Merge tag 'acpi-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull ACPI updates from Rafael Wysocki:
 "These are some device enumeration code changes, updates of the AC and
  battery drivers to help them avoid attaching to devices that cannot be
  handled by them, new operation region driver for the Intel CHT Whiskey
  Cove PMIC, new sysfs entries for CPPC performance capabilities, a new
  _REV quirk blacklist entry and a couple of assorted minor fixes and
  cleanups.

  Specifics:

   - Update the core device enumeration code to make it more internally
     consistent and robust and drop the force_remove sysfs attribute
     that could be used to tell it to ignore errors on device
     hot-removal which was dangerous in general and no real and still
     relevant use cases for it could be found (Rafael Wysocki, Michal
     Hocko).

   - Make the core device enumeration code use _PXM to associate
     platform devices created by it with specific NUMA nodes (Shanker
     Donthineni).

   - Extend the CPPC library by adding more sysfs entries for
     performance capabilities to it and making it use the lowest
     nonlinear performance parameter (Prashanth Prakash).

   - Make the CPU online more consistent with CPU initialization in the
     ACPI processor driver (Prashanth Prakash).

   - Update the AC and battery drivers to help them avoid attaching to
     devices that cannot be handled by them and update the
     axp288_charger power supply driver to work correctly on ACPI
     systems without the INT3496 device (Hans de Goede).

   - Add an ACPI operation region driver for the Intel CHT Whiskey Cove
     PMIC and update the xpower operation region driver to work without
     IIO which isn't really necessary for it to work (Hans de Goede).

   - Add a new entry for Dell Inspiron 7537 to the _REV quirk blacklist
     (Kai Heng Feng).

   - Make the code in the ACPI video driver easier to follow by adding
     symbols and comments to it (Dmitry Frank).

   - Update ACPI documentation and drop a function that has no users
     from the tables-handling code (Cao jin, Baoquan He)"

* tag 'acpi-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI / PMIC: Stop xpower OPRegion handler relying on IIO
  ACPI / PMIC: Add opregion driver for Intel CHT Whiskey Cove PMIC
  ACPI / scan: Avoid enumerating devices more than once
  ACPI / scan: Apply default enumeration to devices with ACPI drivers
  power: supply: axp288_charger: Only wait for INT3496 device if present
  ACPI / AC: Add a blacklist with PMIC ACPI HIDs with a native charger driver
  ACPI / battery: Add a blacklist with PMIC ACPI HIDs with a native battery driver
  ACPI / battery: Fix acpi_battery_exit on acpi_battery_init_async errors
  ACPI / utils: Add new acpi_dev_present helper
  ACPI / video: add comments about subtle cases
  ACPI / video: get rid of magic numbers and use enum instead
  ACPI / doc: linuxized-acpica.txt: fix typos
  ACPI / blacklist: add _REV quirk for Dell Inspiron 7537
  ACPI / tables: Drop acpi_parse_entries() which is not used
  ACPI / CPPC: add sysfs entries for CPPC perf capabilities
  ACPI / CPPC: Read lowest nonlinear perf in cppc_get_perf_caps()
  ACPI / platform: Update platform device NUMA node based on _PXM method
  ACPI / Processor: Drop setup_max_cpus check from acpi_processor_add()
  ACPI / scan: Drop support for force_remove

Documentation/ABI/obsolete/sysfs-firmware-acpi

+What:		/sys/firmware/acpi/hotplug/force_remove
+Date:		Mar 2017
+Contact:	Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+Description:
+		Since the force_remove is inherently broken and dangerous to
+		use for some hotplugable resources like memory (because ignoring
+		the offline failure might lead to memory corruption and crashes)
+		enabling this knob is not safe and thus unsupported.

Documentation/ABI/testing/sysfs-firmware-acpi

@@ -44,16 +44,6 @@ Description:
 		or 0 (unset).  Attempts to write any other values to it will
 		cause -EINVAL to be returned.
 
-What:		/sys/firmware/acpi/hotplug/force_remove
-Date:		May 2013
-Contact:	Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-Description:
-		The number in this file (0 or 1) determines whether (1) or not
-		(0) the ACPI subsystem will allow devices to be hot-removed even
-		if they cannot be put offline gracefully (from the kernel's
-		viewpoint).  That number can be changed by writing a boolean
-		value to this file.
-
 What:		/sys/firmware/acpi/interrupts/
 Date:		February 2008
 Contact:	Len Brown <lenb@kernel.org>

Documentation/acpi/linuxized-acpica.txt

@@ -24,7 +24,7 @@ upstream.
    The homepage of ACPICA project is: www.acpica.org, it is maintained and
    supported by Intel Corporation.
 
-   The following figure depicts the Linux ACPI subystem where the ACPICA
+   The following figure depicts the Linux ACPI subsystem where the ACPICA
    adaptation is included:
 
       +---------------------------------------------------------+
@@ -110,7 +110,7 @@ upstream.
    Linux patches.  The patches generated by this process are referred to as
    "linuxized ACPICA patches".  The release process is carried out on a local
    copy the ACPICA git repository.  Each commit in the monthly release is
-   converted into a linuxized ACPICA patch.  Together, they form the montly
+   converted into a linuxized ACPICA patch.  Together, they form the monthly
    ACPICA release patchset for the Linux ACPI community.  This process is
    illustrated in the following figure:
 
@@ -165,7 +165,7 @@ upstream.
        <http://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git>.
 
    Before the linuxized ACPICA patches are sent to the Linux ACPI community
-   for review, there is a quality ensurance build test process to reduce
+   for review, there is a quality assurance build test process to reduce
    porting issues.  Currently this build process only takes care of the
    following kernel configuration options:
    CONFIG_ACPI/CONFIG_ACPI_DEBUG/CONFIG_ACPI_DEBUGGER
@@ -195,12 +195,12 @@ upstream.
       release utilities (please refer to Section 4 below for the details).
    3. Linux specific features - Sometimes it's impossible to use the
       current ACPICA APIs to implement features required by the Linux kernel,
-      so Linux developers occasionaly have to change ACPICA code directly.
+      so Linux developers occasionally have to change ACPICA code directly.
       Those changes may not be acceptable by ACPICA upstream and in such cases
       they are left as committed ACPICA divergences unless the ACPICA side can
       implement new mechanisms as replacements for them.
    4. ACPICA release fixups - ACPICA only tests commits using a set of the
-      user space simulation utilies, thus the linuxized ACPICA patches may
+      user space simulation utilities, thus the linuxized ACPICA patches may
       break the Linux kernel, leaving us build/boot failures.  In order to
       avoid breaking Linux bisection, fixes are applied directly to the
       linuxized ACPICA patches during the release process.  When the release

drivers/acpi/Kconfig

@@ -505,7 +505,7 @@ config CRC_PMIC_OPREGION
 
 config XPOWER_PMIC_OPREGION
 	bool "ACPI operation region support for XPower AXP288 PMIC"
-	depends on AXP288_ADC = y
+	depends on MFD_AXP20X_I2C
 	help
 	  This config adds ACPI operation region support for XPower AXP288 PMIC.
 
@@ -515,6 +515,12 @@ config BXT_WC_PMIC_OPREGION
 	help
 	  This config adds ACPI operation region support for BXT WhiskeyCove PMIC.
 
+config CHT_WC_PMIC_OPREGION
+	bool "ACPI operation region support for CHT Whiskey Cove PMIC"
+	depends on INTEL_SOC_PMIC_CHTWC
+	help
+	  This config adds ACPI operation region support for CHT Whiskey Cove PMIC.
+
 endif
 
 config ACPI_CONFIGFS

drivers/acpi/Makefile

@@ -101,6 +101,7 @@ obj-$(CONFIG_PMIC_OPREGION)	+= pmic/intel_pmic.o
 obj-$(CONFIG_CRC_PMIC_OPREGION) += pmic/intel_pmic_crc.o
 obj-$(CONFIG_XPOWER_PMIC_OPREGION) += pmic/intel_pmic_xpower.o
 obj-$(CONFIG_BXT_WC_PMIC_OPREGION) += pmic/intel_pmic_bxtwc.o
+obj-$(CONFIG_CHT_WC_PMIC_OPREGION) += pmic/intel_pmic_chtwc.o
 
 obj-$(CONFIG_ACPI_CONFIGFS)	+= acpi_configfs.o
 

drivers/acpi/ac.c

@@ -57,12 +57,23 @@ static int acpi_ac_add(struct acpi_device *device);
 static int acpi_ac_remove(struct acpi_device *device);
 static void acpi_ac_notify(struct acpi_device *device, u32 event);
 
+struct acpi_ac_bl {
+	const char *hid;
+	int hrv;
+};
+
 static const struct acpi_device_id ac_device_ids[] = {
 	{"ACPI0003", 0},
 	{"", 0},
 };
 MODULE_DEVICE_TABLE(acpi, ac_device_ids);
 
+/* Lists of PMIC ACPI HIDs with an (often better) native charger driver */
+static const struct acpi_ac_bl acpi_ac_blacklist[] = {
+	{ "INT33F4", -1 }, /* X-Powers AXP288 PMIC */
+	{ "INT34D3",  3 }, /* Intel Cherrytrail Whiskey Cove PMIC */
+};
+
 #ifdef CONFIG_PM_SLEEP
 static int acpi_ac_resume(struct device *dev);
 #endif
@@ -424,11 +435,20 @@ static int acpi_ac_remove(struct acpi_device *device)
 
 static int __init acpi_ac_init(void)
 {
+	unsigned int i;
 	int result;
 
 	if (acpi_disabled)
 		return -ENODEV;
 
+	for (i = 0; i < ARRAY_SIZE(acpi_ac_blacklist); i++)
+		if (acpi_dev_present(acpi_ac_blacklist[i].hid, "1",
+				     acpi_ac_blacklist[i].hrv)) {
+			pr_info(PREFIX "AC: found native %s PMIC, not loading\n",
+				acpi_ac_blacklist[i].hid);
+			return -ENODEV;
+		}
+
 #ifdef CONFIG_ACPI_PROCFS_POWER
 	acpi_ac_dir = acpi_lock_ac_dir();
 	if (!acpi_ac_dir)

drivers/acpi/acpi_platform.c

@@ -121,11 +121,14 @@ struct platform_device *acpi_create_platform_device(struct acpi_device *adev,
 	if (IS_ERR(pdev))
 		dev_err(&adev->dev, "platform device creation failed: %ld\n",
 			PTR_ERR(pdev));
-	else
+	else {
+		set_dev_node(&pdev->dev, acpi_get_node(adev->handle));
 		dev_dbg(&adev->dev, "created platform device %s\n",
 			dev_name(&pdev->dev));
+	}
 
 	kfree(resources);
+
 	return pdev;
 }
 EXPORT_SYMBOL_GPL(acpi_create_platform_device);

drivers/acpi/acpi_processor.c

@@ -388,11 +388,6 @@ static int acpi_processor_add(struct acpi_device *device,
 	if (result) /* Processor is not physically present or unavailable */
 		return 0;
 
-#ifdef CONFIG_SMP
-	if (pr->id >= setup_max_cpus && pr->id != 0)
-		return 0;
-#endif
-
 	BUG_ON(pr->id >= nr_cpu_ids);
 
 	/*

drivers/acpi/acpi_video.c

@@ -73,6 +73,10 @@ module_param(report_key_events, int, 0644);
 MODULE_PARM_DESC(report_key_events,
 	"0: none, 1: output changes, 2: brightness changes, 3: all");
 
+/*
+ * Whether the struct acpi_video_device_attrib::device_id_scheme bit should be
+ * assumed even if not actually set.
+ */
 static bool device_id_scheme = false;
 module_param(device_id_scheme, bool, 0444);
 
@@ -88,6 +92,18 @@ static int acpi_video_bus_remove(struct acpi_device *device);
 static void acpi_video_bus_notify(struct acpi_device *device, u32 event);
 void acpi_video_detect_exit(void);
 
+/*
+ * Indices in the _BCL method response: the first two items are special,
+ * the rest are all supported levels.
+ *
+ * See page 575 of the ACPI spec 3.0
+ */
+enum acpi_video_level_idx {
+	ACPI_VIDEO_AC_LEVEL,		/* level when machine has full power */
+	ACPI_VIDEO_BATTERY_LEVEL,	/* level when machine is on batteries */
+	ACPI_VIDEO_FIRST_LEVEL,		/* actual supported levels begin here */
+};
+
 static const struct acpi_device_id video_device_ids[] = {
 	{ACPI_VIDEO_HID, 0},
 	{"", 0},
@@ -132,7 +148,15 @@ struct acpi_video_device_attrib {
 				   the VGA device. */
 	u32 pipe_id:3;		/* For VGA multiple-head devices. */
 	u32 reserved:10;	/* Must be 0 */
-	u32 device_id_scheme:1;	/* Device ID Scheme */
+
+	/*
+	 * The device ID might not actually follow the scheme described by this
+	 * struct acpi_video_device_attrib. If it does, then this bit
+	 * device_id_scheme is set; otherwise, other fields should be ignored.
+	 *
+	 * (but also see the global flag device_id_scheme)
+	 */
+	u32 device_id_scheme:1;
 };
 
 struct acpi_video_enumerated_device {
@@ -217,20 +241,16 @@ static int acpi_video_get_brightness(struct backlight_device *bd)
 
 	if (acpi_video_device_lcd_get_level_current(vd, &cur_level, false))
 		return -EINVAL;
-	for (i = 2; i < vd->brightness->count; i++) {
+	for (i = ACPI_VIDEO_FIRST_LEVEL; i < vd->brightness->count; i++) {
 		if (vd->brightness->levels[i] == cur_level)
-			/*
-			 * The first two entries are special - see page 575
-			 * of the ACPI spec 3.0
-			 */
-			return i - 2;
+			return i - ACPI_VIDEO_FIRST_LEVEL;
 	}
 	return 0;
 }
 
 static int acpi_video_set_brightness(struct backlight_device *bd)
 {
-	int request_level = bd->props.brightness + 2;
+	int request_level = bd->props.brightness + ACPI_VIDEO_FIRST_LEVEL;
 	struct acpi_video_device *vd = bl_get_data(bd);
 
 	cancel_delayed_work(&vd->switch_brightness_work);
@@ -244,18 +264,18 @@ static const struct backlight_ops acpi_backlight_ops = {
 };
 
 /* thermal cooling device callbacks */
-static int video_get_max_state(struct thermal_cooling_device *cooling_dev, unsigned
-			       long *state)
+static int video_get_max_state(struct thermal_cooling_device *cooling_dev,
+			       unsigned long *state)
 {
 	struct acpi_device *device = cooling_dev->devdata;
 	struct acpi_video_device *video = acpi_driver_data(device);
 
-	*state = video->brightness->count - 3;
+	*state = video->brightness->count - ACPI_VIDEO_FIRST_LEVEL - 1;
 	return 0;
 }
 
-static int video_get_cur_state(struct thermal_cooling_device *cooling_dev, unsigned
-			       long *state)
+static int video_get_cur_state(struct thermal_cooling_device *cooling_dev,
+			       unsigned long *state)
 {
 	struct acpi_device *device = cooling_dev->devdata;
 	struct acpi_video_device *video = acpi_driver_data(device);
@@ -264,7 +284,8 @@ static int video_get_cur_state(struct thermal_cooling_device *cooling_dev, unsig
 
 	if (acpi_video_device_lcd_get_level_current(video, &level, false))
 		return -EINVAL;
-	for (offset = 2; offset < video->brightness->count; offset++)
+	for (offset = ACPI_VIDEO_FIRST_LEVEL; offset < video->brightness->count;
+	     offset++)
 		if (level == video->brightness->levels[offset]) {
 			*state = video->brightness->count - offset - 1;
 			return 0;
@@ -280,7 +301,7 @@ video_set_cur_state(struct thermal_cooling_device *cooling_dev, unsigned long st
 	struct acpi_video_device *video = acpi_driver_data(device);
 	int level;
 
-	if (state >= video->brightness->count - 2)
+	if (state >= video->brightness->count - ACPI_VIDEO_FIRST_LEVEL)
 		return -EINVAL;
 
 	state = video->brightness->count - state;
@@ -345,10 +366,12 @@ acpi_video_device_lcd_set_level(struct acpi_video_device *device, int level)
 	}
 
 	device->brightness->curr = level;
-	for (state = 2; state < device->brightness->count; state++)
+	for (state = ACPI_VIDEO_FIRST_LEVEL; state < device->brightness->count;
+	     state++)
 		if (level == device->brightness->levels[state]) {
 			if (device->backlight)
-				device->backlight->props.brightness = state - 2;
+				device->backlight->props.brightness =
+					state - ACPI_VIDEO_FIRST_LEVEL;
 			return 0;
 		}
 
@@ -530,14 +553,16 @@ acpi_video_bqc_value_to_level(struct acpi_video_device *device,
 
 	if (device->brightness->flags._BQC_use_index) {
 		/*
-		 * _BQC returns an index that doesn't account for
-		 * the first 2 items with special meaning, so we need
-		 * to compensate for that by offsetting ourselves
+		 * _BQC returns an index that doesn't account for the first 2
+		 * items with special meaning (see enum acpi_video_level_idx),
+		 * so we need to compensate for that by offsetting ourselves
 		 */
 		if (device->brightness->flags._BCL_reversed)
-			bqc_value = device->brightness->count - 3 - bqc_value;
+			bqc_value = device->brightness->count -
+				ACPI_VIDEO_FIRST_LEVEL - 1 - bqc_value;
 
-		level = device->brightness->levels[bqc_value + 2];
+		level = device->brightness->levels[bqc_value +
+		                                   ACPI_VIDEO_FIRST_LEVEL];
 	} else {
 		level = bqc_value;
 	}
@@ -571,7 +596,8 @@ acpi_video_device_lcd_get_level_current(struct acpi_video_device *device,
 
 			*level = acpi_video_bqc_value_to_level(device, *level);
 
-			for (i = 2; i < device->brightness->count; i++)
+			for (i = ACPI_VIDEO_FIRST_LEVEL;
+			     i < device->brightness->count; i++)
 				if (device->brightness->levels[i] == *level) {
 					device->brightness->curr = *level;
 					return 0;
@@ -714,9 +740,37 @@ static int acpi_video_bqc_quirk(struct acpi_video_device *device,
 
 	/*
 	 * Some systems always report current brightness level as maximum
-	 * through _BQC, we need to test another value for them.
+	 * through _BQC, we need to test another value for them. However,
+	 * there is a subtlety:
+	 *
+	 * If the _BCL package ordering is descending, the first level
+	 * (br->levels[2]) is likely to be 0, and if the number of levels
+	 * matches the number of steps, we might confuse a returned level to
+	 * mean the index.
+	 *
+	 * For example:
+	 *
+	 *     current_level = max_level = 100
+	 *     test_level = 0
+	 *     returned level = 100
+	 *
+	 * In this case 100 means the level, not the index, and _BCM failed.
+	 * Still, if the _BCL package ordering is descending, the index of
+	 * level 0 is also 100, so we assume _BQC is indexed, when it's not.
+	 *
+	 * This causes all _BQC calls to return bogus values causing weird
+	 * behavior from the user's perspective.  For example:
+	 *
+	 * xbacklight -set 10; xbacklight -set 20;
+	 *
+	 * would flash to 90% and then slowly down to the desired level (20).
+	 *
+	 * The solution is simple; test anything other than the first level
+	 * (e.g. 1).
 	 */
-	test_level = current_level == max_level ? br->levels[3] : max_level;
+	test_level = current_level == max_level
+		? br->levels[ACPI_VIDEO_FIRST_LEVEL + 1]
+		: max_level;
 
 	result = acpi_video_device_lcd_set_level(device, test_level);
 	if (result)
@@ -730,8 +784,8 @@ static int acpi_video_bqc_quirk(struct acpi_video_device *device,
 		/* buggy _BQC found, need to find out if it uses index */
 		if (level < br->count) {
 			if (br->flags._BCL_reversed)
-				level = br->count - 3 - level;
-			if (br->levels[level + 2] == test_level)
+				level = br->count - ACPI_VIDEO_FIRST_LEVEL - 1 - level;
+			if (br->levels[level + ACPI_VIDEO_FIRST_LEVEL] == test_level)
 				br->flags._BQC_use_index = 1;
 		}
 
@@ -761,7 +815,7 @@ int acpi_video_get_levels(struct acpi_device *device,
 		goto out;
 	}
 
-	if (obj->package.count < 2) {
+	if (obj->package.count < ACPI_VIDEO_FIRST_LEVEL) {
 		result = -EINVAL;
 		goto out;
 	}
@@ -773,8 +827,13 @@ int acpi_video_get_levels(struct acpi_device *device,
 		goto out;
 	}
 
-	br->levels = kmalloc((obj->package.count + 2) * sizeof *(br->levels),
-				GFP_KERNEL);
+	/*
+	 * Note that we have to reserve 2 extra items (ACPI_VIDEO_FIRST_LEVEL),
+	 * in order to account for buggy BIOS which don't export the first two
+	 * special levels (see below)
+	 */
+	br->levels = kmalloc((obj->package.count + ACPI_VIDEO_FIRST_LEVEL) *
+	                     sizeof(*br->levels), GFP_KERNEL);
 	if (!br->levels) {
 		result = -ENOMEM;
 		goto out_free;
@@ -788,7 +847,8 @@ int acpi_video_get_levels(struct acpi_device *device,
 		}
 		value = (u32) o->integer.value;
 		/* Skip duplicate entries */
-		if (count > 2 && br->levels[count - 1] == value)
+		if (count > ACPI_VIDEO_FIRST_LEVEL
+		    && br->levels[count - 1] == value)
 			continue;
 
 		br->levels[count] = value;
@@ -804,26 +864,29 @@ int acpi_video_get_levels(struct acpi_device *device,
 	 * In this case, the first two elements in _BCL packages
 	 * are also supported brightness levels that OS should take care of.
 	 */
-	for (i = 2; i < count; i++) {
-		if (br->levels[i] == br->levels[0])
+	for (i = ACPI_VIDEO_FIRST_LEVEL; i < count; i++) {
+		if (br->levels[i] == br->levels[ACPI_VIDEO_AC_LEVEL])
 			level_ac_battery++;
-		if (br->levels[i] == br->levels[1])
+		if (br->levels[i] == br->levels[ACPI_VIDEO_BATTERY_LEVEL])
 			level_ac_battery++;
 	}
 
-	if (level_ac_battery < 2) {
-		level_ac_battery = 2 - level_ac_battery;
+	if (level_ac_battery < ACPI_VIDEO_FIRST_LEVEL) {
+		level_ac_battery = ACPI_VIDEO_FIRST_LEVEL - level_ac_battery;
 		br->flags._BCL_no_ac_battery_levels = 1;
-		for (i = (count - 1 + level_ac_battery); i >= 2; i--)
+		for (i = (count - 1 + level_ac_battery);
+		     i >= ACPI_VIDEO_FIRST_LEVEL; i--)
 			br->levels[i] = br->levels[i - level_ac_battery];
 		count += level_ac_battery;
-	} else if (level_ac_battery > 2)
+	} else if (level_ac_battery > ACPI_VIDEO_FIRST_LEVEL)
 		ACPI_ERROR((AE_INFO, "Too many duplicates in _BCL package"));
 
 	/* Check if the _BCL package is in a reversed order */
-	if (max_level == br->levels[2]) {
+	if (max_level == br->levels[ACPI_VIDEO_FIRST_LEVEL]) {
 		br->flags._BCL_reversed = 1;
-		sort(&br->levels[2], count - 2, sizeof(br->levels[2]),
+		sort(&br->levels[ACPI_VIDEO_FIRST_LEVEL],
+		     count - ACPI_VIDEO_FIRST_LEVEL,
+		     sizeof(br->levels[ACPI_VIDEO_FIRST_LEVEL]),
 		     acpi_video_cmp_level, NULL);
 	} else if (max_level != br->levels[count - 1])
 		ACPI_ERROR((AE_INFO,
@@ -894,7 +957,7 @@ acpi_video_init_brightness(struct acpi_video_device *device)
 	 * level_old is invalid (no matter whether it's a level
 	 * or an index). Set the backlight to max_level in this case.
 	 */
-	for (i = 2; i < br->count; i++)
+	for (i = ACPI_VIDEO_FIRST_LEVEL; i < br->count; i++)
 		if (level == br->levels[i])
 			break;
 	if (i == br->count || !level)
@@ -906,7 +969,8 @@ acpi_video_init_brightness(struct acpi_video_device *device)
 		goto out_free_levels;
 
 	ACPI_DEBUG_PRINT((ACPI_DB_INFO,
-			  "found %d brightness levels\n", br->count - 2));
+	                  "found %d brightness levels\n",
+	                  br->count - ACPI_VIDEO_FIRST_LEVEL));
 	return 0;
 
 out_free_levels:
@@ -1297,7 +1361,7 @@ acpi_video_get_next_level(struct acpi_video_device *device,
 	max = max_below = 0;
 	min = min_above = 255;
 	/* Find closest level to level_current */
-	for (i = 2; i < device->brightness->count; i++) {
+	for (i = ACPI_VIDEO_FIRST_LEVEL; i < device->brightness->count; i++) {
 		l = device->brightness->levels[i];
 		if (abs(l - level_current) < abs(delta)) {
 			delta = l - level_current;
@@ -1307,7 +1371,7 @@ acpi_video_get_next_level(struct acpi_video_device *device,
 	}
 	/* Ajust level_current to closest available level */
 	level_current += delta;
-	for (i = 2; i < device->brightness->count; i++) {
+	for (i = ACPI_VIDEO_FIRST_LEVEL; i < device->brightness->count; i++) {
 		l = device->brightness->levels[i];
 		if (l < min)
 			min = l;
@@ -1680,7 +1744,8 @@ static void acpi_video_dev_register_backlight(struct acpi_video_device *device)
 
 	memset(&props, 0, sizeof(struct backlight_properties));
 	props.type = BACKLIGHT_FIRMWARE;
-	props.max_brightness = device->brightness->count - 3;
+	props.max_brightness =
+		device->brightness->count - ACPI_VIDEO_FIRST_LEVEL - 1;
 	device->backlight = backlight_device_register(name,
 						      parent,
 						      device,

drivers/acpi/battery.c

@@ -67,6 +67,7 @@ MODULE_DESCRIPTION("ACPI Battery Driver");
 MODULE_LICENSE("GPL");
 
 static async_cookie_t async_cookie;
+static bool battery_driver_registered;
 static int battery_bix_broken_package;
 static int battery_notification_delay_ms;
 static unsigned int cache_time = 1000;
@@ -93,6 +94,11 @@ static const struct acpi_device_id battery_device_ids[] = {
 
 MODULE_DEVICE_TABLE(acpi, battery_device_ids);
 
+/* Lists of PMIC ACPI HIDs with an (often better) native battery driver */
+static const char * const acpi_battery_blacklist[] = {
+	"INT33F4", /* X-Powers AXP288 PMIC */
+};
+
 enum {
 	ACPI_BATTERY_ALARM_PRESENT,
 	ACPI_BATTERY_XINFO_PRESENT,
@@ -1315,8 +1321,17 @@ static struct acpi_driver acpi_battery_driver = {
 
 static void __init acpi_battery_init_async(void *unused, async_cookie_t cookie)
 {
+	unsigned int i;
 	int result;
 
+	for (i = 0; i < ARRAY_SIZE(acpi_battery_blacklist); i++)
+		if (acpi_dev_present(acpi_battery_blacklist[i], "1", -1)) {
+			pr_info(PREFIX ACPI_BATTERY_DEVICE_NAME
+				": found native %s PMIC, not loading\n",
+				acpi_battery_blacklist[i]);
+			return;
+		}
+
 	dmi_check_system(bat_dmi_table);
 
 #ifdef CONFIG_ACPI_PROCFS_POWER
@@ -1329,6 +1344,7 @@ static void __init acpi_battery_init_async(void *unused, async_cookie_t cookie)
 	if (result < 0)
 		acpi_unlock_battery_dir(acpi_battery_dir);
 #endif
+	battery_driver_registered = (result == 0);
 }
 
 static int __init acpi_battery_init(void)
@@ -1343,8 +1359,10 @@ static int __init acpi_battery_init(void)
 static void __exit acpi_battery_exit(void)
 {
 	async_synchronize_cookie(async_cookie + 1);
+	if (battery_driver_registered)
 		acpi_bus_unregister_driver(&acpi_battery_driver);
 #ifdef CONFIG_ACPI_PROCFS_POWER
+	if (acpi_battery_dir)
 		acpi_unlock_battery_dir(acpi_battery_dir);
 #endif
 }

drivers/acpi/blacklist.c

@@ -188,6 +188,14 @@ static struct dmi_system_id acpi_rev_dmi_table[] __initdata = {
 		      DMI_MATCH(DMI_PRODUCT_NAME, "Latitude 3350"),
 		},
 	},
+	{
+	 .callback = dmi_enable_rev_override,
+	 .ident = "DELL Inspiron 7537",
+	 .matches = {
+		      DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+		      DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 7537"),
+		},
+	},
 #endif
 	{}
 };

drivers/acpi/cppc_acpi.c

@@ -132,49 +132,54 @@ __ATTR(_name, 0444, show_##_name, NULL)
 
 #define to_cpc_desc(a) container_of(a, struct cpc_desc, kobj)
 
+#define show_cppc_data(access_fn, struct_name, member_name)		\
+	static ssize_t show_##member_name(struct kobject *kobj,		\
+					struct attribute *attr,	char *buf) \
+	{								\
+		struct cpc_desc *cpc_ptr = to_cpc_desc(kobj);		\
+		struct struct_name st_name = {0};			\
+		int ret;						\
+									\
+		ret = access_fn(cpc_ptr->cpu_id, &st_name);		\
+		if (ret)						\
+			return ret;					\
+									\
+		return scnprintf(buf, PAGE_SIZE, "%llu\n",		\
+				(u64)st_name.member_name);		\
+	}								\
+	define_one_cppc_ro(member_name)
+
+show_cppc_data(cppc_get_perf_caps, cppc_perf_caps, highest_perf);
+show_cppc_data(cppc_get_perf_caps, cppc_perf_caps, lowest_perf);
+show_cppc_data(cppc_get_perf_caps, cppc_perf_caps, nominal_perf);
+show_cppc_data(cppc_get_perf_caps, cppc_perf_caps, lowest_nonlinear_perf);
+show_cppc_data(cppc_get_perf_ctrs, cppc_perf_fb_ctrs, reference_perf);
+show_cppc_data(cppc_get_perf_ctrs, cppc_perf_fb_ctrs, wraparound_time);
+
 static ssize_t show_feedback_ctrs(struct kobject *kobj,
 		struct attribute *attr, char *buf)
 {
 	struct cpc_desc *cpc_ptr = to_cpc_desc(kobj);
 	struct cppc_perf_fb_ctrs fb_ctrs = {0};
+	int ret;
 
-	cppc_get_perf_ctrs(cpc_ptr->cpu_id, &fb_ctrs);
+	ret = cppc_get_perf_ctrs(cpc_ptr->cpu_id, &fb_ctrs);
+	if (ret)
+		return ret;
 
 	return scnprintf(buf, PAGE_SIZE, "ref:%llu del:%llu\n",
 			fb_ctrs.reference, fb_ctrs.delivered);
 }
 define_one_cppc_ro(feedback_ctrs);
 
-static ssize_t show_reference_perf(struct kobject *kobj,
-		struct attribute *attr, char *buf)
-{
-	struct cpc_desc *cpc_ptr = to_cpc_desc(kobj);
-	struct cppc_perf_fb_ctrs fb_ctrs = {0};
-
-	cppc_get_perf_ctrs(cpc_ptr->cpu_id, &fb_ctrs);
-
-	return scnprintf(buf, PAGE_SIZE, "%llu\n",
-			fb_ctrs.reference_perf);
-}
-define_one_cppc_ro(reference_perf);
-
-static ssize_t show_wraparound_time(struct kobject *kobj,
-				struct attribute *attr, char *buf)
-{
-	struct cpc_desc *cpc_ptr = to_cpc_desc(kobj);
-	struct cppc_perf_fb_ctrs fb_ctrs = {0};
-
-	cppc_get_perf_ctrs(cpc_ptr->cpu_id, &fb_ctrs);
-
-	return scnprintf(buf, PAGE_SIZE, "%llu\n", fb_ctrs.ctr_wrap_time);
-
-}
-define_one_cppc_ro(wraparound_time);
-
 static struct attribute *cppc_attrs[] = {
 	&feedback_ctrs.attr,
 	&reference_perf.attr,
 	&wraparound_time.attr,
+	&highest_perf.attr,
+	&lowest_perf.attr,
+	&lowest_nonlinear_perf.attr,
+	&nominal_perf.attr,
 	NULL
 };
 
@@ -972,9 +977,9 @@ static int cpc_write(int cpu, struct cpc_register_resource *reg_res, u64 val)
 int cppc_get_perf_caps(int cpunum, struct cppc_perf_caps *perf_caps)
 {
 	struct cpc_desc *cpc_desc = per_cpu(cpc_desc_ptr, cpunum);
-	struct cpc_register_resource *highest_reg, *lowest_reg, *ref_perf,
-								 *nom_perf;
-	u64 high, low, nom;
+	struct cpc_register_resource *highest_reg, *lowest_reg,
+		*lowest_non_linear_reg, *nominal_reg;
+	u64 high, low, nom, min_nonlinear;
 	int ret = 0, regs_in_pcc = 0;
 
 	if (!cpc_desc) {
@@ -984,12 +989,12 @@ int cppc_get_perf_caps(int cpunum, struct cppc_perf_caps *perf_caps)
 
 	highest_reg = &cpc_desc->cpc_regs[HIGHEST_PERF];
 	lowest_reg = &cpc_desc->cpc_regs[LOWEST_PERF];
-	ref_perf = &cpc_desc->cpc_regs[REFERENCE_PERF];
-	nom_perf = &cpc_desc->cpc_regs[NOMINAL_PERF];
+	lowest_non_linear_reg = &cpc_desc->cpc_regs[LOW_NON_LINEAR_PERF];
+	nominal_reg = &cpc_desc->cpc_regs[NOMINAL_PERF];
 
 	/* Are any of the regs PCC ?*/
 	if (CPC_IN_PCC(highest_reg) || CPC_IN_PCC(lowest_reg) ||
-		CPC_IN_PCC(ref_perf) || CPC_IN_PCC(nom_perf)) {
+		CPC_IN_PCC(lowest_non_linear_reg) || CPC_IN_PCC(nominal_reg)) {
 		regs_in_pcc = 1;
 		down_write(&pcc_data.pcc_lock);
 		/* Ring doorbell once to update PCC subspace */
@@ -1005,10 +1010,13 @@ int cppc_get_perf_caps(int cpunum, struct cppc_perf_caps *perf_caps)
 	cpc_read(cpunum, lowest_reg, &low);
 	perf_caps->lowest_perf = low;
 
-	cpc_read(cpunum, nom_perf, &nom);
+	cpc_read(cpunum, nominal_reg, &nom);
 	perf_caps->nominal_perf = nom;
 
-	if (!high || !low || !nom)
+	cpc_read(cpunum, lowest_non_linear_reg, &min_nonlinear);
+	perf_caps->lowest_nonlinear_perf = min_nonlinear;
+
+	if (!high || !low || !nom || !min_nonlinear)
 		ret = -EFAULT;
 
 out_err:
@@ -1083,7 +1091,7 @@ int cppc_get_perf_ctrs(int cpunum, struct cppc_perf_fb_ctrs *perf_fb_ctrs)
 	perf_fb_ctrs->delivered = delivered;
 	perf_fb_ctrs->reference = reference;
 	perf_fb_ctrs->reference_perf = ref_perf;
-	perf_fb_ctrs->ctr_wrap_time = ctr_wrap_time;
+	perf_fb_ctrs->wraparound_time = ctr_wrap_time;
 out_err:
 	if (regs_in_pcc)
 		up_write(&pcc_data.pcc_lock);

drivers/acpi/internal.h

@@ -65,8 +65,6 @@ static inline void acpi_cmos_rtc_init(void) {}
 #endif
 int acpi_rev_override_setup(char *str);
 
-extern bool acpi_force_hot_remove;
-
 void acpi_sysfs_add_hotplug_profile(struct acpi_hotplug_profile *hotplug,
 				    const char *name);
 int acpi_scan_add_handler_with_hotplug(struct acpi_scan_handler *handler,

drivers/acpi/pmic/intel_pmic_chtwc.c

+/*
+ * Intel CHT Whiskey Cove PMIC operation region driver
+ * Copyright (C) 2017 Hans de Goede <hdegoede@redhat.com>
+ *
+ * Based on various non upstream patches to support the CHT Whiskey Cove PMIC:
+ * Copyright (C) 2013-2015 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/acpi.h>
+#include <linux/init.h>
+#include <linux/mfd/intel_soc_pmic.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include "intel_pmic.h"
+
+#define CHT_WC_V1P05A_CTRL		0x6e3b
+#define CHT_WC_V1P15_CTRL		0x6e3c
+#define CHT_WC_V1P05A_VSEL		0x6e3d
+#define CHT_WC_V1P15_VSEL		0x6e3e
+#define CHT_WC_V1P8A_CTRL		0x6e56
+#define CHT_WC_V1P8SX_CTRL		0x6e57
+#define CHT_WC_VDDQ_CTRL		0x6e58
+#define CHT_WC_V1P2A_CTRL		0x6e59
+#define CHT_WC_V1P2SX_CTRL		0x6e5a
+#define CHT_WC_V1P8A_VSEL		0x6e5b
+#define CHT_WC_VDDQ_VSEL		0x6e5c
+#define CHT_WC_V2P8SX_CTRL		0x6e5d
+#define CHT_WC_V3P3A_CTRL		0x6e5e
+#define CHT_WC_V3P3SD_CTRL		0x6e5f
+#define CHT_WC_VSDIO_CTRL		0x6e67
+#define CHT_WC_V3P3A_VSEL		0x6e68
+#define CHT_WC_VPROG1A_CTRL		0x6e90
+#define CHT_WC_VPROG1B_CTRL		0x6e91
+#define CHT_WC_VPROG1F_CTRL		0x6e95
+#define CHT_WC_VPROG2D_CTRL		0x6e99
+#define CHT_WC_VPROG3A_CTRL		0x6e9a
+#define CHT_WC_VPROG3B_CTRL		0x6e9b
+#define CHT_WC_VPROG4A_CTRL		0x6e9c
+#define CHT_WC_VPROG4B_CTRL		0x6e9d
+#define CHT_WC_VPROG4C_CTRL		0x6e9e
+#define CHT_WC_VPROG4D_CTRL		0x6e9f
+#define CHT_WC_VPROG5A_CTRL		0x6ea0
+#define CHT_WC_VPROG5B_CTRL		0x6ea1
+#define CHT_WC_VPROG6A_CTRL		0x6ea2
+#define CHT_WC_VPROG6B_CTRL		0x6ea3
+#define CHT_WC_VPROG1A_VSEL		0x6ec0
+#define CHT_WC_VPROG1B_VSEL		0x6ec1
+#define CHT_WC_V1P8SX_VSEL		0x6ec2
+#define CHT_WC_V1P2SX_VSEL		0x6ec3
+#define CHT_WC_V1P2A_VSEL		0x6ec4
+#define CHT_WC_VPROG1F_VSEL		0x6ec5
+#define CHT_WC_VSDIO_VSEL		0x6ec6
+#define CHT_WC_V2P8SX_VSEL		0x6ec7
+#define CHT_WC_V3P3SD_VSEL		0x6ec8
+#define CHT_WC_VPROG2D_VSEL		0x6ec9
+#define CHT_WC_VPROG3A_VSEL		0x6eca
+#define CHT_WC_VPROG3B_VSEL		0x6ecb
+#define CHT_WC_VPROG4A_VSEL		0x6ecc
+#define CHT_WC_VPROG4B_VSEL		0x6ecd
+#define CHT_WC_VPROG4C_VSEL		0x6ece
+#define CHT_WC_VPROG4D_VSEL		0x6ecf
+#define CHT_WC_VPROG5A_VSEL		0x6ed0
+#define CHT_WC_VPROG5B_VSEL		0x6ed1
+#define CHT_WC_VPROG6A_VSEL		0x6ed2
+#define CHT_WC_VPROG6B_VSEL		0x6ed3
+
+/*
+ * Regulator support is based on the non upstream patch:
+ * "regulator: whiskey_cove: implements Whiskey Cove pmic VRF support"
+ * https://github.com/intel-aero/meta-intel-aero/blob/master/recipes-kernel/linux/linux-yocto/0019-regulator-whiskey_cove-implements-WhiskeyCove-pmic-V.patch
+ */
+static struct pmic_table power_table[] = {
+	{
+		.address = 0x0,
+		.reg = CHT_WC_V1P8A_CTRL,
+		.bit = 0x01,
+	}, /* V18A */
+	{
+		.address = 0x04,
+		.reg = CHT_WC_V1P8SX_CTRL,
+		.bit = 0x07,
+	}, /* V18X */
+	{
+		.address = 0x08,
+		.reg = CHT_WC_VDDQ_CTRL,
+		.bit = 0x01,
+	}, /* VDDQ */
+	{
+		.address = 0x0c,
+		.reg = CHT_WC_V1P2A_CTRL,
+		.bit = 0x07,
+	}, /* V12A */
+	{
+		.address = 0x10,
+		.reg = CHT_WC_V1P2SX_CTRL,
+		.bit = 0x07,
+	}, /* V12X */
+	{
+		.address = 0x14,
+		.reg = CHT_WC_V2P8SX_CTRL,
+		.bit = 0x07,
+	}, /* V28X */
+	{
+		.address = 0x18,
+		.reg = CHT_WC_V3P3A_CTRL,
+		.bit = 0x01,
+	}, /* V33A */
+	{
+		.address = 0x1c,
+		.reg = CHT_WC_V3P3SD_CTRL,
+		.bit = 0x07,
+	}, /* V3SD */
+	{
+		.address = 0x20,
+		.reg = CHT_WC_VSDIO_CTRL,
+		.bit = 0x07,
+	}, /* VSD */
+/*	{
+		.address = 0x24,
+		.reg = ??,
+		.bit = ??,
+	}, ** VSW2 */
+/*	{
+		.address = 0x28,
+		.reg = ??,
+		.bit = ??,
+	}, ** VSW1 */
+/*	{
+		.address = 0x2c,
+		.reg = ??,
+		.bit = ??,
+	}, ** VUPY */
+/*	{
+		.address = 0x30,
+		.reg = ??,
+		.bit = ??,
+	}, ** VRSO */
+	{
+		.address = 0x34,
+		.reg = CHT_WC_VPROG1A_CTRL,
+		.bit = 0x07,
+	}, /* VP1A */
+	{
+		.address = 0x38,
+		.reg = CHT_WC_VPROG1B_CTRL,
+		.bit = 0x07,
+	}, /* VP1B */
+	{
+		.address = 0x3c,
+		.reg = CHT_WC_VPROG1F_CTRL,
+		.bit = 0x07,
+	}, /* VP1F */
+	{
+		.address = 0x40,
+		.reg = CHT_WC_VPROG2D_CTRL,
+		.bit = 0x07,
+	}, /* VP2D */
+	{
+		.address = 0x44,
+		.reg = CHT_WC_VPROG3A_CTRL,
+		.bit = 0x07,
+	}, /* VP3A */
+	{
+		.address = 0x48,
+		.reg = CHT_WC_VPROG3B_CTRL,
+		.bit = 0x07,
+	}, /* VP3B */
+	{
+		.address = 0x4c,
+		.reg = CHT_WC_VPROG4A_CTRL,
+		.bit = 0x07,
+	}, /* VP4A */
+	{
+		.address = 0x50,
+		.reg = CHT_WC_VPROG4B_CTRL,
+		.bit = 0x07,
+	}, /* VP4B */
+	{
+		.address = 0x54,
+		.reg = CHT_WC_VPROG4C_CTRL,
+		.bit = 0x07,
+	}, /* VP4C */
+	{
+		.address = 0x58,
+		.reg = CHT_WC_VPROG4D_CTRL,
+		.bit = 0x07,
+	}, /* VP4D */
+	{
+		.address = 0x5c,
+		.reg = CHT_WC_VPROG5A_CTRL,
+		.bit = 0x07,
+	}, /* VP5A */
+	{
+		.address = 0x60,
+		.reg = CHT_WC_VPROG5B_CTRL,
+		.bit = 0x07,
+	}, /* VP5B */
+	{
+		.address = 0x64,
+		.reg = CHT_WC_VPROG6A_CTRL,
+		.bit = 0x07,
+	}, /* VP6A */
+	{
+		.address = 0x68,
+		.reg = CHT_WC_VPROG6B_CTRL,
+		.bit = 0x07,
+	}, /* VP6B */
+/*	{
+		.address = 0x6c,
+		.reg = ??,
+		.bit = ??,
+	}  ** VP7A */
+};
+
+static int intel_cht_wc_pmic_get_power(struct regmap *regmap, int reg,
+		int bit, u64 *value)
+{
+	int data;
+
+	if (regmap_read(regmap, reg, &data))
+		return -EIO;
+
+	*value = (data & bit) ? 1 : 0;
+	return 0;
+}
+
+static int intel_cht_wc_pmic_update_power(struct regmap *regmap, int reg,
+		int bitmask, bool on)
+{
+	return regmap_update_bits(regmap, reg, bitmask, on ? 1 : 0);
+}
+
+/*
+ * The thermal table and ops are empty, we do not support the Thermal opregion
+ * (DPTF) due to lacking documentation.
+ */
+static struct intel_pmic_opregion_data intel_cht_wc_pmic_opregion_data = {
+	.get_power		= intel_cht_wc_pmic_get_power,
+	.update_power		= intel_cht_wc_pmic_update_power,
+	.power_table		= power_table,
+	.power_table_count	= ARRAY_SIZE(power_table),
+};
+
+static int intel_cht_wc_pmic_opregion_probe(struct platform_device *pdev)
+{
+	struct intel_soc_pmic *pmic = dev_get_drvdata(pdev->dev.parent);
+
+	return intel_pmic_install_opregion_handler(&pdev->dev,
+			ACPI_HANDLE(pdev->dev.parent),
+			pmic->regmap,
+			&intel_cht_wc_pmic_opregion_data);
+}
+
+static struct platform_device_id cht_wc_opregion_id_table[] = {
+	{ .name = "cht_wcove_region" },
+	{},
+};
+MODULE_DEVICE_TABLE(platform, cht_wc_opregion_id_table);
+
+static struct platform_driver intel_cht_wc_pmic_opregion_driver = {
+	.probe = intel_cht_wc_pmic_opregion_probe,
+	.driver = {
+		.name = "cht_whiskey_cove_pmic",
+	},
+	.id_table = cht_wc_opregion_id_table,
+};
+module_platform_driver(intel_cht_wc_pmic_opregion_driver);
+
+MODULE_DESCRIPTION("Intel CHT Whiskey Cove PMIC operation region driver");
+MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>");
+MODULE_LICENSE("GPL");

drivers/acpi/pmic/intel_pmic_xpower.c

@@ -18,7 +18,6 @@
 #include <linux/mfd/axp20x.h>
 #include <linux/regmap.h>
 #include <linux/platform_device.h>
-#include <linux/iio/consumer.h>
 #include "intel_pmic.h"
 
 #define XPOWER_GPADC_LOW	0x5b
@@ -186,28 +185,16 @@ static int intel_xpower_pmic_update_power(struct regmap *regmap, int reg,
  * @regmap: regmap of the PMIC device
  * @reg: register to get the reading
  *
- * We could get the sensor value by manipulating the HW regs here, but since
- * the axp288 IIO driver may also access the same regs at the same time, the
- * APIs provided by IIO subsystem are used here instead to avoid problems. As
- * a result, the two passed in params are of no actual use.
- *
  * Return a positive value on success, errno on failure.
  */
 static int intel_xpower_pmic_get_raw_temp(struct regmap *regmap, int reg)
 {
-	struct iio_channel *gpadc_chan;
-	int ret, val;
-
-	gpadc_chan = iio_channel_get(NULL, "axp288-system-temp");
-	if (IS_ERR_OR_NULL(gpadc_chan))
-		return -EACCES;
+	u8 buf[2];
 
-	ret = iio_read_channel_raw(gpadc_chan, &val);
-	if (ret < 0)
-		val = ret;
+	if (regmap_bulk_read(regmap, AXP288_GP_ADC_H, buf, 2))
+		return -EIO;
 
-	iio_channel_release(gpadc_chan);
-	return val;
+	return (buf[0] << 4) + ((buf[1] >> 4) & 0x0F);
 }
 
 static struct intel_pmic_opregion_data intel_xpower_pmic_opregion_data = {

drivers/acpi/scan.c

@@ -30,12 +30,6 @@ extern struct acpi_device *acpi_root;
 
 #define INVALID_ACPI_HANDLE	((acpi_handle)empty_zero_page)
 
-/*
- * If set, devices will be hot-removed even if they cannot be put offline
- * gracefully (from the kernel's standpoint).
- */
-bool acpi_force_hot_remove;
-
 static const char *dummy_hid = "device";
 
 static LIST_HEAD(acpi_dep_list);
@@ -170,9 +164,6 @@ static acpi_status acpi_bus_offline(acpi_handle handle, u32 lvl, void *data,
 			pn->put_online = false;
 		}
 		ret = device_offline(pn->dev);
-		if (acpi_force_hot_remove)
-			continue;
-
 		if (ret >= 0) {
 			pn->put_online = !ret;
 		} else {
@@ -241,11 +232,11 @@ static int acpi_scan_try_to_offline(struct acpi_device *device)
 		acpi_walk_namespace(ACPI_TYPE_ANY, handle, ACPI_UINT32_MAX,
 				    NULL, acpi_bus_offline, (void *)true,
 				    (void **)&errdev);
-		if (!errdev || acpi_force_hot_remove)
+		if (!errdev)
 			acpi_bus_offline(handle, 0, (void *)true,
 					 (void **)&errdev);
 
-		if (errdev && !acpi_force_hot_remove) {
+		if (errdev) {
 			dev_warn(errdev, "Offline failed.\n");
 			acpi_bus_online(handle, 0, NULL, NULL);
 			acpi_walk_namespace(ACPI_TYPE_ANY, handle,
@@ -263,8 +254,7 @@ static int acpi_scan_hot_remove(struct acpi_device *device)
 	unsigned long long sta;
 	acpi_status status;
 
-	if (device->handler && device->handler->hotplug.demand_offline
-	    && !acpi_force_hot_remove) {
+	if (device->handler && device->handler->hotplug.demand_offline) {
 		if (!acpi_scan_is_offline(device, true))
 			return -EBUSY;
 	} else {
@@ -1850,6 +1840,8 @@ static void acpi_bus_attach(struct acpi_device *device)
 			device->flags.power_manageable = 0;
 
 		device->flags.initialized = true;
+	} else if (device->flags.visited) {
+		goto ok;
 	}
 
 	ret = acpi_scan_attach_handler(device);
@@ -1866,10 +1858,10 @@ static void acpi_bus_attach(struct acpi_device *device)
 	if (ret < 0)
 		return;
 
-	if (ret > 0 || !device->pnp.type.platform_id)
-		acpi_device_set_enumerated(device);
-	else
+	if (device->pnp.type.platform_id)
 		acpi_default_enumeration(device);
+	else
+		acpi_device_set_enumerated(device);
 
  ok:
 	list_for_each_entry(child, &device->children, node)

drivers/acpi/sysfs.c

@@ -921,7 +921,7 @@ void acpi_sysfs_add_hotplug_profile(struct acpi_hotplug_profile *hotplug,
 static ssize_t force_remove_show(struct kobject *kobj,
 				 struct kobj_attribute *attr, char *buf)
 {
-	return sprintf(buf, "%d\n", !!acpi_force_hot_remove);
+	return sprintf(buf, "%d\n", 0);
 }
 
 static ssize_t force_remove_store(struct kobject *kobj,
@@ -935,9 +935,10 @@ static ssize_t force_remove_store(struct kobject *kobj,
 	if (ret < 0)
 		return ret;
 
-	lock_device_hotplug();
-	acpi_force_hot_remove = val;
-	unlock_device_hotplug();
+	if (val) {
+		pr_err("Enabling force_remove is not supported anymore. Please report to linux-acpi@vger.kernel.org if you depend on this functionality\n");
+		return -EINVAL;
+	}
 	return size;
 }
 

drivers/acpi/tables.c

@@ -310,22 +310,6 @@ acpi_parse_entries_array(char *id, unsigned long table_size,
 	return errs ? -EINVAL : count;
 }
 
-int __init
-acpi_parse_entries(char *id,
-			unsigned long table_size,
-			acpi_tbl_entry_handler handler,
-			struct acpi_table_header *table_header,
-			int entry_id, unsigned int max_entries)
-{
-	struct acpi_subtable_proc proc = {
-		.id		= entry_id,
-		.handler	= handler,
-	};
-
-	return acpi_parse_entries_array(id, table_size, table_header,
-			&proc, 1, max_entries);
-}
-
 int __init
 acpi_table_parse_entries_array(char *id,
 			 unsigned long table_size,

drivers/acpi/utils.c

@@ -736,6 +736,72 @@ bool acpi_dev_found(const char *hid)
 }
 EXPORT_SYMBOL(acpi_dev_found);
 
+struct acpi_dev_present_info {
+	struct acpi_device_id hid[2];
+	const char *uid;
+	s64 hrv;
+};
+
+static int acpi_dev_present_cb(struct device *dev, void *data)
+{
+	struct acpi_device *adev = to_acpi_device(dev);
+	struct acpi_dev_present_info *match = data;
+	unsigned long long hrv;
+	acpi_status status;
+
+	if (acpi_match_device_ids(adev, match->hid))
+		return 0;
+
+	if (match->uid && (!adev->pnp.unique_id ||
+	    strcmp(adev->pnp.unique_id, match->uid)))
+		return 0;
+
+	if (match->hrv == -1)
+		return 1;
+
+	status = acpi_evaluate_integer(adev->handle, "_HRV", NULL, &hrv);
+	if (ACPI_FAILURE(status))
+		return 0;
+
+	return hrv == match->hrv;
+}
+
+/**
+ * acpi_dev_present - Detect that a given ACPI device is present
+ * @hid: Hardware ID of the device.
+ * @uid: Unique ID of the device, pass NULL to not check _UID
+ * @hrv: Hardware Revision of the device, pass -1 to not check _HRV
+ *
+ * Return %true if a matching device was present at the moment of invocation.
+ * Note that if the device is pluggable, it may since have disappeared.
+ *
+ * Note that unlike acpi_dev_found() this function checks the status
+ * of the device. So for devices which are present in the dsdt, but
+ * which are disabled (their _STA callback returns 0) this function
+ * will return false.
+ *
+ * For this function to work, acpi_bus_scan() must have been executed
+ * which happens in the subsys_initcall() subsection. Hence, do not
+ * call from a subsys_initcall() or earlier (use acpi_get_devices()
+ * instead). Calling from module_init() is fine (which is synonymous
+ * with device_initcall()).
+ */
+bool acpi_dev_present(const char *hid, const char *uid, s64 hrv)
+{
+	struct acpi_dev_present_info match = {};
+	struct device *dev;
+
+	strlcpy(match.hid[0].id, hid, sizeof(match.hid[0].id));
+	match.uid = uid;
+	match.hrv = hrv;
+
+	dev = bus_find_device(&acpi_bus_type, NULL, &match,
+			      acpi_dev_present_cb);
+
+	return !!dev;
+}
+EXPORT_SYMBOL(acpi_dev_present);
+
 /*
  * acpi_backlight= handling, this is done here rather then in video_detect.c
  * because __setup cannot be used in modules.

drivers/power/supply/axp288_charger.c

@@ -14,6 +14,7 @@
  * GNU General Public License for more details.
  */
 
+#include <linux/acpi.h>
 #include <linux/module.h>
 #include <linux/device.h>
 #include <linux/regmap.h>
@@ -113,7 +114,8 @@
 #define ILIM_3000MA			3000	/* 3000mA */
 
 #define AXP288_EXTCON_DEV_NAME		"axp288_extcon"
-#define USB_HOST_EXTCON_DEV_NAME	"INT3496:00"
+#define USB_HOST_EXTCON_HID		"INT3496"
+#define USB_HOST_EXTCON_NAME		"INT3496:00"
 
 static const unsigned int cable_ids[] =
 	{ EXTCON_CHG_USB_SDP, EXTCON_CHG_USB_CDP, EXTCON_CHG_USB_DCP };
@@ -807,11 +809,15 @@ static int axp288_charger_probe(struct platform_device *pdev)
 		return -EPROBE_DEFER;
 	}
 
-	info->otg.cable = extcon_get_extcon_dev(USB_HOST_EXTCON_DEV_NAME);
+	if (acpi_dev_present(USB_HOST_EXTCON_HID, NULL, -1)) {
+		info->otg.cable = extcon_get_extcon_dev(USB_HOST_EXTCON_NAME);
 		if (info->otg.cable == NULL) {
 			dev_dbg(dev, "EXTCON_USB_HOST is not ready, probe deferred\n");
 			return -EPROBE_DEFER;
 		}
+		dev_info(&pdev->dev,
+			 "Using " USB_HOST_EXTCON_HID " extcon for usb-id\n");
+	}
 
 	platform_set_drvdata(pdev, info);
 	mutex_init(&info->lock);
@@ -849,6 +855,7 @@ static int axp288_charger_probe(struct platform_device *pdev)
 	/* Register for OTG notification */
 	INIT_WORK(&info->otg.work, axp288_charger_otg_evt_worker);
 	info->otg.id_nb.notifier_call = axp288_charger_handle_otg_evt;
+	if (info->otg.cable) {
 		ret = devm_extcon_register_notifier(&pdev->dev, info->otg.cable,
 					EXTCON_USB_HOST, &info->otg.id_nb);
 		if (ret) {
@@ -856,6 +863,7 @@ static int axp288_charger_probe(struct platform_device *pdev)
 			return ret;
 		}
 		schedule_work(&info->otg.work);
+	}
 
 	/* Register charger interrupts */
 	for (i = 0; i < CHRG_INTR_END; i++) {

include/acpi/acpi_bus.h

@@ -88,6 +88,7 @@ acpi_evaluate_dsm_typed(acpi_handle handle, const u8 *uuid, u64 rev, u64 func,
 	}
 
 bool acpi_dev_found(const char *hid);
+bool acpi_dev_present(const char *hid, const char *uid, s64 hrv);
 
 #ifdef CONFIG_ACPI
 

include/acpi/cppc_acpi.h

@@ -103,6 +103,7 @@ struct cppc_perf_caps {
 	u32 highest_perf;
 	u32 nominal_perf;
 	u32 lowest_perf;
+	u32 lowest_nonlinear_perf;
 };
 
 struct cppc_perf_ctrls {
@@ -115,7 +116,7 @@ struct cppc_perf_fb_ctrs {
 	u64 reference;
 	u64 delivered;
 	u64 reference_perf;
-	u64 ctr_wrap_time;
+	u64 wraparound_time;
 };
 
 /* Per CPU container for runtime CPPC management. */

include/linux/acpi.h

@@ -233,10 +233,6 @@ int acpi_numa_init (void);
 
 int acpi_table_init (void);
 int acpi_table_parse(char *id, acpi_tbl_table_handler handler);
-int __init acpi_parse_entries(char *id, unsigned long table_size,
-			      acpi_tbl_entry_handler handler,
-			      struct acpi_table_header *table_header,
-			      int entry_id, unsigned int max_entries);
 int __init acpi_table_parse_entries(char *id, unsigned long table_size,
 			      int entry_id,
 			      acpi_tbl_entry_handler handler,
@@ -611,6 +607,11 @@ static inline bool acpi_dev_found(const char *hid)
 	return false;
 }
 
+static inline bool acpi_dev_present(const char *hid, const char *uid, s64 hrv)
+{
+	return false;
+}
+
 static inline bool is_acpi_node(struct fwnode_handle *fwnode)
 {
 	return false;