = info->imr;
return;
}
while (uartp[MCFUART_USR] & MCFUART_USR_TXREADY) {
uartp[MCFUART_UTB] = info->xmit_buf[info->xmit_tail++];
info->xmit_tail = info->xmit_tail & (SERIAL_XMIT_SIZE-1);
info->stats.tx++;
if (--info->xmit_cnt <= 0)
break;
}
if (info->xmit_cnt < WAKEUP_CHARS)
schedule_work(&info->tqueue);
return;
}
/*
* This is the serial driver's generic interrupt routine
*/
void mcfrs_interrupt(int irq, void *dev_id, struct pt_regs *regs)
{
struct mcf_serial *info;
unsigned char isr;
info = &mcfrs_table[(irq - IRQBASE)];
isr = (((volatile unsigned char *)info->addr)[MCFUART_UISR]) & info->imr;
if (isr & MCFUART_UIR_RXREADY)
receive_chars(info, regs, isr);
if (isr & MCFUART_UIR_TXREADY)
transmit_chars(info);
#if 0
if (isr & MCFUART_UIR_DELTABREAK) {
printk("%s(%d): delta break!\n", __FILE__, __LINE__);
receive_chars(info, regs, isr);
}
#endif
return;
}
/*
* -------------------------------------------------------------------
* Here ends the serial interrupt routines.
* -------------------------------------------------------------------
*/
static void mcfrs_offintr(void *private)
{
struct mcf_serial *info = (struct mcf_serial *) private;
struct tty_struct *tty;
tty = info->tty;
if (!tty)
return;
if (test_and_clear_bit(RS_EVENT_WRITE_WAKEUP, &info->event)) {
if ((tty->flags & (1 << TTY_DO_WRITE_WAKEUP)) &&
tty->ldisc.write_wakeup)
(tty->ldisc.write_wakeup)(tty);
wake_up_interruptible(&tty->write_wait);
}
}
/*
* Change of state on a DCD line.
*/
void mcfrs_modem_change(struct mcf_serial *info, int dcd)
{
if (info->count == 0)
return;
if (info->flags & ASYNC_CHECK_CD) {
if (dcd) {
wake_up_interruptible(&info->open_wait);
} else if (!((info->flags & ASYNC_CALLOUT_ACTIVE) &&
(info->flags & ASYNC_CALLOUT_NOHUP))) {
schedule_work(&info->tqueue_hangup);
}
}
}
#ifdef MCFPP_DCD0
unsigned short mcfrs_ppstatus;
/*
* This subroutine is called when the RS_TIMER goes off. It is used
* to monitor the state of the DCD lines - since they have no edge
* sensors and interrupt generators.
*/
static void mcfrs_timer(void)
{
unsigned int ppstatus, dcdval, i;
ppstatus = mcf_getppdata() & (MCFPP_DCD0 | MCFPP_DCD1);
if (ppstatus != mcfrs_ppstatus) {
for (i = 0; (i < 2); i++) {
dcdval = (i ? MCFPP_DCD1 : MCFPP_DCD0);
if ((ppstatus & dcdval) != (mcfrs_ppstatus & dcdval)) {
mcfrs_modem_change(&mcfrs_table[i],
((ppstatus & dcdval) ? 0 : 1));
}
}
}
mcfrs_ppstatus = ppstatus;
/* Re-arm timer */
mcfrs_timer_struct.expires = jiffies + HZ/25;
add_timer(&mcfrs_timer_struct);
}
#endif /* MCFPP_DCD0 */
/*
* This routine is called from the scheduler tqueue when the interrupt
* routine has signalled that a hangup has occurred. The path of
* hangup processing is:
*
* serial interrupt routine -> (scheduler tqueue) ->
* do_serial_hangup() -> tty->hangup() -> mcfrs_hangup()
*
*/
static void do_serial_hangup(void *private)
{
struct mcf_serial *info = (struct mcf_serial *) private;
struct tty_struct *tty;
tty = info->tty;
if (!tty)
return;
tty_hangup(tty);
}
static int startup(struct mcf_serial * info)
{
volatile unsigned char *uartp;
unsigned long flags;
if (info->flags & ASYNC_INITIALIZED)
return 0;
if (!info->xmit_buf) {
info->xmit_buf = (unsigned char *) __get_free_page(GFP_KERNEL);
if (!info->xmit_buf)
return -ENOMEM;
}
local_irq_save(flags);
#ifdef SERIAL_DEBUG_OPEN
printk("starting up ttyS%d (irq %d)...\n", info->line, info->irq);
#endif
/*
* Reset UART, get it into known state...
*/
uartp = (volatile unsigned char *) info->addr;
uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETRX; /* reset RX */
uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETTX; /* reset TX */
mcfrs_setsignals(info, 1, 1);
if (info->tty)
clear_bit(TTY_IO_ERROR, &info->tty->flags);
info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
/*
* and set the speed of the serial port
*/
mcfrs_change_speed(info);
/*
* Lastly enable the UART transmitter and receiver, and
* interrupt enables.
*/
info->imr = MCFUART_UIR_RXREADY;
uartp[MCFUART_UCR] = MCFUART_UCR_RXENABLE | MCFUART_UCR_TXENABLE;
uartp[MCFUART_UIMR] = info->imr;
info->flags |= ASYNC_INITIALIZED;
local_irq_restore(flags);
return 0;
}
/*
* This routine will shutdown a serial port; interrupts are disabled, and
* DTR is dropped if the hangup on close termio flag is on.
*/
static void shutdown(struct mcf_serial * info)
{
volatile unsigned char *uartp;
unsigned long flags;
if (!(info->flags & ASYNC_INITIALIZED))
return;
#ifdef SERIAL_DEBUG_OPEN
printk("Shutting down serial port %d (irq %d)....\n", info->line,
info->irq);
#endif
local_irq_save(flags);
uartp = (volatile unsigned char *) info->addr;
uartp[MCFUART_UIMR] = 0; /* mask all interrupts */
uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETRX; /* reset RX */
uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETTX; /* reset TX */
if (!info->tty || (info->tty->termios->c_cflag & HUPCL))
mcfrs_setsignals(info, 0, 0);
if (info->xmit_buf) {
free_page((unsigned long) info->xmit_buf);
info->xmit_buf = 0;
}
if (info->tty)
set_bit(TTY_IO_ERROR, &info->tty->flags);
info->flags &= ~ASYNC_INITIALIZED;
local_irq_restore(flags);
}
/*
* This routine is called to set the UART divisor registers to match
* the specified baud rate for a serial port.
*/
static void mcfrs_change_speed(struct mcf_serial *info)
{
volatile unsigned char *uartp;
unsigned int baudclk, cflag;
unsigned long flags;
unsigned char mr1, mr2;
int i;
if (!info->tty || !info->tty->termios)
return;
cflag = info->tty->termios->c_cflag;
if (info->addr == 0)
return;
#if 0
printk("%s(%d): mcfrs_change_speed()\n", __FILE__, __LINE__);
#endif
i = cflag & CBAUD;
if (i & CBAUDEX) {
i &= ~CBAUDEX;
if (i < 1 || i > 4)
info->tty->termios->c_cflag &= ~CBAUDEX;
else
i += 15;
}
if (i == 0) {
mcfrs_setsignals(info, 0, -1);
return;
}
baudclk = ((MCF_BUSCLK / mcfrs_baud_table[i]) + 16) / 32;
info->baud = mcfrs_baud_table[i];
mr1 = MCFUART_MR1_RXIRQRDY | MCFUART_MR1_RXERRCHAR;
mr2 = 0;
switch (cflag & CSIZE) {
case CS5: mr1 |= MCFUART_MR1_CS5; break;
case CS6: mr1 |= MCFUART_MR1_CS6; break;
case CS7: mr1 |= MCFUART_MR1_CS7; break;
case CS8:
default: mr1 |= MCFUART_MR1_CS8; break;
}
if (cflag & PARENB) {
if (cflag & PARODD)
mr1 |= MCFUART_MR1_PARITYODD;
else
mr1 |= MCFUART_MR1_PARITYEVEN;
} else {
mr1 |= MCFUART_MR1_PARITYNONE;
}
if (cflag & CSTOPB)
mr2 |= MCFUART_MR2_STOP2;
else
mr2 |= MCFUART_MR2_STOP1;
if (cflag & CRTSCTS) {
mr1 |= MCFUART_MR1_RXRTS;
mr2 |= MCFUART_MR2_TXCTS;
}
if (cflag & CLOCAL)
info->flags &= ~ASYNC_CHECK_CD;
else
info->flags |= ASYNC_CHECK_CD;
uartp = (volatile unsigned char *) info->addr;
local_irq_save(flags);
#if 0
printk("%s(%d): mr1=%x mr2=%x baudclk=%x\n", __FILE__, __LINE__,
mr1, mr2, baudclk);
#endif
/*
Note: pg 12-16 of MCF5206e User's Manual states that a
software reset should be performed prior to changing
UMR1,2, UCSR, UACR, bit 7
*/
uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETRX; /* reset RX */
uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETTX; /* reset TX */
uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETMRPTR; /* reset MR pointer */
uartp[MCFUART_UMR] = mr1;
uartp[MCFUART_UMR] = mr2;
uartp[MCFUART_UBG1] = (baudclk & 0xff00) >> 8; /* set msb byte */
uartp[MCFUART_UBG2] = (baudclk & 0xff); /* set lsb byte */
uartp[MCFUART_UCSR] = MCFUART_UCSR_RXCLKTIMER | MCFUART_UCSR_TXCLKTIMER;
uartp[MCFUART_UCR] = MCFUART_UCR_RXENABLE | MCFUART_UCR_TXENABLE;
mcfrs_setsignals(info, 1, -1);
local_irq_restore(flags);
return;
}
static void mcfrs_flush_chars(struct tty_struct *tty)
{
volatile unsigned char *uartp;
struct mcf_serial *info = (struct mcf_serial *)tty->driver_data;
unsigned long flags;
if (serial_paranoia_check(info, tty->device, "mcfrs_flush_chars"))
return;
if (info->xmit_cnt <= 0 || tty->stopped || tty->hw_stopped ||
!info->xmit_buf)
return;
/* Enable transmitter */
local_irq_save(flags);
uartp = (volatile unsigned char *) info->addr;
info->imr |= MCFUART_UIR_TXREADY;
uartp[MCFUART_UIMR] = info->imr;
local_irq_restore(flags);
}
static int mcfrs_write(struct tty_struct * tty, int from_user,
const unsigned char *buf, int count)
{
volatile unsigned char *uartp;
struct mcf_serial *info = (struct mcf_serial *)tty->driver_data;
unsigned long flags;
int c, total = 0;
#if 0
printk("%s(%d): mcfrs_write(tty=%x,from_user=%d,buf=%x,count=%d)\n",
__FILE__, __LINE__, tty, from_user, buf, count);
#endif
if (serial_paranoia_check(info, tty->device, "mcfrs_write"))
return 0;
if (!tty || !info->xmit_buf)
return 0;
local_save_flags(flags);
while (1) {
local_irq_disable();
c = min(count, min(SERIAL_XMIT_SIZE - info->xmit_cnt - 1,
SERIAL_XMIT_SIZE - info->xmit_head));
if (c <= 0) {
local_irq_restore(flags);
break;
}
if (from_user) {
down(&mcfrs_tmp_buf_sem);
copy_from_user(mcfrs_tmp_buf, buf, c);
local_irq_restore(flags);
local_irq_disable();
c = min(c, min(SERIAL_XMIT_SIZE - info->xmit_cnt - 1,
SERIAL_XMIT_SIZE - info->xmit_head));
memcpy(info->xmit_buf + info->xmit_head, mcfrs_tmp_buf, c);
up(&mcfrs_tmp_buf_sem);
} else
memcpy(info->xmit_buf + info->xmit_head, buf, c);
info->xmit_head = (info->xmit_head + c) & (SERIAL_XMIT_SIZE-1);
info->xmit_cnt += c;
local_irq_restore(flags);
buf += c;
count -= c;
total += c;
}
local_irq_disable();
uartp = (volatile unsigned char *) info->addr;
info->imr |= MCFUART_UIR_TXREADY;
uartp[MCFUART_UIMR] = info->imr;
local_irq_restore(flags);
return total;
}
static int mcfrs_write_room(struct tty_struct *tty)
{
struct mcf_serial *info = (struct mcf_serial *)tty->driver_data;
int ret;
if (serial_paranoia_check(info, tty->device, "mcfrs_write_room"))
return 0;
ret = SERIAL_XMIT_SIZE - info->xmit_cnt - 1;
if (ret < 0)
ret = 0;
return ret;
}
static int mcfrs_chars_in_buffer(struct tty_struct *tty)
{
struct mcf_serial *info = (struct mcf_serial *)tty->driver_data;
if (serial_paranoia_check(info, tty->device, "mcfrs_chars_in_buffer"))
return 0;
return info->xmit_cnt;
}
static void mcfrs_flush_buffer(struct tty_struct *tty)
{
struct mcf_serial *info = (struct mcf_serial *)tty->driver_data;
unsigned long flags;
if (serial_paranoia_check(info, tty->device, "mcfrs_flush_buffer"))
return;
local_irq_save(flags);
info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
local_irq_restore(flags);
wake_up_interruptible(&tty->write_wait);
if ((tty->flags & (1 << TTY_DO_WRITE_WAKEUP)) &&
tty->ldisc.write_wakeup)
(tty->ldisc.write_wakeup)(tty);
}
/*
* ------------------------------------------------------------
* mcfrs_throttle()
*
* This routine is called by the upper-layer tty layer to signal that
* incoming characters should be throttled.
* ------------------------------------------------------------
*/
static void mcfrs_throttle(struct tty_struct * tty)
{
struct mcf_serial *info = (struct mcf_serial *)tty->driver_data;
#ifdef SERIAL_DEBUG_THROTTLE
char buf[64];
printk("throttle %s: %d....\n", _tty_name(tty, buf),
tty->ldisc.chars_in_buffer(tty));
#endif
if (serial_paranoia_check(info, tty->device, "mcfrs_throttle"))
return;
if (I_IXOFF(tty))
info->x_char = STOP_CHAR(tty);
/* Turn off RTS line (do this atomic) */
}
static void mcfrs_unthrottle(struct tty_struct * tty)
{
struct mcf_serial *info = (struct mcf_serial *)tty->driver_data;
#ifdef SERIAL_DEBUG_THROTTLE
char buf[64];
printk("unthrottle %s: %d....\n", _tty_name(tty, buf),
tty->ldisc.chars_in_buffer(tty));
#endif
if (serial_paranoia_check(info, tty->device, "mcfrs_unthrottle"))
return;
if (I_IXOFF(tty)) {
if (info->x_char)
info->x_char = 0;
else
info->x_char = START_CHAR(tty);
}
/* Assert RTS line (do this atomic) */
}
/*
* ------------------------------------------------------------
* mcfrs_ioctl() and friends
* ------------------------------------------------------------
*/
static int get_serial_info(struct mcf_serial * info,
struct serial_struct * retinfo)
{
struct serial_struct tmp;
if (!retinfo)
return -EFAULT;
memset(&tmp, 0, sizeof(tmp));
tmp.type = info->type;
tmp.line = info->line;
tmp.port = info->addr;
tmp.irq = info->irq;
tmp.flags = info->flags;
tmp.baud_base = info->baud_base;
tmp.close_delay = info->close_delay;
tmp.closing_wait = info->closing_wait;
tmp.custom_divisor = info->custom_divisor;
copy_to_user(retinfo,&tmp,sizeof(*retinfo));
return 0;
}
static int set_serial_info(struct mcf_serial * info,
struct serial_struct * new_info)
{
struct serial_struct new_serial;
struct mcf_serial old_info;
int retval = 0;
if (!new_info)
return -EFAULT;
copy_from_user(&new_serial,new_info,sizeof(new_serial));
old_info = *info;
if (!capable(CAP_SYS_ADMIN)) {
if ((new_serial.baud_base != info->baud_base) ||
(new_serial.type != info->type) ||
(new_serial.close_delay != info->close_delay) ||
((new_serial.flags & ~ASYNC_USR_MASK) !=
(info->flags & ~ASYNC_USR_MASK)))
return -EPERM;
info->flags = ((info->flags & ~ASYNC_USR_MASK) |
(new_serial.flags & ASYNC_USR_MASK));
info->custom_divisor = new_serial.custom_divisor;
goto check_and_exit;
}
if (info->count > 1)
return -EBUSY;
/*
* OK, past this point, all the error checking has been done.
* At this point, we start making changes.....
*/
info->baud_base = new_serial.baud_base;
info->flags = ((info->flags & ~ASYNC_FLAGS) |
(new_serial.flags & ASYNC_FLAGS));
info->type = new_serial.type;
info->close_delay = new_serial.close_delay;
info->closing_wait = new_serial.closing_wait;
check_and_exit:
retval = startup(info);
return retval;
}
/*
* get_lsr_info - get line status register info
*
* Purpose: Let user call ioctl() to get info when the UART physically
* is emptied. On bus types like RS485, the transmitter must
* release the bus after transmitting. This must be done when
* the transmit shift register is empty, not be done when the
* transmit holding register is empty. This functionality
* allows an RS485 driver to be written in user space.
*/
static int get_lsr_info(struct mcf_serial * info, unsigned int *value)
{
volatile unsigned char *uartp;
unsigned long flags;
unsigned char status;
local_irq_save(flags);
uartp = (volatile unsigned char *) info->addr;
status = (uartp[MCFUART_USR] & MCFUART_USR_TXEMPTY) ? TIOCSER_TEMT : 0;
local_irq_restore(flags);
put_user(status,value);
return 0;
}
/*
* This routine sends a break character out the serial port.
*/
static void send_break( struct mcf_serial * info, int duration)
{
volatile unsigned char *uartp;
unsigned long flags;
if (!info->addr)
return;
current->state = TASK_INTERRUPTIBLE;
uartp = (volatile unsigned char *) info->addr;
local_irq_save(flags);
uartp[MCFUART_UCR] = MCFUART_UCR_CMDBREAKSTART;
schedule_timeout(jiffies + duration);
uartp[MCFUART_UCR] = MCFUART_UCR_CMDBREAKSTOP;
local_irq_restore(flags);
}
static int mcfrs_ioctl(struct tty_struct *tty, struct file * file,
unsigned int cmd, unsigned long arg)
{
struct mcf_serial * info = (struct mcf_serial *)tty->driver_data;
unsigned int val;
int retval, error;
int dtr, rts;
if (serial_paranoia_check(info, tty->device, "mcfrs_ioctl"))
return -ENODEV;
if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) &&
(cmd != TIOCSERCONFIG) && (cmd != TIOCSERGWILD) &&
(cmd != TIOCSERSWILD) && (cmd != TIOCSERGSTRUCT)) {
if (tty->flags & (1 << TTY_IO_ERROR))
return -EIO;
}
switch (cmd) {
case TCSBRK: /* SVID version: non-zero arg --> no break */
retval = tty_check_change(tty);
if (retval)
return retval;
tty_wait_until_sent(tty, 0);
if (!arg)
send_break(info, HZ/4); /* 1/4 second */
return 0;
case TCSBRKP: /* support for POSIX tcsendbreak() */
retval = tty_check_change(tty);
if (retval)
return retval;
tty_wait_until_sent(tty, 0);
send_break(info, arg ? arg*(HZ/10) : HZ/4);
return 0;
case TIOCGSOFTCAR:
error = verify_area(VERIFY_WRITE, (void *) arg,sizeof(long));
if (error)
return error;
put_user(C_CLOCAL(tty) ? 1 : 0,
(unsigned long *) arg);
return 0;
case TIOCSSOFTCAR:
get_user(arg, (unsigned long *) arg);
tty->termios->c_cflag =
((tty->termios->c_cflag & ~CLOCAL) |
(arg ? CLOCAL : 0));
return 0;
case TIOCGSERIAL:
error = verify_area(VERIFY_WRITE, (void *) arg,
sizeof(struct serial_struct));
if (error)
return error;
return get_serial_info(info,
(struct serial_struct *) arg);
case TIOCSSERIAL:
return set_serial_info(info,
(struct serial_struct *) arg);
case TIOCSERGETLSR: /* Get line status register */
error = verify_area(VERIFY_WRITE, (void *) arg,
sizeof(unsigned int));
if (error)
return error;
else
return get_lsr_info(info, (unsigned int *) arg);
case TIOCSERGSTRUCT:
error = verify_area(VERIFY_WRITE, (void *) arg,
sizeof(struct mcf_serial));
if (error)
return error;
copy_to_user((struct mcf_serial *) arg,
info, sizeof(struct mcf_serial));
return 0;
case TIOCMGET:
if ((error = verify_area(VERIFY_WRITE, (void *) arg,
sizeof(unsigned int))))
return(error);
val = mcfrs_getsignals(info);
put_user(val, (unsigned int *) arg);
break;
case TIOCMBIS:
if ((error = verify_area(VERIFY_WRITE, (void *) arg,
sizeof(unsigned int))))
return(error);
get_user(val, (unsigned int *) arg);
rts = (val & TIOCM_RTS) ? 1 : -1;
dtr = (val & TIOCM_DTR) ? 1 : -1;
mcfrs_setsignals(info, dtr, rts);
break;
case TIOCMBIC:
if ((error = verify_area(VERIFY_WRITE, (void *) arg,
sizeof(unsigned int))))
return(error);
get_user(val, (unsigned int *) arg);
rts = (val & TIOCM_RTS) ? 0 : -1;
dtr = (val & TIOCM_DTR) ? 0 : -1;
mcfrs_setsignals(info, dtr, rts);
break;
case TIOCMSET:
if ((error = verify_area(VERIFY_WRITE, (void *) arg,
sizeof(unsigned int))))
return(error);
get_user(val, (unsigned int *) arg);
rts = (val & TIOCM_RTS) ? 1 : 0;
dtr = (val & TIOCM_DTR) ? 1 : 0;
mcfrs_setsignals(info, dtr, rts);
break;
#ifdef TIOCSET422
case TIOCSET422:
get_user(val, (unsigned int *) arg);
mcf_setpa(MCFPP_PA11, (val ? 0 : MCFPP_PA11));
break;
case TIOCGET422:
val = (mcf_getpa() & MCFPP_PA11) ? 0 : 1;
put_user(val, (unsigned int *) arg);
break;
#endif
default:
return -ENOIOCTLCMD;
}
return 0;
}
static void mcfrs_set_termios(struct tty_struct *tty, struct termios *old_termios)
{
struct mcf_serial *info = (struct mcf_serial *)tty->driver_data;
if (tty->termios->c_cflag == old_termios->c_cflag)
return;
mcfrs_change_speed(info);
if ((old_termios->c_cflag & CRTSCTS) &&
!(tty->termios->c_cflag & CRTSCTS)) {
tty->hw_stopped = 0;
mcfrs_setsignals(info, -1, 1);
#if 0
mcfrs_start(tty);
#endif
}
}
/*
* ------------------------------------------------------------
* mcfrs_close()
*
* This routine is called when the serial port gets closed. First, we
* wait for the last remaining data to be sent. Then, we unlink its
* S structure from the interrupt chain if necessary, and we free
* that IRQ if nothing is left in the chain.
* ------------------------------------------------------------
*/
static void mcfrs_close(struct tty_struct *tty, struct file * filp)
{
volatile unsigned char *uartp;
struct mcf_serial *info = (struct mcf_serial *)tty->driver_data;
unsigned long flags;
if (!info || serial_paranoia_check(info, tty->device, "mcfrs_close"))
return;
local_irq_save(flags);
if (tty_hung_up_p(filp)) {
local_irq_restore(flags);
return;
}
#ifdef SERIAL_DEBUG_OPEN
printk("mcfrs_close ttyS%d, count = %d\n", info->line, info->count);
#endif
if ((tty->count == 1) && (info->count != 1)) {
/*
* Uh, oh. tty->count is 1, which means that the tty
* structure will be freed. Info->count should always
* be one in these conditions. If it's greater than
* one, we've got real problems, since it means the
* serial port won't be shutdown.
*/
printk("MCFRS: bad serial port count; tty->count is 1, "
"info->count is %d\n", info->count);
info->count = 1;
}
if (--info->count < 0) {
printk("MCFRS: bad serial port count for ttyS%d: %d\n",
info->line, info->count);
info->count = 0;
}
if (info->count) {
local_irq_restore(flags);
return;
}
info->flags |= ASYNC_CLOSING;
/*
* Save the termios structure, since this port may have
* separate termios for callout and dialin.
*/
if (info->flags & ASYNC_NORMAL_ACTIVE)
info->normal_termios = *tty->termios;
if (info->flags & ASYNC_CALLOUT_ACTIVE)
info->callout_termios = *tty->termios;
/*
* Now we wait for the transmit buffer to clear; and we notify
* the line discipline to only process XON/XOFF characters.
*/
tty->closing = 1;
if (info->closing_wait != ASYNC_CLOSING_WAIT_NONE)
tty_wait_until_sent(tty, info->closing_wait);
/*
* At this point we stop accepting input. To do this, we
* disable the receive line status interrupts, and tell the
* interrupt driver to stop checking the data ready bit in the
* line status register.
*/
info->imr &= ~MCFUART_UIR_RXREADY;
uartp = (volatile unsigned char *) info->addr;
uartp[MCFUART_UIMR] = info->imr;
#if 0
/* FIXME: do we need to keep this enabled for console?? */
if (mcfrs_console_inited && (mcfrs_console_port == info->line)) {
/* Do not disable the UART */ ;
} else
#endif
shutdown(info);
if (tty->driver.flush_buffer)
tty->driver.flush_buffer(tty);
if (tty->ldisc.flush_buffer)
tty->ldisc.flush_buffer(tty);
tty->closing = 0;
info->event = 0;
info->tty = 0;
if (tty->ldisc.num != ldiscs[N_TTY].num) {
if (tty->ldisc.close)
(tty->ldisc.close)(tty);
tty->ldisc = ldiscs[N_TTY];
tty->termios->c_line = N_TTY;
if (tty->ldisc.open)
(tty->ldisc.open)(tty);
}
if (info->blocked_open) {
if (info->close_delay) {
current->state = TASK_INTERRUPTIBLE;
schedule_timeout(info->close_delay);
}
wake_up_interruptible(&info->open_wait);
}
info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CALLOUT_ACTIVE|
ASYNC_CLOSING);
wake_up_interruptible(&info->close_wait);
local_irq_restore(flags);
}
/*
* mcfrs_hangup() --- called by tty_hangup() when a hangup is signaled.
*/
void mcfrs_hangup(struct tty_struct *tty)
{
struct mcf_serial * info = (struct mcf_serial *)tty->driver_data;
if (serial_paranoia_check(info, tty->device, "mcfrs_hangup"))
return;
mcfrs_flush_buffer(tty);
shutdown(info);
info->event = 0;
info->count = 0;
info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CALLOUT_ACTIVE);
info->tty = 0;
wake_up_interruptible(&info->open_wait);
}
/*
* ------------------------------------------------------------
* mcfrs_open() and friends
* ------------------------------------------------------------
*/
static int block_til_ready(struct tty_struct *tty, struct file * filp,
struct mcf_serial *info)
{
DECLARE_WAITQUEUE(wait, current);
int retval;
int do_clocal = 0;
/*
* If the device is in the middle of being closed, then block
* until it's done, and then try again.
*/
if (info->flags & ASYNC_CLOSING) {
interruptible_sleep_on(&info->close_wait);
#ifdef SERIAL_DO_RESTART
if (info->flags & ASYNC_HUP_NOTIFY)
return -EAGAIN;
else
return -ERESTARTSYS;
#else
return -EAGAIN;
#endif
}
/*
* If this is a callout device, then just make sure the normal
* device isn't being used.
*/
if (tty->driver.subtype == SERIAL_TYPE_CALLOUT) {
if (info->flags & ASYNC_NORMAL_ACTIVE)
return -EBUSY;
if ((info->flags & ASYNC_CALLOUT_ACTIVE) &&
(info->flags & ASYNC_SESSION_LOCKOUT) &&
(info->session != current->session))
return -EBUSY;
if ((info->flags & ASYNC_CALLOUT_ACTIVE) &&
(info->flags & ASYNC_PGRP_LOCKOUT) &&
(info->pgrp != current->pgrp))
return -EBUSY;
info->flags |= ASYNC_CALLOUT_ACTIVE;
return 0;
}
/*
* If non-blocking mode is set, or the port is not enabled,
* then make the check up front and then exit.
*/
if ((filp->f_flags & O_NONBLOCK) ||
(tty->flags & (1 << TTY_IO_ERROR))) {
if (info->flags & ASYNC_CALLOUT_ACTIVE)
return -EBUSY;
info->flags |= ASYNC_NORMAL_ACTIVE;
return 0;
}
if (info->flags & ASYNC_CALLOUT_ACTIVE) {
if (info->normal_termios.c_cflag & CLOCAL)
do_clocal = 1;
} else {
if (tty->termios->c_cflag & CLOCAL)
do_clocal = 1;
}
/*
* Block waiting for the carrier detect and the line to become
* free (i.e., not in use by the callout). While we are in
* this loop, info->count is dropped by one, so that
* mcfrs_close() knows when to free things. We restore it upon
* exit, either normal or abnormal.
*/
retval = 0;
add_wait_queue(&info->open_wait, &wait);
#ifdef SERIAL_DEBUG_OPEN
printk("block_til_ready before block: ttyS%d, count = %d\n",
info->line, info->count);
#endif
info->count--;
info->blocked_open++;
while (1) {
local_irq_disable();
if (!(info->flags & ASYNC_CALLOUT_ACTIVE))
mcfrs_setsignals(info, 1, 1);
local_irq_enable();
current->state = TASK_INTERRUPTIBLE;
if (tty_hung_up_p(filp) ||
!(info->flags & ASYNC_INITIALIZED)) {
#ifdef SERIAL_DO_RESTART
if (info->flags & ASYNC_HUP_NOTIFY)
retval = -EAGAIN;
else
retval = -ERESTARTSYS;
#else
retval = -EAGAIN;
#endif
break;
}
if (!(info->flags & ASYNC_CALLOUT_ACTIVE) &&
!(info->flags & ASYNC_CLOSING) &&
(do_clocal || (mcfrs_getsignals(info) & TIOCM_CD)))
break;
if (signal_pending(current)) {
retval = -ERESTARTSYS;
break;
}
#ifdef SERIAL_DEBUG_OPEN
printk("block_til_ready blocking: ttyS%d, count = %d\n",
info->line, info->count);
#endif
schedule();
}
current->state = TASK_RUNNING;
remove_wait_queue(&info->open_wait, &wait);
if (!tty_hung_up_p(filp))
info->count++;
info->blocked_open--;
#ifdef SERIAL_DEBUG_OPEN
printk("block_til_ready after blocking: ttyS%d, count = %d\n",
info->line, info->count);
#endif
if (retval)
return retval;
info->flags |= ASYNC_NORMAL_ACTIVE;
return 0;
}
/*
* This routine is called whenever a serial port is opened. It
* enables interrupts for a serial port, linking in its structure into
* the IRQ chain. It also performs the serial-specific
* initialization for the tty structure.
*/
int mcfrs_open(struct tty_struct *tty, struct file * filp)
{
struct mcf_serial *info;
int retval, line;
line = minor(tty->device) - tty->driver.minor_start;
if ((line < 0) || (line >= NR_PORTS))
return -ENODEV;
info = mcfrs_table + line;
if (serial_paranoia_check(info, tty->device, "mcfrs_open"))
return -ENODEV;
#ifdef SERIAL_DEBUG_OPEN
printk("mcfrs_open %s%d, count = %d\n", tty->driver.name, info->line,
info->count);
#endif
info->count++;
tty->driver_data = info;
info->tty = tty;
/*
* Start up serial port
*/
retval = startup(info);
if (retval)
return retval;
retval = block_til_ready(tty, filp, info);
if (retval) {
#ifdef SERIAL_DEBUG_OPEN
printk("mcfrs_open returning after block_til_ready with %d\n",
retval);
#endif
return retval;
}
if ((info->count == 1) && (info->flags & ASYNC_SPLIT_TERMIOS)) {
if (tty->driver.subtype == SERIAL_TYPE_NORMAL)
*tty->termios = info->normal_termios;
else
*tty->termios = info->callout_termios;
mcfrs_change_speed(info);
}
info->session = current->session;
info->pgrp = current->pgrp;
#ifdef SERIAL_DEBUG_OPEN
printk("mcfrs_open ttyS%d successful...\n", info->line);
#endif
return 0;
}
/*
* Based on the line number set up the internal interrupt stuff.
*/
static void mcfrs_irqinit(struct mcf_serial *info)
{
#ifdef CONFIG_M5272
volatile unsigned long *icrp;
volatile unsigned long *portp;
volatile unsigned char *uartp;
uartp = (volatile unsigned char *) info->addr;
icrp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_ICR2);
switch (info->line) {
case 0:
*icrp = 0xe0000000;
break;
case 1:
*icrp = 0x0e000000;
break;
default:
printk("MCFRS: don't know how to handle UART %d interrupt?\n",
info->line);
return;
}
/* Enable the output lines for the serial ports */
portp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_PBCNT);
*portp = (*portp & ~0x000000ff) | 0x00000055;
portp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_PDCNT);
*portp = (*portp & ~0x000003fc) | 0x000002a8;
#else
volatile unsigned char *icrp, *uartp;
switch (info->line) {
case 0:
icrp = (volatile unsigned char *) (MCF_MBAR + MCFSIM_UART1ICR);
*icrp = /*MCFSIM_ICR_AUTOVEC |*/ MCFSIM_ICR_LEVEL6 |
MCFSIM_ICR_PRI1;
mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_UART1);
break;
case 1:
icrp = (volatile unsigned char *) (MCF_MBAR + MCFSIM_UART2ICR);
*icrp = /*MCFSIM_ICR_AUTOVEC |*/ MCFSIM_ICR_LEVEL6 |
MCFSIM_ICR_PRI2;
mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_UART2);
break;
default:
printk("MCFRS: don't know how to handle UART %d interrupt?\n",
info->line);
return;
}
uartp = (volatile unsigned char *) info->addr;
uartp[MCFUART_UIVR] = info->irq;
#endif
/* Clear mask, so no surprise interrupts. */
uartp[MCFUART_UIMR] = 0;
if (request_irq(info->irq, mcfrs_interrupt, SA_INTERRUPT,
"ColdFire UART", NULL)) {
printk("MCFRS: Unable to attach ColdFire UART %d interrupt "
"vector=%d\n", info->line, info->irq);
}
return;
}
char *mcfrs_drivername = "ColdFire internal UART serial driver version 1.00\n";
/*
* Serial stats reporting...
*/
int mcfrs_readproc(char *page, char **start, off_t off, int count,
int *eof, void *data)
{
struct mcf_serial *info;
char str[20];
int len, sigs, i;
len = sprintf(page, mcfrs_drivername);
for (i = 0; (i < NR_PORTS); i++) {
info = &mcfrs_table[i];
len += sprintf((page + len), "%d: port:%x irq=%d baud:%d ",
i, info->addr, info->irq, info->baud);
if (info->stats.rx || info->stats.tx)
len += sprintf((page + len), "tx:%d rx:%d ",
info->stats.tx, info->stats.rx);
if (info->stats.rxframing)
len += sprintf((page + len), "fe:%d ",
info->stats.rxframing);
if (info->stats.rxparity)
len += sprintf((page + len), "pe:%d ",
info->stats.rxparity);
if (info->stats.rxbreak)
len += sprintf((page + len), "brk:%d ",
info->stats.rxbreak);
if (info->stats.rxoverrun)
len += sprintf((page + len), "oe:%d ",
info->stats.rxoverrun);
str[0] = str[1] = 0;
if ((sigs = mcfrs_getsignals(info))) {
if (sigs & TIOCM_RTS)
strcat(str, "|RTS");
if (sigs & TIOCM_CTS)
strcat(str, "|CTS");
if (sigs & TIOCM_DTR)
strcat(str, "|DTR");
if (sigs & TIOCM_CD)
strcat(str, "|CD");
}
len += sprintf((page + len), "%s\n", &str[1]);
}
return(len);
}
/* Finally, routines used to initialize the serial driver. */
static void show_serial_version(void)
{
printk(mcfrs_drivername);
}
/* mcfrs_init inits the driver */
static int __init
mcfrs_init(void)
{
struct mcf_serial *info;
unsigned long flags;
int i;
/* Setup base handler, and timer table. */
#ifdef MCFPP_DCD0
init_timer(&mcfrs_timer_struct);
mcfrs_timer_struct.function = mcfrs_timer;
mcfrs_timer_struct.data = 0;
mcfrs_timer_struct.expires = jiffies + HZ/25;
add_timer(&mcfrs_timer_struct);
mcfrs_ppstatus = mcf_getppdata() & (MCFPP_DCD0 | MCFPP_DCD1);
#endif
show_serial_version();
/* Initialize the tty_driver structure */
memset(&mcfrs_serial_driver, 0, sizeof(struct tty_driver));
mcfrs_serial_driver.magic = TTY_DRIVER_MAGIC;
mcfrs_serial_driver.name = "ttyS";
mcfrs_serial_driver.major = TTY_MAJOR;
mcfrs_serial_driver.minor_start = 64;
mcfrs_serial_driver.num = NR_PORTS;
mcfrs_serial_driver.type = TTY_DRIVER_TYPE_SERIAL;
mcfrs_serial_driver.subtype = SERIAL_TYPE_NORMAL;
mcfrs_serial_driver.init_termios = tty_std_termios;
mcfrs_serial_driver.init_termios.c_cflag =
mcfrs_console_cbaud | CS8 | CREAD | HUPCL | CLOCAL;
mcfrs_serial_driver.flags = TTY_DRIVER_REAL_RAW;
mcfrs_serial_driver.refcount = &mcfrs_serial_refcount;
mcfrs_serial_driver.table = mcfrs_serial_table;
mcfrs_serial_driver.termios = mcfrs_serial_termios;
mcfrs_serial_driver.termios_locked = mcfrs_serial_termios_locked;
mcfrs_serial_driver.open = mcfrs_open;
mcfrs_serial_driver.close = mcfrs_close;
mcfrs_serial_driver.write = mcfrs_write;
mcfrs_serial_driver.flush_chars = mcfrs_flush_chars;
mcfrs_serial_driver.write_room = mcfrs_write_room;
mcfrs_serial_driver.chars_in_buffer = mcfrs_chars_in_buffer;
mcfrs_serial_driver.flush_buffer = mcfrs_flush_buffer;
mcfrs_serial_driver.ioctl = mcfrs_ioctl;
mcfrs_serial_driver.throttle = mcfrs_throttle;
mcfrs_serial_driver.unthrottle = mcfrs_unthrottle;
mcfrs_serial_driver.set_termios = mcfrs_set_termios;
mcfrs_serial_driver.stop = mcfrs_stop;
mcfrs_serial_driver.start = mcfrs_start;
mcfrs_serial_driver.hangup = mcfrs_hangup;
mcfrs_serial_driver.read_proc = mcfrs_readproc;
mcfrs_serial_driver.driver_name = "serial";
/*
* The callout device is just like normal device except for
* major number and the subtype code.
*/
mcfrs_callout_driver = mcfrs_serial_driver;
mcfrs_callout_driver.name = "cua";
mcfrs_callout_driver.major = TTYAUX_MAJOR;
mcfrs_callout_driver.subtype = SERIAL_TYPE_CALLOUT;
mcfrs_callout_driver.read_proc = 0;
mcfrs_callout_driver.proc_entry = 0;
if (tty_register_driver(&mcfrs_serial_driver)) {
printk("MCFRS: Couldn't register serial driver\n");
return(-EBUSY);
}
if (tty_register_driver(&mcfrs_callout_driver)) {
printk("MCFRS: Couldn't register callout driver\n");
return(-EBUSY);
}
local_irq_save(flags);
/*
* Configure all the attached serial ports.
*/
for (i = 0, info = mcfrs_table; (i < NR_PORTS); i++, info++) {
info->magic = SERIAL_MAGIC;
info->line = i;
info->tty = 0;
info->custom_divisor = 16;
info->close_delay = 50;
info->closing_wait = 3000;
info->x_char = 0;
info->event = 0;
info->count = 0;
info->blocked_open = 0;
INIT_WORK(&info->tqueue, mcfrs_offintr, info);
INIT_WORK(&info->tqueue_hangup, do_serial_hangup, info);
info->callout_termios = mcfrs_callout_driver.init_termios;
info->normal_termios = mcfrs_serial_driver.init_termios;
init_waitqueue_head(&info->open_wait);
init_waitqueue_head(&info->close_wait);
info->imr = 0;
mcfrs_setsignals(info, 0, 0);
mcfrs_irqinit(info);
printk("%s%d at 0x%04x (irq = %d)", mcfrs_serial_driver.name,
info->line, info->addr, info->irq);
printk(" is a builtin ColdFire UART\n");
}
local_irq_restore(flags);
return 0;
}
module_init(mcfrs_init);
/* DAVIDM module_exit(mcfrs_fini); */
/****************************************************************************/
/* Serial Console */
/****************************************************************************/
/*
* Quick and dirty UART initialization, for console output.
*/
void mcfrs_init_console(void)
{
volatile unsigned char *uartp;
unsigned int clk;
/*
* Reset UART, get it into known state...
*/
uartp = (volatile unsigned char *) (MCF_MBAR +
(mcfrs_console_port ? MCFUART_BASE2 : MCFUART_BASE1));
uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETRX; /* reset RX */
uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETTX; /* reset TX */
uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETMRPTR; /* reset MR pointer */
/*
* Set port for defined baud , 8 data bits, 1 stop bit, no parity.
*/
uartp[MCFUART_UMR] = MCFUART_MR1_PARITYNONE | MCFUART_MR1_CS8;
uartp[MCFUART_UMR] = MCFUART_MR2_STOP1;
clk = ((MCF_BUSCLK / mcfrs_console_baud) + 16) / 32; /* set baud */
uartp[MCFUART_UBG1] = (clk & 0xff00) >> 8; /* set msb baud */
uartp[MCFUART_UBG2] = (clk & 0xff); /* set lsb baud */
uartp[MCFUART_UCSR] = MCFUART_UCSR_RXCLKTIMER | MCFUART_UCSR_TXCLKTIMER;
uartp[MCFUART_UCR] = MCFUART_UCR_RXENABLE | MCFUART_UCR_TXENABLE;
mcfrs_console_inited++;
return;
}
/*
* Setup for console. Argument comes from the boot command line.
*/
int mcfrs_console_setup(struct console *cp, char *arg)
{
int i, n = CONSOLE_BAUD_RATE;
if (!cp)
return(-1);
if (!strncmp(cp->name, "ttyS", 4))
mcfrs_console_port = cp->index;
else if (!strncmp(cp->name, "cua", 3))
mcfrs_console_port = cp->index;
else
return(-1);
if (arg)
n = simple_strtoul(arg,NULL,0);
for (i = 0; i < MCFRS_BAUD_TABLE_SIZE; i++)
if (mcfrs_baud_table[i] == n)
break;
if (i < MCFRS_BAUD_TABLE_SIZE) {
mcfrs_console_baud = n;
mcfrs_console_cbaud = 0;
if (i > 15) {
mcfrs_console_cbaud |= CBAUDEX;
i -= 15;
}
mcfrs_console_cbaud |= i;
}
mcfrs_init_console(); /* make sure baud rate changes */
return(0);
}
static kdev_t mcfrs_console_device(struct console *c)
{
return mk_kdev(TTY_MAJOR, 64 + c->index);
}
/*
* Output a single character, using UART polled mode.
* This is used for console output.
*/
void mcfrs_put_char(char ch)
{
volatile unsigned char *uartp;
unsigned long flags;
int i;
uartp = (volatile unsigned char *) (MCF_MBAR +
(mcfrs_console_port ? MCFUART_BASE2 : MCFUART_BASE1));
local_irq_save(flags);
for (i = 0; (i < 0x10000); i++) {
if (uartp[MCFUART_USR] & MCFUART_USR_TXREADY)
break;
}
if (i < 0x10000) {
uartp[MCFUART_UTB] = ch;
for (i = 0; (i < 0x10000); i++)
if (uartp[MCFUART_USR] & MCFUART_USR_TXEMPTY)
break;
}
if (i >= 0x10000)
mcfrs_init_console(); /* try and get it back */
local_irq_restore(flags);
return;
}
/*
* rs_console_write is registered for printk output.
*/
void mcfrs_console_write(struct console *cp, const char *p, unsigned len)
{
if (!mcfrs_console_inited)
mcfrs_init_console();
while (len-- > 0) {
if (*p == '\n')
mcfrs_put_char('\r');
mcfrs_put_char(*p++);
}
}
/*
* declare our consoles
*/
struct console mcfrs_console = {
name: "ttyS",
write: mcfrs_console_write,
device: mcfrs_console_device,
setup: mcfrs_console_setup,
flags: CON_PRINTBUFFER,
index: -1,
};
void __init mcfrs_console_init(void)
{
register_console(&mcfrs_console);
}
/****************************************************************************/
drivers/serial/mcfserial.h 0 → 100644
View file @ 07834925
/*
* mcfserial.c -- serial driver for ColdFire internal UARTS.
*
* Copyright (c) 1999 Greg Ungerer <gerg@snapgear.com>
* Copyright (c) 2000-2001 Lineo, Inc. <www.lineo.com>
* Copyright (c) 2002 SnapGear Inc., <www.snapgear.com>
*
* Based on code from 68332serial.c which was:
*
* Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
* Copyright (C) 1998 TSHG
* Copyright (c) 1999 Rt-Control Inc. <jeff@uclinux.org>
*/
#ifndef _MCF_SERIAL_H
#define _MCF_SERIAL_H
#include <linux/config.h>
#include <linux/serial.h>
#ifdef __KERNEL__
/*
* Define a local serial stats structure.
*/
struct mcf_stats {
unsigned int rx;
unsigned int tx;
unsigned int rxbreak;
unsigned int rxframing;
unsigned int rxparity;
unsigned int rxoverrun;
};
/*
* This is our internal structure for each serial port's state.
* Each serial port has one of these structures associated with it.
*/
struct mcf_serial {
int magic;
unsigned int addr; /* UART memory address */
int irq;
int flags; /* defined in tty.h */
int type; /* UART type */
struct tty_struct *tty;
unsigned char imr; /* Software imr register */
unsigned int baud;
int sigs;
int custom_divisor;
int x_char; /* xon/xoff character */
int baud_base;
int close_delay;
unsigned short closing_wait;
unsigned short closing_wait2;
unsigned long event;
int line;
int count; /* # of fd on device */
int blocked_open; /* # of blocked opens */
long session; /* Session of opening process */
long pgrp; /* pgrp of opening process */
unsigned char *xmit_buf;
int xmit_head;
int xmit_tail;
int xmit_cnt;
struct mcf_stats stats;
struct work_struct tqueue;
struct work_struct tqueue_hangup;
struct termios normal_termios;
struct termios callout_termios;
#if LINUX_VERSION_CODE <= 0x020100
struct wait_queue *open_wait;
struct wait_queue *close_wait;
#else
wait_queue_head_t open_wait;
wait_queue_head_t close_wait;
#endif
};
#endif /* __KERNEL__ */
#endif /* _MCF_SERIAL_H */
drivers/serial/nb85e_uart.c 0 → 100644
View file @ 07834925
/*
* drivers/serial/nb85e_uart.c -- Serial I/O using V850E/NB85E on-chip UART
*
* Copyright (C) 2001,02 NEC Corporation
* Copyright (C) 2001,02 Miles Bader <miles@gnu.org>
*
* This file is subject to the terms and conditions of the GNU General
* Public License. See the file COPYING in the main directory of this
* archive for more details.
*
* Written by Miles Bader <miles@gnu.org>
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/console.h>
#include <linux/tty.h>
#include <linux/tty_flip.h>
#include <linux/serial.h>
#include <linux/serial_core.h>
#include <asm/nb85e_uart.h>
#include <asm/nb85e_utils.h>
/* Initial UART state. This may be overridden by machine-dependent headers. */
#ifndef NB85E_UART_INIT_BAUD
#define NB85E_UART_INIT_BAUD 38400
#endif
#ifndef NB85E_UART_INIT_CFLAGS
#define NB85E_UART_INIT_CFLAGS (B38400 | CS8 | CREAD)
#endif
/* A string used for prefixing printed descriptions; since the same UART
macro is actually used on other chips than the V850E/NB85E. This must
be a constant string. */
#ifndef NB85E_UART_CHIP_NAME
#define NB85E_UART_CHIP_NAME "V850E/NB85E"
#endif
/* Low-level UART functions. */
/* These masks define which control bits affect TX/RX modes, respectively. */
#define RX_BITS \
(NB85E_UART_ASIM_PS_MASK | NB85E_UART_ASIM_CL_8 | NB85E_UART_ASIM_ISRM)
#define TX_BITS \
(NB85E_UART_ASIM_PS_MASK | NB85E_UART_ASIM_CL_8 | NB85E_UART_ASIM_SL_2)
/* The UART require various delays after writing control registers. */
static inline void nb85e_uart_delay (unsigned cycles)
{
/* The loop takes 2 insns, so loop CYCLES / 2 times. */
register unsigned count = cycles >> 1;
while (--count != 0)
/* nothing */;
}
/* Configure and turn on uart channel CHAN, using the termios `control
modes' bits in CFLAGS, and a baud-rate of BAUD. */
void nb85e_uart_configure (unsigned chan, unsigned cflags, unsigned baud)
{
int cksr_min, flags;
unsigned new_config = 0; /* What we'll write to the control reg. */
unsigned new_clk_divlog2; /* New baud-rate generate clock divider. */
unsigned new_brgen_count; /* New counter max for baud-rate generator.*/
/* These are the current values corresponding to the above. */
unsigned old_config, old_clk_divlog2, old_brgen_count;
/* Calculate new baud-rate generator config values. */
cksr_min = 0;
while ((NB85E_UART_BASE_FREQ >> cksr_min) > NB85E_UART_CKSR_MAX_FREQ)
cksr_min++;
/* Calculate the log2 clock divider and baud-rate counter values
(note that the UART divides the resulting clock by 2, so
multiply BAUD by 2 here to compensate). */
calc_counter_params (NB85E_UART_BASE_FREQ, baud * 2,
cksr_min, NB85E_UART_CKSR_MAX, 8/*bits*/,
&new_clk_divlog2, &new_brgen_count);
/* Figure out new configuration of control register. */
if (cflags & CSTOPB)
/* Number of stop bits, 1 or 2. */
new_config |= NB85E_UART_ASIM_SL_2;
if ((cflags & CSIZE) == CS8)
/* Number of data bits, 7 or 8. */
new_config |= NB85E_UART_ASIM_CL_8;
if (! (cflags & PARENB))
/* No parity check/generation. */
new_config |= NB85E_UART_ASIM_PS_NONE;
else if (cflags & PARODD)
/* Odd parity check/generation. */
new_config |= NB85E_UART_ASIM_PS_ODD;
else
/* Even parity check/generation. */
new_config |= NB85E_UART_ASIM_PS_EVEN;
if (cflags & CREAD)
/* Reading enabled. */
new_config |= NB85E_UART_ASIM_RXE;
new_config |= NB85E_UART_ASIM_TXE; /* Writing is always enabled. */
new_config |= NB85E_UART_ASIM_CAE;
new_config |= NB85E_UART_ASIM_ISRM; /* Errors generate a read-irq. */
/* Disable interrupts while we're twiddling the hardware. */
local_irq_save (flags);
#ifdef NB85E_UART_PRE_CONFIGURE
NB85E_UART_PRE_CONFIGURE (chan, cflags, baud);
#endif
old_config = NB85E_UART_ASIM (chan);
old_clk_divlog2 = NB85E_UART_CKSR (chan);
old_brgen_count = NB85E_UART_BRGC (chan);
if (new_clk_divlog2 != old_clk_divlog2
|| new_brgen_count != old_brgen_count)
{
/* The baud rate has changed. First, disable the UART. */
NB85E_UART_ASIM (chan) = 0;
old_config = 0;
/* Reprogram the baud-rate generator. */
NB85E_UART_CKSR (chan) = new_clk_divlog2;
NB85E_UART_BRGC (chan) = new_brgen_count;
}
if (! (old_config & NB85E_UART_ASIM_CAE)) {
/* If we are enabling the uart for the first time, start
by turning on the enable bit, which must be done
before turning on any other bits. */
NB85E_UART_ASIM (chan) = NB85E_UART_ASIM_CAE;
/* Enabling the uart also resets it. */
old_config = NB85E_UART_ASIM_CAE;
}
if (new_config != old_config) {
/* Which of the TXE/RXE bits we'll temporarily turn off
before changing other control bits. */
unsigned temp_disable = 0;
/* Which of the TXE/RXE bits will be enabled. */
unsigned enable = 0;
unsigned changed_bits = new_config ^ old_config;
/* Which of RX/TX will be enabled in the new configuration. */
if (new_config & RX_BITS)
enable |= (new_config & NB85E_UART_ASIM_RXE);
if (new_config & TX_BITS)
enable |= (new_config & NB85E_UART_ASIM_TXE);
/* Figure out which of RX/TX needs to be disabled; note
that this will only happen if they're not already
disabled. */
if (changed_bits & RX_BITS)
temp_disable |= (old_config & NB85E_UART_ASIM_RXE);
if (changed_bits & TX_BITS)
temp_disable |= (old_config & NB85E_UART_ASIM_TXE);
/* We have to turn off RX and/or TX mode before changing
any associated control bits. */
if (temp_disable)
NB85E_UART_ASIM (chan) = old_config & ~temp_disable;
/* Write the new control bits, while RX/TX are disabled. */
if (changed_bits & ~enable)
NB85E_UART_ASIM (chan) = new_config & ~enable;
/* The UART may not be reset properly unless we
wait at least 2 `basic-clocks' until turning
on the TXE/RXE bits again. A `basic clock'
is the clock used by the baud-rate generator, i.e.,
the cpu clock divided by the 2^new_clk_divlog2. */
nb85e_uart_delay (1 << (new_clk_divlog2 + 1));
/* Write the final version, with enable bits turned on. */
NB85E_UART_ASIM (chan) = new_config;
}
local_irq_restore (flags);
}
/* Low-level console. */
#ifdef CONFIG_V850E_NB85E_UART_CONSOLE
static void nb85e_uart_cons_write (struct console *co,
const char *s, unsigned count)
{
if (count > 0) {
unsigned chan = co->index;
unsigned irq = IRQ_INTST (chan);
int irq_was_enabled, irq_was_pending, flags;
/* We don't want to get `transmission completed' (INTST)
interrupts, since we're busy-waiting, so we disable
them while sending (we don't disable interrupts
entirely because sending over a serial line is really
slow). We save the status of INTST and restore it
when we're done so that using printk doesn't
interfere with normal serial transmission (other than
interleaving the output, of course!). This should
work correctly even if this function is interrupted
and the interrupt printks something. */
/* Disable interrupts while fiddling with INTST. */
local_irq_save (flags);
/* Get current INTST status. */
irq_was_enabled = nb85e_intc_irq_enabled (irq);
irq_was_pending = nb85e_intc_irq_pending (irq);
/* Disable INTST if necessary. */
if (irq_was_enabled)
nb85e_intc_disable_irq (irq);
/* Turn interrupts back on. */
local_irq_restore (flags);
/* Send characters. */
while (count > 0) {
int ch = *s++;
if (ch == '\n') {
/* We don't have the benefit of a tty
driver, so translate NL into CR LF. */
nb85e_uart_wait_for_xmit_ok (chan);
nb85e_uart_putc (chan, '\r');
}
nb85e_uart_wait_for_xmit_ok (chan);
nb85e_uart_putc (chan, ch);
count--;
}
/* Restore saved INTST status. */
if (irq_was_enabled) {
/* Wait for the last character we sent to be
completely transmitted (as we'll get an INTST
interrupt at that point). */
nb85e_uart_wait_for_xmit_done (chan);
/* Clear pending interrupts received due
to our transmission, unless there was already
one pending, in which case we want the
handler to be called. */
if (! irq_was_pending)
nb85e_intc_clear_pending_irq (irq);
/* ... and then turn back on handling. */
nb85e_intc_enable_irq (irq);
}
}
}
static kdev_t nb85e_uart_cons_device (struct console *c)
{
return mk_kdev (TTY_MAJOR, NB85E_UART_MINOR_BASE + c->index);
}
static struct console nb85e_uart_cons =
{
name: "ttyS",
write: nb85e_uart_cons_write,
device: nb85e_uart_cons_device,
flags: CON_PRINTBUFFER,
cflag: NB85E_UART_INIT_CFLAGS,
index: -1,
};
void nb85e_uart_cons_init (unsigned chan)
{
nb85e_uart_configure (chan, NB85E_UART_INIT_CFLAGS,
NB85E_UART_INIT_BAUD);
nb85e_uart_cons.index = chan;
register_console (&nb85e_uart_cons);
printk ("Console: %s on-chip UART channel %d\n",
NB85E_UART_CHIP_NAME, chan);
}
#define NB85E_UART_CONSOLE &nb85e_uart_cons
#else /* !CONFIG_V850E_NB85E_UART_CONSOLE */
#define NB85E_UART_CONSOLE 0
#endif /* CONFIG_V850E_NB85E_UART_CONSOLE */
/* TX/RX interrupt handlers. */
static void nb85e_uart_stop_tx (struct uart_port *port, unsigned tty_stop);
void nb85e_uart_tx (struct uart_port *port)
{
struct circ_buf *xmit = &port->info->xmit;
int stopped = uart_tx_stopped (port);
if (nb85e_uart_xmit_ok (port->line)) {
int tx_ch;
if (port->x_char) {
tx_ch = port->x_char;
port->x_char = 0;
} else if (!uart_circ_empty (xmit) && !stopped) {
tx_ch = xmit->buf[xmit->tail];
xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
} else
goto no_xmit;
nb85e_uart_putc (port->line, tx_ch);
port->icount.tx++;
if (uart_circ_chars_pending (xmit) < WAKEUP_CHARS)
uart_event (port, EVT_WRITE_WAKEUP);
}
no_xmit:
if (uart_circ_empty (xmit) || stopped)
nb85e_uart_stop_tx (port, stopped);
}
static void nb85e_uart_tx_irq (int irq, void *data, struct pt_regs *regs)
{
struct uart_port *port = data;
nb85e_uart_tx (port);
}
static void nb85e_uart_rx_irq (int irq, void *data, struct pt_regs *regs)
{
struct uart_port *port = data;
unsigned ch_stat = TTY_NORMAL;
unsigned ch = NB85E_UART_RXB (port->line);
unsigned err = NB85E_UART_ASIS (port->line);
if (err) {
if (err & NB85E_UART_ASIS_OVE) {
ch_stat = TTY_OVERRUN;
port->icount.overrun++;
} else if (err & NB85E_UART_ASIS_FE) {
ch_stat = TTY_FRAME;
port->icount.frame++;
} else if (err & NB85E_UART_ASIS_PE) {
ch_stat = TTY_PARITY;
port->icount.parity++;
}
}
port->icount.rx++;
tty_insert_flip_char (port->info->tty, ch, ch_stat);
tty_schedule_flip (port->info->tty);
}
/* Control functions for the serial framework. */
static void nb85e_uart_nop (struct uart_port *port) { }
static int nb85e_uart_success (struct uart_port *port) { return 0; }
static unsigned nb85e_uart_tx_empty (struct uart_port *port)
{
return TIOCSER_TEMT; /* Can't detect. */
}
static void nb85e_uart_set_mctrl (struct uart_port *port, unsigned mctrl)
{
#ifdef NB85E_UART_SET_RTS
NB85E_UART_SET_RTS (port->line, (mctrl & TIOCM_RTS));
#endif
}
static unsigned nb85e_uart_get_mctrl (struct uart_port *port)
{
/* We don't support DCD or DSR, so consider them permanently active. */
int mctrl = TIOCM_CAR | TIOCM_DSR;
/* We may support CTS. */
#ifdef NB85E_UART_CTS
mctrl |= NB85E_UART_CTS(port->line) ? TIOCM_CTS : 0;
#else
mctrl |= TIOCM_CTS;
#endif
return mctrl;
}
static void nb85e_uart_start_tx (struct uart_port *port, unsigned tty_start)
{
nb85e_intc_disable_irq (IRQ_INTST (port->line));
nb85e_uart_tx (port);
nb85e_intc_enable_irq (IRQ_INTST (port->line));
}
static void nb85e_uart_stop_tx (struct uart_port *port, unsigned tty_stop)
{
nb85e_intc_disable_irq (IRQ_INTST (port->line));
}
static void nb85e_uart_start_rx (struct uart_port *port)
{
nb85e_intc_enable_irq (IRQ_INTSR (port->line));
}
static void nb85e_uart_stop_rx (struct uart_port *port)
{
nb85e_intc_disable_irq (IRQ_INTSR (port->line));
}
static void nb85e_uart_break_ctl (struct uart_port *port, int break_ctl)
{
/* Umm, do this later. */
}
static int nb85e_uart_startup (struct uart_port *port)
{
int err;
/* Alloc RX irq. */
err = request_irq (IRQ_INTSR (port->line), nb85e_uart_rx_irq,
SA_INTERRUPT, "nb85e_uart", port);
if (err)
return err;
/* Alloc TX irq. */
err = request_irq (IRQ_INTST (port->line), nb85e_uart_tx_irq,
SA_INTERRUPT, "nb85e_uart", port);
if (err) {
free_irq (IRQ_INTSR (port->line), port);
return err;
}
nb85e_uart_start_rx (port);
return 0;
}
static void nb85e_uart_shutdown (struct uart_port *port)
{
/* Disable port interrupts. */
free_irq (IRQ_INTST (port->line), port);
free_irq (IRQ_INTSR (port->line), port);
/* Turn off xmit/recv enable bits. */
NB85E_UART_ASIM (port->line)
&= ~(NB85E_UART_ASIM_TXE | NB85E_UART_ASIM_RXE);
/* Then reset the channel. */
NB85E_UART_ASIM (port->line) = 0;
}
static void
nb85e_uart_change_speed (struct uart_port *port, unsigned cflags,
unsigned iflag, unsigned quot)
{
/* The serial framework doesn't give us the baud rate directly, but
insists on calculating a `quotient' from it, and giving us that
instead. Get the real baud rate from the tty code instead. */
int baud = tty_get_baud_rate (port->info->tty);
nb85e_uart_configure (port->line, cflags, baud);
}
static const char *nb85e_uart_type (struct uart_port *port)
{
return port->type == PORT_NB85E_UART ? "nb85e_uart" : 0;
}
static void nb85e_uart_config_port (struct uart_port *port, int flags)
{
if (flags & UART_CONFIG_TYPE)
port->type = PORT_NB85E_UART;
}
static int
nb85e_uart_verify_port (struct uart_port *port, struct serial_struct *ser)
{
if (ser->type != PORT_UNKNOWN && ser->type != PORT_NB85E_UART)
return -EINVAL;
if (ser->irq != IRQ_INTST (port->line))
return -EINVAL;
return 0;
}
static struct uart_ops nb85e_uart_ops = {
.tx_empty = nb85e_uart_tx_empty,
.get_mctrl = nb85e_uart_get_mctrl,
.set_mctrl = nb85e_uart_set_mctrl,
.start_tx = nb85e_uart_start_tx,
.stop_tx = nb85e_uart_stop_tx,
.stop_rx = nb85e_uart_stop_rx,
.enable_ms = nb85e_uart_nop,
.break_ctl = nb85e_uart_break_ctl,
.startup = nb85e_uart_startup,
.shutdown = nb85e_uart_shutdown,
.change_speed = nb85e_uart_change_speed,
.type = nb85e_uart_type,
.release_port = nb85e_uart_nop,
.request_port = nb85e_uart_success,
.config_port = nb85e_uart_config_port,
.verify_port = nb85e_uart_verify_port,
};
/* Initialization and cleanup. */
static struct uart_driver nb85e_uart_driver = {
.owner = THIS_MODULE,
.driver_name = "nb85e_uart",
#ifdef CONFIG_DEVFS_FS
.dev_name = "tts/%d",
#else
.dev_name = "ttyS",
#endif
.major = TTY_MAJOR,
.minor = NB85E_UART_MINOR_BASE,
.nr = NB85E_UART_NUM_CHANNELS,
.cons = NB85E_UART_CONSOLE,
};
static struct uart_port nb85e_uart_ports[NB85E_UART_NUM_CHANNELS];
static int __init nb85e_uart_init (void)
{
int rval;
printk (KERN_INFO "%s on-chip UART\n", NB85E_UART_CHIP_NAME);
rval = uart_register_driver (&nb85e_uart_driver);
if (rval == 0) {
unsigned chan;
for (chan = 0; chan < NB85E_UART_NUM_CHANNELS; chan++) {
int cksr_min;
struct uart_port *port = &nb85e_uart_ports[chan];
memset (port, 0, sizeof *port);
port->ops = &nb85e_uart_ops;
port->line = chan;
port->iotype = SERIAL_IO_MEM;
port->flags = UPF_BOOT_AUTOCONF;
/* We actually use multiple IRQs, but the serial
framework seems to mainly use this for
informational purposes anyway. Here we use the TX
irq. */
port->irq = IRQ_INTST (chan);
/* The serial framework doesn't really use these
membase/mapbase fields for anything useful, but
it requires that they be something non-zero to
consider the port `valid', and also uses them
for informational purposes. */
port->membase = (void *)NB85E_UART_BASE_ADDR (chan);
port->mapbase = NB85E_UART_BASE_ADDR (chan);
/* The framework insists on knowing the uart's master
clock freq, though it doesn't seem to do anything
useful for us with it. We must make it at least
higher than (the maximum baud rate * 16), otherwise
the framework will puke during its internal
calculations, and force the baud rate to be 9600.
To be accurate though, just repeat the calculation
we use when actually setting the speed. */
cksr_min = 0;
while ((NB85E_UART_BASE_FREQ >> cksr_min)
> NB85E_UART_CKSR_MAX_FREQ)
cksr_min++;
/* The `* 8' means `* 16 / 2': 16 to account for for
the serial framework's built-in bias, and 2 because
there's an additional / 2 in the hardware. */
port->uartclk = (NB85E_UART_BASE_FREQ >> cksr_min) * 8;
uart_add_one_port (&nb85e_uart_driver, port);
}
}
return rval;
}
static void __exit nb85e_uart_exit (void)
{
unsigned chan;
for (chan = 0; chan < NB85E_UART_NUM_CHANNELS; chan++)
uart_remove_one_port (&nb85e_uart_driver,
&nb85e_uart_ports[chan]);
uart_unregister_driver (&nb85e_uart_driver);
}
module_init (nb85e_uart_init);
module_exit (nb85e_uart_exit);
EXPORT_NO_SYMBOLS;
MODULE_AUTHOR ("Miles Bader");
MODULE_DESCRIPTION ("NEC " NB85E_UART_CHIP_NAME " on-chip UART");
MODULE_LICENSE ("GPL");
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7