Commit 086e9074 authored by Rob Herring's avatar Rob Herring

dt-bindings: Remove more cases of 'allOf' containing a '$ref'

Another round of 'allOf' removals that came in this cycle.

json-schema versions draft7 and earlier have a weird behavior in that
any keywords combined with a '$ref' are ignored (silently). The correct
form was to put a '$ref' under an 'allOf'. This behavior is now changed
in the 2019-09 json-schema spec and '$ref' can be mixed with other
keywords. The json-schema library doesn't yet support this, but the
tooling now does a fixup for this and either way works.

This has been a constant source of review comments, so let's change this
treewide so everyone copies the simpler syntax.
Signed-off-by: default avatarRob Herring <robh@kernel.org>
parent 2dca74a4
......@@ -85,9 +85,8 @@ properties:
CPU power good signal from external PMIC to PMC is enabled.
nvidia,suspend-mode:
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
- enum: [0, 1, 2]
$ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1, 2]
description:
The suspend mode that the platform should use.
Mode 0 is for LP0, CPU + Core voltage off and DRAM in self-refresh
......
......@@ -40,28 +40,25 @@ properties:
calxeda,led-order:
description: Maps port numbers to offsets within the SGPIO bitstream.
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32-array
- minItems: 1
maxItems: 8
$ref: /schemas/types.yaml#/definitions/uint32-array
minItems: 1
maxItems: 8
calxeda,port-phys:
description: |
phandle-combophy and lane assignment, which maps each SATA port to a
combophy and a lane within that combophy
allOf:
- $ref: /schemas/types.yaml#/definitions/phandle-array
- minItems: 1
maxItems: 8
$ref: /schemas/types.yaml#/definitions/phandle-array
minItems: 1
maxItems: 8
calxeda,tx-atten:
description: |
Contains TX attenuation override codes, one per port.
The upper 24 bits of each entry are always 0 and thus ignored.
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32-array
- minItems: 1
maxItems: 8
$ref: /schemas/types.yaml#/definitions/uint32-array
minItems: 1
maxItems: 8
calxeda,sgpio-gpio:
description: |
......
......@@ -63,11 +63,10 @@ patternProperties:
snps,nr-gpios:
description: The number of GPIO pins exported by the port.
$ref: /schemas/types.yaml#/definitions/uint32
default: 32
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
- minimum: 1
maximum: 32
minimum: 1
maximum: 32
interrupts:
description: |
......
......@@ -67,8 +67,7 @@ properties:
1 - direct_sync
2 - scaled_sync
3 - pulse_sync
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
$ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 3
......
......@@ -25,9 +25,8 @@ properties:
amstaos,cover-comp-gain:
description: Multiplier for gain compensation
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
- enum: [1, 16]
$ref: /schemas/types.yaml#/definitions/uint32
enum: [1, 16]
required:
- compatible
......
......@@ -40,10 +40,9 @@ properties:
posed on channels 6 and 7 by Hall-effect sensing.
azoteq,suspend-mode:
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
- enum: [0, 1, 2, 3]
default: 0
$ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1, 2, 3]
default: 0
description: |
Specifies the power mode during suspend as follows:
0: Automatic (same as normal runtime, i.e. suspend/resume disabled)
......@@ -56,11 +55,10 @@ properties:
description: Divides the device's core clock by a factor of 4.
azoteq,ulp-update:
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
- minimum: 0
maximum: 7
default: 3
$ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 7
default: 3
description: Specifies the ultra-low-power mode update rate.
azoteq,reseed-offset:
......@@ -70,34 +68,30 @@ properties:
reseed events.
azoteq,filt-str-lp-lta:
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
- enum: [0, 1, 2, 3]
default: 0
$ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1, 2, 3]
default: 0
description:
Specifies the long-term average filter strength during low-power mode.
azoteq,filt-str-lp-cnt:
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
- enum: [0, 1, 2, 3]
default: 0
$ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1, 2, 3]
default: 0
description:
Specifies the raw count filter strength during low-power mode.
azoteq,filt-str-np-lta:
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
- enum: [0, 1, 2, 3]
default: 0
$ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1, 2, 3]
default: 0
description:
Specifies the long-term average filter strength during normal-power mode.
azoteq,filt-str-np-cnt:
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
- enum: [0, 1, 2, 3]
default: 0
$ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1, 2, 3]
default: 0
description:
Specifies the raw count filter strength during normal-power mode.
......@@ -156,11 +150,10 @@ properties:
description: Disables all raw count filtering.
azoteq,gpio3-select:
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
- minimum: 0
maximum: 7
default: 0
$ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 7
default: 0
description:
Selects the channel for which the GPIO3 pin represents touch state.
......@@ -172,10 +165,9 @@ properties:
in either direction.
azoteq,tx-freq:
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
- enum: [0, 1, 2, 3]
default: 0
$ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1, 2, 3]
default: 0
description: |
Specifies the inductive sensing excitation frequency as follows (paren-
thesized numbers represent the frequency if 'azoteq,clk-div' is present):
......@@ -189,10 +181,9 @@ properties:
description: Increases the global capacitance adder from 0.5 pF to 1.5 pF.
azoteq,reseed-select:
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
- enum: [0, 1, 2, 3]
default: 0
$ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1, 2, 3]
default: 0
description: |
Specifies the event(s) that prompt the device to reseed (i.e. reset the
long-term average) of an associated channel as follows:
......@@ -208,10 +199,9 @@ properties:
channels.
azoteq,filt-str-slider:
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
- enum: [0, 1, 2, 3]
default: 1
$ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1, 2, 3]
default: 1
description: Specifies the slider coordinate filter strength.
patternProperties:
......@@ -246,27 +236,25 @@ patternProperties:
description: Specifies that the channel participates in slider 1.
azoteq,rx-enable:
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32-array
- minItems: 1
maxItems: 8
items:
minimum: 0
maximum: 7
$ref: /schemas/types.yaml#/definitions/uint32-array
minItems: 1
maxItems: 8
items:
minimum: 0
maximum: 7
description:
Specifies the CRX pin(s) associated with the channel. By default, only
the CRX pin corresponding to the channel's index is enabled (e.g. CRX0
for channel 0).
azoteq,tx-enable:
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32-array
- minItems: 1
maxItems: 8
items:
minimum: 0
maximum: 7
default: [0, 1, 2, 3, 4, 5, 6, 7]
$ref: /schemas/types.yaml#/definitions/uint32-array
minItems: 1
maxItems: 8
items:
minimum: 0
maximum: 7
default: [0, 1, 2, 3, 4, 5, 6, 7]
description: Specifies the TX pin(s) associated with the channel.
azoteq,meas-cap-decrease:
......@@ -279,10 +267,9 @@ patternProperties:
description: Floats any inactive CRX pins instead of grounding them.
azoteq,local-cap-size:
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
- enum: [0, 1, 2]
default: 0
$ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1, 2]
default: 0
description: |
Specifies the capacitance to be added to the channel as follows:
0: None
......@@ -296,10 +283,9 @@ patternProperties:
deep-touch events relative to their respective thresholds.
azoteq,proj-bias:
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
- enum: [0, 1, 2, 3]
default: 2
$ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1, 2, 3]
default: 2
description: |
Specifies the bias current applied during projected-capacitance
sensing as follows:
......@@ -309,10 +295,9 @@ patternProperties:
3: 20 uA
azoteq,sense-mode:
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
- enum: [0, 1, 9, 14, 15]
default: 0
$ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1, 9, 14, 15]
default: 0
description: |
Specifies the channel's sensing mode as follows:
0: Self capacitance
......@@ -322,10 +307,9 @@ patternProperties:
15: Temperature
azoteq,sense-freq:
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
- enum: [0, 1, 2, 3]
default: 1
$ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1, 2, 3]
default: 1
description: |
Specifies the channel's sensing frequency as follows (parenthesized
numbers represent the frequency if 'azoteq,clk-div' is present):
......@@ -339,10 +323,9 @@ patternProperties:
description: Enables the static front-end for the channel.
azoteq,ati-mode:
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
- enum: [0, 1, 2, 3]
default: 3
$ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1, 2, 3]
default: 3
description: |
Specifies the channel's ATI mode as follows:
0: Disabled
......@@ -351,39 +334,35 @@ patternProperties:
3: Full
azoteq,ati-base:
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
- enum: [75, 100, 150, 200]
default: 100
$ref: /schemas/types.yaml#/definitions/uint32
enum: [75, 100, 150, 200]
default: 100
description: Specifies the channel's ATI base.
azoteq,ati-target:
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
- multipleOf: 32
minimum: 0
maximum: 2016
default: 512
$ref: /schemas/types.yaml#/definitions/uint32
multipleOf: 32
minimum: 0
maximum: 2016
default: 512
description: Specifies the channel's ATI target.
azoteq,assoc-select:
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32-array
- minItems: 1
maxItems: 8
items:
minimum: 0
maximum: 7
$ref: /schemas/types.yaml#/definitions/uint32-array
minItems: 1
maxItems: 8
items:
minimum: 0
maximum: 7
description:
Specifies the associated channels for which the channel serves as a
reference channel. By default, no channels are selected.
azoteq,assoc-weight:
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
- minimum: 0
maximum: 255
default: 0
$ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 255
default: 0
description:
Specifies the channel's impact weight if it acts as an associated
channel (0 = 0% impact, 255 = 200% impact).
......@@ -411,11 +390,10 @@ patternProperties:
properties:
azoteq,thresh:
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
- minimum: 0
maximum: 255
default: 10
$ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 255
default: 10
description: Specifies the threshold for the event.
linux,code:
......@@ -430,19 +408,17 @@ patternProperties:
properties:
azoteq,thresh:
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
- minimum: 0
maximum: 255
default: 8
$ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 255
default: 8
description: Specifies the threshold for the event.
azoteq,hyst:
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
- minimum: 0
maximum: 15
default: 4
$ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 15
default: 4
description: Specifies the hysteresis for the event.
linux,code:
......@@ -457,19 +433,17 @@ patternProperties:
properties:
azoteq,thresh:
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
- minimum: 0
maximum: 255
default: 26
$ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 255
default: 26
description: Specifies the threshold for the event.
azoteq,hyst:
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
- minimum: 0
maximum: 15
default: 0
$ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 15
default: 0
description: Specifies the hysteresis for the event.
linux,code:
......
......@@ -25,19 +25,17 @@ properties:
description:
u32 value of the base of parent HyperTransport vector allocated
to PCH MSI.
allOf:
- $ref: "/schemas/types.yaml#/definitions/uint32"
- minimum: 0
maximum: 255
$ref: "/schemas/types.yaml#/definitions/uint32"
minimum: 0
maximum: 255
loongson,msi-num-vecs:
description:
u32 value of the number of parent HyperTransport vectors allocated
to PCH MSI.
allOf:
- $ref: "/schemas/types.yaml#/definitions/uint32"
- minimum: 1
maximum: 256
$ref: "/schemas/types.yaml#/definitions/uint32"
minimum: 1
maximum: 256
msi-controller: true
......
......@@ -25,10 +25,9 @@ properties:
description:
u32 value of the base of parent HyperTransport vector allocated
to PCH PIC.
allOf:
- $ref: "/schemas/types.yaml#/definitions/uint32"
- minimum: 0
maximum: 192
$ref: "/schemas/types.yaml#/definitions/uint32"
minimum: 0
maximum: 192
interrupt-controller: true
......
......@@ -31,9 +31,8 @@ properties:
reg-size:
description: The access width of the register in bytes. Defaults to 1.
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
- enum: [1, 2, 4, 8]
$ref: /schemas/types.yaml#/definitions/uint32
enum: [1, 2, 4, 8]
reg-spacing:
$ref: /schemas/types.yaml#/definitions/uint32
......@@ -43,9 +42,8 @@ properties:
description: |
The amount of bits to shift the register content to the right to get
the data into bit zero.
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
- maximum: 56
$ref: /schemas/types.yaml#/definitions/uint32
maximum: 56
required:
- compatible
......
......@@ -57,8 +57,7 @@ properties:
description: |
mA; per-string current limit.
This property is supported only for WLED3.
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
$ref: /schemas/types.yaml#/definitions/uint32
default: 20
minimum: 0
maximum: 25
......@@ -74,38 +73,33 @@ properties:
qcom,current-boost-limit:
description: |
mA; boost current limit.
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
$ref: /schemas/types.yaml#/definitions/uint32
qcom,switching-freq:
description: |
kHz; switching frequency.
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
- enum: [ 600, 640, 685, 738, 800, 872, 960, 1066, 1200, 1371, 1600, 1920, 2400, 3200, 4800, 9600 ]
$ref: /schemas/types.yaml#/definitions/uint32
enum: [ 600, 640, 685, 738, 800, 872, 960, 1066, 1200, 1371, 1600, 1920, 2400, 3200, 4800, 9600 ]
qcom,ovp:
description: |
V; Over-voltage protection limit.
This property is supported only for WLED3.
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
- enum: [ 27, 29, 32, 35 ]
- default: 29
$ref: /schemas/types.yaml#/definitions/uint32
enum: [ 27, 29, 32, 35 ]
default: 29
qcom,ovp-millivolt:
description: |
Over-voltage protection limit. This property is for WLED4 only.
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
- enum: [ 18100, 19600, 29600, 31100 ]
- default: 29600
$ref: /schemas/types.yaml#/definitions/uint32
enum: [ 18100, 19600, 29600, 31100 ]
default: 29600
qcom,num-strings:
description: |
number of led strings attached.
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
$ref: /schemas/types.yaml#/definitions/uint32
qcom,enabled-strings:
description: |
......@@ -113,8 +107,7 @@ properties:
string of leds are operated individually. Specify the
list of strings used by the device. Any combination of
led strings can be used.
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32-array
$ref: /schemas/types.yaml#/definitions/uint32-array
minItems: 1
maxItems: 4
......@@ -150,10 +143,9 @@ properties:
0 - Modulator A
1 - Modulator B
This property is applicable only to WLED5 peripheral.
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
- enum: [ 0, 1 ]
- default: 0
$ref: /schemas/types.yaml#/definitions/uint32
enum: [ 0, 1 ]
default: 0
qcom,cabc-sel:
description: |
......@@ -164,9 +156,8 @@ properties:
2 - CABC 2
3 - External signal (e.g. LPG) is used for dimming
This property is applicable only to WLED5 peripheral.
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
- enum: [ 0, 1, 2, 3 ]
$ref: /schemas/types.yaml#/definitions/uint32
enum: [ 0, 1, 2, 3 ]
allOf:
- if:
......
......@@ -32,8 +32,7 @@ properties:
patternProperties:
"^led@[0-2]$":
type: object
allOf:
- $ref: common.yaml#
$ref: common.yaml#
properties:
reg:
......
......@@ -33,8 +33,7 @@ properties:
led:
type: object
allOf:
- $ref: common.yaml#
$ref: common.yaml#
required:
- compatible
......
......@@ -79,8 +79,7 @@ properties:
- const: 4
link-frequencies:
allOf:
- $ref: /schemas/types.yaml#/definitions/uint64-array
$ref: /schemas/types.yaml#/definitions/uint64-array
description:
Allowed data bus frequencies. 360000000, 180000000 Hz or both
are supported by the driver.
......
......@@ -45,9 +45,8 @@ patternProperties:
maxItems: 255
ingenic,nemc-bus-width:
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
- enum: [8, 16]
$ref: /schemas/types.yaml#/definitions/uint32
enum: [8, 16]
description: Specifies the bus width in bits.
ingenic,nemc-tAS:
......
......@@ -145,8 +145,7 @@ patternProperties:
"^cpts@[0-9a-f]+":
type: object
allOf:
- $ref: "ti,k3-am654-cpts.yaml#"
$ref: "ti,k3-am654-cpts.yaml#"
description:
CPSW Common Platform Time Sync (CPTS) module.
......
......@@ -74,15 +74,13 @@ properties:
- const: cpts
ti,cpts-ext-ts-inputs:
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
$ref: /schemas/types.yaml#/definitions/uint32
maximum: 8
description:
Number of hardware timestamp push inputs (HWx_TS_PUSH)
ti,cpts-periodic-outputs:
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
$ref: /schemas/types.yaml#/definitions/uint32
maximum: 8
description:
Number of timestamp Generator function outputs (TS_GENFx)
......
......@@ -15,8 +15,7 @@ allOf:
properties:
cdns,max-outbound-regions:
description: maximum number of outbound regions
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
$ref: /schemas/types.yaml#/definitions/uint32
minimum: 1
maximum: 32
default: 32
......
......@@ -16,8 +16,7 @@ allOf:
properties:
cdns,max-outbound-regions:
description: maximum number of outbound regions
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
$ref: /schemas/types.yaml#/definitions/uint32
minimum: 1
maximum: 32
default: 32
......
......@@ -29,9 +29,8 @@ properties:
phydev:
description: device ID for programming the ComboPHY.
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
- maximum: 31
$ref: /schemas/types.yaml#/definitions/uint32
maximum: 31
required:
- compatible
......
......@@ -52,9 +52,8 @@ properties:
description: |
Enable/disable spread spectrum clock (ssc). 0 or the property doesn't
exist means disabling the ssc. The actual value will be -<value> ppm.
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
- enum: [ 0, 4003, 4492, 4980 ]
$ref: /schemas/types.yaml#/definitions/uint32
enum: [ 0, 4003, 4492, 4980 ]
required:
- compatible
......
......@@ -27,11 +27,9 @@ properties:
of this binary blob is kept secret by CellWise. The only way to obtain
it is to mail two batteries to a test facility of CellWise and receive
back a test report with the binary blob.
allOf:
- $ref: /schemas/types.yaml#definitions/uint8-array
items:
- minItems: 64
maxItems: 64
$ref: /schemas/types.yaml#definitions/uint8-array
minItems: 64
maxItems: 64
cellwise,monitor-interval-ms:
description:
......@@ -41,10 +39,9 @@ properties:
power-supplies:
description:
Specifies supplies used for charging the battery connected to this gauge
allOf:
- $ref: /schemas/types.yaml#/definitions/phandle-array
- minItems: 1
maxItems: 8 # Should be enough
$ref: /schemas/types.yaml#/definitions/phandle-array
minItems: 1
maxItems: 8 # Should be enough
monitored-battery:
description:
......
......@@ -32,16 +32,14 @@ properties:
description:
The number of times to retry I2C transactions on I2C IO failure.
default: 0
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
$ref: /schemas/types.yaml#/definitions/uint32
sbs,poll-retry-count:
description:
The number of times to try looking for new status after an external
change notification.
default: 0
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
$ref: /schemas/types.yaml#/definitions/uint32
sbs,battery-detect-gpios:
description:
......
......@@ -21,8 +21,7 @@ properties:
regulators:
type: object
allOf:
- $ref: regulator.yaml#
$ref: regulator.yaml#
description: |
list of regulators provided by this controller, must be named
after their hardware counterparts LDO[1-15], BUCK and BUCKBOOST
......@@ -30,13 +29,11 @@ properties:
patternProperties:
"^LDO([1-9]|1[0-5])$":
type: object
allOf:
- $ref: regulator.yaml#
$ref: regulator.yaml#
"^BUCK|BUCKBOOST$":
type: object
allOf:
- $ref: regulator.yaml#
$ref: regulator.yaml#
additionalProperties: false
......
......@@ -29,8 +29,7 @@ description: |
patternProperties:
"^LDO[1-6]$":
type: object
allOf:
- $ref: regulator.yaml#
$ref: regulator.yaml#
description:
Properties for single LDO regulator.
......@@ -44,8 +43,7 @@ patternProperties:
"^BUCK[1-6]$":
type: object
allOf:
- $ref: regulator.yaml#
$ref: regulator.yaml#
description:
Properties for single BUCK regulator.
......@@ -56,28 +54,25 @@ patternProperties:
should be "buck1", ..., "buck6"
rohm,dvs-run-voltage:
allOf:
- $ref: "/schemas/types.yaml#/definitions/uint32"
- minimum: 0
maximum: 1300000
$ref: "/schemas/types.yaml#/definitions/uint32"
minimum: 0
maximum: 1300000
description:
PMIC default "RUN" state voltage in uV. See below table for
bucks which support this. 0 means disabled.
rohm,dvs-idle-voltage:
allOf:
- $ref: "/schemas/types.yaml#/definitions/uint32"
- minimum: 0
maximum: 1300000
$ref: "/schemas/types.yaml#/definitions/uint32"
minimum: 0
maximum: 1300000
description:
PMIC default "IDLE" state voltage in uV. See below table for
bucks which support this. 0 means disabled.
rohm,dvs-suspend-voltage:
allOf:
- $ref: "/schemas/types.yaml#/definitions/uint32"
- minimum: 0
maximum: 1300000
$ref: "/schemas/types.yaml#/definitions/uint32"
minimum: 0
maximum: 1300000
description:
PMIC default "SUSPEND" state voltage in uV. See below table for
bucks which support this. 0 means disabled.
......
......@@ -28,10 +28,8 @@ properties:
description:
Arm TrustZone CryptoCell TRNG engine has 4 ring oscillators.
Sampling ratio values for these 4 ring oscillators. (from calibration)
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32-array
- items:
maxItems: 4
$ref: /schemas/types.yaml#/definitions/uint32-array
maxItems: 4
clocks:
maxItems: 1
......
......@@ -33,9 +33,8 @@ properties:
description: |
The size (in bytes) of the IO accesses that should be performed
on the device.
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
- enum: [ 1, 4 ]
$ref: /schemas/types.yaml#/definitions/uint32
enum: [ 1, 4 ]
clocks:
minItems: 2
......
......@@ -100,8 +100,7 @@ patternProperties:
supports up to 50MHz, up to four chip selects, programmable
data path from 4 bits to 32 bits and numerous protocol
variants.
allOf:
- $ref: /spi/spi-controller.yaml#
$ref: /spi/spi-controller.yaml#
properties:
compatible:
......@@ -126,8 +125,7 @@ patternProperties:
"i2c@[0-9a-f]+$":
type: object
description: GENI serial engine based I2C controller.
allOf:
- $ref: /schemas/i2c/i2c-controller.yaml#
$ref: /schemas/i2c/i2c-controller.yaml#
properties:
compatible:
......@@ -156,8 +154,7 @@ patternProperties:
"serial@[0-9a-f]+$":
type: object
description: GENI Serial Engine based UART Controller.
allOf:
- $ref: /schemas/serial.yaml#
$ref: /schemas/serial.yaml#
properties:
compatible:
......
......@@ -45,23 +45,20 @@ properties:
- const: ctx3_tx
firmware-name:
allOf:
- $ref: /schemas/types.yaml#/definitions/string
- const: imx/easrc/easrc-imx8mn.bin
$ref: /schemas/types.yaml#/definitions/string
const: imx/easrc/easrc-imx8mn.bin
description: The coefficient table for the filters
fsl,asrc-rate:
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
- minimum: 8000
- maximum: 192000
$ref: /schemas/types.yaml#/definitions/uint32
minimum: 8000
maximum: 192000
description: Defines a mutual sample rate used by DPCM Back Ends
fsl,asrc-format:
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
- enum: [2, 6, 10, 32, 36]
default: 2
$ref: /schemas/types.yaml#/definitions/uint32
enum: [2, 6, 10, 32, 36]
default: 2
description:
Defines a mutual sample format used by DPCM Back Ends
......
......@@ -13,15 +13,13 @@ definitions:
frame-master:
description: Indicates dai-link frame master.
allOf:
- $ref: /schemas/types.yaml#/definitions/phandle-array
- maxItems: 1
$ref: /schemas/types.yaml#/definitions/phandle-array
maxItems: 1
bitclock-master:
description: Indicates dai-link bit clock master
allOf:
- $ref: /schemas/types.yaml#/definitions/phandle-array
- maxItems: 1
$ref: /schemas/types.yaml#/definitions/phandle-array
maxItems: 1
frame-inversion:
description: dai-link uses frame clock inversion
......
......@@ -76,13 +76,12 @@ properties:
PDMIN3 - PDMCLK latching edge used for channel 5 and 6 data
PDMIN4 - PDMCLK latching edge used for channel 7 and 8 data
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32-array
- minItems: 1
maxItems: 4
items:
maximum: 1
default: [0, 0, 0, 0]
$ref: /schemas/types.yaml#/definitions/uint32-array
minItems: 1
maxItems: 4
items:
maximum: 1
default: [0, 0, 0, 0]
ti,gpi-config:
description: |
......@@ -102,13 +101,12 @@ properties:
7 - GPIX is configured as a PDM data input for channel 7 and channel
(PDMDIN4)
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32-array
- minItems: 1
maxItems: 4
items:
maximum: 7
default: [0, 0, 0, 0]
$ref: /schemas/types.yaml#/definitions/uint32-array
minItems: 1
maxItems: 4
items:
maximum: 7
default: [0, 0, 0, 0]
required:
- compatible
......
......@@ -28,9 +28,8 @@ properties:
const: 0
socionext,tmod-calibration:
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32-array
- maxItems: 2
$ref: /schemas/types.yaml#/definitions/uint32-array
maxItems: 2
description:
A pair of calibrated values referred from PVT, in case that the values
aren't set on SoC, like a reference board.
......
......@@ -52,21 +52,18 @@ properties:
vhub-vendor-id:
description: vhub Vendor ID
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
- maximum: 65535
$ref: /schemas/types.yaml#/definitions/uint32
maximum: 65535
vhub-product-id:
description: vhub Product ID
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
- maximum: 65535
$ref: /schemas/types.yaml#/definitions/uint32
maximum: 65535
vhub-device-revision:
description: vhub Device Revision in binary-coded decimal
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
- maximum: 65535
$ref: /schemas/types.yaml#/definitions/uint32
maximum: 65535
vhub-strings:
type: object
......@@ -90,18 +87,15 @@ properties:
manufacturer:
description: vhub manufacturer
allOf:
- $ref: /schemas/types.yaml#/definitions/string
$ref: /schemas/types.yaml#/definitions/string
product:
description: vhub product name
allOf:
- $ref: /schemas/types.yaml#/definitions/string
$ref: /schemas/types.yaml#/definitions/string
serial-number:
description: vhub device serial number
allOf:
- $ref: /schemas/types.yaml#/definitions/string
$ref: /schemas/types.yaml#/definitions/string
required:
- compatible
......
......@@ -17,8 +17,7 @@ properties:
enum:
- arm,smc-wdt
arm,smc-id:
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
$ref: /schemas/types.yaml#/definitions/uint32
description: |
The ATF smc function id used by the firmware.
Defaults to 0x82003D06 if unset.
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment